Fits select 1978-1990 Jeep CJ5, CJ7, Scrambler, and Wrangler YJ.

The Omix Heater Motor Seal is an essential direct-fit replacement designed to maintain the efficiency of your Jeep's HVAC system. This seal mounts between the heater blower motor and the firewall, preventing air leaks and ensuring that the blower motor delivers maximum airflow into the cabin. Over time, original foam seals dry out and crumble, leading to temperature loss and poor HVAC performance.

Constructed from high-quality foam rubber to match original equipment specifications, this seal provides the necessary compression to eliminate gaps. It is a critical component for any heater box restoration or blower motor replacement to ensure your climate control system functions as intended.

• Durable foam rubber construction resists degradation from heat and moisture
• Precision OE-style cut for a direct-fit application
• Seals the blower motor to the firewall to prevent air loss
• Replaces original equipment part number 5462710
• Manufacturer Part Number: 17908.02
• Limited 5-Year Warranty

Fits 1987-1995 Jeep Wrangler YJ models including Base, Islander, Laredo, Renegade, Rio Grande, Sahara, SE, and Sport.

This Omix replacement heater defroster hose is engineered to restore efficient airflow to your windshield. Over time, original plastic ducting often becomes brittle and cracks, leading to poor defrosting performance and reduced cabin comfort. This direct-fit component restores the critical connection between the heater case and the windshield defroster duct.

• Oval-shaped duct hose designed for factory-accurate routing
• Direct-fit OE style replacement for simple installation
• Replaces original equipment part number: 56001472
• Manufacturer Part Number: 17907.07
• Back by a limited 5-year manufacturer warranty

Fits 1978-1986 Jeep CJ5, CJ7, and Scrambler models. This Omix replacement defroster duct deflector pair is engineered to restore factory-spec heating and A/C performance by directing critical airflow toward the windshield for moisture removal and clear visibility. Over decades, factory plastic ducts often become brittle and crack; these OE-style replacements provide a direct fit to ensure your ventilation system remains sealed and efficient.

Precision-molded for an exact fit in the dash assembly, these deflectors are manufactured to meet or exceed original equipment standards. Each set includes both the driver and passenger side components, allowing for a complete overhaul of the upper dash ducting system.

• Replaces OE Part Number: 5750340K
• Material: High-quality molded plastic
• Dimensions: 15-5/8 inch overall length and 1 inch depth
• Sold as a pair (LH and RH)
• Installation: Direct fit mounting to factory points
• Manufacturer Part Number: 17907.04
• Warranty: Limited 5-year manufacturer warranty

Fits 1978-1986 Jeep CJ5, CJ7, and Scrambler (CJ8) models.

Restore proper airflow to your windshield with the Omix replacement defroster duct. Over decades of heat cycles and dashboard exposure, original plastic ducts often become brittle, crack, or warp, leading to lost defrosting performance and reduced visibility. This direct-fit component is designed to replace factory unit 5461591, ensuring your heater and A/C system can effectively clear moisture and frost from the glass.

Constructed from durable molded plastic, this duct features a 5.5 x 2.5-inch input and an 11 x 1.75-inch output for a precise interface with the CJ ventilation system. It bolts directly to the factory mounting points for a straightforward installation that requires no modifications to the dash structure.

• Direct replacement for OE part number 5461591
• Precision molded plastic construction
• Input Diameter: 5.5 in. x 2.5 in.
• Output Dimensions: 11 in. x 1.75 in.
• Compatible with 17907.02 defroster hose (sold separately)
• Manufacturer Part Number: 17907.03
• Limited 5-year warranty

Fits 1978-1986 Jeep CJ5, CJ7, and Scrambler (CJ8).

Restore efficient airflow to your Jeep's windshield with this Omix Heater Defroster Hose. Over time, original ducting can crack, dry rot, or collapse, resulting in poor defrosting performance. This direct-fit replacement is engineered to OE specifications, ensuring your heating and ventilation system functions at peak efficiency. It features integrated clamps for a secure, leak-free connection to the heater box and defroster duct.

• Direct-fit replacement for OE part number 5462328
• Integrated clamps for a secure, easy installation
• Inlet/Outlet dimensions: 5-1/4 in. x 3 in.
• Fully extended length: 9-3/4 in.
• OE-style construction for factory-correct fitment
• Limited 5-year manufacturer warranty
• Manufacturer Part Number: 17907.02

Fits 1955-1977 Jeep CJ3, CJ5, CJ6, CJ7 and Willys CJ-3, CJ-5, and CJ-6 models.

Restore the efficiency of your vintage Jeep's heating and ventilation system with this direct-fit replacement defroster duct from Omix. Over time, original ducts can become brittle, cracked, or clogged, preventing proper airflow to the windshield. This OE-style duct ensures moisture is removed effectively for a clear view of the road in all weather conditions. It is engineered to factory specifications for a seamless installation using existing mounting points.

• Direct replacement for a precise, hassle-free fit
• OE-style construction and finish
• Outlet dimensions: 14-1/8 inches x 2 inches
• Inlet diameter: 2-3/4 inches
• Replaces original equipment number: M1111
• Manufacturer Part Number: 17907.01
• Limited 5-year manufacturer warranty

Fits 1991-1995 Jeep Wrangler YJ (Base, Islander, Renegade, Rio Grande, S, Sahara, SE).

Restore precise control over your Jeep's ventilation with the Omix Heater Defroster Cable. Over time, factory HVAC cables can stretch, bind, or snap, leaving your blend doors stuck and your defrost or floor vents inoperable. This direct-fit replacement is engineered to match OE specifications for smooth operation and reliable climate control.

Built by Omix, a brand dedicated to maintaining Jeep heritage, this cable features the correct red end clip for easy identification and installation within the dashboard assembly. It replaces worn or broken factory cables to ensure your heater and A/C system functions at its best.

• Direct-fit OE style replacement ensures proper fitment and function
• Features identifying red end clip
• Overall length: 26.75 inches
• Replaces OE part number: 55036908
• Manufacturer Part Number: 17905.06
• Backed by a limited 5-year warranty

Fits 1987-1995 Jeep Wrangler (YJ) including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport models.

Restore precise climate adjustment in your cabin with the Omix Temperature Control Cable. This direct-fit replacement connects your dashboard controls to the heater valve, resolving issues with sticking, binding, or unresponsive temperature sliders. Built to OE specifications for fit and finish, this cable provides the tactile feedback and smooth operation required for reliable heater and A/C system performance.

• Direct-fit replacement for factory part number 55036907
• Features the specific blue end clip for correct system identification
• Overall length: 43.75 inches
• OE-style construction ensures compatibility with factory dash mounting points
• Manufacturer Part Number: 17905.05
• Limited 5-year warranty

Fits select 1978-1986 Jeep CJ5, CJ7, and Scrambler models.

Restore full functionality to your vehicle's heating and ventilation system with this Omix Heater Cable Kit. Over decades of use, factory heater cables often become stiff, seized, or snapped, leaving you unable to adjust cabin temperatures or defrost settings. This 3-piece kit is engineered as a direct OE-style replacement, ensuring smooth movement and precise control from your dashboard knobs to the heater box and fresh air vents.

Built to meet or exceed original equipment standards, each cable features the correct length, mounting ends, and durable sheathing for a straightforward installation in factory housings. This comprehensive kit addresses the most common failure points in the Jeep CJ HVAC system, making it an essential upgrade for any restoration project or functional repair.

• Direct fit for 1978-1986 Jeep CJ models
• Kit includes: Defroster cable, temperature control cable, and fresh air cable
• 3-piece set replaces original equipment part number 5463657K
• Maintains factory look and dash control operation
• Manufacturer Part Number: 17905.04
• Limited 5-year manufacturer warranty

Fits 1978-1990 Jeep CJ5, CJ7, CJ8 Scrambler, and Wrangler YJ. This Omix replacement heater blower motor restores reliable cabin airflow and climate control functionality to your vintage Jeep's HVAC system. Designed as a 3-speed, OE-style direct replacement, this motor ensures proper circulation through the heater and A/C vents.

• Replaces OE Part Number: 4761520
• 3-Speed operation for variable airflow control
• Mounting plate diameter: 6.75 inches
• Motor housing diameter: 3.125 inches
• Required firewall hole diameter: 3.15 inches
• Direct fit installation for factory heating units
• Manufacturer Part Number: 17904.02
• Limited 5-Year Warranty

Note: For a complete installation, use firewall-to-blower motor seal part number 17908.02 (sold separately).

Fits 1987-1995 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport models).

Restore the heating and defrosting performance of your Jeep with this direct-fit replacement heater core from Omix. Engineered to meet or exceed original equipment standards, this aluminum core provides efficient heat exchange to maintain cabin comfort during cold weather operation. It is designed for a straightforward installation into the factory HVAC housing, utilizing the original mounting points and connections.

• Manufacturer Part Number: 17901.03
• Replaces OE Number: 56001459
• Core Material: Aluminum
• Inlet/Outlet Size: 5/8-inch
• Core Dimensions: 9-3/16 in. x 6-1/8 in. x 1-3/8 in.
• Style: Direct Fit OE Replacement
• Warranty: Limited 5-Year Manufacturer Warranty

Fits 1972-1977 Jeep CJ5, CJ6, and CJ7 models.

Restore efficient cabin heating to your vintage Jeep with this Omix replacement heater core. Built to match original equipment dimensions and flow characteristics, this heater core addresses leaks and poor thermal transfer caused by corrosion or blockage in aging factory units. As a direct-fit component, it installs into the factory heater box without modification, ensuring your heating system maintains optimal performance in cold weather.

• Direct replacement for OE part number: 8125123
• Core Width: 9.25 inches
• Core Height: 6.00 inches
• Core Thickness: 1.25 inches
• Construction: OE-style materials and design
• Manufacturer Part Number: 17901.01
• Warranty: Limited 5-Year Warranty