Fits 2018-2025 Jeep Wrangler (3.6L). Note: This system does not fit models equipped with the eTorque Mild Hybrid System or Full-Time 4-Wheel Drive.

The Borla 140846 High Clearance Climber / Rock Crawler Cat-Back exhaust is engineered specifically for the Jeep Wrangler JL owner who prioritizes off-road capability. This system features a high-exit design with a 2.5-inch brushed T-304 stainless steel turn down tip, providing maximum ground clearance for overlanding and rock crawling. It delivers the signature Borla Touring sound level—a mellow, deep tone that remains comfortable inside the cabin with a no-drone guarantee.

Built to withstand harsh environments, the system is constructed from premium T-304 stainless steel for superior corrosion resistance and durability. Ultra-smooth mandrel bends ensure consistent exhaust flow, while precision CNC manufacturing provides an accurate, direct bolt-on fit using existing factory hangers.

• Series: Touring High Clearance Climber / Rock Crawler
• Part Type: Cat-Back Exhaust System
• Tubing Diameter: 2.5"
• Material: T-304 Stainless Steel
• Tip Style: 2.5" Brushed Turn Down
• Warranty: Million-Mile Warranty
• Manufacturer Part Number: 140846

Fits 2020-2025 Chevrolet Corvette Stingray (6.2L).

The Borla S-Type Cat-Back exhaust system (140838) provides a powerful, balanced sound with a deep tone for the C8 Corvette, engineered specifically to eliminate interior drone. This 3-inch inlet system utilizes Borla’s patented SwitchFire technology, which replaces the standard X-pipe to merge combustion pulses for optimized performance and an aggressive exhaust note. Combined with the Polyphonic Harmonizer, which uses varied pipe lengths and diameters, this system delivers a clean, full-bodied sound.

Built from premium T-304 stainless steel, this exhaust includes integrated heat shielding to protect critical vehicle components from heat soak. This configuration features quad 4-inch round bright chrome tips (4in x 4.75in) and is designed to integrate with factory AFM ('20-'21), DFM ('22-'25), and NPP dual-mode valves.

• High-quality T-304 stainless steel construction for corrosion resistance
• Patented SwitchFire and Polyphonic Harmonizer technology
• Supports AFM/DFM and NPP valve functionality
• Includes quad 4-inch bright chrome tips
• Strategic heat shielding included for component protection
• Backed by Borla's Million Mile Warranty

Note: This system is only for use on vehicles equipped with O.E. NPP exhaust. After installation, the valve actuators must be re-calibrated according to GM Document ID 5406413. This system ships in two boxes.

Fits select 2015-2020 Ford F-150 models (3.5L), including XL, XLT, Lariat, King Ranch, Platinum, Limited, and Police/SSV trims. Note: Does not fit Raptor models.

The Borla Touring Series Cat-Back Exhaust is engineered for F-150 owners seeking an upgraded exhaust note without interior drone. This system provides a mellow, deep sound while improving exhaust velocity through patented straight-through and multi-core technology. Constructed from premium T-304 stainless steel, it offers superior corrosion resistance over 400-series alternatives.

This side-exit system features a 3-inch inlet pipe that splits into dual 2.25-inch pipes, terminating in 4-inch black chrome angle-cut tips. To maintain the black chrome finish, clean these tips with hot water and a microfiber cloth; polishing compounds are not recommended.

• Full T-304 stainless steel construction for maximum durability
• Ultra-smooth mandrel-bent piping ensures optimal flow and power
• Touring sound level: Mellow tone with no cabin drone
• Includes 4-inch black chrome on T-304 stainless steel tips
• Precision CNC manufactured for a bolt-on fit
• Manufacturer Part Number: 140617BC
• Borla Million-Mile Warranty

Configuration Notes: Crew Cab with Standard Bed (156.8-inch wheelbase) requires Adapter 60556. Extended Cab with Long Bed (163.7-inch wheelbase) requires Adapter 60564.

Fits 2008-2014 Subaru Impreza WRX and WRX STI models. This Borla Performance cat-back exhaust (PN 140312) is engineered to replace the restrictive factory system with a high-flow, 3-inch diameter T-304 stainless steel setup. By upgrading the piping from 2.5 inches to 3 inches and utilizing a patented straight-through muffler design, this system reduces backpressure to unlock the full potential of the turbocharged EJ-series engine, especially on vehicles with Stage 1 or Stage 2 ECU tuning.

Designed for both street and performance use, Borla fabricators tucked the muffler assembly 1.75 inches higher than the original equipment (OE) unit. This provides crucial ground clearance for lowered vehicles or rough terrain while improving rear aerodynamics. The system also reduces vehicle weight by approximately 8 lbs compared to stock. It features quad 3.5-inch double-walled, rolled-edge polished tips that deliver the signature Borla rumble without internal baffles or chambers that rob power.

• Manufacturer Part Number: 140312
• System Type: Cat-Back
• Piping Diameter: 3.0" (76mm)
• Tip Diameter: 3.5" Quad Exit
• Material: T-304 Stainless Steel
• Muffler Design: Patented straight-through technology
• Clearance: 1.75" gain over factory exhaust
• Weight Reduction: Approx. 8 lbs lighter than OE
• Installation: Bolt-on with included hardware

Fits 2024-2025 Ford Mustang GT and GT Premium (5.0L) models NOT equipped with the factory Active Valve Exhaust system. Designed to fit both coupe and convertible body styles.

This Borla S-Type Axle-Back exhaust system (MPN: 11983) delivers a deep, aggressive tone without the interior drone common in lesser systems. Engineered with 2.5-inch mandrel-bent T-304 stainless steel tubing, this system utilizes Borla's patented straight-through, multi-core technology to optimize exhaust velocity and flow. The system is finished with dual 4-inch bright chrome tips for a premium aesthetic that complements the S650 chassis.

Built for durability and performance, Borla uses high-grade T-304 stainless steel throughout the construction, offering superior corrosion resistance compared to 409-series alternatives. This precision-manufactured system bolts directly to factory points for an accurate fit and is backed by a Million-Mile Warranty.

• System Type: Axle-Back
• Tubing Diameter: 2.5"
• Tip Description: 4" Bright Chrome T-304 Stainless Steel
• Sound Level: S-Type (Aggressive)
• Material: T-304 Stainless Steel
• Exit Style: Dual Rear Exit
• Manufacturer Part Number: 11983

Fits 2016-2024 Chevrolet Camaro SS models (V8-6.2L) equipped with factory single-tip exhaust and NOT equipped with NPP Dual Mode Exhaust valves.

The Borla ATAK (Abusive Tongue and Cheek) rear section exhaust is designed for Camaro SS owners who want the highest-volume, most aggressive sound note available without the annoying interior cabin drone. This axle-back system replaces the heavy, restrictive factory muffler assembly with high-flow, straight-through technology to increase exhaust velocity and unleash hidden power.

Each system is precision-manufactured using 2.75-inch mandrel-bent T-304 austenitic stainless steel, a premium material that offers superior durability and corrosion resistance over standard T-400 series or aluminized steel. The system is finished with a pair of 4.5-inch round tips featuring a high-temperature ceramic black finish for a stealthy, high-performance aesthetic.

• System Type: Rear Section / Axle-Back
• Sound Level: ATAK (Most Aggressive)
• Tubing Diameter: 2.75"
• Tip Finish: High-Temp Ceramic Black
• Tip Size: 4.5" Round T-304 Stainless Steel
• Material: Premium T-304 Stainless Steel
• Fitment: Fits both Automatic and Manual Transmissions
• MPN: 11923CB

Installation Note: This system is engineered specifically for vehicles that came from the factory with single tips. It is not compatible with NPP Dual Mode systems. For Coupe owners looking to build a full cat-back system, this unit can be paired with Borla X-Pipe and Mid-Pipe assemblies (Part #60607 or #60610).

Fits 2011-2012 Ford Mustang GT and Boss 302 (5.0L).

The Borla ATAK (Acoustically-Tuned Applied Kinetics) Series Rear Section Exhaust is engineered for high-performance purists who demand the highest decibel levels in Borla's street-legal lineup without sacrificing sound clarity. Unlike conventional loud exhausts that can suffer from distortion or cabin drone, this system is specifically tuned to the 5.0L Coyote's acoustical properties, delivering a focused, aggressive exhaust note throughout the entire RPM range.

Constructed from premium T-304 austenitic stainless steel, this axle-back system features ultra-smooth mandrel-bent piping to ensure maximum flow and power retention. The system is finished with mirror-polished, bright chrome tips for a refined look that matches its high-volume performance. Handmade in the USA, every Borla system is built to last and backed by a Million-Mile Warranty.

• Manufacturer Part Number: 11791
• Series: ATAK (Acoustically-Tuned Applied Kinetics)
• Configuration: Rear Section (Axle-Back)
• Material: T-304 Austenitic Stainless Steel
• Finish: Bright Chrome Tips
• Construction: Mandrel-Bent Tubing
• Warranty: Million-Mile Warranty

Fits 2021-2025 Ford Bronco 2.3L models including Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, and Outer Banks. This Borla S-Type axle-back exhaust system (MPN 11974CB) is engineered specifically for the 2.3L powertrain, providing an aggressive, balanced sound with a deep tone and zero cabin drone.

Constructed from premium T-304 stainless steel, the entire assembly is finished in a high-temperature black coating for superior corrosion resistance and a stealthy aesthetic. The system features a 2.5-inch inlet that transitions into a 2.75-inch muffler inlet, exiting through dual 2.5-inch tailpipes. Ultra-smooth mandrel bends and CNC manufacturing ensure maximum exhaust flow and a precise, bolt-on fit to factory mounting points. For a cleaner look, the muffler hangers are designed to be tucked out of sight.

• Borla S-Type sound level: Aggressive tone with no-drone technology
• Full T-304 stainless steel construction with high-temp black finish
• Dual 4-inch round black coated T-304 stainless steel tips
• 2.5-inch to 2.75-inch inlet piping with dual 2.5-inch tailpipes
• Mandrel-bent tubing for optimized exhaust gas velocity
• Concealed muffler hanger design for improved aesthetics
• Made in the USA
• Manufacturer Million-Mile Warranty

The Borla 60746 is a universal 3" Hydroformed SwitchFire X-Pipe engineered for custom exhaust fabrication where space and performance are paramount. Utilizing a specialized hydroforming process, this unit achieves a significantly lower profile than conventional X-pipes, providing critical ground clearance for lowered vehicles or tight chassis tunnels without sacrificing flow.

Unlike standard X-pipe designs that suffer from turbulent center intersections, Borla’s patented SwitchFire design truly blends the combustion pulses from both cylinder banks. This eliminates turbulence and improves scavenging to produce an aggressive custom sound and enhanced power delivery. Each unit is constructed from premium T-304 austenitic stainless steel—a material far superior to T-400 series alternatives in terms of corrosion resistance and longevity. The un-notched necks are optimized for a clean weld-in installation, but can be adapted for clamping with a 3" wide band clamp (Borla PN 18006).

• Configuration: Universal 3" I.D. Inlet / 3" O.D. Outlet
• Dimensions: 21.1" Long x 7.8" Wide x 5.5" High
• Spacing: 4" Centerline spacing on inlets and outlets
• Material: T-304 Austenitic Stainless Steel with mandrel bends
• Installation: Reversible design; un-notched necks for weld-in setup
• Part Number: 60746
• Warranty: Borla Million-Mile Warranty

Fits 2024-2026 Ford Ranger Raptor models. This Borla Tail Pipe Kit (MPN: 60743CFBA) is engineered to enhance the exhaust note and visual profile of your truck by replacing the factory tailpipe section with high-flow, mandrel-bent T-304 stainless steel.

Constructed from premium T-304 stainless steel for maximum corrosion resistance and durability, this 2.75" diameter kit features a resonator-delete design. By eliminating the factory resonators found in the O.E. tail pipes, this kit provides a more aggressive sound profile while maintaining exhaust velocity. The system is finished with dual 4" round Brawler-style angle-cut tips featuring carbon fiber shells and black anodized accents for a distinct, high-end look.

• Precision Construction: Ultra-smooth mandrel bends ensure maximum exhaust flow and reduced backpressure.
• Resonator Delete: Replaces restrictive factory resonators with straight-through piping for increased sound volume.
• Versatile Fitment: Fully compatible with the O.E. mid-section/muffler or the Borla 60742 Mid-Section/Muffler Assembly.
• Premium Tips: 4" carbon fiber tips with a durable high-temperature black coating and laser-cut Borla logos.
• Integrated Protection: Includes heatshields mounted directly to the pipes to protect vehicle components.
• Warranty: Backed by Borla's Million-Mile Warranty.

Precision CNC manufacturing ensures an accurate, bolt-on fit to factory mounting points.

Fits 2023-2025 Ford F-150 Raptor models.

The Borla ATAK Mid-Section exhaust system is engineered to provide an aggressive, race-inspired sound for your Ford Raptor without interior cabin drone. This true dual 3-inch system is constructed from high-quality T-304 stainless steel, offering superior corrosion resistance and durability over standard T-400 series alternatives. It is designed to integrate seamlessly with the factory active exhaust valves, allowing you to retain full control over your vehicle's exhaust modes.

This system features Borla’s patented SwitchFire technology, which eliminates the turbulent center intersection of a standard X-pipe to better blend combustion pulses for improved performance and a custom sound. Combined with the Polyphonic Harmonizer—which uses specific pipe diameters and lengths to create a rich, full-bodied note—this mid-section delivers the ultimate acoustic experience. This part is designed for use with Borla 60727-series tailpipes (60727BC, 60727CB, 60727CFBA) or the original equipment (O.E.) tailpipes.

• 3-inch true dual design with precision mandrel bends for maximum flow
• Aggressive ATAK sound level with zero drone
• Integrated active exhaust valves to maintain factory valve functionality
• Patented SwitchFire and Polyphonic Harmonizer technology
• Premium T-304 stainless steel construction
• CNC manufactured for an accurate, bolt-on fit
• Million Mile Warranty
• Manufacturer Part Number: 60737

Fits select 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 (4.8L / 5.3L), including Classic models.

Experience the signature Borla "sound of power" with this precision-engineered cat-back exhaust system. More than just a cosmetic upgrade, this system acts as a communication conduit between driver and machine, providing critical acoustic feedback of engine RPM. This sensory input assists with gear selection and throttle management, allowing you to stay precisely within the powerband during spirited driving.

Borla engineers utilize patented technology, computer modeling, and extensive prototyping to tune each system to the specific personality of the vehicle. Constructed from high-quality steel, this system replaces the factory exhaust to deliver unrivaled clarity and a high-performance soundtrack that echoes from the speedway to the highway.

• Direct-fit cat-back exhaust system for GMT800-platform trucks
• Patented technology tuned for optimal 4.8L and 5.3L V8 performance
• Provides clear acoustic feedback to aid in rev-matching and gear selection
• Durable steel construction engineered for longevity and flow
• Manufacturer Part Number: 14824

Fits 2024-2025 Chevrolet Silverado 1500 ZR2 and GMC Sierra 1500 AT4 (6.2L).

The Borla S-Type Cat-Back exhaust system (Part #141003) is engineered specifically for the off-road-oriented Silverado 1500 ZR2 and Sierra 1500 AT4. This system replaces the restrictive factory exhaust with a high-flow 3.5" mandrel-bent main pipe that splits into dual 2.75" turndown tailpipes, providing excellent ground clearance for technical trails. Constructed from premium T-304 austenitic stainless steel, this system is highly resistant to corrosion and built for extreme durability compared to standard 409-series alternatives.

Designed for the enthusiast driver, the S-Type sound profile delivers an aggressive note under acceleration while maintaining a drone-free cabin environment during cruising. This kit includes an integrated valve simulator to bypass factory exhaust valves without triggering a Check Engine Light (CEL), ensuring a seamless bolt-on installation to factory mounting points.

• Product Series: S-Type
• Manufacturer Part Number: 141003
• Material: T-304 Stainless Steel
• Tubing Diameter: 3.5" into dual 2.75"
• Tip Style: Dual Turndown Tailpipes
• Engine Compatibility: 6.2L V8
• Special Features: Includes valve simulator and patented Polyphonic Harmonizer technology
• Warranty: Million-Mile Warranty

For owners seeking maximum volume, this system is compatible with the Borla Polyphonic Harmonizer (60680) to upgrade the sound profile to the ATAK level.

Fits select 2021-2024 Jeep Grand Cherokee L (5.7L) Overland, Summit, and Summit Reserve models. This 2.5" diameter True Dual Cat-Back system is engineered to enhance the HEMI V8 performance while delivering the signature Borla S-Type sound profile with a no-drone interior experience.

Construction features premium high-quality T-304 stainless steel throughout, offering superior corrosion resistance compared to T-400 series alternatives. The system includes a Merge X-Pipe to balance exhaust pulses and increase velocity, combined with ultra-smooth mandrel-bent tubing to ensure maximum flow. The exit design features 2.25" tail pipes specifically designed to align with and reuse the Original Equipment (O.E.) valance-mounted exhaust tips for a clean, factory-integrated look.

• System Type: Cat-Back Exhaust
• Sound Level: S-Type (Aggressive yet refined)
• Pipe Diameter: 2.5" into dual 2.25" outlets
• Material: T-304 Stainless Steel
• Muffler Type: Patented Straight-Through Multi-Core
• Exit: Dual Rear (Fits O.E. Valance/Tips)
• MPN: 140987

Note: This system does not include exhaust tips; it is designed to be used with the factory valance-mounted tips already installed on the vehicle.

Fits 2022-2026 Nissan Frontier (3.8L) including PRO-4X, PRO-X, S, SL, and SV models.

Maximize ground clearance and off-road capability with the Borla S-Type Cat-Back exhaust system. Engineered specifically for the Rock Crawler and Climber enthusiast, this 2.25-inch true dual system features a high-clearance design with turn-down tailpipes to prevent contact with obstacles during technical maneuvers. The included muffler features an internal H-pipe to optimize exhaust flow and scavenging, delivering the signature S-Type sound—a deep, aggressive performance note with zero cabin drone.

Built for the trail, the entire system is constructed from premium T-304 austenitic stainless steel, providing superior corrosion resistance and durability compared to 400-series steel. CNC manufacturing ensures a precise, bolt-on fitment to factory mounting points.

• High-clearance Rock Crawler design with dual turn-down tailpipes
• 2.25-inch True Dual T-304 stainless steel construction
• S-Type sound level: Aggressive performance tone with no drone
• Internal muffler H-pipe for increased exhaust velocity
• Brushed T-304 stainless steel turn-down tips with laser-etched Borla logo
• Direct bolt-on installation
• Million Mile Warranty
• Manufacturer Part Number: 140985

Fits 2023-2024 Honda Accord EX and LX (1.5L).

The Borla S-Type Cat-Back exhaust system (MPN: 140983) is engineered specifically for the 11th generation Honda Accord to deliver a sportier, more aggressive exhaust note than the factory setup. This system features Borla's patented straight-through and multi-core technology, which increases exhaust velocity for improved performance while maintaining a drone-free cruising experience for daily comfort.

Built from premium T-304 austenitic stainless steel, this exhaust is designed to resist corrosion and outperform standard T-400 series materials. The configuration utilizes 2.5-inch diameter piping that transitions into dual 2.25-inch pipes, ending in brushed turn-down exits behind the rear mufflers. The system includes an internal H-pipe within the front muffler to optimize sound quality and pressure balancing. Precision CNC manufacturing and ultra-smooth mandrel bends ensure an accurate bolt-on fit and maximum flow.

• T-304 austenitic stainless steel construction for superior durability
• S-Type sound level: aggressive, sporty tone without cabin drone
• 2.5" into dual 2.25" mandrel-bent piping for optimized flow
• Internal H-pipe integrated into the front muffler
• Dual brushed stainless steel turn-down exits
• Direct bolt-on fitment to factory mounting points
• Manufacturer Million-Mile Warranty

Fits 2022-2025 Honda Civic Sport (2.0L).

The Borla S-Type Cat-Back exhaust system is engineered to enhance the 2.0L Honda Civic Sport with a more aggressive, sporty sound profile while maintaining a drone-free cabin environment. This bolt-on system is constructed from premium T-304 austenitic stainless steel, providing superior corrosion resistance and long-term durability on the street. The system features 2.25-inch ultra-smooth mandrel-bent piping to optimize exhaust flow and power delivery.

This configuration is finished with a 4.5-inch black chrome on T-304 stainless steel tip for a high-end, stealthy aesthetic. Note: To maintain the finish of the black chrome tip, do not use metal polish; clean only with hot water and a microfiber cloth. Every system is precision-manufactured using CNC technology to ensure an exact fit to factory mounting points.

• System Type: Cat-Back
• Sound Level: S-Type (Sporty/Aggressive)
• Piping Diameter: 2.25"
• Tip Description: 4.5" Black Chrome on T-304 Stainless Steel
• Material: T-304 Stainless Steel
• Exit Style: Single Right Rear Exit
• Manufacturer Part Number: 140941BC
• Warranty: Borla Million-Mile Warranty

Fits select 2021-2025 Ford F-150 models (2.7L / 3.5L) including XL, XLT, Lariat, King Ranch, and Platinum trims. This system excludes 3.5L V6 PowerBoost, Raptor, and Black Appearance Package configurations.

The Borla Touring Cat-Back exhaust system provides a mellow, deep exhaust note for the 2021-2025 Ford F-150, delivering a subtle increase in volume over the factory system without any cabin drone. Engineered with a 3-inch inlet leading into dual 2.25-inch pipes, this system features a dual side exit (passenger side) that replaces the factory single-exit tailpipe with high-performance T-304 stainless steel construction.

Built from premium austenitic T-304 stainless steel, this system utilizes ultra-smooth mandrel bends to maximize exhaust velocity and flow. The kit is finished with dual 4-inch round black chrome tips. Note: Do not use Borla Stainless Steel Polish (p# 21499) on black chrome tips; clean only with hot water and a microfiber cloth to preserve the finish.

• System Type: Cat-Back Exhaust
• Sound Level: Touring (Mellow)
• Material: T-304 Stainless Steel
• Tubing Diameter: 3" into dual 2.25"
• Tip Description: Dual 4" Round Black Chrome T-304 Stainless Steel
• Exit Style: Dual Side Exit (behind passenger rear wheel)
• Fitment Notes: Fits Crew Cab/Short Bed (5' 6" bed) and Extended Cab/Standard Bed (6' 6" bed).
• Adapter Required: Use 60556 for Crew Cab/Standard Bed (157.2" WB); Use 60564 for Extended Cab/Long Bed (164.1" WB).
• MPN: 140870BC
• Warranty: Million Mile Warranty

Fits 2021-2026 Chevrolet Tahoe Premier (5.3L V8) models equipped with factory quad tips ONLY.

Enhance the performance and acoustic profile of your vehicle with the Borla Touring Cat-Back exhaust system. Engineered specifically for the 5.3L V8 engine, this system utilizes a 3-inch inlet into dual 2.75-inch piping to increase exhaust velocity and flow. The Touring series muffler provides a mellow, deep exhaust note that delivers the signature Borla sound without any interior drone, making it ideal for daily driving and long-distance towing.

This system is constructed from premium T-304 stainless steel, offering superior corrosion resistance and durability compared to standard T-400 series or aluminized steel. CNC-machined mandrel bends ensure consistent pipe diameter throughout for maximum flow. The exit features dual 4-inch round black chrome tips on each side for a striking, custom appearance. Note: To maintain the black chrome finish, clean with hot water and a microfiber cloth only; do not use stainless steel polish.

• System Type: Cat-Back Exhaust
• Series: Touring (No-Drone Sound)
• Piping Diameter: 3.0" into dual 2.75"
• Tip Description: Quad 4" Round Black Chrome on T-304 Stainless Steel
• Exit Style: Split Rear Exit
• Material: T-304 Stainless Steel
• MPN: 140856BC
• Warranty: Million-Mile Warranty

Fits select 2020-2025 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD (6.6L gas engine). This Borla S-Type Cat-Back™ exhaust system (MPN 140833BC) is engineered to provide an aggressive, high-performance exhaust note with zero drone in the cabin. Constructed from premium T-304 stainless steel, this system uses 3.5-inch diameter mandrel-bent tubing to optimize exhaust velocity and flow over restrictive factory setups.

The system is finished with a 5-inch round black chrome on T-304 stainless steel tip for a sleek, durable aesthetic. Please note that Borla Stainless Steel Polish (p# 21499) should not be used on these black chrome tips; cleaning with hot water and a microfiber cloth is recommended to maintain the finish.

• System Type: Cat-Back™ Exhaust
• Series: S-Type
• Tubing Diameter: 3.5"
• Tip Size: 5" Round
• Tip Finish: Black Chrome
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140833BC
• Warranty: Million-Mile Warranty

Note: This system fits gasoline engines only (EXCEPT Diesel). It is designed for single rear wheel vehicles (EXCEPT Dual Rear Wheels). For Crew Cab models with a Long Bed (8' 2", 172" Wheelbase), extension pipe 60713 is required for installation.

Fits 2020-2025 Ford Explorer Base, Limited, ST-Line, Timberline, and XLT models equipped with the 2.3L EcoBoost engine.

Borla’s S-Type Cat-Back exhaust system (PN 140824) is engineered to provide a balanced, sporty acoustic profile for the Ford Explorer 2.3L without introducing cabin drone. This system utilizes a 2.5-inch inlet that transitions into dual 2.25-inch piping, optimizing exhaust flow and velocity. Built for longevity and performance, the assembly is constructed from premium T-304 stainless steel to resist corrosion and includes brushed turndown tips for a clean, under-bumper look.

The system features ultra-smooth mandrel bends to minimize restriction and increase power across the RPM range. Designed as a direct bolt-on replacement for the factory exhaust, it mounts to existing OE hang points for a straightforward installation. This S-Type system delivers the aggressive growl Borla is known for while maintaining daily-driver comfort.

• System Type: Cat-Back Exhaust
• Sound Level: S-Type (Aggressive/Sporty)
• Material: T-304 Stainless Steel
• Tubing Diameter: 2.5" into dual 2.25"
• Tip Style: 2.25" Brushed Turndown Tips
• Installation: Bolt-on factory mounting points
• Warranty: Million-Mile Warranty
• Manufacturer Part Number: 140824

Fits 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 (5.3L V8) equipped with factory single side-exit exhaust. This system is designed for the 147.4-inch wheelbase, fitting Extended Cab Standard Bed (78.8") and Crew Cab Short Bed (69.3") configurations. Note: Crew Cab Standard Bed (157" WB) models require adapter 60708.

Experience the Borla "Sound of Power" without the interior cabin drone. The Touring series is specifically tuned to provide a mellow, deeper-than-stock exhaust note that is perfect for daily driving and towing. This cat-back system is engineered from premium T-304 austenitic stainless steel, providing superior corrosion resistance and durability compared to T-400 series alternatives.

• System Type: Cat-Back
• Piping Diameter: 3.0-inch mandrel-bent tubing
• Tip Description: 4-inch round black chrome on T-304 stainless steel
• Exit Style: Single side exit behind passenger rear wheel
• Patented straight-through and multi-core technology for optimized flow
• Precision CNC manufacturing ensures a direct-fit, bolt-on installation
• Manufacturer Part Number: 140793BC

Maintenance Note: To preserve the finish of the black chrome tip, clean only with hot water and a microfiber cloth. Use of stainless steel polish is not recommended for this specific finish.

Fits 2014-2021 Jeep Grand Cherokee 4DR models equipped with the 3.6L V6 engine, All-Wheel Drive (AWD), and automatic transmission.

Give your Jeep Grand Cherokee the "Borla Sound of Power" with the S-TYPE Cat-Back exhaust system. Engineered for drivers who want an aggressive exhaust note under acceleration without excessive drone during highway cruising, this system features Borla’s patented straight-through and multi-core technology. This design increases exhaust velocity to improve engine efficiency and throttle response.

Constructed entirely from premium T-304 stainless steel, this system outlasts T-400 series alternatives in corrosion resistance and durability. The 2.50-inch tubing is CNC-manufactured with ultra-smooth mandrel bends to maintain maximum flow throughout the system. The exit is finished with a striking black chrome on T-304 stainless steel tip for a high-end aesthetic.

• System Type: Cat-Back Exhaust
• Series: S-TYPE
• Tubing Diameter: 2.50"
• Tip Description: Black Chrome on T-304 Stainless Steel
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140748BC
• Warranty: Borla Million-Mile Warranty

Care Note: Do NOT use Borla Stainless Steel Polish (p# 21499) on these black chrome tips. To maintain the finish, clean only with hot water and a soft microfiber cloth.

Fits 2017-2023 Chevrolet Camaro ZL1 (6.2L) models.

The Borla ATAK (Abusive Tongue and Cheek) Cat-Back exhaust system is specifically engineered to maximize the acoustic profile and exhaust velocity of the 6.2L Chevrolet Camaro ZL1. This system is designed for enthusiasts seeking the highest decibel level in the Borla lineup while maintaining a crisp, performance-oriented tone without distortion. It features integrated NPP valves to retain the factory dual-mode exhaust functionality.

Built for durability and flow, this system is constructed from premium T-304 stainless steel, which offers superior corrosion resistance compared to 400-series aluminized steel. The 140727 kit includes a specialized Merge X-Pipe for balanced exhaust scavenging and ultra-smooth mandrel-bent tubing to minimize backpressure. The system is finished with quad 4-inch polished T-304 stainless steel tips for a refined aesthetic.

Note: Installation requires cutting the factory O.E. exhaust system. This specific configuration is not recommended for use on convertible models.

• System Type: Cat-Back Exhaust
• Sound Level: ATAK (Most Aggressive)
• Material: T-304 Stainless Steel
• Tubing: Mandrel-Bent
• Tip Description: 4-inch Polished T-304 Stainless Steel
• Exit Style: Dual Split Rear Exit
• Features: Integrated NPP Valves and Merge X-Pipe
• Warranty: Million-Mile Warranty
• Manufacturer Part Number: 140727

Fits 2015-2022 Dodge Challenger SRT Hellcat, Demon, Redeye, Jailbreak, and Super Stock models (6.2L).

This Borla S-TYPE Cat-Back exhaust system (MPN 140642) is engineered to deliver an aggressive growl without the interior drone common in high-performance setups. The system features a 3-inch diameter layout with a Merge X-Pipe to balance exhaust pulses and increase velocity for improved power and throttle response. Constructed from premium T-304 austenitic stainless steel, this system offers superior durability and corrosion resistance compared to T-400 series alternatives.

This configuration includes functioning Multi-Displacement System (MDS) valves to maintain factory electronic exhaust valve operation. It is designed to work with the factory valance and does not include exhaust tips, allowing you to retain the original factory appearance.

• 3-inch diameter mandrel-bent T-304 stainless steel tubing for maximum flow
• Merge X-Pipe for optimized performance and a smooth exhaust note
• Equipped with functioning MDS valves to integrate with factory electronics
• S-TYPE sound profile provides a deep tone with no interior drone
• Designed for use with factory tips and rear valance
• High-precision CNC manufacturing ensures an accurate fit

Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models, including High Country, LTZ, Denali, and SLT trims with a 143.5-inch wheelbase.

The Borla ATAK (Acoustically Tuned Applied Kinetics) Series Cat-Back exhaust is designed for the enthusiast who demands the most aggressive sound level in the Borla catalog. This system provides a high-clarity, high-volume exhaust note that delivers acoustic feedback to the driver without sacrificing engine performance. Engineered for a direct fit, this system bolts to the factory mounting points behind the catalytic converter.

• Series: ATAK (Acoustically Tuned Applied Kinetics)
• Exit Configuration: Dual Rolled Side Exit (behind the rear wheel)
• Wheelbase: 143.5-inch (Extended Cab/Standard Bed or Crew Cab/Short Bed)
• Construction: High-quality T-304 stainless steel
• Manufacturer Part Number: 140577

By utilizing computer modeling and extensive prototyping, Borla engineers have tuned this system specifically for the 2014-2018 GM 1500 platform to ensure the exhaust note reflects the truck's performance capabilities while maintaining durability and flow efficiency.

Fits select 2015-2020 Chevrolet Suburban, GMC Yukon, and GMC Yukon XL models equipped with the 5.3L V8 engine.

The Borla Touring Cat-Back exhaust system (MPN: 140558) is engineered for drivers who want the performance of a high-flow exhaust with a mellow, neighbor-friendly sound profile. This system features a 2.75-inch front pipe with a high-quality integrated flex joint that transitions into dual 2.25-inch tailpipes, exiting on the same side behind the rear wheel. Each tailpipe is finished with a 4-inch round bright chrome T-304 stainless steel tip for a premium appearance.

Constructed entirely from premium T-304 stainless steel, this system offers superior corrosion resistance compared to T-400 series alternatives. Borla utilizes ultra-smooth mandrel bends and CNC manufacturing to ensure maximum exhaust velocity and a precise fit to factory mounting points. The patented straight-through, multi-core muffler design reduces backpressure to improve efficiency and power without the drone associated with typical performance exhausts.

• System Type: Cat-Back Exhaust
• Sound Level: Touring (Mellow)
• Exit Style: Dual Same Side Behind Rear Wheel
• Tubing Diameter: 2.75" into dual 2.25"
• Tip Size: 4" Round
• Tip Finish: Bright Chrome
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140558
• Warranty: Million-Mile Warranty

Fits 2011-2014 Ford Mustang Base models equipped with the 3.7L engine.

The Borla S-Type Cat-Back exhaust system (MPN 140375) is engineered to optimize exhaust velocity and flow for the 3.7L V6 Mustang. Utilizing patented straight-through and multi-core technology, this system provides the signature Borla "Sound of Power" while maintaining street-ready performance. Every component is built from premium T-304 stainless steel, offering superior corrosion resistance compared to 400-series materials.

Precision CNC manufacturing and ultra-smooth mandrel bends ensure an accurate fit and maximum air volume. The system features bright chrome-finished T-304 stainless steel tips for a durable, high-luster appearance. This kit is a direct-fit upgrade designed to replace the restrictive factory exhaust components from the catalytic converter back.

• System Type: Cat-Back Exhaust
• Series: S-Type
• Material: T-304 Stainless Steel
• Tubing: Mandrel-bent
• Tip Finish: Bright Chrome
• Manufacturer Part Number: 140375
• Warranty: Borla Million-Mile Warranty

Fits 2025 Kia K4 (2.0L) EX, LX, and LXS models.

The Borla S-Type Axle-Back exhaust system (part number 11991) is engineered specifically for the 2025 Kia K4 2.0L powertrain. This 2.25-inch diameter system provides a sportier, more aggressive exhaust note while maintaining a drone-free experience during highway cruising. By replacing the restrictive factory rear section, this system improves exhaust velocity and flow through Borla's patented straight-through and multi-core muffler technology.

Constructed from premium T-304 austenitic stainless steel, this system is highly resistant to corrosion and more durable than T-400 series or 409 stainless steel alternatives. The exhaust exits through a 2.25-inch brushed turndown tip featuring a precision laser-cut Borla logo. CNC manufacturing and ultra-smooth mandrel bends ensure an accurate bolt-on fit to the factory mounting points.

• System Type: Axle-Back
• Sound Level: S-Type (Sporty/Refined)
• Main Piping Diameter: 2.25 inches
• Material: T-304 Stainless Steel
• Tip Style: Brushed Turndown with Laser-Cut Logo
• Includes all necessary installation hardware
• Borla Million-Mile Warranty

The Borla 3.0in Universal X-Pipe is an essential component for fabricators building high-performance custom exhaust systems. Designed to synchronize exhaust pulses, this X-pipe improves scavenging and balances sound notes for a more refined, aggressive tone compared to traditional H-pipes. It is manufactured from premium T-304 stainless steel, offering superior corrosion resistance and longevity compared to 409-grade alternatives.

This unit utilizes ultra-smooth mandrel bends to maintain a consistent diameter throughout the crossover, ensuring maximum exhaust flow and minimal backpressure. The precision CNC manufacturing ensures accurate dimensions for easier fitment during custom fabrication. Please note that installation requires specific hardware; use 1.0-inch wide band clamps on the notched inlet connections and 3.0-inch wide band clamps on the un-notched outlet connections.

• Diameter: 3.0in Inlets and Outlets
• Inlet Centerline: 4.43in
• Outlet Centerline: 3.51in
• Overall Length: 21.06in
• Material: High-quality T-304 Stainless Steel
• Construction: Mandrel-bent tubing for maximum flow
• Recommended Clamps: 18330 (Inlet) / 18006 (Outlet) - Sold Separately
• Manufacturer Part Number: 621106
• Warranty: Borla Million-Mile Warranty