Fits select 2002-2009 Chevrolet SSR, Trailblazer, and GMC Envoy models including EXT, XL, XUV, SS, and Denali trims.

The Belltech 25011 Street Performance front strut is engineered to replace restrictive factory struts on SUVs and trucks, offering a significant upgrade in handling and ride quality. Featuring a patented ring and perch system, these struts allow for precise ride height adjustment ranging from a 2-inch drop to a 1-inch lift. This versatility makes them an ideal solution for leveling your vehicle or achieving a customized lowered stance without sacrificing safety or performance.

Each strut is built for durability and precision control, utilizing application-specific valving to manage larger wheel and tire combinations. The design incorporates oversized 50mm shock bodies and 18mm piston rods to resist fade and maintain consistent damping under various road conditions.

• Adjustable ride height: -2" lowering to +1" lifting
• Oversized 50mm shock bodies for increased oil capacity
• 18mm hardened chrome piston rods for maximum strength
• Independent 35mm compression and rebound valves for tuned performance
• Progressive rate polymer bump stops for controlled bottoming
• Direct replacement for OE strut assemblies
• Manufacturer Part Number: 25011

Fits 2004-2015 Nissan Titan and 2005-2015 Nissan Armada. This Belltech Street Performance height-adjustable strut (MPN: 25009) is a performance-tuned replacement for factory front struts, designed to improve damping control while giving you the ability to lift or lower your vehicle from a single part number.

Using Belltech's patented ring and perch system, these struts provide an adjustment range from a 2-inch drop to a 2-inch lift. This allows you to level your truck, compensate for heavy accessories, or achieve a custom stance without sacrificing ride quality. The oversized internals and application-specific valving offer better stability and safety compared to worn original equipment or generic universal shocks.

• Patented ring and perch system for ride height adjustment from -2 inches to +2 inches
• Large 50mm shock bodies for increased oil capacity and thermal stability
• Heavy-duty 18mm piston rods for increased durability
• Independent 35mm compression and rebound valves tuned specifically for the Titan and Armada chassis
• Progressive rate polymer bump stops provide controlled compression at the limit of travel
• Application-specific design ensures proper geometry and bolt-on installation
• Manufacturer Part Number: 25009

Fits 2015-2020 Ford F-150 2WD (King Ranch, Lariat, Limited, Platinum, XL, XLT, SSV, and Police Responder).

The Belltech 25007 Street Performance strut is a versatile suspension replacement designed to give Ford F-150 owners precise control over their vehicle's stance. Featuring a patented ring and perch system, this strut allows for ride height adjustments ranging from a 3-inch drop to a 1-inch lift, all from a single part number. Engineered with application-specific valving, it improves handling and stability while maintaining daily driving comfort.

• Adjustable ride height range: -3 inches to +1 inch
• Heavy-duty 50mm shock bodies for superior heat dissipation
• Hardened 18mm piston rods for increased strength
• Independent 35mm compression and rebound valves tuned specifically for F-150 applications
• Progressive rate polymer bump stops for controlled compression
• Direct replacement for OE strut assemblies using factory mounting points
• Manufacturer Part Number: 25007

Fits select 2007-2020 Cadillac Escalade, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, and GMC Sierra 1500, Yukon, and Yukon XL models.

The Belltech Street Performance adjustable front strut (MPN: 25004) is engineered as a performance-driven replacement for factory strut-equipped trucks and SUVs. This versatile unit provides the ride quality and safety expected from Belltech while giving installers complete control over vehicle stance. Utilizing a patented ring and perch system, this strut allows for ride height adjustments ranging from a 2-inch drop to a 2-inch lift, all from a single part number.

Built to handle the demands of modern GM chassis, these struts feature oversized 50mm shock bodies and 18mm hardened piston rods for increased fluid capacity and structural rigidity. Independent 35mm compression and rebound valves are application-specific, ensuring tuned damping that improves handling without sacrificing comfort.

• Fits select GM full-size trucks and SUVs from 2007-2020
• Adjustable ride height from -2.0" to +2.0"
• Large 50mm shock bodies for improved thermal stability
• Heavy-duty 18mm piston rods
• Application-specific 35mm compression and rebound valves
• Progressive rate polymer bump stops for bottom-out protection
• Manufacturer Part Number: 25004

Fits select 2004-2013 Ford F-150 and F-150 Heritage models including FX2, Harley-Davidson, King Ranch, Lariat, Platinum, STX, XL, XLT, and SVT Lightning.

The Belltech Street Performance 25001 front strut provides a performance-tuned replacement for factory truck and SUV struts, allowing for precision ride-height adjustment. Using Belltech's patented ring and perch system, this single part number provides the flexibility to choose between an OEM stock height, a 1-inch lift, or up to a 3-inch drop, ensuring you achieve the exact stance and clearance your build requires.

Engineered for improved handling and safety without sacrificing ride quality, these struts feature application-specific tuning. The oversized 50mm shock bodies and 18mm piston rods provide increased fluid capacity and structural rigidity for demanding street use.

• Adjustable ride height range: -3.0 inches to +1.0 inch
• 50mm shock bodies for increased durability
• 18mm hardened chrome piston rods
• Independent 35mm compression and rebound valves
• Progressive rate polymer bump stops for controlled bottom-out protection
• Manufacturer Part Number: 25001

Fits select 1988-2000 Chevrolet and GMC C1500, C2500, Suburban, Tahoe, Yukon, and Blazer models.

Lower your vehicle's center of gravity without compromising ride quality with the Belltech 2-Inch Drop Spindle Set. By relocating the spindle pin higher on the casting, these spindles provide a full 2-inch drop while maintaining your original suspension geometry and alignment capability. This design eliminates the excessive ball joint, shock, and tire wear often associated with other lowering methods.

Each spindle is engineered for maximum structural integrity, crafted from high-strength ductile iron castings that are CNC-machined for precise tolerances. A durable powder-coated finish provides long-lasting corrosion resistance, ensuring these components meet or exceed factory specifications for demanding street and sport truck applications.

• Provides a 2-inch front drop
• Maintains factory ride quality and suspension geometry
• Uses factory ball joints and tie rod ends
• Direct bolt-in installation to factory mounting points
• CNC-machined from high-strength ductile iron
• Corrosion-resistant powder-coated finish
• Manufacturer Part Number: 2500

Fits select 1982-2004 Cadillac Escalade, Chevrolet Blazer, S10, Tahoe, Suburban, GMC Jimmy, Sonoma, S15, Yukon, and Isuzu Hombre.

The Belltech Street Performance lowering shock series is engineered to provide premium ride quality and chassis control for trucks and SUVs. These dampers are specifically tuned to improve low-speed compression characteristics, which are responsible for managing vehicle pitch, roll, dive, and squat. This tuning ensures your vehicle remains stable and predictable during cornering and braking.

Featuring progressive rebound tuning, these shocks are designed to complement the increased unsprung weight of large aftermarket wheels, maintaining a ride that is firm and controlled without being harsh. The twin-tube design utilizes a large 45mm body to increase oil capacity, improving heat dissipation and extending the service life of the internal components.

• Manufacturer Part Number: 2412IF
• Large 45mm body diameter for superior oil volume and cooling
• 35mm piston and valving for precise hydraulic control during rapid wheel movements
• Low-friction sealing and guide system for quick-reacting damping and reduced heat
• Durable steel dust cover protects the piston rod and sealing system from debris and UV exposure
• Tuned high-durometer vulcanized rubber bushings for reduced noise, vibration, and harshness (NVH)
• 2-Year Unlimited Mileage Warranty

Fits select 2000-2020 Chevrolet Avalanche, Suburban, Tahoe, and GMC Yukon / Yukon XL models. This Belltech Street Performance lowering shock absorber (MPN: 2412FF) is engineered to restore and enhance ride quality for modern trucks and SUVs, specifically focusing on low-speed compression tuning. By controlling pitch, roll, dive, and squat, these shocks provide a more stable and confident driving experience even with larger aftermarket wheels.

• Precision Damping: Features progressive rebound tuning to maintain a smooth yet firm ride, effectively managing quick wheel movements.
• Robust Construction: Built with a large 45mm body and 35mm piston/valves in a twin-tube design for increased oil volume and superior heat dissipation.
• Low Friction System: A specialized sealing and guide system creates a quick-reacting damper that remains sensitive to minor motions without overheating.
• Durable Protection: Includes a steel dust cover to protect the piston rod and sealing system from UV exposure and road chemicals.
• Reduced NVH: High-durometer vulcanized rubber bushings are tuned to minimize noise, vibration, and harshness.
• Warranty: 2-Year Unlimited Mileage warranty.

Fits select 1982-2004 Chevrolet Blazer, S10, Suburban, and Tahoe, GMC Sonoma, Jimmy, and Yukon, and Isuzu Hombre.

The Belltech Street Performance lowering shock lineup is engineered to provide premium ride quality for trucks and SUVs. Belltech engineers focused on tuning the low-speed compression characteristics to control vehicle pitch, roll, dive, and squat, ensuring you remain confident and in control. The progressive rebound tuning is specifically designed to complement larger aftermarket wheels, keeping the ride smooth yet firm.

• Precision Damping: Low-friction sealing and guide system creates a quick-reacting damper sensitive to the smallest motions.
• Robust Construction: Large 45mm body diameter and twin-tube design allow for increased oil volume and improved heat dissipation.
• Enhanced Control: 35mm piston and valves provide superior hydraulic control during rapid wheel movements and long shock travel.
• Protection & Durability: Steel dust cover protects the piston rod and sealing system from UV exposure and chemicals.
• NVH Reduction: Tuned high-durometer vulcanized rubber bushings reduce noise, vibration, and harshness.
• Manufacturer Part Number: 2410IF
• Warranty: 2-Year / Unlimited Mileage.

Fits select 2000-2020 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, and Trailblazer, and GMC Envoy and Yukon models.

The Belltech Street Performance shock absorber series is engineered to provide premium ride quality for modern trucks and SUVs. This damper focuses on low-speed compression characteristics, specifically tuned to control vehicle pitch, roll, dive, and squat. By managing these forces, the Street Performance line keeps your sport truck or SUV composed and confident during cornering and braking.

Each shock features a large 45mm body diameter and a twin-tube design, allowing for increased oil volume and superior heat dissipation. This construction prevents performance fade during heavy use and extends the service life of the damper. The internal 35mm piston and valve assembly provide precise hydraulic control, while the progressive rebound tuning ensures a smooth, firm ride that complements large aftermarket wheels and tires.

• 45mm body diameter with twin-tube design for maximum heat dissipation
• 35mm piston and valves for refined hydraulic control
• Progressive rebound tuning for improved handling with larger wheel sets
• Low-friction sealing and guide system for rapid damping response
• High-durometer vulcanized rubber bushings to reduce noise, vibration, and harshness (NVH)
• Durable steel dust cover protects the piston rod and sealing system from debris and UV
• Manufacturer Part Number: 221466 / 2410FF
• Warranty: 2-Year / Unlimited Mileage

Fits select 2003-2013 Ford F-150, F-150 Heritage, Expedition, and Lincoln Navigator (8-Cylinder).

The Belltech PRO COIL SPRING SET (MPN: 23807) provides an advanced, adjustable lowering solution for your truck or SUV. This kit utilizes high-quality coil springs paired with vehicle-specific upper spring spacers, allowing you to configure either a 2-inch or 3-inch drop using a single part number. Unlike standard lowering springs, Belltech engineers these sets to prioritize ride comfort and quality while significantly sharpening the handling performance of your Sport Truck or SUV.

• Cold wound from high-tensile chromium alloy steel for superior durability
• Shot peened and powder coated to exact specifications for corrosion resistance and long service life
• Includes vehicle-specific spacers for adjustable 2" or 3" ride height reduction
• Designed to improve cornering and stance without sacrificing daily driveability
• Manufacturer Part Number: 23807
• Lowering Range: 2 to 3 Inches

Fits select 1997-2003 Ford F-150, Ford Expedition, and 1998-2002 Lincoln Navigator (V8 models).

The Belltech Pro Coil Spring set (MPN 23804) provides an advanced, adjustable lowering solution for your Sport Truck or SUV. Unlike fixed-height springs, this kit includes high-quality coil springs paired with vehicle-specific spacers, allowing you to choose between a 2-inch or 3-inch drop with a single part number. These springs are engineered to improve handling performance and center of gravity without sacrificing ride comfort.

Each spring is manufactured from cold wound chromium alloy steel for maximum fatigue resistance. The coils are then shot-peened and finished with a durable powder coating to ensure consistent ride height and long-term protection against the elements.

• Drop Height: 2" or 3" (Adjustable via included spacers)
• Construction: Cold wound chromium alloy steel
• Processing: Shot-peened for increased durability
• Finish: Protective powder coating
• Part Number: 23804
• Included Hardware: Coil springs and vehicle-specific upper spring spacers

Fits select 2021-2025 Ford F-150 2WD models including XL, XLT, Lariat, and Platinum.

Achieve a precise 2-inch front drop while preserving your truck's original driving dynamics with the Belltech Drop Spindle Set. By relocating the spindle pin higher on the casting, these spindles lower the vehicle's center of gravity without altering the factory suspension geometry. This approach ensures that your Ford F-150 maintains its factory ride quality and alignment capabilities while avoiding the premature wear on ball joints and shocks often caused by other lowering methods.

Each spindle (MPN 2353) is manufactured from high-strength ductile iron castings that are CNC-machined for exact tolerances and finished with a durable powder coating for long-term corrosion resistance. Designed as a direct bolt-in component, these spindles allow you to reuse your factory ball joints and tie rod ends for a seamless installation.

• Provides a 2" front drop
• Maintains factory suspension geometry and alignment
• Retains OEM ride quality and steering feel
• Crafted from CNC-machined high-strength ductile iron
• Durable powder-coated finish for longevity
• Uses factory ball joints and tie rod ends
• Simple, direct bolt-in installation
• Manufacturer Part Number: 2353

Fits 2015-2020 Ford F-150 2WD models (All Cabs) including XL, XLT, Lariat, King Ranch, Platinum, Limited, and SSV trims.

Lower your F-150 without compromising ride quality or suspension performance. Belltech Drop Spindles relocate the spindle pin higher on the casting to provide a 2-inch drop while maintaining critical factory suspension geometry. Unlike other lowering methods that can lead to premature wear on ball joints, shocks, and tires, these spindles preserve the factory spring rate and shock travel for an OE-level ride.

Each spindle is engineered from high-strength ductile iron castings, CNC-machined for precise fitment, and finished with a durable powder coating for long-term corrosion resistance. This direct bolt-in solution is designed to work seamlessly with your factory ball joints and tie rod ends, ensuring a straightforward installation and reliable alignment.

• Provides a 2" front drop
• Crafted from CNC-machined, high-strength ductile iron
• Maintains factory suspension geometry and alignment specs
• Retains OEM ride quality and shock travel
• Compatible with factory ball joints and tie rod ends
• Durable powder-coated finish
• Manufacturer Part Number: 2352

Lower your vehicle without compromising ride comfort with the Belltech 2-inch Drop Spindle Set (MPN: 2350). Specifically engineered for 2WD 1997-2003 Ford F-150, Expedition, and Lincoln Navigator models, these spindles relocate the spindle pin to achieve a lower stance while maintaining critical factory suspension geometry. This design eliminates the excessive ball joint, shock, and tire wear often found with other lowering methods, ensuring your alignment remains within factory specifications.

• Direct bolt-in installation for a precise 2-inch front drop
• Maintains factory ride quality and steering geometry
• Uses original equipment (OE) ball joints and tie rod ends
• Constructed from high-strength, CNC-machined ductile iron castings
• Durable powder-coated finish for superior corrosion resistance
• Includes driver and passenger side spindles

Each spindle is crafted to meet or exceed factory structural requirements, providing the durability needed for heavy-duty street use. By keeping the suspension travel centered in its original range, you preserve the factory damping characteristics while improving the overall look and center of gravity of your sport truck or SUV.

Fits 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 models (including Classic and Hybrid variants).

The Belltech Pro Coil Spring Set (MPN: 23458) provides a versatile solution for truck owners seeking an adjustable front-end drop. This kit allows for either a 2-inch or 3-inch lowering height by utilizing high-quality coil springs paired with vehicle-specific upper spring spacers. Unlike generic lowering springs, Belltech engineers these sets to maintain ride comfort while significantly improving the handling and stance of your Sport Truck or SUV.

• Adjustable Drop: Achieve a 2" or 3" drop using the included vehicle-specific spacers.
• Premium Construction: Manufactured from cold-wound chromium alloy steel for maximum durability.
• Surface Treatment: Shot-peened and powder-coated to prevent corrosion and ensure a long service life.
• Performance Optimized: Engineered to provide precise ride height without compromising ride quality or suspension travel.
• Manufacturer Part Number: 23458

Fits select 1988-2000 Chevrolet and GMC C1500, C2500, Suburban, Tahoe, Yukon, and Blazer models.

The Belltech Pro Coil Spring Set 23452 provides a versatile, high-performance lowering solution for the front of your GMT400-platform truck or SUV. This advanced kit includes two cold-wound chromium alloy steel springs and vehicle-specific upper spacers, allowing you to choose between a 2-inch or 3-inch drop with a single part number. Unlike standard lowering springs, Belltech engineers these coils to improve cornering stability and handling performance while maintaining the ride quality necessary for a daily-driven Sport Truck.

Each spring in this set is shot-peened and powder-coated to meet exacting tolerances, ensuring a consistent ride height and long-term resistance to sagging. This configuration is specifically designed to accommodate the weight requirements of extended cab and 454 SS models, providing the aggressive stance you want without sacrificing suspension travel or comfort.

• Manufacturer Part Number: 23452
• Lowering Range: 2" or 3" (Adjustable via included spacers)
• Material: Cold-wound chromium alloy steel
• Finish: Durable powder coating
• Construction: Shot-peened for increased fatigue life and durability
• Fitment: Engineered for select 1988-2000 GM C-Series trucks and SUVs
• Includes: (2) Lowering coil springs, (2) vehicle-specific spacers

Fits 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 (1500 Classic models included for 2007).

The Belltech Pro Coil Spring Set (MPN 23408) provides a versatile, engineered solution for lowering the front of your GM 1500 truck. This advanced kit includes high-quality coil springs paired with vehicle-specific upper spring spacers, allowing you to achieve either a 2-inch or 3-inch drop using a single part number. This adjustable design ensures you get the exact stance you want without needing to swap components.

Constructed from cold wound chromium alloy steel, these springs are shot peened and finished with a durable powder coating to maintain precise ride height and structural integrity over time. Belltech focuses on both ride quality and handling performance, reducing body roll and improving road feel without the harshness often associated with lowering springs.

• Drop Height: Adjustable 2" or 3" front lowering
• Material: Cold wound chromium alloy steel
• Construction: Shot peened and powder coated for maximum durability
• Included Hardware: Two coil springs and vehicle-specific upper spacers
• Handling: Improved center of gravity and reduced body roll
• Manufacturer Part Number: 23408

Fits select 1988-1998 Chevrolet and GMC C1500 standard cab trucks.

The Belltech Pro Coil Spring set (MPN 23405) provides a versatile suspension tuning solution for the GMT400 platform. By utilizing high-quality coil springs combined with vehicle-specific spacers, this kit allows you to choose between a 2-inch or 3-inch front drop to achieve your desired stance and center of gravity.

Built for the demands of sport trucks, these springs are manufactured from cold wound chromium alloy steel. Each coil is shot peened and powder coated to strict tolerances, ensuring the material retains its spring rate and ride height over years of hard use. Beyond the visual drop, these springs are engineered to improve handling performance and cornering stability without the harshness often associated with aftermarket lowering kits.

• Adjustable drop height of 2" or 3"
• Precision cold wound chromium alloy steel construction
• Shot peened and powder coated finish for corrosion resistance
• Maintains ride quality while improving handling and response
• Includes vehicle-specific upper spring spacers for height adjustment
• Manufacturer Part Number: 23405

Fits select 1982-2005 Chevrolet S10, S10 Blazer, and Blazer; GMC Sonoma, S15 Jimmy, and Jimmy; and Isuzu Hombre models (4 and 6-Cylinder).

The Belltech Pro Coil Spring Set provides a versatile lowering solution for S-series trucks and SUVs. This kit features high-performance coil springs paired with vehicle-specific upper spring spacers, allowing you to choose between a 2-inch or 3-inch front drop using a single part number. Unlike standard lowering springs, the Pro Coil series is engineered to improve handling response and reduce body roll without sacrificing ride quality.

Each spring is manufactured from cold-wound chromium alloy steel for maximum durability and consistent spring rates. The coils undergo a shot-peening process to increase fatigue life and are finished with a durable powder coating to resist corrosion in harsh environments.

• Manufacturer Part Number: 23227
• Lowering Range: 2.0" to 3.0" (Adjustable via included spacers)
• Material: Cold-wound chromium alloy steel
• Construction: Shot-peened for increased longevity
• Finish: Protective powder coating
• Included Hardware: Lowering springs and vehicle-specific upper spacers

Fits select 1988-2000 Chevrolet and GMC C1500, C2500, C3500, K1500, and Suburban models. Please see the vehicle fitment table for specific trim and engine compatibility.

The Belltech Street Performance lowering shock series is engineered to provide premium ride quality and enhanced handling for modern trucks and SUVs. This damper focuses on low-speed compression tuning to control body movements such as pitch, roll, dive, and squat, keeping your vehicle stable and composed. The progressive rebound tuning is specifically designed to complement larger aftermarket wheels, ensuring a ride that is firm and controlled without being harsh.

Constructed with a large 45mm body diameter in a twin-tube design, these shocks accommodate a higher oil volume for superior heat dissipation and extended service life. A 35mm piston and valve assembly provides precise hydraulic control during rapid wheel movements, while the low-friction sealing system ensures a quick-reacting damper that resists temperature-induced fading.

• Large 45mm body diameter with twin-tube design for better heat management
• 35mm piston and valves for improved hydraulic control
• Progressive rebound tuning for smooth handling with aftermarket wheels
• Low-friction sealing and guide system for rapid damping response
• Durable steel dust cover protects the piston rod and sealing system from debris
• High-durometer vulcanized rubber bushings to minimize NVH (noise, vibration, and harshness)
• Manufacturer Part Number: 2214IF
• Warranty: 2-Year / Unlimited Mileage

Fits select 1975-2005 Chevrolet C10/C1500/C2500/C3500, S10 Blazer, and S10; GMC Jimmy, Sonoma, and Syclone; and Isuzu Hombre.

The Belltech Street Performance shock absorber series is engineered to provide premium ride quality and enhanced handling for trucks and SUVs. This damper is specifically tuned to improve low-speed compression, which directly controls vehicle pitch, roll, dive, and squat. By managing these forces, Belltech helps maintain chassis stability and driver confidence during cornering and braking.

Constructed with a large 45mm body diameter and a twin-tube design, these shocks provide increased oil volume for superior heat dissipation, preventing fade during extended use. The 35mm piston and valve assembly allow for precise hydraulic control during rapid wheel movements. To ensure a quiet and comfortable cabin, high-durometer vulcanized rubber bushings are used to isolate noise, vibration, and harshness (NVH).

• Part Number: 2212IF
• 45mm body diameter with twin-tube construction
• 35mm piston and valving for responsive damping
• Progressive rebound tuning optimized for large aftermarket wheels
• Low-friction sealing and guide system for quick reaction times
• Durable steel dust cover protects the piston rod and seals from UV and debris
• High-durometer vulcanized rubber bushings for reduced NVH

Fits select 1973-2018 Chevrolet, GMC, and Dodge trucks and SUVs (5.9L).

The Belltech Street Performance shock absorber is engineered to deliver premium ride quality and enhanced chassis control for lowered trucks and SUVs. By specifically tuning low-speed compression characteristics, this damper manages the pitch, roll, dive, and squat of your vehicle, ensuring more stable handling during cornering and braking. The progressive rebound tuning is optimized to complement large aftermarket wheel and tire packages, maintaining a firm but smooth ride.

Constructed with a large 45mm body diameter and a twin-tube design, these shocks provide increased oil volume for superior heat dissipation during heavy use. The internal 35mm piston and valving offer precise hydraulic control throughout the suspension travel, while high-durometer vulcanized rubber bushings isolate the chassis from noise, vibration, and harshness (NVH).

• Twin-tube design with 45mm body for increased oil capacity and cooling
• Large 35mm piston and valving for responsive hydraulic control
• Progressive rebound tuning for stability with aftermarket wheels
• Low-friction sealing and guide system for quick-reacting damping
• Steel dust cover protects the piston rod and seals from debris and UV exposure
• High-durometer vulcanized rubber bushings for reduced NVH
• Manufacturer Part Number: 2212FF
• Warranty: 2-Year / Unlimited Mileage