Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1974 products
1974 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$399.00
Large Three Layer Performance Air Filter: This 9 IN tall 360-degree radial flow air filter features a 5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. It utilizes the vehicle's OE air inlet with no additional hardware.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. A custom, high-temperature silicone bellows coupling mates the tube directly to the vehicle's turbo.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Innovative Filter-to-Housing Interface for Easy Installation
- Seals to hood when closed to reduce intake air temperature
- Measured Flow: 490 CFM @ 7" H20
- Outflows Factory Intake by 15%
- +18lbs. x ft. TQ & +7 HP
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 2500 | Big Horn |
| 2019-2024 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2024 | Ram | 2500 | Limited |
| 2021-2024 | Ram | 2500 | Limited Longhorn |
| 2019-2024 | Ram | 2500 | Lone Star |
| 2023-2024 | Ram | 2500 | Rebel |
| 2024 | Ram | 2500 | Special Service |
| 2019-2024 | Ram | 2500 | Tradesman |
| 2019-2024 | Ram | 3500 | Big Horn |
| 2019-2024 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2024 | Ram | 3500 | Limited |
| 2021-2024 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2019-2024 | Ram | 3500 | SLT |
| 2024 | Ram | 3500 | Special Service |
| 2019-2024 | Ram | 3500 | Tradesman |
$387.00
This 7” tall 360-degree radial flow air filter features a 4" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It connects to the factory air intake tract in the fender well. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features a resonance chamber to reduce drone and billet aluminum fittings to perfectly connect your vehicle's vacuum line. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary stainless-steel clamps, flexible bellows coupling, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Utilizes Factory Mounting Locations for a Fast and Easy Installation (Roughly 30 Minutes)
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +17 HP & +16 Lbs. x Ft. TQ
- Measured Flow: 685 CFM @ 7" H2O
- Outflows Factory Intake by 41%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Chevrolet | Corvette | Grand Sport |
| 2014-2019 | Chevrolet | Corvette | Stingray |
$365.00
This 7” tall 360-degree radial flow air filter features a 6" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. It utilizes the vehicle's OE air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. In addition to featuring all necessary fittings for the stock connections, it's the first tube designed with a molded version of our motorsport-inspired logo. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our innovative filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (~ 30 Min.)
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- No Tuning Required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | Mustang | Bullitt |
| 2018-2023 | Ford | Mustang | GT |
| 2018-2021 | Ford | Mustang | GT Premium |
| 2021 | Ford | Mustang | Mach 1 |
$387.00
Large Five Layer Performance Air Filter:This 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +12 HP & +20 Lbs. x Ft. TQ
- Incorporates the Factory Air Inlet Scoop
- Measured Flow: 710 CFM @ 7" H2O
- Outflows Factory Intake by 41%
- Open-Element Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2026 | Cadillac | Escalade | Base |
| 2021-2026 | Cadillac | Escalade | Luxury |
| 2026 | Cadillac | Escalade | Platinum Luxury |
| 2026 | Cadillac | Escalade | Platinum Sport |
| 2021-2025 | Cadillac | Escalade | Premium Luxury |
| 2021-2025 | Cadillac | Escalade | Premium Luxury Platinum |
| 2021-2026 | Cadillac | Escalade | Sport |
| 2021-2025 | Cadillac | Escalade | Sport Platinum |
| 2023-2026 | Cadillac | Escalade | V |
| 2026 | Cadillac | Escalade ESV | Base |
| 2021-2026 | Cadillac | Escalade ESV | Luxury |
| 2026 | Cadillac | Escalade ESV | Platinum Luxury |
| 2026 | Cadillac | Escalade ESV | Platinum Sport |
| 2021-2025 | Cadillac | Escalade ESV | Premium Luxury |
| 2021-2025 | Cadillac | Escalade ESV | Premium Luxury Platinum |
| 2021-2026 | Cadillac | Escalade ESV | Sport |
| 2021-2025 | Cadillac | Escalade ESV | Sport Platinum |
| 2023-2026 | Cadillac | Escalade ESV | V |
| 2019-2020 | Chevrolet | Silverado 1500 | Custom |
| 2020-2021,2023 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | High Country |
| 2019-2020 | Chevrolet | Silverado 1500 | LT |
| 2020-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2020-2026 | Chevrolet | Silverado 1500 | RST |
| 2019-2020 | Chevrolet | Silverado 1500 | SSV |
| 2019-2020 | Chevrolet | Silverado 1500 | WT |
| 2022-2026 | Chevrolet | Silverado 1500 | ZR2 |
| 2021-2026 | Chevrolet | Suburban | High Country |
| 2022-2026 | Chevrolet | Suburban | Premier |
| 2022-2026 | Chevrolet | Suburban | RST |
| 2022-2026 | Chevrolet | Suburban | Z71 |
| 2021-2026 | Chevrolet | Tahoe | High Country |
| 2022-2026 | Chevrolet | Tahoe | Premier |
| 2022-2026 | Chevrolet | Tahoe | RST |
| 2022-2026 | Chevrolet | Tahoe | Z71 |
| 2019-2026 | GMC | Sierra 1500 | AT4 |
| 2022-2026 | GMC | Sierra 1500 | AT4X |
| 2019-2020 | GMC | Sierra 1500 | Base |
| 2019-2026 | GMC | Sierra 1500 | Denali |
| 2022-2026 | GMC | Sierra 1500 | Denali Ultimate |
| 2019-2020 | GMC | Sierra 1500 | SLE |
| 2019-2026 | GMC | Sierra 1500 | SLT |
| 2022-2026 | GMC | Yukon | AT4 |
| 2025-2026 | GMC | Yukon | AT4 Ultimate |
| 2021-2026 | GMC | Yukon | Denali |
| 2023-2026 | GMC | Yukon | Denali Ultimate |
| 2022-2026 | GMC | Yukon XL | AT4 |
| 2025-2026 | GMC | Yukon XL | AT4 Ultimate |
| 2021-2026 | GMC | Yukon XL | Denali |
| 2023-2026 | GMC | Yukon XL | Denali Ultimate |
$399.00
Large Three Layer Performance Air Filter:This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +8 HP & +14 Lbs. x Ft. TQ
- Incorporates the Factory Air Inlet Scoop
- Measured Flow: 685 CFM @ 7" H2O
- Outflows Factory Intake by 36%
- Open-Element Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2026 | Cadillac | Escalade | Base |
| 2021-2026 | Cadillac | Escalade | Luxury |
| 2026 | Cadillac | Escalade | Platinum Luxury |
| 2026 | Cadillac | Escalade | Platinum Sport |
| 2021-2025 | Cadillac | Escalade | Premium Luxury |
| 2021-2025 | Cadillac | Escalade | Premium Luxury Platinum |
| 2021-2026 | Cadillac | Escalade | Sport |
| 2021-2025 | Cadillac | Escalade | Sport Platinum |
| 2023-2026 | Cadillac | Escalade | V |
| 2026 | Cadillac | Escalade ESV | Base |
| 2021-2026 | Cadillac | Escalade ESV | Luxury |
| 2026 | Cadillac | Escalade ESV | Platinum Luxury |
| 2026 | Cadillac | Escalade ESV | Platinum Sport |
| 2021-2025 | Cadillac | Escalade ESV | Premium Luxury |
| 2021-2025 | Cadillac | Escalade ESV | Premium Luxury Platinum |
| 2021-2026 | Cadillac | Escalade ESV | Sport |
| 2021-2025 | Cadillac | Escalade ESV | Sport Platinum |
| 2023-2026 | Cadillac | Escalade ESV | V |
| 2019-2020 | Chevrolet | Silverado 1500 | Custom |
| 2020-2021,2023 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | High Country |
| 2019-2020 | Chevrolet | Silverado 1500 | LT |
| 2020-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2020-2026 | Chevrolet | Silverado 1500 | RST |
| 2019-2020 | Chevrolet | Silverado 1500 | SSV |
| 2019-2020 | Chevrolet | Silverado 1500 | WT |
| 2022-2026 | Chevrolet | Silverado 1500 | ZR2 |
| 2021-2026 | Chevrolet | Suburban | High Country |
| 2022-2026 | Chevrolet | Suburban | Premier |
| 2022-2026 | Chevrolet | Suburban | RST |
| 2022-2026 | Chevrolet | Suburban | Z71 |
| 2021-2026 | Chevrolet | Tahoe | High Country |
| 2022-2026 | Chevrolet | Tahoe | Premier |
| 2022-2026 | Chevrolet | Tahoe | RST |
| 2022-2026 | Chevrolet | Tahoe | Z71 |
| 2019-2026 | GMC | Sierra 1500 | AT4 |
| 2022-2026 | GMC | Sierra 1500 | AT4X |
| 2019-2020 | GMC | Sierra 1500 | Base |
| 2019-2026 | GMC | Sierra 1500 | Denali |
| 2022-2026 | GMC | Sierra 1500 | Denali Ultimate |
| 2019-2020 | GMC | Sierra 1500 | SLE |
| 2019-2026 | GMC | Sierra 1500 | SLT |
| 2022-2026 | GMC | Yukon | AT4 |
| 2025-2026 | GMC | Yukon | AT4 Ultimate |
| 2021-2026 | GMC | Yukon | Denali |
| 2023-2026 | GMC | Yukon | Denali Ultimate |
| 2022-2026 | GMC | Yukon XL | AT4 |
| 2025-2026 | GMC | Yukon XL | AT4 Ultimate |
| 2021-2026 | GMC | Yukon XL | Denali |
| 2023-2026 | GMC | Yukon XL | Denali Ultimate |
$399.00
This 7” tall 360-degree radial flow air filter features a 4" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that pulls in air from the front of the vehicle and minimizes warm engine air, for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
- Deliver more cool air to your BMW's engine and reap the reward of better performance and an aggressive, but not overpowering, turbo whistle.
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +11 HP & +21 Lbs. x Ft. TQ
- Measured Flow: 650 CFM @ 7" H2O
- Outflows Factory Intake by 44%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2015 | BMW | 335i | Base |
| 2013-2015 | BMW | 335i xDrive | Base |
| 2014-2016 | BMW | 435i | Base |
| 2015-2016 | BMW | 435i Gran Coupe | Base |
| 2014-2016 | BMW | 435i xDrive | Base |
| 2015-2016 | BMW | 435i xDrive Gran Coupe | Base |
| 2016-2018 | BMW | M2 | Base |
| 2014-2016 | BMW | M235i | Base |
| 2015-2016 | BMW | M235i xDrive | Base |
$410.00
This 7” tall 360-degree radial flow air filter features a 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use.The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that pulls in air from the front of the vehicle and minimizes warm engine air, for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
- Deliver more cool air to your BMW's engine and reap the reward of better performance and an aggressive, but not overpowering, turbo whistle.
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Proven Gains up to +7 HP & +14 Lbs. x Ft. TQ
- Measured Flow: 605 CFM @ 7" H2O
- Outflows Factory Intake by 34%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2015 | BMW | 335i | Base |
| 2013-2015 | BMW | 335i xDrive | Base |
| 2014-2016 | BMW | 435i | Base |
| 2015-2016 | BMW | 435i Gran Coupe | Base |
| 2014-2016 | BMW | 435i xDrive | Base |
| 2015-2016 | BMW | 435i xDrive Gran Coupe | Base |
| 2016-2018 | BMW | M2 | Base |
| 2014-2016 | BMW | M235i | Base |
| 2015-2016 | BMW | M235i xDrive | Base |
$112.00
Lower Intake Air Temperatures: These Dynamic Air Scoops lower air intake temperatures by forcing more cool air from behind the front grilles into the factory intake tracts. Durable LLDPE Construction: They are constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable. Their blue color adds a colorful accent visible behind the vehicle's kidney grilles. Hassle-Free Installation: These air scoops are installed through the front kidney grille openings and are secured to the reinforcement support bar with the included plastic push-in rivets. They sit right in front of the radiator and are designed to fit with the factory radiator. No modifications are required for installation with factory and aFe POWER intake systems.
Installation Instructions- Reduces air temperature flowing into your intake system
- Works with factory and aFe POWER intake systems
- Improves performance and throttle response
- CAD Designed for the perfect fit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2018 | BMW | M3 | Base |
| 2015-2020 | BMW | M4 | Base |
| 2019-2020 | BMW | M4 | CS |
| 2016 | BMW | M4 | GTS |
$100.00
Lower Intake Air Temperatures: These Dynamic Air Scoops lower air intake temperatures by forcing more cool air from behind the front grilles into the factory intake tracts. Durable LLDPE Construction: They are constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable. Hassle-Free Installation: These air scoops are installed through the front kidney grille openings and are secured to the reinforcement support bar with the included plastic push-in rivets. They sit right in front of the radiator and are designed to fit with the factory radiator. No modifications are required for installation with factory and aFe POWER intake systems.
Installation Instructions- Reduces air temperature flowing into your intake system
- Works with factory and aFe POWER intake systems
- Improves performance and throttle response
- CAD Designed for the perfect fit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2018 | BMW | M3 | Base |
| 2015-2020 | BMW | M4 | Base |
| 2019-2020 | BMW | M4 | CS |
| 2016 | BMW | M4 | GTS |
$593.00
These 6" tall 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. This media provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases, making it perfect for street and/or track use. Their inverted top makes for more filter surface area, resulting in longer service intervals. The included high-performance air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. Their open design allows for easy viewing of the air filters and delivers an aggressive Air Intake sound. They utilize the vehicle's factory air inlet with no additional hardware. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their black XLPE material is heat soak resistant and extremely durable. The longer tube passing in front of the engine features aluminum trim, securing the coolant hose and giving a unique look to your engine bay. An optional carbon fiber trim piece can be purchased separately (PN 54-13032CC). This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Open-Element Design Showcases the Air Filters and Delivers an Aggressive Air Intake Sound
- Brushed Aluminum Accent on Intake Tube Makes for a Unique Look Under the Hood
- Washable and Reusable Pro 5R Air Filters for Maximum Performance
- Dyno-Proven Gains up to +25 HP & +23 Lbs. x Ft. TQ
- Measured Flow: 815 CFM @ 7" H2O
- Outflows Factory Intake by 41%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | BMW | M2 | Competition |
| 2015-2018 | BMW | M3 | Base |
| 2015-2020 | BMW | M4 | Base |
| 2019-2020 | BMW | M4 | CS |
| 2016 | BMW | M4 | GTS |
$619.00
These 6" tall 360-degree radial flow air filters feature our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Their inverted top makes for more filter surface area, resulting in longer service intervals. The included high-performance air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. Their open design allows for easy viewing of the air filters and delivers an aggressive Air Intake sound. They utilize the vehicle's factory air inlet with no additional hardware. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their black XLPE material is heat soak resistant and extremely durable. The longer tube passing in front of the engine features aluminum trim, securing the coolant hose and giving a unique look to your engine bay. An optional carbon fiber trim piece can be purchased separately (PN 54-13032CC). This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Open-Element Design Showcases the Air Filters and Delivers an Aggressive Air Intake Sound
- Brushed Aluminum Accent on Intake Tube Makes for a Unique Look Under the Hood
- Washable and Reusable Pro DRY S Air Filters for Maximum Convenience
- Dyno-Proven Gains up to +19 HP & +17 Lbs. x Ft. TQ
- Measured Flow: 765 CFM @ 7" H2O
- Outflows Factory Intake by 32%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | BMW | M2 | Competition |
| 2015-2018 | BMW | M3 | Base |
| 2015-2020 | BMW | M4 | Base |
| 2019-2020 | BMW | M4 | CS |
| 2016 | BMW | M4 | GTS |
$646.00
These 360-degree radial flow air filters feature a 4" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air and deliver the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. Their open design allows for easy viewing of their air filters and delivers an aggressive Air Intake sound. In addition to the system's built-in air inlets, optional Dynamic Air Scoops (sold separately) are available to bring more cool air from the front of the vehicle into the intake housing (PN 54-12489-C). This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Open-Element Design Showcases the Air Filters and Delivers an Aggressive Air Intake Sound
- Optional Carbon Fiber Scoops Can be Used to Bring in Additional Cool Air
- Washable and Reusable Pro 5R Air Filters for Maximum Performance
- Dyno-Proven Gains up to +31 HP & +26 Lbs. x Ft. TQ
- Measured Flow: 595 CFM @ 7" H2O
- Outflows Factory Intake by 19%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2016 | BMW | M5 | Base |
| 2012-2018 | BMW | M6 | Base |
| 2014-2019 | BMW | M6 Gran Coupe | Base |
$660.00
These 360-degree radial flow air filters feature a 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. The included massive air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. Their open design allows for easy viewing of their air filters and delivers an aggressive Air Intake sound. In addition to the system's built-in air inlets, optional Dynamic Air Scoops (sold separately) are available to bring more cool air from the front of the vehicle into the intake housing (PN 54-12489-C).This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Open-Element Design Showcases the Air Filters and Delivers an Aggressive Air Intake Sound
- Optional Carbon Fiber Scoops Can be Used to Bring in Additional Cool Air
- Washable and Reusable Pro DRY S Air Filters for Maximum Convenience
- Dyno-Proven Gains up to +19 HP & +16 Lbs. x Ft. TQ
- Measured Flow: 580 CFM @ 7" H2O
- Outflows Factory Intake by 16%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2016 | BMW | M5 | Base |
| 2012-2018 | BMW | M6 | Base |
| 2014-2019 | BMW | M6 Gran Coupe | Base |
$387.00
This 9” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use with an optional Dynamic Air Scoop, or can be closed with an included plug if desired. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. All necessary hardware (including seal trim, stainless-steel clamps, and heat-resistant couplings) is included. An optional Dynamic Air Scoop (sold separately - PN 54-76105-S) is available to bring more cool air from the front of the vehicle into the intake housing.
Installation Instructions- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation (Roughly 15 Minutes)
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Utilizes Factory Air Inlet and Can be Used with Optional Dynamic Air Scoop (DAS)
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Nissan | TITAN XD | Platinum Reserve |
| 2016-2019 | Nissan | TITAN XD | PRO-4X |
| 2016-2019 | Nissan | TITAN XD | S |
| 2016-2019 | Nissan | TITAN XD | SL |
| 2016-2019 | Nissan | TITAN XD | SV |
$399.00
Large Three Layer Performance Air Filter:This 9” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing:The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use with an optional Dynamic Air Scoop, or can be closed with an included plug if desired.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation:This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. All necessary hardware (including seal trim, stainless-steel clamps, and heat-resistant couplings) is included.
Installation Instructions- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Utilizes OE Air Inlet and Can be Used with Optional Dynamic Air Scoop (DAS)
- Washable and Reusable Pro DRY S Air Filter for Life-Long Convenience
- Dyno-Proven Gains up to +15 HP and +37 Lbs. x Ft. TQ
- Measured Flow: 670 CFM @ 7" H2O
- Outflows Factory Intake by 37%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Nissan | TITAN XD | Platinum Reserve |
| 2016-2019 | Nissan | TITAN XD | PRO-4X |
| 2016-2019 | Nissan | TITAN XD | S |
| 2016-2019 | Nissan | TITAN XD | SL |
| 2016-2019 | Nissan | TITAN XD | SV |
$354.00
A large 7" conical filter with a 3.5" flange opening provides 44% greater airflow over the stock intake system. This washable/reusable, 5-layer, progressively finer, mesh cotton gauze, oiled media, air filter provides maximum airflow and performance. aFe POWER snap-on heat shield replaces the top of the factory air box to provide a hassle-free installation while maintaining factory mounting locations. This system uses a CAD-modeled, dyno-tuned, roto-molded intake tube to achieve maximum power gains while ensuring a perfect fit.
Installation InstructionsMaterial Safety Data Sheet
Material Safety Data Sheet
- Enjoy lifelong performance with an included washable and reusable Pro 5R air filter
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Ford | Explorer | Platinum |
| 2013-2019 | Ford | Explorer | Sport |
| 2010-2019 | Ford | Flex | Limited |
| 2010-2011 | Ford | Flex | SEL |
| 2011-2012 | Ford | Flex | Titanium |
| 2010-2019 | Ford | Taurus | SHO |
| 2010-2016 | Lincoln | MKS | EcoBoost |
$365.00
Large Air Filter: A large 7" conical filter with a 3.5" flange opening provides 40% greater airflow over the stock intake system. This washable/reusable, 3-layer, progressively finer porosity, synthetic media provides maximum airflow and performance.Top Mounted Heat Shield Design: aFe Power's snap-on heat shield replaces the top of the factory air box to provide a hassle-free installation while maintaining factory mounting locations.Roto-molded Tube: This system uses a CAD-modeled, dyno-tuned, roto-molded intake tube to achieve maximum power gains while ensuring a perfect fit.
Installation InstructionsMaterial Safety Data Sheet
- Enjoy lifelong performance with an included washable and reusable Pro DRY S air filter
- +2 lbs. x ft. TQ & +7 HP
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Ford | Explorer | Platinum |
| 2013-2019 | Ford | Explorer | Sport |
| 2010-2019 | Ford | Flex | Limited |
| 2010-2011 | Ford | Flex | SEL |
| 2011-2012 | Ford | Flex | Titanium |
| 2010-2019 | Ford | Taurus | SHO |
| 2010-2016 | Lincoln | MKS | EcoBoost |
$387.00
This 7" tall 360-degree radial flow air filter features a large 5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air when under power, or can be closed with an included plug if desired. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system
- This Stage-2's open-element design puts your HEMI in the spotlight. Its massive air filter draws attention when the hood is open and, when under power in Sport mode, it unleashes an aggressive tone.
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +19 HP and +20 Lbs. x Ft. TQ
- Measured Flow: 700 CFM @ 7" H2O
- Outflows Factory Intake by 56%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2024 | Dodge | Durango | Citadel |
| 2011-2013 | Dodge | Durango | Crew |
| 2018 | Dodge | Durango | GT |
| 2014-2015 | Dodge | Durango | Limited |
| 2018-2026 | Dodge | Durango | Pursuit |
| 2011-2026 | Dodge | Durango | R/T |
| 2022-2023 | Dodge | Durango | R/T Hemi Orange |
| 2022-2026 | Dodge | Durango | R/T Plus |
| 2023-2026 | Dodge | Durango | R/T Premium |
| 2012-2026 | Dodge | Durango | Special Service |
| 2018 | Dodge | Durango | SXT |
| 2018-2020 | Jeep | Grand Cherokee | High Altitude |
| 2011-2013 | Jeep | Grand Cherokee | Laredo |
| 2011-2021 | Jeep | Grand Cherokee | Limited |
| 2019-2021 | Jeep | Grand Cherokee | Limited X |
| 2011-2021 | Jeep | Grand Cherokee | Overland |
| 2012 | Jeep | Grand Cherokee | Overland Summit |
| 2014-2021 | Jeep | Grand Cherokee | Summit |
| 2017-2021 | Jeep | Grand Cherokee | Trailhawk |
$399.00
This 7" tall 360-degree radial flow air filter features a large 5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air when under power, or can be closed with an included plug if desired. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
- This Stage-2's open-element design puts your HEMI in the spotlight. Its massive air filter draws attention when the hood is open and, when under power in Sport mode, it unleashes an aggressive tone.
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Proven Gains up to +17 HP and +18 Lbs. x Ft. TQ
- Measured Flow: 650 CFM @ 7" H2O
- Outflows Factory Intake by 44%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2024 | Dodge | Durango | Citadel |
| 2011-2013 | Dodge | Durango | Crew |
| 2018 | Dodge | Durango | GT |
| 2014-2015 | Dodge | Durango | Limited |
| 2018-2026 | Dodge | Durango | Pursuit |
| 2011-2026 | Dodge | Durango | R/T |
| 2022-2023 | Dodge | Durango | R/T Hemi Orange |
| 2022-2026 | Dodge | Durango | R/T Plus |
| 2023-2026 | Dodge | Durango | R/T Premium |
| 2012-2026 | Dodge | Durango | Special Service |
| 2018 | Dodge | Durango | SXT |
| 2018-2020 | Jeep | Grand Cherokee | High Altitude |
| 2011-2013 | Jeep | Grand Cherokee | Laredo |
| 2011-2021 | Jeep | Grand Cherokee | Limited |
| 2019-2021 | Jeep | Grand Cherokee | Limited X |
| 2011-2021 | Jeep | Grand Cherokee | Overland |
| 2012 | Jeep | Grand Cherokee | Overland Summit |
| 2014-2021 | Jeep | Grand Cherokee | Summit |
| 2017-2021 | Jeep | Grand Cherokee | Trailhawk |
$354.00
This intake system utilizes an oil free, 7" tall flat top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. This system uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. A plastic injected fitting is mounted on the tube to provide a perfect connection for the temperature sensor. aFe developed this 18 Gauge sturdy Powder-Coated black heat shield to snap onto the top of the lower half of the factory air box to provide a quick and easy installation utilizing factory mounting locations. All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
Installation Instructions- Computer-Designed Roto-Molded Intake Tube
This Part Fits:
Year Make Model Submodel 2019-2024 Ram 1500 Big Horn 2019-2024 Ram 1500 Laramie 2019-2021 Ram 1500 Laramie Longhorn 2019-2024 Ram 1500 Limited 2021-2024 Ram 1500 Limited Longhorn 2019-2024 Ram 1500 Lone Star 2021 Ram 1500 Longhorn 2019-2024 Ram 1500 Rebel 2020-2021 Ram 1500 Special Service 2019-2024 Ram 1500 Tradesman
$30.00
aFe POWER ABS intake covers help reduce air intake temperature and engine noise. These covers provides a stealthy yet aggressive style without hurting the performance of the intake. This cover snaps onto the air intake housing with magnets making for a hassle-free installation.
Installation Instructions- Utilizes Rare-Earth magnets for a long lasting guaranteed fitment
- No Hardware Needed Allows for Quick Snap-In Installation
- Reduces Air Intake Noise without Sacrificing Power
- Black Injection Molded ABS Cover for Stealth Look
- Attaches to Intake Housing with Ease
$338.00
5.5" Flange Massive Air Filter: This intake system utilizes a pre-oiled, 5-3/4" tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has built-in resonance chamber to catch un-wanted air intake noise. One-Piece Heat Shield: Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. Hassle-Free Installation: All clamps, coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
Installation Instructions- CAD Designed Roto-Molded Intake Tube w/Resonance Chamber
- One-Piece Heat Shield Utilizes Stock Mounting Locations
- Washable And Reusable Air Filter For Max. Performance
- No Cutting Or Drilling On OEM Parts
- Faster Hassle Free Installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018 | Ford | F-150 | XL |
| 2018 | Ford | F-150 | XLT |
$387.00
Large Five Layer Performance Air Filter:This aFe POWER Pro 5R is a pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. The filter's massive 9" tall design features a unique inverted top and a 5" flange, making for ample surface area, as well as more flow and longer service intervals when compared to traditional flat top air filters.
- Massive 9" Tall Air Filter with Inverted Top Provides Maximum Surface Area, Flow, and Service Life
- Incorporates Factory RAM Active Air System with No Additional Hardware
- Filter-to-Housing Interface Makes for a Quick and Simple Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +12 HP and +30 Lbs. x Ft. TQ
- Measured Flow: 1020 CFM Rating @ 7" H2O
- Outflows Factory Intake by up to 146%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2018 | Ram | 2500 | Big Horn |
| 2013-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2013-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2013-2016 | Ram | 2500 | Outdoorsman |
| 2013-2018 | Ram | 2500 | SLT |
| 2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2013-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2013-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2013-2018 | Ram | 3500 | SLT |
| 2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$399.00
Large Three Layer Performance Air Filter:This aFe POWER Pro DRY S is an oil-free, 360-degree radial flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The filter's massive 9" tall design features a unique inverted top and a 5" flange, making for ample surface area, as well as more flow and longer service intervals when compared to traditional flat top air filters.
- Massive 9" Tall Air Filter with Inverted Top Provides Maximum Surface Area, Flow, and Service Life
- Incorporates Factory RAM Active Air System with No Additional Hardware
- Filter-to-Housing Interface Makes for a Quick and Simple Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Proven Gains up to +10 HP and +25 Lbs. x Ft. TQ
- Measured Flow: 935 CFM Rating @ 7" H2O
- Outflows Factory Intake by up to 125%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2018 | Ram | 2500 | Big Horn |
| 2013-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2013-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2013-2016 | Ram | 2500 | Outdoorsman |
| 2013-2018 | Ram | 2500 | SLT |
| 2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2013-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2013-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2013-2018 | Ram | 3500 | SLT |
| 2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$387.00
This 9” tall 360-degree radial flow performance air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and use. Its inverted top makes for more filter surface area, resulting in more flow and longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It features an opening, allowing for air to enter from the front of the vehicle when under power. An additional auxiliary air inlet is available for use with an optional Dynamic Air Scoop (P/N 54-73006-S) that installs with zero hardware. This system features a high quality, computer designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The system is computer designed and utilizes factory mounting locations – making for a hassle-free, direct bolt-on installation process that requires no cutting or drilling on OEM parts. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- The Stage-2's aggressive open-element design not only draws attention to the system's massive air filter, but also unleashes your Power Stroke's turbo whistle sound when under power.
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Utilizes OE Air Inlet and Can be Used with Optional Dynamic Air Scoop (DAS)
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Dyno-Proven Gains up to +20 HP and +54 Lbs. x Ft. TQ
- Measured Flow: 805 CFM @ 7" H2O
- Outflows Factory Intake by 77%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Ford | F-250 Super Duty | King Ranch |
| 2017-2019 | Ford | F-250 Super Duty | Lariat |
| 2018-2019 | Ford | F-250 Super Duty | Limited |
| 2017-2019 | Ford | F-250 Super Duty | Platinum |
| 2017-2019 | Ford | F-250 Super Duty | XL |
| 2017-2019 | Ford | F-250 Super Duty | XLT |
| 2017-2019 | Ford | F-350 Super Duty | King Ranch |
| 2017-2019 | Ford | F-350 Super Duty | Lariat |
| 2018-2019 | Ford | F-350 Super Duty | Limited |
| 2017-2019 | Ford | F-350 Super Duty | Platinum |
| 2017-2019 | Ford | F-350 Super Duty | XL |
| 2017-2019 | Ford | F-350 Super Duty | XLT |
$399.00
This 9” tall 360-degree radial flow performance air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in more flow and longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It features an opening, allowing for air to enter from the front of the vehicle when under power. An additional auxiliary air inlet is available for use with an optional Dynamic Air Scoop (P/N 54-73006-S) that installs with zero hardware. This system features a high quality, computer designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The system is computer designed and utilizes factory mounting locations – making for a hassle-free, direct bolt-on installation process that requires no cutting or drilling on OEM parts. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- The Stage-2's aggressive open-element design not only draws attention to the system's massive air filter, but also unleashes your Power Stroke's turbo whistle sound when under power.
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Utilizes OE Air Inlet and Can be Used with Optional Dynamic Air Scoop (DAS)
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Proven Gains up to +13 HP and +35 Lbs. x Ft. TQ
- Measured Flow: 750 CFM @ 7" H2O
- Outflows Factory Intake by 65%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Ford | F-250 Super Duty | King Ranch |
| 2017-2019 | Ford | F-250 Super Duty | Lariat |
| 2018-2019 | Ford | F-250 Super Duty | Limited |
| 2017-2019 | Ford | F-250 Super Duty | Platinum |
| 2017-2019 | Ford | F-250 Super Duty | XL |
| 2017-2019 | Ford | F-250 Super Duty | XLT |
| 2017-2019 | Ford | F-350 Super Duty | King Ranch |
| 2017-2019 | Ford | F-350 Super Duty | Lariat |
| 2018-2019 | Ford | F-350 Super Duty | Limited |
| 2017-2019 | Ford | F-350 Super Duty | Platinum |
| 2017-2019 | Ford | F-350 Super Duty | XL |
| 2017-2019 | Ford | F-350 Super Duty | XLT |
$399.00
This 9” tall 360-degree radial flow air filter features a 6" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. The open design allows for easy viewing of the air filter and delivers an aggressive intake induction sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Installation Instructions- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
- Dyno-Proven Gains up to +17 HP & +37 Lbs. x Ft. TQ
- Measured Flow: 600 CFM @ 7" H2O
- Outflows Factory Intake by 36%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2016 | Chevrolet | Silverado 2500 HD | High Country |
| 2011-2016 | Chevrolet | Silverado 2500 HD | LT |
| 2011-2016 | Chevrolet | Silverado 2500 HD | LTZ |
| 2011-2016 | Chevrolet | Silverado 2500 HD | WT |
| 2015-2016 | Chevrolet | Silverado 3500 HD | High Country |
| 2011-2016 | Chevrolet | Silverado 3500 HD | LT |
| 2011-2016 | Chevrolet | Silverado 3500 HD | LTZ |
| 2011-2016 | Chevrolet | Silverado 3500 HD | WT |
| 2015-2016 | GMC | Sierra 2500 HD | Base |
| 2011-2016 | GMC | Sierra 2500 HD | Denali |
| 2011-2016 | GMC | Sierra 2500 HD | SLE |
| 2011-2016 | GMC | Sierra 2500 HD | SLT |
| 2011-2014 | GMC | Sierra 2500 HD | WT |
| 2015-2016 | GMC | Sierra 3500 HD | Base |
| 2011-2016 | GMC | Sierra 3500 HD | Denali |
| 2011-2016 | GMC | Sierra 3500 HD | SLE |
| 2011-2016 | GMC | Sierra 3500 HD | SLT |
| 2011-2014 | GMC | Sierra 3500 HD | WT |
$71.00
This Magnum FORCE Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Ford Mustang. It is designed to capture the coolest, freshest air from the front grille to ensure increased air velocity into your air intake system. This Dynamic Air Scoop guides cool ambient air from outside the vehicle directly into your intake system. The cool dense air allows your vehicle to run more efficiently, increasing performance. This D.A.S. is constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable.
Installation Instructions- This Dynamic Air Scoop (D.A.S.) increases the amount of cool, dense airflow delivered to your air intake system for maximum performance and quicker throttle response.
- Quickly Snaps Into factory inlet location and uses locking tabs for a Hassle/Hardware-Free Installation
- Designed to fit factory intakes in combination with aFe POWER Intake Systems
- Durable, Impact-Resistant LLDPE Polymer Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2021 | Ford | Mustang | EcoBoost |
| 2015-2021 | Ford | Mustang | EcoBoost Premium |
| 2015-2021 | Ford | Mustang | GT |
| 2015-2017 | Ford | Mustang | V6 |
$60.00
This Magnum FORCE Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Ford Mustang. It is designed to capture the coolest, freshest air from the front grille to ensure increased air velocity into your air intake system. This Dynamic Air Scoop guides cool ambient air from outside the vehicle directly into your intake system. The cool dense air allows your vehicle to run more efficiently, increasing performance. This D.A.S. is constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable. The 54-13015S Dynamic Air Scoop fits the factory systems, as well as with aFe POWER Intake Systems. This part easily snaps into factory inlet location and requires no modification to your vehicle.
Installation Instructions- This Dynamic Air Scoop (D.A.S.) increases the amount of cool, dense airflow delivered to your air intake system for maximum performance and quicker throttle response.
- Quickly Snaps Into factory inlet location and uses locking tabs for a Hassle/Hardware-Free Installation
- Designed to fit factory intakes in combination with aFe POWER Intake Systems
- Durable, Impact-Resistant LLDPE Polymer Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2021 | Ford | Mustang | EcoBoost |
| 2015-2021 | Ford | Mustang | EcoBoost Premium |
| 2015-2021 | Ford | Mustang | GT |
| 2015-2017 | Ford | Mustang | V6 |
$365.00
6" Flange Massive Air Filter: This intake system utilizes a pre-oiled, 7" tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Dyno-Tuned Carbon Fiber Intake Tube: Lightweight, high gloss, clear-coated twill weave carbon fiber tube to achieve maximum power gains while maintaining a perfect fit. One-Piece Heat Shield: Lightweight aluminum Powder-coated black One-piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. Hassle-Free Installation: All clamps, reinforced coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
Installation Instructions- Repl. Factory Intake For Improved HP/Torque/Styling
- Rotomolded Plastic Tube For Maximum Air Flow
- Uses Pro 5R Filter For Maximum Air Flow
- Improved Throttle Response
- 2 Year Limited Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2017 | Ford | Mustang | GT Premium |
Showing 660/1974
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.