Restore critical crankshaft end play on your Volkswagen 1.0L-1.9L engine with this set of ACL Standard Size Thrust Washers. Engineered to precise OE specifications, these thrust washers are essential for controlling the crankshaft's lateral movement within the engine block.

Properly functioning thrust washers prevent excessive crankshaft walk, which can lead to premature bearing wear and catastrophic engine failure. This standard size set provides a direct replacement for worn factory components, ensuring the correct end play clearance is maintained for reliable engine operation.

• Controls crankshaft end play
• Standard size for OE fitment
• Direct replacement for worn factory thrust washers
• Manufacturer Part Number: 2T1644-STD

Critical for proper crankshaft end play, ACL Standard Size Thrust Washers manage the crankshaft's axial movement within the engine block. These precision-engineered thrust washers are designed to replace worn original equipment (OE) components, preventing excessive lateral play that can lead to premature bearing wear and catastrophic engine damage.

• Manufacturer Part Number: 2T1149-STD
• Fitment: Specifically designed for Mitsubishi 6G72 V6 2.9L (2972cc) engines.
• Size: Standard Size, ensuring compatibility with factory tolerances and specifications.
• Function: Maintains correct crankshaft end float, essential for long-term engine reliability.

Replacing your thrust washers with a quality set like ACL's ensures the crankshaft operates within its intended parameters, protecting your main bearings and overall engine health. Opting for standard size maintains the original factory clearances, crucial for rebuilds adhering to OE specifications.

This ACL Standard Size Thrust Washer is an essential component for maintaining proper crankshaft end play in Toyota 2AZFE (2.4L) engines. Thrust washers are critical in controlling the crankshaft's axial movement, absorbing the thrust loads generated during engine operation. This prevents excessive wear on the crankshaft, main bearings, and other rotating assemblies.

Manufactured to standard specifications, this thrust washer ensures a direct, precision-fit replacement for your worn original equipment (OE) component. It is engineered to meet the demanding requirements of engine builders and ensures reliable long-term performance.

• Engine Fitment: Toyota 2AZFE (2.4L)
• Size: Standard
• Manufacturer Part Number: 1T8412-STD

This ACL Standard Size Thrust Washer is engineered for Mazda B6/BP/BP-T 1.6L/1.8L engines, specifically supporting 1.8L applications. In any engine rebuild, maintaining correct crankshaft end play is critical for long-term durability and smooth operation. This thrust washer precisely controls the crankshaft's axial movement, preventing excessive lateral play that can lead to premature bearing wear and catastrophic engine failure.

Manufactured to standard OEM dimensions, this thrust washer ensures a direct fit and proper clearance within the engine block. It replaces worn or damaged original equipment thrust washers, restoring the correct crankshaft end play specifications vital for engine health.

• Maintains critical crankshaft end play
• Replaces worn OEM thrust washer
• Manufactured to standard dimensions for direct fitment
• Manufacturer Part Number: 1T8353-STD

The ACL Standard Size Thrust Washer is a precision-engineered component critical for maintaining optimal crankshaft end-play in Mitsubishi 4G93 1834CC engines. This washer is designed to manage the crankshaft's axial movement, preventing excessive lateral play which can lead to premature wear of main bearings and other rotating assemblies. During an engine rebuild, replacing worn thrust washers with a standard size unit ensures crankshaft position is restored to original factory specifications, crucial for engine longevity and performance.

This thrust washer effectively absorbs axial thrust loads, minimizing friction and wear across the crankshaft and main bearing caps. It is a direct replacement, designed to integrate seamlessly during an engine overhaul or repair.

• Specifically engineered for the Mitsubishi 4G93 1834CC engine
• Manages crankshaft end-play to factory specifications
• Essential for protecting main bearings from axial load wear
• Replaces worn OEM thrust washers
• Manufacturer Part Number: ACL 1T8037-STD

This ACL thrust washer set is engineered for Chrysler 5.7L 345 Hemi V8 engines manufactured from 2003 and newer. Crankshaft thrust washers are critical components that control crankshaft end play, preventing excessive axial movement. They maintain a precise oil film between the crankshaft and engine block, minimizing friction and wear.

When rebuilding a 5.7L Hemi, replacing the thrust washers is essential to ensure correct tolerances and long-term durability. This standard size set provides a direct replacement for worn or damaged original equipment (OE) washers.

• Fitment: Chrysler 5.7L 345 Hemi V8 (2003+)
• Size: Standard
• Material: Aluminum Tin Bearing Alloy
• Function: Controls crankshaft end play, minimizes friction
• Manufacturer Part Number: 1T611S-STD

Maintain proper crankshaft end play and prevent excessive axial movement in your Nissan SR20DE/DET (2.0L) GTiR engine with this ACL Standard Size Thrust Washer. Thrust washers are critical components that absorb the fore-aft forces exerted on the crankshaft, protecting the main bearings and ensuring long-term engine health.

This standard size thrust washer is designed to restore factory specifications during an engine rebuild, providing precise fitment and reliable performance. It replaces the original equipment thrust washer directly.

• Application: Nissan SR20DE/DET (2.0L) GTiR engines
• Size: Standard
• ACL Part Number: 1T2964-STD

The ACL GTR Standard Size Thrust Washer (MPN: 1T2505-STD) is an essential component engineered to control crankshaft end play within your engine's rotating assembly. Thrust washers are critical for preventing excessive axial movement of the crankshaft, which can otherwise lead to premature wear on main bearings and other vital engine components due to axial loads.

Designed for precision and durability in demanding applications, this standard size thrust washer ensures proper clearance and optimal engine function during rebuilds where original specifications are maintained. It provides a direct replacement for the factory-spec thrust washer, restoring crucial axial control to the crankshaft.

• Part Type: Thrust Washer
• Size: Standard
• Manufacturer Part Number: 1T2505-STD

Fits select 1986-2012 Honda and Acura models, including Integra, Civic, Accord, Prelude, CR-V, and RDX (D16, B17, B18, K20, K24, and H22 engines).

Maintain precise control over crankshaft axial movement with the ACL Standard Size Thrust Washer. Designed for both high-performance builds and reliable OE-spec engine refreshes, this thrust washer ensures proper crankshaft end play, preventing excessive wear on engine components and maintaining internal alignment under load. Precision-engineered to meet strict automotive tolerances, it is a direct replacement for worn factory washers in Honda B, D, K, and H series engines.

• Manufacturer Part Number: 1T1957-STD
• Size: Standard Size (STD)
• Optimizes crankshaft end play for improved engine longevity
• Manufactured for consistent thickness and durability
• Replaces original thrust washers in B17, B18, K20, K24, H22, and D16 engine series

The ACL Standard Size Crankshaft Thrust Washer is engineered to precisely control the axial movement (endplay) of the crankshaft in select Honda 2156cc engines. This critical component ensures proper alignment and prevents excessive fore and aft motion, which is essential for maintaining bearing integrity and overall engine longevity.

Designed to exacting specifications, this standard size thrust washer restores factory clearances, making it ideal for engine rebuilds or replacements where the original crankshaft and block saddle are within OE tolerances. Trust ACL's reputation for high-quality engine components to provide reliable performance and extend the life of your engine.

• Application: Specifically designed for Honda 2156cc engines
• Size: Standard size for restoring factory clearances
• Function: Controls crankshaft axial movement and endplay
• Manufacturer Part Number: ACL 1T1937-STD

This ACL Standard Size Thrust Washer is engineered as a direct replacement for your worn or damaged factory unit, critical for maintaining proper crankshaft end play in Toyota 1ZZFE and 2ZZGE engines from 1998 and newer. Thrust washers absorb the axial loads placed on the crankshaft, preventing excessive front-to-back movement that can lead to premature wear of other vital engine components.

• Engineered to standard factory dimensions
• Direct replacement for OEM thrust washer
• Critical component for crankshaft axial load management
• Manufacturer Part Number: 1T1853-STD

Properly maintaining crankshaft end play is essential for engine longevity and performance. This ACL thrust washer helps restore precise clearances, ensuring reliable operation of your Toyota 1ZZFE or 2ZZGE engine.

Maintain critical crankshaft end play with the ACL Standard Size Thrust Washer, engineered for precise fitment in 2008 and newer Mitsubishi Lancer Evolution X (4B11T) and Hyundai Genesis models equipped with the 4B11T engine.

A thrust washer is a vital component in your engine's rotating assembly, specifically designed to control the crankshaft's axial movement within its journals. By limiting fore and aft motion, this washer prevents excessive wear on the crankshaft, block, and other bearing surfaces, ensuring long-term engine health and performance.

• Size: Standard Size, ideal for crankshafts that have not been machined and require factory specification end play.
• MPN: 1T1237-STD
• Vehicle Fitment: 2008+ Mitsubishi Lancer Evolution X (4B11T), 2008+ Hyundai Genesis (4B11T)

Choosing a standard size thrust washer ensures accurate factory tolerances are restored, providing reliable operation and protecting your engine's internals from damaging movement.

The ACL Standard Size Thrust Washer (MPN: 1T1219-STD) is engineered to precisely control crankshaft end play in Mitsubishi 4G63 and 4G64 7-bolt engines, specifically found in the EVO V through IX models. This critical engine component prevents excessive axial movement of the crankshaft, which is vital for maintaining proper clearances and preventing premature wear on main bearings and other rotating assembly components.

When rebuilding or maintaining a high-performance engine like the 4G63/4G64, replacing wear items such as thrust washers is crucial. This ACL thrust washer is manufactured to OE specifications for standard size applications, ensuring a precise fit and reliable performance under demanding conditions. Proper crankshaft end play is essential for long-term engine durability and consistent power delivery.

• Application: Mitsubishi 4G63/4G64 7-Bolt EVO V-IX engines
• Size: Standard
• Manufacturer Part Number: 1T1219-STD

Fits 2009-2024 Nissan GT-R models, including Base, Premium, Black Edition, Track Edition, Nismo, and T-spec variants.

This ACL high-performance main bearing set is designed for precision engine builds requiring standard sizing on Version 4 blocks. Engineered to withstand the high loads and increased RPMs common in modified GT-R applications, these bearings provide the durability and oil clearance consistency necessary for reliable crankshaft support. Whether you are performing a routine refresh or a complete performance rebuild, this kit ensures your VR-series bottom end remains stable under pressure.

• Part Type: Main Bearing Set
• Sizing: Standard (STD)
• Block Compatibility: Version 4 Block
• Application: High Performance / Race
• Manufacturer Part Number: 1M2505H-STD-4

Fits select 2009-2024 Nissan GT-R models (3.8L V6) across all trims including Nismo, Premium, and Track Edition.

Engineered for the extreme tolerances of high-output VR38DETT builds, this ACL High Performance Main Bearing Set provides the essential durability required for competition and high-performance street use. These bearings are specifically designed for the Version 2 Nissan GT-R engine block, featuring a tri-metal construction that offers superior load-carrying capacity and fatigue resistance compared to standard OE components.

• Manufacturer Part Number: 1M2505H-STD-2
• Application: Nissan GT-R (R35) Version 2 Engine Blocks
• Sizing: Standard (STD) Size
• Material: High-strength tri-metal for improved thermal conductivity and durability
• Context: Essential for engine overhauls or performance upgrades where bearing reliability is critical

Fits 2009-2024 Nissan GT-R models (all trims including Premium, Nismo, and Track Edition).

The ACL High Performance Main Bearing Set is engineered to meet the extreme demands of the Nissan VR38DETT engine. This standard-sized (STD) set is specifically designed for Version 1 blocks, providing the necessary fatigue strength and precise tolerances required for high-performance builds and heavy engine loads. These bearings ensure reliable crankshaft support and consistent oil film thickness, protecting critical rotating components during high-RPM operation.

• Manufacturer Part Number: 1M2505H-STD-1
• Bearing Type: Main Bearing Set
• Size: Standard (STD)
• Block Compatibility: Version 1
• Construction: High-strength performance materials for increased durability
• Application: 2009-2024 Nissan GT-R

Fits select 2008-2023 Audi A3, Q3, S3, TT, TTS and Volkswagen Arteon, Atlas, Beetle, CC, Eos, Golf, GTI, Jetta, Passat, and Tiguan models.

Engineered for high-stress environments, the ACL High Performance Rod Bearing Set (1B5562H-STD) provides the durability and fatigue resistance required for modified engines and spirited driving. These standard-size bearings are designed to handle higher loads and RPMs than typical OE replacements, making them a critical upgrade during an engine rebuild or performance overhaul.

• Manufacturer Part Number: 1B5562H-STD
• Bearing Size: Standard (STD)
• Application: Connecting Rods
• Construction: High-strength tri-metal design for improved load capacity
• Compatible with a wide range of Audi and Volkswagen TFSI/TSI engines

Fits select 2009-2024 Nissan GT-R models across all trims including Nismo, Premium, Black Edition, and Track Edition.

These ACL connecting rod bearings are engineered for the high-performance demands of the GT-R's engine, providing the precision and durability required for enthusiast or track use. This specific part (MPN: 1B2500H-STD-1) is supplied as a single pair of bearings. Please note that a complete engine rebuild for the VR38DETT requires a total of 6 pairs.

• Manufacturer Part Number: 1B2500H-STD-1
• Bearing Size: Standard (STD)
• Quantity: One (1) Pair (Must order 6 for a full set)
• Construction: High-performance materials designed for increased load capacity
• Fitment: Designed specifically for the Nissan GT-R engine architecture

Fits the 1995 Volkswagen EuroVan Camper and other select 1983-1995 VW/Audi 4-cylinder and 5-cylinder engines (1780-1983cc).

This ACL Engine Connecting Rod Bearing Set is precision-engineered to restore reliable operation to your engine's rotating assembly. Designed as a direct replacement for worn factory bearings, this set (MPN 1B1606H-STD) ensures proper oil clearance and critical crankshaft protection. These bearings are essential for any engine overhaul or bottom-end refresh, providing the durability required for consistent performance.

• Manufacturer Part Number: 1B1606H-STD
• Engine Compatibility: 4-cylinder and 5-cylinder (1780cc to 1983cc)
• Standard (STD) size for original equipment journal specifications
• High-strength construction for enhanced fatigue resistance and friction reduction
• Engineered to meet or exceed OE tolerances for a precise fit

Fits 2006-2010 BMW M5 and M6 (5.0L).

Engineered for the high-revving BMW S85B50 V10 engine, this ACL Race Series performance rod bearing set is designed to meet the demands of high-performance driving. This specific "HX" series set provides an additional 0.025mm (0.001") of oil clearance compared to standard bearings. This increased clearance is a preferred choice for builders looking to improve oil flow and lubrication under high loads, providing a critical safeguard for the S85 engine's bottom end.

• Manufacturer Part Number: 10B1580HX-STD
• Engine Fitment: BMW S85B50 5.0L V10
• Bearing Size: Standard Size
• Clearance Spec: .001in (.025mm) Extra Oil Clearance (Thinner)
• Quantity: Full set for one engine (10 journal pairs)

Fits 2006-2010 BMW M5 and M6 Base models equipped with the S85B50 5.0L V10 engine.

This ACL Performance Rod Bearing Set is a critical upgrade for the high-revving BMW S85 engine, designed to provide the durability and load-carrying capacity required for performance driving. Engineered to replace worn factory components, these bearings utilize a tri-metal construction to handle the high-RPM demands and thermal stresses unique to the V10 powertrain. Precision manufacturing ensures consistent oil clearance and reliable crankshaft protection.

• Standard (STD) size for original equipment specifications
• High-strength tri-metal design for superior fatigue resistance
• Hardened steel backs to maintain bearing crush and retention
• Optimized for the high-revving S85B50 V10 engine architecture
• Manufacturer Part Number: 10B1580H-STD