Designed for high-performance driving, the EBC Brakes S6 Stage 6 Kit (MPN: S6KF1108) combines Bluestuff NDX high-friction pads with GD series dimpled and slotted rotors. This kit provides a significant increase in thermal capacity and stopping power for select 2008-2023 Infiniti G37, M37, M56, Q50, Q60, Q70 and Nissan 370Z or Z models.

• Bluestuff NDX Pads: High-friction track and fast-road material designed for aggressive braking and fade resistance.
• GD Series Rotors: Feature wide-aperture slots and blind-drilled dimples to vent gas, dirt, and debris while maintaining structural integrity.
• Thermic Black Coating: A Geomet anti-corrosion finish that provides long-term resistance against rust on non-swept surfaces.
• Installation Note: The Thermic Black coating does not need to be removed prior to installation; it will be naturally cleared from the pad-swept area within the first 10 to 20 stops. Do not use brake cleaner on the coating.
• Safety Requirement: Ensure upgrade pads are fitted to the front axle if they are being installed on the rear.

Fits select 2009-2017 Buick Regal, Chevrolet Camaro, and Pontiac G8 models. This EBC Brakes S6 Series kit combines Bluestuff NDX performance pads with GD Series dimpled and slotted rotors to provide a significant upgrade in stopping power and thermal management.

The GD Series rotors feature a wide-aperture slotted and dimpled design that draws cool air into the braking contact zone, reducing temperatures to prevent brake fade. The dimpled pattern provides effective gas venting without the risk of stress cracks associated with through-drilled holes. Each rotor is finished with a Thermic Black anti-corrosion coating for long-term rust resistance. Important: This coating should not be removed with brake cleaner; the pad will naturally clear the swept area within the first 10 to 20 stops.

The included Bluestuff NDX pads are designed for high-performance use, offering a high friction coefficient and excellent pedal feel. Please note that if you are upgrading the rear pads, they should be matched with the same or similar grade pads on the front to maintain proper brake bias.

• Manufacturer Part Number: S6KF1107
• Kit Series: S6 Kits (Bluestuff Pads and GD Rotors)
• Rotor Style: GD Series Dimpled and Slotted
• Rotor Finish: Thermic Black Anti-Corrosion Coating
• Fitment Years: 2009-2017
• Note: No warranty for race use; not to be cleaned with solvents prior to installation.

Fits select 2003-2020 Infiniti (G35, G37, M-Series, Q70, QX) and Nissan (350Z, 370Z, Murano) models. This EBC S6 Series Stage 6 brake kit is engineered for drivers seeking high-friction performance and thermal stability. The kit pairs EBC Bluestuff NDX high-performance pads with GD Series wide-aperture dimpled and slotted rotors to provide aggressive bite and superior cooling under heavy use.

• Bluestuff NDX Pads: A high-friction entry-level race material suitable for fast street and trackday use, offering excellent pedal feel and fade resistance.
• GD Series Rotors: Features wide-aperture slots and blind-drilled dimples to vent gases, dirt, and debris while maintaining structural integrity and preventing heat-cracking.
• Thermic Black & Geomet Coating: Provides long-lasting anti-corrosion resistance. The black coating on the rotor face is designed to be removed naturally by the pads within the first 10-20 stops.
• Installation Note: Do not use brake cleaner or mechanical methods to remove the Thermic Black coating; doing so will void the warranty.
• Safety Requirement: Performance pads should only be fitted to the rear if the front axle is also upgraded.
• Manufacturer Part Number: S6KF1097

Fits select 2005-2014 Subaru Forester, Impreza, Legacy, and Outback models.

The EBC Brakes Stage 6 kit is a performance-focused braking upgrade designed for drivers who require consistent stopping power and superior thermal management. This kit pairs EBC Bluestuff NDX high-friction pads with GD series dimpled and slotted rotors. The GD rotors feature wide-aperture slots that draw cool air into the contact zone and vent brake gases to prevent fade, while the dimpled design ensures structural integrity without the risk of stress cracks common in fully drilled rotors.

• Manufacturer Part Number: S6KF1094
• Bluestuff NDX pads: Entry-level race pads with high friction and excellent cold bite
• GD series rotors: Dimpled and slotted design for debris removal and heat dissipation
• Thermic Black Geomet coating: Provides long-lasting anti-corrosion protection
• Direct fit replacement for original equipment brake components

Installation Note: Do not use brake cleaner or abrasive methods to remove the Thermic Black coating from the rotors. This anti-rust treatment is designed to be naturally removed by the brake pads in the swept area within the first 10 to 20 stops. Please note that these components are not warranted for race use.

Fits select 2005-2017 Subaru Impreza, WRX, and WRX STI models.

The EBC Brakes S6 Series Stage 6 Brake Kit (S6KF1092) is a high-performance upgrade designed for spirited street driving and entry-level track use. This kit combines EBC Bluestuff NDX high-friction pads with GD Series dimpled and slotted rotors to provide superior thermal management and stopping power compared to OE components. The GD Series rotors feature a wide-aperture slot design that draws cool air into the braking contact area while the dimples maintain structural integrity, preventing the stress cracks common in fully drilled rotors.

These rotors are finished with a Thermic Black anti-corrosion coating. Important Installation Note: Do not use brake cleaner or mechanical methods to remove the Thermic Black coating from the rotors. This protective layer is designed to be worn away by the brake pads in the swept area within the first 10 to 20 stops; attempting to remove it manually will void the warranty. Additionally, never install upgraded pads on the rear of the vehicle without matching upgrades on the front axle to maintain proper brake bias.

• Manufacturer Part Number: S6KF1092
• Brake Pad Series: Bluestuff NDX (High-Performance/Track)
• Rotor Series: GD (Dimpled and Slotted)
• Finish: Thermic Black anti-corrosion and Geomet anti-rust coating
• No warranty provided for competitive racing use

The EBC S6 Brake Pad and Rotor Kit is an all-in-one upgrade designed for select 2002-2013 Acura RSX and Honda Civic models. This pre-matched set combines high-friction pads with wide-aperture slotted rotors to provide a 15% cost savings over purchasing components separately.

Engineered for "weekend warriors," this kit features pads that maintain excellent bite from cold for safe street driving while offering the heat resistance necessary for short track sessions. The included G3000 slotted rotors improve cooling and gas venting, while the Geomet anti-rust coating ensures long-lasting corrosion resistance and a clean appearance behind your wheels.

• Fits select 2002-2013 Acura RSX (Base, Type-S) and Honda Civic (DX, EX, EX-L, GX, Hybrid, LX, LX-S, MUGEN Si, Si).
• Manufacturer Part Number: S6KF1082
• Rotors: Wide-aperture G3000 slotted design with Geomet anti-rust coating.
• Pads: Ultra-high friction track day/street pads with high heat tolerance.
• Installation: Direct fit replacement; no modifications required to factory calipers or brackets.
• Includes: High-performance brake pads, slotted rotors, and caliper lubricant.

Fits 1997-2004 Chevrolet Corvette (Base, Z06, Pace Car) and 2004 Cadillac XLR. This EBC S6 brake kit (S6KF1073) is a high-performance upgrade designed for aggressive driving and track-day use, combining Bluestuff NDX pads with dimpled and slotted GD Series rotors.

The Bluestuff NDX compound provides high friction from cold, maintaining its bite through high temperatures to minimize fade during spirited use. Paired with GD Series rotors, the wide-aperture slots draw cool air across the pad surface while venting dust, debris, and gases. The dimpled design provides the degassing benefits of a drilled rotor without the risk of stress cracking under heavy thermal loads.

• Bluestuff NDX Pads: High-friction track and street compound with excellent thermal recovery.
• GD Series Rotors: Dimpled and slotted for maximum cooling and debris evacuation.
• Thermic Black Coating: Protective Geomet anti-rust finish; do not remove during installation (swept area clears naturally within 10-20 stops).
• Part Number: S6KF1073

Installation Note: Do not install upgrade pads on the rear of the vehicle unless the front has been similarly upgraded. Use of this kit in competitive racing is not covered by warranty.

Fits 2010-2016 Hyundai Genesis Coupe models (2.0T / 3.8) including Premium, R-Spec, Track, Grand Touring, and Ultimate trims.

The EBC Brakes S6 Stage 6 kit is a performance-matched upgrade engineered for the "weekend warrior" who demands consistent stopping power on both the street and the track. This direct-fit kit replaces OEM components with ultra-high friction pads and wide-aperture G3000 slotted rotors. Designed to handle the thermal stress of spirited driving, the included pads provide a strong cold bite while resisting fade at high track temperatures. The G3000 metallurgy and slotted design ensure effective heat dissipation and debris evacuation for reliable pedal feel.

• Direct Fit: Bolts directly to factory locations with no modifications required.
• G3000 Slotted Rotors: Wide-aperture slots help degas pads and maintain a clean contact surface during heavy braking.
• Geomet Coating: Specialized anti-rust finish applied to rotors for long-lasting corrosion protection.
• Track-Ready Pads: High-heat compound maintains performance through aggressive braking cycles; safe for street use after bedding.
• Complete Kit: Includes high-performance brake pads, rotors, and caliper lubricant.
• MPN: S6KF1069

Note: Regular wear monitoring is recommended during track use. This product carries no warranty for dedicated race applications.

Fits select 2008-2023 Infiniti G37, M37, M56, Q50, Q60, Q70 and Nissan 370Z and Z models.

The EBC Brakes S6 Series Brake Pad and Rotor Kit (MPN: S6KF1055) is engineered for the "weekend warrior" who demands high-performance braking on the street and reliable heat management during short track sessions. This direct-fit kit includes premium slotted rotors and ultra-high friction pads designed to bite immediately from a cold start while maintaining stability under intense thermal loads.

The included wide-aperture G3000 iron rotors feature a slotted design that effectively clears dust, debris, and gases from the pad contact surface. To prevent corrosion and maintain a clean appearance behind your wheels, each rotor is treated with a Geomet anti-rust coating. This kit provides a significant performance upgrade over stock setups without requiring any modifications to your factory braking system.

• Direct fit replacement for OEM braking components
• Ultra-high friction pads for street safety and track durability
• G3000 metallurgy wide-aperture slotted rotors
• Geomet anti-rust coating for superior corrosion resistance
• Includes pads, rotors, and high-temp caliper lubricant
• Manufacturer Part Number: S6KF1055

Fits 2006-2008 Chevrolet Corvette (Base, Z06, and 427 Limited Edition Z06).

The EBC Brakes S6 Brake Pad and Rotor Kit (S6KF1053) is engineered for the "weekend warrior," providing a high-performance braking solution for both spirited street driving and short track sessions. This direct-fit kit replaces factory components with ultra-high friction pads and wide-aperture G3000 slotted rotors, designed to manage the high heat generated during aggressive deceleration without sacrificing cold-bite response.

• High-Friction Performance: Pads are designed to provide excellent bite from cold and maintain stable friction levels at high track temperatures.
• G3000 Slotted Rotors: Wide-aperture slots help degas the braking surface and clear debris for consistent pad contact.
• Geomet Coating: Every rotor features an anti-rust finish to prevent corrosion and maintain a clean appearance behind the wheels.
• Direct Fitment: Designed to install directly to factory mounting points with no modifications required.
• Complete Kit: Includes front and rear performance pads (where applicable), G3000 slotted rotors, and caliper lubricant.

Manufacturer Part Number: S6KF1053. For track applications, it is recommended to monitor pad wear every 10 laps to ensure safe operation and sufficient material for the return drive.

The EBC Brakes S6 series kit is a comprehensive performance upgrade designed for the "weekend warrior" who requires a setup capable of handling both daily street driving and occasional track use. This direct-fit kit replaces your factory components with high-friction pads and G3000 wide-aperture slotted rotors, providing a significant increase in thermal capacity and bite without requiring modifications to your stock calipers.

Fits select 2003-2020 Infiniti and Nissan models, including G35, G37, 350Z, 370Z, and M-series sedans.

• Ultra-High Friction Pads: Formulated to work effectively from cold for safe street driving while maintaining performance at high track temperatures.
• G3000 Slotted Rotors: Features wide aperture slots to pull cool air into the braking zone and vent dust, debris, and gases for consistent pedal feel.
• Geomet Anti-Rust Coating: Applied to the rotor surfaces to resist corrosion and maintain a clean appearance.
• Complete Kit: Includes front/rear pads (as per application), slotted rotors, and high-temperature caliper lubricant.
• Direct Fit: Replaces OE components exactly; no changes to the factory hydraulic system or mounting points required.
• Manufacturer Part Number: S6KF1045

Note: For track use, it is critical to monitor pad wear every 10 laps, as high-intensity applications can accelerate friction material consumption.

Fits select 2005-2014 Subaru Forester, Impreza, Legacy, and Outback models. This EBC S6 series kit provides a complete braking upgrade for the "weekend warrior" who demands reliable street performance and short-session track capability. By combining high-friction pads with slotted rotors, this kit eliminates the need for component matching while offering a cost savings over purchasing parts individually.

The included brake pads are engineered for ultra-high friction and heat resistance, maintaining a strong bite from cold starts while resisting fade during high-temperature track use. The wide-aperture G3000 rotors feature a slotted design to vent gases, debris, and heat, ensuring a clean contact patch. Each rotor is finished with a Geomet anti-rust coating to prevent corrosion on non-contact surfaces.

• Manufacturer Part Number: S6KF1041
• High-Friction Pads: Street-safe cold bite with high thermal stability for track use
• Slotted Rotors: G3000 cast iron with wide-aperture slots for superior cooling
• Corrosion Protection: Geomet anti-rust coating on rotor hubs and vanes
• Direct Fit: Designed as a bolt-on replacement for factory braking components
• Kit Includes: Performance brake pads, slotted rotors, and caliper lubricant

Note: Pads must be pre-bedded on the street before track use. Always monitor pad wear every 10 laps during track sessions to ensure sufficient material remains for the drive home.

Fits select 2002-2014 Subaru Impreza, Legacy, and Outback models including WRX, STI, and GT trims.

The EBC Brakes S6 Series Stage 6 kit is an entry-level track day and performance street upgrade designed for the "weekend warrior." This matched set provides a significant boost in stopping power over stock components, offering high-friction pads that bite immediately from cold while maintaining thermal stability under the increased heat of short track sessions. The kit includes EBC pads, G3000 slotted rotors, and caliper lubricant, saving approximately 15% compared to purchasing components individually.

The included rotors are cast from high-strength G3000 metallurgy and feature wide-aperture slots that help degas the braking surface and clear debris. To prevent corrosion in the hub and vane areas, each rotor is finished with a Geomet anti-rust coating. For optimal performance, pads should be pre-bedded on the street before track use. Always monitor pad wear during track sessions, as aggressive driving will increase consumption rates.

• High-Friction Pads: Performance compound works effectively from cold to high track temperatures.
• G3000 Slotted Rotors: Wide-aperture slots reduce brake fade and improve pad-to-rotor contact.
• Geomet Coating: Provides long-lasting resistance against rust and corrosion on non-contact surfaces.
• Direct Fit: Bolts directly to factory mounting points with no modifications required.
• Complete Set: Includes front/rear pads (as per kit spec), rotors, and caliper lubricant.
• Manufacturer Part Number: S6KF1040

Fits 2002-2008 Mitsubishi Lancer models, including Evolution (GSR/MR/RS/SE), Ralliart, ES, LS, and Sportback.

The EBC Brakes S6 Series Kit is a high-performance brake upgrade designed for the "weekend warrior" who requires a balance between street reliability and light track-day capability. This complete kit (S6KF1032) replaces worn factory components with high-friction pads and G3000 slotted rotors, engineered to provide immediate cold bite for safe daily driving while resisting the thermal stress and brake fade common in spirited use.

• High-Friction Pad Compound: Engineered for street and short track sessions; offers excellent bite from cold and maintains performance at elevated temperatures.
• G3000 Slotted Rotors: Wide-aperture slots help expel gases, dust, and debris to maintain consistent pad contact and cooling.
• Geomet Anti-Rust Coating: Applied to all non-friction surfaces of the rotor to prevent corrosion and maintain a clean appearance behind the wheels.
• Complete Installation Kit: Includes high-performance pads, a pair of slotted rotors, and high-temperature caliper lubricant.
• Direct Fit: Designed as a bolt-on replacement for OEM hardware with no modifications required.

Note: For track applications, monitor pad wear every 10 laps to ensure adequate material remains for the return drive. Not warrantied for professional racing use.

Fits select 2009-2017 Buick Regal, Chevrolet Camaro, and Pontiac G8 models. This EBC S6 Brake Pad and Rotor Kit is a performance-matched upgrade designed for the "weekend warrior" who demands high-temperature resistance on the track without sacrificing street driveability. By bundling these components, you save 15% over the cost of purchasing pads and rotors separately.

This kit features wide-aperture G3000 slotted rotors finished with a Geomet anti-rust coating to maintain a clean appearance and resist corrosion. The included ultra-high friction pads provide excellent bite from cold and are engineered to withstand the intense heat of short track sessions. This direct-fit setup requires no modifications to your factory brake system.

• Complete kit includes performance pads, G3000 slotted rotors, and caliper lubricant
• High-friction pads provide reliable cold bite and high-heat durability
• Slotted rotors help degas the pad surface and maintain consistent contact
• Geomet coating provides long-lasting protection against rust
• Direct fitment replaces OEM components with no modifications required
• Manufacturer Part Number: S6KF1030

Fits 2005-2017 Subaru Impreza, WRX, and WRX STI. The EBC S6 Series Brake Pad and Rotor Kit (S6KF1027) is a high-performance upgrade designed for the "weekend warrior" who demands reliable stopping power for both daily street driving and short track sessions. This direct-fit kit replaces your factory setup with no modifications required, offering a significant increase in friction and heat management.

The kit features ultra-high friction pads that provide excellent bite from a cold start while maintaining stability at the elevated temperatures encountered during spirited track driving. These are paired with wide-aperture G3000 slotted rotors, which effectively vent heat, dust, and gases to reduce brake fade. Every rotor is finished with a Geomet anti-rust coating to ensure long-term corrosion resistance on all non-swept surfaces.

• Direct fit for 2005-2017 Subaru Impreza/WRX/STI models
• High-friction track and street pads with superior heat resistance
• Wide-aperture G3000 metallurgy slotted rotors for maximum cooling
• Geomet anti-rust coating prevents corrosion and maintains a clean look
• Includes caliper lubricant for a complete, professional installation
• Manufacturer Part Number: S6KF1027

Note: For track applications, monitor pad wear every 10 laps as accelerated wear occurs under racing conditions. These pads must be properly bedded on the street before track use to ensure maximum performance and safety.

Fits 1989-1996 Nissan 300ZX (Base, 2+2, and Turbo models).

The EBC Brakes S6 Series kit is a matched performance package designed for the "weekend warrior" who needs a vehicle that transitions seamlessly from daily driving to the track. By bundling these components, you save 15% compared to purchasing pads and rotors separately. This kit provides the high-friction bite required for aggressive track-day use while maintaining safe cold-braking performance for the street. The included G3000 wide-aperture slotted rotors help dissipate heat and vent gases during heavy braking, while the Geomet coating ensures long-lasting corrosion resistance.

• Ultra-High Friction: Pads are engineered to withstand high track temperatures without losing bite.
• G3000 Slotted Rotors: Wide aperture slots improve cooling and maintain a clean pad surface.
• Geomet Finish: Specialized anti-rust coating on the rotors for durability and a clean appearance.
• Direct Fit: Replaces factory components with no modifications required to the stock setup.
• Complete Kit: Includes performance pads, slotted rotors, and caliper lubricant.
• MPN: S6KF1024

Note: Always monitor brake pad wear during track sessions. It is recommended to check pads every 10 laps to ensure sufficient material remains for the drive home.

The EBC Brakes S6 Series Pad and Rotor Kit (MPN: S6KF1021) is a high-performance braking upgrade designed for vehicles used on both the street and for short-duration track sessions. By combining high-friction pads with precision-machined G3000 slotted rotors, this kit provides a significant performance increase over factory components while offering a 15% cost savings compared to purchasing parts individually.

The included wide-aperture rotors are cast from G3000-grade iron and feature a Geomet anti-rust coating to ensure long-term corrosion resistance. The slotted design effectively vents heat, gases, and dust, maintaining a clean pad surface for consistent stopping power. The ultra-high friction pads are formulated to deliver immediate cold bite for safe street driving while resisting fade under high-temperature track conditions.

• Direct fit replacement for OE components with no modifications required
• Wide-aperture G3000 slotted rotors for superior thermal management
• Geomet anti-rust coating protects non-contact surfaces from corrosion
• High-friction pads provide excellent cold bite and track-ready heat resistance
• Includes high-quality caliper lubricant for proper installation
• Manufacturer Part Number: S6KF1021

Always monitor brake pad wear during track use, especially when driving consecutive laps. This kit is designed for dual-purpose use; however, no warranty is provided for dedicated racing applications.

Fits 1984-2004 Cadillac XLR and Chevrolet Corvette (Select V8 models).

The EBC Brakes S6KF1017 kit is a high-performance brake upgrade engineered for the "weekend warrior" who requires a reliable setup for both spirited street driving and short track sessions. This kit combines EBC Yellowstuff high-friction pads with wide-aperture G3000 slotted rotors, providing a significant increase in stopping power and thermal management over stock components. Purchasing this pre-matched kit offers a 15% savings compared to buying pads and rotors separately.

• Yellowstuff Friction Pads: Ultra-high friction track day and street pads that provide excellent bite from cold and maintain performance under high-temperature track conditions.
• G3000 Slotted Rotors: Wide-aperture slots help expel brake dust and gases while drawing cool air into the contact zone to prevent thermal fade.
• Geomet Anti-Rust Coating: A durable protective finish applied to the rotors to prevent corrosion on non-contact surfaces.
• Direct Fitment: Designed as a bolt-on replacement for factory hardware with no modifications required for installation.
• Complete Kit: Includes a full set of pads, slotted rotors, and high-performance caliper lubricant.

Note: For track applications, monitor pad wear every 10 laps to ensure safe operation. These pads should be properly bedded on the street before track use to maximize friction surface contact and longevity.

Fits select 1994-2004 Ford Mustang models, including Base, GT, Mach 1, and SVT Cobra. This EBC S6 Series brake kit (MPN S6KF1008) is an engineered solution for the "weekend warrior," designed to bridge the gap between street driving and track day performance.

The kit features ultra-high friction pads that provide excellent cold bite while maintaining thermal stability under harsh braking conditions. Paired with G3000 wide-aperture slotted rotors, this setup effectively dissipates heat and gasses, reducing brake fade during short track sessions. Each rotor is finished with a Geomet anti-rust coating to maintain a clean appearance and resist corrosion on non-swept surfaces.

• Ultra-High Friction Pads: Designed for high heat resistance and consistent bite from cold to track temperatures.
• G3000 Slotted Rotors: Wide-aperture slots draw cool air under the pad face and expel dust, debris, and gases.
• Geomet Coating: Specialized anti-rust finish for superior corrosion resistance.
• Direct Fit: Replaces factory components with no modifications required to the stock caliper or spindle.
• What's Included: Front brake pads, slotted rotors, and high-temperature caliper lubricant.

Note: Pads require pre-bedding on the street before track use. Always monitor pad wear every 10 laps on track, as abrasive racing environments accelerate wear rates.

Fits 2003-2017 Dodge and SRT Viper (All models including SRT-10, ACR, GTS, and GT).

The EBC S6 Brake Pad and Rotor Kit (MPN: S6KF1004) is engineered as a "weekend warrior" solution for high-performance street use and occasional track days. This direct-fit kit replaces your factory setup without modifications, providing ultra-high friction pads that bite effectively from a cold start while maintaining thermal integrity under high-heat track conditions. The package is anchored by wide-aperture G3000 slotted rotors, which are designed to degas and cool the braking surface during aggressive use.

• Direct-fit installation requires no changes over the stock braking setup.
• Wide-aperture G3000 slotted rotors for maximum heat dissipation and debris clearance.
• Geomet anti-rust coating on rotor surfaces for long-term corrosion resistance.
• Ultra-high friction track/street pads provide consistent performance from cold to high temps.
• Comprehensive kit includes pads, rotors, and caliper lubricant.

Safety note: For track applications, monitor pad wear every 10 laps. Track use typically accelerates wear; ensure sufficient friction material remains for safe transit following track sessions. Manufacturer provides no warranty for dedicated racing use.

Fits select 2019-2026 Ram 1500 and 2022-2023 Jeep Wagoneer and Grand Wagoneer models.

The EBC S5 Brake Pad and Rotor Kit (S5KR1771) is a high-efficiency sport upgrade designed for trucks, SUVs, and high-horsepower street vehicles. This kit combines EBC's flagship Yellowstuff high-friction pads with GD series wide-aperture slotted rotors to provide maximum braking effect and improved thermal management under heavy use.

The included Yellowstuff pads are GG-rated for high friction and feature factory-style shims, chamfers, and slots to minimize noise. Each pad is finished with a patented EBC Brake-in coating to accelerate the seating process. Paired with G3000 slotted rotors, this setup effectively removes dust, gas, and debris while maintaining cooler operating temperatures.

• Direct fit replacement for factory brake components; no modifications required.
• Yellowstuff high-friction pads provide maximum stopping power for street and light truck applications.
• GD series rotors feature wide-aperture slots and dimples for superior cooling.
• Geomet anti-rust coating protects rotors from corrosion and maintains a clean look.
• Includes pads, rotors, and caliper lubricant for a complete installation.
• Manufacturer Part Number: S5KR1771
• Warranty: 10,000 Mile No Hassle Warranty

Fits select 2019-2026 Cadillac Escalade/ESV, Chevrolet Silverado 1500, Suburban, Tahoe, and GMC Sierra 1500, Yukon, and Yukon XL models.

The EBC S5 Brake Pad and Rotor Kit (S5KR1753) is a high-performance sport upgrade designed for heavy-duty applications, including light trucks, SUVs, and high-horsepower street cars. This kit combines EBC flagship Yellowstuff pads with GD series wide-aperture rotors to deliver maximum braking effect and superior heat dissipation compared to factory setups.

• Yellowstuff High-Friction Pads: GG-rated pads that are fully shimmed, chamfered, and slotted to minimize noise. Features a patented EBC Brake-In coating for accelerated pad seating right out of the box.
• GD Series Sport Rotors: Wide-aperture and spot-drilled vented sport rotors made from G3000 cast iron. Designed to run cooler and rapidly expel dust, gas, and debris.
• Anti-Rust Finish: Rotors are treated with a Geomet anti-rust coating to protect against corrosion and maintain a professional appearance.
• Direct Fit Installation: Replaces OE components exactly with no modifications required for a hassle-free setup.
• Hardware Included: Comes as a complete kit including brake pads, rotors, and high-quality caliper lubricant.

Each kit is backed by a 10,000-mile no-hassle manufacturer warranty.

Fits 2018-2026 Kia Stinger and Genesis G70 models. This EBC Brakes S5 Series kit is a high-efficiency sport upgrade designed for fast street cars, SUVs, and light trucks, providing a significant increase in stopping power over factory components.

The kit features EBC Yellowstuff high-friction pads, known for their excellent cold bite and resistance to brake fade under heavy use. These pads include the patented EBC Brake-in™ coating to accelerate the bedding-in process. Paired with these are wide-aperture G3000 slotted rotors, which effectively vent heat, gases, and debris to maintain consistent contact between the pad and rotor surface. To ensure longevity and aesthetics, the rotors are finished with a Geomet thermic anti-rust coating and are fully balanced and run-out tested for smooth, vibration-free operation.

• Direct fit replacement for stock braking systems; no modifications required
• High-friction Yellowstuff pads for improved deceleration and fade resistance
• Wide-aperture G3000 slotted rotors for superior cooling and degassing
• Geomet thermic anti-rust coating for corrosion protection
• Fully balanced and run-out tested for smooth braking performance
• Includes a 10,000-mile no-hassle manufacturer warranty
• Manufacturer Part Number: S5KR1748

Fits 2016-2023 Honda Civic EX, EX-L, EX-T, LX, LX-P, Si, Sport, Sport Touring, Touring, and Type R.

The EBC Brakes S5 Kit (S5KR1740) is a high-efficiency performance upgrade designed for spirited street use, SUVs, and light trucks. This kit combines EBC’s flagship Yellowstuff high-friction pads with wide-aperture G3000 slotted rotors to provide a significant increase in stopping power and thermal capacity over stock components. Every rotor is fully balanced and run-out tested to ensure smooth, vibration-free braking under heavy loads.

• Yellowstuff High-Friction Pads: Formulated for superior cold bite and heat resistance, featuring a patented Brake-in coating for rapid bedding after installation.
• Wide-Aperture G3000 Slotted Rotors: Cast from premium G3000 iron and slotted to pull cool air into the braking zone while expelling dust, debris, and gasses for consistent pedal feel.
• Corrosion Resistance: Rotors are finished with a Geomet thermic anti-rust coating to prevent surface oxidation.
• Direct Fit Installation: Replaces factory components with no modifications required.
• Manufacturer Part Number: S5KR1740
• Warranty: Covered by a 10,000-mile no-hassle manufacturer warranty.

Fits 2018-2026 Honda Accord models, including Hybrid, Sport, EX, LX, and Touring trims.

The EBC Brakes S5 Brake Pad and Rotor Kit (MPN: S5KR1735) is a high-efficiency sport upgrade designed for drivers seeking improved stopping power and thermal management. This direct-fit kit replaces your factory setup with precision-engineered components that require no modifications for installation. By combining high-friction Yellowstuff pads with wide-aperture G3000 slotted rotors, this kit provides consistent performance for fast street use and heavier SUV or truck applications.

• Yellowstuff High-Friction Pads: Features EBC's patented Brake-in coating for faster bed-in and immediate bite.
• Wide-Aperture G3000 Slotted Rotors: Designed to vent gases, dust, and debris while maintaining cooler operating temperatures.
• Corrosion Protection: Rotors are finished with a Geomet thermic anti-rust coating to prevent oxidation and maintain a clean appearance.
• Precision Engineering: Each rotor is fully balanced and run-out tested to ensure smooth, vibration-free braking.
• Manufacturer Part Number: S5KR1735
• Warranty: 10,000-mile no-hassle manufacturer warranty.

Fits select 2017-2020 Audi A4, A4 allroad, A5 Quattro, and Q5.

The EBC Brakes S5 Series Kit provides a complete braking upgrade by matching high-friction Yellowstuff pads with G3000 performance rotors. This kit is engineered for fast street use and light truck/SUV applications, offering a significant increase in stopping power and thermal management over factory components. Each rotor is fully balanced and run-out tested to ensure smooth, vibration-free operation from the moment of installation.

• Yellowstuff High-Friction Pads: Features a race-derived compound that maintains a high friction coefficient even under heavy load and heat.
• Brake-in™ Coating: Patented surface coating on the pads ensures rapid bed-in for immediate braking performance.
• Dimpled and Slotted Rotors: Cast from G3000-grade iron to improve cooling and expel brake gases, preventing surface glazing and brake fade.
• Geomet Corrosion Protection: Rotors are finished with a thermic Geomet anti-rust coating to maintain a clean look and prevent oxidation.
• Direct Replacement: Designed to install directly into factory positions without modifications.
• Part Number: S5KR1728

Fits 2015-2023 Mini Cooper models including Base, S, SE, John Cooper Works, and Roadster/Coupe variants.

The EBC Brakes S5KR1725 kit is a high-performance braking solution designed for fast street use and heavy-duty applications. This comprehensive kit combines EBC Yellowstuff high-friction pads with dimpled and slotted G3000-grade rotors to provide significantly improved stopping power and heat dissipation over factory components. Each rotor is precision-balanced and run-out tested to ensure smooth, vibration-free operation.

• Yellowstuff High-Friction Pads: Engineered for fast street use, featuring a high-coefficient friction material and a patented Brake-in™ coating for accelerated pad bedding.
• G3000 Performance Rotors: Constructed from premium G3000 performance iron with a dimpled and slotted design that clears debris and maintains cooler operating temperatures.
• Geomet Anti-Rust Coating: Rotors feature a thermic Geomet finish to resist corrosion and maintain a clean appearance.
• Complete Axle Set: Includes all pads and rotors required for a full axle upgrade, providing a cost-effective alternative to purchasing components separately.
• MPN: S5KR1725

Fits 2014-2023 Mini Cooper (Base, S, SE, John Cooper Works, Coupe, and Roadster). This EBC Brakes S5 kit is an engineered upgrade for fast street drivers and enthusiasts seeking significant improvements in stopping power and thermal management. By pairing high-friction Yellowstuff pads with dimpled and slotted G3000 performance rotors, this kit addresses the brake fade and heat soak common during spirited driving or with heavier vehicle loads.

The Yellowstuff pads feature the patented EBC Brake-In coating for rapid bedding and superior cold-to-hot friction levels. The G3000 rotors are precision-balanced and run-out tested to ensure vibration-free performance. Each rotor is finished with a thermic Geomet anti-rust coating, protecting the non-contact surfaces from corrosion for a clean look through your wheels.

• Yellowstuff high-friction pads for maximum stopping power
• Dimpled and slotted rotors help degas and maintain clean pad surfaces
• G3000 cast iron construction for durability and heat stability
• Geomet anti-corrosion coating prevents rust buildup
• Patented Brake-In coating for faster pad-to-rotor seating
• Direct-fit replacement for factory braking components
• Manufacturer Part Number: S5KR1724

Fits select 2016-2020 Audi Q3 and Volkswagen Golf models.

The EBC Brakes S5 series brake kit is an engineered upgrade designed specifically for fast street cars, light trucks, and SUVs. This comprehensive kit (MPN: S5KR1723) pairs EBC Yellowstuff high-friction pads with G3000 performance rotors, delivering a significant increase in stopping power and thermal capacity over factory components. The rotors are precision-machined, fully balanced, and run-out tested to ensure vibration-free operation from the first mile.

• Yellowstuff High Friction Pads: Formulated for high-temperature performance with a patented Brake-in surface coating for rapid bedding.
• G3000 Performance Rotors: Dimpled and slotted design to vent gasses, maintain pad flatness, and prevent glazing under hard braking.
• Geomet Coating: Provides a durable, thermic anti-rust barrier on all non-contact surfaces to prevent corrosion and maintain a clean appearance.
• Complete Set: Includes matched pads and rotors for a 10% savings compared to purchasing parts separately.