Features Powers 5-8 Pod SS5 CrossLink Pro Lightbars. Connects directly to the battery to power your LED pods. High capacity 10AWG wiring. Single Deutsch DT-P output connector. 60A waterproof fuse, and 80A 12V relay to safeguard the electrical systems in your pods. Overview Stage Series. This harness has been designed specifically to safely power CrossLink Pro Lightbars with five (5) or more SS5 Pro LED Pods. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. You have the option to control your pods using the included three-way switch to toggle between the backlight, off, and the main beam, or control them through your Auxiliary Switch Bank with the included adapter. This harness uses high capacity 10AWG wiring and a Deutsch DT-P connector for simple plug-and-play installation. This harness safely powers up to 45A of auxiliary lamps. The SS5 Pro draws 6.7A per pod. Compatibility. Please note that this harness has a DT-P size output connector. This is intended to connect to a corresponding Ultra-Heavy-Duty (UHD) SS5 Splitter harness, to build a multi-pod lightbar. This connector will not plug directly into any LED product offered by Diode Dynamics.

• 60A waterproof fuse and 80A 12V relay to safeguard the electrical systems in your pods
• 60A waterproof fuse and 80A 12V relay to safeguard the electrical systems in your pods
• Connects directly to the battery to power your LED pods
• Powers 5-8 Pod SS5 CrossLink Pro Lightbars
• Single Deutsch DT-P output connector
• High capacity 10AWG wiring

Features Powers Diode Dynamics LED pods with backlight functionality. Connects directly to the battery to power your LED pods. High capacity 14AWG wiring. Single Deutsch DT output connector. 30A waterproof fuse, and 60A 12V relay to safeguard the electrical systems in your pods. Overview Stage Series. This harness is intended to be used with our Stage Series LED Pods with backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a three-way switch to toggle between the backlight, off, and the main beam. This harness uses high capacity 14AWG wiring and a Deutsch DT connector for simple plug-and-play installation. This harness safely powers up to 25A of auxiliary lamps. Please refer to the current draw data below. C1 Sport: 1.2A C1 Pro: 1.7A SSC2 Sport: 0.6A SSC2 Pro: 1.75A SS5 Sport: 2.8A SS5 Pro: 6.7A Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• Powers Diode Dynamics LED pods with backlight functionality
• Connects directly to the battery to power your LED pods
• 30A waterproof fuse and 60A 12V relay
• Single Deutsch DT output connector
• High capacity 14AWG wiring

Features Powers Diode Dynamics lights with backlight functionality. Connects to vehicle wiring for simple everyday operation of lights. High capacity 14AWG and 18AWG wiring. Dual Deutsch DT output connectors. 10A waterproof fuse to safeguard the electrical systems in your lights. Overview Easy Operation. This wiring harness allows you to connect your Diode Dynamics lights with backlight functionality to your vehicle's wiring for simple everyday operation. When paired with our LED pods with a white main beam and red backlight this harness allows your lights to operate as an additional red accent light with your tail lights and then automatically switches to a high-power backup light when your vehicle is in reverse. The included toggle switch allows you to override the vehicle signals and turn on the main beam anytime. Experience. After over a decade in business Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors we assemble and engineer products in the United States for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• 10A waterproof fuse to safeguard the electrical systems in your lights
• Connects to vehicle wiring for simple everyday operation of lights
• Powers Diode Dynamics lights with backlight functionality
• Dual Deutsch DT output connectors
• High capacity 14AWG wiring

Features Powers Diode Dynamics LED pods with backlight functionality. Connects directly to the battery to power your LED pods. High capacity 14AWG wiring. Dual Deutsch DT output connectors. 30A waterproof fuse, and 60A 12V relay to safeguard the electrical systems in your pods. Overview Stage Series. This harness is intended to be used with our Stage Series pods with backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a three-way switch to toggle between the backlight, off, and the main beam. This harness uses high capacity 14AWG wiring and Deutsch DT connectors for simple plug-and-play installation. This harness safely powers up to 25A of auxiliary lamps. Please refer to the current draw data below. C1 Sport: 1.2A C1 Pro: 1.7A SSC2 Sport: 0.6A SSC2 Pro: 1.75A SS3 Non-Backlit Sport: 2.9A SS3 Non-Backlit Pro: 1.2A SS3 Non-Backlit Max: 3.3A SS3 Backlit Sport: 1.06A SS3 Backlit Pro: 2.87A SS5 Sport: 2.8A SS5 Pro: 6.7A Control through OEM Aux Switches. This harness includes an OEM aux switch adapter wire that allows you to control your lights using a factory-installed aux switch bank. Two switches will be used - one for the main beam, and one for the backlight. For those who don't have the aux switch bank, you will use the included toggle switch adapter wire to mount a switch.

• 25A waterproof fuse and 60 amp 12V relay to safeguard the electrical systems in your offroad lighting
• Connects directly to the battery to power your offroad lighting
• battery to power your offroad lighting
• Black wire sheathing to protect cables
• Dual Deutsch DT output connectors
• Connects directly to the&nbsp
• High capacity 14AWG wiring

Overview Stage Series. This harness is intended to be used with our Stage Series pods with backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a three-way switch to toggle between the backlight, off, and the main beam. This harness uses high capacity 16AWG wiring and Deutsch DT connectors for simple plug-and-play installation. This harness safely powers up to 6A of auxiliary lamps. Please refer to the current draw data below. C1 Sport: 1.2A C1 Pro: 1.7A SSC2 Sport: 0.6A SSC2 Pro: 1.75A SS3 Sport Main Beam: 1.1A, Backlight: 0.03A SS3 Pro Main Beam: 2.7A, Backlight: 0.03A SS3 Max Main Beam: 3A, Backlight: 0.03A Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• Connects directly to the battery to power your offroad lighting
• 15A to safeguard the electrical systems in your offroad lighting
• battery to power your offroad lighting
• Black wire sheathing to protect cables
• Dual Deutsch DT output connectors
• Connects directly to the&nbsp
• High capacity 18AWG wiring

Features Compatible with LED bulbs. Prevents hyperflash errors. Simple swap for original module. Direct fitment and proper sizing. Flasher Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as "hyperblinking," even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out! To slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking. Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.

• Direct fitment and proper sizing
• Simple swap for original module
• Prevents hyperflash errors
• Compatible with LED bulbs

This Part Fits:

Features Automotive grade butyl sealant. Easy to work with, no sticky mess. Standard black color 20 feet long (enough to reseal two large headlamps). 7mm diameter, designed to fit directly in headlamp channels. Overview Easy to work with.Properly reseal any headlamp or tail lamp and protect against moisture ingress with Diode Dynamics Butyl Headlight Sealant! This new and improved sealant rope was designed specifically for headlamps, with a firmer composition than auto-store windshield glue. This makes it easy to work with, without causing a sticky mess. Each roll comes with 20 feet of butyl, enough to reseal two large headlamps.

• 7mm diameter designed to fit directly in headlamp channels
• 20 feet long (enough to reseal two large headlamps)
• Easy to work with no sticky mess
• Standard black color

Overview Stage Series.This harness is intended to be used with our Stage Series light bars and pods without backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a two-way toggle switch and uses high capacity 14AWG wiring and Deutsch DT connectors for simple plug-and-play installation.This harness safely powers up to 25A of auxiliary lamps. Please refer to the current draw data below.SS3 Sport: 1.1ASS3 Pro: 2.7ASS3 Max: 3ASS6 Light Bar: 1.9ASS12 Light Bar: 4.2ASS18 Light Bar: 5.7ASS30 Light Bar: 9.8ASS42 Light Bar: 16ASS50 Light Bar: 18.5AExperience. After over a decade in business Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors we assemble and engineer products in the United States for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• Powers up to two Diode Dynamics 50'' 42'' 30 and 18 Stage Series light bars"
• Powers up to two Diode Dynamics 50'' 42'' 30 and 18" Stage Series light bars
• Connects directly to the battery to power your light bar
• Black wire sheathing to protect cables
• Dual Deutsch DT output connectors
• High capacity 14AWG wiring

Powers up to two Diode Dynamics 12 or 6 Stage Series light bars. Connects directly to the battery. High capacity 18AWG wiring. Dual Deutsch DT output connectors. 15A waterproof fuse to safeguard the electrical systems in your light bar."

• 15A waterproof fuse to safeguard the electrical systems in your light bar
• Powers up to two Diode Dynamics 12 or 6" Stage Series light bars
• Powers up to two Diode Dynamics 12 or 6 Stage Series light bars"
• Connects directly to the battery to power your light bar
• Dual Deutsch DT output connectors
• High capacity 18AWG wiring

Power up to one Diode Dynamics 50'' 42'' 30 and 18 light bar. Connects directly to the battery. High capacity 14AWG wiring. Dual Deutsch DT output connectors. Black wire sheathing to protect cable. 25A waterproof fuse and 60 amp 12V relay."

• Powers up to one Diode Dynamics 50'' 42'' 30 and 18" Stage Series light bar
• Diode Dynamics 50'' 42'' 30 and 18 Stage Series light bar"
• Connects directly to the battery to power your light bar
• Black wire sheathing to protect cables
• Dual Deutsch DT output connectors
• High capacity 14AWG wiring
• Powers up to one&nbsp

Prevents hyperblinking caused by installing LED bulbs. Includes everything needed for installation. 3-year warranty.

• Prevents hyperblinking caused by installing LED bulbs
• Includes everything needed for installation
• 3-year warranty

Features Adds unique, programmable functions Compatible with LED or standard bulbs, no hyperflash Plug and play swap for original module Assembled in USA, 3 year warranty A Smarter Flasher The SmartTap™ is a replacement turn signal flasher relay, compatible with any vehicle using a CF18 (LM449) Flasher. With plug-and-play installation, it offers a lot more than your average relay: an embedded microcontroller is loaded with exclusive software, which adds new features to your vehicle! You can program the features just the way you'd like, with the help of the included programming guide. Tap-to-Signal: Anytime the turn signal is tapped, the turn signal will blink a number of times automatically. This one-touch signaling is a convenient way to signal other drivers when switching lanes. The number blinks is programmable, to make it as long or short as you'd like. Unique Hazard Functions: The SmartTap™ has built-in strobe, slo-mo and wig-wag hazard functions to help your vehicle stand out when the hazards are on. Apply these functions on their own, together, or with the strobe setting for a total of eight unique hazard functions! Arrival and Departure Modes: When the lock or unlock button is pressed, your turn signals will stay on in a steady glow, for better visibility when approaching or leaving the vehicle at night. The lighting time can be adjusted from 10-90 seconds for additional illumination, or disabled if desired. This product was designed, programmed, and assembled by Diode Dynamics, in St. Louis, Missouri, USA.

• Direct fitment and proper sizing
• Simple swap for original module
• Prevents hyperflash errors
• Compatible with LED bulbs

This Part Fits:

Features Compatible with LED bulbs. Prevents hyperflash errors. Simple swap for original module. Direct fitment and proper sizing. Flasher Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as "hyperblinking," even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out! To slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking. Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.

• Direct fitment and proper sizing
• Simple swap for original module
• Prevents hyperflash errors
• Compatible with LED bulbs

This Part Fits:

Features Compatible with LED bulbs. Prevents hyperflash errors. Simple swap for original module. Direct fitment and proper sizing. Flasher Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as "hyperblinking," even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out! To slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking. Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.

• Direct fitment and proper sizing
• Simple swap for original module
• Prevents hyperflash errors
• Compatible with LED bulbs

This Part Fits:

Features Converts your tail light to also function as the turn signal. OEM tail light connectors for simple plug-and-play installation. Assembled in USA. Overview Custom Appearance. This kit is compatible with Subaru WRX 2022-2025 and will convert the LED tail light to also function as the turn signal. This kit will instantly customize your vehicle for a much more modern appearance on the road! This module does not include the option to convert your old turn signal location into additional backup lights. Easy Installation. Using OEM tail light connectors, the base kit is 100% plug-and-play and installs in minutes, with no wiring required. You don't even have to remove your tail lights! Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! What's Included Two (2) modules compatible with Subaru WRX 2022-2025 One (1) Installation Guide

• Gives your vehicle a more modern appearance
• Designed specifically for your vehicle

This Part Fits:

Features Full multicolor and True White functionality with our App. 20 adjustable patterns, plus custom modes, camera match, and audio sync. Easily group multiple controllers. Fully waterproof and shockproof. Overview Full RGBW. Unlike other RGB controllers on the market that produce a mixed white color, this controller is full RGBW, with an independent White channel that gives you a crisp, clean white output for everyday use. Easy Connection. The M8 controller features a fully waterproof, compact polycarbonate enclosure, along with DT input and M8 output connectors for secure connections. Simply plug into any standard 12V signal and connect the outputs directly to your RGBW products. No cutting, crimping, or splicing! This controller also includes a red power indicator LED, mounting tab and mounting pad surface for easy installation. Robust components also allow up to 2A output per channel. App Control. With the Diode Dynamics multicolor app, you can choose any color under the sun, including True White. Preset Patterns and Colors make it easy to use, and Camera Match and Music Sync make it fun to show off! Don't see a pattern you like? Just program your own, and save it for later! Instant Function. Don't wait around to see your lights. This controller will light up immediately to the previous setting when it gets power, no need to access the app. Connecting to the controller takes seconds as well, not minutes. Instant response, instant control, for an excellent user experience. Compatability Works with Diode Dynamics RGBW products with M8 connectors Works with many generic RGBW products (may require JST-to-M8 adapter)

• Controls multicolor functionality of LED accents

Features Converts your tail light to also function as the turn signal. OEM tail light connectors for simple plug-and-play installation. Assembled in USA. Overview Custom Appearance. This kit is compatible with Subaru WRX/STi 2015-2021 and will convert the LED tail light to also function as the turn signal. This kit will instantly customize your vehicle for a much more modern appearance on the road! This module does not include the option to convert your old turn signal location into additional backup lights. Easy Installation. Using OEM tail light connectors, the base kit is 100% plug-and-play and installs in minutes, with no wiring required. You don't even have to remove your tail lights! Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products that will exceed your expectations. Please contact us if you'd like to discuss your lighting project! What's Included Two (2) modules compatible with Subaru WRX/STi 2015-2021 One (1) Installation Guide

• Gives your vehicle a more modern appearance
• Designed specifically for your vehicle

This Part Fits:

Features Compatible with Scion FR-S 10 Series, Monogram, and Release Series models Easy installation, direct plug-and-play Keeps your LED DRLs on at night Input wire included to connect to factory signals, lighting up for lock/unlock and DRL Overview Introducing the Always-On™ module by Diode Dynamics, compatible with Scion FR-S 10 Series, Monogram, and Release Series models! Extra function. From the factory, your special edition FR-S has LED DRLs in the headlight, which come on only when the vehicle is moving, with the headlamps off. This module will allow you to keep them on at night, with your headlights. After installation, the DRLs will illuminate at half brightness when the headlamps are on. The DRLs will illuminate at full brightness, during the day, while driving with the headlights off. Easy installation. Thanks to the OEM connectors, everything is 100% plug-and-play, and installation will only take 5-10 minutes. Just unplug your factory headlamp connectors, and plug the module inline, one on each side of the vehicle. American Made. This product is proudly made in St. Louis, Missouri by Diode Dynamics Manufacturing. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• Gives your vehicle a more modern appearance
• Designed specifically for your vehicle

This Part Fits:

Features Direct replacement for factory OEM HID bulbs. Perfect D3S fitment, no modification needed. True colors, with no variance. Ceramic base for heat protection. Overview OEM Replacement. If your vehicle is equipped with HIDs, these are a perfect direct replacement. Since HID bulbs lose brightness after just a few months of use, these will provide a nice increase in output. You can also improve your vehicle's styling with a cooler color temperature. Quality. There HID bulbs provide the best combination of quality, without a high price tag. Manufactured in a fully automated environment, they have high output, and are DOT/SAE and ECE compliant in arc position and size. Using German quartz and American salts, no expense is spared in their construction. This leads to a long, reliable life, and excellent color. True Colors. While some HIDs on the market give off a green or purple tint, these bulbs will provide a pure white color on the road. These HIDs are available in true, accurate color temperatures, which we measure at our photometric test lab. The white color created by these bulbs will provide more visible light on the road, and won't cause distraction. 4300K is a natural white output, as seen on vehicles with factory HIDs. It will not have any blue tint to its color, and might appear slightly warm. 5000K is a pure white output, without any warm hint, and no tint of blue either. 6000K is our most popular color, which produces an ice white color. It matches best with most LEDs. 8000K is our highest temperature, which produces an ice blue color. This is not a strong blue color though - it is still primarily white, meaning there will be no decrease in light output.

• Direct replacement for your factory bulb
• Direct replacement for yourfactory bulb
• Ceramic base for heat protection
• True colors with no variance
• Flicker-Free performance

This Part Fits:

Features Direct plug-and-play replacement bulb. Available in white or selective yellow. Automotive-grade LEDs for superior performance. Fanless design provides high reliability. Backed by limited lifetime warranty. Designed and engineered in USA (Patents Pending). Introducing the SL2 LED Bulb! As a replacement for our popular SLF bulb, the SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance. Optimized Optical Focus. Don't be fooled by high lumen numbers. Your vehicle's fog lights are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility. Fanless Design. The SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan. NOTE: LED bulbs are legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. International legality varies by country.

• Molded construction with sturdy double terminals
• Direct replacement for your factory bulb
• Increased output with LED Appearance
• Plug and play simple installation

This Part Fits:

Features Advanced TST LED Technology for industry-leading performance. Internal cooling for superior reliability. Fully integrated design, no wires or external drivers. Direct replacement bulb with compact fitment. Backed by limited lifetime warranty. Designed and engineered in USA (Patents Pending). Introducing the SL2 Pro LED Bulb! As a replacement for the popular SL1 LED bulb, the new SL2 Pro LED features some major upgrades: next-generation TST LED technology, an integrated top-mount fan, and a fully-integrated, wire-free design. As a direct plug-and-play replacement, it provides a significant increase in output, in a compact package. Next-Generation TST Technology. The SL2 Pro features new thermal separation technology (TST) LEDs. TST LEDs are designed with electrical connections on the top which lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus. Correct Optical Focus. The SL2 Pro LED bulb was engineered to focus light just like your original bulb, matching the original beam pattern while providing an increase in total output. Instead of using the smallest LEDs possible which can lead to streaks, lines, and harsh cutoffs, the SL2 Pro was optimized to provide a smooth beam pattern, while maintaining focus. Internal Cooling. The SL2 Pro features an integrated top-mounted fan which provides maximum cooling efficiency, superior thermal management and long-term reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. NOTE: LED bulbs are legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. International legality varies by country.

• Molded construction with sturdy double terminals
• Direct replacement for your factory bulb
• Increased output with LED Appearance
• Plug and play simple installation

This Part Fits: