This ACL Standard Size Thrust Washer is engineered as a direct replacement for your worn or damaged factory unit, critical for maintaining proper crankshaft end play in Toyota 1ZZFE and 2ZZGE engines from 1998 and newer. Thrust washers absorb the axial loads placed on the crankshaft, preventing excessive front-to-back movement that can lead to premature wear of other vital engine components.

• Engineered to standard factory dimensions
• Direct replacement for OEM thrust washer
• Critical component for crankshaft axial load management
• Manufacturer Part Number: 1T1853-STD

Properly maintaining crankshaft end play is essential for engine longevity and performance. This ACL thrust washer helps restore precise clearances, ensuring reliable operation of your Toyota 1ZZFE or 2ZZGE engine.

Maintain critical crankshaft end play with the ACL Standard Size Thrust Washer, engineered for precise fitment in 2008 and newer Mitsubishi Lancer Evolution X (4B11T) and Hyundai Genesis models equipped with the 4B11T engine.

A thrust washer is a vital component in your engine's rotating assembly, specifically designed to control the crankshaft's axial movement within its journals. By limiting fore and aft motion, this washer prevents excessive wear on the crankshaft, block, and other bearing surfaces, ensuring long-term engine health and performance.

• Size: Standard Size, ideal for crankshafts that have not been machined and require factory specification end play.
• MPN: 1T1237-STD
• Vehicle Fitment: 2008+ Mitsubishi Lancer Evolution X (4B11T), 2008+ Hyundai Genesis (4B11T)

Choosing a standard size thrust washer ensures accurate factory tolerances are restored, providing reliable operation and protecting your engine's internals from damaging movement.

The ACL Standard Size Thrust Washer (MPN: 1T1219-STD) is engineered to precisely control crankshaft end play in Mitsubishi 4G63 and 4G64 7-bolt engines, specifically found in the EVO V through IX models. This critical engine component prevents excessive axial movement of the crankshaft, which is vital for maintaining proper clearances and preventing premature wear on main bearings and other rotating assembly components.

When rebuilding or maintaining a high-performance engine like the 4G63/4G64, replacing wear items such as thrust washers is crucial. This ACL thrust washer is manufactured to OE specifications for standard size applications, ensuring a precise fit and reliable performance under demanding conditions. Proper crankshaft end play is essential for long-term engine durability and consistent power delivery.

• Application: Mitsubishi 4G63/4G64 7-Bolt EVO V-IX engines
• Size: Standard
• Manufacturer Part Number: 1T1219-STD

Fits 2009-2024 Nissan GT-R models, including Base, Premium, Black Edition, Track Edition, Nismo, and T-spec variants.

This ACL high-performance main bearing set is designed for precision engine builds requiring standard sizing on Version 4 blocks. Engineered to withstand the high loads and increased RPMs common in modified GT-R applications, these bearings provide the durability and oil clearance consistency necessary for reliable crankshaft support. Whether you are performing a routine refresh or a complete performance rebuild, this kit ensures your VR-series bottom end remains stable under pressure.

• Part Type: Main Bearing Set
• Sizing: Standard (STD)
• Block Compatibility: Version 4 Block
• Application: High Performance / Race
• Manufacturer Part Number: 1M2505H-STD-4

Fits select 2009-2024 Nissan GT-R models (3.8L V6) across all trims including Nismo, Premium, and Track Edition.

Engineered for the extreme tolerances of high-output VR38DETT builds, this ACL High Performance Main Bearing Set provides the essential durability required for competition and high-performance street use. These bearings are specifically designed for the Version 2 Nissan GT-R engine block, featuring a tri-metal construction that offers superior load-carrying capacity and fatigue resistance compared to standard OE components.

• Manufacturer Part Number: 1M2505H-STD-2
• Application: Nissan GT-R (R35) Version 2 Engine Blocks
• Sizing: Standard (STD) Size
• Material: High-strength tri-metal for improved thermal conductivity and durability
• Context: Essential for engine overhauls or performance upgrades where bearing reliability is critical

Fits 2009-2024 Nissan GT-R models (all trims including Premium, Nismo, and Track Edition).

The ACL High Performance Main Bearing Set is engineered to meet the extreme demands of the Nissan VR38DETT engine. This standard-sized (STD) set is specifically designed for Version 1 blocks, providing the necessary fatigue strength and precise tolerances required for high-performance builds and heavy engine loads. These bearings ensure reliable crankshaft support and consistent oil film thickness, protecting critical rotating components during high-RPM operation.

• Manufacturer Part Number: 1M2505H-STD-1
• Bearing Type: Main Bearing Set
• Size: Standard (STD)
• Block Compatibility: Version 1
• Construction: High-strength performance materials for increased durability
• Application: 2009-2024 Nissan GT-R

Fits select 2008-2023 Audi A3, Q3, S3, TT, TTS and Volkswagen Arteon, Atlas, Beetle, CC, Eos, Golf, GTI, Jetta, Passat, and Tiguan models.

Engineered for high-stress environments, the ACL High Performance Rod Bearing Set (1B5562H-STD) provides the durability and fatigue resistance required for modified engines and spirited driving. These standard-size bearings are designed to handle higher loads and RPMs than typical OE replacements, making them a critical upgrade during an engine rebuild or performance overhaul.

• Manufacturer Part Number: 1B5562H-STD
• Bearing Size: Standard (STD)
• Application: Connecting Rods
• Construction: High-strength tri-metal design for improved load capacity
• Compatible with a wide range of Audi and Volkswagen TFSI/TSI engines

Fits select 2009-2024 Nissan GT-R models across all trims including Nismo, Premium, Black Edition, and Track Edition.

These ACL connecting rod bearings are engineered for the high-performance demands of the GT-R's engine, providing the precision and durability required for enthusiast or track use. This specific part (MPN: 1B2500H-STD-1) is supplied as a single pair of bearings. Please note that a complete engine rebuild for the VR38DETT requires a total of 6 pairs.

• Manufacturer Part Number: 1B2500H-STD-1
• Bearing Size: Standard (STD)
• Quantity: One (1) Pair (Must order 6 for a full set)
• Construction: High-performance materials designed for increased load capacity
• Fitment: Designed specifically for the Nissan GT-R engine architecture

Fits the 1995 Volkswagen EuroVan Camper and other select 1983-1995 VW/Audi 4-cylinder and 5-cylinder engines (1780-1983cc).

This ACL Engine Connecting Rod Bearing Set is precision-engineered to restore reliable operation to your engine's rotating assembly. Designed as a direct replacement for worn factory bearings, this set (MPN 1B1606H-STD) ensures proper oil clearance and critical crankshaft protection. These bearings are essential for any engine overhaul or bottom-end refresh, providing the durability required for consistent performance.

• Manufacturer Part Number: 1B1606H-STD
• Engine Compatibility: 4-cylinder and 5-cylinder (1780cc to 1983cc)
• Standard (STD) size for original equipment journal specifications
• High-strength construction for enhanced fatigue resistance and friction reduction
• Engineered to meet or exceed OE tolerances for a precise fit

Fits 2006-2010 BMW M5 and M6 (5.0L).

Engineered for the high-revving BMW S85B50 V10 engine, this ACL Race Series performance rod bearing set is designed to meet the demands of high-performance driving. This specific "HX" series set provides an additional 0.025mm (0.001") of oil clearance compared to standard bearings. This increased clearance is a preferred choice for builders looking to improve oil flow and lubrication under high loads, providing a critical safeguard for the S85 engine's bottom end.

• Manufacturer Part Number: 10B1580HX-STD
• Engine Fitment: BMW S85B50 5.0L V10
• Bearing Size: Standard Size
• Clearance Spec: .001in (.025mm) Extra Oil Clearance (Thinner)
• Quantity: Full set for one engine (10 journal pairs)

Fits 2006-2010 BMW M5 and M6 Base models equipped with the S85B50 5.0L V10 engine.

This ACL Performance Rod Bearing Set is a critical upgrade for the high-revving BMW S85 engine, designed to provide the durability and load-carrying capacity required for performance driving. Engineered to replace worn factory components, these bearings utilize a tri-metal construction to handle the high-RPM demands and thermal stresses unique to the V10 powertrain. Precision manufacturing ensures consistent oil clearance and reliable crankshaft protection.

• Standard (STD) size for original equipment specifications
• High-strength tri-metal design for superior fatigue resistance
• Hardened steel backs to maintain bearing crush and retention
• Optimized for the high-revving S85B50 V10 engine architecture
• Manufacturer Part Number: 10B1580H-STD