The Fel-Pro Performance 1025 engine cylinder head gasket is engineered to provide a reliable seal in high-output environments where standard gaskets often fail. Featuring a proprietary steel core laminate construction, this gasket is specifically designed to handle the increased cylinder pressures and cylinder head movement common in high-performance engines.

This gasket utilizes a specialized wire ring design encased in stainless steel armor surrounding each cylinder. This configuration concentrates sealing force around the combustion chamber—delivering roughly three times the sealing force of standard head gaskets—to ensure a positive seal even on imperfect surfaces. This "Installers' Advantage" design simplifies the job by solving common OE design issues and enhancing overall durability.

• Proprietary steel core laminate construction for superior torque retention.
• Stainless steel armor with wire rings for maximum combustion seal strength.
• Accommodates high cylinder pressures and performance head movement.
• Engineered for the real-world repair environment and imperfect sealing surfaces.
• Manufacturer Part Number: 1025

Note: This part is not intended for use on emission-controlled vehicles.

The Fel-Pro 1024 Steel Core Laminate Head Gasket is engineered specifically for the real-world repair environment, providing a dependable seal even on imperfect surfaces. This performance-grade gasket utilizes a solid steel core to provide maximum strength and durability while eliminating the need for cylinder head bolt retorquing after installation.

Equipped with Fel-Pro's proprietary Printoseal technology, this gasket features precisely embossed sealing beads at all critical areas to eliminate leak paths. The facing is constructed from graphite or reinforced fiber material and finished with a non-stick, anti-friction coating that seals minor surface irregularities and prevents sticking during future service.

• Manufacturer Part Number: 1024
• Material: Steel core laminate with steel armor for maximum combustion seal
• Sealing Technology: Precise Printoseal embossed beads at vital areas
• Finish: Proprietary non-stick anti-friction coating
• Design: No-retorque construction simplifies installation and saves time
• Application: Engineered for imperfect sealing surfaces in repair environments

The Fel-Pro 1022 engine cylinder head gasket is engineered specifically for the real-world repair environment, delivering a reliable seal on imperfect surfaces. This performance-grade gasket features a robust steel core laminate construction to ensure long-term durability and structural integrity under high combustion pressures.

• MPN: 1022
• No-Retorque Design: The solid steel core helps eliminate the need for retorquing head bolts, saving time during and after installation.
• Printoseal Technology: Precise, embossed sealing beads at all vital areas provide a superior seal to eliminate potential leak paths.
• Proprietary Coating: A nonstick, anti-friction coating helps seal small surface imperfections and accommodates thermal expansion.
• Steel Armor: Reinforced fiber or graphite facing material is supported by steel armor for maximum strength and blowout resistance.

Built for installers who need to solve sealing issues the first time, this Fel-Pro gasket is the professional choice for simplifying engine assembly while enhancing longevity.

The Fel-Pro 1021 cylinder head gasket is engineered specifically for the real-world repair environment, providing a reliable seal on imperfect sealing surfaces where standard gaskets often fail. This steel core laminate gasket is built to handle the heat and pressure of engines that have seen years of service, eliminating the need for cylinder head bolt retorquing.

• Steel Core Construction: The solid steel core provides superior strength and eliminates the requirement for retorquing head bolts after installation.
• Printoseal Technology: Features precise, embossed sealing beads at all vital areas to eliminate potential leak paths and ensure a positive seal.
• Proprietary Nonstick Coating: An anti-friction coating helps seal minor surface imperfections and simplifies future gasket removal.
• Engineered for Durability: Incorporates reinforced fiber or graphite facing material with steel armor for maximum combustion seal integrity.
• Repair Solutions: Designed to save time and address common OE design issues while enhancing long-term sealing longevity.
• Manufacturer Part Number: 1021

The Fel-Pro 1020 Performance series cylinder head gasket is engineered to handle the extreme cylinder pressures and cylinder head movement associated with high-output performance engines. Built with a robust steel core laminate, this gasket is specifically designed for the real-world repair environment, providing a dependable seal even on imperfect sealing surfaces.

This gasket features a specialized wire ring design encased in stainless steel armor, which concentrates sealing force around the combustion chamber. This configuration raises the combustion sealing force to approximately three times that of a standard head gasket, ensuring maximum seal strength where it is needed most.

• Wire Ring Design: Provides highly concentrated sealing around the combustion chamber to prevent leaks under high pressure.
• Stainless Steel Armor: Surrounds the cylinder bore for increased durability and blowout resistance.
• Steel Core Laminate: Delivers superior structural integrity and resilience in high-performance applications.
• Repair Solution: Engineered to solve sealing issues and accommodate head movement in modified engines.
• Part Number: 1020
• Usage Note: Not intended for use in emission-controlled vehicles.

The Fel-Pro 1013 head gasket is engineered specifically for the aftermarket repair environment, providing a reliable seal on engines with imperfect sealing surfaces. This performance-grade gasket (MPN 1013) utilizes a steel core laminate construction to ensure high-clamping force retention and eliminate the need for retorquing head bolts after installation.

• Steel Core Laminate: Provides a rigid foundation for strength and durability, helping to maintain torque over time without the need for periodic adjustments.
• Printoseal Technology: Features precise, embossed elastomeric sealing beads at critical areas to eliminate potential leak paths for coolant and oil.
• Advanced Facing Materials: Built with graphite or reinforced fiber facing and steel armor to withstand high combustion temperatures and pressures.
• Non-Stick Coating: A proprietary anti-friction coating aids in sealing small surface imperfections and simplifies gasket removal during future service.
• Repair Environment Focus: Designed to compensate for surface finishes that may not meet strict OEM specifications, saving time during the rebuild process.

The Fel-Pro 1012 performance cylinder head gasket is engineered specifically for the repair environment, where sealing surfaces may be less than perfect. This gasket features a robust stainless steel core laminate construction with graphite or reinforced fiber facing material, providing the structural integrity needed for high-demand applications. By utilizing a solid steel core, Fel-Pro eliminates the need for the time-consuming retorquing of head bolts after initial installation.

• MPN: 1012
• Construction: Stainless steel core laminate with steel armor for maximum durability.
• Printoseal Technology: Precise embossed sealing beads at critical areas to eliminate potential leak paths.
• Proprietary Coating: Nonstick anti-friction coating helps seal minor surface imperfections and irregularities.
• No Retorque Design: High-strength core maintains clamp load without requiring a heat cycle and retightening.
• Application: Designed to compensate for imperfect sealing surfaces common in engine rebuilds and repairs.

The Fel-Pro 1006 Steel Core Laminate Engine Cylinder Head Gasket is engineered specifically for the real-world repair environment, providing a reliable seal even on imperfect sealing surfaces. Constructed with a robust steel core and reinforced fiber or graphite facing, this gasket is built to handle the thermal expansion and high cylinder pressures found in performance and high-mileage engines.

• Printoseal Technology: Features precise, embossed sealing beads at vital areas to eliminate potential leak paths and ensure a superior seal.
• Steel Core Design: The high-strength steel core provides structural integrity and eliminates the need for retorquing head bolts after installation.
• Proprietary Coating: A nonstick, anti-friction coating helps seal minor surface imperfections and allows for easier removal during future service.
• Durability: Integrated steel armor ensures the gasket withstands the combustion environment for long-lasting performance.
• Part Number: 1006

Fits Chevrolet Small Block engines including 262, 265, 267, 283, 302, 305, and 307 cubic inch displacements.

The Fel-Pro 1003 Performance Race Head Gasket is engineered specifically for the high-demand racing environment and real-world repair scenarios where sealing surfaces may be less than perfect. This gasket features a robust steel core construction that maintains clamp load, eliminating the need for time-consuming head bolt retorquing after the initial heat cycle.

• Bore Diameter: 4.166 inches
• Printoseal Technology: Precision-embossed sealing beads at vital areas eliminate leak paths and ensure a superior seal.
• Premium Materials: Constructed with graphite or reinforced fiber facing material backed by steel armor for maximum durability under high cylinder pressures.
• Anti-Friction Coating: A proprietary nonstick coating seals minor surface imperfections while facilitating easier gasket removal during teardowns.
• No-Retorque Design: High-strength steel core maintains torque retention to simplify the installation process.
• MPN: 1003

The Fel-Pro 1002 Performance cylinder head gasket is engineered to handle the extreme cylinder pressures and head movement common in high-performance engine builds. Constructed from a durable steel core laminate, this gasket provides a reliable seal even on imperfect sealing surfaces found in the real-world repair environment.

At the heart of the Fel-Pro 1002 is a specialized wire ring design, inserted within stainless steel armor surrounding each cylinder. This architecture concentrates sealing force around the combustion chamber, delivering approximately three times the sealing force of standard head gaskets to ensure maximum combustion seal strength under load.

• Manufacturer Part Number: 1002
• Construction: Steel core laminate with stainless steel armor
• Sealing Technology: Integrated steel wire rings for high-pressure combustion sealing
• Performance: Designed specifically for performance engines to accommodate high cylinder pressures
• Emissions Note: Not intended for use in emission-controlled vehicles

The Fel-Pro 1000 Performance head gasket is engineered to withstand the extreme cylinder pressures and head movement common in high-output engines. Built with a steel core laminate, this gasket is specifically designed to provide a reliable seal on imperfect surfaces found in the real-world repair environment.

This gasket features a stainless steel armor surrounding each cylinder, incorporating a wire ring design. This configuration concentrates sealing force around the combustion chamber, providing approximately three times the sealing force of a standard head gasket for maximum combustion seal strength.

• Construction: Steel core laminate with stainless steel armor
• Sealing Technology: Integrated steel wire rings for high-pressure combustion sealing
• Performance: Delivers 3x the sealing force of standard gaskets
• Application: Designed for high-performance engines; not intended for emission-controlled vehicles
• Part Number: 1000

Fits select 2014-2020 Ford F-150 and Mustang models.

Fel-Pro VS50902R valve cover gaskets are engineered specifically for the aftermarket repair environment, where sealing surfaces may have minor imperfections from years of heat cycles. These gaskets utilize proprietary molded rubber compounds to ensure a consistent, long-life seal between the engine head and the valve cover, even on embossed cover flanges.

Designed for precision and ease of installation, the VS50902R set features integrated compression limiters. These limiters act as physical stops to help eliminate the risk of overtightening and gasket distortion during assembly. This kit includes the necessary components to restore a leak-free seal for a complete repair.

• Manufacturer Part Number: VS50902R
• Material: Proprietary molded rubber compound
• Design: Engineered for imperfect sealing surfaces and embossed flanges
• Safety: Includes application-specific compression limiters to prevent overtightening
• Format: Complete set for valve cover repair

Vehicle Fitment

Fits select 2002-2015 Acura and Honda vehicles, including Accord, Civic, CR-V, Element, Crosstour, ILX, RDX, RSX, and TSX.

The Fel-Pro VS50614R engine valve cover gasket set is engineered specifically for the aftermarket repair environment. Designed to provide a reliable seal even on aging or imperfect mating surfaces, this set utilizes a proprietary cork-rubber formulation for maximum conformability and durability. Every component is real-world tested on-vehicle to ensure precise fitment and leak-free performance.

• Engineered for Repairs: Specifically designed to seal imperfect surfaces found in the real-world repair environment.
• Proprietary Materials: Features a specialized cork-rubber formulation for superior sealing and recovery.
• Comprehensive Set: Includes necessary gaskets and seals to complete the valve cover service and prevent oil leaks.
• Validated Quality: Parts are tested and validated on-vehicle to ensure optimal performance on the road.
• Manufacturer Part Number: VS50614R

Fits select 1999-2020 Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, and Saab vehicles. This Fel-Pro valve cover gasket set is engineered specifically for the repair environment, providing a reliable, long-lasting seal even on imperfect or warped sealing surfaces. It replaces leaking factory gaskets to prevent oil loss and engine bay contamination.

• Engineered for Repair: Specifically designed to accommodate for surface irregularities in high-mileage engines.
• Proprietary Materials: Features a specialized cork-rubber formulation for superior conformability and resilience under thermal cycling.
• Complete Solution: Includes all necessary components for a professional-grade installation.
• Real-World Tested: Validated for fit and performance on the specific GM engine platforms listed.
• Manufacturer Part Number: VS50504R1

Fits 2011-2020 Ford F-250 and F-350 Super Duty models.

The Fel-Pro TCS46172 Engine Timing Cover Gasket Set is engineered specifically for the automotive repair environment, where sealing surfaces are often worn or no longer perfectly flat. This kit provides a reliable seal for the timing cover, addressing potential leaks during timing chain or belt maintenance. By using proprietary materials designed to conform to surface irregularities, this set ensures a professional-grade repair on high-mileage Ford Super Duty engines.

• Includes all necessary gaskets and seals required for a timing cover replacement
• Application-specific design ensures precise fitment and sealing
• Engineered for imperfect sealing surfaces to prevent oil leaks
• Validated for fit, form, and function for 2011-2020 Ford 6.2L engines
• Manufacturer Part Number: TCS46172

The Fel-Pro TCS45993 Engine Timing Cover Gasket Set is engineered specifically for the real-world repair environment, providing a dependable seal even on worn or imperfect mating surfaces. This comprehensive set includes the application-specific gaskets and seals required for a timing chain or belt replacement service, ensuring a leak-free installation that restores factory performance.

Fits select 1997-2020 GM vehicles, including Chevrolet Silverado, Corvette, and Camaro; GMC Sierra and Yukon; Cadillac Escalade and CTS; and select Hummer, Isuzu, and Pontiac models. Manufactured using proprietary materials, these components are validated for fit, form, and function to handle the thermal expansion and high-pressure demands of the timing system.

• Includes all necessary gaskets and seals for a complete timing cover repair
• Engineered for imperfect sealing surfaces using proprietary materials
• Application-specific design ensures a precise fit for GM 1997-2020 engines
• Validated for fit, form, and function to meet professional standards
• Manufacturer Part Number: TCS45993

Fits select 1988-1995 Buick, Chevrolet, Oldsmobile, and Pontiac models. This Fel-Pro TCS 45840 Timing Cover Gasket Set provides the essential components required for a leak-free seal during timing chain or belt maintenance. Designed specifically for the automotive repair environment, these gaskets utilize proprietary materials that effectively seal against imperfect or worn surfaces typically found in older engine blocks.

• Complete set includes the gaskets and seals necessary for a standard timing cover replacement job.
• Application-specific design ensures a precise fit for listed GM engine platforms.
• Engineered to compensate for surface irregularities, preventing recurring oil leaks.
• Validated for fit, form, and function to meet or exceed professional installation standards.

Specifications:

• Manufacturer Part Number: TCS 45840
• Component Type: Timing Cover Gasket and Seal Set
• Construction: Proprietary sealing materials for repair environments

Fits select 1979-2001 Ford, Mercury, and DeTomaso vehicles (4.2L / 5.8L).

The Fel-Pro TCS45449 Engine Timing Cover Gasket Set is engineered specifically for the aftermarket repair environment to deliver a reliable seal on high-mileage engines. Designed to compensate for imperfect sealing surfaces, this set includes the essential gaskets and seals required for a timing chain or belt replacement job. Fel-Pro utilizes proprietary materials and application-specific designs to ensure a precision fit where standard gaskets may fail.

• Includes all gaskets and seals necessary for a complete timing cover reseal
• Engineered and manufactured specifically for the unique demands of the repair environment
• Validated for fit, form, and function to provide an unsurpassed seal
• Application-specific design handles surface irregularities for leak-free performance
• Manufacturer Part Number: TCS45449

Fits select 2011-2020 Subaru (Ascent, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, WRX, XV Crosstrek), 2013-2016 Scion FR-S, and 2017-2020 Toyota 86.

Fel-Pro valve stem seals are engineered to provide a reliable seal in the professional repair environment, where sealing surfaces are often imperfect. These seals prevent oil from entering the combustion chamber via the valve guides, helping to eliminate blue exhaust smoke and reduce oil consumption. Each set is application-specific, utilizing the correct seal architecture—whether deflector (umbrella), O-ring, or positive seal—required for your engine's specific cylinder head design.

• Precision Engineering: Validated by Fel-Pro engineers for fitment and performance on Subaru FA and FB series engine platforms.
• Premium Materials: Constructed from proprietary materials selected for high-temperature durability and chemical resistance against modern engine oils.
• Installation Protection: Includes a dedicated installation tool to protect the inner seal lip from damage during assembly over the valve stem.
• Complete Set: Part number SS729331 includes the necessary seals for a full valve stem service.

Fits select 2011-2021 Subaru (Forester, Impreza, WRX, BRZ, Legacy, Outback, Crosstrek, XV Crosstrek), Toyota 86, and Scion FR-S.

The Fel-Pro OS30877 engine oil pan gasket set is engineered specifically for the real-world repair environment, where sealing surfaces are often less than perfect. This 11-bolt gasket set utilizes proprietary materials and innovative design features to compensate for surface irregularities, ensuring a reliable, leak-free seal on high-mileage blocks and oil pans.

• Precision Fit: Application-specific design ensures an exact fit for 11-bolt oil pan configurations.
• Repair-Focused Engineering: Specifically manufactured to help seal warped, pitted, or imperfect sealing surfaces.
• Complete Solution: Includes the essential components required for a professional oil pan gasket replacement.
• Expertly Validated: Rigorously tested and approved by Fel-Pro engineers to meet durability and performance standards.
• Manufacturer Part Number: OS30877

Fits select 1991-2016 Ford, Lincoln, Mercury, and Avanti models.

The Fel-Pro PermaDry Engine Oil Pan Gasket Set OS30725R is engineered for the professional repair environment, providing a reliable seal even on high-mileage vehicles with imperfect sealing surfaces. Constructed from high-grade molded rubber, this gasket set replaces worn or leaking OE seals to restore engine efficiency and prevent oil loss.

• PermaDry Molded Rubber: Proprietary rubber compounds ensure a consistent, long-life seal across the entire oil pan perimeter.
• Integrated Torque Limiters: Built-in spacers help prevent overtightening, eliminating gasket splitting and extrusion during installation.
• Aftermarket Validation: Designed, tested, and approved by Fel-Pro engineers to handle real-world repair conditions and non-pristine surfaces.
• Complete Repair Solution: Includes the necessary components for a standard oil pan gasket replacement.
• Specifications: Manufacturer Part Number OS30725R; molded rubber construction with integrated torque limiters.