This MACH Force XP Hi-Tuck Axle-Back exhaust system is constructed of 2.5" mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and design of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This kit is a perfect solution for replacing damaged exhaust system components due to extreme weather, road grime or off-road driving.

• 2.5 IN Mandrel Bent 409 Stainless Steel Tubing
• 4 lbs. Lighter Then Stock
• Hassle-Free Installation
• Simple 1-Piece Design
• Free Flow Muffler
• Hi-Tuck Tip

This Part Fits:

aFe Power introduces an all new Rebel Series dual middle-side exit exhaust system for the 2016-2017 Nissan Titan with V8-5.6L engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 2-1/2" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system.

• Unique Dual 3.5 in. Black Stainless Steel Tips
• 2.5 in. Mandrel Bent Stainless Steel Tubing
• Bayonet Style Hangers For Secure Fit
• Complete w/Necessary Hardware
• Dual Mid-Side Exit System
• High Flow Muffler
• Aggressive Sound

This Part Fits:

This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" to 3-1/2" mandrel-bent 409 stainless steel and comes complete with free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. This system is finished off with a 304 stainless steel polished tip that creates the aggressive, high quality look your Titan needs.

• High Flow Stainless Steel Dual-In To Single-Out Muffler
• 2.5 in. To 3.5 in. Mandrel Bent Stainless Steel Tubing
• Single 4.5 in. Polished Stainless Steel Tip
• Bayonet Style Hangers For Secure Fit
• Complete w/Necessary Hardware
• Single Side Exit

This Part Fits:

This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" to 3-1/2" mandrel-bent 409 stainless steel and comes complete with free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. This system is finished off with a 304 stainless steel polished tip that creates the aggressive, high quality look your Titan needs.

• High Flow Stainless Steel Dual-In To Single-Out Muffler
• 2.5 in. To 3.5 in. Mandrel Bent Stainless Steel Tubing
• Single 4.5 in. Black Stainless Steel Tip
• Bayonet Style Hangers For Secure Fit
• Complete w/Necessary Hardware
• Single Side Exit

This Part Fits:

aFe Power introduces an all new Rebel Series dual middle-side exit exhaust system for the 2004-2015 Nissan Titan with V8-5.6L engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 2-1/2" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2" Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2" diameter black 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

• Middle Exit Dual Polished Stainless Steel Tips w/aFe Power Logo
• High Flow Stainless Steel Dual-In To Single-Out Muffler
• Bayonet Style Hangers For Secure Fit
• Mandrel Bent Stainless Steel Tubing
• Complete w/Necessary Hardware
• Heavy Duty Band Clamps
• Passenger Side Exit
• Aggressive Sound

This Part Fits:

Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface eliminating leak paths. A straight through designed; free flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

• Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• OE Hanger Locations
• Free-Flow Muffler
• Aggressive Sound

This Part Fits:

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.

• Dual 4 in. Round Polished 304 Stainless Steel Tips
• Mandrel Bent 409 Stainless Steel Tubing
• High Flow Stainless Steel Muffler
• No Modification Necessary
• Hassle Free Installation
• 2 Year Limited Warranty
• Includes All Hardware
• 100% Hand TIG Welded
• Hand Brushed Teeth

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN Mandrel-Bent 409 Stainless Steel Tubing
• Acoustically Tuned Expansion Chamber for a Deep Exhaust Tone
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN Mandrel-Bent 409 Stainless Steel Tubing
• Acoustically Tuned Expansion Chamber for a Deep Exhaust Tone
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a throaty sound. This system produces a throaty sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 409 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a mild sound. Finishing off this exhaust system is a 4-1/2 IN diameter black 304 stainless steel clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN - 3 IN Mandrel-Bent 409 Stainless Steel Tubing
• 4-1/2 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN Mandrel-Bent 409 Stainless Steel Tubing
• All Necessary Hardware is Included for a Hassle-Free Installation
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 2-1/2" diameter 304 stainless steel clamp-on exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• 2-1/2" Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tip
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 2-1/2" Mandrel-Bent 409 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Release the untapped horsepower, torque and sound from your Toyota Tacoma L4-2.7L / V6-3.5L with aFe POWER Mach Force Xp exhaust system. Constructed from 2-1/2" to 3" mandrel bent 409 stainless steel for improved flow and long-lasting performance, the system is 100% hand MIG-welded by certified craftsmen for race proven strength and durability. The Mach Force Xp system features a high-flow, straight through designed, 409 stainless steel muffler for improved performance gains while delivering an aggressive tone. The Mach Force Xp is finished off with a 4-1/2" diameter, stainless-steel exhaust tip for a custom look and includes quality hardware and clamps for a hassle-free install. Flow and Performance: This Mach Force-Xp Series exhaust system is constructed of 2-1/2" and 3" mandrel bent 409 stainless steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: A high-flow, straight through designed 409 stainless steel 18" length muffler improves performance gains across the power band while producing an aggressive tone. 4-1/2" Exhaust Tip: Finishing off this system is a 4-1/2" black, angle-cut, stainless steel exhaust tip w/ laser-cut aFe POWER badge for quality brand recognition and a custom-styled look. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Installation is a Snap: This Mach Force-Xp exhaust system uses all factory mounting locations providing stability and a hassle-free installation.

• 100 Percent Hand MIG-Welded For Long Lasting Quality
• High Flow Straight Thru Muffler For Increased Gains
• Mandrel Bent 409 Stainless Steel Tubing
• Stainless Steel Exhaust Tip w/aFe Logo
• Quality Hardware and Clamps
• Hassle-Free Installation

This Part Fits:

This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" dual MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, the cat-back exhaust system resulted in gains up to + 9 horsepower and + 16 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 3-1/2" diameter black tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2" Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2" diameter black 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

• High Quality Band Clamps For Leak-Free Seal
• Mandrel Bent Stainless Steel Tubing
• High-Flow Stainless Steel Muffler
• Complete w/Necessary Hardware
• Passenger Side Exit System
• Hassle Free Installation
• Aggressive Sound

This Part Fits:

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

• Unique Dual Center Exit Exhaust System
• Mandrel Bent Stainless Steel Tubing
• High-Flow Stainless Steel Muffler
• Hassle Free Installation
• Bolt-On Installation
• Hardware Included

This Part Fits:

aFe power introduces the MACH Force-Xp cat-back exhaust system for the Toyota Tacoma with V6-3.5L engine. This cat-back exhaust is constructed out of 3 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4.5 diameter black tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style.

• Reuses Factory Mounting Locations For A Hassle-Free Installation
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• Straight Through Design Free-Flowing Stainless Steel Muffler
• High Quality Flange And Band Clamps Improve Sealing Surface
• Produces An Astonishing 9 HP And 15 ft./lbs. Torque

This Part Fits:

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

• Mandrel Bent 409 Stainless Steel Tubing
• Factory Mounting Locations
• Hassle Free Installation
• 304 Stainless Steel Tip
• 2 Year Limited Warranty
• Free-Flowing Muffler
• 409 Stainless Steel
• Hardware Included
• Aggressive Sound
• Mandrel-Bent

This Part Fits:

This MACH Force XP Hi-Tuck Cat-Back exhaust system is constructed of 2.5 IN mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response.

• Fits Slip-Fit And flange-Fit Catalytic Converter
• Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• OE Hanger Locations
• Free-Flow Muffler
• Aggressive Sound

This Part Fits:

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Black Stainless Steel Tip
• Hassle Free Installation
• 2 Year Limited Warranty
• 409 Stainless Steel
• OE Hanger Locations
• Free Flow Muffler
• Aggressive Sound
• 50 State Legal
• Mandrel Bent

This Part Fits:

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

• 3 IN Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• 2 Year Limited Warranty
• 409 Stainless Steel
• OE Hanger Locations
• Free Flow Muffler
• Aggressive Sound
• 50 State Legal
• Mandrel Bent
• Polished Tip

This Part Fits:

aFe power introduces the MACH Force-Xp cat-back exhaust system for your Toyota Tacoma. This cat-back exhaust is constructed out of 2-1/2 IN 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. Finishing off this exhaust is a 4 IN diameter polished tip. The tip comes with a laser-etched aFe Power logo for an aggressive style.

• High-Flow Muffler Absorbs High Pitch Tones and Produces a Powerful Sound Includes 4 IN Diameter Polished Tip
• Constructed from 2-1/2 IN Mandrel-Bent Tubing for Maximum Flow
• OE-Style Flange and Band Clamps for a Leak-Free Seal
• +3 HP & +4 Lbs. x Ft. TQ

This Part Fits:

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• 26 HP Gain/30 ft./lbs. Torque Gain
• Hassle Free Installation
• 2 Year Limited Warranty
• OE Hanger Locations
• Free Flow Muffler
• Aggressive Sound
• 50 State Legal
• Mandrel Bent
• Polished Tip

This Part Fits:

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• 26 HP Gain/30 ft./lbs. Torque Gain
• Hassle Free Installation
• 2 Year Limited Warranty
• OE Hanger Locations
• Free Flow Muffler
• Aggressive Sound
• 50 State Legal
• Mandrel Bent
• Black Tip

This Part Fits:

This DPF-Back exhaust system is constructed of 5" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 7" diameter black 304 stainless steel clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 5" Mandrel-Bent 409 Stainless Steel Tubing
• 7" Diameter Black 304 Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 3 IN Mandrel-Bent 409 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This DPF-back exhaust system is constructed of 5" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 6" diameter polished 304 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability. This system fits: Double Cab / Short-Bed - 149.4" Wheelbase, Crew Cab / Short-Bed - 158.9" Wheelbase, Double Cab / Long-Bed - 162.4" Wheelbase, Crew Cab / Long-Bed - 172" Wheelbase

• 6" Diameter Polished 304 Stainless Steel Intercooled Clamp-On Exhaust Tip
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 5" Mandrel-Bent 409 Stainless Steel Tubing
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

4" 409 Stainless Steel Construction: This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability.High-Flow 409 Stainless Steel Muffler: This system features a high-flow 409 stainless steel muffler, producing a deep sound. 5" Diameter Polished Intercooled Exhaust Tip: Finishing off this exhaust system is a 5" diameter polished 409 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Interlock Flex Pipe: This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.This item fits: Crew Cab/Short Bed ( 69.3" Box), 143.5" Wheelbase, Crew Cab/Long Bed (78.8" Box), 143.5" Wheelbase, Extended Cab/Long Bed (78.8" Box) 153" WheelbaseEmissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.

• 5 IN Diameter Black 409 Stainless Steel Intercooled Clamp-On Exhaust Tip
• Constructed from 4 IN Mandrel-Bent 409 Stainless Steel Tubing
• Hardware is Included for a Hassle-Free Installation
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Massive 4.5 in. Out Powder Coated Exhaust tip
• Hassle Free Installation
• Factory Hanger Locations
• 2 Year Limited Warranty
• All Hardware Included
• No Cutting Required
• High Flow Muffler
• OE Style Hangers
• Aggressive Sound
• 50 State Legal

This Part Fits:

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Bayonet Style Hangers For Easy Installation
• Polished Stainless Tip Included
• 2 Year Limited Warranty
• High Flow Muffler
• Maximum Flow

This Part Fits: