Fits 2001-2004 Honda Civic and 2002-2004 Acura RSX (Base, Type-S, and Si models).

Replace soft, mushy factory rubber with the Energy Suspension Hyper-Flex Black Front Control Arm Bushing Set (16.3116G). Engineered to provide a more precise steering response, these high-performance polyurethane bushings maintain proper suspension geometry and wheel alignment under extreme conditions. Unlike standard rubber that degrades from heat, road chemicals, and ozone, these polyurethane components are designed to withstand the rigors of the street and track for long-lasting durability.

• Manufactured from Energy Suspension’s proprietary Hyper-Flex performance polyurethane
• Maintains better wheel alignment during hard cornering and braking
• Full-floating and non-binding design ensures smooth suspension operation
• Resistant to road oils, atmospheric contaminants, and mechanical wear
• Direct replacement set that fits into stock control arms
• Manufacturer Part Number: 16.3116G

Fits 1988-1991 Honda Civic and CRX.

Upgrade your vehicle's handling and suspension response with the Energy Suspension Hyper-Flex Front Control Arm Bushing Set. Factory rubber bushings are prone to deterioration and excessive deflection over time, which compromises wheel alignment and steering precision. These polyurethane replacements provide the necessary rigidity to maintain geometry under load while remaining durable enough for long-term street or track use.

The 16.3103G kit features a full-floating, non-binding design that allows the control arms to pivot smoothly through their intended range of motion. This improves cornering stability and overall vehicle control without the binding common in worn rubber components or the excessive harshness of solid metal bearings.

• Replaces soft, worn-out OE rubber bushings for improved feedback
• Constructed from Energy Suspension proprietary Hyper-Flex performance polyurethane
• Maintains consistent alignment settings under extreme driving conditions
• Resistant to oil, road salt, and atmospheric contaminants that degrade rubber
• Color: Black
• Manufacturer Part Number: 16.3103G

Protect your vehicle's suspension and chassis from bottoming out with the Energy Suspension Hyper-Flex Ultra Low bump stop. This low-profile button head snubber is specifically designed for applications where clearance is limited, providing a critical cushion during full suspension compression to prevent expensive damage to control arms, traction bars, or leaf springs.

Constructed from Energy Suspension's proprietary Hyper-Flex performance polyurethane, these stops are engineered to outlast and outperform factory rubber components. They feature a specially designed mechanical interlock to ensure the polyurethane remains securely bonded to the hardware, even under the stresses of competition or heavy-duty use.

• Manufacturer Part Number: 9.9132G
• Material: Hyper-Flex polyurethane for superior oil and ozone resistance
• Design: Ultra Low profile button head for tight clearance requirements
• Durability: Features a mechanical interlock for high-strength bonding
• Application: Universal fitment for various suspension components
• Finish: Black

The Energy Suspension 9.9116R Hyper-Flex buttonhead bump stop is engineered to provide a durable cushion for collapsing suspension systems, preventing the metal-to-metal bottoming-out that causes vehicle damage. Featuring a low-profile buttonhead design, this snubber is specifically intended for use in applications where clearance is limited.

Unlike original equipment rubber stops that degrade over time, these are constructed from Energy Suspension’s proprietary Hyper-Flex performance polyurethane. This material is designed to withstand the heavy compression cycles of control arms, traction bars, and leaf springs while resisting oils and road chemicals. The mechanical interlock design ensures the polyurethane remains securely bonded under load for a long-lasting service life.

• Part Type: Buttonhead Bump Stop
• Material: Hyper-Flex Polyurethane
• Height: 1.0 inch
• Color: Red
• Design: Low-profile for limited clearance
• Manufacturer Part Number: 9.9116R

Protect your vehicle's chassis and suspension components with Energy Suspension 9.9104R universal bump stops. These 4.5-inch tall stops are designed to cushion a collapsing suspension, preventing the harsh bottoming-out that causes expensive damage to control arms, leaf springs, and traction bars. Unlike standard rubber snubbers that degrade over time, these are manufactured from Hyper-Flex performance polyurethane for superior durability and consistent durometer ratings.

• Prevents metal-on-metal contact and bottoming-out damage
• Constructed from Hyper-Flex™ performance polyurethane for chemical and weather resistance
• Large competition-style design features a reinforced metal plate welded to the mounting plate and molded into the stop
• Specially designed mechanical interlock for secure attachment
• Dimensions: 4.5in Tall x 4.5in Long x 2.5in Wide
• Color: Red
• Quantity: Set of 2
• Part Number: 9.9104R

Upgrade your suspension response with the Energy Suspension 9.8145R Performance Polyurethane Shock Bushing Set. These red polyurethane bushings are engineered for universal front or rear applications utilizing a large shock tower bayonet end style. Unlike factory rubber bushings that compress and deflect under load, these polyurethane components provide a firmer mounting point, ensuring shock valving reacts immediately to road inputs for improved damping control.

Constructed from Energy Suspension’s proprietary Hyper-Flex polyurethane, these bushings are resistant to road oils, salts, and environmental degradation that typically cause OE rubber to crack and fail. This 4-piece set provides the necessary hardware to refresh a pair of shock mounts with high-durability components that maintain alignment and performance over time.

• Manufacturer Part Number: 9.8145R
• Fitment Style: Large Shock Tower Bayonet End
• Material: Hyper-Flex Performance Polyurethane
• Nipple Dimension: 15/16 in.
• Inner Diameter (ID): 9/16 in.
• Color: Red
• Quantity: Set of 4 Bushings

Fits select 1961-1999 Ford Escort, Mercury Comet/Monarch, Nissan 280ZX, and Toyota Celica, Corolla, and Supra.

Replace soft, compliant factory rubber bushings with the Energy Suspension Hyper-Flex performance polyurethane end link set. Rubber bushings are prone to cracking and distortion over time, leading to excessive body roll and sloppy handling. These polyurethane replacements are engineered to maintain alignment and provide a more stable connection between your sway bar and the suspension, significantly improving steering response and cornering control.

Built to withstand the rigors of both daily driving and competitive use, this set is resistant to road oils, salt, and environmental degradation that typically destroys OEM components. By reducing bushing deflection, this kit helps eliminate wheel hop and traction loss during aggressive maneuvers.

• Part Number: 9.8122G
• Material: Hyper-Flex™ Performance Polyurethane
• Finish: Black
• Increased durability and longevity over standard rubber
• Restores handling precision and vehicle stability
• Includes heavy-duty metal components where applicable
• Easy installation into factory mounting points

Fits select 1982-2004 Chevrolet S10 and Blazer, and GMC S15, Jimmy, and Sonoma models.

Over time, factory rubber spring isolators dry rot, crack, and compress, leading to unwanted noise and diminished ride quality. This Energy Suspension spring isolator set is engineered from their proprietary Hyper-Flex polyurethane, a superior material designed to withstand the elements and mechanical stress that destroy traditional rubber. These isolators serve as a durable replacement that can last 3 to 10 times longer than OE components while maintaining factory ride characteristics.

Designed to bolt directly into the chassis exactly like the original equipment, these polyurethane isolators provide a stable seat for your springs and can even assist in restoring lost vehicle height caused by saggy, worn-out rubber. Whether you are performing a suspension refresh or a complete restoration, these components offer the longevity and performance needed for GM S-series trucks and SUVs.

• Manufactured from premium Hyper-Flex polyurethane for maximum durability
• Resistant to oil, road salt, and ozone for long-term reliability
• Maintains original ride quality without adverse harshness
• Installs into factory mounting points without modification
• Manufacturer Part Number: 9.6102R
• Color: Red

Upgrade your vehicle's suspension response with Energy Suspension Hyper-Flex polyurethane sway bar bushings. These 32mm universal greaseable bushings are engineered to replace soft, prone-to-failure OEM rubber components that deflect under cornering loads. By minimizing movement at the mounting point, these bushings allow your sway bar to function more effectively, delivering flatter cornering and more predictable handling.

Constructed from proprietary Hyper-Flex polyurethane, these bushings are far more durable than factory rubber and resistant to degradation from road salt, oils, and environmental factors. The greaseable design features integrated Zerk fittings on heavy-duty zinc-plated brackets, ensuring smooth, quiet operation and easy maintenance to prevent squeaking. This kit provides a cost-effective performance improvement for any vehicle equipped with a 32mm sway bar.

• Bore Diameter: 32mm (1.25")
• Material: Hyper-Flex Polyurethane
• Finish: Black
• Feature: Greaseable design with Zerk fittings
• Includes: Pair of bushings and heavy-duty mounting brackets
• Manufacturer Part Number: 9.5166G
• Fitment: Universal application for 32mm diameter sway bars

Upgrade your vehicle's handling and stability with Energy Suspension Hyper-Flex greaseable front sway bar bushings. These bushings replace soft, prone-to-failure factory rubber components, allowing your sway bar system to operate at peak efficiency by significantly reducing deflection during cornering.

Constructed from Energy's proprietary Hyper-Flex polyurethane, these bushings are engineered for long-term durability and resistance to common road contaminants like oil, salt, and ozone. The greaseable design features heavy-duty brackets with integrated zerk fittings, allowing for easy periodic maintenance and quiet, squeak-free operation without the need for disassembly.

• Precision-molded for 31.5mm (1.24in) diameter front sway bars
• Greaseable brackets with zerk fittings for simplified maintenance
• Hyper-Flex polyurethane construction provides superior longevity over OEM rubber
• Increases sway bar effectiveness for improved steering response and reduced body roll
• Includes two bushings and two greaseable metal brackets
• Manufacturer Part Number: 9.5165G

Eliminate handling slop and improve chassis response with Energy Suspension Hyper-Flex greaseable sway bar bushings. These 28.5mm bushings are engineered to replace compliant OEM rubber units, which often deflect and degrade over time. By holding the sway bar more securely, these polyurethane bushings allow the bar to work at its full potential, reducing body roll and providing flatter cornering without the need for a complete bar replacement.

• Bore Size: 28.5mm (1-1/8 inch) for a precision fit on the sway bar.
• Hyper-Flex™ Polyurethane: Specialized material that resists rot from road salt, oil, and ozone while outlasting factory rubber.
• Greaseable Design: Integrated zirc fittings on the heavy-duty brackets allow for easy lubrication to ensure quiet, bind-free operation.
• Universal Fitment: Designed for a wide range of custom and OE applications requiring a 28.5mm mount.
• Part Number: 9.5164G

Replace soft, deteriorated factory rubber with Energy Suspension Hyper-Flex polyurethane 3/4 inch (19mm) sway bar bushings. Designed as a high-performance upgrade, these bushings (MPN 9.5156R) eliminate the excessive deflection associated with OE rubber, allowing your sway bar system to operate at maximum efficiency for flatter cornering and improved steering response.

Constructed from proprietary Hyper-Flex polyurethane, these bushings are engineered to withstand the harshest environments. Unlike natural rubber which rots and cracks over time, this material is resistant to road oils, salt, and ozone. This kit provides a cost-effective way to significantly improve handling characteristics and restore the tightness of your vehicle's suspension system.

• Bushing Diameter: 3/4 Inch (19mm)
• Material: Hyper-Flex Polyurethane
• Color: Red
• Manufacturer Part Number: 9.5156R
• Resistant to road chemicals and oils
• Outlasts and outperforms standard OEM rubber bushings

Fits 1994-1997 Honda Accord and 1995-1997 Honda Odyssey models. This kit replaces soft, prone-to-failure OE rubber bushings with high-performance Hyper-Flex polyurethane.

Energy Suspension 22mm front sway bar bushings are designed to maximize the efficiency of your vehicle's existing sway bar system. By reducing the deflection common in factory rubber mounts, these polyurethane bushings improve handling characteristics and cornering stability. The Hyper-Flex material is resistant to road salt, oil, and other contaminants that typically cause rubber to rot or crack, ensuring a longer service life and consistent performance.

• Manufacturer Part Number: 9.5126R
• Material: Proprietary Hyper-Flex Polyurethane
• Bushing Diameter: 22mm
• Color: Red
• Application: Front Sway Bar
• Increases sway bar efficiency for improved steering response
• Highly resistant to automotive fluids and ozone

Fits 1994-1997 Honda Accord and 1995-1997 Honda Odyssey.

Restore steering precision and reduce body roll with Energy Suspension Hyper-Flex polyurethane front sway bar bushings. Factory rubber bushings are prone to cracking and compression set over time, which creates slop in the suspension and delays the effectiveness of the sway bar. These 22mm performance bushings replace worn OE components to ensure your sway bar system works at peak efficiency, providing flatter cornering and more predictable handling.

• Product Line: Hyper-Flex Polyurethane
• Position: Front
• Sway Bar Diameter: 22mm
• Color: Black
• Manufacturer Part Number: 9.5126G
• Increased durability compared to OEM rubber
• Resistant to road oils, salt, and environmental degradation

Upgrade your vehicle's handling response with Energy Suspension 9.5124G universal sway bar bushings. These components are engineered to replace soft, compliant factory rubber bushings that deflect under load. By utilizing proprietary Hyper-Flex polyurethane, these 20mm bushings maintain the sway bar's position more effectively, allowing the stabilizer system to work at maximum efficiency for flatter cornering and improved driver feedback.

• Part Number: 9.5124G
• Diameter: 20mm Internal Diameter
• Material: Hyper-Flex Polyurethane (Black)
• Design: Non-greaseable universal fitment
• Durability: Highly resistant to road salt, oils, and ozone degradation
• Performance: Minimizes suspension deflection to improve sway bar rate and effectiveness

The 9.5124G set provides a cost-effective alternative to a full sway bar replacement by restoring and enhancing the performance of your existing stabilizer bar. These bushings are designed for long-term reliability and are significantly more durable than original equipment rubber.

Fits select 1995-2003 Toyota Avalon, 1997-2001 Camry, 1999-2003 Solara, and 2000-2004 Mitsubishi Eclipse (FWD).

Energy Suspension Hyper-Flex polyurethane sway bar bushings are engineered to replace soft, factory rubber components that often fail or distort under cornering loads. By utilizing a firmer, more durable material, these bushings allow your sway bar system to operate at maximum efficiency, providing an immediate improvement in handling characteristics and steering response. Unlike rubber, the Hyper-Flex polyurethane construction is resistant to automotive fluids and road contaminants, ensuring a significantly longer service life than OEM parts.

• Manufactured from high-performance Hyper-Flex polyurethane for superior durability
• Reduces body roll and improves steering response by minimizing bushing deflection
• Outlasts OEM rubber bushings and resists degradation from oil, road salt, and heat
• Designed for a straightforward installation into factory mounting positions
• Manufacturer Part Number: 9.5123R

Fits select 1995-2004 Toyota Avalon, Camry, Solara, and Mitsubishi Eclipse models. This Energy Suspension Hyper-Flex polyurethane sway bar bushing set is designed to replace soft, worn-out OEM rubber bushings that degrade over time, leading to sloppy handling and reduced suspension performance.

By utilizing Hyper-Flex polyurethane, these bushings provide a more rigid mounting point for the sway bar. This allows the sway bar system to operate at maximum efficiency, effectively reducing body roll and improving cornering response without the high cost of an aftermarket sway bar. Unlike factory rubber, this material is resistant to road oils, salt, and ozone, ensuring a much longer service life and consistent performance in diverse driving conditions.

• Manufacturer Part Number: 9.5123G
• Material: High-density Hyper-Flex polyurethane
• Provides more effective sway bar engagement for flatter cornering
• Increases suspension durability compared to standard rubber bushings
• Engineered for a direct fit to factory mounting locations
• Resistant to common under-car contaminants

Fits select 1992-1995 Honda Civic and CRX models.

Upgrade your vehicle's handling with Energy Suspension Hyper-Flex polyurethane front sway bar bushings. These 22mm red bushings are engineered to replace soft, compliant factory rubber, which often deflects under cornering loads. By providing a more stable mounting point for the sway bar, this kit allows the bar to engage more effectively, resulting in flatter cornering and improved steering response—similar to the effect of installing a larger performance sway bar.

Constructed from proprietary Hyper-Flex polyurethane, these bushings are designed to withstand the harsh environment of the undercar. Unlike OEM rubber that rots and cracks due to exposure to road salt, oils, and ozone, these polyurethane components maintain their shape and performance characteristics for a significantly longer service life.

• Increases sway bar system efficiency by reducing mounting point deflection
• Proprietary Hyper-Flex polyurethane construction for maximum durability
• Resistant to oil, grease, and atmospheric conditions
• Direct replacement for factory 22mm front sway bar bushings
• Manufacturer Part Number: 9.5108R
• Color: Red
• Bore Diameter: 22mm

Fits 2001-2004 Toyota Tacoma Pre Runner models.

Restore your truck's cab-to-bed alignment and ride height with the Energy Suspension Hyper-Flex body mount bushing set. Factory rubber mounts are prone to cracking, distorting, and crushing over time, which leads to body sag and misalignment. This kit replaces those soft OE components with a specially formulated polyurethane that provides a significant upgrade in durability without the harshness of solid aluminum mounts.

• Hyper-Flex Polyurethane: Specially formulated material that remains resilient under demanding road and trail conditions.
• Alignment Restoration: Corrects cab-to-bed sag and maintains proper body-on-frame positioning.
• Reinforced Design: Bushings feature molded-in zinc-plated steel rings for added strength and structural integrity where required.
• Street & Off-Road Performance: Engineered to provide a smooth ride while being rugged enough for heavy-duty use.
• Finish: Black polyurethane.
• Manufacturer Part Number: 8.4112G

Vehicle Fitment

Fits 1989-2000 Toyota 4Runner, Pickup, and Tacoma (Base, DLX, SR5, Limited, and Pre Runner). Replace degraded, distorted factory rubber body mounts with the Energy Suspension Hyper-Flex polyurethane cab mount set to restore proper body-to-frame alignment and ride height.

Standard rubber mounts are prone to cracking and crushing over time, leading to body sag and misalignment. While solid aluminum mounts are often too harsh for street applications, Energy Suspension's proprietary Hyper-Flex polyurethane provides a durable alternative that maintains structural rigidity without sacrificing ride quality. This set features zinc-plated steel rings molded into the bushings for maximum durability and reinforcement where the application requires it.

• Replaces worn-out OEM rubber mounts to maintain truck cab-to-bed alignment
• Manufactured from rugged HYPER-Flex polyurethane for long-term performance
• Zinc-plated steel rings molded in for added strength and corrosion resistance
• Resistant to road oils, salt, and environmental contaminants
• Engineered to provide a smooth ride while being tough enough for off-road use
• Manufacturer Part Number: 8.4103R

Fits 2001-2005 Lexus IS300 Base and Sportcross models.

Restore steering precision and suspension geometry to your vehicle with the Energy Suspension 8.3141R Front Control Arm Bushing set. These components are manufactured from Energy's proprietary Hyper-Flex performance polyurethane, which is specifically formulated to provide more rigidity than factory rubber without the harshness of solid mounts. By replacing worn OE bushings, you eliminate unwanted deflection, ensuring your suspension maintains proper alignment settings during heavy braking and aggressive cornering.

These bushings feature a full-floating, non-binding design that allows the control arms to pivot smoothly through their intended range of motion. This results in more predictable handling and improved road feel on the street or the track. Unlike organic rubber, Hyper-Flex polyurethane is resistant to oil, coolant, and road contaminants, providing a significantly longer service life.

• Manufactured from Hyper-Flex performance polyurethane for maximum durability
• Full-floating and non-binding design ensures smooth suspension travel
• Maintains critical alignment settings under extreme conditions
• Direct replacement for soft factory rubber bushings
• High-visibility red finish
• Manufacturer Part Number: 8.3141R

Fits select 2003-2008 Toyota Corolla, Toyota Matrix, and Scion tC. This Energy Suspension Front Control Arm Bushing Set is engineered to replace soft, factory rubber bushings that degrade over time and flex under load. Constructed from Energy's proprietary Hyper-Flex polyurethane, these red bushings provide the rigidity needed to maintain proper suspension geometry and wheel alignment during aggressive cornering, hard braking, and daily driving.

The full-floating, non-binding design ensures smooth suspension articulation for more predictable handling and improved steering response. Unlike standard rubber, polyurethane is resistant to oils, road salts, and environmental contaminants, offering a significantly longer service life while retaining performance characteristics. These bushings are designed to install directly into your vehicle's factory control arms.

• Maintains consistent alignment and improves overall vehicle control
• Hyper-Flex polyurethane construction for maximum durability and performance
• Full-floating design prevents binding for smoother suspension operation
• Resistant to vehicle fluids and road contaminants
• Color: Red
• Manufacturer Part Number: 8.3120R

Fits select 1992-2003 Lexus ES300 and Toyota Avalon, Camry, and Solara models. This Energy Suspension Hyper-Flex Rear Control Arm Bushing Set (8.3118R) is engineered to replace soft, worn-out OEM rubber bushings that cause alignment shift and vague handling. By utilizing high-durometer polyurethane, these bushings maintain proper suspension geometry under heavy cornering loads, ensuring your vehicle stays planted on the street or track.

The "full floating" and non-binding design allows the control arms to pivot smoothly through their intended range of motion without the friction or stiction associated with old rubber. Unlike factory components, Energy Suspension's polyurethane formula is resistant to road salt, oils, and ozone, providing a significant upgrade in both durability and steering response.

• Manufacturer Part Number: 8.3118R
• Material: Hyper-Flex performance polyurethane
• Color: Red
• Position: Rear Control Arm
• Condition: Replaces factory bushings in stock control arms
• Design: Full floating and non-binding for smooth operation

Fits 1981-1989 Toyota Land Cruiser Base models.

Replace soft, worn-out factory rubber with the Energy Suspension 8.2106R Hyper-Flex polyurethane front leaf spring bushing set. Engineered specifically for the 1981-1989 Toyota Land Cruiser, these red bushings provide the necessary rigidity to maintain proper suspension geometry under load, during heavy braking, and while navigating off-road terrain.

Unlike standard rubber that degrades over time due to road salt, oil, and ozone, Energy Suspension's proprietary Hyper-Flex material is formulated for extreme durability, lasting significantly longer than OEM components. This set ensures your front leaf springs function as intended, reducing unwanted deflection and improving overall steering response and vehicle control.

• Precision-molded Hyper-Flex polyurethane construction
• Resistant to automotive fluids and environmental degradation
• Reduces suspension deflection for better handling and control
• Color: Red
• Quantity: Set of 12
• Manufacturer Part Number: 8.2106R

Fits 1980-1985 Toyota Pickup (Base, DLX, SR5).

The Energy Suspension Hyper-Flex Master Bushing Set (8.18102R) is a comprehensive suspension solution designed to replace aging, degraded factory rubber. Unlike standard OEM bushings that rot and lose their shape over time, Hyper-Flex polyurethane components are engineered for maximum durability and resistance to undercar chemicals like oils, coolants, and environmental pollutants. These high-durometer bushings maintain their integrity under the most demanding conditions, whether on the race track, off-road, or for daily street use.

By installing this master set, you restore the suspension stability of your Toyota truck, ensuring it maintains proper caster and camber alignment. This reduction in suspension deflection translates to better handling, improved braking control, and a significant decrease in wheel hop during hard acceleration. These components are designed to outlast rubber five-to-one, providing a cost-effective performance upgrade that keeps your suspension geometry precise.

• Manufacturer Part Number: 8.18102R
• Material: Hyper-Flex Performance Polyurethane (Red)
• Replaces worn factory rubber to restore alignment and stability
• Resistant to oils, chemicals, and UV exposure
• Improves cornering, braking, and acceleration control
• Proudly Made in America

Fits select 2007-2023 Toyota Tundra and Lexus GX460 models.

Restore steering precision and eliminate the "spongy" feel caused by worn factory components with the Energy Suspension Rack and Pinion Bushing Set. Factory rubber bushings are prone to softening and cracking over time, which leads to steering wander and inconsistent alignment. This kit replaces those pliable mounts with high-performance Hyper-Flex polyurethane, providing a firmer, more direct connection between the steering rack and the chassis.

Engineered for durability, these bushings are resistant to under-car fluids and road contaminants that typically degrade rubber. This upgrade is particularly beneficial for vehicles equipped with larger tires or lift kits, as the increased leverage of oversized wheel setups often accelerates the wear of OE steering components.

• Improves steering response and directional stability
• Constructed from proprietary Hyper-Flex polyurethane
• Outlasts and outperforms standard rubber components
• Resistant to oils, grease, and environmental debris
• Color: Red
• Manufacturer Part Number: 8.10107R

Fits select 2000-2007 Toyota Tundra and Sequoia models.

Restore steering precision and eliminate the vague feedback caused by worn-out factory mounts with the Energy Suspension Hyper-Flex Steering Rack Bushing Set (8.10104R). Over time, original equipment rubber bushings soften and crack due to heat, road salt, and oil exposure, allowing the steering rack to shift under load. This polyurethane upgrade provides a more rigid and stable mounting solution, ensuring the rack remains properly aligned for sharper handling and better driver feedback.

• Manufactured from proprietary Hyper-Flex polyurethane for superior durability and performance
• Outlasts factory rubber and resists degradation from oils, coolants, and road grime
• Reduces steering rack deflection to maintain alignment and improve response
• High-visibility red finish for easy inspection
• Engineered for a precise fit in the factory mounting locations
• Manufacturer Part Number: 8.10104R

Fits select 1987-1997 Nissan D21, Pathfinder, and Pickup models.

Upgrade your vehicle's handling and suspension stability with Energy Suspension's Hyper-Flex polyurethane front strut rod bushings. These components are engineered to replace the prone-to-failure OEM rubber bushings, which often soften over time, leading to unwanted wheel movement and alignment shifts.

By installing these performance bushings, you significantly reduce wheel roll-under during heavy braking and minimize wheel hop during hard acceleration. The Hyper-Flex material is resistant to oils, chemicals, and road salt that typically degrade factory rubber, ensuring long-lasting alignment accuracy under extreme driving conditions.

• Material: Hyper-Flex performance polyurethane
• Color: Red
• Manufacturer Part Number: 7.7106R
• Primary Function: Replaces soft factory bushings to maintain alignment and reduce wheel roll-under
• Durability: Resistant to environmental contaminants and petroleum products

Fits select 1987-1997 Nissan D21, Pathfinder, and Pickup (2WD/4WD).

Replace compliant, short-lived factory rubber bushings with Energy Suspension Hyper-Flex polyurethane to restore steering precision and suspension geometry. These front strut rod bushings are engineered to eliminate "wheel roll-under," a common issue where the front wheels pull backward during abrupt stops or hard braking. By providing a more stable pivot point than OEM rubber, these components better maintain proper wheel alignment under extreme conditions.

Constructed from Energy Suspension’s proprietary Hyper-Flex polyurethane, these bushings offer superior resistance to under-car contaminants like oil, road salt, and ozone that quickly degrade standard rubber. This upgrade is essential for vehicles equipped with performance tires or those used in off-road environments where suspension loads are significantly increased.

• Manufacturer Part Number: 7.7106G
• Material: Hyper-Flex Polyurethane
• Color: Black (Graphite Impregnated)
• Prevents wheel hop and traction loss during hard acceleration
• Direct replacement for soft factory strut rod bushings
• Engineered for 2WD and 4WD Nissan truck and SUV applications

Fits select 1968-1983 Nissan 240Z, 260Z, 280Z, 280ZX, 510, and 810.

Energy Suspension Hyper-Flex performance polyurethane bushings replace soft, degraded factory rubber to restore handling precision and steering response. These components are specifically engineered to reduce "wheel roll-under," a common issue during abrupt braking or when utilizing modern performance tires. By maintaining proper alignment under extreme conditions, these bushings provide more consistent suspension geometry and improved traction for both street and track applications.

• Manufactured from Energy's Hyper-Flex(TM) performance polyurethane for superior durability
• Maintains proper alignment under heavy cornering and braking loads
• Reduces wheel hop and traction loss during standing start accelerations
• Designed for long-lasting performance compared to short-lived OE rubber components
• Resistant to road oils, salts, and environmental degradation
• Manufacturer Part Number: 7.7102G

Fitment Table: