Fits select 2002-2011 Honda CR-V and Element. This EBC Brakes S2 series brake kit (S2KF1772) is engineered for spirited street driving, providing up to a 20% improvement in stopping power over original equipment components. By combining high-efficiency pads with precision-engineered sport rotors, this kit delivers consistent braking performance for fast compacts and daily-driven SUVs alike.

The kit features EBC pads with a patented Brake-in surface coating, which conditions the rotor surface and accelerates the bed-in process for immediate performance. These are paired with fine-slotted G3000 sport rotors. Each rotor is fully balanced and run-out tested to ensure smooth, vibration-free operation, while the Geomet thermic coating provides long-lasting resistance against rust and corrosion.

• High-efficiency brake pads with EBC Brake-in coating for faster bedding
• Fine-slotted G3000 sport rotors designed for heat dissipation and gas venting
• Geomet anti-rust thermic coating for superior corrosion resistance
• Fully balanced and run-out tested to eliminate pedal pulsation and vibration
• Up to 20% improvement in braking efficiency over stock setups
• Manufacturer Part Number: S2KF1772

Fits select 2021-2026 BMW M2, M3, and M4 models (Base, Competition, CS, and CSL).

The EBC Brakes S26 Stage 26 kit is an engineered brake upgrade designed for high-performance street driving and occasional track use. This kit centers on the high-friction Yellowstuff pad compound, which provides a significantly higher bite and better thermal management than standard OE pads. Designed as a direct bolt-on replacement for factory hardware, the S26 kit ensures consistent stopping power under the increased heat loads experienced during spirited driving on the street or technical track sessions.

• Includes EBC Yellowstuff high-friction brake pads
• Matched performance rotors for optimal pad bedding and wear
• Designed for spirited street, European sport, and track-capable applications
• Direct fit replacement for original equipment components
• Manufacturer Part Number: S26KR1009

Fits select 2021-2026 BMW M2, M3, and M4 models.

The EBC S29 Rear Brake Pad and Rotor Kit is engineered for high-temperature racing environments where consistent friction and thermal stability are critical. This kit pairs EBC RP-1 race pads with SG2F two-piece floating rotors, providing a significant performance upgrade for track-focused G80, G82, and G87 chassis vehicles. The RP-1 compound delivers true race performance with excellent modulation, while the floating rotor design allows for thermal expansion to maintain a flat braking surface under extreme heat.

• RP-1 race pads utilize stainless steel back plates to minimize heat transfer to the rear calipers.
• SG2F 2-piece floating rotors reduce unsprung weight and resist warping during heavy track use.
• Fully vented and slotted rotors ensure effective outgassing and cooling.
• Designed to integrate seamlessly with the factory OE rear calipers.

• Manufacturer Part Number: S29KR1008
• Position: Rear
• Rotor Diameter: 370mm
• Rotor Thickness: 24mm
• Rotor Construction: 2-Piece Floating, Vented
• Bolt Pattern: 5-Lug (5 Bolt Holes)
• Pad Compound: RP-1 Race
• FMSI Pad Number: D1469

Fits select 2015-2023 Dodge Challenger and Charger models, including SRT Hellcat, Scat Pack, R/T, and SXT.

The EBC Racing S27 front brake kit is a high-performance braking solution engineered for high-powered vehicles driven aggressively on the street or used for frequent track days. This kit combines EBC’s Bluestuff track-focused pads with SG2F fully-floating two-piece rotors to provide the ultimate thermal management and stopping power.

• SG2F Floating Rotors: Constructed with G3500 high-carbon alloy outer friction rings and patented stainless steel SD-Drive bobbins to allow for independent expansion, preventing rotor warping under extreme heat.
• Bluestuff Pads: An R90-approved, road-legal compound that emphasizes on-track performance with high cold friction and superior fade resistance compared to Yellowstuff.
• Thermal Efficiency: Features 48 curved internal vanes specifically handed for each side of the vehicle to maximize airflow and heat dissipation.
• Unsprung Mass Reduction: The two-piece design often reduces rotational weight compared to one-piece OEM rotors, improving overall driving dynamics and suspension response.
• Serviceable Components: Designed for longevity, the aluminum center hubs can be retained while only the outer friction rings are replaced when worn, reducing long-term operating costs.
• Silent Operation: Each bobbin location includes an anti-rattle clip to ensure the floating hardware remains quiet during daily street use.
• Kit Components: Includes EBC Bluestuff pads and SG2F two-piece floating rotors (S27 Kit).

Fits select 2018-2022 Ford F-150 and Expedition, Toyota Camry and Corolla, Kia Optima, Lincoln Navigator, and Volkswagen Passat.

The EBC Brakes S2 kit is a performance-matched upgrade designed to replace factory components with high-efficiency pads and precision-engineered rotors. This kit provides an estimated 20% improvement in braking power over standard OEM configurations, making it an ideal choice for spirited daily driving and heavy-duty applications alike.

The included G3000 iron sport rotors feature a fine-slotted design that helps expel heat, gases, and debris to maintain a clean pad contact surface. Every rotor is fully balanced and run-out tested for smooth, vibration-free operation. To ensure long-lasting durability and a clean appearance, the rotors are finished with a Geomet thermic anti-rust coating that protects against corrosion. The performance pads are treated with a patented Brake-in coating to accelerate the bedding process and ensure immediate stopping power.

• Includes high-efficiency EBC pads with patented Brake-in coating for faster bed-in
• G3000 iron sport rotors with fine slots for improved cooling and debris removal
• Geomet thermic anti-rust coating provides superior corrosion resistance
• Fully balanced and run-out tested to ensure smooth, consistent braking
• Engineered for an approximate 20% increase in braking efficiency
• Manufacturer Part Number: S2KF1731

Fits 2021-2026 BMW M2, M3, and M4 models including Competition, xDrive, CS, and CSL editions.

The EBC S27 Bluestuff NDX kit is engineered for drivers who transition between aggressive street use and demanding track applications. At the heart of this kit is the Bluestuff NDX friction material, a high-friction sport and race compound that maintains performance and longevity under heavy thermal loads. Whether you are piloting a G80 M3 or a G82 M4, this matched rotor and pad set provides the consistent bite and fade resistance required for high-performance driving.

• High-friction Bluestuff NDX compound for aggressive street and circuit use
• Engineered for superior thermal stability and pad longevity
• Direct-fit replacement for factory braking components
• Optimized for G8x chassis BMW M-series vehicles
• Manufacturer Part Number: S27KF1034

Fits 2012-2019 BMW M5, M6, and M6 Gran Coupe.

EBC Brakes Bluestuff NDX is a high-friction sport and entry-level race compound designed for drivers who demand consistent stopping power across both spirited street driving and track environments. These pads bridge the gap between high-performance street pads and full-race materials, offering a high initial bite and a stable friction coefficient even under the significant thermal loads generated by heavy, high-horsepower vehicles like the BMW M-series.

Every Bluestuff pad is surface-scorched during manufacturing to accelerate the bed-in process, ensuring the pads reach their full performance potential quickly after installation. The NDX material is chemically bonded to the steel backing plate using a high-strength interlayer to prevent pad delamination under extreme heat.

• High-friction NDX compound provides excellent bite and thermal stability
• Surface-scorched finish significantly reduces bed-in time
• Deep V-grooves assist in venting heat and clearing brake dust and debris
• Specifically formulated for the weight and speed requirements of M-series chassis
• Compatible with factory calipers and rotors
• Manufacturer Part Number: S27KF1036

Fits 2021-2022 BMW M3 and M4 models (Base, Competition, and Competition xDrive).

Upgrade your BMW’s braking performance with the EBC Brakes S26 kit, combining high-friction Yellowstuff pads with SG2F vented rotors. This package is engineered for the high-performance demands of the G80 M3 and G82 M4, offering a significant improvement in stopping power and thermal management over factory components. Whether for spirited street driving or light track sessions, this kit provides the bite and fade resistance required for heavy M-series vehicles.

• Yellowstuff Brake Pads: A high-friction compound that delivers strong cold bite and maintains performance through high temperatures without the need for a warm-up.
• SG2F Vented Rotors: Precision-machined vented design maximizes heat dissipation to prevent brake fade and rotor warping during aggressive deceleration.
• Direct OE Replacement: Designed to bolt directly into the factory braking system for a straightforward installation.
• Complete Axle Set: Includes both rotors and a matching set of pads for consistent performance across the axle.
• MPN: S26K1011

Fits select 2021-2026 BMW M2, M3, and M4 (G80/G82/G87).

The EBC Brakes S29 kit is a comprehensive track-ready braking solution that replaces your factory components with race-proven hardware. This front and rear system combines RP-1 race pads with SG2F two-piece floating rotors to manage the extreme thermal loads generated during aggressive circuit driving. Designed to integrate seamlessly with your OE calipers, this kit provides a significant upgrade in heat dissipation and fade resistance without requiring a full big brake kit conversion.

• RP-1 Race Pads: Features stainless steel back plates to reduce heat transfer and deliver consistent friction levels at high race temperatures.
• SG2F Floating Rotors: High-performance 2-piece design allows for thermal expansion, reducing stress and preventing rotor warping.
• Front Rotor Specs: 380mm diameter, 36mm thickness, vented construction.
• Rear Rotor Specs: 370mm diameter, 24mm thickness, vented construction.
• Complete Hardware: Includes FMSI pad numbers D2478 (front) and D1469 (rear) with a 5/5 bolt pattern.
• Manufacturer Part Number: S29K1011

Fits 2021-2024 BMW M2, M3, and M4 models including Competition, CS, and CSL variants. This EBC Brakes S25 series kit provides a complete rotor and pad upgrade designed for high-performance street use.

EBC Redstuff ceramic brake pads are engineered specifically for high-horsepower prestige European cars like the G80 and G82 M-series. These pads address the common issue of heavy brake dust, reducing emissions by approximately 80% compared to original equipment pads while maintaining the high-temperature stability required for spirited driving. When paired with EBC's matching rotors, this kit ensures consistent friction levels and improved thermal management over stock components.

• Manufacturer Part Number: S25K1007
• Pad Compound: Redstuff Ceramic (Low Dust)
• Reduces brake dust by up to 80% compared to OEM pads
• Ideal for high-horsepower imports and prestige street vehicles
• Complete kit includes front and rear matched pads and rotors

Fits select 2021-2026 BMW M2, M3, and M4 models (Base, Competition, xDrive, CS, and CSL). This EBC S27 brake kit combines high-performance Bluestuff NDX pads with SG2F two-piece floating rotors to deliver professional-grade stopping power for both track use and aggressive street driving.

The Bluestuff NDX pad is a high-friction sport and race material engineered to maintain consistent pedal feel under high thermal loads while offering longevity during endurance applications. To complement the pads, the included SG2F rotors feature a two-piece floating design. This construction allows the outer ring to expand independently of the center hub during heavy braking, significantly reducing heat-related warping and stress cracking common in high-performance G8X chassis applications.

• Manufacturer Part Number: S27KR1010
• Pad Material: EBC Bluestuff NDX High-Friction Sport/Race Compound
• Rotor Type: SG2F 2-Piece Floating Slotted Rotors
• Caliper Compatibility: Designed to integrate directly with factory OE calipers
• Applications: Suitable for imports, sports cars, and muscle cars in track and performance street environments

Fits select 2012-2020 Audi S3, Volkswagen CC, GTI, and Passat.

The EBC Brakes S26 Kit combines Yellowstuff high-friction pads with SG2F performance rotors to deliver superior stopping power for spirited street driving and track-day applications. This kit replaces worn factory components with high-performance materials designed to manage heat and increase braking torque on European sport models.

Yellowstuff pads feature a high-friction coefficient that provides a strong initial bite and maintains performance under high temperatures. When paired with SG2F rotors, this system ensures consistent pedal feel and reduced brake fade, whether you are navigating a daily commute or pushing the limits on the track. The kit is specifically engineered to handle the demands of fast imports and performance-tuned Volkswagen and Audi platforms.

• Manufacturer Part Number: S26KF1016
• Includes EBC Yellowstuff high-friction brake pads
• Includes a pair of SG2F performance rotors
• Track-capable formulation with excellent cold bite for street use
• Ideal for spirited driving, light track duty, and heavy braking scenarios
• Direct-fit replacement for factory brake systems

Fits 2018-2021 Dodge Durango SRT Hellcat and Jeep Grand Cherokee Trackhawk.

This high-performance front brake kit combines EBC Brakes Yellowstuff pads with 2-piece floating rotors to provide the stopping power required for heavy, high-horsepower SUVs. The Yellowstuff pads feature a high friction coefficient that remains stable under high temperatures, making them suitable for spirited street driving, track use, and heavy-duty applications like towing or off-road excursions.

The included 2-piece floating rotors are engineered to handle extreme thermal expansion. By separating the outer friction ring from the aluminum center bell, these rotors reduce unsprung weight and prevent the warping often seen in single-piece rotors during aggressive use. This combination ensures consistent pedal feel and improved heat dissipation for the SRT Hellcat and Trackhawk platforms.

• Manufacturer Part Number: S26KF1037
• Position: Front Axle
• Pad Compound: EBC Yellowstuff High Friction
• Rotor Design: 2-Piece Floating
• Compatibility: 2021 Dodge Durango SRT Hellcat; 2018-2021 Jeep Grand Cherokee Trackhawk

Fits select 2021-2026 BMW M2, M3, and M4 models (including Base, Competition, CS, and CSL variants). This EBC Brakes S26 Series kit provides a comprehensive brake system upgrade, pairing high-friction Yellowstuff pads with performance rotors to manage the thermal demands of spirited street driving and track sessions.

The included Yellowstuff compound is engineered for a high friction coefficient, delivering improved initial bite and fade resistance compared to factory components. This kit is specifically designed for high-performance European sport applications where consistent stopping power is required under repeated heavy braking cycles.

• High-friction Yellowstuff pads for increased stopping power and thermal stability
• Performance-matched rotors designed for efficient heat dissipation
• Direct-fit replacement for factory braking components
• Suitable for spirited street use and track-day capability
• Complete front and rear axle kit (check application for specific kit coverage)
• Manufacturer Part Number: S26KF1036

Fits 2021-2026 BMW M2, M3, and M4 models (S58 engine).

The EBC S27 kit is engineered for drivers who demand consistent braking performance across both aggressive street use and track applications. This kit combines Bluestuff NDX high-friction pads with SG2F 2-piece floating rotors to provide superior thermal management and stopping power. The Bluestuff NDX material offers a high friction coefficient and excellent longevity under high-temperature conditions, making it a versatile choice for sports and import tuning.

The included SG2F rotors feature a 2-piece floating design that allows the outer ring to expand independently of the hub. This construction significantly reduces heat-related distortion and brake fade while maintaining compatibility with the factory OE calipers.

• Complete front brake upgrade kit (MPN: S27K1011)
• Bluestuff NDX high-friction pads for street and track
• SG2F 2-piece floating rotors for maximum heat dissipation
• Maintains compatibility with original equipment calipers
• High-temperature resistant materials for fade-free performance

Fits 2021-2022 BMW M3 and M4 (G80/G82) including Base, Competition, and xDrive models.

The EBC Racing S25KR1006 Rear Brake Kit provides a significant upgrade over factory components, combining specialized friction material with advanced rotor metallurgy. This kit features EBC Redstuff ceramic pads, engineered to reduce brake dust by approximately 80% compared to OEM pads while maintaining high-friction performance for heavy, high-horsepower European prestige cars. These pads are paired with SG Series 2-piece floating rotors, which utilize aluminum bells to reduce unsprung weight and allow for independent thermal expansion, minimizing the risk of rotor warping during spirited driving.

• Redstuff Ceramic Pads: Low-dust compound designed for fast street use and high-performance braking.
• SG Series 2-Piece Rotors: Fully floating design with aluminum hats for improved heat dissipation and reduced weight.
• Direct OE Replacement: Engineered to bolt directly to the factory rear calipers on G80 and G82 chassis.
• Manufacturer Part Number: S25KR1006

Fits select 2015-2026 Audi A3, A3 Quattro, Lincoln Corsair, and Volkswagen Golf, GTI, and Taos.

The EBC Brakes S20 kit provides a comprehensive brake overhaul for both front and rear axles. This kit pairs EBC Ultimax brake pads with premium G3000-style rotors, offering a direct replacement for factory components without the need for modifications. Designed as a high-efficiency solution for daily drivers, these pads utilize aramid fiber construction and come fully shimmed and chamfered to minimize noise and vibration during engagement.

Each rotor is precision-balanced and runout tested to ensure smooth performance and prevent pedal pulsation. The Geomet anti-rust coating protects the rotor surfaces from corrosion, maintaining a clean appearance behind your wheels. To simplify the installation process, the pads feature the patented EBC Brake-in coating, which accelerates the initial bedding process for immediate stopping power after installation.

• Complete Kit: Includes pads and rotors for both front and rear axles plus caliper lubricant.
• Ultimax Brake Pads: Aramid fiber compound with a high-friction surface for consistent braking.
• Anti-Corrosion Rotors: G3000 cast iron construction with Geomet surface coating to resist rust.
• Direct Fit: Replaces OEM setup using factory mounting points; no modifications required.
• Manufacturer Part Number: S20K2500
• Warranty: 10,000-mile no-hassle manufacturer warranty.

Fits select 2015-2023 Volkswagen Arteon, Golf R, GTI, Tiguan, and Tiguan Limited.

Restore and upgrade your vehicle's stopping power with the EBC S20 Series Brake Pad and Rotor Kit. This comprehensive kit is designed as a direct-fit replacement for factory braking components, addressing common issues like brake fade, rotor vibration, and diminished friction. Engineered for drivers who demand consistent pedal feel and reliable thermal management, the S20 kit combines precision-machined rotors with high-friction EBC pads to ensure balanced performance across a wide operating temperature range.

• Complete matched set of pads and rotors for simplified installation
• Precision-machined rotors help eliminate pedal pulsation and uneven wear
• Engineered to meet or exceed OE specifications for fitment and durability
• Direct bolt-on replacement for factory hardware
• Manufacturer Part Number: S20K2485

Fits select 2008-2013 Subaru Impreza and Outback models including WRX and STI variants.

The EBC Brakes S20 Kit (S20K1935) is a complete brake service solution designed for daily drivers. By replacing both front and rear pads and rotors at once, you ensure balanced braking performance and restore the original stopping power of your Subaru. This kit uses Ultimax pads paired with G3000-spec rotors to provide a quiet, high-efficiency alternative to stock components without requiring any modifications to the factory braking system.

• Ultimax Brake Pads: Formulated with Aramid fiber and fully shimmed and chamfered for low-noise operation. Features a patented Brake-In coating to accelerate the bedding process immediately after installation.
• Premium G3000 Rotors: Precision-cast OEM-style rotors made from high-quality gray iron. Every rotor is balanced and runout tested to eliminate pedal pulsation and ensure smooth operation.
• Geomet Coating: Rotors are treated with an anti-rust surface coating to maintain appearance and prevent corrosion on the hub and cooling vanes.
• Complete Set: Includes all necessary pads and rotors for both the front and rear axles, along with caliper lubricant for a professional installation.

• Manufacturer Part Number: S20K1935
• Pad Material: Aramid Fiber
• Rotor Material: G3000 Gray Iron
• Finish: Geomet Anti-Rust Coating
• Fitment Type: Direct Replacement
• Warranty: 10,000 Mile No-Hassle Warranty

Fits select 2008-2022 Audi R8 and Lamborghini Gallardo models (including GT, Performance, Plus, Spyder, and LP-series variants).

The EBC Brakes Stage 25 kit is a premium rear braking solution engineered specifically for high-horsepower European prestige and performance vehicles. This kit combines EBC Redstuff ceramic pads with high-performance 2-piece racing rotors to deliver superior thermal management and a significant reduction in brake dust. It is the ideal choice for spirited street driving where maintaining wheel cleanliness and consistent stopping power is a priority.

• Low-Dust Braking: EBC Redstuff ceramic pads are formulated to reduce emitted dust by approximately 80% compared to original equipment pads.
• Advanced 2-Piece Rotors: The racing-spec 2-piece rotor design allows for better heat dissipation and reduced unsprung weight compared to traditional one-piece iron rotors.
• High-HP Capability: Optimized for the thermal demands of mid-engine supercars and heavy-braking scenarios.
• Direct Fitment: Designed to replace factory rear components without modification.
• Manufacturer Part Number: S25KR1002

Each Stage 25 kit includes a complete set of rear Redstuff ceramic brake pads and a pair of 2-piece racing rotors, providing a comprehensive axle upgrade for your vehicle.

Fits select 2015-2022 Dodge Challenger and Charger models, including SXT, R/T, Scat Pack, and SRT Hellcat trims.

The EBC Racing S26 brake kit is engineered for drivers who demand consistent, high-friction stopping power during spirited street driving or occasional track sessions. This performance upgrade replaces standard components with EBC Yellowstuff pads and 2-piece SG series floating rotors. The Yellowstuff pad compound offers a high friction coefficient and is specifically designed to maintain bite under the thermal loads of heavy vehicles and performance imports.

By utilizing a 2-piece floating rotor design, this kit allows for independent thermal expansion of the rotor ring, significantly reducing the risk of warping and fade compared to standard one-piece cast rotors. These components are designed to integrate seamlessly with your factory OE calipers and mounting points.

• Yellowstuff high-friction pads provide superior bite for street, track, and towing/hauling
• Highest quality 2-piece SG series floating brake rotors for enhanced heat dissipation
• S26 kit configuration includes both Yellowstuff pads and SG2F rotors
• Direct-fit installation designed to integrate with original equipment calipers
• Manufacturer Part Number: S26KF1023

The EBC Brakes S26 kit is engineered for high-performance street and occasional track-day use, pairing the aggressive friction of Yellowstuff pads with the advanced thermal management of SG2F two-piece rotors. This combination effectively reduces brake fade and unsprung weight while ensuring consistent pedal feel under heavy thermal loading.

The included Yellowstuff pads are a high-friction compound that provides a strong initial bite from cold and maintains performance through repeated high-speed stops. For the rotors, the SG2F series utilizes a fully floating design; the high-carbon cast iron rings are mounted to lightweight aluminum hats using EBC’s patented SD-Drive hardware. This construction allows the friction surface to expand and contract independently of the hub, significantly reducing the risk of rotor warping and pedal pulsation during spirited driving.

• Includes high-friction Yellowstuff brake pads and a pair of SG2F two-piece rotors
• Fully floating rotor design prevents thermal warping and reduces unsprung weight
• High-carbon cast iron friction rings with lightweight aluminum hubs
• Ideal for fast street applications and track-day requirements
• Manufacturer Part Number: S26KF1031

Upgrade the stopping power of your 2017-2021 Honda Civic Type R with the EBC S20 Brake Pad and Rotor Kit. This performance-oriented kit replaces your worn factory components with a matched set of pads and rotors engineered to handle the thermal loads and friction requirements of spirited driving and track-day sessions.

The S20 kit (S20K2490) provides a direct-fit solution that bolts onto factory mounting points without modification. By pairing high-friction pads with precision-machined rotors, EBC ensures optimal pad-to-rotor contact and improved bite. The materials used are specifically selected to resist brake fade and maintain consistent pedal feel even under repeated heavy braking.

• Fits 2017-2021 Honda Civic Type R.
• Matched pad and rotor set for balanced braking performance across the axle.
• High-friction material compounds designed for improved stopping distances and thermal resistance.
• Engineered to resist warping and surface cracking under high-heat conditions.
• Maintains factory brake bias while providing a significant performance headroom over OE.
• Manufacturer Part Number: S20K2490

Fits select 2012-2015 Honda Civic and 2013-2015 Acura ILX models.

Renewing your braking system on both axles ensures balanced stopping power and restores factory-fresh pedal feel. The EBC Brakes S20 Ultimax Pad and Rotor Kit (MPN: S20K1740) provides a complete solution for daily drivers, featuring high-efficiency Ultimax pads and premium G3000-spec rotors for both the front and rear of your vehicle. Since the rear brakes can account for up to 40% of stopping effort, replacing both axles simultaneously is the most effective way to ensure uniform performance.

The included Ultimax pads are engineered with a high-friction aramid fiber compound, fully shimmed and chamfered to eliminate brake squeal. They feature EBC’s patented Brake-In surface coating, which facilitates rapid pad-to-rotor bedding immediately after installation. These are paired with precision-machined G3000 rotors that are runout tested and balanced to prevent pedal pulsation. Every rotor is finished with a Geomet anti-rust coating to protect against corrosion and maintain a clean appearance behind your wheels.

• Direct-fit replacement for factory braking components with no modifications required
• Includes Ultimax pads and G3000 rotors for both front and rear axles
• Aramid fiber pad construction for high-efficiency daily stopping
• Fully shimmed and chamfered pads with Brake-In coating for faster bedding
• Geomet anti-rust surface coating on balanced rotors
• Includes caliper lubricant for a professional installation
• 10,000-mile no-hassle manufacturer warranty
• Manufacturer Part Number: S20K1740

Fits select 2015-2022 Dodge Challenger and Charger models (V6-3.6L / V8-5.7L / V8-6.2L / V8-6.4L).

The EBC Racing S25KF1020 front brake kit provides a significant performance upgrade for modern Mopar muscle, balancing street-friendly manners with superior thermal capacity. Part of the P2DK series, this kit pairs EBC’s flagship Redstuff ceramic pads with their precision-engineered SG floating rotors to resolve common OEM braking limitations like excessive brake dust and heat-induced rotor warping.

• Redstuff Ceramic Pads: Formulated specifically for high-horsepower muscle cars and fast street use, these ceramic pads reduce brake dust by approximately 80% compared to factory equipment.
• SG Floating Rotors: The two-piece floating design allows the friction ring to expand independently from the hub, significantly reducing stress and the risk of warping under heavy braking cycles.
• Street Performance: Offers excellent cold bite and improved pedal feel without the noise and harshness of a dedicated track pad.
• Manufacturer Part Number: S25KF1020
• Contents: Includes one set of Redstuff pads and a pair of SG floating rotors for the front axle.

Fits 2021-2022 BMW M3 and M4 (Base, Competition, and Competition xDrive) equipped with standard iron brakes.

The EBC Racing S25KF1030 front brake kit is a high-performance braking solution designed for fast street use and spirited driving. This kit replaces factory components with EBC’s premium Signature Series (SG) rotors and Redstuff ceramic brake pads, specifically formulated for high-horsepower European vehicles.

• Redstuff Ceramic Pads: These pads provide a significant upgrade over stock by reducing emitted brake dust by approximately 80%. The ceramic compound is ideal for fast street applications, offering better bite and thermal stability without the heavy dusting of track pads.
• SG Series Rotors: Precision-machined to handle the high thermal loads of the G80 and G82 chassis, ensuring consistent performance and resistance to warping.
• Brake System Compatibility: This kit is intended for vehicles with standard iron brake systems; it is not compatible with models equipped with factory Carbon Ceramic Brakes (CCB).
• Manufacturer Part Number: S25KF1030

Fits 2005-2006 Honda CR-V (EX, LX, and SE models).

The EBC S20 Brake Pad and Rotor Kit provides a comprehensive solution for renewing your vehicle's braking performance on both the front and rear axles. This kit is designed for the daily driver, pairing EBC Ultimax brake pads with premium G3000 OEM-style rotors to restore original stopping power and pedal feel without the need for modifications.

The included Ultimax pads are engineered with Aramid fiber for high-efficiency friction and are fully shimmed, chamfered, and slotted to minimize noise and vibration. They feature the patented EBC Brake-in red surface coating, which helps condition the rotor surface and accelerates pad bedding immediately after installation. The rotors are precision-cast from G3000 gray iron, fully balanced, and runout tested to ensure smooth, judder-free operation. To prevent corrosion and maintain a clean appearance, each rotor is finished with a Geomet anti-rust surface coating.

• Complete front and rear axle kit including pads, rotors, and caliper lube
• Ultimax pads feature Aramid fiber construction and noise-reducing shims
• Premium G3000 iron rotors with Geomet anti-rust coating
• Brake-in surface coating for faster pad-to-rotor seating
• Direct-fit OEM replacement requires no modifications to factory setup
• Manufacturer Part Number: S20K1739
• 10,000-mile no-hassle manufacturer warranty

Fits select 2011-2022 Scion FR-S and Subaru BRZ, Impreza, and WRX/STI.

The EBC Brakes S20 Brake Pad and Rotor Kit (S20K1262) provides a comprehensive braking overhaul for both the front and rear axles. This daily-driver-focused kit combines high-efficiency EBC Ultimax pads with premium G3000-series rotors to restore original stopping power and improve thermal management compared to aged stock components. Replacing both axles simultaneously ensures balanced braking distribution, especially as rear brakes contribute up to 40% of a vehicle's stopping force.

Ultimax pads are engineered with high-friction Aramid fibers and feature a fully shimmed and chamfered design to eliminate noise and vibration. Every pad is finished with EBC's patented Brake-in coating, which accelerates the initial bedding process for immediate performance after installation. The included G3000 OEM-style rotors are precision-balanced and runout tested to ensure smooth operation. A Geomet anti-rust coating protects non-contact surfaces from corrosion, maintaining a clean appearance behind the wheels.

• Complete kit for front and rear axles (Part Number: S20K1262)
• Ultimax Aramid fiber pads for high-efficiency daily braking
• G3000-spec cast iron rotors with Geomet anti-corrosion finish
• Direct-fit replacement; no modifications required to factory calipers or brackets
• Patented Brake-in red coating for faster pad-to-rotor seating
• Includes caliper lubricant for a complete installation
• 10,000-mile no-hassle manufacturer warranty

Fits select 2015-2023 Subaru Ascent, Crosstrek, Forester, Legacy, Outback, and WRX.

The EBC Brakes S1 Kit is a premium rear axle brake service solution that combines Ultimax 2 pads with RK series rotors. This kit is engineered to restore or exceed the braking performance of your Subaru's factory components. The Ultimax 2 brake pads utilize a high-friction, non-metallic compound designed for daily driving, providing a quiet, low-dust experience while remaining gentle on the rotors. Paired with the RK series rotors, which are precision-cast and machined to match OE specifications, this kit ensures a smooth, vibration-free pedal feel and reliable stopping power in all weather conditions.

• Complete rear axle kit including pads and rotors
• Ultimax 2 premium brake pads (UD1808) for quiet daily operation
• RK series rotors (RK7710) machined to exact OE tolerances
• Direct-fit replacement for factory brake systems
• Designed for consistent friction and low rotor wear
• Manufacturer Part Number: S1KR1821

Fits 2022-2026 Volkswagen GTI (40th Anniversary Edition, Autobahn, S, SE).

The EBC Brakes S20 Ultimax Pad and Rotor Kit provides a comprehensive, factory-replacement solution for both the front and rear axles of your vehicle. Replacing all four corners simultaneously ensures balanced braking pressure and eliminates the performance discrepancy often found when mixing old and new components. This kit is specifically engineered for daily drivers seeking reliable stopping power and quiet operation with a direct-fit design that requires no modifications to the stock setup.

The included Ultimax brake pads are manufactured from a high-friction Aramid fiber compound. These pads feature a fully shimmed, chamfered, and slotted construction to minimize noise and vibration. Each pad is finished with EBC’s patented Brake-in™ coating, which accelerates the bedding-in process for immediate performance after installation. To complement the pads, the kit includes premium G3000-spec cast iron rotors. These rotors are precision-balanced and runout tested to ensure smooth, vibration-free operation. A silver Geomet anti-rust coating is applied to all non-contact surfaces to prevent corrosion and maintain a clean appearance behind your wheels.

• Complete front and rear axle kit (MPN: S20K2353)
• Ultimax Aramid fiber pads for low-noise daily driving
• Premium G3000-spec OEM-style cast iron rotors
• Geomet anti-rust protective coating on all rotor surfaces
• Patented Brake-in™ coating for faster pad-to-rotor bedding
• Fully balanced and runout tested for smooth braking
• Direct fit, OEM-style replacement with no modifications required
• Includes caliper lubricant