aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

• Polished 304 Stainless Steel Free Flowing Muffler
• Simple Installation
• Leak Free Seal

This Part Fits:

This system is constructed of durable mandrel-bent 4" to dual 3" 304 stainless steel tubing for maximum corrosion resistance. Mandrel-bent tubing for maximum air flow and low turbulence; increasing torque, horsepower and improved throttle response. This system features a high-flow stainless steel muffler, producing a aggressive sound. Muffler finish may vary. This system produces an aggressive sound unleashing all available horsepower and torque. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. This kit includes key fob remotes, control module, valve motor, and all necessary wiring. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Includes Electronically Controlled Valve Before the Exhaust Muffler to Quickly Switch Between Mild and Aggressive with the Push of a Button
• Constructed out of 4" and 3" Mandrel-Bent 304 Stainless Steel Tubing
• All Necessary Hardware is Included for a Hassle-Free Installation
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 12 IN diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This system incorporates factory style exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Includes Factory Style Exhaust Valves (Using Factory Motor, Not Included)
• Dual 12 IN Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 12 IN diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This system incorporates factory style exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Includes Factory Style Exhaust Valves (Using Factory Motor, Not Included)
• Dual 12 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tips
• Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 3 IN - 3-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter 304 stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo plate riveted on for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This system incorporates factory style exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Includes Dual 4 1/2" Dia. Black, Stainless Steel Tips for an Aggressive Style
• Constructed from 3 IN - 3-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Acoustically Tuned Expansion Chamber for a Deep Exhaust Tone
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a 3-1/2 IN diameter polished 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• 3-1/2 IN Diameter Polished 304 Stainless Steel Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a 3-1/2 IN diameter black 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• 3-1/2 IN Diameter Black 304 Stainless Steel Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel black muffler, producing a mild sound. The muffler has a black finish for ultimate corrosion resistance. This system produces a mild sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Finishing off this exhaust system are dual 6 IN diameter 304 stainless steel exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This system retains the factory crossover balance tube designed to equalize and distribute exhaust pulses reducing drone and improving sound. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 3 IN - 3-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Dual 6 IN Diameter Black 304 stainless steel Exhaust Tips
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

The Vulcan’s unique X / H-pipe design improves the RAM TRX exhaust flow direction and utilizes no mufflers delivering more power and an aggressive tone throughout the RPM range without interfering with driver or passengers hearing in the cab. Both mitered merge x-pipe and crossover balance tube replaces mufflers to evenly distribute exhaust pulses which maximizes scavenging, reduces drone and improves sound. On the throttle, this system produces an aggressive, deep exterior sound releasing horsepower and torque. At cruising RPM’s the Vulcan maintains sound quality in the cab. MIG-welded, 3 IN mandrel-bent 304 stainless steel tubing increases to 3-1/2” diameter tailpipes for a “Large Bore” style exhaust. Dual 6 IN large diameter, 304 stainless steel exhaust tips with matte black finish features laser-etched aFe POWER logo’s for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.

• Incorporated X-Pipe and Crossover Balance Tube to Equalize and Evenly Distribute Exhaust Pulses Reducing Drone and Improve Sound
• Constructed from 3 IN - 3-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• Dual 6 IN Diameter Black 304 Stainless Steel Exhaust Tips
• Muffler Delete System for an Aggressive Exhaust Note
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This system produced gains of up to +22 HP and +26 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel, producing an aggressive sound. Muffler finish may vary. Finishing off this exhaust system are dual 5" diameter polished 304 stainless steel clamp-on exhaust tips. The tips feature an aFe POWER logo plate riveted on for a unique style. Gemini XV exhaust features an electronically controlled exhaust cutout valve to quickly switch between mild and aggressive tones at the push of a button. This kit includes two key fob remotes, control module, valve motor, and all necessary wiring. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Includes Electronically Controlled Valve Before the Exhaust Muffler to Quickly Switch Between Mild and Aggressive with the Push of a Button
• Dual 5 IN Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 3" Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Up to +22 HP and +26 lbs. x Ft. TQ.

This Part Fits:

The Scorpion Aluminized Hi-Tuck "Rock Basher" (RB) Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 18" length chambered muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

• Mandrel Bent Aluminized Steel
• OE Style Bayonet Hangers
• Two Piece Design
• Performance Tip

This Part Fits:

The Scorpion Aluminized Hi-Tuck "Rock Basher" (RB) Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 18" length chambered muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

• Mandrel Bent Aluminized Steel
• OE Style Bayonet Hangers
• Two Piece Design
• Performance Tip

This Part Fits:

The Scorpion Aluminized Hi-Tuck "Rock Basher" (RB) Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 18" length chambered muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

• Mandrel Bent Aluminized Steel
• OE Style Bayonet Hangers
• Two Piece Design
• Performance Tip

This Part Fits:

aFe's all new Scorpion series cat-back exhaust system for your 2007- 2017 Toyota FJ Cruiser with the V6-4.0L engine will get you there with speed and style. Designed from 2-1/2" mandrel bent, aluminized steel, this exhaust system offers greater flow to deliver more torque and horsepower than the factory exhaust. This 3-piece designed cat-back system utilizes a less-restricting, baffled muffler to improve your FJ's performance while maintaining a deep, smooth tone. 100% hand MIG-welded by certified craftsmen for proven quality and durability, the Scorpion exhaust system includes a black, high-temp powder coated 4 ½" tip to give your FJ a clean, finished look. Flow and Performance This Scorpion Series exhaust system is constructed of 2-1/2" mandrel bent aluminized steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: 18" less restrictive, ba ffled muffler absorbs high pitch tones producing a powerful, aggressive, smooth tone under load and features an anti-corrosion protective coating. 4-1/2" dia. Stainless Steel Exhaust Tip: This exhaust system is finished off with a 4-1/2" dia. high-temp stainless steel exhaust tip that gives your FJ Cruiser a stylish, finished look. Leak-Free Seal: High quality band clamps and hardware are used for a complete 360-degree sealing surface. Perfect Fit: OE-style bayonet hangers are used to maintain a stable exhaust pipe location during any driving conditions. The bayonet tip holds the hanger bushin g in place for a long-lasting, OE-style fit. This makes for an easy installation with no cutting required.

• Aluminized Steel For Durability/Value/Functionality
• 100 Percent Hand MIG-Welded For Durability
• 4.5 in. Polished Stainless Steel Tip
• High Flow Aluminized Steel Muffler
• High Quality Hardware and Clamps
• 2.5 in. Mandrel Bent Tubing

This Part Fits:

aFe's all new Scorpion series cat-back exhaust system for your 2007- 2017 Toyota FJ Cruiser with the V6-4.0L engine will get you there with speed and style. Designed from 2-1/2" mandrel bent, aluminized steel, this exhaust system offers greater flow to deliver more torque and horsepower than the factory exhaust. This 3-piece designed cat-back system utilizes a less-restricting, baffled muffler to improve your FJ's performance while maintaining a deep, smooth tone. 100% hand MIG-welded by certified craftsmen for proven quality and durability, the Scorpion exhaust system includes a black, high-temp powder coated 4 ½" tip to give your FJ a clean, finished look. Flow and Performance This Scorpion Series exhaust system is constructed of 2-1/2" mandrel bent aluminized steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: 18" less restrictive, ba ffled muffler absorbs high pitch tones producing a powerful, aggressive, smooth tone under load and features an anti-corrosion protective coating. 4-1/2" dia. Stainless Steel Exhaust Tip: This exhaust system is finished off with a 4-1/2" dia. high-temp stainless steel exhaust tip that gives your FJ Cruiser a stylish, finished look. Leak-Free Seal: High quality band clamps and hardware are used for a complete 360-degree sealing surface. Perfect Fit: OE-style bayonet hangers are used to maintain a stable exhaust pipe location during any driving conditions. The bayonet tip holds the hanger bushin g in place for a long-lasting, OE-style fit. This makes for an easy installation with no cutting required.

• Aluminized Steel For Durability/Value/Functionality
• 100 Percent Hand MIG-Welded For Durability
• High Flow Aluminized Steel Muffler
• 4.5 in. Black Stainless Steel Tip
• High Quality Hardware and Clamps
• 2.5 in. Mandrel Bent Tubing

This Part Fits:

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

• Bayonet OE Style/Welded-On Hangers
• Increased Flow And Performance
• 5 in. Aluminized Steel Tubing
• High Quality Band Clamps
• Hassle Free Installation
• 2 Year Limited Warranty
• All Hardware Included
• Street Legal Exhaust
• Aggressive Sound
• Direct Bolt On
• 50 State Legal

This Part Fits:

The aFe ATLAS turbo down-pipe is engineered to outflow and outperform the restrictive, OE down-pipe on your 2004.5-2010 Chevy Silverado or GMC Sierra 2500HD/3500HD with the Duramax V8 6.6L turbo diesel. The 3" mandrel bent steel tubing offers smoother transition bends for increased airflow, delivering quicker turbo spool times. CNC machined V-band inlets and outlets ensure an OE-style, 360 degree sealing surface. Coated with a black finish, the ATLAS turbo down-pipe is wrapped with thermal header tape to reduce EGT's even in the most extreme environments. Flow and Performance: The ATLAS turbo down-pipe is made from 3" mandrel bent steel tubing offering smoother transition bends for low turbulence to deliver quicker turbo spool times. Perfect Fit: The ATLAS turbo down-pipe is an upgrade to the OE down-pipe and utilizes the factory mounting locations for true bolt-on performance. Leak-Free Seal: High quality OE style CNC machined V-band flanges are used for a complete 360 degree sealing surface. Finish: This down pipe is coated with a black finish and wrapped in thermal header tape for better insulation. This reduces EGT's and under hood temperatures. Note: This system is not currently CARB exempt or available for sale in California, and cannot be used on any vehicle registered with the California Department of Motor Vehicle. This item in not legal in NY for use on vehicles with CA emissions.

• Mandrel Bent Black Finished Steel For Long Lasting Good Looks
• Replaces OE Down-Pipe For True Bolt-On Performance
• Wrapped in High Temp Thermal Tape For Insulation
• CNC Machined V-Band Inlet/Outlet Flange
• Leak Proof Seal

This Part Fits:

Interested in a new exhaust system for your 6.7 L Power Stroke. Check out the ATLAS DPF-Back exhaust system by aFe. Constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included is a massive 7 in. wrinkle-black powder-coated 304 stainless steel tip with laser-cut stainless steel aFe power badge. The tip features a drain port on the bottom to keep rust and corrosion away. A unique stainless steel laser-cut aFe Power logo plate is rived on for an aggressive style. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

• High Quality Band Clamp/OE Style Bayonet Hangers For Secure Fit
• Utilizes All Factory Mounting Locations
• Mandrel Bent Aluminized Steel Tubing
• Quick Hassle Free Installation
• OE Style Flanges

This Part Fits:

This Atlas Cat-Back exhaust system is constructed of 4 in. mandrel-bent steel. Comes with Tubing; OE Style bayonet hangers; band clamps and all hardware necessary for a hassle free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Installation is a snap. This system uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface eliminating leak paths. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions.

• Increased Torque 28 ft./lbs.
• Hassle Free Installation
• 2 Year Limited Warranty
• OE Hanger Locations
• Free Flow Muffler
• Aluminized Steel
• Aggressive Sound
• Increased 322 HP
• 50 State Legal
• Mandrel Bent
• Black Tip

This Part Fits:

This Atlas Cat-Back exhaust system is constructed of 4 in. mandrel-bent steel. Comes with Tubing; OE Style bayonet hangers; band clamps and all hardware necessary for a hassle free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Installation is a snap. This system uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface eliminating leak paths. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions.

• Increased Torque 28 ft./lbs.
• Hassle Free Installation
• 2 Year Limited Warranty
• OE Hanger Locations
• Free Flow Muffler
• Aluminized Steel
• Aggressive Sound
• Increased 322 HP
• 50 State Legal
• Mandrel Bent
• Black Tip

This Part Fits:

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

• Bayonet OE Style/Welded-On Hangers
• Increased Flow And Performance
• 5 in. Aluminized Steel Tubing
• High Quality Band Clamps
• Hassle Free Installation
• 2 Year Limited Warranty
• All Hardware Included
• Street Legal Exhaust
• Aggressive Sound
• Direct Bolt On
• 50 State Legal

This Part Fits:

This Atlas Cat-Back exhaust system is constructed of 4 in. mandrel-bent steel. Comes with Tubing; OE Style bayonet hangers; band clamps and all hardware necessary for a hassle free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Installation is a snap. This system uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface eliminating leak paths. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions.

• Increased Torque 28 ft./lbs.
• Hassle Free Installation
• 2 Year Limited Warranty
• OE Hanger Locations
• Free Flow Muffler
• Aluminized Steel
• Aggressive Sound
• Increased 322 HP
• 50 State Legal
• Mandrel Bent
• Polished Tip

This Part Fits:

This Atlas Cat-Back exhaust system is constructed of 4 in. mandrel-bent steel. Comes with Tubing; OE Style bayonet hangers; band clamps and all hardware necessary for a hassle free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Installation is a snap. This system uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface eliminating leak paths. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions.

• Increased Torque 28 ft./lbs.
• Hassle Free Installation
• 2 Year Limited Warranty
• OE Hanger Locations
• Free Flow Muffler
• Aluminized Steel
• Aggressive Sound
• Increased 322 HP
• 50 State Legal
• Mandrel Bent
• Black Tip

This Part Fits:

ATLAS 5 IN Aluminized Steel DPF-Back Exhaust System w/Polished Tip RAM Diesel Trucks 19-26 L6-6.7L (td)

• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 5 IN Mandrel-Bent Aluminized Steel Tubing
• 7 IN Diameter Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

ATLAS 5 IN Aluminized Steel DPF-Back Exhaust System w/Black Tip RAM Diesel Trucks 19-26 L6-6.7L (td)

• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 5 IN Mandrel-Bent Aluminized Steel Tubing
• 7 IN Diameter Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

The Large Bore HD Performance DPF-Back exhaust features 4" 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonnet style hangers make sure this system installs cleanly and easily.

• Includes High Quality Band Clamps
• Hassle Free Installation
• Aggressive Sound
• Direct Bolt On
• Street Legal

This Part Fits:

aFe Control is proud to release the PFADT Series, SKF performance wheel bearing for 1997-2008 Corvette C5/C6. This performance wheel bearing is designed to improve the performance, cornering and stability characteristics that race and super cars demand. The SKF X-Tracker is a performance-engineered hub unit consisting of a double row angular contact ball bearing arrangement in which the outboard row has a larger diameter and contains more balls than the inboard row. Designed as a direct fit installation, no modifications is necessary. The performance wheel bearing can be used with factory shock absorbers, or for a even better ride, try our Johnny O'Connell signature series shock upgrade.

• Powdercoat Gloss Silver For Unbeatable Looks And Durability
• Engineered To Optimize The Factory Shock Absorber Damping
• Optimized Design For Both V6 and V8 Applications
• 1 To 1.25 in. Of Drop

This Part Fits:

This Part Fits:

This Twisted Steel Loop Delete Down Pipe replaces the factory loop section on the Jeep JL exhaust after the catalytic converter to accommodate most aftermarket long-arm lift kits that interfere with the factory exhaust loop. Constructed from 2-1/2" mandrel bent, 409 stainless steel tubing, this loop delete works with the factory "Y-Pipe" to solve exhaust clearance issues with long-arm lift kits. Some cutting is required for removal of factory loop. Please review instruction sheet prior to installing. The factory exhaust loop on the driver's side comes into contact with most aftermarket long-arm lift kits on the Jeep JL. The Twisted Steel Loop Delete Down Pipe eliminates the bulky, factory loop and provides proper clearance on Jeeps with a long-arm lift kit. This down pipe is constructed of 2-1/2" mandrel-bent, 409 stainless steel tubing for smooth transitions of exhaust gas increasing exhaust velocity.

• Accommodates Long Arm Lift Kits
• Eliminates Bulky Loop Section
• Cutting Is Required
• MIG Welded

This Part Fits: