The Wilwood Forged Superlite FSLI (Internal) series is a high-performance evolution of the industry-standard Superlite caliper, designed for short track, late model, road racing, and off-road competition. This FSLI model (120-11129) features a redesigned body with internal fluid ports, effectively eliminating external fluid crossover tubes and the risk of damage during track contact or debris strikes.

Equipped with a symmetrical piston bore and four bleed screw assemblies, this caliper offers versatile mounting configurations. It can be installed in leading or trailing positions on either the left or right side of the vehicle without modification. The forged aluminum construction ensures maximum stiffness and consistent pedal feel under high-heat racing conditions.

• Piston Diameter: 1.38in
• Disc Width Compatibility: 1.10in
• Internal Fluid Ports: Eliminates external crossover tubes for improved durability
• Symmetrical Bore Design: Allows for universal right, left, leading, or trailing mounting
• Material: High-strength forged aluminum
• Manufacturer Part Number: 120-11129

The Wilwood Forged Superlite Internal (FSLI) series represents the latest evolution in the benchmark Superlite family, widely utilized in short track, late model, modified, and road-racing competition. This redesigned model integrates internal fluid ports to eliminate external crossover tubes, removing the risk of damage or failure caused by track debris.

Engineered for versatility and performance, the FSLI features a symmetrical piston bore design and is equipped with four bleed screw assemblies. This configuration allows for universal mounting on either the left or right side of the vehicle in both leading and trailing positions. The forged aluminum body provides superior structural integrity and resistance to deflection under high-pressure braking conditions.

• Piston Size: 1.25 in
• Rotor Width: 0.81 in
• Caliper Type: 4-Piston
• Series: Forged Superlite Internal (FSLI)
• Internal Fluid Ports: Eliminates external transfer tubes
• Mounting: Universal leading/trailing and left/right orientation
• Manufacturer Part Number: 120-11126

The Wilwood Forged Superlite Internal (FSLI) caliper series is the latest evolution of the industry-standard Superlite family, engineered for the rigors of short track, late model, and road-race competition. This FSLI model eliminates the external fluid cross-over tubes found on traditional calipers, replacing them with internal fluid ports to prevent damage from track debris and mechanical interference.

Designed for maximum versatility, the symmetrical piston bore architecture includes four bleed screw assemblies. This allows the unit to be mounted in either a leading or trailing position on the left or right side of the vehicle, simplifying brake system configuration and spares management. The forged body provides high-clamping force with minimal deflection under extreme temperatures.

• Internal fluid transfer ports eliminate vulnerable external tubes
• Universal mounting: fits right or left, leading or trailing positions
• Four bleed screw assemblies for easy maintenance in any orientation
• Symmetrical piston bore design for even pad loading

• Manufacturer Part Number: 120-11125
• Piston Diameter: 1.12 in
• Compatible Disc Width: 0.81 in
• Series: Forged Superlite Internal (FSLI)

Fits select 1968-1996 GM passenger vehicles and trucks with 1.04-inch rotors.

The Wilwood D52 caliper is a high-performance direct bolt-on 2-piston replacement for the factory single-piston calipers found on many classic GM applications. Engineered for both street and track use, these calipers eliminate common OE failures like bore pitting and seal leaks while providing a significant reduction in unsprung weight.

Each D52 caliper is constructed with a forged billet aluminum body for maximum strength and finished in a durable red coating. The dual 2.00-inch stainless steel pistons and competition-style high-temperature seals ensure consistent braking performance and long-term reliability in demanding environments.

• Direct bolt-on replacement for factory GM D52 calipers
• Forged billet aluminum body for weight savings and rigidity
• Dual 2.00-inch stainless steel pistons for corrosion resistance
• Internal competition-style high-temperature seals
• Fits 1.04-inch (26.4mm) rotor thickness
• Finish: Red Powder Coat
• Manufacturer Part Number: 120-10937-RD

Fits select 1968-1996 GM passenger vehicles and trucks as a direct-fit performance upgrade. This Wilwood D52 caliper (MPN 120-10936-BK) is a direct bolt-on two-piston replacement for the factory original single-piston calipers.

Engineered to resolve common issues with OE cast-iron units, these calipers feature forged billet aluminum bodies that significantly reduce unsprung weight while increasing structural rigidity. By utilizing dual 2.00-inch stainless steel pistons and competition-style high-temperature seals, Wilwood eliminates the rust, bore pitting, and seal failures that often plague stock iron calipers. These units provide low-maintenance performance and high-temperature reliability suitable for both spirited street driving and track applications.

• Piston Size: Dual 2.00-inch (50.8mm) stainless steel pistons
• Disc Width: Designed for 1.28-inch (32.5mm) thick rotors
• Construction: Forged billet aluminum for maximum strength and weight savings
• Finish: Durable black powder coat for corrosion resistance
• Installation: Direct bolt-on to factory mounting points

The Wilwood DynaPro Single Lightweight (DPS-LW) billet caliper is a high-strength performance upgrade designed to replace the legacy Dynalite Single (DLS) series. Precision-machined from billet aluminum, the DPS-LW offers a significant strength increase while maintaining a compact footprint. Its lightweight profile is specifically engineered for applications with limited space, such as Sprint Car front ends, ensuring proper clearance without sacrificing clamping force.

• Precision-machined billet aluminum body for maximum rigidity
• 1.75-inch pistons for reliable braking performance
• 3.25-inch lug mounting centers
• Designed for 0.38-inch thick rotors
• Direct upgrade/replacement for Wilwood DLS series calipers
• Manufacturer Part Number: 120-10188

Fits select 2000-2005 Ford Excursion and 2000-2004 Ford F-250/F-350 Super Duty models.

Power Stop S4752 Rear Powder Coated Brake Calipers offer a direct-fit upgrade for enthusiasts looking to improve both the performance and aesthetics of their heavy-duty Ford truck or SUV. These calipers are finished in a durable, high-temperature red electrostatic powder coating that provides superior resistance to rust and corrosion, extending the service life of the components while maintaining a clean look behind the wheels. Each caliper is 100% pressure tested and inspected to ensure consistent piston operation and leak-free performance.

Assembled with a focus on long-term reliability, these calipers feature high-temperature EPDM rubber dust boots and premium lubricants to ensure smooth operation in demanding conditions. This pair comes fully equipped with the necessary mounting brackets and hardware for a straightforward, bolt-on installation using factory mounting points.

• Manufacturer Part Number: S4752
• High-temperature red electrostatic powder coating for rust and corrosion resistance
• Includes new brackets, seals, caliper slide pins, and bleeder screws
• High-temperature EPDM rubber dust boots for durability
• Stainless steel brake pad attachment hardware included
• 100% pressure tested for reliable braking performance
• Direct bolt-on replacement for OE calipers

Fits 2012-2013 Ford F-250 Super Duty and 2012 Ford F-350 Super Duty. This complete front-axle upgrade is engineered specifically for vehicles that face the high-demand stress of towing, hauling, and off-road use.

The Power Stop Z36 Truck & Tow Brake Kit replaces worn factory components with a severe-duty system designed to manage the extreme heat generated during heavy-duty applications. At the core of the kit are the Z36 carbon-fiber ceramic brake pads, which provide significantly higher friction than standard ceramic pads to handle increased gross vehicle weights. These pads are paired with drilled and slotted rotors that maximize heat dissipation and gas venting, ensuring consistent stopping power during long mountain descents or stop-and-go towing.

This kit includes remanufactured red powder-coated calipers that offer superior corrosion resistance and a custom look. Every component is designed for a direct bolt-on installation to factory mounting points with no modifications required.

• Manufacturer Part Number: KC6545-36
• Brake Pads: Carbon-fiber reinforced ceramic compound for 30% less dust than OE pads.
• Rotors: Drilled and slotted G3000 casting with silver zinc plating to prevent rust and corrosion.
• Calipers: Performance red powder coating for high-temperature durability and longevity.
• Hardware: Includes high-temp stainless steel shims, installation hardware, and ceramic lubricant.
• Validation: Low-dust performance verified through independent 3rd party on-vehicle testing.

Fits select 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia (Base, Limited, SR5).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers is engineered for vehicles that face the added stress of towing, hauling, and heavy-duty 4x4 use. This complete front-end solution replaces worn factory components with a severe-duty brake system designed to manage heat and provide consistent stopping power on long mountain descents or off-road trails.

This kit features proprietary Z36 Carbon-Fiber Ceramic pads that offer a higher coefficient of friction than standard ceramic pads, while maintaining low-dust performance—validated to produce 30% less dust than OE in 3rd party testing. The included drilled and slotted rotors maximize heat dissipation and keep brake temperatures low. Each kit comes with remanufactured calipers finished in a high-temperature red powder coating for superior corrosion resistance and a custom look behind the wheels.

• Carbon-Fiber Ceramic Z36 brake pads for increased stopping power under heavy loads
• Drilled and slotted performance rotors for maximum cooling and debris evacuation
• Zinc-plated rotors provide long-lasting protection against rust and corrosion
• Red high-temperature powder-coated calipers resist fading and environmental damage
• Stainless-steel shims and hardware for high-heat durability
• Complete bolt-on installation requires no vehicle modifications
• Includes high-temperature ceramic lubricant and stainless-steel installation hardware
• Manufacturer Part Number: KC2324-36

Fits 2005-2010 Ford F-250 and F-350 Super Duty trucks. This front-axle upgrade is engineered specifically for vehicles that handle heavy towing, hauling, and off-road use.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit provides the severe-duty stopping power required for lifted trucks and heavy trailers. The kit features proprietary Z36 Carbon-Fiber Ceramic brake pads, which offer increased braking torque and fade resistance over standard ceramic compounds. Paired with precision-machined drilled and slotted rotors, this system maximizes heat dissipation to prevent warping during long mountain descents. The included calipers are treated with a high-temperature red powder coating to resist corrosion and maintain a clean appearance behind the wheels.

• Proprietary Carbon-Fiber Ceramic Z36 brake pads for heavy-load stopping power
• Drilled and slotted performance rotors for maximum cooling and heat dissipation
• Zinc-plated rotors provide a durable barrier against rust and corrosion
• Red powder-coated calipers protect against road debris and environmental wear
• Low-dust braking formula validated by 3rd party testing to produce 30% less dust than OE
• Premium stainless-steel hardware and high-temperature ceramic lubricant included
• Direct bolt-on installation to factory mounting points with no modifications required
• Manufacturer Part Number: KC1781-36

Fits select 2016-2022 Toyota Sequoia and 2016-2021 Toyota Tundra.

Power Stop S7342 powder-coated brake calipers are engineered as a direct bolt-on replacement for factory hardware, providing enthusiast-grade performance and a refreshed appearance. Each caliper is treated with a durable, electrostatic high-temperature red powder coating that resists rust and corrosion while remaining easy to clean. To ensure maximum reliability and out-of-the-box performance, every unit is 100% pressure tested and inspected for proper piston operation.

These calipers are expertly assembled using high-temperature EPDM rubber dust boots and premium lubricants for smooth, consistent operation even under extreme towing or hauling conditions. This pair comes fully equipped with the necessary hardware to complete a front-end brake service without the need for modifications.

• Direct bolt-on replacement for original equipment calipers.
• Durable electrostatic high-temperature red powder coating for superior corrosion resistance.
• 100% pressure tested and inspected to verify piston seal integrity and performance.
• High-temperature EPDM rubber dust boots for extended service life.
• Includes new seals, bleeder screws, mounting brackets, and stainless steel pad attachment hardware.
• Manufacturer Part Number: S7342

Fits 2010-2015 Lexus GX460 and Toyota 4Runner (Base, Luxury, Premium, Limited, SR5, Trail, and TRD Pro).

Power Stop S6278 Red Powder Coated Brake Calipers provide a high-performance look and enhanced durability for your SUV's braking system. These front calipers are finished in a specialized electrostatic high-temperature red powder coating that resists rust and corrosion, ensuring they stay looking new behind your wheels. Designed as a direct bolt-on replacement for the original stock calipers, they require no modifications for installation.

Each caliper is 100% pressure tested and inspected to verify piston operation and seal integrity, guaranteeing reliable performance. This set is expertly assembled with premium components, including high-temperature EPDM rubber dust boots and high-quality lubricants to ensure smooth operation in the harshest environments. This pair of calipers replaces worn OE units while providing a significant aesthetic upgrade.

• Direct bolt-on replacement for factory front calipers (Sold as a pair)
• Durable high-temperature red powder coating resists corrosion and rust
• 100% pressure tested to ensure consistent, leak-free braking performance
• High-temperature EPDM rubber dust boots for extended service life
• Includes new seals, pad retainer pins, clips, bleeder screws, and stainless-steel hardware
• Manufacturer Part Number: S6278

Fits select 2008-2024 Nissan 350Z/370Z and Infiniti G37, Q50, Q60, Q70, Q70L, QX70, and M-Series models.

Upgrade your braking system's aesthetics and reliability with Power Stop Red Powder Coated Front Brake Calipers. These calipers are engineered as a direct-fit replacement for factory components, providing a refreshed look and consistent performance. Each unit undergoes rigorous 100% pressure testing to verify piston operation and ensure leak-free performance under pressure.

Finished in a durable, electrostatic high-temperature red powder coating, these calipers are designed to resist rust and corrosion while standing up to the thermal demands of spirited driving. The easy-to-clean finish maintains its appearance behind your wheels, while the inclusion of premium EPDM rubber seals ensures longevity in harsh conditions.

• Direct bolt-on replacement for factory front calipers
• High-temperature electrostatic red powder coating for superior corrosion resistance
• 100% pressure tested and inspected to verify piston seals and brake performance
• High-temp EPDM rubber dust boots and premium lubricants for smooth operation
• Includes new seals, pad retainer pins, clips, bleeder screws, and stainless-steel hardware
• Manufacturer Part Number: S6232

Note: This pair includes the front left and right calipers only; mounting brackets are not included.

Fits select 2012-2022 Ford F-250 and F-350 Super Duty models (XL, XLT, Lariat, King Ranch, Platinum, and Limited).

Power Stop S5486 powder-coated brake calipers are engineered as a direct-fit replacement for enthusiasts looking to improve both the performance and aesthetics of their heavy-duty truck. These calipers bolt directly to the factory mounting points and arrive as a complete pair for the front axle. Each caliper undergoes a rigorous 100% pressure test to ensure reliable piston operation and leak-free performance under heavy braking loads.

The durable electrostatic high-temperature red powder coating provides a distinctive look behind your wheels while offering superior resistance to rust and corrosion, significantly extending service life compared to bare cast-iron components. These units come expertly assembled with premium lubricants and high-temperature EPDM rubber dust boots for smooth operation in demanding conditions.

• Manufacturer Part Number: S5486
• Finish: High-temperature red electrostatic powder coat
• Direct bolt-on installation with no modifications required
• High-temperature EPDM rubber dust boots for long-term durability
• 100% pressure tested to verify piston seals and operation
• Includes new mounting brackets, seals, caliper slide pins/bolts, dust boots, and bleeder screws
• Includes stainless-steel brake pad attachment hardware

Fits select 2013-2022 Ford F-250 and F-350 Super Duty models.

Power Stop S5472 Performance Brake Calipers are engineered as a direct-fit upgrade for enthusiasts looking to improve both the reliability and appearance of their heavy-duty truck. These rear calipers are finished with a durable, electrostatic high-temperature red powder coating that provides superior resistance to rust and corrosion, ensuring they stay looking new even in harsh environments.

Every caliper is 100% pressure tested and inspected to verify proper piston operation and seal integrity. Assembled using premium EPDM rubber dust boots for heat resistance and high-quality lubricants, these units ensure smooth operation under heavy loads. This set comes fully equipped with mounting brackets and stainless-steel hardware for a straightforward, bolt-on installation with no modifications required.

• Direct-bolt-on replacement for original factory rear calipers
• High-temperature red powder coating resists corrosion and simplifies cleaning
• 100% pressure tested to guarantee reliable, leak-free performance
• Equipped with high-temp EPDM rubber seals and boots for long-term durability
• Includes new mounting brackets, caliper slide pins, bleeder screws, and stainless-steel hardware
• Manufacturer Part Number: S5472

Fits 2012-2020 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, and Raptor.

Power Stop S5404 red powder-coated brake calipers are engineered as a direct bolt-on upgrade for enthusiasts looking to improve both the performance and aesthetics of their truck. These calipers are finished with a durable electrostatic high-temperature powder coating that resists rust and corrosion, ensuring a long-lasting finish even in harsh driving conditions. Each unit undergoes 100% pressure testing and inspection to verify piston operation and seal integrity before leaving the facility.

These calipers come fully assembled with everything required for a clean installation. By replacing your worn factory units with this premium pair, you benefit from upgraded materials such as high-temperature EPDM rubber dust boots and premium lubricants that ensure smooth operation and longevity.

• Manufacturer Part Number: S5404
• Finish: Electrostatic high-temperature red powder coat
• Piston Material: Verified for consistent pressure and operation
• Hardware Included: Mounting brackets, new seals, caliper slide pins, dust boots, bleeder screws, and stainless-steel pad attachment hardware
• Installation: Direct bolt-on to factory mounting points; no modifications required
• Durability: High-temp EPDM rubber boots for superior heat resistance

Fits 2012-2018 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, and Raptor (Rear).

Upgrade your Ford F-150's braking performance and aesthetics with Power Stop S5396 powder-coated calipers. These rear calipers are a direct bolt-on replacement for factory hardware, engineered to restore braking efficiency while providing superior resistance to the elements. Each unit undergoes a 100% pressure test to verify piston seal integrity and overall operation before leaving the facility.

These calipers feature a durable, electrostatic high-temperature red powder coating that resists rust and corrosion, extending the service life of the component compared to standard unfinished castings. Assembled with premium EPDM rubber seals and boots, these calipers are built to withstand the thermal cycles of heavy-duty use and daily driving alike.

• Manufacturer Part Number: S5396
• Finish: High-temperature red electrostatic powder coat for corrosion resistance
• Construction: 100% pressure tested to ensure reliable piston operation
• Components: Includes high-temperature EPDM rubber dust boots and premium lubricants
• Hardware: Includes mounting brackets and stainless-steel pad attachment hardware
• Installation: Direct bolt-on fitment with no modifications required

Fits select 2011-2019 Chevrolet Silverado 2500 HD/3500 HD, Suburban 3500 HD, and GMC Sierra 2500 HD/3500 HD models.

Power Stop S5306 Rear Brake Calipers are engineered to provide reliable performance and a custom appearance for heavy-duty trucks. These calipers undergo a rigorous remanufacturing process and are finished with a durable, electrostatic high-temperature red powder coating. This easy-to-clean finish provides essential resistance against rust and corrosion, extending the service life of the components while looking great behind your wheels.

To ensure a leak-free installation and dependable stopping power, every caliper is 100% pressure tested and inspected for proper piston operation. These units come fully assembled with high-temperature EPDM rubber dust boots, premium seals, and stainless steel pad attachment hardware. Designed as a direct bolt-on replacement, they mount to the factory points without modification.

• Electrostatic high-temperature red powder coating for rust and corrosion resistance
• 100% pressure tested to verify piston operation and seal integrity
• New EPDM rubber dust boots and premium seals for high-heat durability
• Includes mounting brackets and stainless steel pad attachment hardware
• Direct bolt-on design replaces factory OE calipers
• Expertly lubricated for smooth caliper slide operation
• Manufacturer Part Number: S5306

Fits select 2010-2021 Ford Expedition, F-150, and Lincoln Navigator models. These Power Stop S5236 Powder Coated Brake Calipers are engineered for enthusiasts seeking a direct-fit replacement for worn original equipment. These calipers bolt directly to factory mounting points and provide a custom aesthetic without the need for modifications.

Every caliper undergoes a rigorous 100% pressure test to verify piston operation and ensure leak-free performance. The units are finished in a durable, electrostatic high-temperature red powder coating that provides superior resistance to rust and corrosion in harsh environments. To ensure long-term reliability and smooth operation, these calipers are expertly assembled using premium lubricants and high-temperature EPDM rubber dust boots.

• Electrostatic high-temp red powder coating resists corrosion and simplifies cleaning
• 100% pressure tested and inspected for reliable piston operation
• High-temperature EPDM rubber seals and dust boots for maximum durability
• Includes mounting brackets, new seals, caliper slide pins, bleeder screws, and dust boots
• Stainless steel brake pad attachment hardware included
• Direct bolt-on fitment with no vehicle modifications required
• Manufacturer Part Number: S5236

Fits select 2009-2018 Dodge and Ram 1500, 2500, and 3500 trucks (see fitment table for specific submodels). Power Stop S5174 brake calipers are engineered as a direct-fit performance upgrade for enthusiasts seeking both reliability and a custom appearance.

These rear calipers are treated with a durable, electrostatic high-temperature red powder coating that resists rust and corrosion while maintaining a clean look behind your wheels. Every caliper is 100% pressure tested to verify piston operation and seal integrity, ensuring consistent braking performance under heavy loads or daily driving. This pair comes fully assembled and is designed to bolt directly to factory mounting points without modification.

• Manufacturer Part Number: S5174
• Includes high-temperature EPDM rubber dust boots for long-lasting seal protection
• Premium lubricant applied to caliper slide pins for smooth operation
• Durable electrostatic red powder coating resists heat and environmental corrosion
• 100% pressure tested to ensure leak-free performance and reliable piston retraction
• Kit includes: Left and right rear calipers, mounting brackets, new seals, caliper slide pins/bolts, dust boots, bleeder screws, and stainless steel pad attachment hardware

Fits select 2009-2018 Dodge and Ram 1500, 2500, and 3500 trucks. Power Stop performance brake calipers (MPN: S5172) are engineered as a bolt-on replacement for enthusiasts seeking improved reliability and aesthetics. These front calipers are treated with an electrostatic high-temperature red powder coating that resists rust and corrosion while maintaining a clean look behind your wheels.

Every caliper is 100% pressure tested to verify piston operation and ensure leak-free performance. Assembled with premium high-temperature EPDM rubber dust boots and seals, these units are built to withstand the thermal stresses of heavy-duty towing and daily driving. This kit includes mounting brackets and all necessary stainless steel hardware for a complete installation without modifications.

• Electrostatic high-temperature red powder coat for superior corrosion resistance
• 100% pressure tested to guarantee reliable piston operation and seal integrity
• New high-temperature EPDM rubber boots and premium seals for longevity
• Includes mounting brackets and stainless steel pad attachment hardware
• Direct bolt-on fitment; no vehicle modifications required
• Manufacturer Part Number: S5172

Fits select 2005-2020 Chrysler 300, Dodge Challenger, Charger, Magnum, Jeep Grand Cherokee, and Mercedes-Benz CL/S/SL-Class.

Power Stop S5086 Powder Coated Brake Calipers are engineered for performance enthusiasts looking for a reliable, bolt-on brake upgrade. These calipers are finished with a durable, electrostatic high-temperature red powder coating that provides superior resistance to rust and corrosion while making them easy to clean behind your wheels. To ensure peak performance, every caliper is 100% pressure tested and inspected to verify piston operation and seal integrity.

These units are expertly assembled using premium lubricants and high-temperature EPDM rubber dust boots to withstand the harshest driving conditions. Designed as a direct replacement for your factory calipers, they include all necessary hardware for a smooth installation without the need for vehicle modifications.

• Durable high-temperature red powder coating resists corrosion and heat soak.
• 100% pressure tested to guarantee reliable, leak-free braking performance.
• High-temperature EPDM rubber dust boots for long-lasting durability.
• Includes new seals, bleeder screws, and stainless steel pad attachment hardware.
• Direct bolt-on fitment replaces stock calipers (mounting brackets not included).
• Sold as a pair (front driver and passenger side).
• Manufacturer Part Number: S5086

Fits select 2007-2021 Chrysler Aspen, Dodge Durango, Dodge Dakota, Ram 1500, and 1500 Classic models.

Refresh your vehicle's braking performance and aesthetic with Power Stop S5054 Front Red Powder Coated Brake Calipers. These calipers are engineered as a direct bolt-on replacement for factory units, mounting perfectly to original equipment positions without modification. Each caliper undergoes a 100% pressure test and thorough inspection to verify piston operation and seal integrity, ensuring leak-free performance and reliable stopping power.

• Durable Finish: Features an electrostatic high-temperature red powder coating that resists rust and corrosion while providing an easy-to-clean surface.
• Premium Sealing: Assembled with high-temperature EPDM rubber dust boots and premium lubricants for smooth, consistent caliper operation in extreme temperatures.
• Complete Installation Kit: Includes new mounting brackets, stainless steel pad attachment hardware, bleeder screws, and caliper guide pins for a comprehensive service.
• Direct Fitment: Designed to replace worn OE bushings and calipers using factory mounting points for a hassle-free install.

Whether you are replacing seized factory components or looking for a performance-oriented look behind your wheels, the Power Stop S5054 set delivers a high-quality, expertly assembled solution.

Fits select 2007-2018 Dodge Nitro, Jeep Liberty, and Jeep Wrangler / Wrangler JK.

Power Stop Performance Rear Brake Calipers (S5046) are engineered as a direct-fit upgrade for enthusiasts seeking to enhance both vehicle aesthetics and braking reliability. These calipers are finished with a durable, high-temperature electrostatic red powder coating that provides superior resistance to rust and corrosion while being easy to maintain. Each unit undergoes 100% pressure testing to verify piston operation and ensure consistent performance in demanding conditions.

These calipers are expertly assembled with all-new components, including high-temperature EPDM rubber dust boots for heat resistance and premium lubricants for smooth slide-pin operation. This kit comes ready for installation, designed to bolt directly to the factory mounting points without modification.

• Direct bolt-on replacement for original stock rear calipers
• Durable high-temperature red powder coated finish for longevity
• 100% pressure tested and inspected for leak-free performance
• New EPDM rubber dust boots and premium lubricants for smooth operation
• Includes stainless steel brake pad attachment hardware and new bleeder screws
• Comes complete with mounting brackets and new caliper slide pins
• Manufacturer Part Number: S5046

Fits select 2007-2020 Cadillac Escalade/ESV/EXT, Chevrolet Silverado 1500, Tahoe, Suburban, Avalanche, and GMC Sierra 1500, Yukon/XL models.

Power Stop S5030 Powder Coated Brake Calipers are engineered as a direct-fit performance upgrade for enthusiasts looking to improve both the durability and aesthetics of their braking system. These calipers are treated with a high-temperature electrostatic red powder coating that resists rust and corrosion while maintaining a clean appearance behind your wheels. Every unit undergoes 100% pressure testing and inspection to ensure reliable piston operation and leak-free performance under demand.

These calipers arrive as a pair and include everything necessary for a complete installation, including mounting brackets, new seals, and premium lubricant. The use of high-temperature EPDM rubber dust boots ensures smooth operation and long-term durability even in harsh driving conditions.

• Electrostatic high-temperature red powder coating for superior corrosion resistance
• 100% pressure tested and inspected to guarantee reliable braking performance
• Precision-assembled with new seals, caliper slide pins, and bleeder screws
• High-temperature EPDM rubber dust boots for extended service life
• Includes stainless steel brake pad attachment hardware and mounting brackets
• Direct bolt-on replacement for factory components; no modifications required
• Manufacturer Part Number: S5030

Fits select 2005-2013 Ford F-250 and 2005-2012 Ford F-350 Super Duty trucks.

Power Stop S5022 Performance Brake Calipers are engineered as a direct-fit bolt-on replacement for factory front calipers. These calipers are ideal for enthusiasts looking to improve both the aesthetics and reliability of their braking system. Each unit undergoes a rigorous 100% pressure test to verify piston operation and seal integrity, ensuring consistent performance under heavy loads.

The calipers feature a durable, electrostatic high-temperature red powder coating that resists rust and corrosion, keeping them looking new even in harsh environments. To ensure long-term durability, Power Stop utilizes premium EPDM rubber dust boots and high-temperature lubricants for smooth, reliable operation.

• Direct bolt-on installation with no vehicle modifications required
• High-temperature red powder coat finish for superior corrosion resistance
• Includes new mounting brackets, seals, and caliper slide pins
• High-temp EPDM rubber dust boots for extended service life
• Stainless steel brake pad attachment hardware and bleeder screws included
• 100% pressure tested to guarantee leak-free performance
• MPN: S5022

Fits select 2005-2021 Chrysler 300, Dodge Challenger, Charger, and Magnum.

Power Stop S4992 performance powder-coated brake calipers provide a direct-fit upgrade for enthusiasts looking to improve both the aesthetics and reliability of their braking system. These rear calipers are finished with a durable, electrostatic high-temperature red powder coating that resists rust and corrosion, ensuring long-lasting performance and a clean look behind your wheels.

• Direct-Fit Replacement: Bolts directly to factory mounting points; these calipers include the mounting brackets for a complete installation.
• Performance Tested: Every caliper is 100% pressure tested and inspected to verify piston operation and guarantee reliable hydraulic performance.
• Enhanced Durability: Features high-temperature EPDM rubber dust boots and premium lubricants to ensure smooth operation even under heavy braking conditions.
• Complete Component Kit: Assembled with new seals, caliper slide pins/bolts, dust boots, bleeder screws, and stainless-steel pad attachment hardware.
• Manufacturer Part Number: S4992

Fits select 2003-2008 Dodge Ram 1500, 2500, and 3500 trucks.

Power Stop S4894 powder-coated brake calipers are engineered as a direct bolt-on upgrade for enthusiasts seeking both performance and aesthetic appeal. These rear calipers are finished with a durable electrostatic high-temperature red powder coating that resists rust and corrosion, extending the service life of the components while looking great behind your wheels. To ensure reliable, leak-free operation, every caliper is 100% pressure tested and inspected for proper piston movement.

These units come expertly assembled with premium lubricants and high-temperature EPDM rubber dust boots for smooth operation in harsh environments. This complete pair includes everything needed for a seamless installation, including mounting brackets and stainless-steel hardware.

• Part Number: S4894
• Finish: High-temperature red powder coating
• 100% pressure tested to verify piston operation
• New seals, dust boots, and bleeder screws
• Includes stainless-steel brake pad attachment hardware
• Includes new caliper slide pins and mounting brackets
• High-temperature EPDM rubber components for durability
• Direct bolt-on fitment with no modifications required

Fits select 2003-2008 Dodge Ram 1500, 2500, and 3500 heavy-duty trucks. These Power Stop performance brake calipers (S4890) are engineered as a direct-fit upgrade for enthusiasts seeking better corrosion resistance and a custom look. Each caliper undergoes a 100% pressure test to verify piston operation and seal integrity, ensuring reliable stopping power right out of the box.

These calipers feature a durable, electrostatic high-temperature red powder coating that resists rust and makes cleaning road grime or brake dust simple. Assembled with premium EPDM rubber dust boots for heat resistance and lubricated with high-grade silicone lubricant, these units are built to withstand the thermal cycles of heavy-duty towing and daily driving. This pair comes fully assembled with the necessary mounting brackets and hardware for a straightforward, bolt-on installation.

• Direct-fit replacement for factory front calipers
• High-temperature red powder coating for superior corrosion resistance
• 100% pressure tested to ensure leak-free performance
• New EPDM rubber seals and dust boots for long-term durability
• Includes stainless steel brake pad attachment hardware and mounting brackets
• Pre-lubricated with premium brake lubricant for smooth operation
• MPN: S4890

Fits select 2002-2021 Chrysler Aspen, Dodge Durango, Ram 1500, and Ram 1500 Classic.

Power Stop Performance Brake Calipers (S4836) are engineered for the enthusiast looking for both a custom appearance and reliable stopping power. These rear calipers feature a durable, electrostatic high-temperature red powder coating that provides a high-end look while resisting the rust and corrosion that typically affects cast-iron factory parts. Designed as a direct bolt-on replacement, they mount to your vehicle's factory locations with no modifications required.

Each unit is 100% pressure tested and inspected to verify piston operation and ensure leak-free performance. These calipers are expertly assembled with premium components, including high-temperature EPDM rubber dust boots and seals, new bleeder screws, and caliper slide pins. The set comes complete with new mounting brackets and stainless steel pad attachment hardware, making it a comprehensive solution for refreshing your rear braking system.

• Manufacturer Part Number: S4836
• Placement: Rear (Left and Right Pair)
• Finish: Electrostatic high-temperature red powder coat
• Construction: 100% pressure tested and inspected
• Seals: High-temperature EPDM rubber for heat resistance and longevity
• Included Hardware: Mounting brackets, stainless steel clips, pins, and boots
• Installation: Direct bolt-on to OE mounting points