Fits select 2005-2022 Acura ILX and TSX, Honda Accord, and Suzuki SX4.

These R1 rear brake rotors provide a dependable direct-fit replacement for your vehicle's worn factory discs. Engineered to restore original braking performance, these rotors address common issues such as pedal pulsation, vibration, and reduced stopping power. Each rotor is machined to precise tolerances to ensure proper fitment with your existing calipers and pads, making them a straightforward solution for routine brake maintenance or a full system overhaul.

• Direct replacement for factory rear rotors ensures a hassle-free installation
• Cast from high-strength alloys for improved thermal stability and durability
• Double disc ground finish promotes faster pad bed-in and smoother stopping
• Mill-balanced to prevent high-speed vibrations and ensure quiet operation
• Matches OE specifications for cooling and structural integrity

Fits select 2002-2015 Acura RSX, Honda Civic, and Honda CR-Z.

This R1 Front Brake Rotor Set provides a direct-fit solution for restoring your vehicle's original stopping performance. Designed to meet or exceed OE specifications, these rotors replace worn or warped factory discs to eliminate brake pulsation and ensure consistent pedal feel. Each rotor is precision-machined for optimal balance and smooth operation, providing reliable thermal management for daily driving conditions.

• Includes two (2) front brake rotors
• Direct bolt-on installation to factory mounting points
• Matches original equipment dimensions for compatibility with stock calipers
• Engineered for consistent friction surface contact and heat dissipation

Fits 2000-2009 Honda S2000 (Base / CR).

This R1 brake rotor set provides a direct-fit solution for the front axle of your Honda S2000, restoring the braking bite and thermal stability required for both daily driving and spirited use. Precision-engineered to match original equipment specifications, these rotors ensure reliable stopping power and consistent pedal feel by replacing warped or thin factory discs.

• Direct-fit replacement for factory front brake rotors
• Precision-machined for optimal balance and reduced vibration
• Engineered for effective heat dissipation under load
• Compatible with 2000-2009 Honda S2000 Base and CR submodels
• Includes a pair of front rotors

Fits select 1997-2006 Acura Integra Type R, RSX (Base and Type-S), Honda Accord (EX, LX), and Civic Si models.

These R1 rear brake rotors provide a direct-fit solution for restoring the braking performance and safety of your vehicle. Engineered to match original equipment specifications, these rotors utilize a high-quality casting process to ensure consistent heat dissipation and structural integrity under various driving conditions. Whether you are maintaining a daily driven Accord or a performance-oriented Integra Type R, these rotors offer the reliable stopping power and pedal feel required for confident driving.

Precision machining ensures a smooth, balanced friction surface that minimizes vibration and promotes even pad wear. These rotors bolt directly to the factory hubs without the need for brackets or modifications, making them an ideal choice for enthusiasts performing a routine brake service or complete overhaul.

• Position: Rear
• Fitment Type: Direct OE Replacement
• Fits 1997-2001 Acura Integra Type R
• Fits 2002-2006 Acura RSX (Base and Type-S)
• Fits 1998-2002 Honda Accord (EX, LX)
• Fits 2004-2005 Honda Civic Si
• Cast from durable alloy for optimal thermal management

Fits select 1988-2013 Acura, Honda, and Suzuki models including Integra, Civic, Prelude, and SX4 (see fitment table for specific submodels).

R1 Rear Brake Rotors provide a direct-fit replacement for your factory brake discs, engineered to restore the stopping performance and safety of your vehicle. These rotors are designed for drivers needing to replace warped or worn-out factory units to eliminate pedal pulsation and ensure consistent braking response. Each rotor is precision-machined to match original equipment (OE) specifications for a hassle-free installation on the rear axle.

• Manufactured to meet OE standards for fit, form, and functional reliability.
• Precision-machined braking surfaces ensure smooth pad-to-rotor contact and even wear.
• Cast from durable alloys to manage heat and resist thermal warping during normal driving conditions.
• Direct-fit design replaces factory rear rotors without requiring modifications.
• Compatible with Acura Integra (1990-2001), Honda Prelude (1988-1991), and Suzuki SX4 (2007-2013) applications.

Fits 2016-2018 Ford Focus RS.

Restore the high-performance stopping power of your Ford Focus RS with this R1 Front Brake Rotor Set. These rotors are engineered as direct-fit replacements for worn or heat-cycled factory units, providing the thermal stability and friction surface required for the RS's demanding braking system. Designed to meet precise tolerances, they ensure consistent pedal feel and reliable performance during spirited driving or daily commuting.

• Direct replacement for factory front brake rotors
• Precision cast for optimal heat dissipation and durability
• Designed specifically for the 2016-2018 Ford Focus RS chassis
• Sold as a complete front set (pair)

Fits select 2007-2021 Ford Expedition, F-150, and Lincoln Navigator.

This R1 front brake rotor set provides a reliable direct replacement for your vehicle's worn- out factory rotors. Engineered to meet the demanding requirements of full-size SUVs and trucks, these rotors restore the consistent stopping performance and pedal feel you expect. Each rotor is precision-machined to ensure balanced operation, reducing the risk of steering wheel vibration and ensuring a smooth pad bed-in process.

• Direct-fit replacement for factory front brake rotors
• Precision-machined for optimal balance and reduced NVH (noise, vibration, and harshness)
• Vented design helps dissipate heat to prevent brake fade during heavy use
• High-quality casting provides long-term durability and thermal stability
• Includes two (2) front brake rotors
• Fits 2007-2020 Ford Expedition, 2010-2020 Ford F-150, and 2007-2021 Lincoln Navigator

Fits select 2018-2026 BMW 2, 3, 4 Series, i4, X3, X4, Z4, and 2021-2024 Toyota GR Supra.

This R1 Front Brake Rotor Set is engineered for consistent stopping power and reliable performance. Designed as a direct OE replacement, these rotors bolt directly to your factory hubs, maintaining the original braking geometry and balance of your vehicle. The precision-machined surface ensures even heat distribution to minimize the risk of warping and brake fade during repeated use.

• Manufactured to precise tolerances for a vibration-free fit.
• Direct replacement for worn or thin factory front rotors.
• Optimized metallurgy for improved thermal management.
• Sold as a complete front axle set (Pair).

Fits select 2004-2025 Subaru (BRZ, Forester, Outback, Legacy, Impreza, Crosstrek, Baja), Toyota (86, GR86), and Scion (FR-S) models.

This R1 Front Brake Rotor Set provides a direct-fit solution for restoring or maintaining your vehicle's braking performance. Engineered to meet precise tolerances, these rotors are designed to replace worn factory units and provide consistent stopping power for daily driving and performance applications. Each rotor is manufactured for durability and heat dissipation, ensuring reliability across a wide range of operating conditions.

• Direct replacement for factory front brake rotors
• Precision-machined for smooth operation and reduced vibration
• High-quality construction for long-term service life
• Sold as a complete front set (Pair)

Fits select 2001-2013 Saab 9-2X, Subaru Baja, Forester, Impreza, Legacy, and Outback, and Suzuki SX4.

Restore original stopping performance and safety with R1 front brake rotors. These replacement rotors are engineered to provide reliable braking power and consistent thermal management, making them an ideal solution for replacing warped or thin factory units. Designed as a direct-fit component, they bolt onto the factory mounting points without modification, ensuring a straightforward installation and predictable pedal feel.

• Direct-fit replacement for the original equipment front rotors
• Precision-machined surfaces to minimize vibration and runout
• Durable construction designed for consistent heat dissipation
• Specifically engineered for select Subaru, Saab, and Suzuki applications

Fits select 2015-2025 Subaru Forester, Legacy, Outback, and WRX models.

This R1 rear brake rotor set is designed to replace worn or warped factory components, restoring the reliable stopping power and pedal feel your vehicle had when it left the showroom. These rotors are precision-machined to match original equipment specifications, ensuring a direct-fit installation on the rear axle without the need for modifications.

Replacing brake rotors in pairs is critical for maintaining balanced braking performance. This set provides consistent friction surfaces for both sides of the vehicle, which helps prevent uneven pad wear and eliminates the vibrations or pulsation often associated with heat-damaged rotors.

• Direct replacement for factory rear brake rotors
• Precision-machined for consistent thickness and tight runout tolerances
• Sold as a set of two (2) rotors for a complete rear axle service
• Matches original equipment geometry for a hassle-free install

Fits select 2008-2015 Subaru BRZ, Forester, Impreza, Legacy, and Outback.

This R1 rear brake rotor set is designed to replace worn factory components, restoring the braking efficiency and safety of your vehicle. Each rotor is precision-engineered to meet original equipment standards, ensuring a direct-fit installation without the need for modification. These rotors provide the necessary thermal stability and structural integrity for consistent stopping power and reliable performance under daily driving conditions.

• Direct replacement for factory rear brake rotors
• Manufactured for consistent heat dissipation and durability
• Precision-machined surfaces for smooth braking and reduced vibration
• Engineered to OE specifications for fit and function
• Set includes two (2) rear brake rotors

Fits select 2015-2026 Hyundai and Kia models, including Sonata, Tucson, Kona, Seltos, Optima, and Sportage.

Restore your vehicle's stopping power and safety with these R1 Front Brake Rotors. Engineered as a direct replacement for your worn or warped factory discs, these rotors are designed to meet or exceed OE specifications for fitment, structural integrity, and thermal performance. Whether you are daily commuting or hauling a full load, these rotors provide consistent pedal feel and reliable braking response.

• Precision-machined for a direct bolt-on installation with no modifications required.
• High-quality casting for maximum heat dissipation and resistance to thermal cracking.
• Optimized for smooth, quiet operation when paired with compatible brake pads.
• Designed to maintain consistent friction levels across a wide range of operating temperatures.

Fits 2019-2022 Hyundai Veloster N (Base).

Maintain the stopping power and safety of your performance hatchback with this R1 front brake rotor set. Designed as a direct replacement for worn factory units, these rotors restore the consistent pedal feel and thermal stability required for both spirited driving and daily commuting. Each rotor is precision-machined to match original equipment specifications, ensuring a perfect fit to your factory hubs without the need for modification.

• Position: Front
• Quantity: Set of 2 Rotors
• Fitment: 2019-2022 Hyundai Veloster N Base
• Direct OEM replacement for reliable braking performance
• Engineered for consistent heat dissipation and durability

Fits select 2007-2026 Hyundai Elantra, Kona, Veloster, and Venue; Kia Forte, Seltos, and Soul; and Suzuki SX4.

Replace your worn or warped factory discs with these R1 front brake rotors, engineered to restore consistent stopping power and pedal feel. These rotors are designed as a direct-fit replacement for your original equipment, ensuring a straightforward installation process without the need for modifications. Precision-machined for balance and smooth operation, they provide reliable thermal stability for everyday driving conditions.

• Direct-fit replacement for factory front brake rotors
• Cast from high-quality iron for durability and heat dissipation
• Precision-machined surfaces for consistent friction and reduced vibration
• Designed to meet or exceed OE specifications for fit and function
• Engineered for 2007-2026 Hyundai, Kia, and Suzuki applications

Fits select 2011-2026 Hyundai and Kia models including Elantra, Kona, Veloster, Venue, Forte, Seltos, and Soul.

This R1 rear brake rotor set is engineered to restore factory-level braking performance and reliability. Designed as a direct replacement for worn or warped original equipment, these rotors ensure precise fitment with your vehicle's existing calipers and hubs. Each rotor is machined to exacting tolerances to minimize vibration and provide a smooth, consistent pedal feel during everyday driving.

• Position: Rear (Left and Right)
• Fitment Type: Direct OE replacement
• Compatibility: Works with factory mounting hardware and calipers
• Application: Designed for 2011-2026 Hyundai and Kia passenger vehicles

Fits select 2015-2020 Dodge Challenger and Charger models, including SRT Hellcat, Scat Pack, and 392 trims.

This pair of DFC Front Slotted Brake Rotors is engineered to provide consistent stopping power and improved thermal management for high-performance Mopar applications. The CNC-machined slotted faces serve a critical functional purpose: they vent brake gases, dust, and debris away from the contact patch, ensuring the brake pad maintains a clean surface for maximum friction. This design effectively reduces brake fade during aggressive driving and provides a more immediate pedal feel.

• Front axle pair (includes left and right rotors)
• Slotted surface design for superior heat dissipation and gas venting
• Precision machined to maintain factory balance and prevent vibration
• Direct replacement for OE-style rotors with factory-correct dimensions
• Engineered for high-output models like the Hellcat and SRT 392

Vehicle Fitment:

Fits select 2013-2018 Subaru Forester, Crosstrek, and XV Crosstrek (2.5i and Hybrid models). This complete front and rear brake kit provides a comprehensive solution for restoring original equipment stopping power and refinement.

The DFC Premium Brake Rotors are cast to G3000 specifications for high-carbon strength and thermal stability. Each rotor is precision-machined to tight tolerances and features a non-directional finish to facilitate faster pad bed-in and quieter operation. To ensure long-term reliability and smooth performance at all speeds, all vented rotors are 100% mill-balanced and silver zinc-plated for superior corrosion resistance.

Paired with the rotors are DFC 4000 HybriDynamic brake pads. These 100% asbestos-free pads are scorched during manufacturing to remove uncured bonding agents, reducing the initial break-in period. Integrated rubber-steel-rubber shims provide advanced NVH (Noise, Vibration, and Harshness) control, while the included stainless steel hardware and rubber-coated abutment clips eliminate drag and premature wear.

• Complete front and rear axle kit including rotors, pads, and hardware
• G3000/G11H18 iron castings for maximum durability and heat dissipation
• Silver zinc plating protects against rust and corrosion
• 4000 Series HybriDynamic pads are scorched for immediate stopping power
• Premium RSR shims and chamfered/slotted design reduce braking noise
• Direct fit replacement with no modifications required
• Manufacturer Warranty: 12-month / 12,000-mile limited warranty

Fits select 2009-2012 Subaru Forester, Impreza, Legacy, and Outback models (including WRX and XT trims).

This DFC brake kit provides a complete overhaul for your vehicle's braking system, combining G3000-spec iron rotors with 4000 HybriDynamic brake pads for consistent, reliable stopping power. Each rotor is engineered to match OEM specifications for durability and stability, featuring a non-directional finish that accelerates the bed-in process for quieter operation right out of the box. The pads are scorched during manufacturing to remove uncured bonding agents, further reducing the initial break-in period and ensuring optimal friction from the very first stop.

To ensure smooth performance at any speed, every vented rotor undergoes a 100% electronic mill-balancing process to eliminate vibrations. The silver zinc plating provides essential corrosion protection, while the included stainless steel hardware and rubber-coated abutment clips reduce drag and prevent premature wear.

• Premium G3000/G11H18 iron castings for maximum strength and durability
• 100% precision mill-balanced for vibration-free stopping
• Silver Zinc Plated rotors for superior corrosion resistance
• 4000 HybriDynamic pads are 100% asbestos-free and scorched for faster break-in
• Premium rubber-steel-rubber shims significantly reduce NVH (noise, vibration, and harshness)
• Stainless steel hardware kits included to improve fuel efficiency and minimize drag
• Direct-fit design requires no modifications for installation
• 12-month / 12,000-mile limited manufacturer warranty

Fits select 2002-2025 Nissan Altima, Juke, Maxima, and Sentra models.

This DFC rear brake kit provides a complete solution for restoring factory-level stopping performance and quiet operation. The kit pairs DFC Premium G3000 cast iron rotors with 4000 HybriDynamic brake pads, ensuring matched friction and rotor metallurgy for consistent pedal feel and reduced vibration. Each rotor is precision mill-balanced and finished with a non-directional ground surface to accelerate the bed-in process.

The included 4000 HybriDynamic pads are scorched during manufacturing to remove uncured bonding agents, providing immediate stopping power from the first install. To ensure a professional-grade repair, this kit includes a complete hardware set with rubber-coated abutment clips and premium rubber-steel-rubber shims to eliminate brake squeal and chatter.

• Rotors: Cast from G3000/G11H18 iron with a silver zinc plating for superior corrosion resistance.
• Brake Pads: 100% asbestos-free formulation, scorched for faster break-in and increased initial bite.
• Hardware: Includes stainless steel clips and rubber-coated abutment hardware to resist heat and corrosion.
• Installation: Designed to meet OE form, fit, and function with no vehicle modifications required.

• Manufacturer: DFC (Dynamic Friction Company)
• Series: 4000 HybriDynamic
• Position: Rear
• Rotor Material: G3000 Cast Iron
• Rotor Finish: Silver Zinc Plated / Non-Directional Ground
• Hardware Included: Yes
• Warranty: 12-Month / 12,000-Mile Limited

Fits select 2005-2018 Acura RDX and Honda CR-V (Base, EX, EX-L, LX, SE, Touring).

Restore your vehicle's stopping power and ride quality with this complete rear brake kit from Dynamic Friction Company. This matched set includes DFC Premium G3000-spec rotors and 4000 HybriDynamic brake pads, specifically engineered to provide consistent, quiet performance that meets or exceeds original equipment standards. Every rotor is precision mill-balanced to eliminate vibration at any speed and features a silver zinc plating to resist corrosion on the hub and vanes.

The 4000 HybriDynamic pads are scorched during manufacturing to remove uncured bonding agents, significantly shortening the break-in period and providing immediate pedal response. This kit is rounded out with a comprehensive hardware set, featuring stainless steel abutment clips and premium rubber-steel-rubber shims to minimize drag and isolate noise for a smoother, more efficient drive.

• Precision Rotors: Cast from G3000/G11H18 iron with a non-directional finish for faster pad bed-in.
• HybriDynamic Pads: 100% asbestos-free formulation with chamfers and slots to reduce braking noise.
• Premium Shims: Rubber-Steel-Rubber construction for superior NVH (Noise, Vibration, and Harshness) control.
• Corrosion Protection: Rotors are silver zinc plated to prevent rust and maintain a clean appearance.
• Hardware Included: Stainless steel hardware and rubber-coated abutment clips for a complete, bolt-on installation.
• Warranty: 12-month / 12,000-mile limited warranty against manufacturing defects.

Fits select 2010-2025 Scion FR-S, Subaru BRZ, Forester, WRX, and Toyota 86/GR86.

This DFC 4000 Series HybriDynamic Front Brake Kit is a comprehensive solution for restoring original equipment braking performance and pedal feel. The kit features DFC Premium rotors cast from G3000/G11H18 iron for maximum thermal stability and resistance to warping. Each rotor is 100% precision mill-balanced to eliminate high-speed vibration and finished with a non-directional ground surface to accelerate the pad bed-in process and ensure quiet operation from the first stop.

The included 4000 HybriDynamic pads are scorched during manufacturing to remove uncured bonding agents, providing immediate stopping power and reducing the initial break-in period. To maintain a smooth, silent ride, the kit includes application-specific hardware and Premium Rubber-Steel-Rubber shims designed to isolate noise, vibration, and harshness (NVH).

• G3000/G11H18 cast iron rotors for OE-grade strength and durability
• Silver zinc plating on rotors provides superior corrosion protection
• 100% mill-balanced for vibration-free stopping at all speeds
• Scorched pads for improved initial bite and faster break-in
• Rubber-Steel-Rubber shims and rubber-coated abutment clips reduce brake squeal
• Stainless steel hardware components resist heat and corrosion deterioration
• 100% asbestos-free friction formulation

This DFC rear brake kit provides a complete solution for maintaining the braking performance of select 2008-2015 Subaru BRZ, Forester, Impreza, Legacy, and Outback models. By combining G3000-spec cast iron rotors with 4000 HybriDynamic brake pads, this kit ensures reliable stopping power, reduced noise, and a precise fit that matches original equipment standards.

The included DFC Premium brake rotors are engineered from G3000/G11H18 iron castings for maximum stability and durability. Each rotor is precision mill-balanced to eliminate vibration and finished with a non-directional ground surface to accelerate the pad bed-in process. To prevent rust and maintain a clean appearance behind your wheels, the rotors feature a silver zinc plating.

The 4000 HybriDynamic brake pads are scorched during manufacturing to remove uncured bonding agents, providing immediate pedal feel from the first stop. These 100% asbestos-free pads utilize rubber-steel-rubber (RSR) shims to isolate vibration and noise. This kit is completed with premium stainless steel hardware and rubber-coated abutment clips to ensure smooth caliper movement and prevent premature wear.

• Fits select 2008-2015 Subaru BRZ, Forester, Impreza (including WRX), Legacy, and Outback models.
• G3000/G11H18 cast iron rotors for high tensile strength and thermal stability.
• Silver zinc plated rotors for long-lasting corrosion resistance.
• 4000 Series HybriDynamic pads scorched for faster break-in.
• Multi-layer rubber-steel-rubber shims for superior NVH control.
• Includes stainless steel hardware kits to reduce drag and fuel inefficiency.
• 100% precision mill-balanced for vibration-free operation.
• Backed by a 12-month / 12,000-mile limited warranty.

Fits select 2004-2012 Subaru Baja, Forester, Impreza, Legacy, and Outback models.

This DFC Premium Brake Kit is a complete front-end solution designed to restore original braking performance and eliminate vibration. Each kit features DFC 4000 HybriDynamic brake pads and G3000-spec cast iron rotors, engineered to match factory tolerances for a direct-replacement fit. The rotors are 100% precision mill-balanced to ensure smooth, vibration-free operation and are finished with silver zinc plating for superior corrosion resistance.

The 4000 Series HybriDynamic pads are scorched during manufacturing to remove uncured bonding agents, significantly shortening the break-in period and providing immediate stopping power. Paired with stainless steel hardware and rubber-steel-rubber shims, this setup minimizes NVH (noise, vibration, and harshness) while reducing premature wear on calipers and slides.

• Precision Rotors: Cast from G3000/G11H18 iron for high thermal stability and structural integrity.
• HybriDynamic 4000 Pads: 100% asbestos-free formulation with scorched surfaces for faster bed-in.
• Smooth Operation: Non-directional rotor finish promotes even pad wear and quieter stops.
• Corrosion Protection: Silver zinc plating helps prevent rust on the rotor hat and vanes.
• Installation Ready: Includes a complete hardware kit with rubber-coated abutment clips for reduced drag.
• Warranty: Manufacturer 12-month / 12,000-mile limited warranty.

Fits select 2002-2008 Saab 9-2X and Subaru models (Baja, Forester, Impreza WRX, Legacy, and Outback).

This DFC Front Brake Rotor and Pad Kit is engineered to restore factory-level braking performance with enhanced durability and quieter operation. The package combines DFC Premium G3000 cast iron rotors with 4000 HybriDynamic brake pads, providing a complete solution for high-friction stopping power and consistent thermal stability. Each rotor features a non-directional finish to accelerate the bed-in process and is silver zinc plated to resist corrosion on the hubs and vanes.

The included 4000 HybriDynamic brake pads are scorched during manufacturing to remove uncured bonding agents, ensuring immediate bite right out of the box. To manage Noise, Vibration, and Harshness (NVH), the kit utilizes premium Rubber-Steel-Rubber (RSR) shims and stainless steel hardware that resists heat-related deterioration and prevents premature wear.

• Precision Engineering: Rotors are 100% mill-balanced to eliminate vibration and machined to tight tolerances for smooth pedal feel.
• Premium Construction: Rotors cast from G3000/G11H18 iron for superior strength and longevity.
• Hybrid Friction: 100% asbestos-free pad formulation designed for a balance of long life and quiet stopping.
• Corrosion Protection: Silver zinc plating helps prevent rust buildup on non-friction surfaces.
• Complete Installation: Includes rubber-coated abutment clips and all necessary hardware for a direct, bolt-on replacement.
• Warranty: Manufacturer 12-month / 12,000-mile limited warranty against material and workmanship defects.

Fits select 2010-2015 Subaru BRZ, Forester, Impreza WRX, Legacy, and Outback.

This DFC 5000 Advanced Brake Pad and Rotor Kit provides a comprehensive four-wheel solution for restoring original equipment braking performance. Designed to meet the precise tolerances of your vehicle's hydraulic system, this kit eliminates the guesswork of matching components by including all necessary rotors, pads, and high-quality hardware in one package. It is an ideal choice for daily drivers seeking reliable stopping power, low noise, and a factory-quality pedal feel.

• Complete Kit: Includes both front and rear rotors, a full set of 5000 Advanced brake pads, and application-specific mounting hardware.
• Advanced Friction: 5000 Advanced pads are engineered to provide consistent friction across a wide temperature range while minimizing dust and rotor wear.
• Precision Rotors: Cast from G3000/G3001 metallurgy to ensure thermal stability and resistance to warping under heavy braking.
• Hardware Included: Abutment clips and stainless steel hardware help prevent pad rattle and ensure even wear.
• Direct Fit: Machined to exact OE specifications for a bolt-on installation without modifications to the calipers or hubs.

This DFC 5000 Advanced brake kit provides a complete service solution for the front and rear of select 2022-2023 Genesis G70 and Kia Stinger models (2.5L). This comprehensive package is designed to restore factory-level braking performance or better by replacing worn rotors and pads with matched, precision-engineered components.

The kit features DFC 5000 Advanced brake pads, formulated for consistent friction levels across a wide temperature range and quiet operation. The accompanying rotors are machined to strict tolerances to ensure proper balance and heat dissipation, preventing the pedal pulsation often found in inferior replacements. With all necessary hardware included, this kit simplifies the installation process by providing everything needed for a full axle-to-axle brake refresh.

• Includes 2 front rotors, 2 rear rotors, and 5000 Advanced brake pads for all wheels
• Direct-fit installation replaces factory OE braking components
• Premium friction material for reliable stopping power and low dust
• High-quality hardware included to ensure a secure, quiet fitment
• Engineered for the 2.5L powertrain found in specific G70 and Stinger trims

Fits select 2008-2021 Lexus NX200t, NX300, NX300h, RX350, RX450h, and Toyota Highlander and Sienna.

This DFC 5000 Advanced Brake Kit is engineered to restore factory-level braking performance and consistency. By pairing matched front brake rotors with 5000 Advanced brake pads, this kit eliminates the guesswork of sourcing individual components. The rotors are manufactured to precise tolerances for a direct-fit installation on factory hubs, ensuring smooth rotation and reliable thermal dissipation during repeated stops.

The included 5000 Advanced brake pads are formulated to provide a stable friction coefficient across a wide temperature range, delivering a predictable pedal feel and quiet operation. To ensure a complete service, this kit includes application-specific stainless steel hardware to replace worn or corroded factory clips, reducing the risk of pad drag and uneven wear.

• Complete front axle solution including rotors, pads, and hardware
• Direct-fit replacement for factory brake components
• 5000 Advanced friction formula for reliable stopping power and low noise
• Precision-machined rotors ensure smooth operation and balanced performance
• Includes all necessary stainless steel installation hardware

Fits select 2012-2023 Subaru Impreza, Forester, Crosstrek, and XV Crosstrek models.

Restore the stopping power and pedal feel of your Subaru with the DFC 5000 Advanced Rear Brake Kit. This complete service solution pairs precision-machined brake rotors with DFC 5000 Advanced brake pads, designed to provide consistent friction across a wide temperature range. By replacing worn-out components with this matched set, you eliminate the vibration, pulsation, and noise often associated with high-mileage factory brakes.

• DFC 5000 Advanced brake pads formulated for low noise and stable performance.
• G3000/G3001 metallurgy rotors precision-cut for a true surface and reliable heat dissipation.
• Includes premium application-specific hardware to ensure correct pad seating and movement.
• Direct replacement for OE components with no modifications required.
• Engineered to meet or exceed factory specifications for fit and durability.