The BorgWarner AirWerks SX-E S300SX-E 8780 SuperCore Assembly (MPN 13009097055) is a high-performance turbocharger component designed for builders who require maximum airflow and durability. As a SuperCore configuration, this unit includes the complete compressor housing and a balanced center housing rotating assembly (CHRA), allowing for customized pairing with a variety of turbine housings (sold separately).

The S300SX-E 8780 is equipped with a Forged Milled Wheel (FMW) compressor and enhanced aerodynamics that provide a wider map range compared to standard S300 units. It features a heavy-duty 360-degree thrust bearing to handle the high axial loads found in high-boost applications. This assembly also includes an integrated speed sensor port and a pre-machined boost signal port for precise tuning and monitoring.

• Series: AirWerks SX-E (S300SX-E)
• Compressor Inducer: 69.00mm
• Turbine Wheel Outer Diameter: 80.00mm
• MPN: 13009097055
• Construction: Forged Milled Wheel (FMW) compressor technology
• Bearing Type: Heavy-duty 360-degree thrust bearing

The BorgWarner SX-E S300SX-E 8380 SuperCore assembly (MPN 13009097053) represents the pinnacle of the AirWerks performance line, engineered for high-output applications that demand superior aerodynamics and durability. As an "Enhanced" (SX-E) model, this unit features a redesigned compressor stage for increased efficiency and airflow compared to the standard S300SX series.

This SuperCore consists of the complete center housing rotating assembly (CHRA) and the compressor housing. It is designed for enthusiasts building custom turbocharger configurations, allowing you to pair this optimized core with a turbine housing that matches your specific displacement and A/R requirements. The core features a forged milled compressor wheel (FMW) and an integrated speed sensor port for precise monitoring.

• Manufacturer Part Number: 13009097053
• Series: AirWerks S300SX-E (S300 High-Flow)
• Compressor Type: Forged Milled Wheel (FMW) with Extended Tip Technology
• Integrated speed sensor port and pre-machined boost port
• 360-degree thrust bearing for improved reliability at high boost pressures
• Note: Turbine housing is not included and must be sourced separately

The BorgWarner AirWerks S300SX-E 9180 SuperCore is a high-performance turbocharger assembly designed for custom engine builds that demand rapid spooling and significant airflow. As part of the SX-E series, this unit features an aerodynamic Forged Milled Wheel (FMW) compressor that provides increased durability and higher pressure ratios compared to traditional cast wheels.

This SuperCore assembly includes the compressor housing and the center rotating assembly (CHRA), allowing builders to pair it with the specific turbine housing A/R required for their application. It comes standard with an integrated speed sensor port and a pre-machined boost control solenoid boss to simplify high-end tuning and monitoring.

• Manufacturer Part Number: 13009097051
• Compressor Inducer: 69.00mm
• Compressor Exducer: 91.44mm
• Compressor Wheel Material: Forged Milled Wheel (FMW)
• Bearing Type: 360-degree thrust bearing for improved reliability
• Series: AirWerks SX-E S300
• Inlet/Outlet: Hose bead compressor inlet and v-band discharge

The BorgWarner AirWerks S300SX-E 9180 SuperCore (MPN 13009097049) is a purpose-built performance assembly designed for high-power applications where reliability and rapid spool are critical. Part of the enhanced SX-E series, this SuperCore features a Forged Milled Wheel (FMW) and a 360-degree thrust bearing to handle the elevated boost pressures and temperatures common in race and high-performance street builds.

This assembly includes the compressor housing and center housing rotating assembly (CHRA). Please note that the turbine housing is sold separately, allowing you to select the precise A/R ratio and flange type required for your specific exhaust manifold and power goals.

• Compressor Wheel Inducer: 66mm
• Compressor Wheel Exducer: 91mm
• Compressor Feature: Forged Milled Wheel (FMW) for increased durability and aerodynamic efficiency
• Thrust Bearing: Heavy-duty 360-degree thrust bearing for high-load stability
• Sensor Ports: Pre-machined integrated speed sensor port and boost port
• Series: AirWerks S300SX-E
• Manufacturer Part Number: 13009097049

The BorgWarner AirWerks S300SX-E 8780 SuperCore (MPN 13009097047) provides a high-performance foundation for custom turbocharger builds. Engineered for extreme efficiency, this SuperCore assembly is part of the SX-E series, designed to deliver higher flow rates and faster transient response compared to standard AirWerks models.

• Forged Milled Wheel (FMW): Utilizes an extended-tip compressor wheel design for improved pressure ratios and durability under high boost.
• Advanced Thrust Bearing: Equipped with a 360-degree thrust bearing to maintain reliability during high-load performance applications.
• Enhanced Compressor Housing: Features a pre-machined speed sensor port and a boost port for easy integration of data logging equipment.
• Assembly Details: This SuperCore includes the compressor housing, center section, and rotating assembly; the turbine housing is sold separately to allow for custom A/R selection.

Manufacturer Part Number: 13009097047

The BorgWarner AirWerks S300SX-E 64mm SuperCore (8776) is a high-performance turbocharger assembly engineered for increased airflow and improved transient response. This SX-E series unit features a Forged Milled Wheel (FMW) and optimized compressor aerodynamics, providing superior durability and efficiency over standard cast alternatives.

As a SuperCore assembly, this unit (MPN 13009097008) includes the compressor housing and the rotating assembly (CHRA) but requires a separate turbine housing for complete installation. This allows builders to select the specific A/R ratio and flange type required for their application. The housing includes a pre-machined speed sensor port and a 360-degree thrust bearing for high-boost reliability.

• Manufacturer Part Number: 13009097008
• Compressor Inducer: 64mm
• Compressor Exducer: 87.37mm
• Series: AirWerks SX-E (S300SX-E)
• Wheel Material: Forged Milled Aluminum (FMW)
• Includes: Compressor housing and bearing assembly (SuperCore)

The BorgWarner AirWerks SX-E S300SX-E SuperCore assembly (MPN 13009097006), specifically the 8776 configuration, is engineered for high-performance forced induction applications. As a cornerstone of the SX-E line, this unit features a 62mm inducer Forged Milled Wheel (FMW) that provides superior aerodynamics and increased durability compared to traditional cast alternatives.

• 62mm compressor inducer diameter for optimized airflow
• Forged Milled Wheel (FMW) compressor technology
• Integrated speed sensor port for precise turbo speed monitoring
• Pre-machined boost port for simplified plumbing
• 360-degree thrust bearing for enhanced reliability under high-load conditions
• Complete SuperCore includes the compressor cover and CHRA

The SX-E series represents an evolution in turbocharger technology, offering improved compressor efficiency and faster spool times. This SuperCore assembly allows you to select a compatible turbine housing separately to match your specific engine displacement and A/R requirements.

The BorgWarner AirWerks SX-E S300SX-E 9180 72mm SuperCore Assembly is engineered for high-output performance applications where efficiency and durability are paramount. As part of the SX-E line, this unit features a Forged Milled Wheel (FMW) and an optimized compressor cover design that delivers increased airflow and pressure ratios compared to standard S300 models.

This SuperCore is designed for builders and tuners looking to custom-match a high-flow compressor with a specific turbine housing. It incorporates a 360-degree thrust bearing for enhanced reliability under high boost pressures and includes an integrated speed sensor port for precise monitoring of shaft RPM. Note: This assembly includes the compressor housing and cartridge; a turbine housing is required for a complete installation.

• Series: AirWerks SX-E (S300SX-E)
• Model: 9180
• Compressor Wheel Inducer: 72mm
• Compressor Wheel Exducer: 91mm
• Forged Milled Wheel (FMW) for maximum durability
• High-load 360-degree thrust bearing
• Integrated speed sensor port and pre-machined boost port
• Manufacturer Part Number: 13009095091

The BorgWarner EFR 9180 B2 Turbocharger is engineered for elite racing performance, delivering massive airflow while maintaining the rapid response expected from the Engineered For Racing series. This unit features a 0.92 A/R investment cast stainless steel turbine housing designed with a Volute Twin Flow (VTF) T4 twin-scroll flange and an integrated internal wastegate for a streamlined installation.

• Gamma-Ti turbine wheel significantly reduces rotational inertia for faster spool-up
• Dual ceramic ball bearing cartridge provides high-speed stability and durability
• Integrated Compressor Recirculation Valve (CRV) and boost control solenoid
• Twin-scroll T4 turbine housing maximizes exhaust pulse energy
• Forged milled compressor wheel (FMW) for increased strength and flow

Manufacturer Part Number: 12809880000

The BorgWarner EFR 9280 B2 SuperCore assembly provides a high-performance foundation for custom turbocharger configurations. As a SuperCore, this unit includes the complete rotating assembly (CHRA) and compressor housing but excludes the turbine housing, allowing you to select the specific A/R and flange type required for your exhaust manifold setup.

Built on the B2 frame, the EFR 9280 features a forged milled compressor wheel (FMW) and a lightweight Gamma-Ti turbine wheel for rapid spool-up and high-flow efficiency. This specific model utilizes a rugged cast iron bearing housing, providing exceptional thermal stability and durability for high-heat applications. Dual ceramic ball bearings minimize friction and improve transient response across the entire powerband.

• Manufacturer Part Number: 12807100005
• Series: EFR B2 9280
• Housing Material: Heavy-duty cast iron bearing housing
• Core Components: Gamma-Ti turbine wheel and forged milled compressor wheel
• Bearings: Dual ceramic ball bearing cartridge
• Integrated Features: Includes compressor recirculation valve (CRV) and boost control solenoid

This genuine BorgWarner EFR B2 Series turbine housing is engineered for high-performance applications that demand a balance between rapid boost response and high-end flow. Designed for the 80mm turbine wheel, the 0.92 A/R ratio provides excellent efficiency for mid-to-high horsepower builds. The T4 twin scroll (divided) inlet configuration is specifically designed to leverage exhaust pulse energy on divided manifold setups for significantly reduced lag.

Built to handle the extreme thermal stresses of racing environments, this housing comes as a complete wastegate assembly (WG Assy) featuring the internal flap mechanism. This ensures precise boost management without the complexity of an external wastegate setup. It is a direct replacement or upgrade for EFR B2 frame turbochargers.

• Series: BorgWarner EFR B2
• Turbine Wheel Diameter: 80mm
• A/R Ratio: 0.92
• Inlet Flange: T4 Twin Scroll (Divided)
• Wastegate Type: Internal Wastegate Assembly
• Manufacturer Part Number: 12801019009

This BorgWarner EFR B2 series turbine housing is engineered for high-performance applications that demand a balance of high-flow capacity and rapid transient response. Designed for B2 frame turbochargers equipped with an 80mm turbine wheel, this housing provides the thermal durability and precise tolerances required for heavy-duty street and track use.

The T4 twin scroll (divided) inlet configuration optimizes exhaust gas pulse energy, significantly reducing spool time and improving low-end torque compared to undivided housings. The 1.05 A/R ratio is ideal for maximizing top-end horsepower while maintaining a broad powerband.

• Series: EFR B2
• Turbine Wheel Diameter: 80mm
• Area/Radius (A/R): 1.05
• Inlet Flange: T4 Twin Scroll (Divided)
• Manufacturer Part Number: 12801019001

This BorgWarner EFR B2 Turbine Housing (MPN: 12801008006) is engineered for high-performance applications requiring maximum exhaust flow and efficiency. Designed specifically for the EFR B2 series with an 80mm turbine wheel, this housing features a 1.45 A/R ratio, making it an ideal choice for high-horsepower builds where reducing backpressure is a priority.

• Series: EFR B2
• Turbine Wheel Diameter: 80mm
• Area/Radius (A/R): 1.45
• Inlet Flange: T4 Twin Scroll
• Housing Type: H Type (External Wastegate)
• Manufacturer Part Number: 12801008006

The twin-scroll T4 design helps optimize exhaust gas pulse energy for faster spool-up and improved transient response compared to single-scroll alternatives of similar volume. The "H Type" designation indicates a non-wastegate configuration intended for use with external wastegate setups.

The BorgWarner EFR 8474 B2 SuperCore Assembly (12747100017) is the high-performance heart of the Engineered For Racing series, designed for maximum response and thermal efficiency. This SuperCore includes the compressor cover and center housing rotating assembly (CHRA), allowing you to pair it with the specific turbine housing that best suits your engine's displacement and power goals.

Built on the B2 frame, this unit features a lightweight aluminum bearing housing, providing significant weight savings over traditional cast iron components while maintaining the high structural integrity required for high-boost applications. The EFR 8474 is engineered for professional motorsport use, balancing high-flow compressor technology with the reliability expected from BorgWarner's premium turbocharger line.

• Manufacturer Part Number: 12747100017
• Series: EFR (Engineered For Racing)
• Model: 8474
• Frame Size: B2
• Bearing Housing: Aluminum for reduced overall weight
• Inclusions: Complete SuperCore (Compressor Cover and CHRA)

This genuine BorgWarner EFR B2 turbine housing is engineered for high-performance applications that demand the exhaust pulse efficiency of a twin-scroll configuration. Designed specifically for EFR B2 series turbochargers equipped with a 74mm turbine wheel, this housing features a 1.05 A/R ratio, providing an ideal balance between low-end spool-up and high-flow top-end performance.

• Manufacturer Part Number: 12741019002
• Series: EFR B2
• Turbine Wheel Diameter: 74mm
• A/R Ratio: 1.05
• Inlet Flange: T4 Twin Scroll

Whether you are replacing a damaged housing or re-configuring your turbocharger setup for a new manifold, this housing offers the precise tolerances required for BorgWarner’s EFR platform. It is designed to bolt directly to the B2 CHRA using the factory V-band or bolted attachment system characteristic of the EFR line.

This BorgWarner EFR B2 Series turbine housing is engineered for the 74mm turbine wheel, offering a balance of high-flow capacity and responsive boost pressure. The .92 A/R ratio is paired with a T4 twin-scroll (divided) inlet flange to optimize exhaust gas pulse energy, significantly reducing turbo lag in high-performance applications. This unit is a complete internal wastegate (WG) assembly, simplifying turbocharger installation by eliminating the need for external wastegate plumbing and manifold modifications.

• Manufacturer Part Number: 12741008001
• Turbo Series: EFR B2
• Turbine Wheel Compatibility: 74mm
• A/R Ratio: 0.92
• Inlet Flange: T4 Twin Scroll (Divided)
• Wastegate Style: Internal Wastegate Assembly

Fits 2017-2019 GM heavy-duty trucks equipped with the 6.6L Duramax L5P engine.

This BorgWarner B2BV SX-R series turbocharger is engineered to provide increased airflow and improved efficiency for the L5P platform. Featuring a precision-machined 84mm compressor wheel, this unit is designed to meet the demands of heavy towing and high-performance diesel applications where reliable boost response is critical.

• Manufacturer Part Number: 12709882081
• Series: B2BV SX-R
• Compressor Inducer Diameter: 84mm
• Application: 6.6L Duramax L5P Diesel
• Direct fit for 2017-2019 Chevrolet Silverado and GMC Sierra 2500HD/3500HD

Fits 2020-2023 GM 6.6L Duramax L5P diesel engines.

The BorgWarner B2BV SX-R 84mm Turbocharger is engineered for high-efficiency airflow and extreme durability on the L5P platform. As part of the performance-oriented SX-R series, this unit features a precision-machined 84mm compressor wheel designed to optimize boost response and handle the thermal loads of heavy-duty towing and high-output applications. It serves as a robust solution for drivers seeking to maintain reliable performance while improving the volumetric efficiency of their 6.6L Duramax engine.

• Product Series: B2BV SX-R
• Compressor Wheel Diameter: 84mm
• Fitment: 2020-2023 GM 6.6L Duramax L5P
• Manufacturer Part Number: 12709882080
• Optimized for diesel performance and airflow management

The BorgWarner AirWerks S200SX-R 7670 SuperCore (12707105086) provides a high-performance foundation for custom turbocharger configurations. This SuperCore assembly includes the compressor housing and a fully balanced Center Housing Rotating Assembly (CHRA), allowing builders to pair the unit with their choice of turbine housing to meet specific backpressure and spool requirements.

Engineered for professional racing and high-performance street applications, the S200SX-R series features optimized compressor blade geometry to maximize airflow while maintaining structural integrity under high boost. This unit is an ideal solution for replacing a damaged core or upgrading an existing setup to the latest SX-R aerodynamics.

• Manufacturer Part Number: 12707105086
• Series: AirWerks S200SX-R (7670)
• Compressor Inducer: 58mm
• Compressor Exducer: 76mm
• Turbine Wheel Diameter: 70mm
• Assembly Type: SuperCore (CHRA and Compressor Housing)

Upgrade or replace your turbocharger housing with the BorgWarner SX-E Style Compressor Cover, engineered specifically for the EFR-7163 series. This high-flow housing utilizes aerodynamic profiles derived from the performance-focused SX-E line to optimize induction efficiency and airflow for your EFR-7163 turbocharger.

• Vehicle Application: Fits BorgWarner EFR-7163 turbochargers.
• SX-E Architecture: Features the optimized inlet geometry and internal tolerances associated with the SX-E performance series.
• Material: High-grade cast aluminum for superior thermal resistance and durability under high boost conditions.
• Precision Fit: Maintains factory-spec clearances for the 7163 compressor wheel to ensure maximum pressure recovery.
• Manufacturer Part Number: 11711013004

This genuine BorgWarner component is ideal for custom performance builds or as a service replacement to restore factory compressor efficiency.

The BorgWarner EFR 7163 B1 Super Core is a high-performance turbocharger assembly designed for rapid transient response and significant power overhead. As a Super Core, this unit includes the compressor cover and the center housing rotating assembly (CHRA), allowing you to select the specific turbine housing that best fits your manifold and A/R requirements. It is an ideal choice for applications demanding the flow of a large turbo with the spool-up characteristics of a much smaller unit.

Built for the rigors of professional racing, the EFR 7163 utilizes a Gamma-Titanium aluminide (Gamma-Ti) turbine wheel, which drastically reduces rotational inertia compared to traditional Inconel wheels. This is supported by a dual ceramic ball bearing cartridge for minimal friction and maximum durability under high boost. The B1 frame size integrates essential components like the compressor recirculation valve (CRV) and boost control solenoid (BCS) directly into the housing to simplify plumbing and improve reliability.

• Manufacturer Part Number: 11637105000
• Compressor Wheel: 71mm outer diameter forged milled wheel (FMW) for high-pressure efficiency.
• Turbine Wheel: 63mm Gamma-Ti construction for ultra-low inertia and instant spool.
• Bearing System: Dual ceramic ball bearings with a water-cooled center housing.
• Integrated Features: Built-in compressor recirculation valve and electronic boost control solenoid.
• Material: Stainless steel bearing housing for superior corrosion resistance and strength.

Restore the peak performance of your turbocharger with the BorgWarner EFR 7163 Cartridge (CHRA). This genuine replacement core is the center housing rotating assembly (CHRA) for the Engineered For Racing (EFR) 7163 series, featuring a robust iron bearing housing designed to withstand the extreme thermal cycles and mechanical stresses of high-performance driving and track use.

• Manufacturer Part Number: 11637100000
• Series: Engineered For Racing (EFR) 7163
• Housing Material: Heavy-duty Iron Bearing Housing
• Assembly: Factory-balanced rotating assembly including compressor and turbine wheels
• Design: Specific to EFR 7163 frame turbochargers

Precision-balanced at the factory to meet strict BorgWarner tolerances, this cartridge eliminates the need for individual component balancing during a turbo refresh. It is an ideal solution for replacing a worn center section while retaining your existing compressor and turbine housings, ensuring the rapid transient response and high-flow efficiency the 7163 is known for.

This BorgWarner EFR B1 Series turbine housing is engineered for high-performance applications that utilize an external wastegate configuration. Designed for the 63mm turbine wheel, the .85 A/R ratio offers an excellent balance between rapid boost response and high-flow efficiency at upper RPM ranges.

Constructed from investment-cast stainless steel, this housing provides exceptional thermal durability and resistance to cracking under extreme exhaust temperatures. The V-band inlet (VOF) design allows for a secure, gasket-free seal and simplifies turbocharger clocking and installation in tight engine bays.

• Manufacturer Part Number: 11631008003
• Series: EFR B1
• Turbine Wheel Diameter: 63mm
• A/R Ratio: .85
• Inlet Type: V-Band (VOF)
• Wastegate: Non-Wastegated (Requires external gate)
• Material: Investment Cast Stainless Steel

The BorgWarner EFR 6758 B1 Super Core (11587105001) is engineered for high-performance applications demanding rapid boost response and professional-grade reliability. As a Super Core assembly, this unit includes the compressor housing and the complete rotating group, providing a versatile foundation that allows you to pair it with the specific turbine housing required for your vehicle's exhaust configuration.

Built on the B1 frame, the EFR 6758 utilizes cutting-edge materials and design features from BorgWarner's Engineered For Racing (EFR) line to maximize efficiency and minimize lag.

• Gamma-Ti Turbine Wheel: Manufactured from Titanium Aluminide for extremely low rotational inertia, enabling near-instantaneous throttle response.
• Dual Ceramic Ball Bearings: Features ceramic balls for superior durability under extreme heat and high-load conditions compared to standard journal bearings.
• Integrated Compressor Recirculation Valve (CRV): Built into the compressor housing to prevent compressor surge and simplify plumbing.
• Robust Construction: Precision-engineered for the rigors of competitive racing and high-performance street use.
• Manufacturer Part Number: 11587105001