The Firestone Ride-Rite Replacement Bellow (Model 267C) is a heavy-duty air spring designed to replace a worn or damaged bellow in existing Firestone air helper spring kits. Fits select 1980-2014 Cadillac, Chevrolet, Dodge, and Ford vehicles.

As a critical component for maintaining vehicle stability, this air spring restores your suspension's ability to level off-center loads and reduce bottoming out. By maintaining proper air pressure, it helps eliminate suspension fatigue and improves braking and handling performance when hauling heavy trailers or payloads. This bellow is engineered to withstand extreme environmental conditions, ensuring consistent performance from freezing winters to high-heat applications.

• Bellow Model: 267C
• Manufacturer Part Number: 6781 (W217606781)
• Direct replacement for Firestone Kit PNs: 2071, 2100, 2153, 2170
• Operating Temperature Range: -40°F (-40°C) to 180°F (82°C)
• Improves ride quality and restores load-leveling capacity
• Built for heavy-duty truck and van applications

Fits select 2002-2022 Chevrolet Express 3500, GMC Savana 3500, Ford Ranger, Nissan Frontier, NV1500, NV200, NV2500, and Toyota Tacoma.

The Firestone Ride-Rite Replacement Bellows (Part Number 6766) is a heavy-duty air spring designed to replace a worn or damaged bellows in your existing Firestone Ride-Rite air helper spring kit. Built with a 268C style air spring, this component restores the variable spring rate necessary to level your vehicle under load, improving braking effectiveness, steering control, and ride quality even during heavy hauling or towing.

Constructed from durable rubber with high-strength internal reinforcement, this replacement bellows is engineered for reliability in demanding environments. It features a 5/8" combo stud (5/8CF) for top mounting and a 1/2" pin (1/2PIN) on the bottom, ensuring a precise fit with your existing Ride-Rite hardware. Maintaining your air suspension system is critical for preventing bottoming out and ensuring tire-to-road contact under varying load conditions.

• Manufacturer Part Number: 6766
• Bellows Style: 268C
• Top Mounting: 5/8" Combo Stud (5/8CF)
• Bottom Mounting: 1/2" Pin (1/2PIN)
• Material: High-strength reinforced rubber
• Compatibility: Genuine Firestone Ride-Rite replacement part

Fits select 2008-2014 Cadillac, Chevrolet, and GMC SUVs including Escalade, Suburban 1500/2500, Tahoe, and Yukon/Yukon XL models.

The Firestone Coil-Rite Air Helper Spring Kit is engineered to provide a smoother ride and better control for vehicles equipped with coil spring suspensions. These air springs fit directly inside your existing rear coil springs to create a variable spring rate, allowing you to level your vehicle when hauling heavy cargo or towing. By maintaining a level stance, you improve steering geometry, balance, and braking effectiveness while preventing the rear suspension from bottoming out under load.

Constructed from durable, elastic polyurethane, these helper springs are designed to withstand harsh road conditions and extreme temperature fluctuations. Performance is easily adjusted by varying the air pressure to suit different load conditions, much like inflating a tire. This kit helps reduce tire wear and ensures your headlights remain properly aimed at the road for safer nighttime driving.

• Manufacturer Part Number: 4186
• Position: Rear
• Support Capacity: 500–1,000 lbs. per set (Do not exceed vehicle GVWR)
• Material: High-strength polyurethane construction
• Temperature Rating: -40°F (-40°C) to 180°F (82°C)
• Adjustable variable spring rate for superior load leveling
• Includes all necessary components for installation

Fits 2009-2019 Dodge Ram 1500, Ram 1500, and Ram 1500 Classic 2WD/4WD models.

The Firestone Coil-Rite Air Helper Spring Kit is engineered to enhance the load-carrying capacity and ride quality of vehicles equipped with rear coil spring suspensions. These air springs install directly inside your existing factory coil springs to create a variable spring rate, effectively leveling your truck under heavy loads and preventing bottoming out. By maintaining a level stance, the kit improves steering geometry, braking effectiveness, and headlight aiming for safer towing and hauling.

• Support Capacity: 500-1,000 lbs. per set (not to exceed vehicle GVWR)
• Material: Durable, high-strength elastic polyurethane
• Adjustability: Air pressure can be tuned to match specific load requirements
• Operating Temperature: -40°F (-40°C) to 180°F (82°C)
• Installation: Fits inside existing coil springs; reduces tire wear and improves stability
• Manufacturer Part Number: 4185

Fits select 2005-2024 Ford F-250 and F-350 Super Duty 4WD trucks.

Firestone Coil-Rite air helper springs are engineered to support your vehicle's front suspension by fitting directly inside the existing coil springs. By creating a variable spring rate, these polyurethane inserts help level your truck under heavy loads, maintaining proper headlight aim, steering geometry, and braking effectiveness. This kit allows you to adjust air pressure manually to match varying loads or road conditions, with performance altered as easily as inflating a tire.

• Support Capacity: 500–1,000 lbs per set (do not exceed vehicle GVWR)
• Material: Durable, elastic polyurethane for long-term stability and comfort
• Operating Temperature: -40°F (-40°C) to 180°F (82°C)
• Installation: Designed to fit inside existing OE front coil springs
• Manufacturer Part Number: 4160

Constructed from high-strength polyurethane, these helper springs prevent bottoming out and reduce tire wear while improving overall vehicle stability and balance during heavy-duty use.

Fits select 1997-2010 Jeep Wrangler, Grand Cherokee, and Commander models.

Firestone Coil-Rite air helper springs are engineered to enhance your vehicle's load-carrying capacity and ride quality by working directly within the existing rear coil springs. By creating a variable spring rate, these polyurethane inserts level the vehicle under load, which improves steering control, braking effectiveness, and overall stability while preventing the suspension from bottoming out.

Constructed from durable, elastic polyurethane, these air springs allow for precise pressure adjustments to match your specific cargo or towing requirements. Performance can be altered as easily as inflating a tire, ensuring your headlights stay properly aimed and tire wear is minimized regardless of road conditions.

• Supports 500–1,000 lbs. of load-carrying capacity per set (do not exceed vehicle GVWR)
• Manufactured from high-strength, durable polyurethane for long-term stability
• Operating temperature range: -40°F (-40°C) to 180°F (82°C)
• Improves handling and balance during heavy hauling or towing
• Adjustable air pressure for varying loads and road conditions
• Manufacturer Part Number: 4157

Fits 2020-2025 Jeep Gladiator models across all trims including Sport, Rubicon, Mojave, and Willys.

The Firestone Coil-Rite air spring kit is designed to support your Jeep Gladiator's rear coil springs, providing an adjustable spring rate to handle varying loads. By adding air pressure to these polyurethane bladders, you can eliminate rear-end sag, prevent bottoming out, and maintain a level stance when towing a trailer or hauling heavy gear. This system ensures your headlights stay aimed at the road and improves overall steering control and braking effectiveness.

This kit is a manual-fill system, allowing for independent inflation of each air spring to compensate for off-center loads. The no-drill installation utilizes the vehicle's factory suspension points for a straightforward setup that typically takes between one and two hours. These air springs are manufactured in the USA and are rated for a load-carrying capacity of up to 1,000 lbs.

• Part Number: 4148
• Load Capacity: Up to 1,000 lbs.
• Pressure Range: 5 PSI minimum (unloaded) to 60 PSI maximum (loaded)
• Installation: No-drill, 1-2 hour estimated install time
• Configuration: Manual fill (compressor sold separately)
• Construction: Durable polyurethane air springs
• Origin: Assembled in the USA

Fits 2019-2026 Ram 1500 and 1500 Classic models, including Big Horn, Laramie, Limited, Rebel, and TRX (see fitment table for full submodel coverage).

The Firestone Coil-Rite air helper spring kit is designed to provide additional support for vehicles with rear coil spring suspensions. By installing these durable polyurethane air springs inside your existing coil springs, you can adjust the air pressure to compensate for heavy loads, ensuring your Ram 1500 remains level and stable. This system effectively eliminates bottoming out, reduces suspension fatigue, and improves overall ride quality and braking effectiveness when towing or hauling.

This kit features individual inflation valves, allowing for precise side-to-side or front-to-rear adjustment to balance off-center loads. Most applications are no-drill, utilizing factory mounting points for a straightforward installation that typically takes 1 to 2 hours with basic hand tools.

• Part Number: 4130
• Placement: Rear
• Towing Capacity: Up to 5,000 lbs
• Pressure Range: 5 psi minimum / 100 psi maximum
• Adjustability: Manual inflation with compatible analog or wireless control options (sold separately)
• Installation: Typically 1-2 hours; includes all necessary hardware
• Warranty: Two-year limited warranty
• Origin: Assembled in the USA

The Firestone Air-Rite Air Command Compressor Check Valve is an essential component for any air suspension system utilizing an onboard storage tank. This valve serves as a one-way gate, preventing pressurized air from backflowing from the tank into the compressor head once the pump cycles off. By isolating the tank pressure, it ensures the system maintains its set height and protects the compressor’s internal valves from unnecessary backpressure stress.

Built for durability and precise fitment, this check valve features a standard 1/8 in. NPT male-to-female configuration for easy integration into existing air lines. It is a direct solution for systems struggling to maintain tank pressure or those requiring a replacement for a worn OE-style check valve.

• Prevents air backflow to maintain consistent tank pressure
• Protects compressor head components from pressure spikes
• Threads: 1/8 in. NPT (1 male, 1 female fitting)
• Manufacturer Part Number: 3468
• Made in the USA
• 2-Year limited warranty

The Firestone Air-Rite Air Command Self-Leveling Dual Path Kit (2955) provides a fully automated management solution for your vehicle's air helper springs. Designed for a "set it and forget it" experience, this system uses mechanical leveling to maintain a consistent ride height, automatically adjusting air pressure to compensate for varying loads. The dual-path control logic ensures both air springs maintain equal pressure, providing balanced support across the axle.

This kit is centered around an Extreme Duty compressor rated for 150 PSI with a 100% duty cycle, allowing for continuous operation without overheating. The included 2-gallon air tank provides ample volume for quick leveling adjustments and supports the onboard auxiliary air system. With the integrated air chuck and dial gauge, you have the added utility of on-vehicle tire inflation and pneumatic tool support.

• Extreme Duty compressor: 150 PSI rated with 100% duty cycle
• 2-gallon air tank with auxiliary air line and dial gauge inflator chuck
• No-drill mounting plates for efficient installation of the compressor and tank
• Dual-path control maintains synchronized pressure in both springs
• Universal compatibility with Firestone Ride-Rite and RED Label air helper spring kits
• Manufacturer Part Number: 2955

The Firestone Air Command Extreme dual-path onboard air compressor system provides precise, independent control over two air springs, allowing you to level uneven loads and adjust your vehicle's ride height on the fly. This Extreme-duty kit features a 100% duty cycle compressor capable of 150 PSI, designed for frequent use and demanding applications. The updated system includes a non-drill mounting plate for the compressor and ECU, significantly reducing installation time to approximately 1-2 hours.

Users can manage air pressure through the included rechargeable USB-C wireless remote or via the Firestone Airide smartphone app. The dual-path configuration allows for side-to-side or front-to-back leveling, while the system automatically maintains a minimum of 5 PSI to protect the air springs. For added utility, the kit provides onboard auxiliary air to fill tires or other equipment.

• Manufacturer Part Number: 2935
• System Type: Dual Path (independent adjustment of two air springs)
• Max Pressure: 150 PSI
• Duty Cycle: 100%
• Flow Rate: 0.94 CFM at 100 PSI
• Max Current Draw: 23 Amps
• Fill Rate: 0-30 PSI in 7 seconds
• Control Methods: Wireless Remote (USB-C) and Bluetooth App Integration
• Memory Presets: 2 Programmable settings
• Installation: No-drill mounting bracket included; any-orientation compressor mounting

Manage your vehicle's air spring pressure with the Firestone Airide Air Command Heavy Duty Onboard Air System. This dual-path system allows for independent adjustment of your air springs, providing the ability to level uneven loads side-to-side. Controlled via a rechargeable USB-C wireless remote or a dedicated smartphone app, this kit offers live feedback and two memory presets for quick adjustments on the fly.

The system features a Heavy Duty compressor capable of 150 PSI and a 30% duty cycle, ensuring reliable performance when you need it. Installation is streamlined with an included no-drill mounting plate that secures both the compressor and the ECU to the vehicle frame. This hardware-complete kit is designed for a straightforward 1-2 hour installation and maintains a minimum 5 PSI in the springs to prevent bag damage when not under load.

• Dual-path fill for independent air spring control
• 150 PSI max pressure Heavy Duty compressor (0.40 CFM @ 100 PSI)
• Wireless remote with USB-C charging and Bluetooth app connectivity
• No-drill mounting bracket for compressor and ECU included
• 14-second fill rate from 0-30 PSI
• 13 AMP max draw with 30% duty cycle
• Maintains 5 PSI minimum safety pressure
• Manufacturer Part Number: 2934

The Firestone Airide Air Command Heavy Duty Onboard Air System (2923) provides professional-grade control over your vehicle’s air springs. This single-path system allows you to adjust both air springs to the same pressure simultaneously using the included rechargeable USB-C remote or a dedicated smartphone app. The updated design features a no-drill mounting plate for the compressor and ECU, significantly reducing installation time and eliminating the need to modify the vehicle frame.

Built for reliability, the Heavy Duty compressor delivers 0.40 CFM at 100 PSI with a 30% duty cycle, ensuring quick response times for loaded vehicles. The system includes live feedback for real-time monitoring and two memory presets for instant adjustment to your preferred towing or hauling settings.

• Max Pressure: 150 PSI
• Flow Rate: 0.40 CFM @ 100 PSI
• Duty Cycle: 30%
• Current Draw: 13 Amps Max
• Fill Rate: 0 to 30 PSI in 14 seconds
• Single Path: Both air springs are maintained at identical pressures
• Control: Bluetooth app integration and rechargeable USB-C wireless remote
• Safety: Automatically maintains a minimum of 5 PSI in air springs
• Installation: Includes no-drill mounting bracket for compressor and ECU
• Manufacturer Part Number: 2923

The Firestone Air Command Single Path Wireless Air Compressor Kit (2922) provides convenient onboard control of your vehicle's air springs. This system utilizes a single-path fill design, ensuring both air springs are maintained at the exact same pressure for balanced load support. The updated kit features a non-drill mounting plate for the compressor and ECU, significantly simplifying the installation process and allowing the compressor to be mounted in any orientation.

• Wireless Control: Includes a rechargeable USB-C remote and Bluetooth connectivity for smartphone app operation.
• Smart Monitoring: Provides live system feedback and maintains a minimum of 5 PSI to protect air springs when not in use.
• Performance: Delivers a maximum pressure of 100 PSI with a 0.32 CFM flow rate at 100 PSI.
• Memory Presets: Two programmable presets allow for quick adjustments to preferred towing or hauling heights.

Technical Specifications:

• Part Number: 2922
• Maximum Pressure: 100 PSI
• Duty Cycle: 9%
• Maximum Draw: 13 Amps
• Flow Rate: 0.32 CFM @ 100 PSI
• Fill Rate: 0-30 PSI in 17 seconds
• Interface: Single Path Remote and App control

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4WD trucks including King Ranch, Lariat, Limited, Platinum, XL, and XLT models.

The Firestone Ride-Rite All-In-One (AIO) Wireless Kit provides a complete, out-of-the-box solution for hauling and towing. By bundling the legendary Ride-Rite air springs with a wireless air compressor system, this kit allows you to maintain a level ride height, improve steering control, and eliminate rear-end squat. The wireless system features Bluetooth pairing for smartphone app control (iOS and Android compatible), offering live system feedback and two memory presets for precise pressure management without routing gauges into the cab.

Designed for professional-grade performance and ease of installation, this kit utilizes a no-drill mounting plate that bolts to existing factory points. It is compatible with most in-bed hitches and is engineered to provide up to 5,000 lbs of load-leveling capacity.

• Maximum Pressure: 100 PSI
• Minimum Pressure: 5 PSI (maintained automatically)
• Load-Leveling Capacity: 5,000 lbs
• Compressor Performance: 0.32 CFM @ 100 PSI
• Duty Cycle: 9%
• Max Amp Draw: 13 Amps
• Fill Rate: 0-30 PSI in 17 seconds
• Control: App-based wireless control with memory presets
• Installation: No-drill system; estimated 1-2 hour install time
• Manufacturer Part Number: 2890

Fits 2017-2026 Ford F-250 and F-350 Super Duty 4WD trucks. The Firestone Ride-Rite All-In-One kit (MPN 2889) is a comprehensive load-leveling solution that combines heavy-duty air helper springs with an onboard analog air compressor system. Designed to eliminate rear-end squat and restore factory ride height while hauling or towing, this kit provides up to 5,000 lbs. of load-carrying capacity. The included single-path analog compressor and backlit in-cab gauge allow you to monitor and adjust your suspension pressure on the fly for better handling and braking.

Engineering for a straightforward install, the kit features a no-drill mounting plate that utilizes existing factory holes to minimize modifications. The air springs are also compatible with most in-bed hitches, making this a versatile choice for fifth-wheel and gooseneck towing setups.

• Load-leveling capacity: Up to 5,000 lbs.
• Maximum air pressure: 100 PSI (5 PSI minimum)
• Compressor: Standard duty with 9% duty cycle and 13A max draw
• Fill rate: 0-30 PSI in 17 seconds
• Flow rate: 0.32 CFM at 100 PSI
• In-cab analog backlit gauge with black plastic housing
• No-drill installation on most applications
• Manufacturer Part Number: 2889

Fits 2013-2025 Ram 3500 4WD models including Big Horn, Laramie, Limited, SLT, and Tradesman.

The Firestone Ride-Rite All-In-One Kit (2886) provides a complete solution to eliminate vehicle squat and sag when hauling heavy loads or towing. This system utilizes durable air springs to return your Ram 3500 to its factory ride height, improving steering control and braking effectiveness. The included wireless air compressor system allows you to adjust air pressure on the fly using a Bluetooth connection to your smartphone.

Built for reliability and ease of use, the system features app-based control with live feedback and two memory presets for your most frequent load configurations. The standard-duty compressor and air springs mount via a no-drill plate that utilizes existing factory holes for a clean, efficient installation.

• Load-leveling capacity: Up to 5,000 lbs (Do not exceed GVWR)
• Pressure range: 5 PSI minimum to 100 PSI maximum
• Wireless control: Bluetooth pairing for Android and iOS devices
• Compressor performance: 0.32 CFM at 100 PSI; 17-second fill rate (0-30 PSI)
• Electrical specs: 13 Amp max draw; 9% duty cycle
• Installation: No-drill mounting plate and hardware included
• Maintenance: Automatically maintains minimum 5 PSI when not in use
• Manufacturer Part Number: 2886

Fits 2001-2010 Chevrolet Silverado and GMC Sierra 2500, 2500 HD, 3500, and 3500 HD models.

The Firestone Ride-Rite All-In-One Kit (MPN: 2869) provides a comprehensive solution for leveling heavy loads and maintaining control while towing. This system replaces the sagging feel of a loaded truck with a firm, stable ride by utilizing high-strength air helper springs. By adjusting air pressure, you can eliminate rear-end squat, improve steering geometry, and maintain proper headlight aim. This specific kit includes a single-path analog compressor system, allowing you to monitor and adjust your suspension from the driver's seat using a backlit in-cab gauge.

• Load Leveling Capacity: Up to 5,000 lbs (Do not exceed GVWR)
• Onboard Air: Standard duty compressor with a no-drill mounting plate
• Pressure Range: 5 PSI minimum to 100 PSI maximum
• Compressor Specs: 9% Duty Cycle, 13 Amp max draw, 0.32 CFM at 100 PSI
• Inflation Performance: 0-30 PSI in approximately 17 seconds
• Installation: Bolt-on, no-drill design for most applications; compatible with in-bed hitches
• In-Cab Control: Analog backlit gauge with black plastic housing for easy pressure monitoring

The kit comes complete with Firestone Ride-Rite air springs, an air compressor, an analog control gauge, a mounting bracket, air lines, and all necessary hardware for a clean installation typically completed in 1-2 hours.

Fits 2017-2026 Ford F-250 and F-350 Super Duty 4WD models.

Firestone Ride-Rite RED Label air spring kits are engineered for heavy-duty applications, providing up to 7,500 lbs of load-leveling capacity. These kits utilize commercial-grade rubber bellows and high-strength hardware to stabilize heavy loads, reduce rear-end sag, and minimize bottoming out. Designed specifically for 4WD Super Duty trucks, this kit is compatible with in-bed hitches and maintains a more level vehicle stance for better steering control and braking effectiveness while towing.

• Load-Leveling Capacity: Up to 7,500 lbs
• Pressure Range: 5 PSI minimum; 100 PSI maximum working pressure
• Maximum Air Pressure: 150 PSI
• Installation: No-drill system utilizes existing factory holes; estimated 90-120 minute install
• Materials: Commercial-grade rubber and heavy-duty components
• Compatibility: Compatible with most in-bed hitches
• Adjustment: Manual fill system for precise side-to-side and front-to-back leveling
• Manufacturer Part Number: 2716

Fits select 2012-2025 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD.

The Firestone Ride-Rite RED Label series is engineered for the most demanding towing and hauling applications. These heavy-duty air helper springs provide up to 7,500 lbs of load-leveling capacity, allowing you to maintain a level vehicle stance even when carrying off-center or maximum-rated loads. By utilizing adjustable air pressure, this system improves ride quality, reduces inter-leaf friction, and increases braking effectiveness and steering control.

Constructed with commercial-grade rubber and high-strength components, the RED Label kit is designed to withstand high-pressure environments up to 150 PSI. The system features individual inflation valves for precise side-to-side or front-to-rear adjustment. Most applications utilize a no-drill design, mounting directly to factory frame holes for a straightforward installation that typically takes about 90 to 120 minutes.

• Manufacturer Part Number: 2715
• Load-Leveling Capacity: Up to 7,500 lbs
• Operating Pressure: 5 PSI minimum to 150 PSI maximum
• Commercial-grade rubber construction for extreme durability
• No-drill installation on most models using factory mounting points
• Manual fill system (Compressor and gauges sold separately)
• Compatible with most in-bed hitches
• Includes all necessary brackets, air springs, hardware, and airline

Fits Chevrolet 4500/5500 Cab & Chassis models. Designed for extreme-duty applications, the Firestone Ride-Rite RED Label air spring kit provides essential support for heavy hauling and towing by offering up to 7,500 lbs of load-leveling capacity. This rear-mounted system helps eliminate sag, reduces bottoming out, and improves overall vehicle stability and steering control under load.

Constructed with commercial-grade rubber and high-strength components, these air springs are rated for up to 150 PSI of maximum air pressure. Most applications feature a no-drill installation that utilizes existing factory mounting holes, allowing for a straightforward setup in approximately 1-2 hours using basic hand tools.

• Series: Ride-Rite RED Label
• Position: Rear
• Load-Leveling Capacity: Up to 7,500 lbs
• Maximum Air Pressure: 150 PSI
• Material: Commercial-grade rubber and heavy-duty hardware
• Installation: Bolt-on (utilizes existing factory holes)
• Manufacturer Part Number: 2711

Fits select 2013-2025 Ram 3500 trucks (see fitment table for specific trim compatibility).

The Firestone Ride-Rite RED Label air spring kit is engineered for the most demanding towing and hauling applications. These heavy-duty air springs are constructed from commercial-grade rubber and high-strength components to handle loads that exceed standard air spring ratings. By providing up to 7,500 lbs of load-leveling capacity, this kit eliminates rear-end sag, improves steering control, and keeps your headlights leveled for safer nighttime driving.

This rear-mounted system is designed to handle up to 150 PSI, allowing for maximum stability under heavy commercial or recreational loads. The no-drill design utilizes your vehicle's existing factory holes for a straightforward installation that can be completed in 1-2 hours with basic hand tools.

• Manufacturer Part Number: 2710
• Load-leveling capacity: Up to 7,500 lbs
• Maximum air pressure: 150 PSI
• Construction: Commercial-grade reinforced rubber springs
• Installation: No-drill kit utilizing factory mounting points
• Components included: Air springs, vehicle-specific brackets, air lines, manual inflation valves, and all necessary hardware

Fits 2011-2026 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD.

The Firestone Ride-Rite RED Label air spring kit is engineered for the most demanding towing and hauling applications. Built for 3/4-ton and 1-ton trucks, these heavy-duty air springs provide up to 7,500 lbs of load-leveling capacity to eliminate rear-end sag, improve steering control, and increase braking effectiveness while under load. Using commercial-grade rubber and high-strength components, the RED Label series is designed to withstand higher pressures and harsher environments than standard air helper springs.

This kit is designed for a straightforward installation, typically taking 1-2 hours. Most applications utilize a no-drill system that bolts directly to existing factory mounting points on the frame. With a maximum pressure rating of 150 PSI, these springs offer the adjustability needed to keep your truck level whether you are hauling a heavy fifth-wheel or a full payload in the bed.

• Part Number: 2709
• Series: Ride-Rite RED Label
• Load-Leveling Capacity: Up to 7,500 lbs
• Maximum Air Pressure: 150 PSI
• Material: Commercial-grade rubber bellows
• Mounting: Rear axle
• Installation: No-drill system (utilizes existing factory holes)
• Compatible with 2WD and 4WD models

Fits select 2014-2025 Ram 2500 and 2016 Ram 3500 models.

Maximize your heavy-duty towing and hauling capabilities with the Firestone Ride-Rite RED Label Extreme Duty air spring kit. Engineered for commercial-grade durability, this rear suspension upgrade provides up to 7,500 lbs of load-leveling capacity. By maintaining a level vehicle height under load, these air springs improve steering control, optimize braking effectiveness, and reduce tire wear.

Constructed with commercial-grade rubber and high-strength components, the RED Label series is built to handle the most demanding environments, supporting up to 150 PSI of internal pressure. Most kits are designed for a no-drill installation, utilizing existing factory mounting points for a straightforward setup in 1-2 hours.

• Up to 7,500 lbs of load-leveling capacity
• Supports up to 150 PSI maximum air pressure
• Built with commercial-grade rubber and high-strength hardware
• No-drill installation utilizing existing factory holes for most applications
• Improves ride quality and vehicle stability by leveling off-center loads
• Includes air springs, brackets, air lines, manual inflation valves, and hardware
• Manufacturer Part Number: 2706

Fits select 2008-2016 Ford F-250 and F-350 Super Duty models.

The Firestone Ride-Rite RED Label Extreme Duty Air Spring Kit is engineered to handle the heaviest loads and most demanding towing conditions. Utilizing commercial-grade rubber and high-strength components, this rear air spring system provides up to 7,500 lbs of load-leveling capacity to eliminate sag, improve steering control, and increase braking effectiveness when fully loaded.

Designed for professional-grade performance, RED Label kits are capable of handling up to 150 PSI, allowing for precise adjustment of your vehicle's ride height. Most applications feature a no-drill installation that utilizes existing factory mounting holes for a straightforward setup that typically takes 1-2 hours.

• Manufacturer Part Number: 2703
• Load-Leveling Capacity: Up to 7,500 lbs
• Maximum Pressure: 150 PSI
• Construction: Commercial-grade rubber and heavy-duty hardware
• Installation: Bolt-on design utilizing factory holes (approx. 1-2 hours)

Fits select 2003-2013 Dodge and Ram 2500 and 3500 pickup trucks (2WD/4WD).

The Firestone Ride-Rite RED Label Extreme Duty air spring kit is engineered for the most demanding towing and hauling tasks. Built with commercial-grade reinforced rubber, this kit provides up to 7,500 lbs of load-leveling capacity. By supporting the vehicle's rear suspension, these air springs eliminate sag, reduce bottoming out, and improve steering control and braking effectiveness when carrying heavy payloads or towing trailers.

This extreme-duty system is designed to handle up to 150 PSI, offering superior durability compared to standard kits. Most applications utilize a no-drill design that bolts onto the factory mounting points using existing holes, allowing for a straightforward installation that typically takes between 1-2 hours.

• Manufacturer Part Number: 2701
• Load-Leveling Capacity: Up to 7,500 lbs
• Maximum Air Pressure: 150 PSI
• Material: Commercial-grade reinforced rubber
• Installation: Typical 1-2 hour bolt-on installation
• System Type: RED Label Extreme Duty
• Placement: Rear Axle

Fits select 2017-2026 Ford F-250 and F-350 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT).

The Firestone Ride-Rite 2625 Air Spring Kit is a heavy-duty solution designed to maximize your Super Duty's safe load-carrying capacity and stability. These air helper springs provide up to 5,000 lbs of load support through adjustable air pressure, effectively eliminating rear-end sag, reducing bottoming out, and improving steering control while towing or hauling. By reducing inter-leaf friction, the Ride-Rite system also enhances overall ride quality under varying load conditions.

