Fits 1991-2002 Saturn S-Series (SC, SC1, SC2, SL, SL1, SL2, SW1, and SW2).

Replace soft, worn-out rubber components with Energy Suspension Hyper-Flex polyurethane front sway bar bushings to restore handling and improve lateral stability. These 28.5mm bushings are designed to reduce deflection and allow your Saturn's sway bar system to operate with maximum efficiency, providing a feel similar to installing a larger performance sway bar without the added weight or cost.

Unlike original equipment rubber that degrades over time due to road salt, oil, and ozone exposure, the Hyper-Flex polyurethane construction is engineered for long-term durability and consistent performance under load. This kit (MPN 18.5101G) is a direct-fit solution for the 28.5mm front sway bar found on select S-Series chassis.

• Improves steering response and cornering flatter by reducing sway bar mount play
• Hyper-Flex polyurethane formulation resists automotive fluids and environmental degradation
• Black finish for a subtle, professional appearance
• Replaces standard 28.5mm OE front sway bar bushings

Fits 2006-2011 Honda Civic models, including DX, EX, EX-L, GX, Hybrid, LX, LX-S, MUGEN Si, and Si.

Upgrade your suspension response and control with the Energy Suspension Hyper-Flex rear upper shock bushing set. Factory rubber bushings are designed for comfort but are prone to excessive deflection and premature failure under load. These replacements provide the rigidity needed to maintain shock efficiency, ensuring your dampers work as intended during spirited driving or daily commuting.

Manufactured from Energy Suspension's proprietary Hyper-Flex polyurethane, these bushings offer superior durability over OEM rubber. They are engineered to resist degradation from road salt, oils, and other undercar contaminants that typically cause factory components to rot and crack. This set is a direct replacement for worn factory hardware, providing a long-lasting solution for both street and competition use.

• Replaces soft, worn-out factory rubber bushings
• Manufactured from high-grade Hyper-Flex performance polyurethane
• Increases shock absorber efficiency and suspension response
• Resistant to oils, grease, and environmental contaminants
• Manufacturer Part Number: 16.8112R
• Color: Red

Fits all 2006-2011 Honda Civic models, including DX, EX, EX-L, GX, LX, LX-S, Hybrid, and Si.

Restore suspension precision and improve damping efficiency with the Energy Suspension Hyper-Flex Rear Shock Upper Bushing Set. Factory rubber bushings are prone to drying, cracking, and excessive deflection, which compromises shock performance. These replacements are engineered from proprietary Hyper-Flex polyurethane to provide a more stable mounting point, ensuring your shocks react instantly to road inputs rather than being absorbed by soft rubber.

• Manufactured from high-durometer Hyper-Flex polyurethane for maximum durability
• Resistant to road salt, oil, and environmental contaminants that degrade OEM rubber
• Increases shock efficiency by reducing bushing-related play and deflection
• Direct fitment for factory rear shock upper mounting points
• Ideal for both street performance and competition use
• Kit includes a set of bushings for both rear shocks
• Manufacturer Part Number: 16.8112G

Fits 1999-2000 Honda Civic Si.

Upgrade your suspension response with the Energy Suspension Hyper-Flex Front Shock Bushing Set. These performance bushings replace soft factory rubber components that degrade over time, leading to sloppy handling and decreased damping efficiency. By utilizing a proprietary polyurethane formula, these bushings provide a firm, stable mounting point that allows your front shocks to operate with maximum precision and consistency.

Designed for both spirited street driving and competitive use, this set ensures instant suspension feedback and better control during high-load maneuvers. The black polyurethane construction is engineered to resist automotive fluids and road contaminants, offering significantly greater longevity than standard OE bushings.

• Precision engineered for a direct fit on factory front shocks
• Constructed from Energy Suspension’s durable Hyper-Flex polyurethane
• Improves steering response and shock absorber efficiency
• High resistance to oils, grease, and environmental degradation
• Manufacturer Part Number: 16.8111G

Fits select 1990-1998 Honda Accord, Odyssey, and Prelude models. This set replaces compliant or deteriorated factory rubber front shock bushings to restore suspension precision and improve overall handling response.

Constructed from Energy Suspension's proprietary Hyper-Flex polyurethane, these bushings are engineered to withstand the harsh conditions of the wheel well. Unlike OE rubber, which can rot, crack, and soften over time due to exposure to road salts, oils, and environmental factors, polyurethane maintains its durometer and structural integrity. This ensures that your shocks remain properly aligned and efficient, whether for daily driving, show use, or performance applications.

• Replaces soft or worn-out factory rubber front shock bushings
• Improves suspension response and shock efficiency
• Made from durable, chemical-resistant Hyper-Flex performance polyurethane
• Red finish for high visibility and a performance look
• Includes upper and lower bushings for the front shock position
• Manufacturer Part Number: 16.8106R

Fits 1990-1997 Honda Accord (DX, EX, LX, SE, Value Package) and 1995-1997 Honda Odyssey models. This front sway bar end link set is engineered to replace soft, original equipment rubber bushings that often perish under high-stress driving conditions or through age-related dry rot.

Energy Suspension's Hyper-Flex polyurethane formulation provides the necessary stiffness to maintain proper sway bar alignment and engagement, significantly reducing body roll and improving steering response. By eliminating the excessive deflection common in factory rubber, these end links help stabilize the vehicle during cornering and reduce wheel hop for more consistent traction. Constructed with heavy-duty metal hardware where applicable, these components are designed for long-term durability in both street and competition environments.

• Replaces compliant OE rubber with high-performance Hyper-Flex polyurethane
• Improves overall vehicle stability, handling, and cornering control
• Chemical and weather-resistant material outlasts standard rubber components
• Red finish for a custom performance look
• Includes heavy-duty metal hardware for increased strength
• Manufacturer Part Number: 16.8105R

Fits select 1988-2001 Acura Integra, Honda Civic, Honda CRX, and Honda Civic del Sol models including GS-R, Type R, and VTEC trims.

Energy Suspension Hyper-Flex polyurethane shock bushings are engineered to replace soft, prone-to-failure factory rubber components. Over time, OEM rubber bushings compress and rot, leading to sloppy suspension geometry, increased wheel hop, and diminished traction. These performance bushings restore instant response and control to your suspension system, providing a stable platform for both daily driving and competitive use.

Manufactured from Energy's proprietary Hyper-Flex polyurethane, these components offer superior longevity and efficiency compared to standard rubber. They maintain precise alignment during high-load cornering and hard acceleration, ensuring your shocks perform at their maximum efficiency. Where required, the kit includes heavy-duty metal components for increased strength and a secure fit to factory mounting points.

• Manufacturer Part Number: 16.8104R
• Material: Proprietary Hyper-Flex Polyurethane
• Reduces wheel hop and traction loss
• Increases overall vehicle stability and control
• Resistant to vehicle fluids and road grime
• Designed for durability and easy installation

Fits select 1990-2001 Acura Integra and 1988-1997 Honda Civic, CRX, and Civic del Sol models.

Improve your suspension’s responsiveness and efficiency with Energy Suspension Hyper-Flex shock bushings. Engineered to replace soft, prone-to-failure OEM rubber, these polyurethane bushings provide a stable and durable mounting point that allows your shocks to perform at their maximum potential. The firm construction of Hyper-Flex polyurethane reduces deflection, delivering instant control and better handling for street, show, or competition applications.

• Manufactured from Energy's proprietary Hyper-Flex performance polyurethane
• Provides instant suspension response and improved driver feedback
• Highly resistant to road salt, oils, and automotive fluids that degrade rubber
• Durable enough for the rigors of competitive racing and daily driving
• Includes high-performance bushings for shock mounting points
• Manufacturer Part Number: 16.8102R

Fits select 1988-2001 Acura Integra, Honda Civic, CRX, and Civic del Sol models (including VTEC). Replace soft, worn-out OEM rubber shock bushings with Energy Suspension Hyper-Flex polyurethane to restore suspension response and maximize shock efficiency. Unlike factory rubber that degrades and distorts over time, these polyurethane bushings maintain their shape under load, providing immediate damping feedback and consistent alignment control.

• Material: Proprietary Hyper-Flex Polyurethane
• Direct replacement for factory rubber shock eyelet bushings
• Resistant to oil, grease, road salt, and ozone degradation
• Maintains suspension geometry during competition or spirited driving
• Manufacturer Part Number: 16.8102G

Fits 1990-1993 Acura Integra GS, GS-R, LS, and RS models.

The Energy Suspension 16.7107R Rear Trailing Arm Bushing Set is re-engineered to provide significantly better control over rear suspension geometry. These bushings are designed to maintain proper rear toe and caster settings during high-performance driving, where factory rubber components often deflect. This added stability is especially critical for vehicles running larger-than-stock wheels and tires.

• Maintains alignment accuracy under high load conditions
• Reduces rear toe and caster deflection for more predictable handling
• Ideal for performance-oriented Integra builds and vehicles with upsized wheels
• Color: Red
• Manufacturer Part Number: 16.7107R

Note: Installation requires the reuse of all existing factory metal parts; this set includes the polyurethane components only.

Fits 1990-1993 Acura Integra (GS, GS-R, LS, RS). This Energy Suspension Hyper-Flex polyurethane bushing set is engineered to replace worn factory rubber, helping your vehicle maintain proper rear toe and caster settings under high-performance driving conditions. These bushings are especially critical for Integra owners running larger than stock wheel and tire combinations, where increased cornering loads can easily deflect soft OE rubber.

• Maintains consistent rear alignment for improved handling and predictability
• Black polyurethane construction for durability and chemical resistance
• Essential upgrade for vehicles with oversized wheels or performance tires
• Designed for high-load performance and street applications
• Note: Installation requires the reuse of all existing metal hardware and sleeves
• Manufacturer Part Number: 16.7107G

Fits select 1988-2001 Acura Integra and Honda Civic, CRX, and Civic del Sol models.

Upgrade your vehicle's handling and suspension geometry with Energy Suspension Rear Trailing Arm Bushings (16.7106R). These high-performance polyurethane components are engineered to replace the compliant factory rubber units that often tear or deflect under load. By minimizing unwanted trailing arm movement, these bushings ensure your vehicle maintains proper rear toe and caster settings during aggressive cornering and high-performance driving conditions.

These bushings are a critical upgrade for enthusiasts running larger-than-stock wheel and tire combinations, where increased mass puts additional strain on OEM suspension mounts. The result is more predictable handling, improved rear-end stability, and reduced tire wear caused by alignment shifts during weight transfer.

• Precision Alignment: Helps maintain consistent rear toe and caster under high-performance driving loads.
• Hyper-Flex Polyurethane: Durable construction resists rot and degradation from road chemicals and oils better than factory rubber.
• Enhanced Stability: Provides a firm, responsive feel essential for track use or spirited street driving.
• Fitment Focus: Designed specifically for the trailing arm pivot point on select Acura and Honda chassis.
• Manufacturer Part Number: 16.7106R

Fits select 1988-2001 Honda Civic, CRX, and del Sol models, and 1994-2001 Acura Integra.

These Energy Suspension rear trailing arm bushings are re-engineered to solve the common issue of dynamic alignment changes during spirited driving. By replacing soft, worn-out rubber with high-performance polyurethane, these bushings help the vehicle maintain critical rear toe and caster settings. This stability is especially vital for vehicles running larger-than-stock wheel and tire combinations where increased leverage can strain factory components.

Designed for long-term durability, these bushings provide the structural integrity needed to handle high-performance conditions without the deflection found in original equipment. They are a direct replacement part, ensuring your suspension geometry remains consistent under load for more predictable handling and better tire wear.

• Maintains proper rear toe and caster during high-performance driving
• Crucial upgrade for vehicles equipped with oversized wheels and tires
• Engineered for precise fitment and improved suspension response
• Replaces prone-to-failure OE rear trailing arm bushings
• Manufacturer Part Number: 16.7106G

Fits 1988-1991 Honda Civic and CRX across all submodels including Base, DX, EX, LX, HF, Si, and Wagovan.

Upgrade your vehicle's suspension response with the Energy Suspension Hyper-Flex Front Strut Rod Bushing Set. These components are engineered to replace the prone-to-failure OE rubber bushings that often lead to "wheel roll-under" during hard braking and excessive wheel hop during standing starts. By utilizing high-durometer polyurethane, these bushings provide a more rigid connection for the strut rods, which control the longitudinal movement of the lower control arms.

Constructed from Energy Suspension's proprietary Hyper-Flex polyurethane, these bushings offer superior resistance to under-car contaminants like oil, salt, and road grime that typically degrade rubber. The result is a more stable alignment under cornering and braking loads, delivering a more predictable driving experience for both street and performance applications.

• Replaces soft, factory rubber bushings to improve front-end stability
• Reduces wheel hop and traction loss during acceleration
• Minimizes wheel roll-under during abrupt stops
• Manufactured from durable Hyper-Flex polyurethane
• Color: Red
• Manufacturer Part Number: 16.7102R

Fits 2006-2011 Honda Civic Si.

Restore and enhance your vehicle's cornering performance with Energy Suspension Hyper-Flex polyurethane front sway bar bushings. These 28mm bushings are designed to replace soft, compliant factory rubber that often deflects under load, causing vague steering and increased body roll. By securing the sway bar more effectively, these polyurethane components allow the sway bar system to operate at maximum efficiency, providing a more predictable and responsive driving experience.

Constructed from Energy Suspension's proprietary Hyper-Flex polyurethane, these bushings offer superior resistance to under-car contaminants such as oil, road salt, and ozone. Unlike OEM rubber which degrades and cracks over time, these high-performance bushings maintain their shape and durometer for long-lasting chassis stability.

• Material: Hyper-Flex Polyurethane
• Sway Bar Diameter: 28mm
• Position: Front
• Color: Red
• Manufacturer Part Number: 16.5146R

Fits 2006-2011 Honda Civic Si.

Restore handling precision and eliminate the sloppy feel of aged factory suspension with this Energy Suspension front sway bar bushing set. These 28mm bushings are engineered to replace compliant OEM rubber that deflects under load, ensuring your sway bar responds instantly to cornering forces. By maintaining proper bar alignment and reducing unwanted movement at the mounting points, this kit allows the factory sway bar system to operate at peak efficiency.

Manufactured from Energy Suspension’s proprietary Hyper-Flex polyurethane, these bushings are far more durable than standard rubber. They resist degradation from road salt, oil, and ozone, providing a long-lasting performance solution that maintains its shore hardness over time. This set is designed as a direct-fit replacement for the 28mm front sway bar found on the eighth-generation Civic Si.

• Part Number: 16.5146G
• Bushing Diameter: 28mm
• Position: Front
• Material: Hyper-Flex Polyurethane
• Finish: Black
• Fitment: Replaces factory 28mm sway bar bushings

Fits 2001-2004 Honda Civic (DX, EX, GX, HX, Hybrid, LX, Si, and Value Package).

Energy Suspension Hyper-Flex polyurethane front sway bar bushings provide a significant performance upgrade by replacing soft, compliant factory rubber. These 1-inch bushings allow your sway bar to react more quickly to cornering loads, reducing body roll and improving steering precision. Unlike OEM rubber that degrades over time when exposed to road contaminants, Hyper-Flex polyurethane is formulated to resist oils, salt, and atmospheric conditions for long-lasting performance.

• Material: High-performance Hyper-Flex polyurethane
• Size: 1-inch (25.4mm) ID for 1-inch front sway bars
• Finish: Red
• Replaces worn OE rubber bushings to restore and enhance handling
• Superior resistance to vehicle fluids and road grime
• Manufacturer Part Number: 16.5133R

Fits 2002-2004 Acura RSX Base and Type-S.

Improve your vehicle's handling and steering response by replacing soft factory rubber with Energy Suspension Hyper-Flex polyurethane front sway bar bushings. These 23mm bushings are engineered to hold the sway bar more securely than OEM components, significantly reducing deflection and allowing the stabilizer system to work at maximum efficiency. This upgrade results in flatter cornering and a more predictable, connected feel through the chassis.

Energy Suspension's proprietary Hyper-Flex polyurethane is formulated to resist road oils, chemicals, and ozone, ensuring these bushings will not rot or deteriorate like standard rubber. This kit provides a direct-fit performance solution for the front sway bar system on the 2002-2004 RSX.

• Manufacturer Part Number: 16.5131R
• Bushing Diameter: 23mm
• Material: Hyper-Flex Polyurethane
• Color: Red
• Position: Front
• Replaces compliant OEM rubber bushings

Fits 1999-2000 Honda Civic Si.

Improve your vehicle's handling response with Energy Suspension Hyper-Flex polyurethane front sway bar bushings. Factory rubber bushings are prone to deflection and rot, which delays sway bar engagement and allows for excessive body roll. These 26mm performance bushings eliminate that unwanted compliance, ensuring your sway bar system operates at maximum efficiency for flatter, more predictable cornering.

Constructed from proprietary Hyper-Flex polyurethane, these bushings are designed to withstand the harsh conditions of the undercarriage. They are highly resistant to oil, road salt, and ozone, outlasting standard OEM rubber components while maintaining consistent performance. This kit provides a direct-fit solution for the 26mm front anti-roll bar on the EM1 chassis.

• Bar Diameter: 26mm
• Position: Front
• Material: Hyper-Flex Polyurethane
• Color: Red
• Resistance: Oil, grease, and road contaminants
• Manufacturer Part Number: 16.5130R

Fits 1992-2001 Honda Prelude S, SE, Si, Si 4WS, Type SH, and VTEC.

Replace compliant, worn-out OEM rubber bushings with Energy Suspension Hyper-Flex polyurethane for improved suspension geometry and handling response. This 25mm front sway bar bushing set eliminates the deflection associated with factory rubber, allowing your sway bar system to operate at maximum efficiency. This kit provides a firmer pivot point, which helps reduce body roll and increases predictability during high-load cornering.

• Material: Performance-grade Hyper-Flex polyurethane
• Sway Bar Diameter: 25mm
• Color: Red finish
• Components: Includes front sway bar bushings and end link bushings
• Installation: Direct replacement for factory rubber components
• Part Number: 16.5123R

Fits 1992-2001 Honda Prelude models including S, SE, Si, Si 4WS, Type SH, and VTEC.

Upgrade your vehicle's handling and steering response by replacing soft, degraded factory rubber with Energy Suspension Hyper-Flex polyurethane front sway bar bushings. This 23mm kit allows your sway bar system to operate at peak efficiency, effectively reducing body roll and improving cornering stability. The polyurethane construction is engineered to withstand the elements, including road salt and oil, which typically cause OEM rubber bushings to crack and fail over time.

• Bore Diameter: 23mm
• Material: Hyper-Flex Polyurethane
• Finish: Black
• Component Type: Sway Bar Bushings and End Link Bushings
• Manufacturer Part Number: 16.5122G
• Maintains alignment and reduces suspension deflection

Fits 1996-1998 Honda Civic CX, DX, EX, HX, and LX.

Improve your vehicle's handling and suspension response with Energy Suspension Hyper-Flex polyurethane front sway bar bushings. Factory rubber bushings are prone to cracking, rotting, and distorting over time, which leads to vague steering response and excessive body roll. These 22mm red bushings provide a more secure mounting point for your front sway bar, allowing the anti-roll system to work at 100% efficiency.

By minimizing deflection, these polyurethane components improve the effectiveness of your existing sway bar, providing characteristics similar to a larger, higher-performance bar. The Hyper-Flex material is engineered to be more durable than OEM rubber, resisting degradation from road salt, oils, and other common contaminants.

• Material: Hyper-Flex Polyurethane
• Color: Red
• Bore Diameter: 22mm
• Position: Front
• Manufacturer Part Number: 16.5121R
• Includes: Pair of sway bar bushings

Fits 1996-1998 Honda Civic (CX, DX, EX, HX, LX).

Eliminate the slop and delayed steering response caused by worn-out factory rubber with Energy Suspension 22mm front sway bar bushings. These performance bushings are a direct replacement for 1996-1998 Honda Civic models, engineered to hold the sway bar firmly against the chassis. By reducing the deflection common in OE rubber, your vehicle's sway bar system operates at 100% efficiency, providing flatter cornering and improved handling characteristics.

These bushings are molded from proprietary Hyper-Flex polyurethane, a material that outlasts standard rubber and resists degradation from road salt, oils, and environmental grime. This kit is a cost-effective alternative to replacing the entire sway bar, delivering a significant upgrade in suspension feel and durability.

• Manufactured from high-performance Hyper-Flex polyurethane
• Direct fit for 22mm factory front sway bars
• Includes two (2) front sway bar bushings
• Black finish for a clean, professional look
• Manufacturer Part Number: 16.5121G

Fits select 1990-2001 Acura Integra, Honda Accord, and Honda Odyssey models. This pair of 14mm rear sway bar bushings provides a significant handling upgrade by replacing soft factory rubber with Energy Suspension’s proprietary Hyper-Flex polyurethane.

Standard rubber bushings deflect under cornering loads, allowing the sway bar to shift and reducing its effectiveness. These polyurethane replacements are engineered to withstand the rigors of performance driving and environmental exposure, ensuring your sway bar system operates at maximum efficiency. This result is a more responsive chassis and flatter cornering without the high cost of a complete aftermarket sway bar kit.

• Replaces worn OE rubber bushings to restore and improve suspension geometry
• Constructed from Hyper-Flex polyurethane for superior durability and deflection resistance
• Specifically sized for 14mm rear sway bars
• Resistant to vehicle fluids, road salt, and ozone
• Color: Red
• Manufacturer Part Number: 16.5116R

Fits 1990-1993 Acura Integra GS, GS-R, LS, and RS.

Energy Suspension Hyper-Flex front sway bar bushings provide a significant upgrade to your Integra's suspension by replacing soft factory rubber with high-performance polyurethane. These 23mm bushings minimize deflection and body roll, ensuring your sway bar maintains proper geometry for more precise steering response and improved handling during cornering.

Unlike OEM rubber that degrades when exposed to road salt, oil, and ozone, these polyurethane bushings are engineered for superior longevity. This kit is designed for a direct-fit installation into the factory mounting locations, allowing your sway bar system to operate at maximum efficiency.

• Manufacturer Part Number: 16.5113R
• Material: Hyper-Flex Polyurethane
• Bore Diameter: 23mm
• Color: Red
• Replaces compliant OE rubber bushings
• Improves chassis rigidity and cornering stability

Fits select 1988-1993 Honda Civic, CRX, and Acura Integra models.

Improve your vehicle's handling and cornering stability by replacing soft, worn-out OE rubber bushings with Energy Suspension Hyper-Flex polyurethane 15mm rear sway bar bushings. Unlike factory rubber that deflects and degrades under stress, these high-performance polyurethane bushings maintain their shape, allowing your rear sway bar to operate at maximum efficiency for flatter cornering and more predictable steering response.

These bushings are engineered from Energy Suspension's proprietary Hyper-Flex polyurethane, which is specifically formulated to resist road contaminants like oil, salt, and grease that typically cause rubber components to rot and fail. This kit is designed as a direct-fit solution for vehicles equipped with a 15mm factory rear sway bar.

• Increases sway bar effectiveness by reducing bushing deflection
• Manufactured from durable Hyper-Flex polyurethane
• Resistant to road oils, chemicals, and atmospheric ozone
• Direct replacement for 15mm factory rear sway bar bushings
• Manufacturer Part Number: 16.5112G

Fits 1988-1991 Honda Civic and CRX models (Base, DX, EX, LX, Si, Wagovan, HF).

Improve your vehicle's cornering and steering response by replacing worn factory rubber with Energy Suspension Hyper-Flex polyurethane front sway bar bushings. These 19mm bushings are designed to eliminate the slop and deflection common in OE rubber, allowing your sway bar to work with 100% efficiency. By maintaining the alignment of the bar, these components provide handling characteristics similar to a larger aftermarket sway bar without the added weight or cost.

Constructed from Energy's proprietary Hyper-Flex polyurethane, these bushings (MPN: 16.5111R) are resistant to road contaminants, oil, and ozone, ensuring they outlast and outperform traditional rubber components. This is a direct-fit upgrade for models equipped with a 19mm factory front sway bar.

• Material: Hyper-Flex Polyurethane
• Bushing Diameter: 19mm
• Color: Red
• Position: Front
• Part Number: 16.5111R

Fits 1988-1991 Honda Civic and CRX models.

Improve your vehicle's handling response and stability with Energy Suspension Hyper-Flex polyurethane front sway bar bushings. While factory rubber bushings are prone to softening and cracking over time, these 18mm polyurethane replacements are engineered to withstand the harshest undercar environments, including exposure to oil, road salt, and ozone. By reducing the compliance and deflection found in OE rubber, these bushings allow your front sway bar to function more effectively, sharpening steering precision and reducing body roll during cornering.

• Hyper-Flex™ polyurethane construction offers superior durability over OEM rubber
• Increases sway bar efficiency for flatter, more predictable cornering
• Resistant to oils, grease, and atmospheric contaminants
• Specifically sized for 18mm front sway bars
• Color: Red
• Manufacturer Part Number: 16.5110R

Fits 1988-1991 Honda Civic and CRX.

Energy Suspension Hyper-Flex polyurethane front sway bar bushings are a critical upgrade for the fourth-generation Honda Civic and CRX suspension. These 18mm bushings replace soft, deteriorated factory rubber to allow your sway bar system to operate at maximum efficiency. By significantly reducing bushing deflection, these components help maintain flatter cornering and sharper steering response during spirited driving or daily commutes.

• Manufactured from proprietary Hyper-Flex polyurethane for superior durability and lifespan
• Resistant to automotive oils, road salt, and environmental degradation that kills OEM rubber
• Improves sway bar effectiveness by reducing slop in the mounting points
• Direct-fit design for 18mm diameter front sway bars
• Finish: Black
• Manufacturer Part Number: 16.5110G

Fits select 1992-2001 Acura Integra, Honda Civic, and Honda Civic del Sol models equipped with a 22mm front sway bar. This Energy Suspension Hyper-Flex polyurethane bushing set replaces soft, worn-out OEM rubber to restore steering response and maximize sway bar efficiency.

Factory rubber bushings are prone to deflection, cracking, and rot over time, which leads to sloppy handling and increased body roll. These performance bushings are engineered from Energy Suspension's proprietary Hyper-Flex polyurethane, providing a firmer pivot point that allows your sway bar to react more quickly to cornering loads. The 22mm bore is precision-molded for a tight fit on the stabilizer bar, ensuring consistent performance under demanding driving conditions.

• Bushing Color: Red
• Bore Diameter: 22mm
• Material: Hyper-Flex Polyurethane
• Location: Front Sway Bar
• More durable and resistant to oils and road contaminants than rubber
• Maintains alignment and sway bar geometry for improved handling
• Manufacturer Part Number: 16.5108R