Fits select 2003-2018 Dodge Ram 2500 and 3500 pickup trucks. This kit is designed to eliminate rear-end squat, trailer sway, and bottoming out during heavy towing and hauling. Does not fit cab and chassis applications.

The Air Lift LoadLifter 5000 kit (MPN 57295) provides up to 5,000 lbs. of load-leveling capacity to keep your heavy-duty truck level and stable. By distributing weight across all four tires, these air springs improve steering response and braking effectiveness while preventing poor headlight aim caused by rear-end sag. Each air spring is constructed like a tire with 2-ply reinforced fabric and features ultra high-strength nylon composite end caps that are corrosion-proof and lighter than steel.

This kit includes Air Lift’s exclusive upper and lower roll plates, which protect the air springs from sharp edges and increase load capacity by 10%. Fully adjustable from 5 to 100 PSI, this system allows you to tune your suspension for any load within the vehicle's GVWR. Every key component has been torture-tested for 1 million cycles on a hydraulic test rig to ensure long-term durability.

• Up to 5,000 lbs of load-leveling capacity
• Adjustable air pressure from 5 to 100 PSI
• 2-ply fabric reinforced rubber air springs
• Corrosion-proof nylon composite end caps
• Steel roll plates protect springs and increase capacity
• Includes all necessary mounting hardware and instructions
• Torture-tested to 1 million cycles
• Manufacturer Part Number: 57295

The Air Lift LoadLifter 5000 Air Spring Kit is engineered to provide up to 5,000 lbs of load-leveling capacity, making it the heaviest-rated solution for towing and hauling with pickup trucks, motorhomes, and commercial vehicles. By adding adjustable air support between the vehicle frame and the existing leaf springs, this system effectively eliminates rear-end sag, trailer sway, and bottoming out under heavy loads.

Constructed with rugged, durable air bellows and high-strength mounting hardware, the LoadLifter 5000 series allows for precise pressure adjustments from 5 to 100 PSI. This flexibility ensures a level ride height and improved handling regardless of whether the vehicle is fully loaded or empty. This kit (MPN 57292) is designed for straightforward installation and includes all necessary components for a complete setup.

• Up to 5,000 lbs of load-leveling capacity to maintain vehicle stability (Note: Do not exceed GVWR)
• Fully adjustable from 5 to 100 PSI for custom ride control
• Reduces strain on factory suspension and improves braking and steering performance
• Includes heavy-duty air springs, brackets, and all required installation hardware
• Manufacturer Part Number: 57292
• Limited Lifetime Warranty and 60-day ride satisfaction guarantee

Fits 1999-2007 Ford F-250 and F-350 Super Duty models (Base, XL, XLT, Lariat, King Ranch, and Harley-Davidson editions).

The Air Lift LoadLifter 5000 air spring kit (MPN 57291) provides up to 5,000 lbs of load-leveling capacity to restore ride height and stability when towing or hauling heavy payloads. By supporting the vehicle's suspension, these air springs eliminate common issues like rear-end squat, trailer sway, body roll, and bottoming out. This ensures more even weight distribution across all four tires, maintaining optimal steering and braking control for a safer towing experience.

• Load-leveling capacity: Up to 5,000 lbs (Note: Do not exceed GVWR)
• Adjustable pressure: 5 to 100 PSI for precise load management
• Construction: Reinforced air bellows for maximum durability
• Fittings: Quick-connect, easy-to-use polymer air fittings
• Compatibility Note: Only fits trucks equipped with B&W hitch part numbers 1105 and 1199R in the 49-inch position; minor modifications required to the hitch and upper bracket
• Manufacturer Part Number: 57291
• Includes: Reinforced bellows, brackets, air lines, hardware, and illustrated installation manual

Fits select 2014-2025 Ram 1500, 1500 Classic, 2500, 3500, and ProMaster 1500/2500/3500. Note: Does not fit vehicles equipped with factory air suspension.

The Air Lift LoadLifter 5000 Air Spring Kit (57289) is engineered to provide up to 5,000 lbs of load-leveling capacity for heavy-duty hauling and towing. By installing between the vehicle frame and the axle, these air springs eliminate rear-end sag, trailer sway, and bottoming out. This ensures your truck or van remains level, maintaining proper steering control, braking effectiveness, and headlight aim even when loaded to the manufacturer’s Gross Vehicle Weight Rating (GVWR).

Designed for durability in demanding environments, the LoadLifter 5000 series features rugged air springs and high-strength mounting hardware. The system is fully adjustable from 5 to 100 PSI, allowing you to increase pressure for heavy loads and decrease it for a smoother ride when empty.

• Up to 5,000 lbs of leveling capacity
• Adjustable air pressure from 5 to 100 PSI for custom load support
• Includes heavy-duty air springs, brackets, air lines, and installation hardware
• Reduces squat and improves stability during towing and hauling
• Manufacturer Part Number: 57289
• Backed by a Limited Lifetime Warranty and 60-day ride satisfaction guarantee

Fits select 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models, including Trail Boss, AT4, and Denali trims (does not fit vehicles with Adaptive Ride Control).

Restore stability and control when towing or hauling with the Air Lift LoadLifter 5000 kit. This air spring system provides up to 5,000 lbs of load-leveling capacity, effectively eliminating common issues like rear-end squat, trailer sway, body roll, and poor headlight aim. By maintaining a level vehicle profile, you ensure optimal braking and steering geometry, even under heavy loads. The air springs are fully adjustable from 5 to 100 PSI, allowing you to tune the ride height to your specific cargo requirements.

Engineered for durability, these air springs are constructed with 2-ply reinforced fabric similar to a tire and feature ultra-high-strength nylon composite end caps that resist corrosion. Each kit includes upper and lower roll plates to protect the bellows from sharp edges while increasing load capacity. Installation is straightforward, utilizing factory mounting points with common hand tools and no frame drilling required.

• Up to 5,000 lbs of load-leveling capacity
• Air adjustable from 5 to 100 PSI
• 2-ply reinforced fabric bellows for maximum strength
• Corrosion-proof nylon composite end caps
• Includes steel roll plates for added protection
• No-drill installation for 2019-2026 GM 1500 platforms
• Manufacturer Part Number: 57288

Fits select 2001-2010 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 (excludes Cab & Chassis and Quadrasteer models).

The Air Lift LoadLifter 5000 kit is designed to provide up to 5,000 lbs of load-leveling capacity, significantly improving vehicle stability when towing or hauling heavy loads. By utilizing fully adjustable air springs with a range of 5-100 PSI, this kit eliminates common issues such as rear-end sag (squat), poor headlight aim, trailer sway, and bottoming out. This ensures optimal weight distribution, maintaining consistent steering and braking control for a safer driving experience.

Engineered for durability under heavy-duty conditions, the air springs are constructed like a tire with 2-ply fabric reinforcement. The end caps are made from a high-strength, corrosion-proof nylon composite that offers the strength of steel without the weight. Each kit features Air Lift’s exclusive upper and lower roll plates, which protect the bellows from sharp edges and increase the load-bearing surface area. To guarantee long-term reliability, these components have been hydraulic-tested for 1 million cycles.

• Manufacturer Part Number: 57275
• Load-leveling capacity: Up to 5,000 lbs
• Adjustable air pressure: 5 to 100 PSI
• 2-ply fabric reinforced air springs
• Corrosion-proof nylon composite end caps
• Includes upper and lower roll plates to protect air springs
• No-drill installation: No metal drilling or grinding required for factory components
• Does not fit Cab & Chassis applications
• Will not fit vehicles equipped with Quadrasteer

Fits select 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks.

The Air Lift LoadLifter 5000 air helper spring kit is engineered to restore vehicle stability and ride quality when towing or hauling heavy loads. By mounting these air springs between the vehicle frame and the rear axle, you gain up to 5,000 lbs of load-leveling capacity, effectively eliminating rear-end sag, trailer sway, and bottoming out. This kit provides the support needed to maintain proper headlight aim and steering control under load.

