ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.

• 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
• One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
• Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
• 6061 aluminum rod end, top cap, and internals ensure strength and durability
• 5/8” chrome plated hardened steel shaft resists corrosion and pits
• Nitrogen charged monotube design with remote reservoir
• Nitrile rubber top out bumper for noise free operation
• Application-specific reservoir mounting hardware
• 100% revalveable
• 100% rebuildable

This Part Fits:

The ICON Alloys Vector 5 wheel incorporates sharp lines and an aggressive spoke design while a featureless lip provides clean looks and makes care & maintenance an easier task (doesn't trap debris as easily). Combining these bold looks with ICON optimized dimensions, the Vector 6 is designed to improve the form and function of your truck or SUV. Backspace and wheel offset dimensions have been strategically developed to reduce scrub radius, enhancing handling characteristics and ride quality - this is truly a "wheel designed with suspension in mind".

• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Reduced unsprung weight and rotating mass improves on and off-road vehicle performance
• Application-specific dimensions optimize vehicle dynamics and tire clearance

This Part Fits:

The ICON Alloys Vector 5 wheel incorporates sharp lines and an aggressive spoke design while a featureless lip provides clean looks and makes care & maintenance an easier task (doesn't trap debris as easily). Combining these bold looks with ICON optimized dimensions, the Vector 6 is designed to improve the form and function of your truck or SUV. Backspace and wheel offset dimensions have been strategically developed to reduce scrub radius, enhancing handling characteristics and ride quality - this is truly a "wheel designed with suspension in mind".

• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Reduced unsprung weight and rotating mass improves on and off-road vehicle performance
• Application-specific dimensions optimize vehicle dynamics and tire clearance

This Part Fits:

The ICON Alloys Vector 5 wheel incorporates sharp lines and an aggressive spoke design while a featureless lip provides clean looks and makes care & maintenance an easier task (doesn't trap debris as easily). Combining these bold looks with ICON optimized dimensions, the Vector 6 is designed to improve the form and function of your truck or SUV. Backspace and wheel offset dimensions have been strategically developed to reduce scrub radius, enhancing handling characteristics and ride quality - this is truly a "wheel designed with suspension in mind".

• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Reduced unsprung weight and rotating mass improves on and off-road vehicle performance
• Application-specific dimensions optimize vehicle dynamics and tire clearance

This Part Fits:

These 7/8" diameter shock shafts are a direct replacement for all ICON Vehicle Dynamics 2.5 Series coilovers and shock absorbers along with all 2.0 Series coilovers. CNC machined in house to exact tolerances and induction hardened and chrome plated for maximum durability and corrosion resistance.

• Induction hardened and chrome plated for maximum durability and corrosion resistance
• 7/8" diameter for use with ICON 2.5 Series shock absorbers
• CNC machined to precise tolerances

These 7/8" diameter shock shafts are a direct replacement for all ICON Vehicle Dynamics 2.5 Series coilovers and shock absorbers along with all 2.0 Series coilovers. CNC machined in house to exact tolerances and induction hardened and chrome plated for maximum durability and corrosion resistance.

• Induction hardened and chrome plated for maximum durability and corrosion resistance
• 7/8" diameter for use with ICON 2.5 Series shock absorbers
• CNC machined to precise tolerances

This nitrogen fill tool is needed to check or refill the nitrogen charge when servicing ICON 2.0 and 2.5 smooth body shocks, as well as 2.5 non-reservoir coil over shocks. On these shocks we use an in house CNC machined charge port which has a low profile design for clearance. The ICON nitrogen fill tool is required to puncture a rubber plug in the charge port, allowing nitrogen into the shock through the hypodermic needle.

Bring a bold new look to your ride with the all-new ICON Alloys VECTOR 6! Combining sharp lines, a concave spoke design, and "ICON-optimized" dimensions, these wheels will increase both the form and function of your Jeep, truck, or SUV. Staying true to the ICON Alloys approach, the VECTOR 6 has been engineered to maximize caliper clearance and optimize wheel position for un-hindered suspension travel and steering function. Backspace dimensions and wheel offset have been strategically developed to reduce scrub radius, improving all-around handling and ride quality and making a set of these wheels the perfect complement to an ICON Vehicle Dynamics suspension system.

• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Reduced unsprung weight and rotating mass improves on and off-road vehicle performance
• Application-specific dimensions optimize vehicle dynamics and tire clearance

This Part Fits:

Bring a bold new look to your ride with the all-new ICON Alloys VECTOR 6! Combining sharp lines, a concave spoke design, and "ICON-optimized" dimensions, these wheels will increase both the form and function of your Jeep, truck, or SUV. Staying true to the ICON Alloys approach, the VECTOR 6 has been engineered to maximize caliper clearance and optimize wheel position for un-hindered suspension travel and steering function. Backspace dimensions and wheel offset have been strategically developed to reduce scrub radius, improving all-around handling and ride quality and making a set of these wheels the perfect complement to an ICON Vehicle Dynamics suspension system.

• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Reduced unsprung weight and rotating mass improves on and off-road vehicle performance
• Application-specific dimensions optimize vehicle dynamics and tire clearance

This Part Fits:

Bring a bold new look to your ride with the all-new ICON Alloys VECTOR 6! Combining sharp lines, a concave spoke design, and "ICON-optimized" dimensions, these wheels will increase both the form and function of your Jeep, truck, or SUV. Staying true to the ICON Alloys approach, the VECTOR 6 has been engineered to maximize caliper clearance and optimize wheel position for un-hindered suspension travel and steering function. Backspace dimensions and wheel offset have been strategically developed to reduce scrub radius, improving all-around handling and ride quality and making a set of these wheels the perfect complement to an ICON Vehicle Dynamics suspension system.

• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Reduced unsprung weight and rotating mass improves on and off-road vehicle performance
• Application-specific dimensions optimize vehicle dynamics and tire clearance

This Part Fits:

Bring a bold new look to your ride with the all-new ICON Alloys VECTOR 6! Combining sharp lines, a concave spoke design, and "ICON-optimized" dimensions, these wheels will increase both the form and function of your Jeep, truck, or SUV. Staying true to the ICON Alloys approach, the VECTOR 6 has been engineered to maximize caliper clearance and optimize wheel position for un-hindered suspension travel and steering function. Backspace dimensions and wheel offset have been strategically developed to reduce scrub radius, improving all-around handling and ride quality and making a set of these wheels the perfect complement to an ICON Vehicle Dynamics suspension system.

• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Reduced unsprung weight and rotating mass improves on and off-road vehicle performance
• Application-specific dimensions optimize vehicle dynamics and tire clearance

This Part Fits:

Staying true to the ICON Alloys approach, the Recon PRO has been engineered to maximize caliper clearance and optimize wheel position for un-hindered suspension travel and steering function. Backspace and wheel offset dimensions have been strategically developed to reduce scrub radius, improving all-around handling and ride quality. The Recon PRO has also been strength tested to yield a 3,200lb load rating - making it one of the strongest wheel options on the market. With build features such as these, it's clear that a set of ICON Alloys wheels is the perfect complement to any truck, Jeep, or SUV.

• Hardened bead retention pins utilize a SAE J1926 O-ring seal and are constructed from high strength alloy that is thermochemically treated for extreme corrosion resistance
• Patented InnerLock technology (U.S. Patent No. 11,090,976) provides the ultimate blend of on-road safety and off-road performance, ideal for the “weekend warrior”
• Reduced unsprung weight and rotating mass (compared to a traditional bead lock) improves handling characteristics and vehicle dynamics
• High-grade aluminum, removable, and replaceable HALO Wheel Armor protects wheel from trail damage
• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Bead retention system features alloy pins that are removable, reusable, and replaceable
• Compatible with a wide variety of tires without the need for any shims or special tools
• Application-specific dimensions optimize vehicle dynamics and tire clearance
• Strategically placed hardware for maximum protection from trail damage
• Quick, easy, and safe tire installation and removal
• Super strong 3200 lbs load rating
• Engineered for DOT compliance

This Part Fits:

These billet aluminum sway bar links for your 2020-Up Jeep Gladiator JT prevent sway bar bind as the suspension approaches full droop when used with ICON rear shocks and springs while on vehicle adjustment allows for further fine tuning of the sway bar angle. High quality FK rod end bearings also eliminate bushing deflection common with stock bushings for confidence inspiring handling characteristics and allow for maximum articulation without binding.

• High quality FK rod ends eliminate bushing deflection for improved handeling
• High quality FK rod ends eliminate bushing deflection for improved handling
• Adjustable while installed on vehicle to fine tune sway bar angle
• Billet aluminum sway bar links with laser etched ICON logos

This Part Fits:

The ICON Tubular Rear Track Bar helps center the axle of your lifted 2020-2023 Jeep Gladiator or 2019-2023 Ram 1500 to allow for increased suspension travel and articulation. A massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. ICON’s exclusive rod end Double Adjuster Sleeve allows for fast, easy “on-vehicle” adjustment of track bar length without requiring removal or disassembly of the track bar. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. The track bar is made of CNC bent 1¼ x .250 wall 1026 DOM tubing with CNC machined threaded end and bushing housing. It has a multi-stage black powder coat finish. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.

• Maintenance free, multi-durometer bushing and JM12T rod end minimize deflection while maximizing responsiveness
• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing
• On vehicle adjustable for precise track alignment using ICON’s Double Adjuster
• Dual stage powder coat finish provides excellent corrosion resistance
• Easy install into OEM mounts w/ application specific hardware
• Allows for full suspension articulation without binding

This Part Fits:

The ICON Jeep Gladiator rear coil springs provide 1.5" of lift height and feature a triple rate design with unique ICON-engineered droop, ride, and overload rates. This triple rate design allows for a soft rate at ride height for superb on-road comfort and a firmer overload rate that increases during compression for excellent bottoming resistance and off-road performance. Additionally, an even softer droop rate is engaged when the suspension approaches full extension for improved off-road ride quality. Like all ICON coil springs they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2020-UP Jeep JT Gladiator.

• ICON 1K tested under rigorous off-road conditions to validate performance, strength, and durability
• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
• 23% increase in rear wheel travel when paired with ICON shocks
• Dual stage powder coating for corrosion resistance
• Lifetime guarantee against sagging/breakage
• 1.5" rear lift height over stock

This Part Fits:

The 2020-UP Jeep Gladiator (JT) 1.38" Rear Coil Spacer Kit provides a easy and inexpensive solution to lift the rear of your Jeep Gladiator and achieve a level stance with 2.5" of lift height added to the front of the vehicle. These high quality billet aluminum spacers have been black anodized for corrosion resistance and matching looks with other ICON Vehicle Dynamics suspension components.

• Billet aluminum rear 1.375" coil spacers eliminate the factory rake when used with 2" front lift
• Black anodized finish for improved corrosion resistance
• Compatible with OE or aftermarket rear coil springs
• Compatible with OE rear coil springs

This Part Fits:

This billet aluminum sway bar relocation kit for the 2020-Up Jeep Gladiator JT drops the rear sway bar to prevent bind and ensure full suspension travel when used with ICON rear shocks,

• Black anodized for corrosion resistance
• Billet aluminum construction
• Includes mounting hadware

This Part Fits:

These billet aluminum front sway bar links for your 2018-Up Jeep Wrangler JL and 2020-Up Jeep Gladiator JT correct the sway bar angle for use with 2.5" of lift while on vehicle adjustment allows for further fine tuning of the sway bar angle. High quality FK rod end bearings also eliminate bushing deflection common with stock bushings for confidence inspiring handling characteristics and allow for maximum articulation without binding.

• High quality FK rod ends eliminate bushing deflection for improved handling
• Adjustable while installed on vehicle to fine tune sway bar angle
• Billet aluminum sway bar links with laser etched ICON logos

This Part Fits:

Upgrading your Jeep Wrangler's rear track bar is a great solution ensure that the Jeep’s axle is properly centered under the vehicle in addition to providing other useful benefits. ICON’s Double Adjuster allows for on vehicle adjustment to streamline the rear-end alignment after installation. A maintenance free, multi-durometer bushing paired with a 3/4” rod end bearing virtually eliminate the deflection that is common in the stock track bar bushings for improved vehicle handling. Overall articulation is also improved by allowing the suspension to cycle fully without binding.

• Maintenance free, multi-durometer bushing and JM12T rod end minimize deflection while maximizing responsiveness
• “ICON 1K” tested under rigorous off-road conditions to validate performance, strength, and durability
• Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing
• On vehicle adjustable for precise track alignment using ICON’s Double Adjuster
• Dual stage powder coat finish provides excellent corrosion resistance
• Easy install into OEM mounts w/ application specific hardware
• Allows for full suspension articulation without binding

This Part Fits:

Upgrading your Jeep Wrangler JL or Gladiator front track bar is great solution ensure that the Jeep’s axle is properly centered under the vehicle in addition to providing other useful benefits. ICON’s Double Adjuster allows for on vehicle adjustment to streamline the front-end alignment after installation. A maintenance free, multi-durometer bushing paired with a 3/4” rod end bearing virtually eliminate the deflection that is common in the stock track bar bushings. This added rigidity improves vehicle handling and helps prevent possible front-end wobble issues from more compliant bushing materials. These joints also improve the overall articulation by allowing the suspension to cycle fully without binding.

• Maintenance free, multi-durometer bushing and JM12T rod end minimize deflection while maximizing responsiveness
• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing
• On vehicle adjustable for precise track alignment using ICON’s Double Adjuster
• Dual stage powder coat finish provides excellent corrosion resistance
• Easy install into OEM mounts w/ application specific hardware
• Allows for full suspension articulation without binding

This Part Fits:

The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep Wrangler JL coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon JL) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler.

• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Dual rate coil springs with lifetime guarantee against sagging/breakage
• Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
• 2" rear increase in wheel travel (when paired with ICON shocks)
• Improves on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Includes swaybar links and bump stop spacers
• 2.5" lift height

This Part Fits:

The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.

• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Dual rate coil springs with lifetime guarantee against sagging/breakage
• Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
• 3" front increase in wheel travel (when paired with ICON shocks)
• 2.5" front lift height on Wrangler/2" front lift on Gladiator
• Improves on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install

This Part Fits:

ICON’s tubular steel front lower link arms for the Jeep Wrangler JL and Gladiator are a significant upgrade over the factory units due to increases in strength and performance as well as improved alignment specs. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This front lower link arm kit features multi durometer bushings that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The increased range of motion provided by these bushings allows the suspension function as intended, without the bushing bind that limits the vehicle in stock form.

• Multi durometer bushing for noise free operation and maximum angularity
• Fabricated components covered under ICON's lifetime warranty
• Dual stage powder coat for excelled corrosion resistance
• CNC machined & notched 1026 DOM steel construction
• ICON1K tested in extreme off-road conditions
• No grease required for life of bushings
• Integrated brake line bracket mount

This Part Fits:

The ICON Vehicle Dynamics 2007-2018 Jeep Wrangler JK 3" lift coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep JK coil springs provide 3" of front lift height over stock and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2007-2018 Jeep Wrangler JK.

• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Dual rate coil springs improve on and off-road ride quality over stock
• Fits 33" tires (35" with optional aftermarket high clearance fenders)
• Increase in wheel travel when paired with ICON shocks
• 100% bolt-on system makes for an easy install
• Lifetime guarantee against sagging/breakage
• 3" lift height over stock

This Part Fits:

Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.

• Quick, precise, on-vehicle adjustment for both caster and camber using ICON's Double Adjuster System
• Patented Delta Joint PRO (U.S. Pat. 10,731,700) allows maximum articulation without binding
• Corrects suspension geometry and allows for proper wheel alignment on lifted vehicles
• FK Rod Ends at chassis pivots for strength and precision driving characteristics
• CNC machined 6061 billet aluminum construction with satin anodized finish
• Delta Joint PRO is 100% serviceable and rebuildable
• Built in O-ring sealed dust cover cap

This Part Fits:

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

• Quality PTFE-lined ¾” FK Rod Ends at chassis pivots for strength and precision driving characteristics
• Corrects suspension geometry and imptrecves handling on lifted or stock height trucks
• CNC machined 6061 billet aluminum construction with satin anodized finish
• Patented ICON Delta Joint allows maximum articulation without binding
• Quick, precise, on-vehicle adjustment for both caster and camber
• Built in O-ring sealed Delta Joint dust cover cap

This Part Fits:

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

• CNC Machined Bushing Housings and Sleeves
• Black Semi-Gloss Powder Coat Finish
• Serviceable Dual Stage Bushings
• 1026 DOM Steel Construction
• Built-In Caster Correction
• ICON Delta Joint
• CNC Bent Tubing

This Part Fits:

Staying true to the ICON Alloys approach, the Rebound PRO has been engineered to maximize caliper clearance and optimize wheel position for un-hindered suspension travel and steering function. Backspace and wheel offset dimensions have been strategically developed to reduce scrub radius, improving all-around handling and ride quality. The Rebound PRO has also been strength tested to yield a 3,200lb load rating - making it one of the strongest wheel options on the market. With build features such as these, it's clear that a set of ICON Alloys wheels is the perfect complement to any truck, Jeep, or SUV.

• Hardened bead retention pins utilize a SAE J1926 O-ring seal and are constructed from high strength alloy that is thermochemically treated for extreme corrosion resistance
• Patented InnerLock technology (U.S. Patent No. 11,090,976) provides the ultimate blend of on-road safety and off-road performance, ideal for the “weekend warrior”
• Reduced unsprung weight and rotating mass (compared to a traditional bead lock) improves handling characteristics and vehicle dynamics
• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Bead retention system features alloy pins that are removable, reusable, and replaceable
• Compatible with a wide variety of tires without the need for any shims or special tools
• Application-specific dimensions optimize vehicle dynamics and tire clearance
• Strategically placed hardware for maximum protection from trail damage
• Quick, easy, and safe tire installation and removal
• Super strong 3200 lbs load rating
• Engineered for DOT compliance

This Part Fits: