Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1974 products
1974 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$354.00
7" Tall "Oil Free" Air Filter:This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.High Quality Tube:This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.Hassle-Free Installation:All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.
Installation Instructions- No Cutting Or Drilling On Factory Parts For Faster Installation
- Pro DRY S Oil-Free 3 Layer Synthetic Media
- CAD-Designed Roto-Molded Intake Tube
- Vacuum Form Cover For Stealthy Look
- Incl. Auxiliary Air Inlet
- Outflows Factory Intake
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | BMW | 340i | Base |
| 2017-2019 | BMW | 340i GT xDrive | Base |
| 2016-2018 | BMW | 340i xDrive | Base |
| 2017-2020 | BMW | 440i | Base |
| 2017-2020 | BMW | 440i Gran Coupe | Base |
| 2017-2020 | BMW | 440i xDrive | Base |
| 2017-2020 | BMW | 440i xDrive Gran Coupe | Base |
| 2016-2018 | BMW | 740i | Base |
| 2017-2018 | BMW | 740i xDrive | Base |
| 2017-2021 | BMW | M240i | Base |
| 2017-2021 | BMW | M240i xDrive | Base |
$479.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- 3 Layer Of Progressive Non-Synthetic Oil Media Air Filter
- Uses Pro DRY S Air Filter For Maximum Convenience
- Heat-Insulating Rotomolded-Molded Plastic Tube
- No Cutting Or Drilling On OEM Parts
- Powdercoat 18 Gauge Filter Housing
- Washable And Reusable Air Filter
- 100% Polyurethane For Long Life
- 4 in. 360 deg. Air Filter
- Hassle Free Installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Dodge | Challenger | SRT Hellcat |
| 2015-2017 | Dodge | Charger | SRT Hellcat |
$462.00
Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Dont waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet.
Installation Instructions- Hassle Free Installation
- 1-Piece Heat Shield
- Mandrel Bent Tubing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013 | Chevrolet | Corvette | 427 |
| 2008 | Chevrolet | Corvette | 427 Limited Edition Z06 |
| 2006-2013 | Chevrolet | Corvette | Z06 |
| 2011 | Chevrolet | Corvette | Z06 Carbon |
$354.00
aFe Power now offers an intake cover to help reduce air intake noise. This cover is constructed of vacuum formed ABS plastic material that bolts right up to the intake housing. The aFe logo is front and center letting everyone know what brand of intake you have. This cover provides a stealthy yet aggressive style without hurting the performance of the intake.
- 4 in. Mandrel Bent 409 Stainless Steel Tubing
- Bayonet Style Hangers For Easy Installation
- Polished Stainless Tip Included
- 2 Year Limited Warranty
- High Flow Muffler
- Maximum Flow
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2015 | Mini | Cooper | Coupe S |
| 2012-2015 | Mini | Cooper | Roadster S |
| 2009-2015 | Mini | Cooper | S |
| 2010-2014 | Mini | Cooper | S Clubman |
| 2011-2016 | Mini | Cooper Countryman | S |
| 2013-2016 | Mini | Cooper Paceman | S |
| 2013-2015 | Mini | Cooper Paceman | S ALL4 |
$338.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- 3 Layers Progressively Finer Mesh Synthetic Media
- Outflows Factory Intake By 56%
- Factory Mounting Locations
- Hassle Free Installation
- 2 Year Limited Warranty
- Washable And Reusable
- Tuned Intake Tube
- Silicone Coupler
- Non-Oiled
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2007 | Volkswagen | Jetta | 2.5 |
| 2008 | Volkswagen | Jetta | S |
| 2008 | Volkswagen | Jetta | SE |
| 2008 | Volkswagen | Jetta | SEL |
| 2006 | Volkswagen | Jetta | Value Edition |
| 2007 | Volkswagen | Jetta | Wolfsburg Edition |
| 2006-2007 | Volkswagen | Rabbit | 2.5 |
| 2008 | Volkswagen | Rabbit | S |
$338.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- 3 Layers Progressively Finer Mesh Synthetic Media
- Outflows Factory Intake By 33%
- Factory Mounting Locations
- Hassle Free Installation
- 2 Year Limited Warranty
- Washable And Reusable
- Tuned Intake Tube
- Silicone Coupler
- Non-Oiled
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010 | Volkswagen | Golf | Base |
| 2009-2010 | Volkswagen | Jetta | S |
| 2009-2010 | Volkswagen | Jetta | SE |
| 2009-2010 | Volkswagen | Jetta | SEL |
| 2009 | Volkswagen | Rabbit | S |
$451.00
8" Tall Air Filter:This intake system utilizes an oil free, 8" tall inverted top conical 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum airflow and performance.Mandrel-Bent Tubing:One-Piece 3-1/2" Mandrel-Bent Powder-Coated matte gray aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque.One-Piece Heat Shield:Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.3-Angle Adaptor:The 3-angle adaptor is used to speed up the airflow after the air filter for improved performance and throttle response.Hassle-Free Installation:All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
Installation Instructions- Pro DRY S oil-free 3-Layer Progressively Finer Porosity Synthetic Media for Maximum Convenience With Excellent Filtration Efficiency
- Mandrel-bent Powder-coated matte gray aluminum intake tube improves volumetric efficiency for better performance.
- 3-angle filter adaptor increases air velocity after the air filter for improved performance and throttle response
- Powder-Coated One Piece Heat-shield utilizes stock mounting locations
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Cadillac | Escalade | Base |
| 2015-2020 | Cadillac | Escalade | Luxury |
| 2015-2020 | Cadillac | Escalade | Platinum |
| 2015-2016 | Cadillac | Escalade | Premium |
| 2017-2020 | Cadillac | Escalade | Premium Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Base |
| 2015-2020 | Cadillac | Escalade ESV | Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Platinum |
| 2015-2016 | Cadillac | Escalade ESV | Premium |
| 2017-2020 | Cadillac | Escalade ESV | Premium Luxury |
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2014-2018 | Chevrolet | Silverado 1500 | LT |
| 2014-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2015-2018 | Chevrolet | Silverado 1500 | SSV |
| 2014-2018 | Chevrolet | Silverado 1500 | WT |
| 2019 | Chevrolet | Silverado 1500 LD | Custom |
| 2019 | Chevrolet | Silverado 1500 LD | LT |
| 2019 | Chevrolet | Silverado 1500 LD | WT |
| 2015-2020 | Chevrolet | Suburban | LS |
| 2015-2020 | Chevrolet | Suburban | LT |
| 2015-2016 | Chevrolet | Suburban | LTZ |
| 2017-2020 | Chevrolet | Suburban | Premier |
| 2015-2020 | Chevrolet | Tahoe | LS |
| 2015-2020 | Chevrolet | Tahoe | LT |
| 2015-2016 | Chevrolet | Tahoe | LTZ |
| 2015-2020 | Chevrolet | Tahoe | PPV |
| 2017-2020 | Chevrolet | Tahoe | Premier |
| 2015-2020 | Chevrolet | Tahoe | SSV |
| 2014-2018 | GMC | Sierra 1500 | Base |
| 2014-2018 | GMC | Sierra 1500 | Denali |
| 2014-2018 | GMC | Sierra 1500 | SLE |
| 2014-2018 | GMC | Sierra 1500 | SLT |
| 2019 | GMC | Sierra 1500 Limited | Base |
| 2019 | GMC | Sierra 1500 Limited | SLE |
| 2015-2020 | GMC | Yukon | Denali |
| 2015-2020 | GMC | Yukon | SLE |
| 2015-2020 | GMC | Yukon | SLT |
| 2015-2020 | GMC | Yukon XL | Denali |
| 2015-2020 | GMC | Yukon XL | SLE |
| 2015-2020 | GMC | Yukon XL | SLT |
$420.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- 3 Layer Of Progressive Non-Synthetic Oil Media Air Filter
- Uses Pro DRY S Air Filter For Maximum Convenience
- Heat-Insulating Rotomolded-Molded Plastic Tube
- No Cutting Or Drilling On OEM Parts
- Powdercoat 18 Gauge Filter Housing
- Washable And Reusable Air Filter
- 100% Polyurethane For Long Life
- Stainless Steel T-Bolt Clamps
- 4 in. 360 deg. Air Filter
- Hassle Free Installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Cadillac | Escalade | Base |
| 2015-2020 | Cadillac | Escalade | Luxury |
| 2015-2020 | Cadillac | Escalade | Platinum |
| 2015-2016 | Cadillac | Escalade | Premium |
| 2017-2020 | Cadillac | Escalade | Premium Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Base |
| 2015-2020 | Cadillac | Escalade ESV | Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Platinum |
| 2015-2016 | Cadillac | Escalade ESV | Premium |
| 2017-2020 | Cadillac | Escalade ESV | Premium Luxury |
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2014-2018 | Chevrolet | Silverado 1500 | LT |
| 2014-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2015-2018 | Chevrolet | Silverado 1500 | SSV |
| 2014-2018 | Chevrolet | Silverado 1500 | WT |
| 2019 | Chevrolet | Silverado 1500 LD | Custom |
| 2019 | Chevrolet | Silverado 1500 LD | LT |
| 2019 | Chevrolet | Silverado 1500 LD | WT |
| 2015-2020 | Chevrolet | Suburban | LS |
| 2015-2020 | Chevrolet | Suburban | LT |
| 2015-2016 | Chevrolet | Suburban | LTZ |
| 2017-2020 | Chevrolet | Suburban | Premier |
| 2015-2020 | Chevrolet | Tahoe | LS |
| 2015-2020 | Chevrolet | Tahoe | LT |
| 2015-2016 | Chevrolet | Tahoe | LTZ |
| 2015-2020 | Chevrolet | Tahoe | PPV |
| 2017-2020 | Chevrolet | Tahoe | Premier |
| 2015-2020 | Chevrolet | Tahoe | SSV |
| 2014-2018 | GMC | Sierra 1500 | Base |
| 2014-2018 | GMC | Sierra 1500 | Denali |
| 2014-2018 | GMC | Sierra 1500 | SLE |
| 2014-2018 | GMC | Sierra 1500 | SLT |
| 2019 | GMC | Sierra 1500 Limited | Base |
| 2019 | GMC | Sierra 1500 Limited | SLE |
| 2015-2020 | GMC | Yukon | Denali |
| 2015-2020 | GMC | Yukon | SLE |
| 2015-2020 | GMC | Yukon | SLT |
| 2015-2020 | GMC | Yukon XL | Denali |
| 2015-2020 | GMC | Yukon XL | SLE |
| 2015-2020 | GMC | Yukon XL | SLT |
$820.00
6" Flange Massive Air Filter:This intake system utilizes an oil free, 7" tall inverted top conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.Dyno-Tuned Carbon Fiber Intake Tube:100% Lightweight, high gloss, clear-coated twill weave carbon fiber tube to achieve maximum power gains while maintaining a perfect fit.Aluminum Heat Shield:Lightweight aluminum Powder-coated black One-piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.Hassle-Free Installation:All clamps, reinforced coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
Installation Instructions- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- 100% Twill Weave Carbon Fiber Intake Tube
- Improved Throttle Response
- 2 Year Limited Warranty
- 17% cfm Flow Gain
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023 | Chrysler | 300 | C |
| 2012-2014 | Chrysler | 300 | SRT8 |
| 2013 | Chrysler | 300 | SRT8 Core |
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2019 | Dodge | Challenger | R/T 392 |
| 2016-2023 | Dodge | Challenger | R/T Scat Pack |
| 2021 | Dodge | Challenger | R/T Scat Pack Shaker Widebody |
| 2019-2023 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2015 | Dodge | Challenger | Scat Pack |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2011-2014 | Dodge | Challenger | SRT8 |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2021 | Dodge | Challenger | T/A 392 Widebody |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2017-2018 | Dodge | Charger | R/T 392 |
| 2015-2018 | Dodge | Charger | R/T Scat Pack |
| 2019-2023 | Dodge | Charger | Scat Pack |
| 2020 | Dodge | Charger | Scat Pack 392 Widebody |
| 2022-2023 | Dodge | Charger | Scat Pack Widebody |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2012-2014 | Dodge | Charger | SRT8 |
$451.00
Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- Rotomolded Plastic Tube For Maximum Air Flow
- Improved Throttle Response
- 2 Year Limited Warranty
- 32% cfm Flow Gain
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023 | Chrysler | 300 | C |
| 2012-2014 | Chrysler | 300 | SRT8 |
| 2013 | Chrysler | 300 | SRT8 Core |
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2019 | Dodge | Challenger | R/T 392 |
| 2016-2023 | Dodge | Challenger | R/T Scat Pack |
| 2021 | Dodge | Challenger | R/T Scat Pack Shaker Widebody |
| 2019-2023 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2015 | Dodge | Challenger | Scat Pack |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2011-2014 | Dodge | Challenger | SRT8 |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2021 | Dodge | Challenger | T/A 392 Widebody |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2017-2018 | Dodge | Charger | R/T 392 |
| 2015-2018 | Dodge | Charger | R/T Scat Pack |
| 2019-2023 | Dodge | Charger | Scat Pack |
| 2020 | Dodge | Charger | Scat Pack 392 Widebody |
| 2022-2023 | Dodge | Charger | Scat Pack Widebody |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2012-2014 | Dodge | Charger | SRT8 |
$451.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- 3 Layer Oil Free Cotton/Synthetic Gauze Media
- 17 Horsepower Gain/17 ft./lbs. Torque Gain
- Durable 16 Gauge Black Powdercoat Housing
- Washable And Reusable Air Filter
- Rotomolded Heat-Insulating Tube
- Outflows Factory Intake By 40%
- Silicone Throttle Body Adapter
- Stainless Steel T-Bolt Clamp
- 2 Year Limited Warranty
- All Hardware Included
- 40% cfm Flow Gain
- Direct Bolt-On
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2020 | Chrysler | 300 | C |
| 2012-2014 | Chrysler | 300 | C Luxury |
| 2015-2017 | Chrysler | 300 | C Platinum |
| 2018 | Chrysler | 300 | Limited |
| 2012-2023 | Chrysler | 300 | S |
| 2011-2023 | Dodge | Challenger | R/T |
| 2012 | Dodge | Challenger | R/T Classic |
| 2015-2016 | Dodge | Challenger | R/T Plus |
| 2016 | Dodge | Challenger | R/T Plus Shaker |
| 2016 | Dodge | Challenger | R/T Shaker |
| 2017-2018 | Dodge | Challenger | T/A |
| 2017-2018 | Dodge | Charger | Daytona |
| 2011-2023 | Dodge | Charger | Pursuit |
| 2011-2023 | Dodge | Charger | R/T |
| 2015-2016 | Dodge | Charger | R/T Road & Track |
| 2011-2013 | Dodge | Charger | SE |
$435.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- 37% cfm Flow Gain/13 HP Gain/17 ft./lbs. Torque Gain
- Patent Pending Filter Flange Retention Design
- Durable 18 Gauge Black Powder Coated Housing
- Uses Pro DRY S Filter For Maximum Air Flow
- 3 Layer Oil-Free Synthetic Gauze Media
- Washable And Reusable Air Filter
- 360 deg. Radial Flow Air Filter
- Wrinkle-Black Powder-Coating
- 1 Piece Mandrel-Bent Tube
- 2 Year Limited Warranty
- All Hardware Included
- Direct Bolt On
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Chrysler | 300 | Base |
| 2013-2017 | Chrysler | 300 | C |
| 2013-2014 | Chrysler | 300 | C Luxury |
| 2015-2017 | Chrysler | 300 | C Platinum |
| 2011-2012,2015-2020 | Chrysler | 300 | Limited |
| 2012-2023 | Chrysler | 300 | S |
| 2018-2023 | Chrysler | 300 | Touring |
| 2018-2023 | Chrysler | 300 | Touring L |
| 2017-2023 | Dodge | Challenger | GT |
| 2014 | Dodge | Challenger | Rallye Redline |
| 2011 | Dodge | Challenger | SE |
| 2012-2023 | Dodge | Challenger | SXT |
| 2012,2015-2018 | Dodge | Challenger | SXT Plus |
| 2018-2023 | Dodge | Charger | GT |
| 2018 | Dodge | Charger | GT Plus |
| 2011-2023 | Dodge | Charger | Pursuit |
| 2011-2017 | Dodge | Charger | SE |
| 2012-2023 | Dodge | Charger | SXT |
| 2012,2018 | Dodge | Charger | SXT Plus |
| 2018 | Dodge | Charger | SXT Plus Leather |
$435.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- Rotomolded Plastic Tube For Maximum Air Flow
- Improved Throttle Response
- 2 Year Limited Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2013 | Audi | A3 | Base |
| 2010-2013 | Audi | A3 | TDI |
| 2013 | Volkswagen | Beetle | R-Line |
| 2012-2013 | Volkswagen | Beetle | Turbo |
| 2012-2014 | Volkswagen | Eos | Executive |
| 2009-2014 | Volkswagen | Eos | Komfort |
| 2009-2013 | Volkswagen | Eos | Lux |
| 2013-2014 | Volkswagen | Eos | Sport |
| 2009-2013 | Volkswagen | GTI | Base |
| 2014 | Volkswagen | GTI | Driver's Edition |
| 2014 | Volkswagen | GTI | Wolfsburg Edition |
| 2011 | Volkswagen | Jetta | Base |
| 2009,2012-2014 | Volkswagen | Jetta | GLI |
| 2011-2013 | Volkswagen | Jetta | S |
| 2009 | Volkswagen | Jetta | SEL |
| 2009-2013 | Volkswagen | Jetta | TDI |
| 2010 | Volkswagen | Jetta | TDI Cup Edition |
| 2012-2013 | Volkswagen | Jetta | TDI Premium |
| 2009-2010 | Volkswagen | Jetta | Wolfsburg Edition |
| 2009-2010 | Volkswagen | Passat | Komfort |
$399.00
This 8” tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound.This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps and hardware are included. The filter is mounted on a 3-angle adapter for maximum airflow and convenience. This innovative design allows for easy filter servicing, by loosening only one clamp.
Installation Instructions- The Stage-2's oversized filter and open design not only draws attention, but also unleashes an aggressive turbo whistle sound when your under power.
- Utilizes Factory Mounting Locations for a Fast and Easy Installation (Roughly 30 Minutes)
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- 3-Angle Filter Adapter Allows for Maximum Flow and Easy Installation/Maintenance
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2016 | Ford | F-250 Super Duty | King Ranch |
| 2011-2016 | Ford | F-250 Super Duty | Lariat |
| 2013-2016 | Ford | F-250 Super Duty | Platinum |
| 2011-2016 | Ford | F-250 Super Duty | XL |
| 2011-2016 | Ford | F-250 Super Duty | XLT |
| 2011-2016 | Ford | F-350 Super Duty | King Ranch |
| 2011-2016 | Ford | F-350 Super Duty | Lariat |
| 2013-2016 | Ford | F-350 Super Duty | Platinum |
| 2011-2016 | Ford | F-350 Super Duty | XL |
| 2011-2016 | Ford | F-350 Super Duty | XLT |
$399.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- Rotomolded Plastic Tube For Maximum Air Flow
- Improved Throttle Response
- 2 Year Limited Warranty
- 40% cfm Flow Gain
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005 | Volkswagen | Golf | GL |
| 2005 | Volkswagen | Golf | GLS |
| 2006-2009 | Volkswagen | GTI | Base |
| 2007 | Volkswagen | GTI | Fahrenheit |
| 2006-2007 | Volkswagen | Jetta | 2.0T |
| 2005 | Volkswagen | Jetta | GL |
| 2006-2009 | Volkswagen | Jetta | GLI |
| 2005 | Volkswagen | Jetta | GLS |
| 2009 | Volkswagen | Jetta | SEL |
| 2008-2009 | Volkswagen | Jetta | Wolfsburg Edition |
$387.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- Rotomolded Plastic Tube For Maximum Air Flow
- Increased Horsepower And Torque
- Improved Throttle Response
- 2 Year Limited Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2007 | Chevrolet | Corvette | Base |
$323.00
Maximum performance within minutes is what this aFe Stage 1 cold air intake system delivers. Enclosed in a durable 16 gauge heat shield; a massive washable/reusable; 360 deg. conical Pro 5R air filter increases airflow resulting in an additional 6 hp; and 7 lbs./ft/ torque. This intake system also features a unique 3-angle adaptor for increased air velocity. The Pro 5R air filter is constructed with 100 percent polyurethane for long life and multiple cleaning cycles. This intake is the easiest intake on the market to install. Simply remove the factory intake and mount the 3-angle adaptor with the air filter to the MAF sensor tube and you are breathing more air and producing more power.
- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- Rotomolded Plastic Tube For Maximum Air Flow
- Improved Throttle Response
- 2 Year Limited Warranty
- 29% cfm Flow Gain
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1999-2004 | Volkswagen | Beetle | GL |
| 1999-2005 | Volkswagen | Beetle | GLS |
| 2005 | Volkswagen | Beetle | GLS TDI |
| 1999-2004 | Volkswagen | Beetle | GLX |
| 2001-2002 | Volkswagen | Beetle | Sport |
| 2006 | Volkswagen | Beetle | TDI |
| 2002-2004 | Volkswagen | Beetle | Turbo S |
| 2000-2003 | Volkswagen | Golf | GL |
| 2004 | Volkswagen | Golf | GL TDI |
| 2000-2003 | Volkswagen | Golf | GLS |
| 2004,2006 | Volkswagen | Golf | GLS TDI |
| 2002-2006 | Volkswagen | Golf | GTI 1.8T |
| 2003 | Volkswagen | Golf | GTI 20th Anniversary |
| 2002 | Volkswagen | Golf | GTI 337 |
| 2000-2001 | Volkswagen | Golf | GTI GLS |
| 2005 | Volkswagen | Golf | TDI |
| 2003-2005 | Volkswagen | Jetta | GL |
| 2004-2005 | Volkswagen | Jetta | GLI |
| 2000-2005 | Volkswagen | Jetta | GLS |
| 2000-2004 | Volkswagen | Jetta | TDI |
| 2001,2003 | Volkswagen | Jetta | Wolfsburg Edition |
$399.00
Maximum performance within minutes is what this aFe Stage 1 cold air intake system delivers. Enclosed in a durable 16 gauge heat shield; a massive washable/reusable; 360 deg. conical Pro 5R air filter increases airflow resulting in an additional 6 hp; and 7 lbs./ft/ torque. This intake system also features a unique 3-angle adaptor for increased air velocity. The Pro 5R air filter is constructed with 100 perc ent polyurethane for long life and multiple cleaning cycles. This intake is the easiest intake on the market to install. Simply remove the factory intake and mount the 3-angle adaptor with the air filter to the MAF sensor tube and you are breathing more air and producing more power.
- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- 360 deg. Radial Flow Air Filter
- Improved Throttle Response
- 2 Year Limited Warranty
- 65% cfm Flow Gain
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2001-2003 | BMW | 525i | Base |
| 1997-2000 | BMW | 528i | Base |
$354.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- Rotomolded Plastic Tube For Maximum Air Flow
- Improved Throttle Response
- 2 Year Limited Warranty
- 48% cfm Flow Gain
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2008 | Mini | Cooper | S |
$399.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- Rotomolded Plastic Tube For Maximum Air Flow
- Improved Throttle Response
- 2 Year Limited Warranty
- 64% cfm Flow gain
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2010 | Jeep | Commander | Limited |
| 2007-2009 | Jeep | Commander | Overland |
| 2010 | Jeep | Commander | Sport |
| 2010 | Jeep | Grand Cherokee | Laredo |
| 2005-2010 | Jeep | Grand Cherokee | Limited |
| 2006-2009 | Jeep | Grand Cherokee | Overland |
$387.00
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Installation Instructions- Repl. Factory Intake For Improved HP/Torque/Styling
- Uses Pro DRY S Air Filter For Maximum Convenience
- Rotomolded Plastic Tube For Maximum Air Flow
- Improved Throttle Response
- 2 Year Limited Warranty
- 1% cfm Flow Gain
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003 | Chevrolet | Corvette | 50th Anniversary Edition |
| 2003 | Chevrolet | Corvette | 50th Anniversary Edition Pace Car |
| 1997-2004 | Chevrolet | Corvette | Base |
| 1998 | Chevrolet | Corvette | Indianapolis 500 Pace Car |
| 2001-2004 | Chevrolet | Corvette | Z06 |
$420.00
This Momentum GT intake system produces 9hp, 15lbs x ft of torque, and outflows the factory intake by 20%. The one-piece sealed housing includes auxiliary air inlet to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish t o block off the auxiliary air inlet. This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. A custom high temperature reinforced silicone elbow coupling with aluminum fitting is included for easy install to the factory breather line.
Installation Instructions- Patented Housing To Filter Interface
- Uses Factory Mounting Locations
- Increased HP/Throttle Response
- Includes Air Filter
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Nissan | TITAN XD | Platinum Reserve |
| 2016-2019 | Nissan | TITAN XD | PRO-4X |
| 2016-2019 | Nissan | TITAN XD | S |
| 2016-2019 | Nissan | TITAN XD | SL |
| 2016-2019 | Nissan | TITAN XD | SV |
$420.00
Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to block off the auxiliary air inlet. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded designed intake tube to fit with the stock mechanical fan and achieve maximum power gains while maintaining a perfect fit. Huge Pro 10R Performance Air Filter: The Momentum HD intake is designed around a massive 1,000cfm performance 360 degree radial flow air filter with 10-layers of progressive cotton media providing 99.59% cumulative efficiency (independently tested). The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Premium Hardware: High quality premium clamps ensures the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Installation Instructions- No Cutting Or Drilling On Factory Parts For Easy Installation
- Unique Filter-To-Housing Interface For Easy Installation
- CAD Designed Rotomolded Sealed Housing w/Air Inlet
- Outflows Factory Intake By Up To 70%
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Chevrolet | Silverado 2500 HD | High Country |
| 2017-2019 | Chevrolet | Silverado 2500 HD | LT |
| 2017-2019 | Chevrolet | Silverado 2500 HD | LTZ |
| 2017-2019 | Chevrolet | Silverado 2500 HD | WT |
| 2017-2019 | Chevrolet | Silverado 3500 HD | High Country |
| 2017-2019 | Chevrolet | Silverado 3500 HD | LT |
| 2017-2019 | Chevrolet | Silverado 3500 HD | LTZ |
| 2017-2019 | Chevrolet | Silverado 3500 HD | WT |
| 2017-2019 | GMC | Sierra 2500 HD | Base |
| 2017-2019 | GMC | Sierra 2500 HD | Denali |
| 2017-2019 | GMC | Sierra 2500 HD | SLE |
| 2017-2019 | GMC | Sierra 2500 HD | SLT |
| 2017-2019 | GMC | Sierra 3500 HD | Base |
| 2017-2019 | GMC | Sierra 3500 HD | Denali |
| 2017-2019 | GMC | Sierra 3500 HD | SLE |
| 2017-2019 | GMC | Sierra 3500 HD | SLT |
$420.00
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
Installation Instructions- 1000 cfm Performance 360 deg. Radial Flow Air Filter
- Wrapped In Reinforce Metal For Maximum Strength
- 10 Layer Progressive Cotton Gauze Oiled Media
- Unique Air Filter To Housing Interface
- Allows For Maximum Filter Size
- Increases Available Air Volume
- Easy Installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2010 | Chevrolet | Silverado 2500 HD | LT |
| 2007-2010 | Chevrolet | Silverado 2500 HD | LTZ |
| 2007-2010 | Chevrolet | Silverado 2500 HD | WT |
| 2007-2010 | Chevrolet | Silverado 3500 HD | LT |
| 2007-2010 | Chevrolet | Silverado 3500 HD | LTZ |
| 2007-2010 | Chevrolet | Silverado 3500 HD | WT |
| 2007-2010 | GMC | Sierra 2500 HD | SLE |
| 2007-2010 | GMC | Sierra 2500 HD | SLT |
| 2007-2010 | GMC | Sierra 2500 HD | WT |
| 2007-2010 | GMC | Sierra 3500 HD | SLE |
| 2007-2010 | GMC | Sierra 3500 HD | SLT |
| 2007-2010 | GMC | Sierra 3500 HD | WT |
$420.00
Unique One-Piece High Quality Housing w/ Auxiliary Scoop: The smooth one-piece high quality sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish to block off the auxiliary air inlet. (US PAT 9440175) For Filter-to-Housing Interface. High Quality Tube: This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Huge 10-Layer Performance Air Filter: The Momentum HD inta ke is designed around a massive 1,000cfm performance 360 degree radial flow air filter with 10-layers of progressive cotton media providing 99.59% cumulative efficiency (independently tested). The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Premium Hardware: Premium clamps and a silicone elbow coupling are used for strength and flexibility while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Also available and sold separately is a Dynamic Air Scoop (P/N 54-73006-S) to direct more cold air for the front of the truck into the intake housing.
Installation Instructions- No Cutting Or Drilling On Factory Parts For Easy Installation
- High Quality 1-Piece Sealed Housing w/Auxiliary Air Inlet
- Unique Air Filter To Housing Interface
- CAD-Designed Roto-Molded Intake Tube
- Premium Hardware
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Ford | F-250 Super Duty | King Ranch |
| 2017-2019 | Ford | F-250 Super Duty | Lariat |
| 2018-2019 | Ford | F-250 Super Duty | Limited |
| 2017-2019 | Ford | F-250 Super Duty | Platinum |
| 2017-2019 | Ford | F-250 Super Duty | XL |
| 2017-2019 | Ford | F-250 Super Duty | XLT |
| 2017-2019 | Ford | F-350 Super Duty | King Ranch |
| 2017-2019 | Ford | F-350 Super Duty | Lariat |
| 2018-2019 | Ford | F-350 Super Duty | Limited |
| 2017-2019 | Ford | F-350 Super Duty | Platinum |
| 2017-2019 | Ford | F-350 Super Duty | XL |
| 2017-2019 | Ford | F-350 Super Duty | XLT |
$420.00
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
Installation Instructions- 1000 cfm Performance 360 deg. Radial Flow Air Filter
- Wrapped In Reinforce Metal For Maximum Strength
- 10 Layer Progressive Cotton Gauze Oiled Media
- Unique Air Filter To Housing Interface
- Allows For Maximum Filter Size
- Increases Available Air Volume
- Easy Installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2016 | Ford | F-250 Super Duty | King Ranch |
| 2011-2016 | Ford | F-250 Super Duty | Lariat |
| 2013-2016 | Ford | F-250 Super Duty | Platinum |
| 2011-2016 | Ford | F-250 Super Duty | XL |
| 2011-2016 | Ford | F-250 Super Duty | XLT |
| 2011-2016 | Ford | F-350 Super Duty | King Ranch |
| 2011-2016 | Ford | F-350 Super Duty | Lariat |
| 2013-2016 | Ford | F-350 Super Duty | Platinum |
| 2011-2016 | Ford | F-350 Super Duty | XL |
| 2011-2016 | Ford | F-350 Super Duty | XLT |
$420.00
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in sight window to the massive 1,000 cfm air filter and premium hardware, we spared no expense to give you the best intake on the market. Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for extreme conditions when you want to block the auxiliary air scoop. A large, clear sight window is used for a hassle-free filter inspection. Roto-mold Tube: This System uses a CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. Huge 10-Layer Pro 10R Performance Air Filter: This Momentum HD is designed around a massive 1,000 cfm 360 degree radial flow performance air filter with 10-layers of progressive cotton gauze oiled media providing 99.59% cumulative efficiency (independently tested). The unique air filter to housing interface (PATENT PENDING) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Premium Hardware: Premium stainless steel T-bolt clamps are used for strength and durability while also providing the most secure installation available. Momentum HD intakes are designed with fewer parts for a quick and simple installation. Proven Results: After a rigorous design and testing phase, the results are in. The Momentum HD intake system outflows the factory intake by 38% and resulted in 16 additional horsepower and 26 lbs. x ft. torque.
Installation Instructions- Clear Sight Window Provides Easy Filter Inspection Without Disassembly
- Outflows Factory Intake by 38%
- One-Piece Roto-Molded Housing
- +26 lbs. x ft. TQ & +16 HP
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2004-2007 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2004-2007 | Ford | F-250 Super Duty | King Ranch |
| 2003-2007 | Ford | F-250 Super Duty | Lariat |
| 2003-2007 | Ford | F-250 Super Duty | XL |
| 2003-2007 | Ford | F-250 Super Duty | XLT |
| 2004-2007 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2003-2007 | Ford | F-350 Super Duty | King Ranch |
| 2003-2007 | Ford | F-350 Super Duty | Lariat |
| 2003-2007 | Ford | F-350 Super Duty | XL |
| 2003-2007 | Ford | F-350 Super Duty | XLT |
$420.00
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
Installation Instructions- 10 Layer Progressively Finer Cotton Gauze Oiled Media
- Unique House-To-Filter Interface; Patent Pending
- w/Auxiliary Scoop And Built In Battery Tray
- CAD-Designed Rotomolded-Molded Intake Tube
- Easy Inspection Of Filter w/o Disassembly
- For Maximum Performance
- 1-Piece Sealed Housing
- Easy Installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003 | Ford | Excursion | Eddie Bauer |
| 2000-2003 | Ford | Excursion | Limited |
| 2000-2003 | Ford | Excursion | XLT |
| 1999-2003 | Ford | F-250 Super Duty | Lariat |
| 1999-2003 | Ford | F-250 Super Duty | XL |
| 1999-2003 | Ford | F-250 Super Duty | XLT |
| 2003 | Ford | F-350 Super Duty | King Ranch |
| 1999-2003 | Ford | F-350 Super Duty | Lariat |
| 1999-2003 | Ford | F-350 Super Duty | XL |
| 1999-2003 | Ford | F-350 Super Duty | XLT |
$500.00
A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection. This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has built-in resonance chambers to catch un-wanted air intake noises. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This filter has a massive 5" round flange and is 8" tall with an inverted top and features our pre-oiled Pro 5R media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel T-bolt clamps are used for durability and provide the best corrosion resistance possible. Momentum GT intakes are designed with fewer parts for a quick and simple installation
Installation Instructions- 5 Layer Performance Air Filter
- Premium Hardware
- 1-Piece Housing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Dodge | Challenger | SRT Hellcat |
| 2017-2020 | Dodge | Charger | SRT Hellcat |
| 2020-2023 | Dodge | Charger | SRT Hellcat Widebody |
$522.00
The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory headlamp cold air inlet location on the driverside to capture the coolest air available from the factory intake tract. This system uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit and incorporate the MAF sensor pad. A custom high temperature reinforced silicone elbow coupling is included for easy install with the supercharger breather line. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive f iner porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel T-bolt clamps and a reinforced silicone coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Installation Instructions- No Cutting Or Drilling On Factory Parts For Faster Installation
- Inspection of Filter Without Disassembly
- Roto Molded Intake Tube
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Dodge | Challenger | SRT Hellcat |
| 2017-2020 | Dodge | Charger | SRT Hellcat |
| 2020-2023 | Dodge | Charger | SRT Hellcat Widebody |
Showing 930/1974
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.