Fits select 2010-2023 Lexus GS460, GX460, and Toyota 4Runner.

The EBC Brakes S3 Series kit is a complete performance upgrade designed specifically for SUVs and light trucks that require reliable stopping power for daily driving and light towing. This direct-fit kit replaces your worn OE components with high-efficiency pads and wide-aperture slotted sport rotors to improve thermal management and friction levels.

The included brake pads are engineered with an Aramid fiber compound that is fully shimmed, slotted, and chamfered for quiet, vibration-free operation. They feature EBC’s patented Brake-in coating to ensure rapid pad seating immediately after installation. To complement the pads, the G3000 sport vented rotors utilize wide aperture slots to draw cool air into the contact patch while clearing dust and debris. Each rotor is finished with a Geomet anti-rust coating to maintain structural integrity and a clean appearance.

• Direct fit replacement for factory components with no modifications required
• High-efficiency Aramid fiber pads for improved stopping over OE materials
• Wide aperture slotted G3000 sport vented rotors for maximum cooling
• Geomet anti-rust coating protects against corrosion and road grime
• Patented Brake-in coating for faster pad-to-rotor bedding
• Includes brake pads, rotors, and high-temperature caliper lubricant
• Manufacturer Part Number: S3KF1130
• Includes 10,000-mile no-hassle warranty

Fits 2003-2009 Lexus GX470 and Toyota 4Runner (Limited, Sport, SR5).

The EBC S3 Brake Pad and Rotor Kit (S3KF1129) is a direct-fit performance upgrade designed specifically for SUVs and light trucks used in daily driving or moderate towing. This kit replaces worn OE components with high-efficiency Aramid fiber pads and G3000 sport rotors, providing cooler operating temperatures and consistent pad wear.

• High-Efficiency Pads: Fully shimmed, slotted, and chamfered Aramid fiber pads featuring EBC's patented Brake-in coating for faster seating and immediate performance.
• Sport-Vented Rotors: G3000 cast iron rotors with wide-aperture slots and spot drilling to draw cool air under the braking surface while clearing dust and debris.
• Anti-Corrosion Finish: Rotors are treated with a Geomet anti-rust coating to ensure long-term durability and a clean look behind your wheels.
• Complete Installation: Includes a matched set of pads and rotors plus caliper lubricant for a seamless maintenance upgrade.

• Manufacturer Part Number: S3KF1129
• Rotor Style: Wide Aperture Slotted and Spot Drilled
• Pad Material: Aramid Fiber
• Warranty: 10,000-Mile No-Hassle Warranty

Fits select 2003-2023 Toyota 4Runner, FJ Cruiser, and Tacoma.

The EBC Brakes S3 Brake Pad and Rotor Kit (S3KF1128) is an engineered upgrade designed for SUVs and light trucks that require improved stopping power over original equipment. This kit combines high-friction aramid fiber pads with G3000 wide-aperture slotted and spot-drilled sport rotors to better handle the thermal demands of moderate towing and daily truck use.

• High-Efficiency Aramid Pads: These pads are fully shimmed, slotted, and chamfered to minimize noise. They feature EBC's patented Brake-in coating to ensure rapid pad seating immediately after installation.
• G3000 Sport Rotors: These vented rotors utilize wide-aperture slots to draw cool air into the braking contact zone while clearing dirt, dust, and debris faster than standard rotors.
• Geomet Anti-Rust Coating: The rotors are finished with a Geomet coating to prevent corrosion and maintain a clean appearance behind your wheels.
• Direct Fit Installation: This kit is a direct bolt-on replacement for factory components, requiring no modifications to the stock brake system.
• Manufacturer Warranty: Includes a 10,000-mile no-hassle warranty for peace of mind.

What's Included: EBC aramid fiber brake pads, G3000 wide-aperture sport rotors, and high-quality caliper lubricant.

Fits 2000-2007 Toyota Sequoia and Tundra models. The EBC Brakes S3 Series Brake Pad and Rotor Kit is an engineered upgrade designed for SUVs and light trucks that require improved stopping power over original equipment. This complete kit provides a significant performance boost for moderate towing and daily driving by replacing worn factory components with high-performance materials.

The kit features EBC Greenstuff 6000 series pads, constructed from high-efficiency Aramid fiber. These pads are fully shimmed, slotted, and chamfered to minimize vibration and are finished with the patented Brake-in™ surface coating for immediate bedding after installation. Paired with G3000 sport rotors, this system utilizes wide-aperture slots and spot drilling to draw cool air into the braking area while effectively clearing dust, dirt, and gases.

• G3000 Sport Rotors: Vented design with wide-aperture slots for cooler operation and consistent pad contact.
• Geomet® Anti-Rust Finish: Provides long-lasting corrosion resistance on all non-contact rotor surfaces.
• High-Friction Aramid Pads: Specifically formulated for the weight and heat requirements of trucks and SUVs.
• Direct OE Replacement: Precision-fit components that require no modifications to the factory braking system.
• Included Components: Set of brake pads, a pair of sport rotors, and high-temperature caliper lubricant.
• Manufacturer Part Number: S3KF1127

Fits 2005-2006 Honda CR-V EX, LX, and SE models.

The EBC Brakes S3 Stage 3 Brake Pad and Rotor Kit is a direct-fit performance upgrade designed for daily drivers and moderately upgraded SUVs. This kit replaces your factory components with a precision-matched combination of Ultimax brake pads and wide-aperture slotted G3000 sport rotors, providing increased stopping power and thermal management without requiring modifications to your stock braking system.

The included Ultimax pads are manufactured in the UK and feature a premium ECE R 90 approved compound. This blend uses a low-volume steel fiber matrix to deliver consistent friction and a high-confidence pedal feel while remaining gentle on rotors. To complement the pads, the G3000 sport rotors feature wide-aperture slots that effectively clear dust, debris, and gases from the contact patch, maintaining optimal pad-to-rotor engagement during light towing or spirited daily use. Each rotor is finished with a Geomet anti-rust coating to ensure lasting corrosion resistance and a clean appearance.

• Complete front or rear kit (varies by MPN) including pads and rotors
• Wide-aperture slotted G3000 iron rotors for superior cooling and debris clearing
• Ultimax R 90 approved brake pads for low-dust, quiet daily operation
• Geomet protective coating prevents rust on non-contact rotor surfaces
• Direct fitment to OEM calipers and mounting points
• Manufacturer Part Number: S3KF1126
• 10,000-mile no-hassle manufacturer warranty

Fits 2002-2004 Honda CR-V and 2003-2011 Honda Element models. This EBC S3 kit provides a significant braking upgrade for SUVs and light trucks used for daily driving or moderate towing. This matched set includes high-efficiency Greenstuff pads and GD series sport rotors to improve stopping power and thermal management over original equipment.

The included brake pads are manufactured from a high-friction aramid fiber compound. They are fully shimmed, slotted, and chamfered to reduce noise, and feature EBC’s patented Brake-in™ coating to accelerate the bedding-in process. These are paired with G3000 sport rotors, which feature wide-aperture slots and blind-drilled dimples to pull cool air under the pad surface while venting dust, dirt, and gases. Finished with a Geomet anti-rust coating, these rotors maintain a clean appearance and resist corrosion.

• Part Number: S3KF1125
• Pad Material: High-efficiency Aramid fiber Greenstuff pads
• Rotor Style: GD Series wide-aperture slotted and dimpled sport rotors
• Finish: Geomet anti-rust coating for long-term corrosion resistance
• Fitment Type: Direct replacement; bolts to factory calipers and mounting points
• Warranty: 10,000-mile limited manufacturer warranty

Fits 2003-2008 Honda Pilot (EX, EX-L, LX, Special Edition, and Value Package).

The EBC S3 Brake Pad and Rotor Kit (S3KF1124) is a performance-oriented replacement for SUVs and light trucks, providing improved stopping power and heat dissipation over factory components. This comprehensive kit includes high-efficiency Aramid fiber brake pads, G3000 sport rotors, and caliper lubricant for a complete installation.

The included brake pads are fully shimmed, slotted, and chamfered to reduce noise. They feature EBC's patented Brake-in™ coating, which accelerates the seating process for immediate performance. The GD series rotors are cast from G3000 iron and feature wide-aperture slots that draw cool air into the braking zone while clearing dust and debris. Each rotor is finished with a Geomet anti-rust coating to maintain appearance and prevent corrosion on non-contact surfaces.

• Direct fit replacement; requires no modifications to the stock setup
• High-friction Aramid fiber pads for improved truck and SUV braking
• G3000 sport vented rotors with wide-aperture slots and spot drilling
• Geomet anti-corrosion finish for lasting durability
• Includes pads, rotors, and caliper lubricant
• Manufacturer Part Number: S3KF1124
• 10,000-mile no-hassle warranty

Fits select 2003-2011 Dodge and Ram 1500, 2500, and 3500 trucks (including TRX, TRX4, Power Wagon, and SRT-10 models). This EBC Brakes S3 kit is a direct-fit upgrade designed for light trucks and SUVs that require improved stopping power for normal street driving or moderate towing. This matched kit provides a 15% cost savings over purchasing components individually.

The kit features EBC high-efficiency pads manufactured with aramid fiber. These pads are fully shimmed, slotted, and chamfered to reduce noise and incorporate the patented Brake-In™ coating to accelerate the bed-in process. The included sport rotors are cast from G3000 iron and feature wide aperture slots and spot drilling to draw cool air into the braking area while effectively clearing dust, gas, and debris. All rotors are finished with a Geomet anti-rust coating to ensure long-term corrosion resistance and a clean appearance.

• Improved Performance: Designed to offer a significant upgrade over OE pads for better thermal management.
• Advanced Rotor Design: Wide aperture slots and spot drilling maintain flat, parallel pad wear and lower operating temperatures.
• Corrosion Protection: Geomet coating on rotors prevents rust on non-contact surfaces.
• Installation Ready: Direct fit replacement with no modifications required; includes caliper lubricant.
• MPN: S3KF1122
• Warranty: 10,000-mile no-hassle manufacturer warranty.

Fits 2002-2005 Dodge Ram 1500 and 2004-2006 Dodge Durango.

The EBC Brakes S3 Brake Pad and Rotor Kit (S3KF1119) provides a significant performance upgrade over factory components for SUVs and light trucks used for daily driving and moderate towing. This matched set includes EBC Greenstuff pads and GD series wide-aperture slotted sport rotors to improve thermal management and pedal feel without requiring any vehicle modifications.

• High-Friction Greenstuff Pads: Formulated with Aramid fiber for superior heat resistance. These pads are fully shimmed, slotted, and chamfered for quiet operation and include the EBC patented Brake-In™ coating for immediate seating after installation.
• G3000 Sport Rotors: Vented rotors cast from G3000 iron featuring wide-aperture slots and spot drilling. This design draws cool air into the braking area while effectively clearing dust, gas, and debris for a cleaner pad-to-rotor contact patch.
• Corrosion Protection: Rotors are finished with a Geomet anti-rust coating to maintain a clean appearance and prevent surface oxidation.
• Installation Ready: A direct-fit bolt-on kit that replaces OE hardware using factory mounting points. Includes caliper lubricant for a complete service.

Specifications: Part Number S3KF1119; includes 10,000-mile manufacturer warranty.

Fits 2000-2002 Toyota Tundra and 2001-2002 Toyota Sequoia (Base, Limited, and SR5 models).

The EBC Brakes S3 kit is a high-performance brake upgrade specifically engineered for the demands of light trucks and SUVs. This comprehensive package replaces your factory components with high-efficiency Aramid fiber pads and wide-aperture sport rotors, providing improved thermal management and stopping power for daily driving and light towing.

• Greenstuff 6000 Series Pads: Features high-friction Aramid fiber construction that is fully shimmed, slotted, and chamfered for quiet, reliable performance.
• Brake-In™ Coating: Includes EBC's patented red surface coating to accelerate pad seating and ensure optimal friction immediately after installation.
• GD Sport Rotors: Precision-cast G3000 iron rotors with wide-aperture slots and blind-drilled dimples to pull cool air into the braking zone while venting dust, dirt, and gases.
• Corrosion Protection: Finished with a silver Geomet anti-rust coating to maintain a clean appearance and prevent rotor seizure.
• Direct Fit: Designed as a bolt-on replacement for OE hardware with no modifications required to the factory calipers or mounting points.
• Complete Kit: Includes front brake pads, two sport rotors, and specialized caliper lubricant.
• Manufacturer Part Number: S3KF1089

Fits select 1999-2005 Ford F-250, F-250 Super Duty, F-350 Super Duty, and Excursion models. This EBC S3 kit is specifically engineered for SUV and light truck owners seeking improved stopping power for daily driving and moderate towing without moving to a full racing setup.

This comprehensive kit pairs high-efficiency EBC brake pads with wide-aperture G3000 sport rotors. The pads are manufactured with an aramid fiber compound that provides superior heat management and bite over factory equipment. Each pad is fully shimmed, slotted, and chamfered to minimize noise and features the EBC patented Brake-in™ coating to accelerate the bedding-in process immediately after installation.

The included sport rotors are cast from G3000 iron and feature wide-aperture slots that pull cool air into the braking zone while effectively clearing dust, debris, and gases. Finished with a Geomet anti-rust coating, these vented rotors maintain a clean appearance and resist corrosion in harsh environments.

• Direct-fit replacement for factory braking components with no modifications required
• Aramid fiber brake pads for enhanced stopping power and thermal stability
• Wide-aperture slotted G3000 sport rotors for improved cooling and pad degassing
• Geomet anti-rust finish on rotors for long-term corrosion resistance
• Includes caliper lubricant and all necessary hardware for installation
• Manufacturer Part Number: S3KF1081
• 10,000-mile no-hassle manufacturer warranty

Fits select 2001-2020 Chevrolet Express 3500, Silverado 2500/HD, and GMC Sierra 2500/3500/HD models.

The EBC Brakes S3 Brake Pad and Rotor Kit (S3KF1077) provides a significant performance upgrade for light trucks and SUVs used for daily driving and moderate towing. This kit replaces worn factory components with high-efficiency Aramid fiber pads and G3000 sport vented rotors, designed to handle higher heat loads and maintain a flat, parallel pad wear surface throughout their lifespan.

The included brake pads are fully shimmed, slotted, and chamfered to minimize noise and vibration. They feature EBC's patented Brake-in coating, which accelerates the bed-in process for immediate stopping power after installation. The G3000 rotors utilize wide-aperture slots and spot drilling to draw cool air into the braking area while effectively clearing dust, gas, and debris. Each rotor is finished with a Geomet anti-rust coating to ensure long-term corrosion resistance.

• Direct-Fit Installation: Engineered to bolt directly to stock mounting points with no modifications needed.
• Aramid Fiber Compound: High-friction pad material for improved thermal stability over OE alternatives.
• Advanced Rotor Cooling: Wide-aperture slots and sport venting for reduced brake fade.
• Corrosion Protection: Geomet anti-rust finish maintains appearance and functionality in harsh environments.
• Complete Kit: Includes pads, rotors, and specialized caliper lubricant.

• Manufacturer Part Number: S3KF1077
• Rotor Material: G3000 Sport Grade Iron
• Warranty: 10,000-Mile No-Hassle Warranty
• Fitment Type: Vehicle Specific

Fits select 1999-2022 Chevrolet Silverado, Express, Suburban, Avalanche, GMC Sierra, Savana, Yukon XL, and Hummer H2.

The EBC S3 Brake Pad and Rotor Kit provides a technical performance upgrade for trucks and SUVs involved in light towing or spirited street use. This kit (MPN S3KF1076) is engineered to replace worn OE components with higher-friction materials and improved thermal management, reducing brake fade under load. The included high-efficiency pads are constructed from aramid fiber and are fully shimmed, slotted, and chamfered for quiet operation and consistent pedal feel.

The matched GD sport rotors are cast from G3000 iron and feature a vented design with wide-aperture slots and spot drilling. This geometry effectively draws cool air into the braking contact zone while clearing dust, gases, and debris to maintain a flat, parallel pad wear surface. Every rotor is finished with a Geomet anti-rust coating to ensure long-term corrosion resistance.

• Direct fit replacement; no modifications to the factory setup required
• Aramid fiber pads with EBC patented Brake-in coating for rapid bed-in
• G3000 sport vented rotors with wide-aperture slots for superior cooling
• Geomet anti-rust finish for corrosion protection on all non-contact surfaces
• Includes high-quality caliper lubricant
• Manufacturer Part Number: S3KF1076
• 10,000-mile manufacturer no-hassle warranty

Fits select 1999-2009 Cadillac Escalade, Chevrolet Silverado, Tahoe, Suburban, and GMC Sierra, Yukon trucks and SUVs. This EBC S3 Sport Brake Pad and Rotor Kit is a matched component upgrade designed for light trucks and SUVs that require better-than-OE stopping power for daily driving and light towing. By bundling the pads and rotors together, this kit offers a significant cost saving compared to purchasing components separately.

The kit features EBC Greenstuff 6000 Series pads, constructed from a high-friction Aramid fiber compound. These pads are fully shimmed, slotted, and chamfered to reduce noise and vibration. They include the patented EBC Brake-In coating to accelerate the bedding process immediately after installation. Paired with these are EBC GD Series sport rotors, cast from G3000 iron. The wide-aperture slots and spot-drilled dimples pull cool air across the braking surface while clearing dust and debris to prevent thermal fade and maintain a flat pad contact surface.

• Manufacturer Part Number: S3KF1075
• Rotor Material: G3000 sport-spec iron with Geomet anti-rust finish
• Pad Material: Aramid fiber high-friction compound
• Rotor Style: Wide-aperture slotted and spot-drilled (dimpled)
• Direct fitment to factory calipers and mounting points
• Includes high-temperature caliper lubricant
• Warranty: 10,000-mile no-hassle manufacturer warranty

Fits select 1990-2002 Chevrolet Suburban 1500, Tahoe and GMC Safari, Yukon. This EBC Brakes S3 Series Brake Pad and Rotor Kit (MPN: S3KF1063) is a direct-fit upgrade designed for light trucks and SUVs used for daily commuting and moderate towing. This kit provides a complete solution for replacing worn factory components while improving stopping power and thermal management.

• High-Efficiency Aramid Pads: Engineered with aramid fiber for enhanced friction, these pads come fully shimmed, slotted, and chamfered to minimize noise. They feature EBC’s patented Brake-in coating for rapid pad seating during the initial break-in period.
• G3000 Sport Rotors: These wide-aperture slotted and spot-drilled vented rotors are cast from G3000 iron. The slot design actively pulls cool air into the friction zone while clearing dust, dirt, and gases to maintain parallel pad wear.
• Geomet Protection: All rotors are finished with a Geomet anti-rust coating to prevent corrosion on non-contact surfaces.
• Complete Hardware: Includes high-efficiency pads, vented sport rotors, and caliper lubricant for a comprehensive installation.
• Warranty: Covered by a 10,000-mile no-hassle manufacturer warranty.

Fits select 1975-1993 Ford F-150, F-100, and Bronco models.

The EBC S3 Brake Pad and Rotor Kit is an engineered upgrade designed for light trucks and SUVs that require more reliable stopping power for daily driving and light towing. This direct-fit kit replaces worn OE components with high-performance materials, combining EBC’s aramid fiber pads with G3000-spec sport rotors to significantly reduce brake fade and maintain a consistent friction surface.

• High-Efficiency Pads: Constructed with aramid fiber, these pads are fully shimmed, slotted, and chamfered to minimize vibration and noise.
• Brake-In Coating: Features EBC’s patented coating to accelerate pad seating and ensure optimal performance immediately after installation.
• G3000 Sport Rotors: Vented rotors cast from G3000 metallurgy, featuring wide aperture slots and spot drilling to draw cool air into the braking zone.
• Debris Management: The slotted design helps evacuate dust, dirt, and gases from the contact area for a more responsive pedal feel.
• Corrosion Protection: Finished with a Geomet anti-rust coating to maintain appearance and prevent oxidation on non-friction surfaces.
• Complete Installation: Includes front pads, sport rotors, and caliper lubricant; bolts directly to factory locations with no modifications needed.

Manufacturer Part Number: S3KF1040

Fits select 2018-2026 Genesis G70 and Kia Stinger models. This EBC S10 brake kit is a matched performance upgrade designed for sport sedans and spirited street driving, providing a significant increase in stopping power over original equipment.

The kit features EBC Greenstuff 2000 series pads, a high-friction compound that delivers improved initial bite while emitting less dust than standard pads. Each pad includes the EBC Brake-In surface coating to accelerate the bedding process for immediate performance. Paired with these are the G3000 Sport Rotors, cast with wide aperture slots to pull cool air into the braking contact zone and expel heat, gas, and debris. To ensure long-term durability and aesthetics, the rotors are finished with a Geomet anti-rust coating.

• Includes Greenstuff 2000 series high-friction pads for superior pedal feel
• G3000 sport rotors with wide aperture slots for improved cooling
• Geomet coating protects against corrosion and rust
• Direct replacement for factory braking components
• Manufacturer Part Number: S10KR1463

Fits select 2017-2020 Audi A4, A4 allroad, A5 Quattro, and Q5.

The EBC Brakes S10 Brake Pad and Rotor Kit (S10KR1448) is a performance-matched upgrade engineered to deliver a significant improvement over factory braking systems. Ideal for spirited driving and performance compacts, this kit combines high-efficiency EBC pads with wide-aperture slotted G3000 sport rotors. Every rotor is fully balanced and run-out tested to ensure smooth, vibration-free deceleration from the first stop.

• G3000 Sport Rotors: Precision-machined with wide aperture slots that draw cool air into the braking contact zone while venting dust, gases, and debris.
• Anti-Rust Protection: Rotors feature a Geomet thermic coating to resist corrosion and maintain a clean appearance behind your wheels.
• Brake-In Coating: EBC’s patented pad surface coating ensures rapid bedding-in and immediate stopping power right after installation.
• Complete Performance Set: This kit includes both pads and rotors, offering a 10% cost saving over purchasing components separately.

Includes: Set of EBC high-efficiency brake pads and a pair of slotted G3000 sport rotors (MPN: S10KR1448).

Fits 2015-2023 Mini Cooper and Cooper Clubman models (Base, S, JCW, SE, ALL4). See the fitment table below for specific submodel compatibility.

The EBC Brakes S10 Brake Pad and Rotor Kit is an engineered performance upgrade designed for spirited driving and fast compacts. This matched kit combines EBC high-efficiency pads with wide aperture slotted sport rotors to deliver a significant improvement in stopping power over original equipment components. The rotors are cast from G3000 metallurgy, fully balanced, and run-out tested to ensure smooth, vibration-free braking performance.