This kit features individual inflation valves, allowing for separate side-to-side adjustment to keep your vehicle level even with off-center loads. Engineered as a no-drill system, it utilizes the factory mounting holes between the frame and suspension for a streamlined installation that typically takes about 90 minutes. The 2625 kit is also designed for maximum versatility, remaining compatible with most in-bed hitches.

• Load-carrying capacity: 5,000 lbs
• Adjustable air pressure: 5 PSI minimum to 100 PSI maximum
• No-drill installation using factory mounting points
• Compatible with most in-bed hitches
• Manual fill system with individual inflation valves
• Protects and stabilizes heavy loads for improved braking effectiveness
• Complete kit includes all hardware for installation
• Manufacturer Part Number: 2625

Fits 2008-2021 Ford E-450 Commercial Chassis, including Chassis Cab, Cutaway, and Transit Van models. The Firestone Ride-Rite Air Helper Spring Kit is engineered to maximize the load-carrying capacity and stability of your vehicle by utilizing adjustable air pressure to level heavy or off-center loads. These air springs mount between the frame and the suspension, effectively reducing bottoming out, improving brake effectiveness, and smoothing the ride by minimizing inter-leaf friction.

This system features individual manual inflation valves, allowing for precise side-to-side or front-to-rear adjustment to maintain a level ride height regardless of cargo distribution. For most Chassis Cab and Cutaway applications, this is a no-drill system that uses existing factory holes for a straightforward installation that typically takes one to two hours.

• Rated up to 5,000 lbs. of load-carrying capacity
• Pressure range: 5 psi minimum to 100 psi maximum
• Manual fill system (compressor sold separately)
• No-drill installation for Chassis Cab and Cutaway models
• Drill installation required for Transit Van models
• Typical installation time: 1-2 hours
• Assembled in the USA
• Manufacturer Part Number: 2622

Fits 2013-2025 Ram 3500 models (Big Horn, Laramie, Limited, Lone Star, SLT, Special Service, ST, and Tradesman).

The Firestone Ride-Rite 2615 air helper spring kit is engineered to maximize your Ram 3500's load-carrying capacity and stability. These air springs provide essential load support by utilizing adjustable air pressure to level the vehicle, which improves ride quality, maintains proper headlight aim, and increases braking effectiveness. The system features individual inflation valves, allowing for precise side-to-side adjustment to compensate for off-center loads.

• Rated for up to 5,000 lbs of load-carrying capacity
• No-drill installation: uses existing factory holes in the frame for mounting brackets
• Adjustable air pressure from 5 psi minimum (unloaded) to 100 psi maximum (loaded)
• Reduces suspension fatigue and prevents bottoming out under heavy loads
• Compatible with most in-bed hitches
• Manual fill system (compressor not included)
• Assembled in the USA

Each kit includes two air springs, upper and lower mounting brackets, air lines, inflation valves, and all necessary hardware for an installation that typically takes 1 to 2 hours. Note: Lifted applications may require additional lift spacers (sold separately).

Fits select 2011-2026 Chevrolet Silverado 2500 HD and 3500 HD, and GMC Sierra 2500 HD and 3500 HD trucks.

Maximize your vehicle's safe load-carrying capacity and stability with the Firestone Ride-Rite Rear Air Helper Spring Kit. These adjustable air springs are engineered to sit between the truck's frame and the suspension, providing critical support through air pressure that can be adjusted to match varying loads. By reducing inter-leaf friction and preventing bottoming out, this system significantly improves ride quality, braking effectiveness, and handling.

The 2613 kit features individual inflation valves, allowing for precise side-to-side or front-to-rear leveling to compensate for off-center loads. Most applications utilize a no-drill design that bolts directly into factory mounting holes for a straightforward installation that typically takes between one and two hours.

• Part Number: 2613
• Maintains vehicle level and proper headlight aim under heavy loads
• Reduces suspension fatigue and eliminates bottoming out
• Adjustable air pressure for fine-tuning based on cargo or trailer weight
• Individual inflation valves for lateral leveling
• Typical installation time: 1-2 hours
• Includes all necessary mounting brackets, bellows, and air lines
• Two-year limited manufacturer warranty