Fits select 1998-2017 Acura ILX, Honda Accord, Civic, CR-V, CR-Z, Element, and Fit models.

The Brembo Premium UV Coated rotor (09.7932.11) is engineered as a direct replacement that meets or exceeds original equipment specifications. This rotor features a specialized solvent-free UV coating that protects the entire disc, including the braking plate surfaces, against corrosion and environmental wear. To ensure professional-grade performance, High Carbon cast iron is used where applicable to minimize noise, vibration, and harshness (NVH) while optimizing heat dissipation.

For a complete and simplified installation, this rotor includes a fixing screw kit containing all necessary hardware. Brembo also incorporates intelligent marking on the rotor, allowing technicians to easily identify the part number and minimum thickness during service. To maintain peak braking performance and even wear, it is recommended to install new Brembo pads alongside these rotors.

• Direct OE Replacement: Precision-engineered to bolt directly to factory mounting points.
• UV Coating: Environmentally friendly, solvent-free finish for superior corrosion protection.
• Metallurgy: High Carbon cast iron construction reduces vibration and enhances driving comfort.
• Installation Hardware: Fixing screw kit included for a straightforward install.
• Manufacturer Part Number: 09.7932.11

Fits select 1992-2010 Lexus GS300, GS400, GS430, IS300, LS400, SC300, SC400, and SC430 models. This Brembo Premium UV Coated rotor is engineered as a direct-fit replacement that meets or exceeds original equipment standards for braking performance and safety.

The 09.7931.11 rotor features Brembo's environmentally friendly, solvent-free UV coating. This protective layer is applied to the entire disc, including the braking surfaces and the hub, to provide superior corrosion resistance over the life of the part. High-carbon cast iron construction is utilized where applicable to minimize noise, vibration, and harshness (NVH) while optimizing thermal capacity for consistent stopping power and enhanced driving comfort.

• UV Coated Finish: Provides a clean, metallic appearance while protecting against rust and environmental wear.
• High-Carbon Metallurgy: Enhances damping characteristics to reduce brake squeal and pedal vibration.
• Intelligent Marking: Features laser-etched part numbers and minimum thickness specifications for easy inspection and maintenance.
• Installation Ready: Includes a fixing screw kit with the necessary hardware for a straightforward bolt-on replacement.
• Manufacturer Part Number: 09.7931.11

Fits 2005-2007 Subaru Impreza WRX STI and WRX STI Limited.

The Brembo Premium Xtra Series is engineered as a performance-oriented direct replacement that meets or exceeds OEM specifications. These cross-drilled rear rotors provide enhanced cooling and consistent friction levels under demanding conditions. To ensure longevity and a clean aesthetic, Brembo applies a solvent-free, environmentally friendly UV coating that protects the entire disc surface, including the braking plate, from corrosion.

Manufactured using high-carbon cast iron where applicable, these rotors are designed to minimize noise, vibration, and harshness (NVH) while maximizing heat dissipation. Each rotor features intelligent marking, allowing for quick identification of the manufacturer part number and the minimum wear thickness for safer maintenance intervals.

• Manufacturer Part Number: 09.7813.2X
• Position: Rear
• Design: Cross-drilled for improved ventilation and pad degassing
• Finish: Full UV coating for superior corrosion resistance
• Material: High-carbon cast iron for enhanced thermal capacity and comfort
• Hardware Included: Fixing screw kit for a complete, worry-free installation

Fits 2005-2007 Subaru Impreza WRX STI and WRX STI Limited.

This Brembo Premium UV Coated rotor is engineered as a direct-fit replacement that meets or exceeds original equipment specifications. The solvent-free UV coating provides a clean, silver finish that offers superior corrosion protection for the entire disc, including the braking surfaces and the hub. This specialized coating ensures the rotor maintains its appearance and integrity over its service life.

Constructed with high-carbon cast iron where applicable, these rotors are designed to minimize harmonic noise and vibration while maximizing heat dissipation for consistent braking performance. For a complete service, Brembo includes a fixing screw kit containing all necessary hardware for a straightforward installation. Each rotor features intelligent marking that clearly displays the Brembo part number and the minimum thickness for easy maintenance checks.

• Direct OE Replacement: Engineered to match factory dimensions and tolerances for a perfect fit.
• UV Coating: Solvent-free, environmentally friendly coating protects against rust and corrosion.
• High-Carbon Metallurgy: Reduces brake squeal and vibration for improved driving comfort.
• Hardware Included: Comes with a fixing screw kit for a hassle-free install.
• Maintenance Ready: Laser-etched part number and minimum thickness specifications.
• Manufacturer Part Number: 09.7813.21

Fits 2004 Subaru Impreza WRX STI.

The Brembo Xtra series is a performance-oriented evolution of the standard brake rotor, designed to deliver superior stopping power and heat management. These rear rotors feature a precision cross-drilled design that effectively dissipates heat, gases, and water, ensuring a consistent friction coefficient and better initial bite. Each rotor is treated with a solvent-free, environmentally friendly UV coating that provides comprehensive protection against corrosion, even on the braking surfaces.

Manufactured using high-carbon cast iron where applicable, these rotors are engineered to minimize noise, vibration, and harshness (NVH) while maximizing thermal capacity. For a straightforward installation, Brembo includes a fixing screw kit with all necessary hardware.

• Manufacturer Part Number: 09.7813.1X
• Design: Cross-drilled for enhanced cooling and gas dissipation
• Finish: UV coated for long-lasting corrosion resistance
• Material: High-carbon cast iron for reduced vibration and improved comfort
• Hardware: Includes fixing screw kit for direct replacement
• Identification: Features intelligent marking for easy tracking of part number and minimum thickness

Fits 2004 Subaru Impreza WRX STI.

Brembo Premium UV Coated rotors are engineered as direct-fit replacements that meet or exceed original equipment specifications. This rotor features an environmentally friendly, solvent-free UV coating that provides superior corrosion protection across the entire disc, including the braking surfaces. Depending on the specific application, high carbon cast iron is used to minimize noise and vibration while maximizing thermal capacity for enhanced driving comfort and performance.

• Direct OE-equivalent replacement ensures proper fitment and braking geometry.
• Solvent-free UV coating offers long-lasting resistance to corrosion and environmental factors.
• High carbon metallurgy (where applicable) reduces brake judder and noise.
• Intelligent marking location allows for easy identification of the part number and minimum thickness.
• Included fixing screw kit provides all necessary hardware for a straightforward installation.
• Manufacturer Part Number: 09.7813.11

For optimal braking performance and safety, Brembo recommends replacing rotors and pads together. This rear rotor is designed to work seamlessly with Brembo NAO/Ceramic or Low-Metallic brake pad formulations.

Fits select 2004-2021 Subaru Impreza WRX STI and WRX, and 2018-2020 Toyota 86.

The Brembo Premium Xtra series is engineered to provide superior cooling and enhanced initial bite. These cross-drilled rotors feature specialized holes that continuously refresh the friction material and dissipate heat and gases more effectively than standard rotors. Constructed from high-carbon cast iron, these rotors minimize vibration and noise while maximizing thermal capacity for consistent braking under demanding conditions.

Brembo's solvent-free UV coating covers the entire disc, including the braking plate surfaces, providing exceptional corrosion resistance while remaining environmentally friendly. Each rotor includes a fixing screw kit for a straightforward installation and features intelligent marking to easily identify part numbers and minimum thickness levels.

• Manufacturer Part Number: 09.7812.2X
• Position: Front
• Design: Cross-drilled and UV coated
• Bolt Pattern: 5x114.3mm
• Material: High Carbon cast iron
• Performance: Enhanced thermal dissipation and improved wet-weather response
• Direct OE replacement that meets or exceeds factory specifications

Fits select 2004-2021 Subaru Impreza WRX STI and WRX, and 2018-2020 Toyota 86 models.

This Brembo Premium UV Coated rotor is engineered as a direct replacement that meets or exceeds original equipment specifications. The solvent-free UV coating provides comprehensive protection for the entire disc, including the braking surfaces, ensuring superior corrosion resistance and maintaining a clean, professional appearance through the wheel spokes. Constructed from high carbon cast iron, these rotors are designed to minimize noise and vibration (NVH) while maximizing thermal dissipation for consistent stopping power and enhanced driving comfort.

Brembo simplifies maintenance with intelligent marking on the rotor edge, clearly displaying the part number and minimum thickness. For optimal braking performance and safety, Brembo recommends replacing rotors and pads as a complete set.

• Manufacturer Part Number: 09.7812.21
• Bolt Pattern: 5x114.3mm
• Material: High carbon cast iron for superior thermal capacity and reduced noise
• Finish: Environmentally friendly, solvent-free UV coating for total protection
• Installation: Includes a fixing screw kit with necessary hardware
• Type: Front brake rotor (OE Equivalent)

Fits select 2004-2020 Subaru BRZ, Impreza WRX STI, and Toyota 86.

The Brembo Premium Xtra rotor is engineered to provide superior braking performance through a specialized cross-drilled design. These perforations enhance the initial bite of the brake pads while simultaneously improving cooling and venting gases or debris that can cause brake fade. Developed as a direct replacement for OE components, these rotors feature an environmentally friendly, solvent-free UV coating that protects the entire disc—including the braking surfaces—against corrosion and oxidation.

Constructed from high-carbon cast iron to minimize noise, vibration, and harshness (NVH), these rotors ensure maximum driving comfort without sacrificing thermal capacity. Each rotor includes intelligent marking for easy identification of the part number and minimum thickness (Min Th), along with a fixing screw kit for a straightforward installation.

• Series: Premium Xtra
• Position: Front
• Design: Cross Drilled
• Coating: UV Coated (Corrosion Resistant)
• Material: High Carbon Cast Iron
• Bolt Pattern: 5x100mm
• MPN: 09.7812.1X
• Included Hardware: Fixing screw kit

Fits select 2004-2020 Subaru BRZ, Impreza WRX STI, and Toyota 86 models. This Brembo Premium UV Coated rotor is engineered as a direct OE-equivalent replacement that meet or exceeds factory specifications for stopping power and durability.

Constructed from High Carbon cast iron where applicable, this rotor is designed to minimize noise and vibration while maximizing thermal capacity for enhanced driving comfort. The solvent-free, environmentally friendly UV coating provides complete protection for the disc, including the braking plate surfaces, ensuring a clean look and long-term corrosion resistance. For ease of installation, each rotor includes a fixing screw kit with all necessary hardware.

• Manufacturer Part Number: 09.7812.11
• Placement: Front Axle
• Bolt Pattern: 5x100mm
• Direct replacement for factory rotors
• High Carbon cast iron for superior damping and performance
• UV coating offers superior corrosion protection and aesthetics
• Intelligent marking locations for part number and minimum thickness verification
• Includes fixing screw kit for a hassle-free install

Fits select 1999-2008 BMW 323Ci, 323i, 325Ci, 325i, 325xi, 328Ci, 328i, Z3, and Z4 models.

Brembo Premium Xtra rotors are engineered to provide a significant upgrade over standard OE components. Part of the Xtra line, these rotors feature a specific hole pattern drilled into the braking surface. This design enhances initial bite, improves cooling during aggressive driving, and continuously clears brake pad gases and debris for consistent performance. To ensure long-lasting aesthetics and durability, each rotor is treated with a solvent-free UV coating that protects against corrosion on the hub, outer rim, and braking plate surfaces.

Constructed from high-carbon cast iron where applicable, these rotors are designed to minimize noise and vibration while maximizing thermal capacity. Each rotor includes a fixing screw kit for a straightforward installation. For safety and maintenance accuracy, Brembo includes intelligent marking on the rotor edge showing the part number and minimum thickness (Min Th.).

• Manufacturer Part Number: 09.7701.1X
• Series: Premium Xtra
• Rotor Type: Cross Drilled, Vented
• Finish: Protective UV Coating
• Material: High-Carbon Cast Iron
• Position: Front
• Included Hardware: Fixing screw kit

Fits 1994-2005 Mazda Miata (all submodels including Base, LS, SE, and Mazdaspeed).

Brembo UV Coated rotors are engineered as a direct replacement that meets or exceeds OE specifications. These rotors feature an environmentally friendly, solvent-free UV coating that provides comprehensive corrosion protection across the entire disc, including the braking surfaces. Constructed from high-carbon cast iron, these rotors are designed to minimize noise and vibration while maximizing thermal capacity for consistent pedal feel and enhanced driving comfort.

Each rotor includes a fixing screw kit with the necessary hardware for a straightforward installation. Brembo's intelligent marking system displays the part number and minimum thickness directly on the rotor for easy maintenance monitoring. For optimal results, it is recommended to replace rotors and pads together to restore factory braking performance.

• Position: Front
• Manufacturer Part Number: 09.7379.11
• Finish: Solvent-free UV Coating for superior protection
• Material: High-carbon cast iron to reduce noise, vibration, and harshness (NVH)
• Hardware: Included fixing screw kit
• Compliance: Meets or exceeds OEM specifications

Fits 1990-1996 Nissan 300ZX Base, Turbo, and 2+2 models.

Brembo UV Coated rotors are engineered as a direct replacement that meets or exceeds original equipment specifications. The solvent-free UV coating provides comprehensive protection for the disc, including the braking plate surfaces, ensuring a durable and corrosion-resistant finish. High Carbon cast iron construction is utilized to minimize noise and vibration (NVH), providing maximum braking performance and enhanced driving comfort. Each rotor includes intelligent marking that displays the part number and minimum thickness for easy maintenance checks.

• Manufacturer Part Number: 09.6912.10
• UV coating provides superior corrosion protection for all disc surfaces
• High Carbon cast iron reduces noise and vibration while improving heat management
• Direct OE-equivalent replacement ensures factory-like fit and function
• Includes fixing screw kit with necessary hardware for installation
• Intelligent marking for easy part number and minimum thickness identification

Fits select 1998-2002 Acura CL and Honda Accord models.

Brembo Premium UV Coated rotors are engineered as direct-fit replacements that meet or exceed original equipment standards. These rotors feature a solvent-free UV coating that provides superior corrosion resistance across the entire disc surface, including the braking plate. Constructed from high-carbon cast iron where applicable, they effectively minimize noise and vibration to ensure a smooth, quiet driving experience and maximum braking comfort.

Every rotor includes a fixing screw kit containing the necessary hardware for a straightforward, worry-free installation. For simplified maintenance tracking, Brembo utilizes an intelligent marking system to display the part number and minimum thickness directly on the rotor edge. To ensure optimal performance and safety, it is recommended to replace brake pads and rotors simultaneously.

• Direct OE-equivalent replacement for factory braking performance
• Environmentally friendly, solvent-free UV coating protects against corrosion
• High-carbon cast iron construction reduces NVH (noise, vibration, and harshness)
• Includes fixing screw kit with necessary mounting hardware
• Intelligent marking displays part number and minimum wear thickness
• Designed for use with Brembo NAO, Ceramic, or Low-Met brake pad formulations
• Manufacturer Part Number: 09.6753.21

Fits select 1999-2008 Porsche 911 models, including Carrera, Carrera S, Turbo, GT2, GT3, and Targa trims.

The Brembo Premium UV Coated rotor is a direct-replacement rear disc engineered to meet or exceed original equipment standards. This rotor features a specialized, solvent-free UV coating applied to the hub, outer edges, and braking surfaces to provide superior corrosion resistance and a clean aesthetic. To ensure smooth operation, it is manufactured using High Carbon cast iron which improves thermal damping, effectively minimizing noise and vibration during deceleration.

This rotor includes an intelligent marking system that clearly displays the part number and minimum thickness, making maintenance intervals easy to track. For a complete brake service, Brembo recommends pairing these rotors with their Ceramic or Low-Met brake pad formulations.

• Manufacturer Part Number: 09.6665.11
• Position: Rear
• Material: High Carbon cast iron for reduced vibration and enhanced comfort
• Finish: Solvent-free UV coating for long-lasting protection
• Included Hardware: Fixing screw kit for a simplified installation
• Fitment Type: Direct OE replacement

Fits 1990-1996 Nissan 300ZX 2+2, Base, and Turbo models.

Brembo UV Coated rotors are engineered as premium direct replacements that meet or exceed original equipment standards. These rotors feature an environmentally friendly, solvent-free UV coating that provides comprehensive protection against corrosion on the disc surfaces and the hub. The high carbon cast iron construction is utilized to minimize noise and vibration while maximizing thermal capacity for enhanced driving comfort and consistent braking performance.

• Corrosion Resistance: Solvent-free UV coating protects the disc and hub surfaces for a cleaner appearance and longer service life.
• High Carbon Metallurgy: Reduces brake judder and harmonic noise while improving heat dissipation under load.
• Simple Installation: Includes a fixing screw kit with all necessary hardware for a direct-fit replacement.
• Intelligent Marking: Permanent part number and minimum thickness (Min TH) markings are etched into the rotor for easy identification and safety inspection.
• Manufacturer Part Number: 09.5931.10

To ensure optimal braking performance and even wear, Brembo recommends replacing rotors and pads simultaneously. These rotors are designed to pair with Brembo NAO/Ceramic or Low-Metallic brake pad formulations.

Fits 1993-1997 Toyota Land Cruiser and 1996-1997 Lexus LX450 (Base).

Brembo UV Coated rotors are engineered as direct-fit replacements that meet or exceed original equipment standards. These rotors feature an environmentally friendly, solvent-free UV coating that covers the entire disc, including the braking surfaces, providing superior corrosion protection compared to traditional oil-based coatings. The finish ensures the rotor remains protected from oxidation during shipping and after installation.

• High-carbon cast iron construction (where applicable) to minimize noise, vibration, and harshness (NVH) while enhancing driving comfort.
• UV-cured coating provides complete protection against corrosion for long-lasting durability.
• Intelligent marking locations clearly display the part number and minimum thickness for easier maintenance.
• Includes a fixing screw kit with necessary hardware for a complete, professional installation.
• Optimized metallurgy designed to restore factory braking performance and heat dissipation.
• Manufacturer Part Number: 09.5914.10

For consistent braking performance, Brembo recommends replacing rotors in pairs and installing new pads simultaneously to ensure a proper bedding process and even wear across the axle.

Fits 1990-1993 Mazda Miata (Base, LE, and SE models).

Brembo UV Coated rotors are engineered as premium, direct-replacement discs that meet or exceed original equipment standards. These rotors feature a solvent-free, environmentally friendly UV coating that provides superior corrosion resistance across the entire disc, including the braking surfaces, ensuring a clean appearance and long-lasting durability through varying thermal cycles.

Constructed with high-carbon cast iron where applicable, these rotors are designed to minimize noise and vibration while maximizing thermal capacity for enhanced driving comfort and consistent stopping power. To assist with maintenance, each rotor includes intelligent markings for quick identification of the part number and minimum thickness specifications.

• Direct OE Replacement: Precision-machined to factory tolerances for a seamless installation on the front axle.
• UV Coating: Comprehensive solvent-free protective layer resists rust and environmental degradation.
• High Carbon Metallurgy: Optimizes thermal damping to reduce judder and operating noise.
• Complete Hardware: Includes a fixing screw kit with the necessary hardware for a worry-free service.
• Manufacturer Part Number: 09.5869.14

For optimal braking performance, Brembo recommends replacing rotors and pads simultaneously using NAO/Ceramic or Low Met formulations.

Fits 2012-2017 Fiat 500 models including Abarth, Turbo, Pop, Lounge, Sport, and 500e.

Brembo UV Coated rotors are engineered as a direct-fit replacement that meets or exceeds original equipment standards. These rotors feature a specialized, solvent-free UV coating that protects non-friction surfaces against corrosion, including the hub and outer edges. Constructed with high-carbon cast iron where applicable, this rotor (MPN 09.5843.11) is designed to improve thermal capacity and dampen noise and vibration (NVH) for enhanced driving comfort. For a complete brake service, Brembo recommends pairing these rotors with their NAO/Ceramic or Low-Met brake pad formulations.

• Direct OE-equivalent replacement for front braking systems
• Solvent-free UV coating provides superior protection against corrosion and environmental factors
• High-carbon cast iron construction reduces noise and vibration while managing heat
• Includes a fixing screw kit with necessary hardware for a secure installation
• Integrated intelligent marking displays the part number and minimum thickness specifications
• Manufacturer Part Number: 09.5843.11

Fits select 1993-2004 Volvo 850, 940, 960, C70, S70, S90, V70, and V90.

Brembo Premium UV Coated rotors are engineered as direct-replacement components that match or exceed original equipment specifications. These rotors feature a high-carbon cast iron construction to optimize thermal stability and reduce noise, vibration, and harshness (NVH). The environmentally friendly, solvent-free UV coating provides comprehensive corrosion protection across the entire disc, including the hub and outer rim, ensuring a long-lasting, clean appearance behind the wheels.

• High-Carbon Material: Minimizes brake judder and vibration for a quieter, smoother driving experience.
• Solvent-Free UV Coating: Full protection of the disc surface without the use of harmful chemical solvents.
• Intelligent Marking: Part number and minimum thickness are clearly stamped for easy identification and safety inspections.
• Included Hardware: Comes with a fixing screw kit for a simplified, professional installation.
• OE Precision: Designed to maintain factory tolerances and cooling efficiency.

Brembo recommends replacing pads and rotors together to restore maximum braking performance. This rotor (MPN 09.5568.21) is compatible with Brembo NAO, Ceramic, or Low-Met brake pad formulations.

Fits select 1990-2001 Acura Integra and 1990-2005 Honda Civic and Civic del Sol models.

Brembo Premium Xtra rotors are engineered as high-performance direct replacements that meet or exceed OE specifications. These rotors feature a cross-drilled design to improve initial bite, dissipate heat, and clear debris from the pad surface during braking. The solvent-free UV coating provides superior corrosion protection across the entire disc, including the braking plate surfaces, while maintaining an environmentally friendly manufacturing process.

• High Carbon cast iron construction (where applicable) to minimize noise and vibration for improved driving comfort.
• Cross-drilled ventilation holes for optimized cooling and performance in wet conditions.
• Protective UV coating prevents oxidation and maintains a clean, premium appearance behind the wheels.
• Intelligent marking locations for easy identification of the part number and minimum thickness.
• Includes a fixing screw kit with necessary hardware for a straightforward installation.
• Manufacturer Part Number: 09.5509.1X

For optimal braking performance, Brembo recommends replacing rotors and pads together. Pair these UV Coated rotors with Brembo NAO/Ceramic or Low Met brake pad formulations for a complete system restoration.

Fits 1990-2005 Acura Integra, Honda Civic, and Honda Civic del Sol.

Brembo Premium UV Coated rotors are engineered as direct-fit replacements that meet or exceed original equipment standards. These rotors feature an environmentally friendly, solvent-free UV coating that provides superior corrosion protection across the entire disc, including the hub and braking surfaces. Utilizing high-carbon cast iron, these rotors are designed to minimize noise and vibration (NVH) while enhancing heat dissipation for consistent braking performance and driving comfort.

• Manufacturer Part Number: 09.5509.11
• Placement: Front
• UV Coating: Advanced solvent-free finish resists corrosion and protects plate surfaces.
• High Carbon Content: Specialized metallurgy reduces vibration and provides maximum performance.
• Hardware Included: Comes with a fixing screw kit for a simple, worry-free installation.
• Intelligent Marking: Part number and minimum thickness are clearly etched for easy identification and maintenance.

Fits 2002-2006 Acura RSX and select 2004-2015 Honda Civic and CR-Z models.

Brembo Premium Xtra rotors are engineered as a high-performance direct replacement that meets or exceeds original equipment specifications. Featuring a distinctive cross-drilled pattern, these rotors enhance initial bite and provide continuous cleaning of the brake pad surface. The specialized drilling helps dissipate heat and vent gases more efficiently than standard discs, maintaining consistent pedal feel during demanding driving conditions.

Each rotor is treated with an environmentally friendly, solvent-free UV coating, providing comprehensive corrosion protection across the entire disc surface. Constructed from high-carbon cast iron, the 09.5457.3X rotor minimizes thermal distortion and reduces noise, vibration, and harshness (NVH) for a smoother, quieter ride. To ensure a professional installation, every rotor includes a fixing screw kit and intelligent markings for easy identification of part numbers and minimum thickness limits.

• Manufacturer Part Number: 09.5457.3X
• Position: Front
• Design: Cross-Drilled Ventilated Disc
• Finish: Protective UV Coating
• Material: High Carbon Cast Iron
• Hardware: Fixing screw kit included

Fits select 2002-2015 Acura RSX, Honda Civic, and Honda CR-Z.

Brembo Premium UV Coated rotors are engineered as high-quality direct replacements that meet or exceed original equipment specifications. The solvent-free, environmentally friendly UV coating provides superior corrosion protection across the entire disc, including the braking plate surfaces. To ensure a quiet and comfortable ride, these rotors are constructed using high-carbon cast iron (where applicable) to minimize noise and vibration while maximizing heat dissipation.

Each rotor features intelligent marking, allowing for quick identification of the part number and minimum thickness. Brembo includes a fixing screw kit with the necessary hardware to facilitate a straightforward, bolt-on installation. For optimal braking performance and safety, it is recommended to replace rotors and pads as a complete set.

• Manufacturer Part Number: 09.5457.31
• Position: Front
• Finish: Solvent-free UV coating for enhanced durability
• Construction: High-carbon cast iron (where applicable)
• Installation: Direct OE replacement; fixing screw kit included
• Maintenance: Integrated part number and minimum thickness markings

Fits select 1990-1997 Mercedes-Benz 300SL, 500E, 500SL, E500, SL320, and SL500 models.

Brembo UV Coated rotors are engineered as premium direct-fit replacements that meet or exceed original equipment standards. These rotors feature a specialized, solvent-free UV coating applied to the entire disc, including the braking plate surfaces, providing superior corrosion resistance. Many applications utilize high-carbon cast iron to improve thermal capacity, which minimizes noise and vibration for a quieter, more comfortable driving experience.

Each rotor is manufactured with intelligent marking that clearly displays the part number and minimum thickness directly on the casting for easy maintenance. To ensure a straightforward installation, Brembo includes a fixing screw kit with the necessary hardware.

• Manufacturer Part Number: 09.5373.20
• Position: Front
• Material: High Carbon Cast Iron (where applicable)
• Finish: Solvent-free UV Coating
• Includes: Fixing screw kit for installation
• Features: Direct OE-equivalent replacement

Fits 1990-1997 Honda Accord and 1997 Acura CL models.

Brembo UV Coated rotors are engineered as a premium direct replacement that meets or exceeds OE specifications. These rotors feature a solvent-free, environmentally friendly UV coating that provides comprehensive protection against corrosion on all surfaces, including the braking plate. This ensures the disc remains visually clean and structurally sound throughout its service life.

Constructed with high-carbon cast iron where applicable, these rotors are designed to minimize noise and vibration (NVH) while enhancing thermal capacity for improved driving comfort and consistent performance. Each rotor includes an integrated fixing screw kit with the necessary hardware for a straightforward installation. For optimal safety and performance, Brembo recommends replacing rotors and pads as a complete set.

• Manufacturer Part Number: 09.5290.14
• Position: Front
• Material: High-carbon cast iron for reduced judder and noise.
• Coating: Solvent-free UV coating for superior corrosion resistance.
• Intelligent Marking: Permanent laser etching of the part number and minimum thickness for easy inspection.
• Hardware Included: Fixing screw kit provided for a secure fit.

Fits select 1990-2000 Honda Civic, Civic del Sol, and CRX models.

The Brembo Premium UV Coated brake rotor (09.5285.11) is engineered as a direct replacement that meets or exceeds original equipment specifications. This front rotor features an environmentally friendly, solvent-free UV coating that provides superior corrosion resistance across the entire disc, including the braking plate surfaces, ensuring a long-lasting clean appearance and reliable performance.

Constructed from high-carbon cast iron where applicable, these rotors are designed to minimize noise and vibration while maximizing thermal capacity for enhanced driving comfort. For easier maintenance, each rotor includes intelligent markings that clearly display the manufacturer part number and the minimum service thickness. To ensure a straightforward installation, Brembo includes a fixing screw kit with the necessary hardware to replace your worn factory components.

• Manufacturer Part Number: 09.5285.11
• Position: Front
• Finish: Solvent-free UV coating for enhanced corrosion protection
• Material: High Carbon cast iron to reduce judder and noise
• Installation: Direct OE replacement with included fixing screw kit
• Maintenance: Etched part number and minimum thickness indicators

Brembo recommends replacing rotors and pads together to restore optimal braking performance and ensure even wear. This rotor is fully compatible with Brembo NAO, Ceramic, or Low-Met brake pad formulations.

Fits select 1984-1993 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is, and 325iX (E30).

Brembo UV Coated rotors are engineered as direct-fit replacements that meet or exceed original equipment specifications. These rotors feature an environmentally friendly, solvent-free UV coating that provides superior corrosion resistance across the entire disc, including the braking plate surfaces. To ensure a quiet and comfortable ride, Brembo utilizes high carbon cast iron where applicable to minimize noise, vibration, and harshness (NVH) while optimizing thermal capacity.

Every rotor includes a fixing screw kit with the necessary hardware for a straightforward installation, restoring your vehicle's factory braking feel and performance. For maximum effectiveness, Brembo recommends replacing rotors and pads simultaneously. Each disc features intelligent marking that clearly displays the part number and minimum thickness for future service reference.

• MPN: 09.4883.10
• Material: High Carbon cast iron for enhanced thermal stability
• Finish: Solvent-free UV coating for long-lasting corrosion protection
• Installation: Includes fixing screw kit for direct replacement
• Location: Front Axle

Fits select 1975-1993 Volvo 240, 242, 244, 245, 262, 264, and 265 models.

This Brembo UV Coated front brake rotor is engineered as a direct OE-equivalent replacement to restore factory braking performance and pedal feel. Unlike standard rotors, this disc features an environmentally friendly, solvent-free UV coating that provides superior protection against corrosion across the entire surface. Its high-carbon cast iron construction is specifically designed to maximize thermal capacity, which minimizes noise, vibration, and harshness (NVH) while preventing rotor warping under heat.

• Solvent-free UV coating offers long-lasting corrosion resistance on all surfaces
• High-carbon metallurgy reduces brake squeal and improves heat dissipation
• Intelligent marking indicates the part number and minimum thickness for easy maintenance
• Includes fixing screw kit with necessary hardware for a straightforward installation
• Manufacturer Part Number: 09.4629.10

Fits select 2006-2012 Mercedes-Benz ML320, ML350, ML450, ML500, R320, R350, and R500.

Brembo Premium UV Coated rotors are engineered as a direct replacement that meets or exceeds OE specifications. These rotors feature a specialized, solvent-free UV coating applied to the entire disc, including the braking plate surfaces. This coating provides superior corrosion protection while maintaining an environmentally friendly manufacturing process.

To ensure smooth operation and driving comfort, these rotors utilize high-carbon cast iron to dampen noise and minimize vibration. For ease of maintenance, Brembo includes an intelligent marking location on the rotor that displays the part number and minimum thickness. Each rotor comes with a fixing screw kit, providing all necessary hardware for a straightforward installation.

• Direct OE Replacement: Designed to factory dimensions for a precise fit.
• UV Coating: Comprehensive protection against corrosion and environmental wear.
• High-Carbon Material: Reduces NVH (Noise, Vibration, and Harshness) for quieter braking.
• Maintenance Ready: Minimum thickness and part number markings etched into the casting.
• Hardware Included: Comes with the required fixing screw kit.
• Manufacturer Part Number: 08.R101.11