• High-Efficiency Pads: Features a patented Brake-in coating to accelerate the bedding-in process for immediate performance.
• G3000 Sport Rotors: Wide aperture slots help clear debris and gases, maintaining cooler operating temperatures.
• Corrosion Protection: Rotors are finished with a Geomet thermic anti-rust coating to maintain a clean appearance and resist environmental wear.
• Complete Axle Kit: Includes a matched set of pads and rotors for a streamlined installation and optimized friction pairing.
• MPN: S10KR1446

Fits 2014-2023 Mini Cooper models including Base, Coupe, Roadster, JCW, S, and SE.

The EBC Brakes S10 Brake Pad and Rotor Kit (MPN S10KR1445) is a precision-matched performance upgrade designed to replace worn factory components while significantly improving stopping power. Engineered for spirited daily driving and fast compacts, this kit bundles EBC’s high-efficiency friction material with wide-aperture slotted G3000 sport rotors for superior heat management and debris venting.

Each rotor features a Geomet thermic anti-rust coating to maintain a clean appearance and resist corrosion in harsh environments. The pads utilize EBC’s patented Brake-in surface coating, which scours the rotor surface and accelerates the bedding process to ensure full friction performance immediately after installation. Every rotor is fully balanced and run-out tested to guarantee smooth, vibration-free braking under various load conditions.

• Manufacturer Part Number: S10KR1445
• Rotor Construction: Wide-aperture slotted G3000 sport iron
• Finish: Geomet thermic anti-rust coating
• Pad Technology: High-efficiency pads with Brake-in surface treatment
• Fitment Type: Direct OE replacement kit

Fits select 2016-2020 Audi Q3 and 2017-2019 Volkswagen Golf models. This EBC Brakes S10 kit is a direct-fit performance upgrade designed for spirited driving and fast compacts, offering a significant improvement over original equipment braking systems.

This kit combines high-efficiency EBC pads with wide-aperture slotted G3000 sport rotors. The rotors are cast from premium G3000 metallurgy, precision balanced, and run-out tested to ensure smooth, vibration-free operation. To combat corrosion, each rotor is finished with a Geomet thermic anti-rust coating. The included brake pads feature EBC’s patented Brake-in coating, which accelerates the bedding process for immediate stopping power out of the box.

• Includes high-efficiency EBC pads and G3000 slotted sport rotors
• Wide-aperture slots help degas the braking surface and maintain cool operating temperatures
• Geomet anti-rust coating protects non-friction surfaces from corrosion
• Precision balanced and run-out tested for zero pedal pulsation
• Patented Brake-in coating for faster pad-to-rotor seating
• Manufacturer Part Number: S10KR1444

Fits select 2015-2023 Subaru Legacy, Outback, and WRX models.

The EBC Brakes S10 Brake Pad and Rotor Kit (S10KR1403) is a complete performance upgrade designed to replace factory components with hardware capable of handling higher thermal loads. This kit combines high-efficiency Aramid fiber pads with G3000-series alloy rotors, offering improved heat dissipation and debris clearance for spirited driving and daily use.

• Aramid Fiber Pads: Feature a fully shimmed, slotted, and chamfered design to minimize noise and vibration. The patented Brake-in coating ensures rapid pad seating and optimal friction immediately after installation.
• G3000 Sport Rotors: Vented rotors with wide aperture slots and spot drilling to pull cool air into the braking area while effectively removing dust, dirt, and gases.
• Geomet Coating: Each rotor is finished with a Geomet anti-rust coating to prevent corrosion on non-contact surfaces and ensure long-term durability.
• Direct Replacement: This kit is a direct fit to factory mounting points, requiring no modifications to the stock braking system.
• Included Components: The kit includes high-performance brake pads, matched sport rotors, and caliper lubricant for a complete installation.

Fits select 2017-2023 Audi A4, A4 allroad, A4 Quattro, A5 Quattro, Q5, S4, S5, and SQ5.

The EBC Brakes S10 Brake Pad and Rotor Kit (MPN S10KR1402) is a precision-engineered performance upgrade designed for spirited driving and improved thermal management. This direct-fit kit replaces your factory hardware with high-efficiency aramid fiber pads and wide-aperture slotted G3000 rotors, delivering a significant improvement in stopping power over OE components for your Audi sedan or SUV.

• High-Efficiency Aramid Pads: Built with aramid fiber, these pads are fully shimmed, slotted, and chamfered to minimize noise and vibration while maximizing grip.
• Brake-In Coating: Features EBC’s patented coating to ensure rapid pad seating and optimal friction levels immediately after installation.
• G3000 Sport Rotors: Vented rotors with wide aperture slots and spot drilling to draw cool air into the braking surface while rapidly clearing dust, dirt, and gases.
• Geomet Anti-Rust Finish: Every rotor is treated with a Geomet coating to prevent corrosion and maintain a professional look through the wheel spokes.
• Complete Installation Kit: Includes performance pads, sport rotors, and caliper lubricant for a comprehensive brake service.
• Manufacturer Support: Backed by a 10,000-mile no-hassle manufacturer warranty.

Fits select 2016-2023 Audi TT, TT RS, and TTS, and Volkswagen Arteon, Golf, Jetta, Taos, and Tiguan.

The EBC Brakes S10 Series Brake Pad and Rotor Kit is an engineered performance upgrade designed for spirited driving and improved stopping power over original equipment. This kit (MPN S10KR1396) combines high-efficiency Aramid fiber brake pads with G3000 sport rotors to reduce brake fade and ensure consistent pedal feel. The pads are fully shimmed, slotted, and chamfered, featuring EBC’s patented Brake-in coating for rapid pad seating immediately after installation. The matched vented rotors are cast from premium G3000 iron and feature wide-aperture slots that actively draw cool air into the braking zone while expelling dust, dirt, and debris.

• High-efficiency Aramid fiber pads provide significant friction improvement over OE compounds
• G3000 sport vented rotors with wide-aperture slots for maximum cooling and debris removal
• Full Geomet anti-rust coating protects the entire rotor surface against corrosion
• Brake-in coating ensures fast pad-to-rotor seating for immediate performance
• Direct-fit design bolts to factory mounting points with no modifications required
• Kit includes pads, rotors, and caliper lubricant
• Backing by a 10,000-mile no-hassle warranty

Fits 2015-2022 Subaru WRX (Base, GT, Limited, and Premium).

The EBC Brakes S10 Brake Pad and Rotor Kit (S10KR1381) provides a direct-fit performance upgrade for drivers seeking improved thermal management and stopping power. This kit replaces factory components with high-efficiency Aramid fiber pads and G3000 alloy sport rotors, specifically designed to handle the demands of spirited street driving and sport compact applications.

• High-Efficiency Pads: Constructed with Aramid fiber, these pads are fully shimmed, slotted, and chamfered. They feature EBC's patented Brake-in coating for rapid pad seating immediately after installation.
• G3000 Sport Rotors: These vented rotors are spot-drilled and feature wide aperture slots to draw cool air into the braking area while clearing dust, dirt, and gases for consistent pedal feel.
• Geomet Coating: All rotors are finished with a Geomet anti-rust coating to prevent corrosion and maintain a clean appearance behind the wheels.
• Direct Fit: Replaces OE hardware with no modifications required to the stock setup.
• Kit Contents: Includes high-performance brake pads, wide aperture slotted rotors, and high-temperature caliper lubricant.
• Warranty: 10,000-mile no-hassle manufacturer warranty.

Fits 1989-1996 Nissan 300ZX Base, Turbo, and 2+2 models.

The EBC Brakes S10 Brake Pad and Rotor Kit (MPN S10KR1355) is an engineered upgrade designed to improve stopping power and thermal management over original equipment components. This kit pairs high-efficiency EBC pads with G3000 sport rotors, providing a direct-fit solution that requires no modifications to your factory brake system.

The included pads are manufactured with a high-friction Aramid fiber compound, featuring a fully shimmed, slotted, and chamfered design to reduce noise and vibration. Each pad is finished with EBC’s patented Brake-in™ surface coating, which accelerates the pad seating process immediately after installation. The matched sport rotors utilize a wide-aperture slotted and spot-drilled design to pull cool air into the braking contact zone while effectively venting dust, gases, and debris. To ensure long-term durability and resistance to corrosion, all rotors are treated with a Geomet anti-rust coating.

• Direct-fit upgrade for factory braking systems
• High-efficiency Aramid fiber brake pads for improved friction
• Patented Brake-in™ coating for rapid pad-to-rotor seating
• Wide-aperture slotted G3000 sport rotors for superior cooling
• Geomet anti-rust finish prevents corrosion on non-contact surfaces
• Includes premium caliper lubricant and hardware
• Manufacturer Part Number: S10KR1355

Fits 1986-1991 Mazda RX-7 models (Turbo, GXL, GTU, SE, and Base).

The EBC Brakes S10 Brake Pad and Rotor Kit (S10KR1337) is a performance-matched upgrade designed to replace factory hardware on the 1986-1991 Mazda RX-7. This kit provides a significant improvement over OE braking by combining high-efficiency Aramid fiber pads with G3000 sport vented rotors, ensuring better thermal management and more consistent stopping power without requiring modifications to the stock setup.

The included pads are fully shimmed, slotted, and chamfered to reduce noise, featuring a patented Brake-in coating for rapid pad seating after installation. They are paired with wide-aperture slotted rotors that utilize spot drilling and a vented design to draw cool air into the braking area while clearing dust and debris. All non-friction surfaces are finished with a Geomet anti-rust coating to maintain appearance and structural integrity over time.

• Aramid Fiber Pads: High-efficiency composite pads that are fully shimmed and slotted for quiet, reliable performance.
• G3000 Sport Rotors: Wide aperture slotted and spot-drilled rotors for superior cooling and debris removal.
• Brake-in Coating: Patented EBC surface coating for faster pad-to-rotor seating.
• Geomet Anti-Rust Finish: Provides long-lasting corrosion protection on the rotor surfaces.
• Direct Fit: Replaces OE components with no changes required to the stock mounting points.
• Manufacturer Part Number: S10KR1337
• Warranty: 10,000-mile manufacturer no-hassle warranty.

The EBC Brakes S10 Sport Brake Pad and Rotor Kit fits select 1997-2010 Audi TT and Volkswagen Beetle, Golf, and Jetta models (1.8T). This direct-fit upgrade provides a significant improvement in stopping power over OE components, making it an ideal choice for spirited street driving and sport compacts.

This comprehensive kit includes EBC high-efficiency brake pads manufactured with Aramid fiber. These pads are fully shimmed, slotted, and chamfered to reduce noise and vibration, and feature the patented Brake-in™ coating to accelerate pad seating immediately after installation. The pads are paired with G3000 sport vented rotors, which feature wide-aperture slots and spot drilling. This design draws cool air into the braking area while shedding dust, dirt, and debris more effectively than standard rotors. All rotors are finished with a Geomet anti-rust coating to maintain a clean appearance and prevent corrosion on non-friction surfaces.

• Rotors: Wide-aperture slotted and spot-drilled G3000 sport vented rotors
• Pads: Aramid fiber pads with Brake-in™ coating for fast seating
• Finish: Geomet anti-rust coating for long-term corrosion resistance
• Hardware: Includes caliper lubricant for a complete installation
• Warranty: 10,000-mile manufacturer no-hassle warranty
• MPN: S10KR1324

Fits select 2010-2019 Audi A3 and Volkswagen Golf, Jetta, Alltrack, and SportWagen.

The EBC Brakes S10 Pad and Rotor Kit is a performance-oriented upgrade engineered for spirited daily driving. This comprehensive kit replaces factory components with high-efficiency aramid fiber pads and G3000 sport rotors, providing a significant improvement in stopping power and thermal management compared to standard OE sets. The wide-aperture slots are specifically designed to draw cool air into the braking area while effectively clearing dust and debris for consistent pad-to-rotor contact.

• High-Efficiency Pads: Built with aramid fiber, these pads are fully shimmed, slotted, and chamfered for quiet operation. Includes patented EBC Brake-in coating for accelerated pad seating.
• G3000 Sport Rotors: Vented rotors feature spot drilling and wide-aperture slots to maintain a flat, parallel pad wear surface and lower operating temperatures.
• Geomet Anti-Rust Coating: Complete surface protection prevents corrosion and ensures the rotors remain clean and professional in appearance.
• Complete Installation: This direct-fit kit requires no modifications and includes pads, rotors, and high-performance caliper lubricant.
• Manufacturer Part Number: S10KR1317

Fits select 1988-2001 Acura Integra and Honda Accord, Civic, Civic del Sol, CRX, and Prelude models. This EBC Brakes S10 Series kit is a direct-fit performance upgrade designed for spirited street driving and sport compact applications, offering a significant improvement over original equipment setups.

This comprehensive kit features high-efficiency EBC brake pads formulated with Aramid fiber. These pads are fully shimmed, slotted, and chamfered to reduce noise and vibration, and include the patented EBC Brake-in coating to ensure rapid pad seating immediately after installation. To complement the pads, the kit includes G3000 sport vented rotors featuring wide aperture slots and spot drilling. These rotors are engineered to draw cool air into the braking area and quickly expel dust, dirt, and debris for consistent performance.

• Includes high-performance Aramid fiber pads and G3000 wide aperture slotted rotors.
• Geomet anti-rust coating on rotors for long-lasting corrosion resistance.
• Wide aperture slots help maintain flat and parallel pad wear while reducing brake fade.
• Direct fit installation requires no modifications to the factory braking system.
• Includes caliper lubricant for a complete service.
• Manufacturer Part Number: S10KR1307.
• Backed by a 10,000-mile no-hassle manufacturer warranty.