Fits select 2006-2013 BMW 325i, 328i, 330i, 335d, 335i, and 335is models.

The Bilstein B4 Series OE Replacement damper is engineered to restore your vehicle's original handling characteristics and ride comfort. Built to meet or exceed original equipment standards, this twintube strut provides precise construction and high power reserves to ensure safety and consistent performance. This unit is a direct-fit replacement for the factory front left strut, making it an ideal choice for drivers looking to maintain the factory driving dynamics and safety of their BMW 3-Series.

• Manufacturer Part Number: 22-135032
• Position: Front Left
• Design: Twintube gas pressure technology
• Restores original driving comfort and safety standards
• Constant damping power under varying load conditions
• High OE quality and manufacturing precision

Fits select 2005-2018 Audi A3, A3 Quattro, Volkswagen Eos, and Jetta (2.0T).

The Bilstein B4 OE Replacement damper is engineered specifically to restore the original ride quality, handling, and safety of your vehicle. These dampers utilize a gas-pressure twintube design, calibrated to meet or exceed original equipment standards. Whether you are addressing worn factory components or looking to reclaim a factory-fresh driving feel, these struts provide the precise construction and high power reserves necessary for consistent performance.

• Manufacturer Part Number: 22-131614
• Series: B4 OE Replacement
• Internal Design: Twintube
• Position: Front
• Finish: Black Paint
• Direct-fit installation on factory mounting points
• Restores original driving comfort and safety

Fits select 2010-2015 Volkswagen Golf and Jetta models with a 50mm outer diameter front strut housing.

The Bilstein B4 OE Replacement gas pressure strut is engineered to restore the original driving comfort and handling characteristics of your vehicle. Designed to meet or exceed original equipment standards, these dampers provide constant damping power under any load and high power reserves for maximum safety. The twin-tube design ensures precise construction and high OE-quality performance as a direct replacement for your worn factory struts.

• Manufacturer Part Number: 22-131607
• Series: B4 OE Replacement
• Placement: Front
• Housing Diameter: 50mm OD
• Internal Design: Twin-tube gas pressure
• Build: Restores original performance and safety standards

Fits 2002-2008 Mini Cooper Base and S models.

The Bilstein B4 OE Replacement strut assembly is engineered to restore the original ride quality and handling characteristics of your vehicle. This front right twintube damper is a direct-fit solution that meets or exceeds original equipment standards, providing a cost-effective way to regain factory-fresh suspension performance and safety.

• Gas pressure twintube technology for consistent damping under load
• Restores original driving comfort and handling precision
• High power reserves for maximum stability and safety
• Direct fitment to factory mounting points
• Engineered for the 2002-2008 Mini R50, R52, and R53 chassis
• Manufacturer Part Number: 22-119193

Fits 2002-2008 Mini Cooper Base and S models.

The Bilstein B4 OE Replacement (22-119186) is a front left twintube strut assembly engineered to restore the original driving dynamics and ride quality of your vehicle. Designed to meet or exceed OE standards, this strut provides the precise construction and reliability needed to maintain factory handling performance and safety characteristics.

• Position: Front Left
• Design: Twintube gas pressure technology for consistent damping
• Direct fit OE replacement that restores original driving comfort and handling
• High power reserves for maximum stability and safety under various driving conditions
• Engineered for precise construction and exact fitment to factory mounting points
• Manufacturer Part Number: 22-119186

Whether you are replacing a leaking factory strut or looking to eliminate suspension noise and vibration, the B4 series offers a world-famous Bilstein quality solution that brings your Mini's suspension back to its original factory specifications.

Fits 1997-2004 Porsche Boxster models including Base, Roadster, and S trims.

The Bilstein B4 series is engineered to restore your Porsche's original ride quality and handling performance. As an OE replacement damper, this front strut assembly is designed to meet or exceed original equipment standards, utilizing Bilstein’s world-renowned gas-pressure technology to maintain constant damping power under any load. This ensures a consistent, safe driving experience with the same precision and comfort the vehicle had when it left the factory.

Constructed for a direct-fit installation, the B4 damper replaces worn factory units to provide high power reserves and maximum stability. Whether navigating tight corners or daily commuting, these struts deliver the reliability and quality synonymous with the Bilstein name.

• Manufacturer Part Number: 22-113313
• Location: Front
• Technology: Twin-tube gas pressure
• Restores original driving comfort, handling, and safety
• Direct-fit OE replacement for factory-style installation
• Precise construction for maximum durability and performance

Fits select 2004-2015 Mazda 3, 5 and Volvo C30, C70, S40, V50. This Bilstein B4 OE Replacement damper is engineered specifically to restore the original ride quality, handling, and safety of your vehicle. Designed to meet or exceed original equipment standards, it serves as a direct-fit replacement for a worn front right (passenger side) factory strut.

Constructed with Bilstein Gas Pressure Technology, this strut provides consistent damping performance and high power reserves for maximum stability under various driving conditions. It is the ideal choice for drivers looking to maintain factory-level comfort while benefiting from the durability and precision of the Bilstein B4 series.

• Manufacturer Part Number: 22-112880
• Position: Front Right (Passenger Side)
• Technology: Gas Pressure Twin-Tube
• Design: MacPherson Strut
• Maintains original driving comfort and handling characteristics
• Direct-fit OE replacement part

Fits select 2004-2015 Mazda 3, Mazda 5, and Volvo C30, C70, S40, and V50 models.

Bilstein B4 OE Replacement dampers are engineered to restore your vehicle's original ride quality and handling performance. This front left strut assembly utilizes Bilstein's signature Gas Pressure Technology to provide consistent damping and high power reserves for maximum safety on the road. Designed to meet or exceed original equipment standards, the B4 series is the ideal choice for maintaining the factory driving experience and safety characteristics of your vehicle.

• Restores original driving comfort, handling, and safety
• High power reserves for maximum control in all driving conditions
• Bilstein Gas Pressure Technology for consistent damping performance
• Direct-fit design engineered to meet or exceed OE quality standards
• Position: Front Left
• Series: B4 OE Replacement
• Manufacturer Part Number: 22-112811

Fits select 1999-2006 BMW 323Ci, 323i, 325Ci, 325i, 328Ci, 328i, 330Ci, and 330i Base models.

The Bilstein B4 Series OE Replacement damper is engineered to restore the factory ride quality and handling performance of your BMW. Utilizing a twintube gas pressure design, these struts meet or exceed original equipment standards, providing a precise fit and predictable damping characteristics. This front right strut is the ideal choice for maintaining the comfort and safety levels originally designed for the 3-Series chassis.

• Restores original driving comfort and handling response
• High power reserves ensure maximum stability and safety under load
• Precise twintube construction for consistent performance
• Engineered as a direct-fit replacement for the factory assembly
• Manufacturer Part Number: 22-103109
• Position: Front Right
• Design: Twintube Gas Pressure

Fits select 1999-2006 BMW 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, and 330Ci models.

The Bilstein B4 OE Replacement damper is specifically engineered to restore the original ride quality and handling performance of your vehicle. Designed to meet or exceed original equipment standards, these dampers are the ideal choice for drivers looking to maintain factory-level comfort and safety. Built with world-famous Bilstein quality, this twintube strut assembly provides precise construction and high power reserves for consistent performance across all driving conditions.

• Restores original driving comfort, handling, and safety
• High power reserves for maximum safety under diverse loads
• Built to precise OE quality standards for a direct-fit replacement
• Durable twintube design for consistent damping characteristics
• Manufacturer Part Number: 22-103093
• Position: Front Left

Vehicle Fitment

Fits select 1984-1995 Mercedes-Benz 190D, 190E, 260E, 300CE, 300D, 300E, 300TD, 300TE, E300, and E320.

Bilstein B6 Performance dampers provide a significant handling upgrade for vehicles maintaining their original ride height. These monotube gas-pressure shocks are specifically engineered to be paired with factory OE springs, delivering improved damping control and lane stability without the need for a full suspension overhaul. Each unit features application-specific valving designed to optimize the chassis dynamics of the W201 and W124 Mercedes-Benz platforms.

Built to meet or exceed OE standards, these dampers utilize Bilstein's world-famous gas-pressure technology to ensure consistent, fade-free performance even under extreme driving conditions. By replacing worn factory units with B6 Performance dampers, you regain original steering precision and gain enhanced grip for safer day-to-day operation.

• Manufacturer Part Number: 22-100436
• Product Series: B6 Performance
• Internal Design: Monotube Gas-Pressure
• Installation Position: Front
• Spring Compatibility: Designed for use with original factory springs
• Performance Benefit: Improved damping, grip, and stability over OE units
• Construction: Rigorously tested to meet or exceed OE quality standards

Fits select 1999-2005 Porsche 911 (996) models including Carrera, Carrera 4, Targa, and 40th Anniversary Edition.

The Bilstein B8 Performance Plus front strut assembly is a high-performance damper upgrade engineered specifically to be paired with aftermarket lowering springs. Unlike standard shocks, these dampers feature shortened piston rods and application-specific valve settings to maintain proper suspension travel and optimize the handling characteristics of a lowered chassis.

Built with Bilstein’s signature monotube pressure technology, this strut delivers consistent, fade-free performance while maintaining a sporty yet comfortable ride. Each unit is rigorously tested to meet or exceed OE quality standards, ensuring a precise fit that bolts directly to factory mounting points. Whether you are refreshing a production sport suspension or installing a new set of lowering springs, the B8 series provides the damping control required for enhanced safety and vehicle dynamics.

• Manufacturer Part Number: 22-046130
• Design: Monotube high-pressure gas technology
• Optimized for use with lowering spring sets and sport suspensions
• Vehicle-specific ride tuning for the 996 chassis
• Direct replacement for OE dampers

Fits 1999-2005 Porsche 911 (996) Carrera, Carrera 4, Targa, and 40th Anniversary Edition models.

Bilstein B6 Performance dampers are the ideal upgrade for drivers seeking improved handling and vehicle stability without changing the factory ride height. These struts are specifically engineered to be paired with your Porsche's original equipment (OE) factory springs, providing a significant performance increase while maintaining the vehicle's intended suspension geometry. Each strut features application-specific valve settings to optimize grip and lane stability for both daily driving and spirited performance use.

• Improved Dynamics: Enhanced lane stability and road contact in extreme driving situations.
• OE Spring Compatible: Designed as a direct performance upgrade for use with series production springs.
• Gas-Pressure Technology: Features Bilstein's signature gas-pressure design for consistent, fade-free damping performance.
• Vehicle-Specific Tuning: Rigorously tested and tuned for the unique chassis dynamics of the Porsche 996 platform.
• Installation: Direct bolt-on replacement for the factory front strut assembly.

• Manufacturer Part Number: 22-046123
• Series: B6 Performance
• Position: Front
• Internal Design: Twintube

Fits select 1998-2010 Volkswagen Beetle, Golf, and Jetta models (1.8T).

The Bilstein B4 series OE Replacement damper is engineered to restore your vehicle’s original ride quality and handling performance. As a twin-tube gas pressure strut, it is designed to meet or exceed original equipment standards, providing a seamless replacement for worn factory components. This strut assembly ensures consistent damping and precise construction, maintaining the safety and comfort profiles originally intended by Volkswagen engineers.

• Gas pressure twin-tube design for consistent performance
• Restores original driving comfort and handling characteristics
• Engineered to meet or exceed OE quality standards
• High power reserves for maximum safety and stability
• Manufacturer Part Number: 22-045751

Fits 1998-2010 Volkswagen Beetle, Golf, and Jetta models (1.8T).

Bilstein B4 OE Replacement dampers are specifically engineered to restore the original ride quality, handling, and safety of your vehicle. Designed to meet or exceed OE standards, these twintube struts are the ideal choice for drivers looking to maintain factory-fresh performance with the added reliability of Bilstein's precision engineering. The B4 series provides high power reserves to ensure maximum control and stability across all driving conditions.

• Restores original driving comfort and precise handling
• High power reserves for maximum safety and control
• Gas-pressure twintube construction for consistent performance
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: 22-045744

Fits select 1984-1995 Mercedes-Benz 190D, 190E, 260E, 300CE, 300D, 300E, 300TD, and E320.

The Bilstein B8 Performance Plus damper is a performance upgrade for original equipment dampers, specifically engineered to be paired with aftermarket lowering springs. These struts feature shortened piston rods to ensure proper spring preload and optimal travel, making them the ideal solution for vehicles with a reduced ride height.

Each damper utilizes application-specific valve settings and a monotube design to provide superior handling performance and chassis control. Rigorously tested to meet or exceed OE quality standards, the B8 Performance Plus series delivers a sportier feel and improved steering response while maintaining essential ride comfort.

• Optimized for use with lowering spring sets and production sport suspensions
• Monotube design for consistent, fade-free performance and heat dissipation
• Enhanced safety and stability during spirited driving
• Vehicle-specific ride tuning for precise suspension geometry
• Direct bolt-on replacement for factory front struts
• Manufacturer Part Number: 22-003652

Fits select 1984-1995 Volvo 740, 760, 780, 940, and 960 models.

The Bilstein B4 OE Replacement strut insert is specifically engineered to restore the original ride quality, handling, and safety of your Volvo. These dampers are designed to meet or exceed original equipment standards, providing a precise fit and restoring the factory-intended performance that has worn out over time. Built with a twintube internal design, they offer consistent damping and high power reserves to ensure stability and comfort across various driving conditions.

• Twintube internal design for consistent suspension performance
• Engineered to restore original driving comfort and safety
• Maintains factory handling characteristics
• High-quality construction meets or exceeds OE standards
• Direct replacement for worn factory front strut inserts
• Manufacturer Part Number: 21-030543

Fits select 1982-1989 BMW 5-Series and 6-Series models (528e, 533i, 535i, 535is, 633CSi, and 635CSi).

The Bilstein B4 OE Replacement strut insert is specifically engineered to restore your vehicle's original ride quality, handling, and safety. Designed as a direct-fit replacement for the factory front dampers, this twintube gas-pressure insert provides consistent performance and high power reserves to ensure maximum stability. Whether you are refreshing a daily driver or restoring a classic BMW chassis, the B4 series offers the world-famous Bilstein quality required to meet or exceed original equipment standards.

• Restores original driving comfort and precise handling characteristics
• Twintube gas-pressure construction for reliable damping performance
• High OE quality standards for a perfect fit in the factory housing
• Engineered for the 1982-1989 BMW E28 and E24 platforms
• Manufacturer Part Number: 21-030512

Fits select 1984-1993 BMW 318i, 318is, 325e, 325es, 325i, and 325is models.

The Bilstein B4 OE Replacement strut insert is engineered to restore the original ride quality and handling characteristics of your BMW. These twintube dampers are designed to meet or exceed original equipment standards, making them the ideal choice for drivers looking to refresh a worn suspension with the same precision and safety provided by the factory.

Each damper is built with high power reserves to maintain control and comfort under diverse driving conditions. As a direct-fit component, this strut insert replaces the internal factory damping unit within the original housing, providing world-famous Bilstein quality in an OE-equivalent package.

• Restores original driving comfort, handling, and safety profiles
• Engineered with high power reserves for maximum safety and control
• Precise twintube construction for consistent performance
• Designed to meet or exceed high OE quality standards
• Direct-fit front strut insert (replaces internal component)
• Manufacturer Part Number: 21-030505

Fits select 1975-1993 Volvo 240, 242, 244, 245, 262, 264, and 265 models.

The Bilstein B4 OE Replacement strut insert is specifically engineered to restore the original ride quality, handling, and safety of your Volvo. These dampers are the ideal choice for drivers looking to maintain factory performance standards while benefiting from Bilstein's world-renowned precision and durability. Utilizing a twintube design, these inserts provide consistent damping characteristics and high power reserves to ensure maximum stability under various driving conditions.

• Series: B4 OE Replacement
• Part Type: Strut Insert
• Internal Design: Twintube
• Manufacturer Part Number: 21-030314
• Position: Front
• Build Quality: Meets or exceeds original equipment (OE) standards

Designed as a direct-fit replacement for worn factory units, this strut insert installs into the factory housing to revitalize your vehicle's suspension system, restoring original driving comfort and precise handling response.

Fits 2013-2018 Audi S6 and S7 models equipped with electronic suspension.

The Bilstein B4 OE Replacement DampTronic shock absorber is a precision-engineered direct replacement for the active dampers found on high-performance Audi models. Designed to integrate seamlessly with the vehicle's factory electronic adjustment system, this rear shock restores the original damping characteristics, ride comfort, and handling precision without requiring modifications.

• Manufacturer Part Number: 20-264765
• Position: Rear
• Series: B4 OE Replacement (DampTronic)
• Compatibility: Maintains full functionality of factory electronic damping controls
• Quality: Meets or exceeds original equipment standards for safety and power reserves
• Construction: High-pressure gas technology for consistent, fade-free performance

Fits select 2015-2021 Volkswagen GTI and Golf R models. The Bilstein B6 Performance (DampTronic) rear shock absorber is a direct-fit performance upgrade for vehicles equipped with factory electronic suspension systems. These dampers are engineered to work specifically with your OE factory springs, providing enhanced handling and safety while maintaining the original ride height.

The B6 DampTronic series is designed to integrate seamlessly with the vehicle's factory electronic damping control. By retaining the original wiring and controls, you maintain the ability to switch between comfort and sport settings instantly. Each unit is rigorously tested to meet or exceed OE standards, featuring application-specific valving to optimize the handling characteristics of the MQB platform.

• Retains all active features of the factory electronic suspension system
• Plug-and-play installation with OE factory controls
• Significant improvement in handling and vehicle stability
• Application-specific valve settings for precision damping
• Designed for use with original factory springs
• Gas-pressure twintube construction for consistent performance
• Manufacturer Part Number: 20-254353

Fits select 2012-2021 BMW 2, 3, and 4 Series models including 228i, 230i, 328d/i, 330i, 335i, 340i, 428i, 430i, 435i, 440i, and M235i/M240i.

The Bilstein B6 DampTronic shock absorber is engineered specifically for vehicles equipped with factory electronic suspension systems. This rear twintube damper provides a marked improvement in handling and safety without sacrificing the convenience of your BMW's original cockpit-adjustable settings. By integrating directly with the OE control unit, the DampTronic series allows for rapid switching between comfort and sport modes while delivering superior damping performance compared to the original equipment.

• Manufacturer Part Number: 20-250744
• Series: B6 DampTronic
• Position: Rear
• Design: Twintube Gas Pressure
• Directly compatible with BMW series-production electronic adjustment systems
• Vehicle-specific ride tuning for optimized performance
• Designed to work with factory springs

Fits 1992-1995 Chevrolet Corvette ZR-1.

The Bilstein B6 Performance damper is a high-pressure gas monotube shock designed to upgrade your vehicle's handling while retaining the factory coil springs. Specifically valved for the C4 Corvette ZR-1, these dampers provide a significant improvement in lane stability and grip without the harshness often associated with performance suspension upgrades. The monotube design allows for a larger piston surface area, delivering more precise damping control and better heat dissipation during spirited driving.

• Monotube gas-pressure technology ensures consistent, fade-free performance
• Large 46mm piston diameter for enhanced damping sensitivity and vehicle control
• Application-specific valving tuned for the unique dynamics of the ZR-1 chassis
• Direct bolt-on replacement for factory front dampers
• Engineered to work seamlessly with original equipment springs

Manufacturer Part Number: 20-070274

Fits 1990-1991 Chevrolet Corvette ZR-1.

Bilstein B6 Performance dampers are a precision-engineered upgrade for the factory suspension system, specifically valved to be paired with original equipment springs. These 46mm monotube gas-pressure shocks provide consistent, fade-free performance by dissipating heat more efficiently than traditional twin-tube designs. By utilizing vehicle-specific ride tuning, the B6 series enhances lane stability and grip during both daily driving and spirited maneuvers without requiring the installation of lowering springs.

• Gas-pressure monotube technology for instantaneous damping response
• 46mm piston diameter provides superior control and durability
• Application-specific valving optimized for the Corvette ZR-1 chassis
• Compatible with factory series springs for a direct-replacement installation
• Rigorous testing ensures performance meets or exceeds OE standards
• Manufacturer Part Number: 20-070007

Fits select 2000-2006 Cadillac Escalade ESV and EXT, Chevrolet Avalanche 1500 and Suburban 1500, and GMC Yukon XL 1500.

Bilstein B3 OE Replacement coil springs are engineered to restore your vehicle's original ride height, safety, and handling characteristics. These springs are manufactured to mirror factory dimensions and spring rates, utilizing specific technical designs such as pigtail ends, minibloc shapes, or central force designs where required. By replacing worn or sagging original equipment, these springs return your suspension system to its intended factory specifications.

• Manufactured from high-quality chrome vanadium or chrome silicon steel for superior break resistance
• Hot setting process after forming effectively prevents future height loss and sagging
• Technical designs include pigtail ends, minibloc shapes, and central force design to match OE specifications
• Durable blue powdercoat finish for long-lasting corrosion resistance
• Manufacturer Part Number: 199020

Fits 2020-2023 Mercedes-Benz GLE350 (Base and 4Matic) with standard suspension.

The Bilstein B4 OE Replacement damper is engineered to restore the original ride quality, handling, and safety of your vehicle. Designed to meet or exceed original equipment standards, these dampers are the ideal choice for maintaining the factory performance of your Mercedes-Benz. This rear left shock absorber provides the high power reserves necessary for consistent damping performance across various driving conditions.

• Restores factory driving comfort and handling characteristics
• Maintains high power reserves for maximum safety and stability
• Built to high OE quality standards for a direct-fit installation
• Designed for models with standard (non-air/non-electronic) suspension
• Position: Rear Left
• Manufacturer Part Number: 19-400044

Fits select 2023-2025 BMW X1 and Mini Countryman models including xDrive28i, John Cooper Works ALL4, and SE ALL4.

The Bilstein B4 OE Replacement shock absorber (19-347639) is engineered to restore your vehicle's factory damping performance and ride comfort. Specifically designed for models with standard suspension, this twintube gas-pressure damper meets or exceeds original equipment standards, providing a cost-effective solution for worn-out factory shocks without compromising safety or handling.

• MPN: 19-347639
• Design: Twintube gas pressure technology for consistent damping performance
• Application: Rear position replacement for standard suspension systems
• OE Quality: Engineered to match the exact valving and specifications of the original damper
• Reliability: High power reserves ensure maximum safety and control in all driving conditions

Whether you are replacing a leaking rear shock or looking to regain the precise handling of a new vehicle, the Bilstein B4 series provides the durability and world-famous quality required for modern BMW and Mini chassis.

Fits 2020-2026 Mercedes-Benz GLS450 and GLS580 4Matic models without Adaptive Control Suspension.

The Bilstein B4 OE Replacement series is the definitive choice for restoring your vehicle's original ride characteristics. These dampers are precision-engineered to meet or exceed Mercedes-Benz factory standards, providing the same damping force and handling response as the day your GLS-Class left the showroom. Built with Bilstein's gas-pressure technology, this rear right shock ensures consistent performance and high power reserves for maximum safety.

• Direct-fit OE replacement for the rear right damper
• Specifically tuned for vehicles without Adaptive Control Suspension
• Restores original driving comfort and handling stability
• Maintains consistent damping performance under varying road conditions
• High power reserves for maximum safety
• Manufacturer Part Number: 19-332017

Fits 2020-2026 Mercedes-Benz GLS450 4Matic and GLS580 4Matic (without Adaptive Control Suspension).

The Bilstein B4 OE Replacement damper is engineered to restore the original ride quality and handling performance of your Mercedes-Benz. These dampers are designed to meet or exceed OE standards, providing the precise comfort and safety characteristics your vehicle had when it left the factory. Built for drivers looking to maintain factory performance, the B4 series utilizes world-famous Bilstein gas-pressure technology to ensure consistent damping even under high-load situations.

• Restores original driving comfort, handling precision, and safety
• Direct-fit OE replacement for the rear left position
• High power reserves for maximum stability and control
• Engineered for vehicles without Adaptive Control Suspension
• Manufacturer Part Number: 19-332000