Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7.5” tall 360-degree radial flow air filter features a 3.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air from the engine compartment or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. An extension harness is included in the kit to accommodate the relocation of the Mass Air Flow (MAF) Sensor seamlessly. Stainless-steel clamps and a silicone coupling are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Sealed Housing Captures Cool Air Directly From Factory Inlet
• Dyno-Tuned Air Intake Tube

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features a 5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. An extension harness is included in the kit to accommodate the relocation of the Mass Air Flow (MAF) Sensor seamlessly. Stainless-steel clamps and a silicone coupling are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Sealed Housing Captures Cool Air Directly From Factory Inlet

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall, pre-oiled 360-degree radial flow air filter features a 5-1/2” flange and our pre-oiled Pro 10R media with ten layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals, while reinforced metal provides maximum strength to prevent filter collapse. This media is best suited for off-road applications. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing connect to the factory air inlet scoop, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. A plug is provided to close the auxiliary opening. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel T-bolt clamps are included for strength, and a premium bellows silicone coupling allows for ample flexibility. Momentum HD intakes are designed with fewer parts for a fast and easy installation.

• Innovative Filter-to-Housing Interface (US PAT 9440175) and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• Washable and Reusable Pro 10R Air Filter for Maximum Dust Holding Capacity and Longevity
• Sealed Housing Utilizes Factory Air Inlet Scoop and Auxiliary Air Inlet
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Premium T-Bolt Clamps and a Bellows Coupling Provide a Secure Seal

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while reinforced metal provides maximum strength to prevent filter collapse. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing connect to the factory air inlet scoop, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. A plug is provided to close the auxiliary opening. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel T-bolt clamps are included for strength, and a premium bellows silicone coupling allows for ample flexibility. Momentum HD intakes are designed with fewer parts for a fast and easy installation.

• Innovative Filter-to-Housing Interface (US PAT 9440175) and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• Sealed Housing Utilizes Factory Air Inlet and Auxiliary Air Inlet Scoop
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Premium T-Bolt Clamps and a Bellows Coupling Provide a Secure Seal
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience

This Part Fits:

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. Its inverted bullet-style top makes for more filter surface area, resulting in longer service intervals. This media is perfect for street and/or track use. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a premium silicone coupling allows for ample flexibility. Takeda intakes are designed with fewer parts for a fast and easy installation.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro 5R Air Filters for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. Its inverted bullet-style top makes for more filter surface area, resulting in longer service intervals. This media is perfect for street and/or track use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system uses a ribbed bellows silicone intake tube for maximum flexibility and is ribbed to prevent vacuum collapse while maintaining a perfect fit. Stainless-steel clamps are included for strength and durability. A billet aluminum adapter allows you to retain the factory crankcase vent line. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Ribbed Bellows Silicone Intake Tube absorbs engine movement while maintaining rigidity
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Incorporates the Factory Air Inlet Scoop with No Additional Hardware
• Washable and Reusable Pro 5R Air Filters for Maximum Performance
• Premium Stainless Steel Clamps Provide a Secure Seal
• Dyno-Proven Gains up to +6 HP and +5 Lbs. x Ft. TQ
• Measured Flow: 215 CFM @ 7" H2O
• Outflows Factory Intake by 79%

This Part Fits:

This aFe POWER Pro 5R is a 7-1/2” tall, pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. All stainless-steel clamps, hardware, and silicone couplings are included for a hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

This aFe POWER Pro DRY S is a 7-1/2” tall, oil-free, 360-degree conical flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. All stainless-steel clamps, hardware, and silicone couplings are included for a hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

This aFe POWER Pro 5R is a 7-1/2” tall, pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modification. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Dyno-Proven Gains up to +13 HP & +12 Lbs. x Ft. TQ
• Measured Flow: 290 CFM @ 7" H20
• Outflows Factory Intake by 38%

This Part Fits:

This aFe POWER Pro DRY S is a 7-1/2” tall, oil-free, 360-degree conical flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modification. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

• Durable XLPE Construction and Sealed Housing Protects from Impact, Extreme Temperatures, and Other Elements
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Dyno-Proven Gains up to +8 HP & +8 Lbs. x Ft. TQ
• Measured Flow: 280 CFM @ 7" H20
• Outflows Factory Intake by 33%

This Part Fits:

This aFe POWER Pro 5R is a 7-1/2” tall, pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. This system features a two-piece, computer-designed, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Constructed from XLPE (cross-linked polyethylene) polymer, it is heat soak resistant and extremely durable. A factory-style Helmholtz Chamber is integrated into its design, toning down any drone. All stainless-steel clamps, hardware, and silicone couplings are included for a hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Innovative Filter-to-Housing Interface and Two-Piece Tube for Easy Installation & Maintenance
• Dyno-Proven Gains up to +5 HP & +6 Lbs. x Ft. TQ
• Measured Flow: 275 CFM @ 7" H20
• Outflows Factory Intake by 38%

This Part Fits:

This aFe POWER Pro DRY S is a 7-1/2” tall, oil-free, 360-degree conical flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The sealed XLPE polymer housing featres a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air.This system features a two-piece, computer-designed, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Constructed from XLPE (cross-linked polyethylene) polymer, it is heat soak resistant and extremely durable. A factory-style Helmholtz Chamber is integrated into its design, toning down any drone. All stainless-steel clamps, hardware, and silicone couplings are included for a hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Innovative Filter-to-Housing Interface and Two-Piece Tube for Easy Installation & Maintenance
• Dyno-Proven Gains up to +4 HP & +3 Lbs. x Ft. TQ
• Measured Flow: 260 CFM @ 7" H20
• Outflows Factory Intake by 30%

This Part Fits:

This aFe POWER Pro DRY S is a 7-1/2” tall, oil-free, 360-degree conical flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. This system features a two-piece, computer-designed, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Constructed from XLPE (cross-linked polyethylene) polymer, it is heat soak resistant and extremely durable. A factory-style Helmholtz Chamber is integrated into its design, toning down any drone. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. All stainless-steel clamps, hardware, and silicone couplings are included for a hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Innovative Filter-to-Housing Interface and Two-Piece Tube for Easy Installation & Maintenance
• Dyno-Proven Gains up to +7 HP & +6 Lbs. x Ft. TQ
• Measured Flow: 260 CFM @ 7" H20
• Outflows Factory Intake by 8%

This Part Fits:

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. Its inverted bullet-style top makes for more filter surface area, resulting in longer service intervals. This media is perfect for street and/or track use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a silicone bellows coupling allows for ample flexibility. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Premium Stainless Steel Clamps and a Bellows Coupling Provide a Secure Seal
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Incorporates the Factory Air Inlet Scoop with No Additional Hardware
• Washable and Reusable Pro 5R Air Filters for Maximum Performance
• Dyno-Proven Gains up to +8 HP and +7 Lbs. x Ft. TQ
• Measured Flow: 265 CFM @ 7" H2O
• Outflows Factory Intake by 77%

This Part Fits:

This aFe POWER Pro 5R is a 7-1/2” tall, pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. This system features a two-piece, computer-designed, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Constructed from XLPE (cross-linked polyethylene) polymer, it is heat soak resistant and extremely durable. A factory-style Helmholtz Chamber is integrated into its design, toning down any drone. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. All stainless-steel clamps, hardware, and silicone couplings are included for a hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

• Durable XLPE Construction and Sealed Housing Protects from Impact, Extreme Temperatures, and Other Elements
• Innovative Filter-to-Housing Interface and Two-Piece Tube for Easy Installation & Maintenance
• Dyno-Proven Gains up to +5 HP & +5 Lbs. x Ft. TQ
• Measured Flow: 255 CFM @ 7" H20
• Outflows Factory Intake by 52%

This Part Fits:

These 6” tall 360-degree radial flow air filters feature a 3-1/2” round flange and our pre-oiled Pro 5R media, with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Their inverted bullet-style tops make for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housings, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, feature our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. It features a Takeda design inspired by import vehicles. Stainless-steel clamps and reinforced silicone couplings are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation. The included barbed fitting allows the stock connection to transfer over seamlessly.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
• Clear Sight Windows for Convenient Filter Inspection without Disassembly
• Washable and Reusable Pro 5R Air Filters for Maximum Performance
• Sealed Housings Capture Cool Air Directly Behind Front Grille

This Part Fits:

These 6” tall 360-degree radial flow air filters feature a 3-1/2” round flange and our oil-free Pro DRY S media, with three layers of synthetic media for maximum convenience. The progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Their inverted bullet-style tops make for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housings, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, feature our patent-pending filter-to-housing interface. Two large, clear sight windows allow for hassle-free filter inspection, without having to disassemble your system. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. It features a Takeda design inspired by import vehicles. Stainless-steel clamps and reinforced silicone couplings are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation. The included barbed fitting allows the stock connection to transfer over seamlessly.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
• Clear Sight Windows for Convenient Filter Inspection without Disassembly
• Washable and Reusable Pro Dry S Air Filters for Maximum Performance
• Sealed Housings Capture Cool Air Directly Behind Front Grille

This Part Fits:

This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The Takeda intake is designed to fit with the factory strut brace, with no modifications necessary. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum intakes are designed with fewer parts for a fast and easy installation.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Dyno-Proven Gains up to +13 HP & +16 Lbs. x Ft. TQ
• Measured Flow: 345 CFM @ 7” H20
• Outflows Factory Intake by 30%

This Part Fits:

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 8” tall 360-degree radial flow air filter features a 4" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while reinforced metal provides maximum strength to prevent filter collapse. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features a Takeda design inspired by import vehicles. Stainless-steel clamps and a bellows silicone coupling are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation. The included barbed fitting allows the stock connection to transfer over seamlessly.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
• Clear Sight Window for Convenient Filter Inspection without Disassembly
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Sealed Housing Captures Cool Air Directly Behind Front Grille
• Measured Flow: 295 CFM @ 7” H2O
• Outflows factory intake by 55%

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2” tall 360-degree radial flow air filter features a 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features a Takeda design inspired by import vehicles. Stainless-steel clamps and reinforced silicone couplings are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation. Included billet aluminum fittings allows stock connections to transfer over seamlessly.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (Roughly 20 Minutes)
• Dyno-Proven Gains up to +13 HP and +12 Lbs. x Ft. TQ (Intake System tested on Veloster N)
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Sealed Housing Captures Cool Air Directly Behind Front Grille
• Oversized Tube with Import-Inspired Design
• Measured Flow: 255 CFM @ 7" H20
• Outflows Factory Intake by 28%

This aFe POWER Pro 5R air filter is a 7-1/2” tall, pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Washable and Reusable Pro 5R Air Filter for Maximum Performance

This Part Fits:

This aFe POWER Pro DRY S air filter is a 7-1/2” tall, oil-free, 360-degree conical flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience

This Part Fits:

This 6” tall 360-degree radial flow air filter features a 4.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is perfect for street and/or track use. Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by uninstalling the intake tube. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. This Takeda housing with seamlessly interface with the factory inlet scoop. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop, using no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a premium silicone tube is used for durability while also providing the most secure installation available. Nylon vacuum fittings are included for a perfect fit and finish. Takeda intakes are designed with fewer parts for a fast and easy installation.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Optional Dynamic Air Scoops are available to maximize air flow for this Takeda intake system
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro 5R Air Filters for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

This 6” tall 360-degree radial flow air filters feature a 4.5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street use. Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by uninstalling the intake tube. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. This Takeda housing with seamlessly interface with the factory inlet scoop. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop, using no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a premium silicone tube is used for durability while also providing the most secure installation available. Nylon vacuum fittings are included for a perfect fit and finish. Takeda intakes are designed with fewer parts for a fast and easy installation. To maximize the amount of air going to the this Air Intake System,

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Optional Dynamic Air Scoops are available to maximize air flow for this Takeda intake system
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro 5R Air Filters for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

This 7-1/2” tall 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing is constructed of heat-resistant cross-linked polyethylene (XLPE). A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. An auxiliary air inlet can be used, or closed with a supplied plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (20 Minutes)
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Built-In Scoop Provides Air Directly into the Housing
• Dyno-Proven Gains up to +10 HP & +11 Lbs. x Ft. TQ
• Measured Flow: 280 CFM @ 7" H2O
• Outflows Factory Intake by 27%

This Part Fits:

This 7-1/2” tall 360-degree radial flow air filter features a 3-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing is constructed of heat-resistant cross-linked polyethylene (XLPE). A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. An auxiliary air inlet can be used, or closed with a supplied plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (20 Minutes)
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Built-In Scoop Provides Air Directly into the Housing
• Dyno-Proven Gains up to +7 HP & +8 Lbs. x Ft. TQ
• Measured Flow: 265 CFM @ 7" H2O
• Outflows Factory Intake by 20%

This Part Fits:

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2” tall 360-degree radial flow air filter features a 4" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

• Innovative Filter-to-Housing Interface and minimal hardware for fast and easy installation
• Clear sight window for convenient Filter Inspection without disassembly
• Washable and reusable Pro 5R Air Filter for Maximum performance
• Sealed Housing capture cool air directly behind front grille
• Dyno-proven gains up to +14 HP & +12 Lbs. x Ft. TQ
• Out flows factory air intake by 69%
• Measured Flow: 330 CFM @7” H2O

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2” tall 360-degree radial flow air filter features a 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

• Innovative Filter-to-Housing Interface and minimal hardware for fast and easy installation
• Clear sight window for convenient Filter Inspection without disassembly
• Washable and reusable Pro Dry S Air Filter for Maximum performance
• Sealed Housing capture cool air directly behind front grille
• Dyno-proven gains up to +10 HP & +8 Lbs. x Ft. TQ
• Out flows factory air intake by 64%
• Measured Flow: 320 CFM @7” H2O

This Part Fits:

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2” tall 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet is used to bring in additional air from the engine compartment. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. The silicone bellows coupling absorbs excessive engine movement and is flexible for a secure and easy install.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• One-Piece Housing Captures Air Directly from Scoop and Auxiliary inlet
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Dyno-Proven Gains up to +7 HP and +9 Lbs. x Ft. TQ
• Measured Flow: 245 CFM @ 7" H20
• Outflows Factory Intake by 17%
• Dyno Tuned Air Intake Tube

This Part Fits:

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2” tall 360-degree radial flow air filter features a 3-1/2" flange and our oiled-free Pro DRY S media with three layers of synthetic media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet is used to bring in additional air from the engine compartment. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. The silicone bellows coupling absorbs excessive engine movement and is flexible for a secure and easy install.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• One-Piece Housing Captures Air Directly from Scoop and Auxiliary inlet
• Washable and Reusable Pro DRY S Air Filter for Maximum Performance
• Dyno-Proven Gains up to +7 HP and +9 Lbs. x Ft. TQ
• Measured Flow: 240 CFM @ 7" H20
• Outflows Factory Intake by 14%
• Dyno Tuned Air Intake Tube

This Part Fits: