Fits select 1988-1997 Honda CRX and Civic del Sol models with SOHC engines.

The ARP 108-2201 Pressure Plate Bolt Kit provides the essential clamping force required to keep your clutch assembly secure under high-load conditions. Standard factory fasteners are prone to stretching and fatigue; these high-strength replacements ensure the pressure plate remains perfectly mated to the flywheel, preventing vibration and ensuring consistent clutch engagement and release. Precision machined for a direct fit, this kit is an essential upgrade for any Honda SOHC drivetrain maintenance or performance build.

• Specifically engineered for Honda SOHC pressure plate applications
• Replaces standard OEM fasteners for increased reliability and strength
• Set includes 6 high-strength fasteners
• Manufacturer Part Number: 108-2201

Fits 1995-2006 Mitsubishi Eclipse and Lancer Evolution, and 1995-1998 Eagle Talon TSi (4G63).

Ensure the integrity of your engine's rotating assembly with the ARP 8mm Rod Bolt Kit. Factory rod bolts are a known weak point in high-performance 4G63 builds; these ARP fasteners are engineered to withstand the increased inertial loads and cylinder pressures associated with high-RPM operation and forced induction. Precision-machined to exacting tolerances, they provide the superior clamping force and tensile strength required to prevent rod bearing failure and cap walk.

• Designed specifically for 4G63 engines utilizing 8mm rod bolts
• Significantly increases rotating assembly reliability under high stress
• Precision-ground for consistent clamping force and alignment
• Direct replacement for factory rod hardware
• Manufacturer Part Number: 107-6002

This ARP 107-6001 Connecting Rod Bolt Kit fits select 1990-1994 Eagle Talon TSi, Mitsubishi Eclipse GS and GSX, and Plymouth Laser RS models.

Connecting rod bolts are the most critical fasteners in your engine, holding the rotating assembly together under intense reciprocating loads. Replacing factory hardware with ARP fasteners provides the tensile strength and fatigue resistance necessary for high-RPM reliability and performance builds. Each bolt is precision-machined to ensure consistent clamping force across the rod cap, preventing bearing failure and rod breakage.

• Manufacturer Part Number: 107-6001
• Direct replacement for OE connecting rod bolts
• High-tensile strength construction for performance applications
• Engineered for precise fitment and superior durability
• Compatible with 1990-1994 Eagle Talon TSi
• Compatible with 1990-1994 Mitsubishi Eclipse GS / GSX
• Compatible with 1990-1994 Plymouth Laser RS

Fits select 1993-2006 Mitsubishi Eclipse and Lancer Evolution, Eagle Talon TSi, and Plymouth Laser RS (4G63).

When building a high-performance 4G63 engine for an automatic transmission application, standard OE hardware can become a weak link. The ARP Flexplate Bolt Kit (MPN: 107-2902) provides the necessary clamping force and shear strength required for modified drivetrains. These fasteners are forged from a premium aerospace alloy and heat-treated prior to thread rolling to ensure superior fatigue life and dimensional accuracy.

• Replaces factory flexplate hardware with high-strength ARP fasteners
• Forged from premium aerospace alloy for maximum durability
• Heat-treated and precision-rolled threads for consistent torque loading
• Engineered specifically for 4G63-powered platforms
• Manufacturer Part Number: 107-2902

Fits 1990-1992 Mitsubishi Eclipse, Galant VR-4, Eagle Talon, and Plymouth Laser models equipped with the 4G63 engine.

Ensure your drivetrain is secured with the ARP 107-2802 Flywheel Bolt Kit. Standard OE fasteners are prone to stretching or failure under the increased torque and RPM demands of high-performance driving. These ARP bolts are engineered to exceed factory specifications, providing the clamping force and fatigue resistance necessary to prevent flywheel loosening or catastrophic shear. Each bolt is precision-machined for exact tolerances, making them an essential upgrade for any clutch service or engine build on pre-1992 DSM platforms.

• Manufacturer Part Number: 107-2802
• Application-specific design for 1990-1992 4G63 6-bolt engines
• Replaces worn or stretched factory flywheel mounting hardware
• High-tensile strength for improved drivetrain reliability
• Precision-ground for perfect alignment and fitment

Fits 1993-1999 Eagle Talon, Mitsubishi Eclipse, and Plymouth Laser with 7-bolt 4G63 engines (non-EVO DSM applications).

Secure your drivetrain with the ARP 107-2801 flywheel bolt kit, engineered specifically for high-performance 7-bolt 4G63 DSM engines. In high-RPM and high-torque applications, the flywheel bolts are subjected to extreme shearing forces. These fasteners are designed to replace the factory hardware, providing superior strength and reliability to ensure the flywheel remains safely mated to the crankshaft under load.

• Fits 7-bolt 4G63 DSM platforms (1993-1999)
• Direct replacement for OEM flywheel hardware
• Specifically excluded from Evolution (EVO) models
• Essential for high-performance street or track builds
• Manufacturer Part Number: 107-2801

ARP fasteners are the industry standard for engine and drivetrain stability, offering the precise tolerances and high clamping force required for 4G63 builds where factory bolts may reach their yield point.

Fits select 1990-2006 Mitsubishi Lancer Evolution, Eclipse, Galant, Eagle Talon, and Plymouth Laser models equipped with the 4G63 engine.

The ARP 107-1003 Cam Tower Bolt Kit provides a high-strength upgrade over factory hardware for the Mitsubishi 4G63 engine. Cam towers are critical components that maintain camshaft alignment and bearing clearances. This kit provides consistent clamping force to ensure the valvetrain stays secure under high RPM and heavy load conditions.

As a direct replacement for worn or stretched OE fasteners, these bolts are designed for durability and precision, meeting the standards required by professional engine builders for the 4G63 platform.

• Application: Mitsubishi 4G63 Engines
• Product Type: Cam Tower Bolt Kit
• Manufacturer Part Number: 107-1003
• Engine Compatibility: Fits both 6-bolt and 7-bolt 4G63 variants within the 1990-2006 year range
• Includes complete set of hardware for cam tower installation

Fits 1990-2005 Eagle Talon, Mitsubishi Eclipse, Galant VR-4, Lancer Evolution, and Plymouth Laser with the 4G63 engine.

Secure your camshaft timing gears with the ARP Cam Sprocket Bolt Kit. Factory hardware can be prone to stretching or fatigue during high-RPM operation or performance builds; this kit provides the clamping force necessary to prevent cam gear slippage. Engineered for maximum reliability, these fasteners are a critical upgrade for any 4G63 rebuild, ensuring your valve timing remains precise under heavy loads.

• Manufacturer Part Number: 107-1002
• Engine Application: Mitsubishi 4G63 / 4G63T
• Replaces standard OE cam sprocket hardware
• Designed for high-performance and racing applications

Each kit includes the necessary bolts and washers to secure both the intake and exhaust cam sprockets to the camshafts.

Fits 2008-2014 Mitsubishi Lancer Evolution (GSR, MR, MR Touring) and Lancer Ralliart (Sedan, Sportback) equipped with the 4B11T engine.

The ARP 107-1001 Cam Tower Stud Kit provides the superior clamping force and valvetrain stability required for high-performance 4B11T engines. Unlike standard factory bolts that can stretch or damage the threads in the aluminum cylinder head during repeated disassembly, these studs provide a permanent and precise mounting solution. By using studs rather than bolts, you ensure even load distribution and prevent thread wear in the head, which is critical for maintaining camshaft alignment and bearing clearances under high-load conditions.

• Manufactured from premium 8740 chrome moly steel for exceptional tensile strength.
• Heat-treated and thread-rolled to ensure maximum fatigue resistance.
• Protects aluminum cylinder head threads from galling and stripping.
• Provides consistent torque loading for more accurate valvetrain assembly.
• Includes all necessary studs and nuts for a complete cam tower installation.
• Manufacturer Part Number: 107-1001

Fits select 1974-2012 Audi and Volkswagen models with 1.8L or 2.0L water-cooled engines, including A3, A4, Golf, GTI, Jetta, and Passat (1.8T / 2.0T / TDI).

Connecting rod bolts are arguably the most critical fasteners in your engine's rotating assembly. This ARP rod bolt kit (MPN: 104-6024) provides a significant upgrade over factory hardware, offering the fatigue strength and tensile integrity required for high-performance builds and high-RPM reliability. These fasteners are precision-machined, heat-treated, and thread-rolled to ensure maximum clamping force and longevity in water-cooled VW and Audi blocks.

• Manufacturer Part Number: 104-6024
• Engine Compatibility: 1.8L, 1.8T, 2.0L, 2.0T, TDI
• Configuration: Water-cooled 4-cylinder
• Quantity: Set of 2 bolts
• Design: High-strength replacement for OE rod bolts

Fits select 1974-2012 Audi and Volkswagen models, including A3, A4, A5, Q5, TT, Golf, GTI, Jetta, and Passat (1.8T / 2.0T).

As the most highly stressed fastener in your engine, rod bolts are critical to the longevity of your rotating assembly. The ARP 104-6004 rod bolt kit replaces factory hardware with high-strength fasteners designed to handle the increased loads of high-RPM operation and forced induction. These bolts provide superior clamping force to prevent rod cap stretch and maintain proper bearing clearance under extreme conditions.

• Manufacturer Part Number: 104-6004
• Application: Water-cooled 1800cc and 2.0L engines
• Engine Compatibility: 1.8T and 2.0T
• Material: High-strength chromoly steel for maximum fatigue life
• Includes: Complete set of connecting rod bolts and nuts

Fits select 2005-2012 Audi and Volkswagen models (including A3, A4, GTI, Jetta, and Passat) equipped with 2.0L and 2.0T engines.

Ensure the structural integrity of your valvetrain with the ARP Cam Tower Bolt Kit. Designed as a high-strength alternative to factory hardware, these fasteners provide the consistent clamping force required to maintain camshaft carrier alignment and prevent mechanical shifting under high-load conditions. Whether you are performing a routine cylinder head service or building a high-performance 2.0T engine, these bolts offer the reliability and precise tolerances that professional engine builders demand to prevent premature wear and maintain oil pressure integrity.

• Manufacturer Part Number: 104-1001
• Engine Compatibility: 2.0L / 2.0T 4-Cylinder (FSI/TSI)
• High-strength material construction for superior tensile strength compared to OE hardware
• Ensures precise camshaft tower-to-head clamping for valvetrain stability
• Ideal for both stock service and high-boost performance applications

Fits select 2000-2011 Lotus Elise and Exige, Toyota Celica, Corolla, and Matrix, and Pontiac Vibe models with the 1.8L (2ZZGE) engine.

The ARP 103-2802 Flywheel Bolt Kit is a critical upgrade for high-performance 2ZZGE applications. These fasteners are engineered to handle the increased shearing forces and rotational stress associated with high-revving engines and aftermarket clutch setups. Replacing factory hardware with ARP fasteners provides superior clamping force and reliability where it matters most: the crankshaft-to-flywheel interface.

• Engineered specifically for the 1.8L 2ZZGE engine platform
• Direct replacement for OEM flywheel hardware
• Provides essential security for high-RPM and track-driven vehicles
• Manufacturer Part Number: 103-2802

Vehicle Fitment

Fits select 2001-2014 Scion and Toyota models (2.4L), including Camry, Corolla, Highlander, Matrix, RAV4, Solara, tC, and xB.

This ARP Flywheel Bolt Kit (MPN: 103-2801) is designed to provide the superior strength and reliability required to secure the flywheel to the crankshaft in high-performance or heavy-duty applications. Standard OE hardware can be prone to stretching or fatigue under increased loads; ARP fasteners are engineered to exceed factory specifications, ensuring drivetrain integrity and safety during high-RPM operation.

• Manufactured from premium 8740 chrome moly steel
• Heat-treated for maximum tensile strength and durability
• Precision-machined threads for consistent and accurate torque loading
• Engineered specifically for the Toyota 2.4L 2AZ-FE engine
• Manufacturer Part Number: 103-2801

Fits 1975-1990 Toyota Pickup, 4Runner, Celica, and Corona models equipped with 2.2L (20R) or 2.4L (22R) engines.

Ensure your clutch assembly remains secure under high RPM and heavy load conditions with the ARP 103-2201 Pressure Plate Bolt Kit. Standard factory hardware is often a weak point in performance builds, prone to stretching or fatigue. These high-strength fasteners are engineered to exceed OEM specifications, providing the increased clamping force and structural integrity required for modified or high-mileage 20R and 22R drivetrains. Each bolt is precision-machined to ensure consistent torque loading across the pressure plate for reliable clutch engagement.

• Manufacturer Part Number: 103-2201
• Application: Pressure Plate to Flywheel mounting hardware
• Engine Compatibility: Toyota 2.2L (20R) and 2.4L (22R)
• Superior strength and fatigue resistance compared to OE bolts
• Precision-manufactured for exact fitment and uniform clamping

Fits 1991-1998 Nissan 240SX (KA24DE).

Protect your engine's rotating assembly from catastrophic failure with the ARP Rod Bolt Kit (MPN: 102-6003). In high-performance or high-RPM applications, the factory connecting rod bolts are often the weak link, prone to stretching and allowing the rod bearings to spin. This kit provides the increased tensile strength and superior clamping force necessary to maintain rod bore roundness and ensure bottom-end reliability under extreme stress.

• Direct replacement for OEM rod bolts
• Specifically designed for the Nissan KA24DE engine
• Critical upgrade for turbocharged or high-RPM engine builds
• Provides more consistent torque loading and fatigue resistance
• Manufacturer Part Number: 102-6003

Reinforce your Nissan's engine bottom end with the ARP Main Stud Kit, engineered for 3.0L VG30DE and VG30DETT DOHC V6 engines. This kit replaces the factory main bolts with high-strength studs, designed to provide superior and more consistent clamping force on the main bearing caps. This is crucial for engine builders pushing higher horsepower, boost, or RPMs, as it helps prevent crankshaft walk and maintains bearing clearances under extreme loads.

ARP main studs offer several advantages over traditional main bolts:

• Increased Clamping Force: Studs provide a more accurate and consistent torque load, reducing cap flex.
• Improved Fastener Life: The stud remains stationary during torqueing, reducing wear and tear on the block threads.
• Enhanced Durability: ARP's proprietary manufacturing process ensures high tensile strength and fatigue resistance.
• Reusable: Unlike TTY (torque-to-yield) bolts, these studs are fully reusable, making future engine servicing more straightforward.

Each kit includes the necessary main studs, washers, and nuts, providing a complete solution for upgrading your engine's foundation. Trust ARP for the ultimate in engine fastener reliability.

• Manufacturer Part Number (MPN): 102-5402
• Engine Fitment: Nissan 3.0L VG30DE, Nissan 3.0L VG30DETT (DOHC V6)

Fits select 1989-2004 Nissan 240SX, Altima, Axxess, D21, Frontier, Pickup, Stanza, and Xterra (2.4L).

The ARP Main Stud Kit is a vital upgrade for high-performance Nissan KA24E and KA24DE 2.4L engine builds. Designed to provide superior clamping force compared to factory main bolts, these studs effectively eliminate main cap walk and help prevent fretting of the block's main bearing surfaces. This ensures a stable and durable bottom end, even under the increased cylinder pressures of turbocharged or high-compression naturally aspirated applications.

• Specifically engineered for Nissan 2.4L KA-series 4-cylinder engines
• Provides consistent and accurate torque loading for improved engine longevity
• Includes all necessary high-strength studs, parallel-ground washers, and nuts
• Manufacturer Part Number: 102-5401

Fits 1989-1998 Nissan 240SX (SR20DET).

The ARP 102-4701 Head Stud Kit is an essential upgrade for maintaining combustion chamber integrity in the Nissan SR20DET engine. Unlike standard torque-to-yield head bolts that stretch during installation and heat cycles, these high-strength studs provide consistent, superior clamping force across the cylinder head. This ensures a more reliable head gasket seal, particularly in turbocharged applications where increased cylinder pressures can lead to gasket failure or head lifting.

Using studs rather than bolts also allows for more accurate torque loading and makes cylinder head removal and installation easier by acting as a guide for the head and gasket. This kit is designed to handle the rigors of high-performance street and track use.

• Manufacturer Part Number: 102-4701
• Application: Nissan SR20DET engine swaps for 1989-1998 240SX
• Provides superior clamping force compared to OE head bolts
• Prevents head gasket leaks and cylinder head lifting
• Includes all necessary studs, nuts, and washers for a complete installation

Upgrade the crucial flexplate connection in your Nissan RB25 (2.0L) or RB26 (2.6L) engine with this high-strength ARP Flexplate Bolt Kit. The flexplate is the critical link between your crankshaft and torque converter in automatic transmission applications, making its fasteners vital for reliable power transfer, especially in modified or high-RPM engines.

Standard factory bolts can be a weak point under increased horsepower, torque, and rev limits. ARP flexplate bolts are precision-engineered from premium materials to provide superior clamping force and withstand extreme stress, preventing slippage or failure that could lead to significant drivetrain damage.

• Replaces factory flexplate bolts for enhanced strength
• Engineered for high-performance and racing applications
• Provides consistent clamping force for reliable power transfer
• Manufacturer Part Number: 102-2901

Fits select 1989-2002 Nissan 240SX, Sentra, 200SX, NX, and Infiniti G20 (2.0L).

The ARP 102-2803 Flywheel Bolt Kit provides the essential clamping force and reliability required for high-performance engine builds and heavy-duty drivetrain applications. Engineered to far exceed the strength of OEM Grade 8 fasteners, these bolts are a critical upgrade when performing a clutch service, manual transmission swap, or an engine build on a 2.0L SR-series engine. Precision-machined to exact tolerances, this kit ensures the flywheel remains securely mated to the crankshaft under the extreme stress of high-RPM operation.

• Manufacturer Part Number: 102-2803
• Engine Compatibility: 2.0L (SR20DE / SR20DET)
• Application: Flywheel to Crankshaft Fasteners
• Fitment: Fits select 1989-2002 Nissan and Infiniti chassis
• Quantity: Full kit for one flywheel application

Fits 1989-2004 Nissan 240SX, Altima, Axxess, D21, Frontier, Pickup, Stanza, and Xterra (2.4L).

Secure your drivetrain with the ARP Flywheel Bolt Kit (MPN: 102-2802), specifically engineered for the Nissan 2.4L KA24 engine. Whether you are performing a clutch replacement or a full engine rebuild, high-quality fasteners are essential to handle the torsional stress between the crankshaft and flywheel. These bolts offer significantly higher strength than standard OEM hardware, providing the reliability needed for both street and performance applications.

• Engineered for Nissan 2.4L (KA24) engines
• Direct replacement for factory flywheel hardware
• Precision-machined for exact fitment and consistent clamping force
• Manufacturer Part Number: 102-2802

Secure your Nissan RB26 engine's flywheel with an ARP Flywheel Bolt Kit. This critical connection between the crankshaft and flywheel endures immense rotational forces and cyclical stresses, especially in performance applications. ARP engineers these bolts for superior strength and reliability, ensuring consistent clamping force to prevent flex and component failure under high RPM.

Each ARP bolt in this kit is precision-machined from premium high-strength material, then heat-treated and thread-rolled to create fasteners that resist fatigue and maintain integrity. The ARP design allows for multiple re-torques without compromising material strength, a significant advantage over stock or lower-grade hardware. Trust ARP to maintain the integrity of your drivetrain.

• Engineered for high-stress flywheel-to-crankshaft connection
• Manufactured from premium high-strength alloy
• Precision-machined threads for optimal engagement and clamping force
• Designed for repeatable assembly and disassembly without loss of integrity
• Direct replacement for Nissan RB26 applications
• Manufacturer Part Number: 102-2801

Upgrade the critical harmonic balancer fastening on your Nissan RB26 engine with the ARP Balancer Bolt Kit. This kit is engineered to provide superior clamping force, ensuring the harmonic balancer remains securely in place even under extreme RPM and vibration.

ARP (Automotive Racing Products) is renowned for manufacturing fasteners that exceed OE strength and durability standards. Replacing the factory balancer bolt with an ARP unit is a common and highly recommended upgrade for performance-built or heavily stressed RB26 engines, preventing potential crankshaft or accessory drive issues caused by balancer wobble or detachment.

• Designed for Nissan RB26 engines
• Provides enhanced clamping force for harmonic balancer
• Engineered for high-performance and racing applications
• Superior strength and reliability over factory hardware
• Manufacturer Part Number: 102-2501

Fits select 1989-2004 Nissan 240SX, Altima, Frontier, Xterra, and Pickup models (2.4L).

Secure your clutch assembly with the ARP 102-2202 Pressure Plate Bolt Kit, designed specifically for the Nissan 2.4L KA24 engine. In high-performance and high-RPM applications, standard OE hardware can be the weak link, potentially leading to catastrophic failure if the bolts stretch or shear. ARP fasteners provide the increased clamping force and fatigue resistance required to handle the stresses of spirited driving or track use.

Each bolt is manufactured from premium 8740 chrome moly steel and heat-treated to 200,000 psi tensile strength. The precision-machined threads ensure consistent torque loading across the pressure plate, while the low-profile head design provides necessary clearance for the clutch release mechanism.

• Manufacturer Part Number: 102-2202
• Material: 8740 Chrome Moly
• Tensile Strength: 200,000 psi
• Fitment: Nissan 2.4L KA24 engines
• Includes: Complete set of pressure plate bolts
• Replaces factory hardware for improved reliability and safety

Fits select 1991-2002 Infiniti G20 and Nissan 200SX, NX, and Sentra models.

The ARP 102-2201 Pressure Plate Bolt Kit provides the critical clamping force required to keep your clutch assembly securely fastened to the flywheel. Designed for high-performance applications, this kit replaces standard factory hardware that is prone to stretching or fatigue under high RPM and increased torque loads. Each fastener is precision-machined to ensure consistent loading and a perfect fit for your drivetrain.

• Manufacturer Part Number: 102-2201
• Engineered for high-strength durability and superior tensile strength
• Precision-rolled threads for accurate torque application and fastener longevity
• Designed specifically as a high-performance replacement for OE hardware

Fitment Table:

Secure your Mini Cooper S flywheel with an ARP Flywheel Bolt Kit, engineered for superior strength and reliability compared to factory fasteners. When upgrading your clutch, performing engine work, or building a high-performance Mini, upgrading to high-strength flywheel bolts is critical to prevent dangerous flywheel separation under load.

ARP (Automotive Racing Products) is renowned for producing fasteners that withstand extreme stress and vibration. This kit provides the necessary clamping force to keep your flywheel securely attached to the crankshaft, ensuring consistent power transfer and safety for your Mini Cooper S.

• Direct replacement for OEM Mini Cooper S flywheel bolts.
• Engineered for high-performance applications and enhanced durability.
• Provides superior clamping force to prevent flywheel separation.
• Manufactured by ARP, Part Number: 101-2802.

Fits 2007-2010 Mini Cooper Base and Clubman (1.6L).

The ARP 101-2801 Flywheel Bolt Kit provides a critical upgrade for the drivetrain of your 1.6L 4-cylinder engine. In high-performance and high-RPM applications, the connection between the crankshaft and the flywheel is subject to extreme stress and vibration. This kit replaces factory hardware with high-strength fasteners engineered to provide superior clamping force and reliability, ensuring the flywheel remains securely seated under all driving conditions.

• Manufacturer Part Number: 101-2801
• Compatible Engines: BMW-designed 1.6L N12, N14, N16, and N18
• Designed for 4-cylinder applications
• Ensures proper torque retention for manual transmission setups
• Engineered for direct-fit installation on factory mounting points

When upgrading or replacing a clutch in your Mini, don't overlook the critical pressure plate fasteners. This ARP Pressure Plate Bolt Kit is engineered for high-performance applications, providing superior clamping force and reliability compared to factory hardware. Designed specifically for Mini models equipped with the W11/B16 1.6L engine, these bolts are crucial for securely attaching the pressure plate to the flywheel.

ARP fasteners are renowned in the automotive industry for their exceptional strength and precision manufacturing. Each bolt is crafted to exact tolerances, ensuring optimal fitment and consistent torque readings. This kit delivers the peace of mind that comes with knowing your clutch assembly is secured with premium, reusable hardware, capable of withstanding the stresses of spirited driving and track use.

• Replaces factory pressure plate bolts
• Designed for Mini W11/B16 1.6L engines
• Engineered for superior strength and clamping force
• Reusable high-quality fasteners
• Manufacturer Part Number: 101-2202

Fits select 2007-2014 Mini Cooper, Cooper Countryman, and Cooper Paceman models (1.6L).

Ensure your clutch assembly remains secure under demanding driving conditions with the ARP Pressure Plate Bolt Kit. Designed specifically for the BMW-sourced 1.6L N12 and N14 engines found in the second-generation Mini, this hardware kit (101-2201) provides the superior clamping force and fastener strength required for high-RPM operation and performance driving. These bolts replace the standard factory hardware, which can be prone to stretching or failure during aggressive shifting or high-load scenarios.

• Fits 1.6L N12 and N14 engines
• Direct replacement for OE pressure plate fasteners
• Precision-machined for exact fitment and thread engagement
• Engineered to withstand higher rotational stresses than standard bolts
• Manufacturer Part Number: 101-2201