The DS18 ZR1000.1D ZR Series monoblock amplifier is engineered to deliver substantial power for high-performance subwoofer systems. Utilizing a high-efficiency Class D circuit design, this amplifier generates significant output while maintaining a compact footprint and lower operating temperatures compared to traditional Class A/B designs.

Capable of providing 1000W RMS at a 1-ohm load, the ZR1000.1D offers the flexibility needed to drive complex multi-subwoofer setups or heavy-duty single drivers. Its monoblock configuration is specifically optimized for low-frequency reproduction, ensuring tight, controlled bass response for your vehicle's audio system.

• Manufacturer Part Number: ZR1000.1D
• Power Output (1-Ohm): 1000W RMS
• Power Output (2-Ohm): 650W RMS
• Power Output (4-Ohm): 380W RMS
• Amplifier Class: Class D
• Channels: 1 (Monoblock)

Engineered in collaboration with car audio pioneer Steve Meade, the DS18 SMD-2000.1D is a high-efficiency Class D monoblock amplifier designed to drive demanding subwoofer systems. This 1-channel powerhouse provides exceptional thermal management and stability across various impedance loads, making it an ideal choice for custom SQL and SPL installations.

• Product Model: SMD-2000.1D
• Amplifier Class: Class D
• Number of Channels: 1 (Monoblock)
• Power Output at 1-Ohm: 2000 Watts
• Power Output at 2-Ohms: 1400 Watts
• Power Output at 4-Ohms: 800 Watts
• Features: Integrated LED lighting for custom aesthetic installations

Built to the exacting standards of the Steve Meade Collaboration series, this amplifier delivers consistent, high-fidelity bass reinforcement while maintaining the power efficiency inherent to Class D circuitry. Its compact footprint and reliable power delivery ensure it can handle the rigorous demands of high-output car audio environments.

The DS18 Select Series SLC8S 8-inch subwoofer is engineered to provide punchy, accurate low-frequency response in space-constrained installations. This driver is an ideal choice for car audio enthusiasts looking to add significant bass depth without sacrificing an entire trunk or cargo area.

Rated at 200 Watts RMS, the SLC8S features a single 4-ohm voice coil (SVC) configuration, offering straightforward wiring compatibility for most standard monoblock and multi-channel amplifiers. As part of the Select series, this component focuses on delivering reliable daily performance and consistent thermal management during extended listening sessions.

• Manufacturer Part Number: SLC8S
• Diameter: 8 inches
• Power Handling: 200 Watts RMS
• Impedance: 4-Ohm
• Configuration: Single Voice Coil (SVC)

The DS18 PRO-X10.4M is a high-performance 10-inch mid-range loudspeaker engineered for high-output car audio environments. Designed to deliver exceptional clarity at high volume levels, this driver provides the power handling and efficiency required for professional-grade sound stages and custom acoustic builds.

• Manufacturer Part Number: PRO-X10.4M
• Speaker Size: 10 inches
• Power Handling: 300 Watts RMS
• Nominal Impedance: 4 Ohms
• Type: Mid-range loudspeaker

This component is built to withstand the rigors of high-intensity playback, making it an ideal choice for enthusiasts looking to upgrade their vehicle's mid-frequency response with a reliable, high-wattage solution.

The DS18 PRO-CF69.4NR is a high-output 6x9-inch mid-bass loudspeaker designed for professional-grade automotive audio systems. Engineered with a powerful neodymium magnet, this speaker provides superior sensitivity and punchy mid-range response in a lightweight package compared to traditional ferrite-magnet alternatives.

This loudspeaker is built to sustain high volume levels with a continuous power handling of 300 Watts RMS at a 4-ohm impedance. It serves as a precise solution for listeners looking to fill the mid-frequency gap in high-performance builds, offering the thermal management and durability required for sustained, high-decibel audio reproduction.

• Manufacturer Part Number: PRO-CF69.4NR
• Dimensions: 6x9 inches
• Power Handling: 300 Watts RMS
• Nominal Impedance: 4 Ohms
• Magnet Type: Neodymium
• Category: Mid-Bass Loudspeaker

Engineered for high-output audio systems, the DS18 PRO-CF6.2NR is a 6.5-inch mid-bass loudspeaker designed to deliver punchy, accurate mid-range response with professional-grade clarity. Utilizing a powerful neodymium magnet structure, this driver provides exceptional motor strength in a lightweight, compact form factor, making it ideal for custom installations where space and weight are critical factors.

The PRO-CF6.2NR is built to handle sustained high-volume playback, featuring a 250W RMS power rating. Its 2-ohm impedance allows for maximum power extraction from compatible amplifiers, ensuring your mid-bass frequencies remain tight and impactful. Whether used in a multi-way pro-audio style car setup or a high-performance marine installation, this loudspeaker is designed for those who demand high SPL without sacrificing tonal quality.

• Model: PRO-CF6.2NR
• Size: 6.5 inches
• RMS Power Handling: 250 Watts
• MAX Power Handling: 500 Watts
• Impedance: 2 Ohm
• Magnet Material: Neodymium
• Type: Mid-Bass Loudspeaker

Upgrade your vehicle's audio system with the DS18 DXQ3.5 Deluxe Quality 3.5-inch full range speaker. Designed for precise audio reproduction, this speaker features a specialized yellow straw and composite foam cone. This material combination provides the necessary rigidity to prevent distortion while remaining lightweight enough for high-frequency responsiveness, ensuring clear and balanced sound across the entire range.

The DXQ3.5 is engineered for versatility, making it an excellent choice for dashboard, pillar, or door locations where a 3.5-inch driver is required. With a robust 60W RMS power rating and a standard 4-ohm impedance, it handles significant power while maintaining the clarity expected from the DXQ series.

• Speaker Type: 3.5" Full Range
• RMS Power Handling: 60 Watts
• Impedance: 4 Ohm
• Cone Material: Yellow Straw + Composite Foam Cone
• Series: Deluxe Quality (DXQ)
• Part Number: DXQ3.5

The DS18 DSP8.8BT is a precision-engineered digital signal processor designed to give you complete control over complex mobile audio systems. Featuring 8-channel inputs and 8-channel outputs, this unit manages the signal path between your head unit and multiple amplifiers to optimize frequency response and soundstage imaging. The integrated Bluetooth connectivity allows for wireless tuning and parameter adjustments directly from a compatible smartphone or tablet, providing a streamlined alternative to traditional wired configurations.

• Manufacturer Part Number: DSP8.8BT
• Channels: 8-channel high/low-level inputs and 8-channel RCA outputs for maximum system scalability
• Wireless Control: Built-in Bluetooth interface for real-time acoustic tuning via mobile app
• Signal Management: Access to comprehensive 31-band EQ, time alignment, and crossover settings
• Integration: Designed for both OEM system integration and high-end aftermarket builds

Ensure your high-output car audio system receives the current it demands with the DS18 AKIT0.PU Advance Series 0-Gauge Amplifier Installation Kit. This comprehensive wiring solution is designed to handle the high current loads of heavy-duty amplifiers, preventing voltage drops that can lead to distortion and equipment overheating. Featuring a striking purple finish, this kit allows you to maintain a professional look in your engine bay and trunk while providing the necessary gauge thickness for maximum power transfer.

• Advance Series 0-Gauge wiring for high-current power delivery
• High-flex insulation for easier routing through tight chassis locations
• Durable protective coating to resist heat and chemicals
• Complete kit designed for single amplifier installations
• Manufacturer Part Number: AKIT0.PU

The DS18 PRO-FR8NEO is a high-output 8-inch full-range loudspeaker engineered for high-fidelity audio systems that demand both power and precision. By utilizing a neodymium magnet, this speaker achieves high flux density and superior efficiency in a lightweight package, making it an ideal choice for custom automotive installations where mounting weight and motor strength are critical factors.

Built to handle 250W RMS, the PRO-FR8NEO delivers clear, loud sound across a broad frequency spectrum. The 4-ohm impedance allows for versatile wiring configurations with most modern amplifiers. As part of the DS18 PRO series, this driver is designed to maintain thermal stability and performance during extended high-volume play.

• Manufacturer Part Number: PRO-FR8NEO
• Speaker Size: 8 inches
• Power Handling: 250 Watts RMS
• Nominal Impedance: 4 Ohm
• Magnet Type: Neodymium
• Classification: Full Range Loudspeaker

The DS18 PRO-FR6NEO is a high-performance 6.5-inch full range loudspeaker engineered for applications where space and weight are critical factors without sacrificing audio output. By utilizing a powerful neodymium motor, this speaker provides exceptional sensitivity and clarity, making it a professional-grade choice for high-output motorcycle systems, marine applications, and competitive car audio environments.

With a continuous power rating of 225W RMS, the PRO-FR6NEO is built to handle significant amplification while maintaining a clean frequency response. The neodymium magnet structure allows for a much shallower and lighter profile than traditional ferrite magnets, facilitating installation in tight door panels or custom enclosures where every millimeter and ounce counts.

• Manufacturer Part Number: PRO-FR6NEO
• Nominal Diameter: 6.5 inches
• Power Handling: 225 Watts RMS
• Nominal Impedance: 4 Ohms
• Motor Structure: High-grade Neodymium
• Speaker Type: Full Range Loudspeaker

The DS18 PRO-FR69NEO is a high-performance 6x9-inch full-range loudspeaker engineered for audio enthusiasts who demand extreme volume without sacrificing clarity. Utilizing a powerful neodymium magnet, this speaker delivers higher flux density and superior thermal stability while remaining significantly lighter than traditional ferrite-magnet alternatives. This makes it an ideal solution for custom door pods, motorcycle fairings, and high-output car audio builds where weight and space are critical factors.

With a 250W RMS power rating and a 4-ohm impedance, the PRO-FR69NEO is built to handle substantial power, maintaining crisp, distortion-free audio at high decibel levels. Its full-range design ensures a broad frequency response, capturing detailed mid-range and high-frequency content required to cut through road noise and competition environments.

• Manufacturer Part Number: PRO-FR69NEO
• Size: 6x9 inches
• Power Handling: 250 Watts RMS
• Impedance: 4 Ohms
• Magnet Material: High-strength Neodymium
• Configuration: Full-Range Loudspeaker

The DS18 PRO-FR5NEO is a high-output 5.25-inch full-range loudspeaker engineered for professional audio applications where space and weight are critical factors. By utilizing a high-strength neodymium magnet, this speaker delivers intense magnetic flux in a compact footprint, providing superior sensitivity and vocal clarity compared to traditional ferrite drivers.

Built to handle 200 Watts RMS, the PRO-FR5NEO is designed for high-performance audio builds, including custom door panels, motorcycle fairings, and marine applications where maximum SPL is required. Its full-range design ensures a broad frequency response, making it a versatile component for complex sound stages.

• Manufacturer Part Number: PRO-FR5NEO
• Speaker Size: 5.25"
• Power Handling: 200 Watts RMS / 400 Watts MAX
• Nominal Impedance: 4-Ohm
• Motor Material: High-Flux Neodymium
• Type: Full Range Loudspeaker

The DS18 PRO-CF6.4NR is a high-performance 6.5-inch mid-bass loudspeaker engineered for installers and audiophiles who require extreme output and precision in a lightweight package. By utilizing a high-strength neodymium magnet motor, this driver provides superior flux density and efficiency compared to traditional ferrite models, making it ideal for high-end door builds and custom pods where space and weight are critical factors.

• Manufacturer Part Number: PRO-CF6.4NR
• Size: 6.5 inches
• Power Handling: 250 Watts RMS
• Nominal Impedance: 4 Ohm
• Magnet Material: Neodymium for maximum motor strength and reduced weight
• Design: Mid-bass loudspeaker optimized for clear, punchy frequency response
• Cone Material: Carbon fiber reinforced for high rigidity and minimal distortion at high volume

The DS18 ZXI8.4D is a high-performance 8-inch subwoofer engineered for car audio enthusiasts who demand deep, accurate bass in compact installations. As part of the ZXI series, this driver features a high-excursion design, allowing for maximum cone displacement and air movement to deliver low-frequency impact that rivals larger units.

Equipped with 4-ohm dual voice coils (DVC), the ZXI8.4D offers versatile wiring configurations for various amplifier setups. Its robust construction is designed to handle 600 Watts RMS, ensuring reliable performance during sustained high-output playback.

• Manufacturer Part Number: ZXI8.4D
• Size: 8 inches
• Power Handling: 600 Watts RMS / 1200 Watts Max
• Impedance: 4-Ohm Dual Voice Coil (DVC)
• High Excursion design for superior low-end response
• Built for high-performance audio systems

The DS18 ZXI12.4D is a premium 12-inch high excursion subwoofer engineered for audio enthusiasts who demand deep, impactful low-frequency reproduction. Part of the ZXI series, this driver is designed to handle significant power while maintaining the structural integrity necessary for extreme cone travel and air displacement.

Featuring a Dual Voice Coil (DVC) configuration, the ZXI12.4D offers critical wiring flexibility, allowing you to optimize your amplifier's power output at different impedance loads. With a conservative rating of 1000 Watts RMS, this subwoofer provides the sustained performance required for high-output daily setups and competitive builds alike.

• Manufacturer Part Number: ZXI12.4D
• Subwoofer Diameter: 12 inches
• Power Handling: 1000 Watts RMS
• Nominal Impedance: 4-Ohm Dual Voice Coil (DVC)
• Configuration: High Excursion driver for increased air displacement
• Built for high-performance car audio systems and custom enclosures

The DS18 ZXI12.2D is a 12-inch high-excursion subwoofer engineered for serious low-frequency reinforcement and high-power handling. Part of the ZXI series, this driver is designed to move significant air, delivering the deep, impactful bass required for high-performance car audio systems. The dual voice coil (DVC) configuration provides essential wiring flexibility, allowing you to optimize your amplifier's power output at the appropriate impedance.

• Manufacturer Part Number: ZXI12.2D
• Size: 12 inches
• Power Handling: 1000 Watts RMS
• Impedance: Dual 2-Ohm
• Configuration: Dual Voice Coil (DVC)
• Design: High Excursion for increased linear travel and deeper bass response

The DS18 ZXI10.4D is a 10-inch high excursion subwoofer engineered to anchor your vehicle's audio system with deep, powerful low-end response. Designed for high-output applications, this driver handles a continuous 800 Watts RMS, ensuring stable performance during demanding playback sessions. The high excursion design allows for greater linear travel, moving more air to produce the resonant bass notes typically expected from larger drivers.

Equipped with a 4-ohm dual voice coil (DVC) configuration, the ZXI10.4D offers versatile wiring options, allowing you to optimize your amplifier's power output. Whether installed in a sealed or ported enclosure, this ZXI series subwoofer provides the durability and precision required for custom car audio builds.

• Manufacturer Part Number: ZXI10.4D
• Subwoofer Diameter: 10 inches
• Power Handling: 800 Watts RMS
• Nominal Impedance: 4-Ohm Dual Voice Coil (DVC)
• Series: ZXI High Excursion

The DS18 ZXI10.2D is a high-performance 10-inch subwoofer designed for audiophiles seeking significant low-end impact and high linear displacement. Part of the ZXI series, this high-excursion driver is built to handle 800W RMS of continuous power, providing deep, accurate bass reproduction in a variety of enclosure types. The dual 2-ohm voice coil (DVC) configuration offers essential wiring flexibility to optimize your amplifier's output.

• Model: ZXI10.2D
• Driver Diameter: 10 inches
• Power Handling: 800 Watts RMS / 1600 Watts Max
• Impedance: Dual 2-Ohm Voice Coils
• Design: High Excursion for maximum air movement
• Terminals: High-quality secure connectors

Enhance your vehicle's soundstage with the DS18 ZXI-T1 1.7-inch Neodymium Dome Tweeter. This compact high-frequency driver is engineered to deliver crisp, detailed highs by utilizing a powerful neodymium magnet and a 1-inch PEI (Polyetherimide) voice coil. The PEI diaphragm provides excellent thermal stability and clarity, making it an ideal choice for listeners looking to upgrade from factory tweeters to a more defined audio experience.

• Manufacturer Part Number: ZXI-T1
• Size: 1.7 inches
• Power Handling: 50 Watts RMS
• Nominal Impedance: 4 Ohm
• Magnet Material: Neodymium
• Voice Coil Diameter: 1 inch
• Voice Coil Material: PEI

The DS18 ZXI-694 6x9-inch 2-way coaxial speakers are designed for enthusiasts seeking high-fidelity sound and reliable performance in a standard oval-mount format. These speakers deliver a consistent 120W RMS power handling at a 4-ohm impedance, providing a substantial upgrade in volume and clarity over factory-installed paper cone speakers.

Built with a focus on material science, the ZXI-694 features a lightweight Kevlar cone. Kevlar offers an exceptional strength-to-weight ratio, allowing the speaker to remain rigid under high excursion to minimize distortion while reacting quickly to rapid transients in your music. The integrated 2-way coaxial design ensures a seamless transition between mid-bass and high frequencies for a well-rounded soundstage.

• Manufacturer Part Number: ZXI-694
• Speaker Size: 6x9 inches
• Type: 2-Way Coaxial
• RMS Power Handling: 120 Watts
• Nominal Impedance: 4 Ohms
• Cone Material: Kevlar

The DS18 ZXI-654 6.5-inch 2-way coaxial speaker is engineered for audiophiles seeking a balance of durability and high-fidelity sound reproduction. As part of the ZXI series, this speaker features a lightweight yet rigid Kevlar cone that delivers precise midrange response while resisting the environmental stress of high-volume automotive use.

Designed to fit standard 6.5-inch mounting locations, the ZXI-654 provides a clear path for upgrading factory audio systems. The integrated 2-way design ensures a seamless transition between low-mid frequencies and crisp high-frequency output, handling a continuous 80 Watts RMS for reliable performance under load.

• Manufacturer Part Number: ZXI-654
• Speaker Size: 6.5 inches
• Type: 2-Way Coaxial
• Power Handling: 80 Watts RMS
• Impedance: 4-Ohm
• Cone Material: High-strength Kevlar

Upgrade your vehicle's soundstage with the DS18 ZXI-62C 6.5-inch 2-way component speaker system. Designed for high-fidelity reproduction, this set utilizes Kevlar cones to provide an exceptional strength-to-weight ratio, ensuring fast transients and minimal distortion under heavy excursion. By separating the woofer and tweeter, this component system allows for more precise mounting to improve imaging and soundstage height compared to standard coaxial designs.

Built to withstand the rigors of high-output use, the ZXI-62C features a robust 80W RMS power rating at a standard 4-ohm impedance, making it a versatile choice for integration with aftermarket amplifiers. The included crossovers ensure frequencies are correctly divided between the 6.5-inch mid-bass driver and the high-frequency tweeter for a seamless acoustic transition.

• Manufacturer Part Number: ZXI-62C
• Speaker Diameter: 6.5 inches
• Design: 2-Way Component System
• Power Handling: 80 Watts RMS
• Impedance: 4 Ohms
• Cone Material: Kevlar

Upgrade your vehicle's audio performance with the DS18 ZXI-574 5x7-inch 2-way coaxial speakers. These units are designed for enthusiasts seeking a balance of power and precision, featuring high-strength Kevlar cones that maintain structural integrity during high-excursion playback. The 2-way design ensures a full range of sound, delivering crisp highs and punchy mids to replace or upgrade factory paper-cone speakers.

• Part Number: ZXI-574
• Speaker Size: 5x7"
• Configuration: 2-Way Coaxial
• Power Handling: 70 Watts RMS
• Impedance: 4-Ohm
• Cone Material: Kevlar
• High-quality audio reproduction for standard 5x7" mounting locations

Upgrade your vehicle's soundstage with the DS18 ZXI-5254, a high-fidelity 5.25-inch 2-way coaxial speaker engineered for superior clarity and durability. As part of the ZXI series, these speakers feature lightweight, high-strength Kevlar cones that provide excellent transient response and minimal distortion even under high-excursion demands.

The integrated tweeter configuration delivers a balanced full-range frequency response, making these speakers an ideal replacement for underperforming factory units in standard 5.25-inch mounting locations. With 60W RMS power handling and a 4-ohm impedance, they integrate seamlessly with most aftermarket head units and multi-channel amplifiers.

• Manufacturer Part Number: ZXI-5254
• Speaker Type: 2-Way Coaxial
• Diameter: 5.25" (133mm)
• Power Rating: 60 Watts RMS / 180 Watts Max
• Impedance: 4 Ohms
• Cone Material: Kevlar
• Voice Coil: High-temperature KSV

The DS18 ZXI-44 is a high-performance 4-inch 2-way coaxial speaker engineered for automotive enthusiasts who demand clarity and durability. As part of the premium ZXI series, this speaker features a signature Kevlar cone, providing a high strength-to-weight ratio for precise mid-bass response and long-term resilience against environmental wear.

Designed to fit standard 4-inch mounting locations, the ZXI-44 offers an efficient upgrade for factory sound systems. The 2-way design integrates a dedicated tweeter to deliver a full frequency range from a single mounting point, handling 50 Watts RMS with 4-ohm impedance for compatibility with a wide range of aftermarket head units and amplifiers.

• Manufacturer Part Number: ZXI-44
• Size: 4 inches
• Type: 2-Way Coaxial
• Power Handling: 50 Watts RMS
• Impedance: 4 Ohms
• Cone Material: High-strength Kevlar

Upgrade your vehicle's mid-range and high-frequency response with the DS18 ZXI-3542. These 3.5-inch 2-way coaxial speakers are engineered for high-fidelity audio in compact mounting locations, such as dashboard or pillar factory speaker positions. The inclusion of Kevlar cones provides a lightweight, exceptionally rigid surface that maintains structural integrity under high excursion, resulting in clearer sound with minimal distortion.

As part of the ZXI series, these speakers are designed to balance power handling with precision. The 2-way design incorporates a dedicated tweeter to manage the high-end spectrum, ensuring a full-range sound stage from a small footprint. With a 40W RMS rating and 4-ohm impedance, they serve as a significant upgrade over factory paper-cone drivers when paired with an aftermarket head unit or a small amplifier.

• Manufacturer Part Number: ZXI-3542
• Speaker Size: 3.5" (89mm)
• Power Handling: 40 Watts RMS / 120 Watts Max
• Impedance: 4 Ohms
• Cone Material: Kevlar
• Speaker Type: 2-Way Coaxial

The DS18 ZXI-354 is a high-performance 3.5-inch full-range speaker engineered for enthusiasts seeking exceptional audio clarity in a compact form factor. As part of the ZXI series, this speaker utilizes a high-strength Kevlar cone to provide the necessary rigidity for precise frequency response and minimal distortion, even at high volume levels.

Designed to fit many factory dashboard and pillar locations, this 4-ohm driver serves as a significant upgrade over standard OE speakers. Its 1-way full-range configuration ensures a cohesive soundstage, delivering crisp highs and balanced mid-tones across the audible spectrum. The ZXI-354 is built to handle the rigors of automotive environments while maintaining the fidelity required for high-end audio systems.

• Speaker Size: 3.5 inches
• Power Handling: 40 Watts RMS / 80 Watts Max
• Impedance: 4-Ohm
• Cone Material: Kevlar
• Configuration: 1-Way Full Range
• Manufacturer Part Number: ZXI-354

The DS18 ZR8.4D is a high-performance 8-inch subwoofer from the ZR series, engineered to deliver substantial low-frequency impact in compact enclosures. Designed for enthusiasts seeking precise bass and high power handling in a smaller footprint, this driver manages a continuous 450 Watts RMS. The dual voice coil (DVC) configuration provides versatile wiring options, allowing you to optimize your amplifier's output at various impedance loads.

• Manufacturer Part Number: ZR8.4D
• Series: ZR Series
• Size: 8 inches
• Power Handling: 450 Watts RMS
• Impedance: Dual 4-Ohm Voice Coils
• Application: Car audio low-frequency reinforcement

The DS18 ZR6.4D is a high-performance 6.5-inch subwoofer designed for audiophiles requiring deep, resonant bass in compact spaces. As part of the ZR series, this driver is engineered to handle 300 Watts RMS, providing consistent low-frequency reinforcement for custom audio installations where mounting depth and enclosure volume are limited.

Equipped with Dual Voice Coils (DVC) at 4 ohms each, the ZR6.4D offers versatile wiring configurations to optimize amplifier load. Its robust construction and precision-engineered motor assembly ensure high-excursion capability and efficient heat dissipation during extended high-volume play.

• Model: ZR6.4D
• Driver Diameter: 6.5 inches
• Power Handling: 300 Watts RMS
• Nominal Impedance: Dual 4-Ohm
• Series: ZR Subwoofer