This system is fully adjustable from 5 to 100 PSI, allowing you to fine-tune the suspension for any cargo weight or trailer tongue load. Constructed with rugged, reinforced rubber bellows and durable mounting hardware, it is built for severe-duty use in pickup trucks, motor homes, and commercial applications. Installation is straightforward with the included fully-illustrated manual and hardware.

• Up to 5,000 lbs of load-leveling capacity (Do not exceed vehicle GVWR)
• Air adjustable from 5 to 100 PSI for precise control
• Reduces vehicle sag, sway, and bottoming out
• Requires 6 inches of clearance between the tire and the frame
• Manufacturer Part Number: 57272
• Note: Does not fit models equipped with Quadrasteer

Fits 2021-2026 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe, and Wildtrak).

The Air Lift LoadLifter 5000 air spring kit is engineered to provide up to 5,000 lbs of load-leveling capacity, transforming your Ford Bronco into a more capable towing and hauling platform. By maintaining a level ride height, these air springs eliminate common suspension issues like rear-end squat, trailer sway, poor headlight aim, and bottoming out. Fully adjustable from 5 to 100 PSI, this system allows you to fine-tune the suspension for any load, ensuring optimal weight distribution and improved steering and braking control.

Construction features include 2-ply fabric-reinforced air springs for maximum durability and high-strength nylon composite end caps that are lighter than steel and completely corrosion-proof. The kit includes upper and lower roll plates to protect the air springs from sharp edges and increase overall durability. To ensure professional-grade reliability, Air Lift torture-tests these components for 1 million cycles on a hydraulic rig.

• Up to 5,000 lbs of load-leveling capacity (never exceed GVWR)
• Fully adjustable pressure from 5 to 100 PSI
• Heavy-duty 2-ply reinforced air spring construction
• Corrosion-resistant nylon composite end caps and steel roll plates
• Comprehensive kit includes brackets, air lines, and hardware
• Torture-tested to 1 million cycles for long-term durability
• Manufacturer Part Number: 57269

Fits 2023-2026 Toyota Sequoia (SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro).

The Air Lift LoadLifter 5000 air spring kit (MPN 57264) provides up to 5,000 lbs. of load-leveling capacity, ensuring your vehicle remains level and stable under heavy loads. Designed to eliminate common towing issues like rear-end squat, trailer sway, poor headlight aim, and bottoming out, this kit restores proper weight distribution for improved steering and braking control during hauls.

Built for durability, these air springs feature 2-ply reinforced fabric construction similar to a tire. The ultra-high-strength nylon composite end caps provide a lightweight, corrosion-proof alternative to steel. Each kit includes upper and lower roll plates to protect the bellows from sharp edges and increase the load-bearing surface area for long-term reliability.

• Up to 5,000 lbs. of load-leveling capacity for heavy towing and hauling
• Fully adjustable air pressure from 5 to 100 PSI for precise load support
• Heavy-duty 2-ply reinforced air springs with nylon composite end caps
• Bolt-on design uses factory mounting points with no drilling required
• Upper and lower roll plates protect air springs from damage
• Torture-tested to 1 million cycles on a hydraulic test rig
• Includes all necessary brackets, air lines, and installation hardware
• Manufacturer Part Number: 57264

Fits 2019-2025 Ram 3500 trucks, including Big Horn, Laramie, Limited, Limited Longhorn, Lone Star, SLT, Special Service, and Tradesman models.

Regain control and stability when hauling heavy loads with the Air Lift LoadLifter 5000 air spring kit (MPN 57263). Designed specifically for the Ram 3500, this kit provides up to 5,000 pounds of load-leveling capacity, effectively eliminating rear-end squat, trailer sway, and bottoming out. The air springs are fully adjustable from 5 to 100 PSI, allowing you to tune the suspension for everything from empty beds to maximum GVWR payloads.

Engineered for durability, these air springs feature 2-ply fabric reinforcement similar to a tire and are capped with high-strength, corrosion-proof nylon composite end caps. The system includes upper and lower roll plates to protect the bellows from sharp edges and increase load capacity. The underframe design ensures compatibility with most in-bed hitches, making it a versatile solution for fifth-wheel or gooseneck towing.

• Up to 5,000 lbs of load-leveling capacity
• Fully adjustable 5-100 PSI for precise leveling control
• 2-ply fabric reinforced air springs for maximum strength
• High-strength, corrosion-proof nylon composite end caps
• Upper and lower roll plates protect springs from wear
• Torture-tested to 1 million cycles for long-term reliability
• Includes all necessary hardware and clear installation instructions
• Manufacturer Part Number: 57263

Fits select 1999-2007 Chevrolet Silverado and GMC Sierra 1500 HD, 2500, and 1500 HD Classic models.

The Air Lift LoadLifter 5000 Air Spring Kit is engineered to restore vehicle stability and safety when towing or hauling heavy loads. By mounting between the frame and the axle, these air helper springs provide up to 5,000 lbs of load-leveling capacity, effectively eliminating rear-end sag, trailer sway, and bottoming out. The system is fully adjustable from 5 to 100 PSI, allowing you to tune the spring rate specifically to your cargo weight for a more comfortable and controlled ride.

Designed for severe-duty use, the LoadLifter 5000 is Air Lift's heaviest-rated kit for 3/4-ton and 1-ton truck applications. Please note: this kit is not compatible with vehicles equipped with Quadrasteer steering systems.

• Load Capacity: Up to 5,000 lbs of leveling support (do not exceed vehicle GVWR)
• Pressure Range: 5-100 PSI adjustable range
• Construction: Rugged air springs with durable mounting brackets and hardware
• Installation: Replaces factory bump stops and bolts to the vehicle frame
• Includes: Two air springs, mounting brackets, air lines, and all necessary installation hardware
• MPN: 57250

Fits select 2019-2025 Ram 1500, 2500, 3500, ProMaster, and ProMaster City.

The Air Lift LoadLifter 5000 air spring kit (MPN 57231) provides up to 5,000 lbs of load-leveling capacity, engineered to eliminate common towing issues like rear-end sag, trailer sway, and bottoming out. By distributing weight across all four tires, these air springs improve steering and braking response while keeping your headlights properly aimed under heavy loads. The underframe design is compatible with most in-bed hitches, making it a versatile solution for heavy-duty hauling.

Built for durability and long-term performance, these air springs are constructed with 2-ply reinforced fabric, similar to a tire's sidewall. The end caps are made from an ultra-high-strength nylon composite formula that provides the strength of steel while remaining lightweight and completely corrosion-proof. Each kit includes upper and lower roll plates to protect the bellows from sharp edges and increase overall load capacity.

• Up to 5,000 lbs of load-leveling capacity
• Fully adjustable air pressure from 5 to 100 PSI for precise control
• Heavy-duty 2-ply fabric reinforced air springs
• Corrosion-proof nylon composite end caps
• No-drill installation on most applications
• Torture-tested to 1 million cycles for maximum reliability
• Includes all necessary mounting hardware and instructions
• Manufacturer Part Number: 57231

Fits 2002-2008 Dodge Ram 1500 including Laramie, SLT, Sport, ST, SXT, and TRX4.

The Air Lift LoadLifter 5000 air helper spring kit (MPN 57230) provides up to 5,000 lbs of load-leveling capacity to eliminate rear-end sag, trailer sway, and bottoming out. Designed for heavy-duty towing and hauling, these air springs mount between the vehicle frame and the axle to support your factory suspension. By keeping the vehicle level, this kit improves steering response, braking safety, and headlight aim while protecting your tires from uneven wear.

Each kit features heavy-duty, 2-ply fabric-reinforced air springs that are fully adjustable from 5 to 100 PSI. This allows you to increase pressure when towing a trailer or hauling a heavy bed load and decrease it for a smooth ride when empty. Built with rugged, durable components, the LoadLifter 5000 is engineered for reliable service in demanding environments.

• Up to 5,000 lbs of load-leveling capacity (never exceed GVWR)
• 2-ply fabric reinforced air springs for superior durability
• Fully adjustable air pressure from 5 to 100 PSI
• Eliminates suspension sag, sway, and bottoming out
• Includes all necessary brackets, air lines, and installation hardware
• Manufacturer Part Number: 57230
• Limited Lifetime Warranty and 60-day Ride Satisfaction Guarantee

Fits select 2016-2023 Nissan Titan XD and 2023 Ford Transit-250.

The Air Lift LoadLifter 5000 Air Spring Kit (MPN 57229) provides up to 5,000 lbs of load-leveling capacity to eliminate common towing issues like rear-end squat, trailer sway, and bottoming out. Designed for heavy-duty hauling, these air springs allow for precise adjustment between 5-100 PSI to maintain a level vehicle height, ensuring optimal headlight aim and improved steering and braking control under load.

• 5,000 lbs load-leveling capacity for heavy towing and hauling
• Bellows constructed with 2-ply fabric reinforcement for tire-like durability
• Ultra-high strength nylon composite end caps are corrosion-proof and lighter than steel
• Exclusive upper and lower roll plates protect springs from sharp edges and increase load capacity by 10%
• Fully adjustable from 5 to 100 PSI for customized vehicle support
• Torture-tested to 1 million cycles on a hydraulic test rig for long-term reliability
• Simple bolt-on installation requires only common hand tools and no frame drilling

Each kit includes two air springs, brackets, roll plates, air lines, and all necessary mounting hardware. This kit is backed by a Limited Lifetime Warranty and a 60-Day Ride Satisfaction Guarantee.

Fits 2004-2014 Ford F-150 pickups (XL, XLT, STX, FX2, Lariat, King Ranch, Platinum, Limited, and Harley-Davidson Edition).

The Air Lift LoadLifter 5000 air suspension kit is engineered to provide up to 5,000 lbs. of load-leveling capacity, making it a critical upgrade for half-ton Ford F-150 owners who regularly tow heavy trailers or haul significant bed loads. By adding adjustable air springs to your rear suspension, this kit eliminates common towing issues such as rear-end squat, trailer sway, and bottoming out. These air springs improve overall vehicle safety and comfort by keeping your headlights aimed at the road and restoring steering and braking control under load.

Built with rugged components, the LoadLifter 5000 kit is designed to work in tandem with your factory leaf springs. Each kit includes heavy-duty bellows-style air springs and all necessary mounting hardware for a straightforward installation. The air springs are fully adjustable, allowing you to fine-tune the pressure based on your specific load requirements.

• Manufacturer Part Number: 57228
• Load-leveling capacity: Up to 5,000 lbs. (Do not exceed vehicle GVWR)
• Eliminates squat, trailer sway, and rough ride
• Fully adjustable air pressure for precise leveling
• Includes air springs, brackets, and all required installation hardware
• Limited Lifetime Warranty

Fits select 1988-2000 Chevrolet and GMC C/K/R/V 1500, 2500, and 3500 trucks (including 454 SS, Sierra, and Silverado trims).

The Air Lift LoadLifter 5000 air spring kit provides up to 5,000 lbs of load-leveling capacity to eliminate the common hazards of heavy towing and hauling. This kit is designed to solve rear-end squat, trailer sway, body roll, and bottoming out by distributing weight across all four tires. By maintaining a level vehicle height, this system ensures optimal headlight aim, steering response, and braking control under load.

Engineered for durability, these air springs are constructed like a tire with 2-ply reinforced fabric and ultra-high-strength nylon composite end caps that are lighter than steel and entirely corrosion-proof. Air Lift includes exclusive upper and lower roll plates that protect the air springs from sharp edges while increasing load capacity by 10%. Note: This is a side-mount kit and is not compatible with vehicles equipped with in-bed hitches.

• Load Capacity: Up to 5,000 lbs of leveling support (do not exceed GVWR)
• Adjustability: Fully adjustable from 5 to 100 PSI for precise control
• Construction: 2-ply fabric reinforced air springs with nylon composite end caps
• Protection: Includes upper and lower roll plates to shield springs from wear
• Testing: Torture-tested to 1 million cycles on a hydraulic test rig
• Mounting: Side-mount installation; replaces/augments factory suspension components
• MPN: 57216

Each kit comes complete with air springs, roll plates, air lines, and all necessary hardware for a secure installation.

Fits select 1965-2002 Chevrolet, GMC, Dodge, and Ford pickups.

The Air Lift LoadLifter 5000 air spring kit (MPN 57215) provides up to 5,000 lbs of load-leveling capacity, significantly improving vehicle stability and safety while towing or hauling heavy loads. By distributing weight evenly across all tires, this kit eliminates common suspension issues such as rear-end squat, trailer sway, body roll, and bottoming out. These fully adjustable springs allow for 5-100 PSI of air pressure, ensuring your truck remains level regardless of the cargo weight.

• Up to 5,000 lbs of load-leveling capacity to maintain proper ride height.
• 2-ply reinforced fabric air springs built with tire-like construction for maximum durability.
• Ultra high-strength nylon composite end caps are corrosion-proof and lighter than steel.
• Exclusive upper and lower roll plates protect the air springs from abrasion and sharp edges.
• Side mount kit configuration (Note: Not compatible with in-bed hitches; drilling may be required).
• Tested to 1 million cycles on hydraulic test rigs for proven longevity.
• Includes all necessary mounting hardware and a fully illustrated installation manual.

Fits 2005-2012 Ford F-250 and F-350 Super Duty trucks across all submodels including XL, XLT, Lariat, and King Ranch.

The Air Lift LoadLifter 5000 air spring kit is engineered to provide up to 5,000 lbs. of load-leveling capacity for your heavy-duty truck, ensuring a safer and more stable ride when towing or hauling heavy payloads. This side-mount kit installs between the vehicle frame and the existing springs to eliminate rear-end sag, trailer sway, and bottoming out. Built for commercial-grade service, these 2-ply fabric-reinforced springs are fully adjustable from 5 to 100 PSI, allowing you to fine-tune the suspension support based on your specific load requirements.

• High-Capacity Support: Provides up to 5,000 lbs. of leveling capacity to maintain proper ride height under load (within manufacturer's GVWR).
• Reinforced Construction: Features 2-ply fabric-reinforced air springs for maximum durability and long-term reliable service.
• Adjustable Pressure: Pressure range of 5 to 100 PSI allows for complete control over ride comfort and load support.
• Side-Mount Design: Specifically engineered as a side-mount kit for compatible Ford Super Duty chassis.
• Complete Installation: Includes all necessary brackets, air springs, and hardware for a bolt-on installation.
• Manufacturer Part Number: 57212
• Warranty: Protected by a limited lifetime warranty and a 60-day ride satisfaction guarantee.

Fits select 1996-2025 Chevrolet Express 2500/3500, G30 and GMC Savana 2500/3500, G3500 passenger vans with boxed frames.

The Air Lift LoadLifter 5000 air spring kit is engineered to restore vehicle stability and safety when towing or hauling heavy loads. By providing up to 5,000 lbs of load-leveling capacity, these 2-ply fabric reinforced air springs eliminate common issues such as rear-end sag, trailer sway, and bottoming out. This kit installs between the vehicle's boxed frame and the existing leaf springs, allowing you to maintain a level stance and improved steering control regardless of cargo weight.

Adjustable from 5 to 100 PSI, the LoadLifter 5000 system allows you to tune the air pressure to your specific load requirements. This ensures a comfortable, controlled ride when loaded while providing the flexibility to reduce pressure for a smoother ride when the vehicle is empty.

• Up to 5,000 lbs of load-leveling capacity (do not exceed vehicle GVWR)
• Heavy-duty 2-ply fabric reinforced air springs for long-term durability
• Air adjustable from 5 to 100 PSI for precise load management
• Reduces trailer sway, squat, and headlight aim drift
• Compatible with passenger vans specifically equipped with a boxed frame
• Manufacturer Part Number: 57205
• Includes all necessary hardware and fully illustrated installation manual

Fits 2007-2019 Chevrolet Silverado 1500, 2019 Silverado 1500 LD, and 2007-2018 GMC Sierra 1500.

The Air Lift LoadLifter 5000 air spring kit (57204) provides up to 5,000 lbs of load-leveling capacity to eliminate common towing issues such as vehicle squat, trailer sway, and bottoming out. By restoring level ride height, these air springs ensure proper headlight aim and maintain optimal steering and braking control when hauling heavy loads.

Built for durability, the kit features 2-ply reinforced fabric air springs with high-strength, corrosion-proof nylon composite end caps. An Air Lift exclusive, the included upper and lower roll plates protect the bellows from sharp edges and increase the load capacity by 10%. To ensure long-term reliability, the key suspension components have been torture-tested to 1 million cycles on a hydraulic test rig.

• Up to 5,000 lbs of load-leveling capacity (do not exceed vehicle GVWR)
• Fully adjustable air pressure from 5 to 100 PSI
• 2-ply fabric reinforced bellows for maximum strength
• High-strength nylon composite end caps are lighter and corrosion-resistant
• Protective roll plates increase capacity and shield air springs
• Simple installation using common hand tools
• Includes air springs, roll plates, and all required hardware
• Manufacturer Part Number: 57204

Fits 2004-2014 Ford F-150 trucks. The Air Lift LoadLifter 5000 air spring kit provides up to 5,000 lbs of load-leveling capacity, designed to eliminate rear-end squat, trailer sway, and bottoming out when towing or hauling heavy loads. By restoring proper ride height, this kit ensures optimal braking and steering control while maintaining correct headlight aim.

• Load Capacity: Up to 5,000 lbs of leveling support (never exceed GVWR).
• Adjustability: Fully adjustable from 5 to 100 PSI for precise control based on load weight.
• Durability: Built with 2-ply fabric reinforced air springs and ultra-high-strength nylon composite end caps for corrosion resistance.
• Protection: Includes exclusive upper and lower roll plates to protect the air springs from sharp edges and increase load capacity.
• Reliability: Suspension components are torture-tested to 1 million cycles on a hydraulic rig for maximum longevity.
• Installation: Bolt-on installation using common hand tools with no frame drilling required.

Each LoadLifter 5000 kit (MPN 57200) includes air springs, roll plates, brackets, and all necessary hardware for a complete installation. Backed by a limited lifetime warranty and a 60-day ride satisfaction guarantee.

Fits select 1999-2005 Ford F-250 Super Duty, F-350 Super Duty, and Ford Excursion models.

The Air Lift LoadLifter 5000 (MPN 57154) is a heavy-duty air helper spring system designed to level your truck or SUV under significant loads. By installing these air springs between the factory leaf springs and the vehicle frame, you can eliminate common towing issues such as rear-end sag, trailer sway, and frequent bottoming out. The kit uses 2-ply fabric-reinforced bellows to provide up to 5,000 lbs of load-leveling capacity, ensuring a safer and more stable ride while towing or hauling.

• Up to 5,000 lbs of load-leveling capacity (do not exceed manufacturer's GVWR).
• Fully adjustable air pressure from 5 to 100 PSI for precise control over ride height and comfort.
• Constructed with rugged, 2-ply fabric-reinforced air springs for maximum durability.
• Simple bolt-on installation with all necessary hardware and fully-illustrated instructions included.
• Helps improve steering and braking response by maintaining proper weight distribution.
• Manufacturer Part Number: 57154

Vehicle Fitment:

The Air Lift 52300 LoadLifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit allows owners of existing LoadLifter 5000 series air springs to upgrade their hardware to professional-grade specifications. This kit replaces standard nylon lines with 10 feet of braided stainless steel air line, providing significantly better protection against road debris, abrasion, and exhaust heat while maintaining the system's 5,000 lbs of load-leveling capacity.

Engineered for high-duty cycle towing and hauling, the kit features military-grade AN fittings to ensure a permanent, leak-free connection that outperforms standard push-to-connect hardware. These components are designed to withstand the rigors of heavy-duty use and have been torture-tested on hydraulic rigs to ensure long-term reliability. Installation is a straightforward process requiring only common hand tools with no frame drilling required.

• 10 feet of braided stainless steel air line for superior heat and debris resistance
• Military-grade AN fittings for secure, high-pressure seals
• Designed specifically for LoadLifter 5000 series air spring kits
• Eliminates common points of failure for improved towing safety and comfort
• Torture-tested for durability and longevity
• Manufacturer Part Number: 52300
• Limited lifetime warranty