Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
483 products
483 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$80.00
Optional flip up license plate kit for Summit Bumper.
Warranty- Flip Up License Plate Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Toyota | Tacoma | Limited |
| 2016 | Toyota | Tacoma | SR |
| 2016 | Toyota | Tacoma | SR5 |
| 2016 | Toyota | Tacoma | TRD Off-Road |
| 2016 | Toyota | Tacoma | TRD Sport |
$139.95
ARB offers a wide array of bumper accessories such as winch installation kits, driving lights, looms, license plate kits, and hardware to complement our range of different bumpers, from the sleek Deluxe and Sahara styles, to the more functional Commercial bumper.
Warranty- For Bumpers with Recessed Roller Fairlead Mounts
- Winch Install Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2015 | Jeep | Grand Cherokee | Laredo |
| 2011-2015 | Jeep | Grand Cherokee | Limited |
| 2011-2015 | Jeep | Grand Cherokee | Overland |
| 2012 | Jeep | Grand Cherokee | Overland Summit |
| 2014-2015 | Jeep | Grand Cherokee | SRT |
| 2012-2013 | Jeep | Grand Cherokee | SRT8 |
| 2014-2015 | Jeep | Grand Cherokee | Summit |
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2007-2015 | Jeep | Wrangler | Rubicon |
| 2007-2015 | Jeep | Wrangler | Sahara |
| 2010-2015 | Jeep | Wrangler | Sport |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2007-2015 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2015 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2015 | Jeep | Wrangler | Unlimited Sport |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
$121.95
ARB offers a wide array of bumper accessories such as winch installation kits, driving lights, looms, license plate kits, and hardware to complement our range of different bumpers, from the sleek Deluxe and Sahara styles, to the more functional Commercial bumper.
Warranty- 51 W 9006/H4B4 Halogen Fog Lights
- Fog Light Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2015 | Ford | F-250 Super Duty | King Ranch |
| 2011-2015 | Ford | F-250 Super Duty | Lariat |
| 2013-2015 | Ford | F-250 Super Duty | Platinum |
| 2011-2015 | Ford | F-250 Super Duty | XL |
| 2011-2015 | Ford | F-250 Super Duty | XLT |
| 2011-2015 | Ford | F-350 Super Duty | King Ranch |
| 2011-2015 | Ford | F-350 Super Duty | Lariat |
| 2013-2015 | Ford | F-350 Super Duty | Platinum |
| 2011-2015 | Ford | F-350 Super Duty | XL |
| 2011-2015 | Ford | F-350 Super Duty | XLT |
$86.95
With the introduction of the new ARB Intensity LED driving lights and their use of Deutsch waterproof connectors, ARB has developed a new loom based on the 3500440 Auxiliary Lighting Loom. The new loom features the same mouse style switch and harness, with Deutsch DT-06 connectors in place of the bullet type connectors used for ARB fog lights and IPF lights.
Warranty- 105 Degrees Celsius Automotive Grade Wiring
- Heavy Duty Relay w/Rubber Moister Cover
- Rated For 1 Pair Of 130 Watt Lights
- Pre Assembled Plug And Play Design
- Push Button Surface Mount switch
- Water Proof DT-06 Connectors
- Fuse Protected Mouse Style
$123.00
Introducing the ARB Intensity V2 that incorporates the latest optic and LED technology with subtle styling enhancements? the ARB Intensity Light has been reborn. The Intensity V2 uses the same optimal chassis design as the previous generation, incorporating the latest in LED technology? OSRAM GIANTS. The Intensity spot-light configuration uses advanced optics via the latest Hyperspot(TM) technology. The Intensity flood-light configuration has been updated to spread the light further down the road. Pairing the spot and flood combination will give long-range visibility and shoulder-to-shoulder visibility. Hyperspot(TM) is a refined optic used to focus and intensify light output. It also drives the LED OSRAM GIANTS down the road while maintaining clarity and controlling the beam pattern. OSRAM GIANTS large LED chips provides a considerable amount of light output. One of the advantages of the OSRAM GIANTS is the amount of power that can be driven into the LED. Power has been pushed to 165W per light for the AR32s and 105W for the AR21s. This produces 20,000 lumens of raw-light output for the AR32s and 13,170 lumens for the AR21s. The new V2 driving lights power draw requires a new loom, so ARB designed a harness with high-current wiring and components capable of to handling up to 40 amps. Intelligent thermal management in the LEDs and the PCB board are a critical design component of Intensity lights. To maximize cooling, the die-cast aluminum body acts as a heat sink and allows the dissipation of heat from the LEDs quickly. Producing clean, crisp light with refined color temp on the LED helps reduce eye strain and fatigue on long distance drives while reaching substantial distances down the road. Continuing a tradition of never compromising, superior grade electronics and LEDs, first-class active-thermal management,and optimized lens and optic configurations, the ARB Intensity V2 driving lights continue to set the industry standard in vehicle lighting.
