Fits select 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (2-door and 4-door models).

Maintain the structural integrity of your cargo setup with the Body Armor 4x4 replacement frame kit. Designed as a direct service part for the Wrangler JK roof rack system, this front and rear frame kit restores the strength and security required for heavy off-road gear. Whether you are replacing damaged components or refreshing an older rack, this kit ensures a precise fit to the factory mounting points of your JK platform.

Built to withstand the elements, each component features a heavy-duty two-stage light textured black powder coat finish. This multi-layered coating provides superior resistance against corrosion, trail debris, and UV exposure. Body Armor 4x4 stands behind this kit with a dedicated finish warranty and a limited lifetime structural warranty, giving you confidence on every expedition.

• Fits both 2-door and 4-door Jeep Wrangler JK configurations
• Heavy-duty construction with two-stage light textured black powder coat
• Direct replacement for front and rear rack frame components
• Includes necessary hardware for frame kit installation
• Manufacturer Part Number: JK-711
• Warranty: 3-year finish warranty / Limited lifetime structural warranty

Fits 2007-2018 Jeep Wrangler and Wrangler JK Unlimited 4-Door models.

The Body Armor 4x4 JK-7100 Cargo Roof Rack is a heavy-duty overlanding solution built from 2-inch diameter .120-wall steel tubing. This robust framework features a four-crossbar design compatible with most aftermarket rooftop accessories, providing a high-capacity platform for gear. For maximum versatility, the crossbars are removable to allow easy access to your soft or hard top without dismantling the entire rack. The assembly is protected by a durable two-stage light textured black powder coat finish for long-lasting corrosion resistance.

• Dynamic Load Rating: 350 lbs
• Static Load Rating: 700 lbs
• Construction: 2-inch .120 wall steel tube
• Integrated Lighting: 4 front light tabs and 2 rear light tabs
• Installation: Simple bolt-on with Body Armor 4x4 bumpers (fits factory bumpers with slight modifications)
• Finish: 2-stage light textured black powder coat
• Warranty: 3-year finish and limited lifetime warranty
• Manufacturer Part Number: JK-7100

Fits 2007-2018 Jeep Wrangler JK Unlimited models.

Body Armor 4x4 rear tube doors provide the open-air experience of a doorless Jeep while maintaining containment and style on the trail. Built from 2-inch steel tubing, these doors are engineered to enhance trail visibility and withstand off-road use. The dual-process heavy texture black powder coat finish ensures long-lasting durability and corrosion resistance against the elements.

These doors feature an internal latch mechanism and an adjustable latch design for precise alignment with your factory door strikers, ensuring a secure closure. To maintain a quiet ride, they include integrated anti-rattle bump stops and door limit straps. The door height is specifically engineered for comfort, and the built-in brackets are designed to accommodate Body Armor 4x4 trail mirrors (PN: 5126).

• Heavy-duty 2-inch steel tube construction
• Dual-process heavy texture black powder coat finish
• Internal latch mechanism with adjustable alignment
• Includes anti-rattle bump stops and door limit straps
• Integrated mirror brackets (compatible with PN: 5126)
• Manufacturer Part Number: JK-6155

Fits 2007-2018 Jeep Wrangler and Wrangler Unlimited JK models.

Body Armor 4x4 Front Tube Doors provide an authentic open-air trail experience while maintaining a secure boundary for the passenger cabin. Constructed from heavy-duty 2-inch steel tubing, these doors significantly improve visibility of the terrain and trail obstacles. The dual-process heavy texture black powder coat finish is engineered for superior corrosion resistance and a rugged appearance that matches factory trim.

Each door is equipped with an internal latch mechanism and an adjustable latch plate, allowing for precise alignment to the factory door striker to eliminate vibration. To further ensure a quiet ride, these doors include anti-rattle bump stops and door limit straps. The door height is specifically engineered for ergonomic comfort, providing a natural armrest position during long days on the trail. Integrated brackets are built to accommodate Body Armor 4x4 Trail Mirrors (PN: 5126).

• Durable 2-inch steel tube construction
• Internal latch mechanism with adjustable striker alignment
• Integrated anti-rattle bump stops and door limit straps
• Dual-process heavy texture black powder coat finish
• Mirror brackets designed for Trail Mirrors (PN: 5126)
• Direct bolt-on installation to factory hinges
• Manufacturer Part Number: JK-6154

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, X, and Anniversary editions.

Experience the open trail with the Gen 3 Body Armor 4x4 Trail Doors. Engineered to replace your factory doors, these front trail doors provide maximum visibility and airflow while maintaining a secure, rugged cabin feel. Built from heavy-duty steel tube and plate construction, they are designed to withstand the rigors of off-roading while protecting your vehicle's interior.

These doors feature a dual-stage locking latch mechanism for a secure close and integrated anti-rattle bump stops to ensure a quiet ride across uneven terrain. Installation is straightforward with adjustable hinges and a latch plate that align with factory mounting points. The doors come finished in a durable two-stage light texture black powder coat for superior corrosion resistance and include nylon webbing with padded armrests for added comfort during long days on the trail.

• Heavy-duty steel tube and plate construction
• Durable two-stage light texture black powder coat finish
• Dual-stage locking latch mechanism for enhanced security
• Adjustable hinges and latch plate for precise fitment
• Integrated anti-rattle bump stops
• Included nylon webbing with padded armrests
• Sold as a front pair
• Manufacturer Part Number: JK-6139

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited (Rubicon, Sahara, Sport, and X models).

The Body Armor 4x4 JK-6126 Windshield Light Bar is a heavy-duty mounting solution for adding auxiliary off-road lighting to your vehicle. Constructed from high-strength tubular steel, this bar provides a stable overhead platform designed to withstand the rigors of the trail. It features four integrated mounting tabs, offering versatile options for positioning spot or flood lights. The bar is finished in a dual-process black powder coat for superior corrosion resistance and a clean, resilient appearance. The bolt-on design allows for a straightforward installation process using factory mounting points.

• Heavy-duty tubular steel construction for maximum durability
• Four integrated light tabs for auxiliary lighting configurations
• Dual-process black powder coat finish resists corrosion and fading
• Simple bolt-on installation with no specialized tools required
• Manufacturer Part Number: JK-6126

Fits select 2007-2018 Jeep Wrangler JK and JK Unlimited models (2-Door and 4-Door) across all trim levels including Rubicon, Sahara, Sport, and X.

The Body Armor 4x4 JK-6121 Roof Rack Mounting Kit provides a secure, vehicle-specific foundation for installing the 5160 series roof rack. Engineered for a precise fit on the JK platform, these brackets utilize high-strength construction to manage off-road vibrations and cargo loads. The system is finished in a durable two-stage light texture powder coat, providing superior corrosion resistance against the elements.

• Specifically designed to mount the Body Armor 4x4 5160 Rack
• Compatible with both 2-door and 4-door 2007-2018 Jeep Wrangler JK models
• Weight capacity rated at 150 lbs for secure gear transport
• Two-stage light texture powder coat finish for long-lasting durability
• Manufacturer Part Number: JK-6121

Fits select 1987-2018 Jeep Wrangler YJ, TJ, JK, and JK Unlimited.

The Body Armor 4x4 Elevated Third Brake Light (MPN: JK-5120) is an essential safety upgrade for Jeeps equipped with oversized spare tires. Standard third brake lights are often obscured when upgrading to larger rubber; this bracket solves that issue by relocating the light to a higher position, ensuring visibility over spare tires up to 37 inches in diameter.

Built for durability and ease of installation, the bracket is designed to bolt directly into the existing factory mounting holes on the tailgate. This eliminates the need for drilling or permanent body modifications. The assembly includes a high-output DOT-compliant LED light to maintain road legality and enhance signaling clarity on and off the trail.

• Provides visibility over spare tires up to 37 inches
• Direct bolt-on installation using factory tailgate mounting points
• Includes high-visibility DOT-compliant LED light
• Fits 1987-1995 YJ, 1997-2006 TJ, and 2007-2018 JK/JKU models
• Manufacturer Part Number: JK-5120

Fits select 2007-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The Body Armor 4x4 Eco Series Rear Bumper (GM-2961) is a functional upgrade designed for owners who need increased durability without losing factory utility. Fabricated from 1/8-inch steel plate, this bumper provides a rugged alternative to the OE unit while retaining the factory tow hitch. It features built-in corner step pockets to improve access to the truck bed and includes mounting provisions for up to four cube LED lights. This bumper is fully compatible with factory backup sensors, ensuring your vehicle's safety systems remain functional after installation.

• Manufactured from heavy-duty 1/8-inch steel plate
• Retains factory tow hitch for seamless towing integration
• Integrated step pockets for easy truck bed access
• OE sensor compatible for continued use of parking aids
• Light fitment: Mounting points for four cube LED lights
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: GM-2961

Fits 2019-2022 Chevrolet Silverado 1500 Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV, WT, and ZR2. This Body Armor 4x4 Ambush Series front bumper (MPN: GM-19344) provides a rugged, low-profile alternative to factory bumpers without the weight or bulk of a winch-ready unit.

Constructed from a combination of 3/16-inch and 1/4-inch cold roll steel, this bumper is engineered for heavy-duty protection. It features a two-stage light texture black powder coat finish for superior corrosion resistance. Designed as a direct bolt-on replacement, it maintains full OE parking sensor compatibility to preserve factory safety features.

• Material: 3/16" and 1/4" cold roll steel construction
• Recovery Points: Two integrated, welded D-ring mounts
• Lighting Compatibility: Center mount for 30" dual-row LED light bar and side mounts for two cube LEDs
• Finish: Two-stage light texture black powder coat
• Installation: Bolt-on design; no welding required
• Diesel Note: Intercooler shroud (PN: GM-5966) required for diesel engines; optional for gas engines

Fits 2014-2015 Chevrolet Silverado 1500 (High Country, LS, LT, LTZ, SSV, and WT).

The Body Armor 4x4 Eco Series Front Bumper (GM-19335) is engineered for Silverado owners seeking an aggressive aesthetic and improved protection without the excessive weight of a traditional winch bumper. Fabricated from 1/8-inch thick steel plate, this bumper provides a rugged look and durable front-end shielding while maintaining factory-level fit and finish.

This bumper is designed for a direct bolt-on installation to factory mounting points. It is fully compatible with OE parking sensors and includes a dedicated license plate bracket. To enhance night-time visibility, the Eco Series bumper features integrated mounts for a 20-inch dual-row LED light bar in the center and four cube LED pods in the wings.

• Constructed from 1/8" thick steel plate for high strength and low weight
• Pre-cut fitments for one 20" dual-row LED bar and four cube LEDs
• Full compatibility with factory OE parking sensors
• Simple bolt-on installation; no drilling required
• Non-winch capable design for streamlined profile
• Includes license plate relocation bracket
• Manufacturer Part Number: GM-19335

Fits 2017-2022 Ford F-250 and F-350 Super Duty (All Trims).

The Body Armor 4x4 Ambush XT Series front bumper is engineered to provide uncompromising front-end protection while maintaining the advanced technology of your Super Duty. This one-piece wrap-around bumper shields your grille and headlights with a 2-inch main tube and 1.25-inch to 1.50-inch supporting tubes. Unlike many aftermarket bumpers, the FD-20341 is specifically designed to retain your factory front camera and Adaptive Cruise Control (ACC) sensor functionality for seamless integration.

• Constructed from heavy-duty 3/16-inch and 1/4-inch cold-roll steel for maximum durability.
• Finished in a two-stage light texture black powder coat for long-lasting corrosion resistance.
• Integrated 2-inch receiver hitch and heavy-duty shackle recovery mounts for utility.
• Steel mesh screen allows maximum airflow to vital cooling components while blocking debris.
• Pre-cut mounts for one 30-inch dual-row LED light bar and four LED cubes.
• Direct bolt-on installation using factory mounting points; not winch compatible.
• Includes a 3-year finish warranty and limited lifetime structural warranty.

Fits 2021-2024 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, and Wildtrak).

The Body Armor 4x4 Odyssey Series Front Bumper (FB-19534) provides an aggressive, functional upgrade for the 6th-gen Ford Bronco. Engineered for the trail, this 2-in-1 style bumper is constructed from heavy-duty 3/16-inch and 1/4-inch steel to handle rigorous off-road use while improving approach and departure angles. It features a durable two-stage light texture black powder coat finish to resist corrosion and wear.

This bumper is a true bolt-on solution that requires no drilling for installation. It is designed to work seamlessly with O.E. parking sensors and does not require the relocation of the Adaptive Cruise Control (ACC) module. For recovery and lighting, it includes integrated shackle mounts, a 12,000 lbs winch capacity plate, and versatile light mounting options.

• Heavy-duty 3/16" and 1/4" steel construction
• 12,000 lbs winch capacity (compatible with most standard winches)
• Compatible with 18" single row or 20" double row LED light bars and two cube LEDs
• Maintains functionality of O.E. parking sensors
• Integrated shackle recovery mounts
• Includes both low-profile and high-profile hoops and a skid plate
• No-drill, bolt-on installation with no ACC relocation required
• MPN: FB-19534
• Warranty: 3-year finish / Limited lifetime

Fits select 2019-2024 Ram 2500 and 3500 heavy-duty trucks across all major trims including Tradesman, Laramie, and Power Wagon.

The Body Armor 4x4 Ambush XT Front Bumper is engineered for truck owners seeking a modern, low-profile look without sacrificing front-end protection. This one-piece wrap-around bumper is designed to contour precisely with the Ram's factory body lines, providing enhanced clearance for larger tires and off-road obstacles while protecting the grille and headlights. Built from heavy-duty 3/16" and 1/4" cold roll steel with 2" main tubing and 1.25" to 1.50" support tubes, it provides a rigid barrier against trail hazards. The integrated mesh screen ensures maximum airflow reaches your radiator and intercooler.

This bumper is OE sensor compatible, allowing you to maintain factory safety features, and includes a skid plate for additional underbody protection. The design features integrated mounting points for a 30" dual-row LED bar and two cube LEDs for superior visibility. For recovery and utility, it features an integrated 2" receiver and heavy-duty shackle mounts. Installation is a straightforward bolt-on process with no welding required.

• Manufacturer Part Number: DG-20339
• Construction: 3/16" and 1/4" cold roll steel
• Tubing: 2" main tube with 1.25"-1.50" support tubes
• Finish: Two-stage light texture black powder coat
• Lighting Compatibility: Fits 30" dual-row LED bar and 2 cube LEDs
• Recovery: Integrated 2" receiver and shackle recovery mounts
• Features: Includes skid plate and mesh airflow screen
• Compatibility: OE sensor compatible; non-winch design
• Warranty: 3-year finish warranty / Limited lifetime structural

Fits select 2010-2018 Dodge and Ram 2500/3500 heavy-duty trucks across all trim levels including Power Wagon, Laramie, and Tradesman.

The Body Armor 4x4 Ambush XT Front Bumper (DG-20338) provides heavy-duty protection with a sleek, low-profile aesthetic. Constructed from 3/16" and 1/4" cold-rolled steel, this one-piece wrap-around bumper is designed to shield your grille and headlights while maintaining maximum ground clearance. The center mesh screen allows for optimal airflow to the radiator and intercooler, ensuring your HD truck remains cool under load.

This bumper is highly functional for both work and trail use, featuring an integrated 2" receiver for accessories and shackle recovery mounts. For nighttime visibility, it includes mounting points for a 30" dual-row LED bar and two cube LEDs. The system is fully OE sensor compatible and includes a dedicated skid plate for lower-end protection.

• Manufacturer Part Number: DG-20338
• Material: 3/16" and 1/4" cold-rolled steel plate with 2" main tubing
• Supporting Tubes: 1.25"-1.50" diameter
• Finish: Two-stage light texture black powder coat
• Lighting Compatibility: Fits one 30" dual-row LED bar and two cube LEDs
• Installation: Easy bolt-on design with no drilling required
• Features: Integrated 2" receiver, shackle mounts, and mesh screen
• Warranty: 3-year finish / limited lifetime structural

Fits select 2007-2024 Jeep Wrangler and Wrangler JK models.

The Body Armor 4x4 Hinge Steps provide a rugged and reliable solution for accessing roof racks, loading gear, or cleaning the top of your vehicle. Designed to bolt directly to the factory door hinges, these steps offer a stable platform without requiring any drilling or permanent alterations to your vehicle. When not in use, the steps fold away to maintain a clean profile.

Each step is laser-cut from high-strength 1/8-inch steel plate and protected by a two-stage light texture powder coat finish for long-lasting durability against corrosion and the elements. The non-slip serrated step pads provide confident footing, even in wet or muddy conditions. To ensure your vehicle's exterior remains pristine, the kit includes integrated rubber pads that protect the paint at the mounting points, preventing metal-on-metal contact.

• High-strength 1/8-inch steel plate construction
• Durable two-stage light texture powder coat finish
• Non-slip serrated step pads for superior traction and safety
• 350 lb load capacity limit per step
• Simple no-drill installation to factory hinge mounting points
• Includes new hardware and paint-protecting rubber pads
• Manufacturer Part Number: 5146

The Body Armor 4x4 Mega D-Ring is a high-strength recovery point designed for serious off-road use. CNC-machined from 6061-T6 billet aluminum, this shackle provides an exceptional 18,000 lbs capacity, ensuring it can handle heavy-duty vehicle recoveries and towing tasks. The reversible design offers aesthetic flexibility, allowing you to display a smooth, clean finish or a more rugged look with decorative bolts.

Built for durability in harsh environments, this Mega D-Ring features a light texture machined silver finish and includes a 7/8-inch stainless steel pin for superior corrosion resistance and load-bearing reliability. Whether you are outfitting a bumper or a recovery hitch, this component provides the strength and versatility required for the trail.

• Precision-machined from 6061-T6 billet aluminum
• 18,000 lbs load capacity for heavy-duty recovery
• Includes 7/8" stainless steel pin for high-strength connection
• Reversible design for smooth or decorative bolt appearance
• Durable light texture silver finish
• Sold individually
• Manufacturer Part Number: 5141-M

The Body Armor 4x4 Mega D-Ring (MPN 5141-B) is a heavy-duty recovery shackle engineered for high-tension off-road utility. Precision-machined from 6061-T6 billet aluminum, this component offers superior strength without the weight of traditional cast steel. It features a robust 7/8" stainless steel pin to ensure secure attachment points for winch lines and recovery straps during vehicle extractions.

This Mega D-Ring features a unique reversible design, giving you the choice between a clean, smooth aesthetic or a rugged look with exposed decorative bolts. The assembly is finished in a durable light texture black powder coat to provide long-lasting corrosion resistance and protection against the elements.

• CNC-machined from 6061-T6 billet aluminum for maximum durability
• Includes a 7/8" stainless steel pin for secure recovery operations
• 18,000 lbs. load capacity rated for heavy-duty tasks
• Reversible design offers smooth or decorative bolt styling options
• Durable light texture black finish protects against corrosion
• Sold as a single unit (Part Number: 5141-B)

The Body Armor 4x4 Backbone Hitch Skid (5136) provides critical rear-end protection for off-road and utility use. Designed to slide into a standard receiver, this multi-functional component acts as a skid plate to protect your hitch and rear bumper from impacts and scrapes during steep departures. It also features an integrated shield to safeguard sensitive trailer wiring from trail debris and snagging.

Beyond protection, the Backbone serves as a wide, non-slip step for easier access to roof racks or truck beds and includes a reinforced recovery point for use with recovery straps. The assembly is finished in a durable black E-coat for long-term corrosion resistance and requires no tools for a quick, secure installation.

• Protection: Shields the hitch, rear bumper, and trailer wiring connectors from impact.
• Functionality: Integrated non-slip step surface and recovery point.
• Finish: Corrosion-resistant black E-coat for durability in harsh environments.
• Installation: Tool-free design slides directly into standard hitch receivers.
• Part Number: 5136

Improve visibility and maintain safety when running tube doors with the Body Armor 4x4 Trail Door Mirror Set. Specifically engineered to bolt directly to Body Armor 4x4 Trail Doors, this kit provides a stable, adjustable viewing solution for off-road environments. The set includes mirrors for both the driver and passenger sides, featuring a multi-position design that allows for precise adjustment based on driver preference and seating position.

Constructed for long-term durability on the trail, these mirrors are supplied with high-grade stainless steel hardware to resist corrosion and ensure a secure mount. Whether you are navigating tight technical sections or transitioning back to the pavement, these mirrors offer the necessary field of vision to keep your surroundings in sight.

• Designed exclusively for installation on Body Armor 4x4 Trail Doors
• Includes mirrors for both driver and passenger sides
• Supplied with corrosion-resistant stainless steel mounting hardware
• Multi-position adjustable design for optimized field of view
• Manufacturer Part Number: 5126

Fits select 2007-2024 Chevrolet Silverado 1500, Tahoe, Suburban 1500, Avalanche, and GMC Sierra 1500, Yukon XL 1500.

Level your vehicle's stance and make room for larger wheels and tires with the Body Armor 4x4 2-inch strut spacer. This kit is engineered to provide a clean 2-inch lift to the front suspension without compromising the factory ride quality. Designed as a direct bolt-on solution, these spacers install easily to the factory mounting points and allow you to return the vehicle to stock settings if necessary.

Each spacer is protected by a durable powdercoat finish to withstand road debris and harsh weather conditions, ensuring long-term corrosion resistance. This is an ideal solution for owners looking to improve their truck or SUV's ground clearance and aesthetic without the complexity of a full suspension overhaul.

• Lift Height: 2 inches
• Finish: Durable black powdercoat
• Installation: Direct bolt-on; no permanent modifications required
• Compatibility: Replaces factory hardware to level front-end rake
• Maintains OE ride quality and suspension geometry
• Manufacturer Part Number: 50508-GM
• Warranty: Protected by Body Armor 4x4 Armor Guard Warranty

Technical Note: Not compatible with vehicles equipped with Magnaride suspension.

Fits 2004-2008 Ford F-150 2WD/4WD models (Excludes Raptor).

Level your truck's stance and clear larger tires with the Body Armor 4x4 2.5-inch strut spacer. Engineered for a precise fit on 2004-2008 Ford F-150 chassis, this leveling kit provides the additional ground clearance needed for off-road use while maintaining the vehicle's factory ride quality. The direct bolt-on design allows for a straightforward installation that can be reversed if you ever need to return to stock height. Each spacer is finished in a durable powdercoat to resist corrosion and ensure long-term durability in harsh environments.

• Provides 2.5 inches of front lift for a level stance
• Direct bolt-on installation using factory mounting points
• Maintains original factory ride quality and comfort
• Durable powdercoat finish for maximum corrosion resistance
• Accommodates larger wheel and tire combinations
• Covered by the Body Armor 4x4 Armor Guard Warranty
• Manufacturer Part Number: 50507-FD

Fits 2020-2024 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD 4WD models.

Level the stance of your heavy-duty truck with the Body Armor 4x4 Torsion Key and Shock Extender Kit. This kit provides 1.5 to 2 inches of additional front-end ground clearance, allowing for larger wheel and tire combinations while maintaining the factory ride quality. Precision-engineered for durability, the keys are manufactured from 4140 forged steel to handle the high-stress loads of heavy-duty suspension systems.

The included shock extenders ensure your factory shocks remain within their proper operating range, preventing over-extension after the lift is installed. This bolt-on solution requires no permanent vehicle modifications and can be returned to the stock configuration if needed.

• Provides 1.5-inch to 2-inch front lift height
• Constructed from high-strength 4140 forged steel
• Includes shock extenders to maintain OE ride quality
• Simple bolt-on installation
• Fits 4WD models only
• Manufacturer Part Number: 504014-GM

Fits select 2011-2019 Chevrolet Silverado 2500 HD/3500 HD, Suburban 3500 HD, and GMC Sierra 2500 HD/3500 HD.

Level your heavy-duty truck while maintaining factory ride quality with the Body Armor 4x4 Torsion Key and Shock Extender Kit. This kit provides an adjustable 1 to 3 inches of additional front-end ground clearance, allowing for larger wheel and tire combinations without sacrificing comfort. Unlike standard cast keys, these components are forged from high-strength 4140 steel to withstand the heavy loads and stresses typical of 2500 and 3500 series chassis.

The included shock extenders are a critical addition, ensuring your factory shocks retain their intended range of motion even with the added lift height. This prevents shocks from topping out and maintains a smooth, controlled ride. Designed as a direct bolt-on solution, this kit requires no permanent modifications to the vehicle, allowing for a return to stock configuration if necessary.

• Adjustable 1-3 inch front lift for a leveled stance
• Forged from 4140 steel for superior durability over cast alternatives
• Included shock extenders preserve factory shock travel and ride quality
• Bolt-on installation requires no cutting or welding
• Manufacturer Part Number: 50401-GM

Fits select 2015-2022 Chevrolet Colorado and GMC Canyon models (2WD/4WD).

Level your mid-size truck with the Body Armor 4x4 2.5-inch Strut and Coil Spacer kit. This suspension solution is engineered to provide additional clearance for larger wheel and tire combinations without sacrificing the factory ride quality you rely on for daily driving. The spacers are finished in a durable powdercoat to resist corrosion and environmental wear, ensuring long-term performance in both on-road and off-road conditions.

Designed as a direct bolt-on upgrade, this kit requires no permanent modifications to your vehicle, making it easy to return to stock settings if needed. Each kit is backed by the Body Armor 4x4 Armor Guard Warranty for added peace of mind.

• Lift Height: 2.5 inches
• Installation: 100% Bolt-on; no cutting or welding required
• Finish: Durable black powdercoat
• Compatibility: Fits both 2WD and 4WD configurations
• Maintenance: Maintains factory ride quality and handling
• Manufacturer Part Number: 50307-GM

Fits 2013-2024 Ram 2500 and 2014-2024 Ram 3500 2WD/4WD models.

Level your heavy-duty truck's stance with the Body Armor 4x4 2.0-inch Coil Spacer and Shock Extension kit. This leveling solution provides the necessary clearance to accommodate larger wheel and tire packages without sacrificing the factory driving dynamics you rely on. By utilizing shock extensions, this kit preserves the original shock travel and maintains stock ride quality for a seamless transition from stock to lifted.

Built for durability in demanding environments, each component is finished in a rugged black powder coat to resist corrosion and road debris. The straightforward, bolt-on design allows for a clean installation using factory mounting points and offers the flexibility to return the vehicle to stock specifications if needed.

• Provides 2.0 inches of front lift for a leveled profile
• Includes shock extensions to maintain factory shock geometry and ride quality
• Accommodates larger aftermarket wheel and tire combinations
• Durable powder coat finish for long-lasting corrosion resistance
• 100% bolt-on installation with no permanent modifications required
• Protected by the Body Armor 4x4 Armor Guard Warranty
• Manufacturer Part Number: 50208-DG

Fits select 2005-2024 Ford F-250 and F-350 Super Duty 4WD trucks (excluding Tremor models).

Level your Super Duty's stance with the Body Armor 4x4 2.5-inch coil spacer and shock extension kit. This precision-engineered kit provides the necessary front-end clearance to accommodate larger wheel and tire combinations while maintaining factory ride quality. By utilizing shock extension brackets, this system ensures your original equipment shocks remain within their intended operating range. Each component is finished in a durable black powder coat for long-term corrosion resistance and durability in harsh environments.

• Provides 2.5 inches of front lift for a leveled vehicle profile
• Maintains factory ride quality and suspension geometry
• Includes shock extension brackets to preserve OE shock travel
• Durable black powder coat finish for maximum protection
• 100% bolt-on installation; no cutting or welding required
• Fully reversible to return the vehicle to stock settings
• Armor Guard Warranty protection
• Manufacturer Part Number: 50207-FD

The Body Armor 4x4 Blackout Series 20-inch LED light bar (MPN 40022) provides a powerful lighting solution with a stealthy, modern aesthetic. Featuring a double-row configuration, this bar utilizes a combo beam pattern that integrates both flood and spot optics to provide broad peripheral visibility alongside focused long-distance projection on the trail.

Engineered for durability in harsh off-road environments, the 40022 is housed in rugged die-cast aluminum with a blackout interior background. It is rated IP67 for water and dust resistance, ensuring reliable operation through mud, rain, or stream crossings. With a combined output of 120 watts producing 8400 raw lumens, it delivers high-intensity illumination while maintaining a low-profile look.

• Beam Pattern: Double-row combo (flood and spot)
• Performance: 120 Watts / 8400 Raw Lumens
• Construction: Die-cast aluminum housing with a black internal background
• Durability: IP67 waterproof and dustproof rating
• Installation: Includes mounting brackets and a complete wiring harness with an illuminated switch
• Part Number: 40022

Equip your rig for heavy-duty recovery with the Body Armor 4x4 3/4" D-ring shackle. Engineered for off-road durability, this shackle features a 4.75-ton pull rating to handle winching and snatch-strap duties with confidence. The threaded shaft design allows for secure, manual installation into standard bumper shackle tabs or recovery points.

To eliminate the common annoyance of metal-on-metal noise while driving, this shackle includes removable black rubber isolators that cushion the contact between the D-ring and your vehicle. The high-visibility red powder coat finish provides long-lasting corrosion resistance against the elements and trail debris.

• 3/4" D-ring shackle with 4.75-ton (9,500 lbs) pull rating
• Durable red powder coat finish with black isolators
• Isolators are removable and engineered to prevent rattle
• Precision threaded shaft for easy, reliable installation
• Sold individually as a single unit
• Manufacturer Part Number: 3204

Upgrade your recovery kit with the Body Armor 4x4 3/4" D-Ring Shackle (MPN 3203), engineered for heavy-duty towing and off-road recovery. This high-strength shackle features a 4.75-ton pull rating, providing the capacity needed for winching and kinetic recoveries. The threaded shaft design allows for straightforward installation into factory or aftermarket recovery points without the need for specialized tools.

Designed to eliminate the common annoyance of trail noise, this shackle comes equipped with removable red isolators. These components act as a buffer between the shackle and the bumper, preventing metal-on-metal rattling while protecting your vehicle's finish from impact damage. The assembly is protected by a textured black powder coat for long-lasting resistance against corrosion and abrasion.

• 3/4" D-Ring Shackle with threaded pin
• 4.75-ton pull rating for heavy-duty recovery
• Durable textured black powder coat finish
• Includes removable red anti-rattle isolators
• Manufacturer Part Number: 3203
• Sold individually