Fits select 2001-2010 Chevrolet Silverado and GMC Sierra 2500 HD/3500 models, and 2015-2017 Ford Transit-150, 250, and 350 vans.

The Air Lift 84290 is a direct replacement bellows-type air spring for the LoadLifter 5000 Ultimate series. This unit is designed to replace a single damaged or worn air spring to restore your vehicle's heavy-duty leveling capacity and ride quality. Unlike standard air springs, the Ultimate series features an internal jounce bumper, providing extra protection and allowing the spring to be safely used at 0 PSI in emergency situations.

Engineered for maximum durability, the bellow is constructed from sturdy rubber reinforced with synthetic fabric to handle high burst pressures. It features rustproof, high-strength composite end caps and a steel girdle ring to maintain shape and structural integrity under heavy loads.

• Manufacturer Part Number: 84290
• Construction: Fabric-reinforced rubber with steel girdle ring
• End Caps: Corrosion-resistant high-strength composite
• Internal Component: Integrated jounce bumper for bottom-out protection
• Compatibility: Replacement for LoadLifter 5000 Ultimate kits

Fits select 1970-2017 Chevrolet, Dodge, Ford, GMC, and Toyota vehicles. This genuine Air Lift 84264 replacement bellows is designed specifically for LoadLifter 5000 Ultimate air suspension systems, restoring the load-leveling performance and stability required for heavy towing and hauling.

Constructed for extreme durability, this air spring is built from rugged rubber with synthetic fabric reinforcement. It features high-strength, rustproof composite end caps and a steel girdle ring to withstand high burst pressures and maintain structural integrity under load. The integrated internal jounce bumper prevents the vehicle from bottoming out and protects the suspension during emergency low-pressure situations.

• Internal Jounce Bumper: Patented technology prevents bottoming out and absorbs road shock even with zero air pressure.
• Heavy-Duty Construction: Synthetic fabric-reinforced rubber provides maximum resistance against wear and environmental exposure.
• Corrosion Resistant: High-strength composite end caps ensure long-term durability in harsh conditions.
• Reinforced Design: Equipped with a steel girdle ring to maintain bellows shape under high pressure.
• Series: LoadLifter 5000 Ultimate
• Manufacturer Part Number: 84264

Fits select 1965-2008 Chevrolet, Dodge, Ford, and GMC models (5.9L).

Restore your vehicle's load-leveling capabilities with this Air Lift LoadLifter 5000 Ultimate replacement air spring (MPN 84201). This bellows-style spring is engineered as a direct replacement for damaged units within your existing LoadLifter 5000 Ultimate kit. It features a built-in internal jounce bumper, which provides a three-stage ride quality and allows the air spring to absorb shocks even with zero air pressure, protecting your vehicle from bottoming out under heavy loads.

• Manufacturer Part Number: 84201
• Constructed from heavy-duty rubber with synthetic fabric reinforcement
• Integrated internal jounce bumper for enhanced protection and ride quality
• Genuine high-strength, rustproof composite end caps
• Reinforced with a steel girdle ring to ensure high burst pressure
• Designed for extreme durability and maintenance-free operation
• Limited Lifetime Warranty

Fits select 1968-1996 Chevrolet and GMC C/K series pickups, Suburbans, Blazers, Jimmys, and G-series vans.

The Air Lift 1000 Air Spring Kit is a versatile load-support solution designed to improve ride quality and safety when towing or hauling. These adjustable air helper springs install directly inside your vehicle's factory coil springs to provide up to 1,000 lbs of load-leveling capacity. By supporting the vehicle's weight at the suspension, this kit effectively eliminates rear-end sag, reduces sway, and prevents bottoming out under heavy loads.

Constructed from rugged, durable molded materials, these air springs are fully adjustable via air pressure. Simply add air when hauling and decrease pressure for a comfortable factory-like ride when unloaded. This kit is ideal for supporting heavy cargo, leveling trailers, or providing additional front-end support for accessories like snowplows on 2WD applications.

• Provides up to 1,000 lbs. of load-leveling capacity (do not exceed manufacturer GVWR)
• Fully adjustable air pressure: typically 5-35 PSI for trucks/vans and up to 90 PSI for motorhome applications
• Reduces squat and improves braking and steering control while loaded
• Easy installation inside existing coil springs using common hand tools
• Includes air springs, air lines, easy-to-use air fittings, and all necessary mounting hardware
• Manufacturer Part Number: 81560
• Limited Lifetime Warranty and 60-day ride satisfaction guarantee

Fits select 1984-2006 Jeep Cherokee, Comanche, Grand Cherokee, Grand Wagoneer, Wagoneer, and Wrangler.

The Air Lift 1000 Air Spring Kit (MPN 80702) provides up to 1,000 lbs. of load-leveling capacity, specifically engineered to support your Jeep's suspension when towing trailers or hauling heavy cargo. By installing directly inside the factory coil springs, these air helpers effectively eliminate rear-end sag, reduce trailer sway, and prevent bottoming out on rough terrain. The air pressure is fully adjustable, allowing you to maintain a firm, stable ride when loaded and a soft, comfortable ride when empty.

• Load Capacity: Up to 1,000 lbs. of leveling support (do not exceed vehicle GVWR)
• Materials: Built from tough, molded polyurethane for maximum durability and puncture resistance
• Adjustability: Quick-connect air fittings for precision tuning of air pressure
• Installation: Mounts inside existing coil springs with common hand tools; includes fully illustrated manual
• Included Components: Air springs, air lines, Schrader valve, and all required mounting hardware
• MPN: 80702

Fits select 2014-2025 Ram 2500 and 3500 trucks.

The Air Lift 1000 Air Spring Kit (MPN 80532) provides up to 1,000 lbs of load-leveling capacity to eliminate rear-end sag, vehicle sway, and bottoming out. Engineered to install inside your vehicle's existing rear coil springs, these fully adjustable air springs allow you to tune your suspension for heavy towing or hauling and return to a soft ride when unloaded. This system provides much-needed support for heavy cargo, ensuring the vehicle remains level and the tires maintain a proper contact patch with the road.

Constructed from tough molded polyurethane, this kit is built for durability and reliable service under heavy-duty conditions. The air-adjustable design utilizes quick-connecting fittings for easy pressure management, ensuring your Ram 2500 or 3500 remains level and stable regardless of the load. This kit is a direct solution for improving ride quality and handling for heavy-duty Ram applications.

• Provides up to 1,000 lbs of load-leveling support (do not exceed vehicle GVWR)
• Constructed from tough molded polyurethane for long-term durability
• Fully adjustable air pressure for custom ride control
• Installs inside the factory coil springs with common hand tools
• Includes air springs, air lines, and all necessary installation hardware
• Manufacturer Part Number: 80532
• Limited Lifetime Warranty and 60-day ride satisfaction guarantee included

Fits 2005-2014 Ford Mustang Base, GT, Boss 302, Bullitt, and Shelby GT/GT500/GT500KR.

The Air Lift Performance Coilover Kit (MPN 79015) is a high-performance suspension solution engineered to provide the S197 Mustang platform with an aggressive stance and precision handling. Built around high-quality monotube dampers for superior heat dissipation, this kit offers a significant drop of 1" to 4" below factory height. Each kit features vehicle-specific valving and internal pressure settings to deliver a refined balance between track-day performance and daily driving comfort.

• Precision Tuning: 32-way damping adjustment allows for fine-tuning of the ride quality to suit your specific driving environment.
• Adjustable Stance: Threaded body dampers and adjustable lower mounts provide a height range of 1" to 4" below stock without compromising travel.
• Robust Construction: Lightweight anodized aluminum is used for the damper bodies, top mounts, locking collars, and spring perches to ensure corrosion resistance and durability.
• Direct Fitment: Engineered with vehicle-specific upper and lower mounts for a straightforward, bolt-on installation using factory mounting points.
• Air Conversion Path: These coilovers are designed to be compatible with Air Lift Performance coilover-to-air conversion systems for those who may want to upgrade to a full air suspension setup in the future.

Fits 2013-2017 Honda Accord and 2015-2020 Acura TLX (all trims including SH-AWD and Hybrid).

The Air Lift Performance 79014 coilover kit is engineered for enthusiasts seeking a precise static drop without sacrificing daily drivability. Featuring high-quality monotube dampers for superior heat dissipation and consistent performance, these coilovers provide a significant upgrade over factory suspension. Each kit utilizes vehicle-specific valving and mounting points to ensure a direct, bolt-on installation and optimized ride quality tailored to the Honda/Acura chassis.

Constructed with lightweight, anodized aluminum damper bodies, top mounts, locking collars, and spring perches, this kit is built to resist corrosion while maintaining structural integrity. The 32-way damping adjustment allows you to fine-tune your ride from street-comfortable to track-firm. Additionally, this system offers a unique upgrade path, designed to be compatible with a coilover-to-air conversion kit (available April 2, 2025) for those who eventually want to transition to a full air suspension setup.

• 32-way damping adjustment for precise ride control
• Monotube dampers for improved performance and heat management
• Adjustable drop heights from 1" to 4" below factory height
• Lightweight anodized aluminum damper bodies and hardware
• Vehicle-specific upper and lower mounts for a true bolt-on fit
• Pillowball upper mounts or vehicle-specific rubber mounts (application dependent)
• Manufacturer Part Number: 79014

Fits 2019-2024 BMW Z4 and Toyota GR Supra (sDrive30i / M40i / Base / Premium / A91 Edition).

The Air Lift Performance 79012 Coilover Kit is a complete suspension solution designed for enthusiasts seeking a lower stance and improved handling without sacrificing daily drivability. Built with high-quality monotube dampers for superior heat dissipation, this kit offers 32-way damping adjustment to fine-tune the transition between street comfort and track-ready stiffness. The threaded body dampers and lower mounts provide a significant range of adjustment, allowing for a drop of 1" to 4" below factory ride height.

Constructed for longevity in harsh environments, the assembly features lightweight, corrosion-resistant anodized aluminum damper bodies, top mounts, locking collars, and spring perches. Each kit is engineered with vehicle-specific valving and mounts to ensure an accurate bolt-on installation. For those looking to upgrade later, these coilovers are designed to be easily converted to a full air suspension system via a dedicated conversion kit (available April 2, 2025).

• 32-way damping adjustment for precise ride control
• High-quality monotube dampers for consistent performance and heat management
• Adjustable drop heights from 1" to 4" below factory height
• Anodized aluminum damper bodies and hardware for corrosion resistance
• Adjustable camber plates with pillowball upper mounts (application specific)
• Vehicle-specific valving and internal pressure for optimized ride characteristics
• Direct bolt-on installation with vehicle-specific upper and lower mounts
• Manufacturer Part Number: 79012

Fits 2014-2024 Infiniti Q50 and 2017-2022 Infiniti Q60 (including Hybrid, Red Sport 400, Luxe, and Sport models).

Air Lift Performance coilovers provide a high-performance static suspension solution for the Infiniti Q50 and Q60 platforms. Designed for enthusiasts seeking a significant drop in ride height without sacrificing daily driving comfort, this kit utilizes vehicle-specific mounts and valving to ensure a precise, bolt-on installation. The system features monotube dampers for superior heat dissipation and consistent performance during spirited driving.

The threaded bodies and lower mounts allow for a customizable drop range of 1 to 4 inches below factory height. Fine-tune your handling and ride quality with 32 levels of damping adjustment, allowing you to transition between a compliant street setting and a firm track-ready setup. These coilovers are built for longevity with lightweight, corrosion-resistant anodized aluminum components.

• Manufacturer Part Number: 79011
• 32-way adjustable damping for precise ride tuning
• High-quality monotube dampers for improved thermal efficiency
• Anodized aluminum damper bodies, top mounts, and locking collars
• Threaded body dampers offer 1" to 4" of drop height adjustment
• Vehicle-specific valving and internal pressure for balanced performance
• Compatible with future coilover-to-air conversion kits (available April 2, 2025)
• Includes vehicle-specific upper and lower mounts

Fits select 2018-2024 Tesla Model 3 and Model Y (Base, Long Range, Performance, Standard Plus, and Standard Range).

Air Lift Performance Coilovers (MPN 79009) provide a high-performance static suspension solution for Tesla owners seeking an aggressive stance without sacrificing ride quality. Built with vehicle-specific valving and internal pressures, these coilovers are engineered to balance daily driving comfort with sharp handling characteristics. The monotube damper design ensures superior heat dissipation during spirited driving, while the 32-way damping adjustment allows for precise fine-tuning of the ride quality.

Constructed for longevity and weight savings, this kit features lightweight, corrosion-resistant anodized aluminum damper bodies, top mounts, locking collars, and spring perches. The threaded body dampers and lower mounts provide an adjustable drop height of 1 to 4 inches below factory settings, allowing for a perfectly dialed-in ride height. For owners who eventually want the versatility of air, this kit is designed to be compatible with a coilover-to-air conversion kit available starting April 2, 2025.

• 32-way adjustable damping for fine-tuned rebound and compression
• High-quality monotube dampers for consistent performance and heat management
• Adjustable drop height from 1 inch to 4 inches below factory height
• Corrosion-resistant anodized aluminum bodies, mounts, and locking collars
• Vehicle-specific valving and mounts for a direct, bolt-on installation
• Compatible with future coilover-to-air conversion systems

Fits 2018-2024 Honda Accord (including EX, EX-L, LX, Sport, Touring, and Hybrid models).

The Air Lift Performance series coilover kit (MPN: 79008) provides a complete suspension solution for 10th and 11th generation Honda Accord owners seeking a precise, static drop without sacrificing daily ride quality. Engineered with vehicle-specific valving and internal pressure, these coilovers replace the soft factory dampers with high-performance monotube units designed for superior heat dissipation and consistent damping during spirited driving.

Each kit features lightweight, anodized aluminum damper bodies, locking collars, and spring perches for maximum corrosion resistance and durability. The threaded bodies allow for a wide range of height adjustability, offering a drop of 1 to 4 inches below factory height. With 32-way damping adjustment, users can fine-tune the rebound and compression from soft comfort to track-ready firmness using the integrated adjustment knobs.

• 32-way damping adjustment for precise ride control
• Monotube dampers for improved performance and heat management
• Anodized aluminum construction for weight reduction and corrosion protection
• Threaded body dampers offer 1" to 4" of height adjustment
• Vehicle-specific upper and lower mounts for a direct bolt-on installation
• Adjustable camber plates with pillowball upper mounts (where applicable)
• Fully compatible with future coilover-to-air conversion kits

Fits 2015-2024 Ford Mustang (S550/S650) Fastback models, including EcoBoost, GT, V6, Shelby GT350/GT350R/GT500, Mach 1, Bullitt, and Dark Horse.

The Air Lift Performance Coilover Kit (MPN: 79007) provides a precision-engineered static suspension solution for S550 and S650 Mustang owners looking for a significant drop without sacrificing ride quality. Designed to replace factory struts and shocks with high-performance monotube dampers, this kit ensures superior heat dissipation and consistent performance under load. With 32-way damping adjustment, you can fine-tune your suspension from soft street comfort to aggressive track-ready stiffness.

Constructed from lightweight, corrosion-resistant anodized aluminum, these coilovers utilize threaded bodies and adjustable lower mounts to provide a drop range of 1" to 4" below factory height. This design allows you to adjust your stance while maintaining full suspension travel. Additionally, this kit is designed for future flexibility; it is compatible with Air Lift Performance coilover-to-air conversion kits (available April 2, 2025), allowing you to upgrade to a full air suspension system without replacing your primary dampers.

• 32-way damping adjustment for precise ride control
• High-performance monotube dampers for improved heat dissipation
• Adjustable drop height from 1" to 4" below factory ride height
• Lightweight anodized aluminum damper bodies, top mounts, and locking collars
• Adjustable camber plates with pillowball upper mounts or non-adjustable rubber mounts (application-specific)
• Vehicle-specific valving and internal pressure for optimized ride characteristics
• Direct bolt-on installation with vehicle-specific upper and lower mounts
• Manufacturer Part Number: 79007
• 1-year limited warranty

Fits 2013-2024 Subaru BRZ, Toyota 86/GR86, and 2013-2016 Scion FR-S.

Air Lift Performance Coilovers (MPN: 79006) are engineered for drivers seeking a precise static drop without sacrificing daily ride quality. Built around high-performance monotube dampers for superior heat dissipation, these coilovers feature 32-way damping adjustment, allowing you to fine-tune the suspension for everything from aggressive track sessions to comfortable street cruising. The threaded bodies and adjustable lower mounts provide a significant drop of 1 to 4 inches below factory height.

Constructed with anodized aluminum damper bodies, top mounts, and locking collars, this kit is designed for lightweight durability and corrosion resistance. A unique feature of this system is its future-proofing; these coilovers can be converted to a full air suspension system using an Air Lift conversion kit (available separately). Each kit includes vehicle-specific mounts and valving to ensure a direct bolt-on installation and optimized internal pressure for the BRZ/86 chassis.

• 32-way damping adjustable monotube dampers
• Adjustable drop height from 1" to 4" below OE
• Anodized aluminum damper bodies and spring perches
• Adjustable camber plates with pillowball upper mounts (where applicable)
• Threaded body dampers for independent height and preload adjustment
• Air-conversion ready for easy transition to air suspension
• Manufacturer Part Number: 79006
• 1-Year Limited Warranty

Fits select 2015-2024 Audi A3, S3, RS3, TT and Volkswagen Golf, GTI, Golf R, Arteon, and Tiguan models.

The Air Lift Performance 79003 Coilover Kit delivers a high-performance static lowering solution for MQB-platform vehicles. Engineered for enthusiasts who prioritize both stance and handling, these coilovers utilize monotube dampers to provide superior heat dissipation and consistent performance. With 32-way damping adjustment, you can fine-tune your ride from street-comfortable to track-ready. The threaded damper bodies allow for height adjustments ranging from 1" to 4" below the factory ride height, giving you total control over your vehicle's center of gravity and aesthetic.

• 32-way damping adjustment for precise rebound and compression tuning
• High-quality monotube dampers for improved performance and thermal stability
• Anodized aluminum damper bodies, top mounts, and locking collars for lightweight durability and corrosion resistance
• Threaded body dampers and lower mounts offer 1" to 4" of adjustable drop height
• Vehicle-specific valving and internal pressure for optimized ride characteristics
• Adjustable camber plates with pillowball upper mounts (application specific)
• Direct bolt-on installation using vehicle-specific mounting points
• Future-proof design allows for conversion to air suspension via available kits
• Manufacturer Part Number: 79003
• Includes 1-year limited warranty

Fits 2015-2021 Subaru WRX and WRX STI (Base, Limited, Premium, Launch Edition, S209, Series.HyperBlue, and Type RA).

The Air Lift Performance 79001 Coilover Kit is engineered for enthusiasts demanding a precise, aggressive stance without sacrificing ride quality. These coilovers utilize high-quality monotube dampers to provide superior heat dissipation and consistent damping performance under load. With 32 levels of damping adjustment, you can fine-tune the suspension to suit daily commuting or spirited driving. The threaded body dampers and lower mounts offer a significant drop range of 1 to 4 inches below factory ride height.

Constructed with lightweight, anodized aluminum damper bodies, top mounts, locking collars, and spring perches, this kit is built for long-term corrosion resistance and durability. This system also offers a unique upgrade path; the dampers can be easily converted to a complete air suspension system using a coilover-to-air conversion kit (available April 2, 2025).

• 32-way damping adjustment for custom ride control
• High-quality monotube dampers for improved performance and thermal stability
• 1 to 4 inch adjustable drop range below factory height
• Lightweight anodized aluminum components for corrosion resistance
• Vehicle-specific valving and mounts for a direct bolt-on installation
• Adjustable camber plates with pillowball upper mounts (where applicable)
• Manufacturer Part Number: 79001
• 1-year Limited Warranty

Fits select 2017-2025 Tesla Model 3 and Model Y (Base, Long Range, Performance, Standard Range, and Standard Plus).

The Air Lift Performance 78701 Rear Kit provides the ability to drop your Tesla up to 145mm (5.7 inches) from stock height while significantly improving handling dynamics. This kit replaces the heavy factory coil springs with lightweight double-bellow air springs and performance-tuned monotube dampers, reducing unsprung mass for more responsive suspension travel. Each monotube damper features 30 levels of damping adjustment, allowing you to transition from a soft street ride to a firm performance setting with a simple click.

Designed for durability and precision, the threaded-body dampers include adjustable lower perches, which allow you to change ride height independently of air pressure. All major components are rig-tested to over one million cycles, and dampers are dyno-matched in pairs to ensure consistent performance across the axle. This kit is designed to maintain the use of your factory rear stabilizer bar for predictable cornering.

• Maximum drop: 145mm (5.7 in) from factory height
• 30 levels of damping adjustment for precise tuning
• High-quality monotube dampers for superior heat dissipation
• Threaded-body dampers with adjustable lower perches
• Progressive rate air springs for improved handling balance
• Tested for over 1 million cycles to ensure long-term reliability
• Dyno-tested and matched damper pairs
• Maintains factory rear stabilizer bar compatibility
• Manufacturer Part Number: 78701

Fits select 2016-2023 Chevrolet Camaro (LS, LT, LT1, SS, ZL1) and 2023 Honda Accord (EX, Hybrid, LX) models.

Achieve the perfect stance without compromising vehicle performance with the Air Lift Performance Rear Air Suspension Kit. This system is engineered to provide a maximum drop of 142mm (5.6 inches) from factory ride height, allowing you to "air out" for a show-ready look while maintaining the sharp, responsive handling expected of a modern performance chassis. Unlike fixed coilovers, this kit offers the versatility to adjust ride height at the touch of a button, eliminating common lowered-car issues like steep driveways or speed bumps.

The rear kit features robust double-bellow air springs paired with threaded-body dampers. With 30 levels of damping adjustability, you can fine-tune the suspension from a comfortable street setting to a firm, track-ready response. To ensure long-term reliability, key components have been torture-tested to 1 million cycles on an in-house hydraulic rig at temperatures ranging from -30°F to 150°F.

• Maximum Drop: 142mm (5.6in) from stock ride height
• Damping: 30-level adjustable threaded-body dampers
• Air Springs: High-quality double-bellow design
• Testing: Rigorously tested to 1 million cycles for durability
• Hardware: Includes all necessary installation components
• Manufacturer Part Number: 78665
• Warranty: One-year, unlimited-mileage manufacturer warranty

Fits select 2015-2024 Audi A3, S3, RS3, and TT, along with Volkswagen Golf, GTI, Golf R, Jetta, Tiguan, and Arteon models with independent rear suspension (IRS).

The Air Lift Performance Rear Kit is engineered to provide the aggressive stance of a slammed vehicle without the performance compromises found in traditional lowering springs or coilovers. Built for the MKVII/MQB platform, this kit utilizes double-bellow air springs and threaded-body dampers to achieve a maximum drop of 137mm from stock height. The monotube damper design ensures superior heat dissipation compared to twin-tube alternatives, providing consistent damping profiles during spirited driving.

Total customization is at your fingertips with 30 levels of damping adjustment, ranging from a soft street ride to race-ready stiffness. Because the lower perches are adjustable, you can dial in your preferred ride height independently of air pressure. To ensure long-term reliability in harsh environments, these components have been rig-tested for 1 million cycles at temperatures ranging from -30°F to 150°F.

• Up to 137mm (5.4") drop for maximum stance
• 30-level adjustable monotube dampers for precision tuning
• Double-bellow air springs for improved handling and load capacity
• Threaded lower perches allow ride height adjustment independent of pressure
• Reduces unsprung mass compared to heavy OEM coil suspensions
• All dampers are dyno-tested and matched in pairs
• Includes all necessary installation hardware and instructions
• Manufacturer Part Number: 78664

Fits select 2015-2024 Audi A3, RS3, S3, TT and Volkswagen Golf, GTI, Golf R, Arteon, and Golf SportWagen.

The Air Lift Performance Slam Series rear kit is engineered to provide the aggressive, slammed stance enthusiasts demand without compromising the ride quality required for a daily driver. This kit replaces factory rear coil springs with high-performance double-bellow air springs and twin-tube struts, capable of dropping your vehicle up to 137mm from stock height. By reducing unsprung mass compared to OEM suspension, this system improves handling response and allows for maximized wheel travel.

To ensure long-term reliability in harsh conditions, Air Lift Performance rig-tests these key suspension components to 1 million cycles on an in-house hydraulic test rig. The system is designed to operate consistently in temperatures ranging from -30°F to 150°F, providing peace of mind whether you are on the track or the street.

• Achieves up to 137mm drop from stock ride height
• Double-bellow air springs for progressive-rate performance and balance
• Twin-tube struts designed for efficient heat dissipation
• Fixed damping specifically tuned for the vehicle platform
• Rig-tested to 1,000,000 cycles for maximum durability
• Patented upper mounts designed to reduce noise and vibration
• Manufacturer Part Number: 78662
• Includes one-year, unlimited-mileage warranty

Fits select 2014-2024 Infiniti Q50, Q60, and Q70 models. The Air Lift Performance Front Kit (MPN 78566) is engineered to transform the handling and stance of your luxury sedan or coupe, providing a maximum drop of 85mm from factory ride height for a low, aggressive profile without sacrificing drivability.

This kit replaces factory front components with high-performance monotube, threaded-body shocks paired with double-bellow air springs. These dampers feature 30 levels of adjustability, allowing you to quickly transition from a soft, comfortable street ride to a stiff, performance-oriented setup for spirited driving. The dampers are secured with rubber-isolated upper and lower mounts specifically designed to minimize noise, vibration, and harshness (NVH) while keeping the vehicle planted.

• Maximum Drop: 85mm (3.35 inches) below stock height.
• Damping Control: 30 levels of adjustment for precise ride tuning.
• Strut Design: Monotube, threaded-body shocks with double-bellow air springs.
• Durability: Torture-tested to 1 million cycles at temperatures ranging from -30°F to 150°F.
• Mounting: Rubber-isolated mounts for quiet, refined operation.
• Manufacturer Part Number: 78566

Includes front air struts and required hardware for installation. This kit is backed by Air Lift Performance’s one-year, unlimited-mileage warranty.