Warranty- Mil810-Stdg Vibration Certified (Exceeds Military Spec)
- Hard-Coated Durable-Polycarbonate Protective Cover
- Hyperspot Led Technology For Spot Configurations
- Gore-Tex Breather With Pressure Tested Seals
- Virtually Indestructible Polycarbonate Lens
- 32 Or 21 High-Powered Osram Square Leds
- Reverse-Polarity Voltage Protection
- High-Pressure Cast-Aluminum Body
- Dust And Waterproof To IP68
- Requires ARB Wiring Loom
- Part Number3500480
- 50000Hr Lifespan
- 2-Year Warranty
$29.95
Custom ARB Mud Flaps are required to complete the installation of the ARB Rear Bumper as the OE Mud Flaps cannot be reused after removal of the OE Rear Bumper.
Warranty- Mud Flap
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2009 | Hummer | H3 | Adventure |
| 2008-2009 | Hummer | H3 | Alpha |
| 2006-2009 | Hummer | H3 | Base |
| 2009 | Hummer | H3 | Championship Series |
| 2008-2009 | Hummer | H3 | Luxury |
| 2007-2009 | Hummer | H3 | X |
$102.00
$79.95
ARB offers a wide array of bumper accessories such as winch installation kits, driving lights, looms, license plate kits, and hardware to complement our range of different bumpers, from the sleek Deluxe and Sahara styles, to the more functional Commercial bumper.
WarrantyInstallation Instructions
- Spacer
$1,849.95
The ARB Summit Bumper is designed as a full bumper replacement with 4WD use in mind. Compatible with winches up to 10,000lb, it provides needed off-road protection, twin jack points, and rated recovery points, while accommodating adaptive cruise control and parking sensors. The width of the Summit Bumper blends seamlessly into the vehicle design, complementing either wide or narrow fender flares.
Installation InstructionsWarranty
- Wing design allows for a 37 tire to be fitted (suitable suspension lift and rim off set required)
- Twin jack points located in lower pan to suit ARB Jack and mechanical jacks
- Twin forged bar-mounted ARB Rated 8T recovery points
- Durable, steel construction for maximum protection
- Finished in Integrit black textured powder coat
- Compatible with winches up to 10,000lb
- Suits the use of OE LED fog lights
- Provision for Driving Lights
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,154.00
The ARB Summit Bumper is designed as a full bumper replacement with 4WD use in mind. Compatible with winches up to 10,000lb, it provides needed off-road protection, twin jack points, and rated recovery points, while accommodating adaptive cruise control and parking sensors. The width of the Summit Bumper blends seamlessly into the vehicle design, complementing either wide or narrow fender flares.
WarrantyInstallation Instructions
- Wing design allows for a 37 tire to be fitted (suitable suspension lift and rim off set required)
- Twin jack points located in lower pan to suit ARB Jack and mechanical jacks
- Twin forged bar-mounted ARB Rated 8T recovery points
- Durable, steel construction for maximum protection
- Finished in Integrit black textured powder coat
- Compatible with winches up to 10,000lb
- Suits The Use Of OE LED Fog Lights
- Provision for Driving Lights
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2021-2024 | Ford | Bronco | Wildtrak |
$2,045.95
The Summit Bumper continues the ARB tradition of pioneering innovation and our relentless pursuit on quality. Summit is a modern interpretation of the renowned ARB Deluxe Bumper, styled to complement modern dual cab and SUV vehicles through a fresh, contemporary design language. Building upon our proven air bag compatible bumper mounting architecture, the Summit Bumper incorporates unique design features such as a 30mm edge radius on the wings and center pan, wider press formed cover straps, 60.3mm top tubing, two-piece polyethylene buffers and redesigned fog light surrounds. This results in the most visually impressive frontal protection system on the market.
WarrantyWarranty
- Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Multi-fold, tapered wings for optimal strength, approach angle
- Durable steel construction for maximum protection
- Twin jack points located beneath each buffer
- Air bag compatible chassis mounting system
- Provision for Driving Lights
- Durable, two-piece buffers
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Chevrolet | Colorado | ZR2 |
$1,320.49
The ARB Summit Bumper features the latest styling from ARB including press form cover straps, larger ARB fog light and surround, three-piece split pan grill with access doors for winch clutch operation and a recessed winch control box mount for a sleek, integrated appearance. Vital for rural and remote area travel, ARB Bumpers will provide substantially improved protection for vulnerable mechanical components against animal strikes while providing a solid base for mounting other accessories like driving lights, winches and CB antennas. ARB Bumpers are superbly engineered and manufactured to not only maintain maximum functionality, but also to ensure they complement the look of the vehicle. ARB manufactures a number of different bumpers from the sleek Deluxe and Sahara styles, to the more functional Commercial bumper.
Installation InstructionsWarranty
- Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Multi-fold, tapered wings for optimal strength, approach angle
- Durable Steel Construction For Maximum Protection
- Finished In Integrit Textured Black Powder Coat
- Twin jack points located beneath each buffer
- Air bag compatible chassis mounting system
- Provision for Driving Lights
- Durable, two-piece buffers
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Chevrolet | Colorado | ZR2 |
$1,495.95
With the release of the new Jeep Wrangler JL, the engineers at ARB were excited to have the opportunity to develop a new style bumper which emanates ARBs heritage, and pulls inspiration from the popular classic ARB Wrangler TJ Bumper. Ruggedness is ensured by the new single-piece, press-formed center pan perfectly complemented by a bash plate along the base and a low-slung forward-facing 3 inch main hoop. The new Bondi Deluxe Winch Bumper is recovery ready with two highly-visible red chassismounted, rated recovery points and centrally-located recovery jacking points. An integrated winch cradle can be separated from the bumper for an easier install, and the bumper comes with mounts for various styles of driving lights or antennas. Press-formed apertures in the outer wings provide fog light surrounds suitable for retention of the OE fog lights. The Bondi Deluxe Winch Bumper is pretreated with a zinc shield for superior resistance to corrosion, and is finished with an ultra-low sheen, matte Integrit(TM) finish.To complete the look, the bash plate underpanel is powder coated in silver offering an appealing contrast to the black bumper.
WarrantyInstallation Instructions
- Each Bumper Comes With Two Reinforced Recovery Jacking Points
- Two Antenna Mounts Are Welded To The Center Cross Tube
- Driving Light Mounts Are Welded To The 3 In Cross Tube
- Roller Fairlead Or Hawse Fairlead Aperture
- Provision for plastic bumper OE Fog Lights
- Two 8T-Rated Recovery Points Are Provided
- Features A Separate Winch-Mount Cradle
- Fits JL Wrangler Rubicon models only
- Fog Light Apertures In Wings
- Top-Winch Access Opening
- Recovery Point Openings
- Bash Plate Underpanel
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021 | Jeep | Wrangler | Freedom |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2020-2022 | Jeep | Wrangler | Sport |
| 2020-2022 | Jeep | Wrangler | Sport S |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2020-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2020-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2020-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2022 | Jeep | Wrangler | Willys |
| 2021-2022 | Jeep | Wrangler | Willys Sport |
$895.95
Inspired by the classic ARB Wrangler JK Stubby Bumper, the newly developed ARB Wrangler JL Stubby Bumper is designed for the off-roader who is in need of a winch mounting platform while maintaining maximum clearance for larger diameter tires. Generally vehicles that run larger than 37 inch tires may rub the wings of a traditional style ARB Deluxe Bumper. The Stubby Bumper eliminates this issue on the Jeep Wrangler JL as it is only a little wider than the vehicles chassis. For recovery situations each wing section features jacking points suitable for an ARB JACK or mechanical recovery jack. Antenna tabs on main tube can be used for fitment of communication antennas or driving lights to the bumper. Central on each outer wing section are 0.8 thick 350 grade recovery points which tie through the wings and into the chassis mounts directly giving the strongest possible recovery point. The winch platform will allow the mounting of most traditional low mount style Warn winches and narrow mount pattern competition type winches. A bracket is provided for those who wish to run their control box in the center of the bumper. Two front ?flip up style license plate mounts are provided. One to suit roller fairleads and one for the hawse type fairlead. These allow the number plate to be located over the fairlead and flipped up out of the way when the winch is in use.
WarrantyInstallation Instructions
- Provision To Accommodate A Range Of IPF And ARB Driving Lights
- Manufactured From 4 mm Laser Cut And Folded Steel Sheet
- Equally Suited To Winch And Non Winch Applications
- Durable Steel Construction For Maximum Protection
- All Hardware Zinc Plated For Corrosion Resistance
- All Exterior Surfaces Are CMT Pulse Welded
- 0.8 in. 350 Grade Steel Recovery Points
- Specific Design To Complement Vehicle
- ERW Center Frame Tube
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2023-2024 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$1,545.95
Inspired by the classic ARB Wrangler JK Deluxe bumper is the newly developed Wrangler JL Deluxe bumper designed to provide maximum full width protection while remaining practical and stylish. Outer wings have been designed specifically to suit both Rubicon and non-Rubicon factory flares and are able to clear up to a 37 tire. Included with the bumper are brackets for retention of both factory halogen or LED fog lights to help maintain a clean OE look. When the need for recovery is arises, the JL Deluxe bumper is ready and full of features. Incorporated is a winch mount platform that will allow the mounting of most low mount style Warn winches up to 10,000 lb. Welded 0.8 recovery points included for snatch or winch double line recovery pulls. Jack points are also included in the center pan section and are designed to safely lift the JL using the ARB JACK or a mechanical recovery jack. Antenna tabs on the main tube can be used for fitment of communication antennas or additional driving lights. JL Deluxe bumpers are pre-treated with a zinc shield for superior corrosion resistance. The bumper is then powder coated in an Integrit(TM) textured finish which is designed for maximum aesthetic appeal in an ultra-low sheen matte finish. Integrit textured powder coat is uniquely formulated to replicate the appearance of automotive grade black plastic on steel or alloy fabricated products. Visually the finish is similar to the OE flares on the JL.
WarrantyInstallation Instructions
- Provision To Accommodate A Range Of IPF And ARB Driving Lights
- Superbly Engineered/Airbag Compatible Mounting System
- Equally Suited For Winch And Non Winch Applications
- Durable Steel Construction For Maximum Protection
- Wing Design Allows For A 37 In. Tire To Be Fitted
- Tow Points Allow For Excellent Approach Angle
- Wings Designed To Suit Oe Flares Of Models
- Specific Design To Complement Vehicle
- Separate Winch Cover Panel Available
- Durable Urethane Buffers
- Retains OE Fog Lights
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2023-2024 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$845.95
The Stubby Bumper is for the off-roader who requires a winch, while maintaining maximum clearance for larger diameter tires. Featuring a 3” main tube and upper wing section with provisions for jacking points. Brackets are provided for fitment of driving lights to the bumper, and .79” thick 350 grade recovery points tie in through the wings and into the chassis mounting directly. Compatible with most traditional low-mount style winches and narrow-mount pattern competition type winches.
- Manufactured from 4mm laser cut and folded steel sheets
- Antenna tabs for fitment of antennas or driving lights
- Durable steel construction for maximum protection
- All hardware zinc plated for corrosion resistance
- Twin jack points
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$2,195.95
Designed to fit the 2014-2016 Jeep Grand Cherokee 4x4 models, the ARB Deluxe Bar has been engineered and developed from the ground up. With various engine and model variations within the vehicle model line-up, ARBs engineers scanned different configurations of models within the WK2 Grand Cherokee range to ensure the bumpers fitment to all models 2014 to 2016. The test program for the WK2 bar development included articulation tests to ensure proper bar clearance, rough surface driving, winch load testing, Hi-Lift jack point testing and both low speed suburban and freeway driving. For winch fitment, the 3540050 Winch Install kit is required. This includes a folding license plate bracket, longer power cables and all fasteners required to fit a Warn winch to the bar. Sales staff and customers should be aware that the bar should not be fitted with a winch without this kit as the folding bracket allows the license plate to be positioned in a way that does not affect air flow through the bar.
Installation InstructionsWarranty
Installation Instructions
Warranty
- Additional fitting kit part 3550110 required when fitting bumper to vehicle equipped with radar
- Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
- Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
- Winch install kit part 3540050 required when fitting winch
- Multi Fold Upswept And Tapered Wing Design
- Extensive Under Protection Panels
- Twin Hi-Lift Jacking Points
- Durable Steel Construction
- Black Powder Coat
- Split Pan Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Grand Cherokee | 75th Anniversary |
| 2014-2016 | Jeep | Grand Cherokee | Laredo |
| 2014-2016 | Jeep | Grand Cherokee | Limited |
| 2014-2016 | Jeep | Grand Cherokee | Summit |
$1,197.04
Designed to fit the 2014-2016 Jeep Grand Cherokee 4x4 models, the ARB Deluxe Bar has been engineered and developed from the ground up. With various engine and model variations within the vehicle model line-up, ARBs engineers scanned different configurations of models within the WK2 Grand Cherokee range to ensure the bumpers fitment to all models 2014 to 2016. The test program for the WK2 bar development included articulation tests to ensure proper bar clearance, rough surface driving, winch load testing, Hi-Lift jack point testing and both low speed suburban and freeway driving. For winch fitment, the 3540050 Winch Install kit is required. This includes a folding license plate bracket, longer power cables and all fasteners required to fit a Warn winch to the bar. Sales staff and customers should be aware that the bar should not be fitted with a winch without this kit as the folding bracket allows the license plate to be positioned in a way that does not affect air flow through the bar.
WarrantyInstallation Instructions
- Additional fitting kit part 3550110 required when fitting bumper to vehicle equipped with radar
- Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
- Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
- Winch install kit part 3540050 required when fitting winch
- Multi Fold Upswept And Tapered Wing Design
- Hard Wearing Satin Black Powder Coat
- Extensive Under Protection Panels
- Twin Hi-Lift Jacking Points
- Durable Steel Construction
- Black Powder Coat
- Split Pan Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Grand Cherokee | 75th Anniversary |
| 2014-2016 | Jeep | Grand Cherokee | Laredo |
| 2014-2016 | Jeep | Grand Cherokee | Limited |
| 2014-2016 | Jeep | Grand Cherokee | Overland |
| 2014-2016 | Jeep | Grand Cherokee | SRT |
| 2014-2016 | Jeep | Grand Cherokee | Summit |
$795.95
Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARB's Deluxe Bumper selection is the most extensive in the industry. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
WarrantyInstallation Instructions
- Suits most electic winches to 10,000 lb capacity
- Provisions for fog lights and driving lights
- 250 Heavy Grade Wall Tubing
- Cold Rolled Sheet Steel
- Integrated Tow Points
- Winch Mount Bumper
- Winch compatible
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006 | Jeep | Wrangler | 65th Anniversary Edition |
| 1987,1989-1993 | Jeep | Wrangler | Base |
| 1989-1992 | Jeep | Wrangler | Islander |
| 1989-1990 | Jeep | Wrangler | Laredo |
| 1991-1994 | Jeep | Wrangler | Renegade |
| 1995 | Jeep | Wrangler | Rio Grande |
| 2003-2006 | Jeep | Wrangler | Rubicon |
| 1991-1994 | Jeep | Wrangler | S |
| 1990-1995,1997-2004 | Jeep | Wrangler | Sahara |
| 1994-1995,1997-2006 | Jeep | Wrangler | SE |
| 1987,1997-2006 | Jeep | Wrangler | Sport |
| 2004-2006 | Jeep | Wrangler | Unlimited |
| 2005-2006 | Jeep | Wrangler | Unlimited Rubicon |
| 2002-2006 | Jeep | Wrangler | X |
$2,295.95
The ARB Summit Bumper for the 2019 Ranger continues the tradition of pioneering innovation with a relentless pursuit of quality. Features include press form cover straps, larger ARB fog lights, surround, and a three-piece split pan grille with access doors for winch clutch operation. It also includes a recessed winch control box mount for a sleek, integrated appearance. The Ranger Summit Bumper is finished in ARBs textured black Integrit , offering class-leading protection and unparalleled corrosion resistance with an ultra-low sheen matte finish.
Installation InstructionsWarranty
- Includes bumper, mount kit, winch install kit and fog light kit
- Multi-fold, tapered wings for optimal strength, approach angle
- Works with front parking sensors and adaptive cruise control
- Durable steel construction for maximum protection
- Twin jack points located beneath each buffer
- Air bag compatible chassis mounting system
- Provision for Driving Lights
- Durable, two-piece buffers
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2023 | Ford | Ranger | Lariat |
| 2019-2023 | Ford | Ranger | XL |
| 2019-2023 | Ford | Ranger | XLT |
$1,566.72
The ARB Summit Bumper for the 2019 Ranger continues the tradition of pioneering innovation with a relentless pursuit of quality. Features include press form cover straps, larger ARB fog lights, surround, and a three-piece split pan grille with access doors for winch clutch operation. It also includes a recessed winch control box mount for a sleek, integrated appearance. The Ranger Summit Bumper is finished in ARBs textured black Integrit(TM) , offering class-leading protection and unparalleled corrosion resistance with an ultra-low sheen matte finish.
Installation InstructionsWarranty
Installation Instructions
- Includes bumper, mount kit, winch install kit and fog light kit
- Multi-fold, tapered wings for optimal strength, approach angle
- Works with front parking sensors and adaptive cruise control
- Durable steel construction for maximum protection
- Twin jack points located beneath each buffer
- Provision To Accommodate ARB Intensity LEDs
- Air bag compatible chassis mounting system
- Provision for Driving Lights
- Durable, two-piece buffers
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2023 | Ford | Ranger | Lariat |
| 2019-2023 | Ford | Ranger | XL |
| 2019-2023 | Ford | Ranger | XLT |
$1,595.95
Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
WarrantyInstallation Instructions
Warranty
Installation Instructions
- Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
- Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
- Multi Fold Upswept And Tapered Wing Design
- Extensive Under Protection Panels
- Provision for Driving Lights
- Twin Hi-Lift Jacking Points
- Durable Steel Construction
- Durable Urethane Buffers
- Black Powder Coat
- Split Pan Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2017 | Nissan | Frontier | Desert Runner |
| 2009-2010 | Nissan | Frontier | LE |
| 2009-2017 | Nissan | Frontier | PRO-4X |
| 2011-2017 | Nissan | Frontier | S |
| 2009-2010 | Nissan | Frontier | SE |
| 2011-2017 | Nissan | Frontier | SL |
| 2011-2017 | Nissan | Frontier | SV |
| 2009-2010 | Nissan | Frontier | XE |
$1,057.94
Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
WarrantyInstallation Instructions
- Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
- Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
- Multi Fold Upswept And Tapered Wing Design
- Extensive Under Protection Panels
- Provision for Driving Lights
- Twin Hi-Lift Jacking Points
- 250 Heavy Grade Wall Tubing
- Durable Steel Construction
- Durable Urethane Buffers
- Black Powder Coat
- Split Pan Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2017 | Nissan | Frontier | Desert Runner |
| 2009-2010 | Nissan | Frontier | LE |
| 2009-2017 | Nissan | Frontier | PRO-4X |
| 2011-2017 | Nissan | Frontier | S |
| 2009-2010 | Nissan | Frontier | SE |
| 2011-2017 | Nissan | Frontier | SL |
| 2011-2017 | Nissan | Frontier | SV |
| 2009-2010 | Nissan | Frontier | XE |
$981.50
Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
WarrantyInstallation Instructions
- Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
- Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
- Multi Fold Upswept And Tapered Wing Design
- Extensive Under Protection Panels
- Provision for Driving Lights
- Twin Hi-Lift Jacking Points
- 250 Heavy Grade Wall Tubing
- Durable Steel Construction
- Durable Urethane Buffers
- Black Powder Coat
- Split Pan Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2010 | Nissan | Xterra | Off-Road |
| 2011-2015 | Nissan | Xterra | PRO-4X |
| 2005-2015 | Nissan | Xterra | S |
| 2005-2010 | Nissan | Xterra | SE |
| 2006-2015 | Nissan | Xterra | X |
$853.71
Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
WarrantyInstallation Instructions
- Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
- Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
- Multi Fold Upswept And Tapered Wing Design
- Extensive Under Protection Panels
- Provision for Driving Lights
- 250 Heavy Grade Wall Tubing
- Twin Hi-Lift Jacking Points
- Durable Steel Construction
- Durable Urethane Buffers
- Black Powder Coat
- Split Pan Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2008 | Nissan | Frontier | LE |
| 2005-2008 | Nissan | Frontier | Nismo Off-Road |
| 2005-2008 | Nissan | Frontier | SE |
| 2005-2008 | Nissan | Frontier | XE |
| 2005-2007 | Nissan | Pathfinder | LE |
| 2006-2007 | Nissan | Pathfinder | S |
| 2005-2007 | Nissan | Pathfinder | SE |
| 2005-2007 | Nissan | Pathfinder | SE Off-Road |
| 2005 | Nissan | Pathfinder | XE |
$1,395.95
Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
Installation InstructionsWarranty
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Multi Fold Upswept And Tapered Wing Design
- Extensive Under Protection Panels
- Provision for driving lights
- 250 Heavy Grade Wall Tubing
- Twin Hi-Lift Jacking Points
- Durable Steel Construction
- Durable Urethane Buffers
- Black Powder Coat
- Split Pan Design
- Winch compatible
- OEM Tow Points
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1998,2002-2003 | Nissan | Frontier | Base |
| 2004 | Nissan | Frontier | LE |
| 2001-2004 | Nissan | Frontier | SC |
| 1998-2003 | Nissan | Frontier | SE |
| 2002-2004 | Nissan | Frontier | SVE |
| 1998-2004 | Nissan | Frontier | XE |
| 2000-2004 | Nissan | Xterra | SE |
| 2000-2004 | Nissan | Xterra | XE |
$2,395.95
Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
Warranty- Fits F450 and F550 models with the Dana 60 front ends only
- Multi Fold Upswept And Tapered Wing Design
- Extensive Under Protection Panels
- Provision For IPF Driving Lights
- Provisions For ARB Fog Lights
- 250 Heavy Grade Wall Tubing
- Twin Hi-Lift Jacking Points
- Durable Steel Construction
- Durable Urethane Buffers
- Black Powder Coat
- Split Pan Design
- OEM Tow Points
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2004 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2004 | Ford | F-250 Super Duty | King Ranch |
| 1999-2004 | Ford | F-250 Super Duty | Lariat |
| 1999-2004 | Ford | F-250 Super Duty | XL |
| 1999-2004 | Ford | F-250 Super Duty | XLT |
| 2004 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2003-2004 | Ford | F-350 Super Duty | King Ranch |
| 1999-2004 | Ford | F-350 Super Duty | Lariat |
| 1999-2004 | Ford | F-350 Super Duty | XL |
| 1999-2004 | Ford | F-350 Super Duty | XLT |
$1,550.06
Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
WarrantyInstallation Instructions
Warranty
Installation Instructions
- Surrounds and indicators from 1993-96 model year vehicles will be required when fitting bumper
- 1997 North American spec (NAS ) Defender 90 headlamp surround assemblies do not clear bumper
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Winch install kit part no. 3532070 required when fitting a winch
- Does NOT suit models fitted with optional protruding grille
- Multi Fold Upswept And Tapered Wing Design
- Extensive Under Protection Panels
- Twin Hi-Lift Jacking Points
- Durable Steel Construction
- Durable Urethane Buffers
- Black Powder Coat
- Split Pan Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1993 | Land Rover | Defender 110 | Base |
| 1994-1995,1997 | Land Rover | Defender 90 | Base |
| 1997 | Land Rover | Defender 90 | LE |
$1,283.62
Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
WarrantyInstallation Instructions
- Surrounds and indicators from 1993-96 model year vehicles will be required when fitting bumper
- 1997 North American spec (NAS ) Defender 90 headlamp surround assemblies do not clear bumper
- Compatible with most electic low mount winches, up to 10,000 lb capacity
- Winch install kit part no. 3532070 required when fitting a winch
- Does NOT suit models fitted with optional protruding grille
- Multi Fold Upswept And Tapered Wing Design
- Extensive Under Protection Panels
- Twin Hi-Lift Jacking Points
- 250 Heavy Grade Wall Tubing
- Durable Steel Construction
- Durable Urethane Buffers
- Black Powder Coat
- Split Pan Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1993 | Land Rover | Defender 110 | Base |
| 1994-1995,1997 | Land Rover | Defender 90 | Base |
| 1997 | Land Rover | Defender 90 | LE |
$885.95
Bridging functionality and style, ARB’s Zenith Bumper turns heads whilst providing your vehicle with ARB’s industry-leading protection and performance. The Zenith is constructed from laser-cut and formed durable steel, finished with ecoat, meta prep and satin black powder coat for ultimate corrosion resistance. Extensive design work has been undertaken to maximize strength and aesthetics in this new low profile design bumper. Engineers have integrated twin 17,637lbs (8t) rated recovery points into the Zenith bar making it an complete solution. The forged recovery points are shaped and formed to protect soft shackles and prevent point load on steel bow shackles, solving an common issue. The Zenith boasts integrated front bash plates which, along with the wings and pans of the bumper to provide protection to vulnerable vehicle components. Functionally was top of mind when designing the Zenith, ensuring powertrain performance is not affected with the design ensuring maximum air flow to critical cooling systems. OEM fog lamps are utilized via dual apertures and the radar has been relocated, where required. Finally, the integrated winch cradle is compatible with most low mount winches up to 12,000lbs.
WarrantyInstallation Instructions
- Made from durable laser cut and formed 3mm steel for maximum strength-to-weight ratio, the Zenith is meta prep primed, and powder coated in an satin finish for corrosion resistance
- Twin recessed recovery jack points on the front of the bumper to ensure safe and secure locations to perform an recovery. Compatible with ARB Jack and traditional farm jacks.
- Two 8T rated recovery points, engineered and integrated into the bumper, rated to 17,637lbs (8T) and finished in red powder coat
- Bash plates included, with one heavy forged center piece and additional side bash plates for added protection on rugged terrain
- A removable center grille allows for the install of up to seven 4in pod lights or lightbars up to 30in
- Built-in winch cradle, the Zenith bumper is compatible with most low mount winches up to 12,000lbs
- Compatible with factory Radar ADAS, Parking Sensors, and Airbag systems
- Compatible with OE fog lights (on applicable models)
- Slimline design profile, with minimal front overhang
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Toyota | Tacoma | Limited |
| 2025 | Toyota | Tacoma | SR |
| 2024-2025 | Toyota | Tacoma | SR5 |
| 2024-2025 | Toyota | Tacoma | Trailhunter |
| 2024-2025 | Toyota | Tacoma | TRD Off-Road |
| 2024-2025 | Toyota | Tacoma | TRD Pro |
| 2024-2025 | Toyota | Tacoma | TRD Sport |
Showing 330/483
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.