The Turbosmart FCD-2 Electronic Fuel Cut Defender is a precision-engineered solution for enthusiasts looking to increase boost levels beyond factory-calibrated limits without triggering the vehicle's OEM fuel cut or safety limp mode. By intercepting the signal between the MAP (Manifold Absolute Pressure) or AFM (Air Flow Meter) sensor and the ECU, this electronic module allows you to run higher boost pressures while maintaining a safe, stable signal to the factory computer.

• Function: Clamps the sensor voltage at a user-defined level, preventing the ECU from detecting boost spikes that exceed the factory limit.
• Construction: Designed and manufactured at Turbosmart's Sydney, Australia facility with strict quality control and rigorous testing.
• Control: Fully adjustable electronic circuitry for precise signal manipulation.
• Installation: Hard-wires directly into the factory engine loom for a secure, reliable connection.
• Manufacturer Part Number: TS-0303-1002

The FCD-2 is essential for modified turbocharged vehicles where the factory ECU's fuel cut logic prevents the engine from reaching its full potential under increased boost. Each unit is built with the same attention to detail that has made Turbosmart a standard in the performance community since 1997.

The Turbosmart FCD-1 (Pneumatic) is a specialized tuning component designed to prevent the factory ECU from triggering a fuel cut when boost levels are increased beyond the stock MAP sensor's limits. This device functions by accurately clamping the pressure signal sent to the engine management system, allowing you to run higher boost pressures safely without the interruption of fuel delivery.

• Prevents factory ECU fuel cut triggered by over-boost conditions
• Adjustable pneumatic design allows for precise pressure signal clamping
• Essential for turbo setups where factory MAP sensors limit performance gains
• Robust construction tested to rigorous quality standards in Sydney, Australia
• Manufacturer Part Number: TS-0303-1001

The Turbosmart 3-Port Solenoid Kit (TS-0301-3003) is a high-performance replacement component for eBoost2 and eBoost Street electronic boost controllers. Engineered for precision and rapid response, this 3-port solenoid is also fully compatible with a wide range of aftermarket and motorsport ECU control strategies that utilize PWM boost control.

Constructed to withstand the thermal stress of high-performance engine bays, this kit includes nickel-plated fittings and an integrated anti-vibration mount to maintain reliability during hard use. The 1/8 NPT ports provide a universal interface for various plumbing configurations, while the unterminated flying lead simplifies integration into custom wiring harnesses.

• Manufacturer Part Number: TS-0301-3003
• Configuration: 3-Port Solenoid
• Port Size: 1/8 NPT Female
• Fittings Included: Nickel-plated hose ends for 6mm (1/4") ID hose
• Wiring: 2-Wire flying lead (unterminated)
• Mounting: Anti-vibration rubber isolator mount included
• Application: Turbosmart eBoost2, eBoost Street, and PWM-capable standalone ECUs

The Turbosmart eBoost2 (eB2) Re-Loom Kit, part number TS-0301-3002, is a comprehensive refresh package designed specifically for the eBoost2 electronic boost controller. This kit provides all the essential components required to repair or reinstall your boost management system, ensuring accurate electrical signals and maintaining vacuum integrity.

This kit is ideal for users moving their eBoost2 unit to a new vehicle or for those replacing damaged wiring and hoses. By using genuine Turbosmart components, you ensure the controller maintains the precise communication and pressure sensing required for consistent turbocharger performance.

• Designed specifically for the Turbosmart eBoost2 (eB2) series
• Includes a complete replacement electrical wiring loom
• Includes replacement vacuum lines and all necessary fittings
• Restores factory-level reliability to your boost control system
• Manufacturer Part Number: TS-0301-3002

The Turbosmart eBoost2 66mm Dash Mounting Kit provides a professional and secure solution for installing your electronic boost controller on any flat interior surface. Whether mounting to the dashboard or center console, this adjustable bracket ensures the gauge is positioned for optimal driver visibility and accessibility.

Constructed for durability and a clean finish, the mount allows for precise tilt and swivel adjustments to eliminate glare and improve line-of-sight monitoring. This kit is a direct fit for 66mm eBoost2 units and replaces temporary or less secure mounting solutions with a rigid, fastener-secured base.

• Designed specifically for the 66mm Turbosmart eBoost2 boost controller
• Adjustable swivel base for optimized viewing angles
• Versatile installation on dashboards, trim panels, or other flat surfaces
• Includes all necessary fasteners and hardware for a complete installation
• Manufacturer Part Number: TS-0301-2013

The Turbosmart eB2 4-Port Solenoid is a precision upgrade engineered for use with Turbosmart eBoost2 and eBoost Street boost controllers. By moving to a 4-port configuration, tuners gain significantly more control over the wastegate actuator, allowing for a wider boost range and the ability to execute complex boost-by-gear or boost-by-RPM strategies. This solenoid is specifically designed to handle the high temperatures and vibration levels found in motorsport and high-performance street applications.

This kit includes nickel-plated fittings and an anti-vibration mount to ensure long-term reliability. The 4-port design is especially beneficial for high-pressure setups where a standard 3-port solenoid may lack the necessary resolution to manage gate pressure effectively against high backpressure.

• Manufacturer Part Number: TS-0301-2003
• Port Type: 1/8 NPT Female
• Fittings: Nickel-plated hose ends for 6mm (1/4") ID hose
• Wiring: 2-Wire flying lead loom (unterminated)
• Mounting: Includes specialized anti-vibration mount
• Compatibility: Optimized for Turbosmart eBoost2 and eBoost Street controllers

The PERRIN Pro Electronic Boost Control Solenoid fits 2015-2020 Subaru WRX STI models, including Base, Launch Edition, Limited, and Series.HyperBlue. This performance-grade upgrade is designed to replace the stock solenoid, providing the speed and precision required for advanced boost management and tuning on the EJ257 platform.

Engineered for faster response times and more consistent pressure handling than factory plastic units, the PERRIN Pro series solenoid allows tuners to dial in more complex boost curves. This 3-port design ensures your turbocharger hits target boost levels efficiently and maintains stability throughout the powerband, making it an essential component for high-output builds.

• Fits 2015-2020 Subaru WRX STI (All Trim Levels)
• Replaces restrictive OE solenoid for improved response
• 3-port design for more precise and stable boost control
• Ideal for tuned vehicles running higher-than-stock boost levels
• Direct-fit design with specific electrical connector
• Manufacturer Part Number: ASM-TAC-731

Fits 2008-2014 Subaru Impreza WRX, including Limited and Premium submodels.

The PERRIN Pro Electronic Boost Control Solenoid (EBCS) is engineered to provide the fast response and precise management required for modern turbocharged Boxer engines. This high-performance solenoid replaces the factory unit to deliver more stable boost levels and improved response times, making it an essential component for drivers seeking reliable boost control in tuned applications.

• Direct-fit replacement for the original equipment boost control solenoid
• Designed for faster response times and improved boost stability
• Critical for maintaining precise targets in high-boost or tuned configurations
• Manufacturer Part Number: ASM-TAC-730

Fits 2004-2007 Subaru Impreza WRX STI and WRX STI Limited.

The PERRIN Pro Electronic Boost Control Solenoid (EBCS) is engineered to provide faster boost response and more stable control than the factory equipment. This upgrade allows for more precise wastegate management, which is critical for tuned engines where consistent boost pressure is required to maximize performance and safety.

Built to withstand high-heat engine bay environments, this solenoid replaces the stock unit to eliminate boost spiking and oscillation. It is an essential component for owners looking to refine their boost curve and improve overall drivability on the EJ257 platform.

• Direct replacement for the factory boost control solenoid
• Ensures faster response and more accurate boost curves
• Durable construction for reliable performance under high pressure
• Includes all necessary hardware for installation
• Manufacturer Part Number: ASM-TAC-729

Fits 2015-2020 Subaru WRX (Base, Limited, and Premium).

Improve your turbocharger response and stability with the PERRIN Pro Electronic Boost Control Solenoid. This high-performance EBCS is engineered to replace the factory unit, offering the precision and speed required for consistent boost management on the 2015-2020 Subaru WRX platform. By utilizing a high-quality solenoid mechanism, this component helps eliminate boost fluctuations and allows for more accurate tuning, ensuring your FA-series engine maintains peak performance throughout the RPM range.

• Manufacturer Part Number: ASM-TAC-727
• Fast Response: Optimized internal construction for rapid cycling and precise duty cycle control.
• Reliability: Engineered to withstand the thermal stress and vibration found in high-performance engine bays.
• Direct Integration: Designed for a clean installation, interfacing directly with the vehicle's boost control system.