This mid-pipe exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system produces a throaty sound unleashing all available horsepower and torque. Utilizing factory style flanges and hanger this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flanges and Hanger for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This system features high-flow stainless steel mufflers, producing a deep sound while unleashing all available horsepower and torque. Utilizing factory style flanges and hangers, this system is a direct bolt-on which requires no cutting or modifications for a hassle-free installation. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. Included in this kit are two key fob remotes, control module, valve motor, and all necessary wiring to provide a simple installation which requiring no cutting of any wires, or interference of the automobile's electronics. A mitered merge is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Includes Electronically Controlled Valve Before the Exhaust Muffler to Quickly Switch Between Mild and Aggressive with the Push of a Button
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This kit includes key fob remotes, control module, valve motor, and all necessary wiring. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. A formed collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Includes Electronically Controlled Valve Before the Exhaust Muffler to Quickly Switch Between Mild and Aggressive with the Push of a Button
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4" diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded for race-proven strength and durability.

• Dual 4" Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• MIG-Welded for Race-Proven Strength and Durability
• Up to +13 HP and +12 lbs. x Ft. TQ.

This Part Fits:

This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4" diameter blue flame 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded for race-proven strength and durability.

• Dual 4" Diameter Blue Flame 304 Stainless Steel Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• MIG-Welded for Race-Proven Strength and Durability
• Up to +13 HP and +12 lbs. x Ft. TQ.

This Part Fits:

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system produces a powerful sound unleashing all available horsepower and torque. Optional tips are available. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• All Necessary Hardware is Included for a Hassle-Free Installation
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This system produced gains of up to +5 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a throaty sound. Finishing off this exhaust system are dual 4-1/2" diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a throaty sound unleashing all available horsepower and torque. Some cutting will be required, see instruction sheet for further information. Utilizing factory style flanges and hangers this system mounts directly to factory mounting locations for a hassle-free installation.A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Dual 4-1/2" Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Up to +5 HP and +7 lbs. x Ft. TQ.
• Must Cut OE Exhaust

This Part Fits:

This system produced gains of up to +6.45 HP and +8.12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2" diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Dual 4-1/2" Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Up to +6 HP and +8 lbs. x Ft. TQ.

This Part Fits:

This system produced gains of up to +6.45 HP and +8.12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2" diameter carbon fiber 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Dual 4-1/2" Diameter Carbon Fiber 304 Stainless Steel Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Up to +6 HP and +8 lbs. x Ft. TQ.

This Part Fits:

3" 304 Stainless Steel Construction: This system is constructed of 3" mandrel-bent 304 stainless steel tubing for maximum strength and durability.Installation: Utilizing a hanger and factory style flanges, this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.

• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 3 Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flanges and Hanger for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This system produced gains of up to +12 HP and +15 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a mild sound. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 3 IN - 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Up to +12 HP and +15 lbs. x Ft. TQ.

This Part Fits:

This system produced gains of up to +10 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 3 IN - 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Up to +10 HP and +12 lbs. x Ft. TQ.

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN - 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel polished mufflers, producing a deep sound. The mufflers have a polished finish for ultimate corrosion resistance. Finishing off this exhaust system are dual 4 IN diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN - 2-1/4 IN Mandrel-Bent 304 Stainless Steel Tubing
• Dual 4 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Takeda exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system provides a precise fitment and a hassel-free install.

• All Hardware and Clamps are Included for a Hassle-Free Installation
• Oversize Mandrel-Bent Stainless Steel Tubing for Maximum Flow
• Includes a High-Flow Stainless Steel Muffler and Resonator
• 100% MIG-Welded for Strength and Durability

This Part Fits:

aFe is proud to introduce an all new Takeda dual cat-back exhaust system for the 2015-2020 Subaru WRX and WRX STI with the H4-2.0L/2.5L (t) engines. This performance cat-back exhaust system is constructed out of 3" into dual 2-1/4" mandrel-bent 304 stainless steel tubing and incorporates a mitered merge to evenly distribute exhaust gases resulting in added horsepower and torque. In testing, this system resulted in gains up to +14 horsepower and +22 lbs. x ft. of torque verified by our in house dyno. This cat-back exhaust utilizes dual high-flow 304 stainless steel mufflers to improve performance across the power band while maintaining an aggressive sound. To finish off the exhaust are quad, 304 stainless steel, high-luster, polished 3-1/2" diameter tips. The tips come with laser-etched Takeda logos for an aggressive style. This unit is 100% TIG-Welded by certified craftsmen for race proven strength and durability and is a direct bolt-on system that requires no modifications. All necessary hardware is included for a hassle-free installation.

• Hassle Free Installation
• High Quality Hardware
• 100% TIG-Welded
• Direct Bolt On

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 3 IN diameter 304 stainless steel polished clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Dual 3 IN Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• All Necessary Hardware is Included for a Hassle-Free Installation
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. The mufflers has a polished finish for ultimate corrosion resistance. Finishing off this exhaust system are dual 4-1/2 IN diameter blue flame 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN - 2-1/4 IN Mandrel-Bent Brushed Finished 304 Stainless Steel Tubing
• Dual 4-1/2 IN Diameter Blue Flame 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% TIG-Welded for Strength and Durability

This Part Fits:

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while maintaining a great tone. aFe carefully engineered this system to maintain distinct exhaust tones. All exhaust systems are engineered and manufactured in our Corona California manufacturing facility. All systems use factory mounting locations providing stability and hassle free installation. High quality band clamps are used for a complete 360 degree sealing surface. Dual free flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torqye.

• Massive Oval Double Wall Tips
• Simple Installation
• Aggressive Sound
• Leak Free Seal

This Part Fits:

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

• Polished 304 Stainless Steel Free Flowing Muffler
• Simple Installation
• Leak Free Seal

This Part Fits:

aFe is proud to introduce the Takeda Mid-Pipe Exhaust System for the 2013-2014 Honda Accord Coupe EX-L V6. In testing, this system produced an additional 2 horsepower and 3 lb. x ft. torque when added to the Takeda Axle-Back Exhaust System (P/N 49-36607). This exhaust pipe starts out with OE-style flanges and uses 2.5" tubing which improves performance across the power band while maintaining a great tone. TIG-welded and brushed finish mandrel-bent, 304 stainless steel tub ing is used for maximum strength and durability. This system is equipped with a 4" diameter 304 stainless steel resonator for maximum flow and eliminating exhaust drone. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary.

• Simple Installation
• Aggressive Sound
• Leak-Free Seal

This Part Fits:

Add power, sound and taste to your Accord with this Takeda cat-back system. 2-1/2" to 1-3/4" mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +13 HP and +16 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, oval, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.

• Brush Finished 304 Stainless Steel For Performance and Good Looks
• Dual Stainless Steel Mufflers Delivers A Deep Aggressive Tone
• Dual Oval Tips w/Etched Takeda Logo Give A Custom Appearance
• 100% Hand TIG-Welded For Strength and Durability

This Part Fits:

aFe is proud to introduce the new Takeda Dual Cat-Back Exhaust System for the 13-14 Honda Accord LX, EX, EX-L Sedan L4-2.4L. In recent testing this system produced 13 horsepower and 16 lbs. x ft. of torque. This exhaust starts out with an OE style flange and uses 2.5in. mandrel bent 304 stainless steel tubing and merges into dual 2.5in. tubing which improves performance across the power band while maintains a great tone. The dual, high flow, polished 304 stainless steel mufflers give an aggressive sound at high RPMs, yet maintaining a subtle tone at cruising speeds. To finish off this 100% TIG-welded exhaust are dual, Takeda laser etched, double wall, angle cut 304 stainless steel tips. This exhaust is designed to convert the standard L4 single exhaust into a sporty dual exhaust. It is a direct bolt on system which requires no cutting or drilling and includes all necessary hardware for a hassle free installation.

• Quality OE Style Flanges/Band Clamps For Complete Sealing Surface
• Mitered Collectors Decreases Turbulence
• Single To Dual Exhaust Conversion
• Includes All Necessary Hardware
• Hassle Free Installation
• No Cutting Or Drilling
• Direct Bolt-On System
• Aggressive Sound

This Part Fits:

aFe is proud to introduce the new Takeda Axle Back Exhaust System for the 2013-2016 Honda Accord Sport Sedan L4-2.4L. In recent testing this system produced 7 horsepower and 7 lbs. x ft. of torque. This exhaust starts out with an OE style flange and uses 2.25in tubing that merges into dual 1.75in tubing which improves performance across the power band while maintaining a great tone. TIG-welded and brushed finish mandrel bent 304 stainless steel for maximum strength and durability, this system is equipped with dual high flow, polished mufflers for maximum flow and performance. To finish off this exhaust are dual laser etched, double wall, angle cut 304 stainless steel tips. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

• Includes Laser Etched; Double Wall; Angle Cut Polished Steel Tips
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• Equipped w/Dual High Flow Mufflers For Maximum Performance
• Smooth Bends Allow For Low Increased Horsepower And Torque
• Produces An Astonishing 7 HP And 7 ft./lbs. Of Torque
• Uses Factory Mounting Locations For Easy Installation
• 2.25 in. To 1.75 in. Mandrel Bent Tubing

This Part Fits:

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

• Polished 304 Stainless Steel High Flow Muffler
• 3.5 in. Dia. Slash cut Double Wall Tip
• 2.5 in. Dia. Stainless Steel
• 100% Hand TIG Welded Headers
• No Modification Necessary
• Hassle Free Installation
• Factory Hanger Locations
• 2 Year Limited Warranty
• 3 ft./lbs. Torque Gain
• 3 Horsepower Gain

This Part Fits:

This DPF-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 4 IN diameter polished 304 stainless steel clamp-on exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This DPF-back exhaust gives you the option for a side exit or rear exit tailpipe. Both options will evacuate the exhaust gasses from under the vehicle. Utilizing a factory style hanger this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• 4 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tip with Side or Rear Exit Tail Pipe
• Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Hanger mounting Points for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This DPF-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 4 IN diameter black 304 stainless steel clamp-on exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This DPF-back exhaust gives you the option for a side exit or rear exit tailpipe. Both options will evacuate the exhaust gasses from under the vehicle. Utilizing a factory style hanger this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• 4 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tip with Side or Rear Exit Tail Pipe
• Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Hanger mounting Points for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features dual 6” round x 18” long high-flow 304 stainless steel mufflers, producing a deep sound with minimal interior drone. This system produces a deep sound unleashing all available horsepower and torque with little to no unwanted interior cabin drone. Utilizing factory hangers, this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits: