Fits select 2009-2024 Chevrolet Express, Silverado, and Suburban; GMC Savana and Sierra; and Nissan NV and TITAN XD models.

Engineered for vehicles operating in demanding environments, the DFC Heavy Duty Semi-Metallic Brake Pads and Hardware Kit (1214-1565-01) deliver reliable, predictable stopping power. These pads are formulated to maintain a stable friction level regardless of operating temperature, axle load, or vehicle speed, making them an ideal choice for towing, hauling, and heavy-duty fleet applications.

• High-Heat Resilience: Specially engineered to withstand extremely high operating temperature ranges without compromising performance.
• Semi-Metallic Composition: Provides a strong, consistent bite under heavy traffic, steep gradients, and high-speed braking.
• Rotor-Friendly Formulation: Designed to extend the life of your brake rotors while maintaining superior friction levels.
• Complete Hardware Kit: Includes necessary hardware for a proper, secure installation to minimize noise and vibration.
• Quiet & Clean: Optimized for low noise and low dust production compared to traditional heavy-duty friction materials.
• Versatile Application: Suitable for towing, off-roading, and extreme braking environments.

Fits select 2009-2018 Dodge and Ram 2500 and 3500 trucks.

The DFC Heavy Duty Front Brake Pad and Hardware Kit (MPN: 1214-1399-01) is engineered for vehicles operating in extreme braking environments, including heavy towing, off-road use, and navigating steep gradients. These semi-metallic pads deliver consistent, predictable friction levels regardless of operating temperature or axle load, ensuring reliable stopping power when your truck is fully loaded.

Designed to withstand extremely high operating temperature ranges, the rotor-friendly compound minimizes surface wear while maintaining low noise and low dust performance. This kit provides a complete solution for front-axle maintenance, including all necessary hardware for a proper installation.

• Semi-metallic friction formula for superior high-heat stability
• Engineered specifically for towing, high speeds, and heavy traffic conditions
• Consistent performance across varying axle loads and temperatures
• Rotor-friendly design helps extend the life of braking components
• Includes required installation hardware
• Manufacturer Part Number: 1214-1399-01

Fits select 2010-2020 Lexus RX350, RX450h and Toyota Highlander, Mirai, Prius V, and Sienna.

Engineered for high-demand environments, the DFC Heavy Duty Series rear brake pad kit is designed for vehicles subjected to extreme braking conditions. Whether you are towing, navigating steep gradients, or driving in heavy stop-and-go traffic, these semi-metallic pads maintain a strong, predictable friction level across a wide operating temperature range. This kit includes the necessary hardware for a complete installation, ensuring your braking system operates with minimal noise and dust without being aggressive on your rotors.

• Manufacturer Part Number: 1214-1391-01
• Material: Semi-Metallic formula for high-heat stability
• Configuration: Rear Brake Pad Set with Hardware
• Performance: Consistent friction levels regardless of speed, temperature, or axle load
• Durability: Designed for heavy traffic, towing, off-roading, and high-speed applications
• Maintenance: Low noise and low dust characteristics for cleaner wheels and quieter stops
• Rotor Compatibility: Rotor-friendly formulation to extend service life

Fits 2004-2024 American Coach American Allegiance motorhomes.

Specifically engineered for the extreme operating requirements of heavy coaches, these DFC Heavy Duty Semi-Metallic Front Brake Pads provide consistent stopping power across a wide thermal range. They are designed to manage the high kinetic energy and heat dissipation needs of heavy traffic, steep mountain gradients, and towing applications.

• Predictable Performance: Maintains stable friction levels regardless of operating temperature, vehicle speed, or axle load.
• Thermal Resilience: Formulated to withstand extremely high temperatures to prevent brake fade during prolonged use.
• Component Compatibility: Rotor-friendly semi-metallic material helps maintain surface integrity for extended service life.
• Refined Friction: Low-noise and low-dust characteristics compared to standard heavy-duty compounds.
• Manufacturer Part Number: 1214-1369-00

Fits select 2005-2020 Cadillac, Chevrolet, and GMC vehicles, including Silverado 1500, Sierra 1500, Tahoe, Yukon, Suburban, and Escalade.

Designed for demanding service conditions, the DFC Heavy Duty Brake Pad and Hardware Kit (MPN: 1214-1363-01) is engineered for vehicles frequently used for towing, hauling, or operating in high-traffic and steep-gradient environments. These semi-metallic pads provide a stable, predictable friction level across a wide operating temperature range, ensuring consistent stopping power whether the vehicle is empty or fully loaded.

• Compound: High-performance semi-metallic formulation for superior thermal stability and fade resistance.
• Application: Optimized for heavy-duty use including towing, off-roading, and commercial service.
• Hardware Included: Comes with application-specific hardware to ensure a complete and quiet installation.
• Rotor Friendly: Formulated to minimize rotor wear while maintaining high braking torque.
• Performance: Low-noise and low-dust operation compared to traditional heavy-duty metallic pads.
• Direct Fit: Replaces worn OE pads with a precision-engineered alternative that meets or exceeds factory tolerances.

Fits select 2008-2010 Dodge Ram 4500 models.

The DFC Heavy Duty Semi-Metallic Brake Pads and Hardware Kit (1214-1335-01) is engineered for commercial-grade performance in the most demanding environments. These pads deliver a predictable, strong friction level regardless of axle load, speed, or temperature, making them an ideal solution for heavy-duty towing, steep gradients, and high-traffic conditions.

• Semi-metallic friction material designed for high heat dissipation.
• Maintains consistent braking performance under extreme operating temperatures.
• Rotor-friendly formulation reduces unnecessary component wear.
• Low-noise and low-dust characteristics compared to standard heavy-duty pads.
• Includes comprehensive replacement hardware for a complete installation.
• Manufacturer Part Number: 1214-1335-01

Fits 2008-2025 Ford E-450 Super Duty.

Engineered for vehicles operating under constant stress, the DFC Heavy Duty Brake Pads and Hardware Kit provides the consistent stopping power required for commercial use, towing, and fleet applications. This semi-metallic compound is specifically formulated to withstand the extremely high operating temperatures generated by heavy traffic, steep gradients, and high speed braking without sacrificing friction levels or pedal feel.

• Designed for extreme braking environments, including towing and off-roading
• Delivers a predictable friction level regardless of temperature, speed, or axle load
• Semi-metallic material provides durability while remaining rotor-friendly
• Engineered for low noise and low dust operation in heavy-duty cycles
• Includes complete rear axle hardware for a comprehensive installation
• Manufacturer Part Number: 1214-1330-01

Fits 2008-2025 Ford E-150, E-250, and E-350 Super Duty models.

The DFC Heavy Duty series is specifically engineered for vehicles operating in demanding environments such as towing, steep gradients, and high-traffic conditions. These semi-metallic brake pads provide a stable and predictable friction level across a wide range of temperatures and axle loads, ensuring reliable stopping power when the vehicle is under stress.

Constructed to withstand extremely high operating temperatures, these pads are designed to be rotor-friendly while maintaining low noise and low dust output. This kit includes the necessary premium hardware to ensure a complete and professional installation, restoring your vehicle's braking performance and safety.

• Position: Rear
• Material: Semi-Metallic formulation for thermal stability
• Designed for heavy-load applications, towing, and off-road use
• Includes complete installation hardware kit
• Low noise and low dust characteristics
• Manufacturer Part Number: 1214-1329-01

Fits select 2008-2025 Ford E-150, E-250, and E-350 Super Duty.

Engineered for extreme braking environments, the DFC Heavy Duty Semi-Metallic Brake Pads and Hardware Kit (1214-1328-01) delivers reliable stopping power for high-demand applications. These pads are specifically formulated to maintain a strong, predictable friction level regardless of operating temperature, axle load, or vehicle speed—making them an ideal choice for towing, heavy traffic, and steep gradients.

The semi-metallic compound is designed to be rotor-friendly while offering the high thermal stability required to prevent brake fade during prolonged use. This complete front axle kit includes necessary installation hardware for a direct-fit replacement of worn OE components.

• Semi-metallic friction material for superior heat dissipation and resistance
• Optimized for heavy-duty commercial use, towing, and off-roading
• Consistent friction coefficient across wide operating temperature ranges
• Low noise and low dust characteristics for improved driver comfort
• Includes premium hardware for a complete front brake service
• Manufacturer Part Number: 1214-1328-01

Fits select 2007-2020 Cadillac Escalade/ESV/EXT, Chevrolet Silverado/Suburban/Tahoe/Avalanche, and GMC Sierra/Yukon models. This DFC Heavy Duty Rear Brake Pad and Hardware Kit is specifically engineered for high-demand applications where standard pads fade. Featuring a specialized semi-metallic compound, these pads maintain a stable friction coefficient across a broad temperature range, making them an ideal choice for towing, hauling, or navigating steep gradients.

Designed to handle the increased kinetic energy of full-size SUVs and trucks, the DFC 1214-1194-12 kit includes the necessary premium hardware to ensure a complete, professional installation. The semi-metallic material offers superior thermal stability and durability compared to ceramic alternatives in heavy-duty environments while remaining rotor-friendly.

• High-Heat Performance: Formulated to withstand extreme operating temperatures without compromising stopping power.
• Heavy-Duty Reliability: Optimized for vehicles used in towing, off-roading, and heavy traffic conditions.
• Complete Installation: Includes application-specific hardware to restore proper caliper movement and reduce noise.
• Quiet Operation: Engineered for low noise and low dust production despite its heavy-duty rating.
• MPN: 1214-1194-12
• Position: Rear
• Material: Semi-Metallic

Fits select 2005-2024 Chrysler Aspen, Dodge Dakota, Dodge Durango, Dodge Ram 1500, Jeep Wrangler, Mitsubishi Raider, Ram 1500, and Ram 1500 Classic.

The DFC Heavy Duty Brake Pad and Hardware Kit is engineered for vehicles operating in demanding environments, such as towing, hauling, or navigating steep gradients. These semi-metallic pads are formulated to maintain a strong, predictable friction level across a wide operating temperature range, ensuring consistent stopping power under high axle loads and heavy traffic conditions.

Built to withstand extreme thermal stress, the DFC heavy-duty friction compound is rotor-friendly while offering improved durability over standard organic pads. This kit includes the necessary premium hardware to ensure a complete and quiet installation, reducing vibration and drag. The semi-metallic construction provides the essential bite required for off-road use and high-speed braking without excessive noise or dust.

• Manufacturer Part Number: 1214-1084-01
• Position: Front
• Material: Semi-Metallic
• Environment: Heavy Duty / Towing / Off-Road / Steep Gradients
• Attributes: Low noise, low dust, and rotor-friendly formulation
• Included: Front brake pads and application-specific hardware kit

Fits select 2000-2025 Toyota Tacoma, Tundra, Sequoia, 4Runner, FJ Cruiser, and Lexus GX470. This DFC JAC Frison Front Heavy Duty Brake Pad and Hardware Kit is specifically engineered for vehicles operating in extreme environments, including heavy traffic, steep gradients, and off-road conditions.

Constructed from a premium semi-metallic friction material, these pads provide a predictable and consistent friction level regardless of operating temperature, axle load, or vehicle speed. Designed to withstand high heat without compromising rotor life, this kit is the ideal solution for towing and hauling applications where reliable stopping power is critical.

• Semi-metallic friction material for high-temperature stability
• Low noise and low dust formula for cleaner, quieter operation
• Rotor-friendly design to minimize premature wear
• Engineered for predictable braking under heavy axle loads
• Includes complete hardware kit for a thorough service
• Manufacturer Part Number: 1214-0976-01

Fits 2004-2008 Ford F-650 and F-750 trucks. These DFC Heavy Duty Semi-Metallic Brake Pads are engineered for medium-duty vehicles operating in demanding environments, from high-traffic commercial routes to steep mountain gradients.

Constructed with a high-performance semi-metallic compound, these pads deliver predictable friction and consistent stopping power across a wide range of operating temperatures and axle loads. Designed for durability in towing and off-road applications, they provide a rotor-friendly interface that balances aggressive bite with low noise and dust output.

• Manufacturer Part Number: 1214-0786-00
• Material: Heavy Duty Semi-Metallic
• Position: Front or Rear (Verify per application)
• Designed for extreme braking environments, including heavy towing and hauling
• Stable friction levels regardless of speed or temperature
• High thermal capacity to prevent brake fade
• Low-noise and low-dust formulation compared to standard heavy-duty pads

Fits select 1999-2020 Cadillac DeVille and DTS, Chevrolet Silverado and Sierra (1500HD/2500/3500), Express and Savana (2500/3500), Suburban and Yukon XL 2500, and Hummer H2.

The DFC 1214-0784-01 Heavy Duty Semi-Metallic Front Brake Pads and Hardware Kit is engineered for vehicles operating in extreme environments. Whether you are towing heavy loads, navigating steep gradients, or managing stop-and-go fleet traffic, these pads deliver a predictable friction level regardless of axle load or operating temperature. The semi-metallic compound is specifically formulated to withstand high thermal stress while remaining rotor-friendly for extended component life.

• Semi-metallic formulation provides consistent performance in high-speed and high-heat conditions
• Low-noise and low-dust friction material for a cleaner, quieter braking experience
• Includes application-specific premium hardware kit for a complete and secure installation
• Engineered for demanding applications including towing, off-roading, and heavy-duty fleet use
• Direct replacement for the front axle with no modifications required
• Manufacturer Part Number: 1214-0784-01

Engineered for the demanding duty cycles of fleet and commercial use, the DFC 91-24 Heavy Duty Brake Pad and Hardware Kit provides consistent stopping power for Blue Bird TC1000 applications. These semi-metallic pads are specifically formulated to maintain a predictable friction level across extreme operating temperature ranges, making them ideal for heavy traffic, steep gradients, towing, and high-speed braking environments.

Built to withstand thermal stress without compromising rotor longevity, this kit includes application-specific hardware to ensure a complete and quiet installation. The semi-metallic compound balances high-temperature performance with low dust and noise characteristics, providing reliable deceleration regardless of axle load.

• Manufacturer Part Number: 1214-0769-01
• Material: Heavy Duty Semi-Metallic
• Fitment: Blue Bird TC1000 (Front or Rear)
• Operating Range: Engineered for high-heat and extreme braking environments
• Features: Rotor-friendly formula with low noise and low dust output
• Included: Brake pads and necessary installation hardware

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Charger, Magnum, and Jeep Grand Cherokee.

DBA Street Series brake pads are engineered as a high-quality OE-replacement solution for daily driven vehicles. Developed to meet or exceed original equipment standards, these pads utilize a application-specific friction formulation that provides consistent stopping power and reliable thermal stability. Designed to integrate seamlessly with DBA Street Series disc rotors, these pads offer a direct-fit installation that restores factory braking performance without the need for modifications.

• Engineered for OE-level or better braking performance
• Application-specific friction formulation for optimal pad life and noise reduction
• Direct replacement for factory front brake pads
• Designed to complement DBA Street Series disc rotors
• Manufacturer Part Number: DB2259SS

Fits select 2005-2021 Alfa Romeo, Ford, Lexus, Maserati, Mercedes-Benz, and Subaru vehicles including Giulia, Stelvio, Mustang, IS F, Ghibli, GranTurismo, Quattroporte, CLK/SLK, and WRX.

DBA Street Series brake pads are engineered for drivers seeking OE-level performance or better for daily driving and spirited street use. These pads are developed with a specific friction formulation optimized for each application, ensuring a consistent pedal feel and reliable stopping power. Designed as a direct-fit replacement for factory components, they work most effectively when paired with DBA Street Series disc rotors to provide a balanced braking system with minimal noise and dust.

Each pad set is manufactured to maintain tight tolerances for easy installation into factory calipers. By focusing on thermal stability and friction longevity, DBA delivers a brake pad that handles the demands of modern performance vehicles while maintaining the comfort required for everyday commuting.

• Manufacturer Part Number: DB1845SS
• Position: Front
• Friction Material: Application-specific street formulation
• Designed to meet or exceed OE friction levels
• Engineered for use with DBA Street Series rotors
• Direct fit for factory mounting points

Fits select 2006-2022 Subaru BRZ, Legacy, Outback, Tribeca, Scion FR-S, and Toyota 86 models (without Brembo calipers).

DBA Street Series brake pads are engineered for drivers seeking original equipment (OE) level performance or better. Developed with application-specific friction formulations, these pads provide reliable stopping power and consistent pedal feel for daily street use. They are designed to serve as a direct-fit replacement and are the ideal pairing for DBA Street Series disc rotors.

• Application-specific friction formulation for optimized braking performance
• Designed to meet or exceed OE quality and tolerances
• Engineered for consistent stopping power in daily driving conditions
• Direct replacement for factory rear brake pads
• Manufacturer Part Number: DB1789SS

Fits select 2017-2022 Subaru Forester, Impreza, Legacy, and Outback models.

DBA Street Series brake pads are engineered for drivers seeking original equipment performance or better. Developed with application-specific friction formulations, these pads provide reliable stopping power and consistent pedal feel for daily driving. They are specifically designed to work in tandem with DBA Street Series disc rotors for optimal braking efficiency and reduced component wear.

• Direct replacement for factory front brake pads
• Application-specific friction material for consistent performance
• Designed to complement DBA Street Series rotors
• Engineered for OE-level or superior braking response
• Manufacturer Part Number: DB15042SS

Fits 2001-2005 Lexus IS300.

DBA Street Series brake pads are engineered to provide OE-level performance or better for daily driving applications. Developed with application-specific friction formulations, these rear pads deliver consistent stopping power and a predictable pedal feel. They are specifically designed to complement DBA Street Series disc rotors, ensuring a balanced braking system and a direct-fit installation into the factory calipers.

• Optimized friction formulation specifically for the IS300 application
• Engineered to meet or exceed original equipment braking standards
• Designed for seamless compatibility with DBA Street Series rotors
• Direct-fit replacement for worn factory rear brake pads
• Manufacturer Part Number: DB1416SS

Fits select 2015-2024 Jaguar, Land Rover, and Volvo models (including E-Pace, F-Pace, Discovery Sport, Range Rover Evoque, XC60, and XC90).

Specifically engineered for the North American market, Brembo Premium NAO Ceramic brake pads deliver an OE-equivalent braking experience with a focus on comfort and cleanliness. These pads utilize a Non-Asbestos Organic (NAO) friction material that is formulated to minimize brake dust while providing smooth, quiet stopping power. Each pad features a premium multi-layer shim designed to dampen vibrations and eliminate brake squeal, making them an ideal choice for luxury SUVs and sedans.

• Low Dust Formulation: Keeps wheels cleaner for longer periods by reducing the volume of friction-generated dust.
• Quiet Operation: Advanced shims and material composition ensure comfortable, noise-free braking.
• OE-Equivalent Fit: Designed to meet or exceed original equipment standards for a precise installation in the rear brake calipers.
• Application Specific: Every pad set is tailored to the unique weight and braking requirements of the vehicle's chassis.
• Manufacturer Part Number: P86029N
• Position: Rear
• Material: Premium Ceramic (NAO)

Fits select 2015-2024 Jaguar (E-Pace, F-Pace, XE, XF), Land Rover (Discovery Sport, Range Rover Evoque, Range Rover Velar), and Volvo (S60, S90, V60, V90, XC60, XC90) models.

Brembo Premium Low-Met brake pads are engineered for drivers who demand the braking characteristics of an original equipment European pad. Formulated specifically for the North American market, these pads utilize a low-metallic friction material that delivers superior stopping power across all driving conditions while maintaining comfortable, quiet operation. Every pad set includes premium shims to dampen vibration and minimize noise, while the formulation is designed to keep wheels cleaner compared to traditional low-met compounds.

• OE Equivalent Performance: Formulations engineered to match or exceed factory braking power and modulation.
• ECE-R90 Approved: Fully certified to meet rigorous European safety and performance standards.
• Premium Construction: Equipped with multi-layer shims and precise backing plates for a perfect fit in the factory rear calipers.
• Clean & Quiet: Optimized friction material reduces brake dust and prevents squeal.
• Manufacturer Part Number: P86029

Fits select 2016-2024 Volvo C40, S60, S90, V60, V60 Cross Country, V90, V90 Cross Country, XC40, XC60, and XC90 models.

Brembo Premium NAO Ceramic brake pads are engineered specifically for the North American market to deliver a comfortable, quiet, and smooth braking experience. These front pads utilize a specialized Non-Asbestos Organic (NAO) ceramic friction material that significantly reduces brake dust compared to traditional semi-metallic pads, keeping wheels cleaner for longer.

Every pad includes a premium multilayer shim designed to dampen vibrations and eliminate brake squeal. As an OE-equivalent replacement, these pads are built to match the unique needs of each Volvo application, ensuring consistent pedal feel and reliable stopping power for daily commuting and luxury touring.

• Material: Premium NAO Ceramic formulation
• Position: Front axle
• Hardware: Multilayer shims included for noise suppression
• Performance: Low-dust, smooth engagement, and quiet operation
• Part Number: P86027N