Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1976 products
1976 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$497.00
The 3.0L Hurricane engine demands serious airflow—and our open cold air intake delivers. Designed to let your RHO breathe deeper and perform harder, it pulls in cool, dense air for sharper throttle response and dyno-proven horsepower gains. The open-element design lets the turbo sing with a deeper induction tone, while roto-molded intake tube keeps airflow smooth and unrestricted. Engineered for performance you can feel and sound you can hear, this intake transforms your RHO into the beast it was meant to be. Pro Dry S Air Filter captures dirt without oil. It uses three layers of dense synthetic fibers to trap particles. It makes cleaning and maintaining your filter convenient. The dyno-tuned intake tube is engineered to optimize airflow and maximize power and torque based on real-world testing. Made from heat-resistant and durable XLPE material, it guarantees a precise fit. Premium stainless-steel clamps are included for strength, while the silicone couplings allow for ample flexibility.
Installation Instructions- The open intake design allows your engine to draw in more air with less restriction, boosting horsepower and torque, while amplifying the intake roar
- Open-element design puts the air filter on display and produces a bold, aggressive intake sound
- Easy Installation: Smart filter-to-housing design with minimal hardware for hassle-free install
- Premium stainless-steel clamps and silicone couplings provide a secure seal
- Pro DRY S Air Filter Media: Washable, reusable, and built for convenience
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ram | 1500 | RHO |
$376.00
This 8” tall 360-degree radial flow air filter features a 4.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. The factory air inlet scoop passes directly into the airbox providing a ram-air effect. The open design allows for easy viewing of the air filter and delivers an aggressive intake induction sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Integrated Passthrough for Factory Scoop Creates a Ram-Air Effect
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2024-2025 | Jeep | Wrangler | Sahara 4xe |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2024-2025 | Jeep | Wrangler | Willys 4xe |
$500.00
This 9” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's factory air inlet. The built-in air intake scoop captures cold air directly from the top of the radiator support thanks to its huge opening. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel clamps are included for strength, and a premium silicone bellow coupling allow for ample flexibility.
Installation Instructions- Housing with built-in air intake scoop to capture cold air directly from the top of radiator support
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | Ford | F-150 | Raptor |
$376.00
This 8” tall 360-degree radial flow air filter features a 4.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. The factory air inlet scoop passes directly into the airbox providing a ram-air effect. The open design allows for easy viewing of the air filter and delivers an aggressive intake induction sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Integrated Passthrough for Factory Scoop Creates a Ram-Air Effect
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023 | Jeep | Wrangler | High Altitude 4xe |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2023 | Jeep | Wrangler | Rubicon |
| 2023 | Jeep | Wrangler | Rubicon 4xe |
| 2023 | Jeep | Wrangler | Sahara |
| 2023 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2023 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2023 | Jeep | Wrangler | Sport S |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2021 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2023 | Jeep | Wrangler | Willys |
| 2023 | Jeep | Wrangler | Willys 4xe |
| 2021-2023 | Jeep | Wrangler | Willys Sport |
$376.00
This 8” tall 360-degree radial flow air filter features a 4.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. The factory air inlet scoop passes directly into the airbox providing a ram-air effect. The open design allows for easy viewing of the air filter and delivers an aggressive intake induction sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Integrated Passthrough for Factory Scoop Creates a Ram-Air Effect
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$500.00
This 7” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. This air filter was specially designed for the SRT Hellcat / SRT Demon / SRT Redeye. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the massive air filter, yet seals to the hood to gather air from the factory hood scoop. The housing also connects to the factory headlight air inlet thanks to the scoop inlet provided. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points. All necessary clamps, a silicone bellows coupling, and all other hardware is included. For the SRT Hellcat and SRT Hellcat Redeye, the factory MUA (Multi-Air Unit Actuator) is easily connected to the air intake tube. All clamps and hose are provided to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Housing Seals to Hood Scoop, Collecting Cool Outside Air Along w/ Headlight Air Inlet
- Premium Stainless-Steel Clamps and Silicone Bellow Couplings Provide a Secure Seal
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018 | Dodge | Challenger | SRT Demon |
| 2019-2022 | Dodge | Challenger | SRT Hellcat |
| 2023 | Dodge | Challenger | SRT Hellcat Jailbreak |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Redeye Widebody |
| 2023 | Dodge | Challenger | SRT Hellcat Redeye Widebody Jailbreak |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Widebody |
| 2023 | Dodge | Challenger | SRT Hellcat Widebody Jailbreak |
| 2022 | Dodge | Challenger | SRT Jailbreak |
| 2020-2023 | Dodge | Challenger | SRT Super Stock |
$522.00
This 7” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. This air filter was specially designed for the SRT Hellcat / SRT Demon / SRT Redeye. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the massive air filter, yet seals to the hood to gather air from the factory hood scoop. The housing also connects to the factory headlight air inlet thanks to the scoop inlet provided. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points. All necessary clamps, a silicone bellows coupling, and all other hardware is included. For the SRT Hellcat and SRT Hellcat Redeye, the factory MUA (Multi-Air Unit Actuator) is easily connected to the air intake tube. All clamps and hose are provided to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Housing Seals to Hood Scoop, Collecting Cool Outside Air Along w/ Headlight Air Inlet
- Premium Stainless-Steel Clamps and Silicone Bellow Couplings Provide a Secure Seal
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018 | Dodge | Challenger | SRT Demon |
| 2019-2022 | Dodge | Challenger | SRT Hellcat |
| 2023 | Dodge | Challenger | SRT Hellcat Jailbreak |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Redeye Widebody |
| 2023 | Dodge | Challenger | SRT Hellcat Redeye Widebody Jailbreak |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Widebody |
| 2023 | Dodge | Challenger | SRT Hellcat Widebody Jailbreak |
| 2022 | Dodge | Challenger | SRT Jailbreak |
| 2020-2023 | Dodge | Challenger | SRT Super Stock |
$387.00
This 9” tall 360-degree radial flow air filter features a 5-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filter is surrounded by an open-element XLPE (Cross-linked Polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicles OE air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and a Silicone Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2020-2021 | Ram | 1500 | Special Service |
| 2019-2024 | Ram | 1500 | Tradesman |
$399.00
This 9” tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The included massive air filter is surrounded by an open-element XLPE (Cross-linked Polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicles OE air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and a Silicone Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2020-2021 | Ram | 1500 | Special Service |
| 2019-2024 | Ram | 1500 | Tradesman |
$387.00
This 9” tall 360-degree radial flow air filter features a 5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. The open design allows for easy viewing of the air filter and delivers an aggressive intake induction sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2014 | Cadillac | Escalade | Base |
| 2011-2014 | Cadillac | Escalade | Luxury |
| 2009-2014 | Cadillac | Escalade | Platinum |
| 2011-2014 | Cadillac | Escalade | Premium |
| 2009-2014 | Cadillac | Escalade ESV | Base |
| 2011-2014 | Cadillac | Escalade ESV | Luxury |
| 2009-2014 | Cadillac | Escalade ESV | Platinum |
| 2011-2014 | Cadillac | Escalade ESV | Premium |
| 2009-2013 | Cadillac | Escalade EXT | Base |
| 2011-2013 | Cadillac | Escalade EXT | Luxury |
| 2011-2013 | Cadillac | Escalade EXT | Premium |
| 2013 | Chevrolet | Avalanche | Black Diamond LS |
| 2013 | Chevrolet | Avalanche | Black Diamond LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LTZ |
| 2009-2012 | Chevrolet | Avalanche | LS |
| 2009-2012 | Chevrolet | Avalanche | LT |
| 2009-2012 | Chevrolet | Avalanche | LTZ |
| 2009-2013 | Chevrolet | Silverado 1500 | LS |
| 2009-2013 | Chevrolet | Silverado 1500 | LT |
| 2009-2013 | Chevrolet | Silverado 1500 | LTZ |
| 2009-2013 | Chevrolet | Silverado 1500 | WT |
| 2010-2013 | Chevrolet | Silverado 1500 | XFE |
| 2009-2014 | Chevrolet | Suburban 1500 | LS |
| 2009-2014 | Chevrolet | Suburban 1500 | LT |
| 2009-2014 | Chevrolet | Suburban 1500 | LTZ |
| 2009-2014 | Chevrolet | Tahoe | LS |
| 2009-2014 | Chevrolet | Tahoe | LT |
| 2009-2014 | Chevrolet | Tahoe | LTZ |
| 2009-2014 | Chevrolet | Tahoe | PPV |
| 2012-2014 | Chevrolet | Tahoe | SSV |
| 2009-2013 | GMC | Sierra 1500 | Denali |
| 2009-2013 | GMC | Sierra 1500 | SL |
| 2009-2013 | GMC | Sierra 1500 | SLE |
| 2009-2013 | GMC | Sierra 1500 | SLT |
| 2009-2013 | GMC | Sierra 1500 | WT |
| 2010-2013 | GMC | Sierra 1500 | XFE |
| 2009-2014 | GMC | Yukon | SLE |
| 2009-2014 | GMC | Yukon | SLT |
| 2009-2014 | GMC | Yukon XL 1500 | Denali |
| 2009-2014 | GMC | Yukon XL 1500 | SLE |
| 2009-2014 | GMC | Yukon XL 1500 | SLT |
$399.00
This 9” tall 360-degree radial flow air filter features a 5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. The open design allows for easy viewing of the air filter and delivers an aggressive intake induction sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2014 | Cadillac | Escalade | Base |
| 2011-2014 | Cadillac | Escalade | Luxury |
| 2009-2014 | Cadillac | Escalade | Platinum |
| 2011-2014 | Cadillac | Escalade | Premium |
| 2009-2014 | Cadillac | Escalade ESV | Base |
| 2011-2014 | Cadillac | Escalade ESV | Luxury |
| 2009-2014 | Cadillac | Escalade ESV | Platinum |
| 2011-2014 | Cadillac | Escalade ESV | Premium |
| 2009-2013 | Cadillac | Escalade EXT | Base |
| 2011-2013 | Cadillac | Escalade EXT | Luxury |
| 2011-2013 | Cadillac | Escalade EXT | Premium |
| 2013 | Chevrolet | Avalanche | Black Diamond LS |
| 2013 | Chevrolet | Avalanche | Black Diamond LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LTZ |
| 2009-2012 | Chevrolet | Avalanche | LS |
| 2009-2012 | Chevrolet | Avalanche | LT |
| 2009-2012 | Chevrolet | Avalanche | LTZ |
| 2009-2013 | Chevrolet | Silverado 1500 | LS |
| 2009-2013 | Chevrolet | Silverado 1500 | LT |
| 2009-2013 | Chevrolet | Silverado 1500 | LTZ |
| 2009-2013 | Chevrolet | Silverado 1500 | WT |
| 2010-2013 | Chevrolet | Silverado 1500 | XFE |
| 2009-2014 | Chevrolet | Suburban 1500 | LS |
| 2009-2014 | Chevrolet | Suburban 1500 | LT |
| 2009-2014 | Chevrolet | Suburban 1500 | LTZ |
| 2009-2014 | Chevrolet | Tahoe | LS |
| 2009-2014 | Chevrolet | Tahoe | LT |
| 2009-2014 | Chevrolet | Tahoe | LTZ |
| 2009-2014 | Chevrolet | Tahoe | PPV |
| 2012-2014 | Chevrolet | Tahoe | SSV |
| 2009-2013 | GMC | Sierra 1500 | Denali |
| 2009-2013 | GMC | Sierra 1500 | SL |
| 2009-2013 | GMC | Sierra 1500 | SLE |
| 2009-2013 | GMC | Sierra 1500 | SLT |
| 2009-2013 | GMC | Sierra 1500 | WT |
| 2010-2013 | GMC | Sierra 1500 | XFE |
| 2009-2014 | GMC | Yukon | SLE |
| 2009-2014 | GMC | Yukon | SLT |
| 2009-2014 | GMC | Yukon XL 1500 | Denali |
| 2009-2014 | GMC | Yukon XL 1500 | SLE |
| 2009-2014 | GMC | Yukon XL 1500 | SLT |
$734.00
This massive 18” tall 360-degree radial flow air filter features our pre-oiled Black Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. This air filter is surrounded by expanded metal that provides additional protection, preventing filter collapse and direct impact. The included massive air filter is surrounded by an open-element orange XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. The housing incorporates both the factory hood air inlet scoop and the grille inlet using no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Our XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel T-bolt clamps are included for strength, and a premium silicone coupling allows for ample flexibility and durability. Momentum GT intakes are designed with fewer parts for a fast and easy installation.
Installation Instructions- Open Element Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet for Maximum Cold Air
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 60 Minutes)
- Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Black Pro 5R Air Filter for Maximum Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ram | 1500 | TRX |
$689.00
This massive 18” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. This air filter is surrounded by expanded metal that provides additional protection, preventing filter collapse and direct impact. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. The housing incorporates both the factory hood air inlet scoop and the grille inlet using no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Our XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel T-bolt clamps are included for strength, and a premium silicone coupling allows for ample flexibility and durability. Momentum GT intakes are designed with fewer parts for a fast and easy installation.
Installation Instructions- Open Element Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet for Maximum Cold Air
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 60 Minutes)
- Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ram | 1500 | TRX |
$399.00
This 9” tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's OE air inlet with no additional hardware. The built-in air intake scoop captures cold air directly from the top of the radiator support thanks to its huge opening. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel clamps are included for strength, and a premium silicone coupling allows for ample flexibility. Magnum Force intakes are designed with fewer parts for a fast and easy installation.
Installation Instructions- Housing with built-in air intake scoop to capture cold air directly from the top of radiator support
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and a Silicone Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2023-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
$387.00
This 7” tall 360-degree radial flow air filter features a 6-1/8” x 4-1/8” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Multiple air inlets bring in cool air when under power. The tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +25 HP & +26 Lbs. x Ft. TQ
- Measured Flow: 595 CFM @ 7” H20
- Outflows Factory Intake by 49%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2021 | Dodge | Durango | SRT |
| 2022-2024 | Dodge | Durango | SRT 392 |
| 2014-2021 | Jeep | Grand Cherokee | SRT |
| 2012-2013 | Jeep | Grand Cherokee | SRT8 |
$399.00
This 7” tall 360-degree radial flow air filter features a 6-1/8” x 4-1/8” oval flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Multiple air inlets bring in cool air when under power. The tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Proven Gains up to +17 HP & +18 Lbs. x Ft. TQ
- Measured Flow: 550 CFM @ 7” H20
- Outflows Factory Intake by 38%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2021 | Dodge | Durango | SRT |
| 2022-2024 | Dodge | Durango | SRT 392 |
| 2014-2021 | Jeep | Grand Cherokee | SRT |
| 2012-2013 | Jeep | Grand Cherokee | SRT8 |
$387.00
This 9” tall 360-degree radial flow air filter features a 5-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's OE air inlet with no additional hardware. The built-in air intake scoop captures cold air directly from the top of the radiator support thanks to its huge opening. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. Magnum Force intakes are designed with fewer parts for a fast and easy installation.
Installation Instructions- Housing with built-in air intake scoop to capture cold air directly from the top of radiator support
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +20 HP and +18 Lbs. x Ft. TQ
- Measured Flow: 785 CFM @ 7" H20
- Outflows Factory Intake by 59%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ford | Expedition | Active |
| 2022-2026 | Ford | Expedition | King Ranch |
| 2022-2024 | Ford | Expedition | Limited |
| 2025-2026 | Ford | Expedition | Max Active |
| 2022-2026 | Ford | Expedition | Max King Ranch |
| 2022-2024 | Ford | Expedition | Max Limited |
| 2022-2026 | Ford | Expedition | Max Platinum |
| 2022-2026 | Ford | Expedition | Max SSV |
| 2022 | Ford | Expedition | Max XL |
| 2022-2024 | Ford | Expedition | Max XLT |
| 2022-2026 | Ford | Expedition | Platinum |
| 2022-2026 | Ford | Expedition | SSV |
| 2022-2024 | Ford | Expedition | Timberline |
| 2025-2026 | Ford | Expedition | Tremor |
| 2022 | Ford | Expedition | XL |
| 2023-2024 | Ford | Expedition | XL STX |
| 2022-2024 | Ford | Expedition | XLT |
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
| 2022-2024 | Lincoln | Navigator | Base |
| 2022-2026 | Lincoln | Navigator | Black Label |
| 2022 | Lincoln | Navigator | L Base |
| 2022-2026 | Lincoln | Navigator | L Black Label |
| 2022-2026 | Lincoln | Navigator | L Livery |
| 2022-2026 | Lincoln | Navigator | L Reserve |
| 2022-2026 | Lincoln | Navigator | Reserve |
$399.00
This 9” tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's OE air inlet with no additional hardware. The built-in air intake scoop captures cold air directly from the top of the radiator support thanks to its huge opening. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. Magnum Force intakes are designed with fewer parts for a fast and easy installation
Installation Instructions- Housing with built-in air intake scoop to capture cold air directly from the top of radiator support
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Proven Gains up to +15 HP and +14 Lbs. x Ft. TQ
- Measured Flow: 730 CFM @ 7" H20
- Outflows Factory Intake by 47%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ford | Expedition | Active |
| 2022-2026 | Ford | Expedition | King Ranch |
| 2022-2024 | Ford | Expedition | Limited |
| 2025-2026 | Ford | Expedition | Max Active |
| 2022-2026 | Ford | Expedition | Max King Ranch |
| 2022-2024 | Ford | Expedition | Max Limited |
| 2022-2026 | Ford | Expedition | Max Platinum |
| 2022-2026 | Ford | Expedition | Max SSV |
| 2022 | Ford | Expedition | Max XL |
| 2022-2024 | Ford | Expedition | Max XLT |
| 2022-2026 | Ford | Expedition | Platinum |
| 2022-2026 | Ford | Expedition | SSV |
| 2022-2024 | Ford | Expedition | Timberline |
| 2025-2026 | Ford | Expedition | Tremor |
| 2022 | Ford | Expedition | XL |
| 2023-2024 | Ford | Expedition | XL STX |
| 2022-2024 | Ford | Expedition | XLT |
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
| 2022-2024 | Lincoln | Navigator | Base |
| 2022-2026 | Lincoln | Navigator | Black Label |
| 2022 | Lincoln | Navigator | L Base |
| 2022-2026 | Lincoln | Navigator | L Black Label |
| 2022-2026 | Lincoln | Navigator | L Livery |
| 2022-2026 | Lincoln | Navigator | L Reserve |
| 2022-2026 | Lincoln | Navigator | Reserve |
$387.00
This 9” tall 360-degree radial flow air filter features a 5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. The open design allows for easy viewing of the air filter and delivers an aggressive intake induction sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
- Dyno-Proven Gains up to +12 HP & +15 Lbs. x Ft. TQ
- Measured Flow: 525 CFM @ 7" H2O
- Outflows Factory Intake by 31%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Cadillac | Escalade | Base |
| 2015-2020 | Cadillac | Escalade | Luxury |
| 2015-2020 | Cadillac | Escalade | Platinum |
| 2015-2016 | Cadillac | Escalade | Premium |
| 2017-2020 | Cadillac | Escalade | Premium Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Base |
| 2015-2020 | Cadillac | Escalade ESV | Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Platinum |
| 2015-2016 | Cadillac | Escalade ESV | Premium |
| 2017-2020 | Cadillac | Escalade ESV | Premium Luxury |
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2014-2018 | Chevrolet | Silverado 1500 | LT |
| 2014-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2015-2018 | Chevrolet | Silverado 1500 | SSV |
| 2014-2018 | Chevrolet | Silverado 1500 | WT |
| 2019 | Chevrolet | Silverado 1500 LD | Custom |
| 2019 | Chevrolet | Silverado 1500 LD | LT |
| 2019 | Chevrolet | Silverado 1500 LD | WT |
| 2015-2020 | Chevrolet | Suburban | LS |
| 2015-2020 | Chevrolet | Suburban | LT |
| 2015-2016 | Chevrolet | Suburban | LTZ |
| 2017-2020 | Chevrolet | Suburban | Premier |
| 2015-2020 | Chevrolet | Tahoe | LS |
| 2015-2020 | Chevrolet | Tahoe | LT |
| 2015-2016 | Chevrolet | Tahoe | LTZ |
| 2015-2020 | Chevrolet | Tahoe | PPV |
| 2017-2020 | Chevrolet | Tahoe | Premier |
| 2015-2020 | Chevrolet | Tahoe | SSV |
| 2014-2018 | GMC | Sierra 1500 | Base |
| 2014-2018 | GMC | Sierra 1500 | Denali |
| 2014-2018 | GMC | Sierra 1500 | SLE |
| 2014-2018 | GMC | Sierra 1500 | SLT |
| 2019 | GMC | Sierra 1500 Limited | Base |
| 2019 | GMC | Sierra 1500 Limited | SLE |
| 2015-2020 | GMC | Yukon | Denali |
| 2015-2020 | GMC | Yukon | SLE |
| 2015-2020 | GMC | Yukon | SLT |
| 2015-2020 | GMC | Yukon XL | Denali |
| 2015-2020 | GMC | Yukon XL | SLE |
| 2015-2020 | GMC | Yukon XL | SLT |
$387.00
This 9” tall 360-degree radial flow air filter features a 5 IN flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filter is surrounded by an open-element XLPE (Cross-linked Polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. It utilizes the vehicles OE air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation InstructionsInstallation Instructions
- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Premium Stainless Steel Clamps and a Bellows Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Incorporates the Factory Air Inlet Scoop with No Additional Hardware
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +12 HP & +20 Lbs. x Ft. TQ
- Measured Flow: 710 CFM @ 7 IN H2O
- Outflows Factory Intake by 41%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | Chevrolet | Silverado 1500 | Custom |
| 2019-2026 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | High Country |
| 2019-2026 | Chevrolet | Silverado 1500 | LT |
| 2019-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2023-2026 | Chevrolet | Silverado 1500 | PPV |
| 2019-2026 | Chevrolet | Silverado 1500 | RST |
| 2019-2021 | Chevrolet | Silverado 1500 | SSV |
| 2019-2026 | Chevrolet | Silverado 1500 | WT |
| 2021-2024 | Chevrolet | Suburban | Commercial |
| 2021-2026 | Chevrolet | Suburban | LS |
| 2021-2026 | Chevrolet | Suburban | LT |
| 2021-2026 | Chevrolet | Suburban | Premier |
| 2021-2026 | Chevrolet | Suburban | RST |
| 2021-2026 | Chevrolet | Suburban | Z71 |
| 2022-2026 | Chevrolet | Tahoe | Commercial |
| 2021-2026 | Chevrolet | Tahoe | LS |
| 2021-2026 | Chevrolet | Tahoe | LT |
| 2021-2026 | Chevrolet | Tahoe | PPV |
| 2021-2026 | Chevrolet | Tahoe | Premier |
| 2021-2026 | Chevrolet | Tahoe | RST |
| 2021-2026 | Chevrolet | Tahoe | SSV |
| 2021-2026 | Chevrolet | Tahoe | Z71 |
| 2019-2021 | GMC | Sierra 1500 | AT4 |
| 2019-2021 | GMC | Sierra 1500 | Base |
| 2019-2026 | GMC | Sierra 1500 | Denali |
| 2019-2026 | GMC | Sierra 1500 | Elevation |
| 2022-2026 | GMC | Sierra 1500 | Pro |
| 2019-2026 | GMC | Sierra 1500 | SLE |
| 2019-2026 | GMC | Sierra 1500 | SLT |
| 2021-2026 | GMC | Yukon | AT4 |
| 2025-2026 | GMC | Yukon | Elevation |
| 2021-2024 | GMC | Yukon | SLE |
| 2021-2024 | GMC | Yukon | SLT |
| 2021-2026 | GMC | Yukon XL | AT4 |
| 2025-2026 | GMC | Yukon XL | Elevation |
| 2021-2024 | GMC | Yukon XL | SLE |
| 2021-2024 | GMC | Yukon XL | SLT |
$387.00
This 9 IN tall 360-degree radial flow air filter features a 5 IN flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filter is surrounded by an open-element XLPE (Cross-linked Polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. It utilizes the vehicles OE air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Premium Stainless Steel Clamps and a Bellows Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Incorporates the Factory Air Inlet Scoop with No Additional Hardware
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | Chevrolet | Silverado 1500 | Custom |
| 2019-2021 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2021 | Chevrolet | Silverado 1500 | WT |
| 2019-2021 | GMC | Sierra 1500 | Base |
$71.00
Magnum Force Cold Air Intake System Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Ford Ranger. It is designed to capture the coolest, freshest air from the top of the front grille to ensure increased air velocity into your air intake system. This Dynamic Air Scoop guides cool ambient air from outside the vehicle directly into your intake system. The cool dense air allows your vehicle to run more efficiently, increasing performance. This D.A.S. is constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable. The 54-13056SR Dynamic Air Scoop fits the factory systems, as well as aFe POWER’s Quantum intakes. This part easily snaps into the air box and requires no modification to your vehicle.
Installation Instructions- This Dynamic Air Scoop (D.A.S.) increases the amount of cool, dense airflow delivered to your air intake system for maximum performance and quicker throttle response.
- Quickly Snaps Into Air Box and reuses the 2 factory securing screws for a Hassle-Free Installation
- Designed to fit factory intakes as well as aFe POWER's Quantum intakes
- Durable, Impact-Resistant LLDPE Polymer Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2023 | Ford | Ranger | Lariat |
| 2019-2023 | Ford | Ranger | XL |
| 2019-2023 | Ford | Ranger | XLT |
$60.00
Magnum Force Cold Air Intake System Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Ford Ranger. It is designed to capture the coolest, freshest air from the top of the front grille to ensure increased air velocity into your air intake system. This Dynamic Air Scoop guides cool ambient air from outside the vehicle directly into your intake system. The cool dense air allows your vehicle to run more efficiently, increasing performance. This D.A.S. is constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable. The 54-13056S Dynamic Air Scoop fits the factory systems, as well as aFe POWER’s Quantum intakes. This part easily snaps into the air box and requires no modification to your vehicle.
Installation Instructions- This Dynamic Air Scoop (D.A.S.) increases the amount of cool, dense airflow delivered to your air intake system for maximum performance and quicker throttle response.
- Quickly Snaps Into Air Box and reuses the 2 factory securing screws for a Hassle-Free Installation
- Designed to fit factory intakes as well as aFe POWER's Quantum intakes
- Durable, Impact-Resistant LLDPE Polymer Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2023 | Ford | Ranger | Lariat |
| 2019-2023 | Ford | Ranger | XL |
| 2019-2023 | Ford | Ranger | XLT |
$581.00
Dual 4” Flange 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, and in most cases deliver the highest power gains of our filter media options. This media is perfect for street and/or track use. Their inverted tops make for more filter surface area, resulting in longer service intervals. The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. Silicone bellow couplings are used for engine movement and easy installation. All the factory harness and mounts are transferred to the back of the aFe POWER housing for a factory-like installation. The radio antenna plastic melded on the factory air box is also transferred to the aFe POWER housing. The removal of the antenna from the factory air box requires two plastic melted mounting tabs to be cut off. This system features a high-quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. The seal trim installed on the housing edge seals to the plastic trunk cover to protect the air filters from unwanted warm engine air. This setup allows for more aggressive air intake noise while not sacrificing any performance. Premium stainless-steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.
Installation Instructions- Housing seals to the trunk cover to protect air filters from unwanted engine heat
- Heat resistant housing that enclosed the dual air filter set up
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
- Dual 360-degree radial flow performance air filters
- Premium silicone couplings and hardware
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2026 | Chevrolet | Corvette | Stingray |
$399.00
This 7” tall 360-degree radial flow air filter features a 4” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and/or track use. The included performance air filter is surrounded by an open-element cross-link polyethylene (XLPE) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It connects to the vehicle’s factory air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. A specially designed bellows coupling is included with this kit to ensure the perfect seal and fitment to the factory throttle body. Throttle body spacer 46-31011 will fit with this air intake system. Fits both active and non-active steering.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Connects to the Factory Air Inlet Scoop with No Additional Hardware
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains of +10 HP and +8 Lbs. x Ft. TQ
- Measured Flow: 505 CFM @ 7” H20
- Outflows Factory Intake by 84%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2013 | BMW | 128i | Base |
| 2006 | BMW | 325i | Base |
| 2006 | BMW | 325xi | Base |
| 2007-2013 | BMW | 328i | Base |
| 2009-2013 | BMW | 328i xDrive | Base |
| 2007-2008 | BMW | 328xi | Base |
| 2006 | BMW | 330i | Base |
| 2006 | BMW | 330xi | Base |
$376.00
This 360-degree radial flow air filter features a 3.5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features an aFe Power design inspired by European vehicles. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It’s design incorporates the OEM air scoop to ensure that it gets the coldest air available. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our unique filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Included billet aluminum fittings allows stock connections to transfer over seamlessly.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- One-Piece Housing With Integrated Air Scoop to Capture the Coldest Air Possible
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Proven Gains up to +12 HP & +12 Lbs. x Ft. TQ
- Measured Flow: 320 CFM @ 7” H20
- Outflows Factory Intake by 19%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Audi | A3 | Premium |
| 2015-2020 | Audi | A3 | Premium Plus |
| 2015-2019 | Audi | A3 | Prestige |
| 2019 | Audi | A3 | Titanium |
| 2015-2020 | Audi | A3 Quattro | Premium |
| 2015-2020 | Audi | A3 Quattro | Premium Plus |
| 2015-2019 | Audi | A3 Quattro | Prestige |
| 2020 | Audi | S3 | Premium |
| 2015-2020 | Audi | S3 | Premium Plus |
| 2015-2019 | Audi | S3 | Prestige |
| 2020 | Audi | S3 | Progressiv |
| 2016 | Volkswagen | Golf | Base |
| 2015 | Volkswagen | Golf | Launch Edition |
| 2015-2018 | Volkswagen | Golf | S |
| 2015-2016,2018 | Volkswagen | Golf | SE |
| 2015-2016 | Volkswagen | Golf | SEL |
| 2017 | Volkswagen | Golf | Wolfsburg Edition |
| 2015-2019 | Volkswagen | Golf R | Base |
| 2015-2021 | Volkswagen | GTI | Autobahn |
| 2019 | Volkswagen | GTI | Rabbit Edition |
| 2015-2021 | Volkswagen | GTI | S |
| 2015-2021 | Volkswagen | GTI | SE |
| 2017 | Volkswagen | GTI | Sport |
| 2019 | Volkswagen | Jetta | GLI 35th Anniversary Edition |
| 2024 | Volkswagen | Jetta | GLI 40th Anniversary Edition |
| 2019-2026 | Volkswagen | Jetta | GLI Autobahn |
| 2019-2021 | Volkswagen | Jetta | GLI S |
$365.00
This 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It’s design incorporates the OEM air scoop to ensure that it gets the coldest air available.This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our unique filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Included billet aluminum fittings allows stock connections to transfer over seamlessly.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- One-Piece Housing With Integrated Air Scoop to Capture the Coldest Air Possible
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +5 HP & +5 Lbs. x Ft. TQ
- Measured Flow: 230 CFM @ 7” H20
- Outflows Factory Intake by 10%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | Volkswagen | Jetta | R-Line |
| 2019-2021 | Volkswagen | Jetta | S |
| 2019-2021 | Volkswagen | Jetta | SE |
| 2019-2021 | Volkswagen | Jetta | SEL |
| 2019-2021 | Volkswagen | Jetta | SEL Premium |
$376.00
This 360-degree radial flow air filter features a 3.5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It’s design incorporates the OEM air scoop to ensure that it gets the coldest air available. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our unique filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Included billet aluminum fittings allows stock connections to transfer over seamlessly.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- One-Piece Housing With Integrated Air Scoop to Capture the Coldest Air Possible
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Proven Gains up to +6 HP & +6 Lbs. x Ft. TQ
- Measured Flow: 220 CFM @ 7” H20
- Outflows Factory Intake by 5%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | Volkswagen | Jetta | R-Line |
| 2019-2021 | Volkswagen | Jetta | S |
| 2019-2021 | Volkswagen | Jetta | SE |
| 2019-2021 | Volkswagen | Jetta | SEL |
| 2019-2021 | Volkswagen | Jetta | SEL Premium |
$387.00
This 9” tall 360-degree radial flow air filter features a 5" round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (Cross-linked Polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicles OE air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system.
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Incorporates the Factory Air Inlet Scoop with No Additional Hardware
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +22 HP and +25 Lbs. x Ft. TQ
- Measured Flow: 590 CFM @ 7” H20
- Outflows Factory Intake by 37%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2025 | Ram | 2500 | Big Horn |
| 2019-2025 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2019-2025 | Ram | 2500 | Lone Star |
| 2019-2025 | Ram | 2500 | Power Wagon |
| 2023-2025 | Ram | 2500 | Rebel |
| 2024-2025 | Ram | 2500 | Special Service |
| 2019-2025 | Ram | 2500 | Tradesman |
| 2019-2025 | Ram | 3500 | Big Horn |
| 2019-2025 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2019-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2019-2025 | Ram | 3500 | Tradesman |
$399.00
This 9” tall 360-degree radial flow air filter features a 5" round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (Cross-linked Polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicles OE air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system.
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Incorporates the Factory Air Inlet Scoop with No Additional Hardware
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Proven Gains up to +25 HP and +29 Lbs. x Ft. TQ
- Measured Flow: 565 CFM @ 7” H20
- Outflows Factory Intake by 31%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2025 | Ram | 2500 | Big Horn |
| 2019-2025 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2019-2025 | Ram | 2500 | Lone Star |
| 2019-2025 | Ram | 2500 | Power Wagon |
| 2023-2025 | Ram | 2500 | Rebel |
| 2024-2025 | Ram | 2500 | Special Service |
| 2019-2025 | Ram | 2500 | Tradesman |
| 2019-2025 | Ram | 3500 | Big Horn |
| 2019-2025 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2019-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2019-2025 | Ram | 3500 | Tradesman |
Showing 630/1976
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.