Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
673 products
673 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$333.79
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 7 hp and 6 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- 2-piece design easily converts to short ram system
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1017-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 6 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Cold Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2013 | Hyundai | Elantra | GLS |
| 2011-2016 | Hyundai | Elantra | Limited |
| 2014-2016 | Hyundai | Elantra | SE |
| 2016 | Hyundai | Elantra | Value Edition |
$457.91
The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP1355 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP1355 put down an impressive 13 additional horsepower and 16 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you'll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in amazing finishes ? SP1355P (Polished), SP1355WB (Wrinkle Black), and finally SP1355WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 13 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1079-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1121BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2019 | Kia | Stinger | Base |
| 2020 | Kia | Stinger | GT-Line |
| 2018-2019 | Kia | Stinger | Premium |
$457.91
The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP1355 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP1355 put down an impressive 13 additional horsepower and 16 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you'll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in amazing finishes ? SP1355P (Polished), SP1355WB (Wrinkle Black), and finally SP1355WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 13 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1079-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1121BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2019 | Kia | Stinger | Base |
| 2020 | Kia | Stinger | GT-Line |
| 2018-2019 | Kia | Stinger | Premium |
$457.91
The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP1355 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP1355 put down an impressive 13 additional horsepower and 16 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you'll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in amazing finishes ? SP1355P (Polished), SP1355WB (Wrinkle Black), and finally SP1355WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 13 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1079-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1121BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2019 | Kia | Stinger | Base |
| 2020 | Kia | Stinger | GT-Line |
| 2018-2019 | Kia | Stinger | Premium |
$469.68
The SP series of cold air intakes is Injen?s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Installation Instructions- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Massive 4.0in mandrel-bent aluminum tubing for maximum power!
- Dyno Proven gains of up to 18 hp and 20 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Manufactured from 6061-T6 aluminum intake tubing
- Aggressive engine tone while under full throttle
- Replacement air filter part number X-1070-BB
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1076BLK
- Available in three amazing finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
- SP1352WB (Wrinkle Black)
- SP1352WR (Wrinkle Red)
- SP1352P (Polished)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2023 | Kia | Stinger | GT-Line |
$469.68
The SP series of cold air intakes is Injen?s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Installation Instructions- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Massive 4.0in mandrel-bent aluminum tubing for maximum power!
- Dyno Proven gains of up to 18 hp and 20 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Aggressive engine tone while under full throttle
- Manufactured from 6061-T6 aluminum intake tubing
- Replacement air filter part number X-1070-BB
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1076BLK
- Available in three amazing finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
- SP1352WB (Wrinkle Black)
- SP1352WR (Wrinkle Red)
- SP1352P (Polished)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2023 | Kia | Stinger | GT-Line |
$469.68
The SP series of cold air intakes is Injen?s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Installation Instructions- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Massive 4.0in mandrel-bent aluminum tubing for maximum power!
- Dyno Proven gains of up to 18 hp and 20 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Manufactured from 6061-T6 aluminum intake tubing
- Aggressive engine tone while under full throttle
- Replacement air filter part number X-1070-BB
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1076BLK
- Available in three amazing finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
- SP1352WB (Wrinkle Black)
- SP1352WR (Wrinkle Red)
- SP1352P (Polished)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2023 | Kia | Stinger | GT-Line |
$758.58
The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open your Genesis G70 and let those turbos spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
DatasheetInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Stepped from 3.00in to 2.50in to 2.25in 6061-T6 aluminum intake tubing
- Smooth intake piping eliminates restrictions and improves airflow
- Replacement air filter part number X-1020-BB (Two Required)
- Twin Fully serviceable Injen SuperNano-Web dry air filter
- Dyno Proven gains of up to 16 hp and 18 lb-ft. of torque
- Innovative Stepped Design allows for maximum airflow
- Optional Hydroshield part number 1035BLK or 1035RED
- Dual mandrel-bent 6061-T6 aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Available in three amazing finishes:
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
- SP1351WR (Wrinkle Red) and
- SP1351P (Polished Finish)
- SP1351WB (Wrinkle Black)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019 | Genesis | G70 | Advanced |
| 2020-2023 | Genesis | G70 | Base |
| 2019 | Genesis | G70 | Design |
| 2019 | Genesis | G70 | Dynamic |
| 2019-2020 | Genesis | G70 | Elite |
| 2022 | Genesis | G70 | Launch Edition |
| 2019-2021 | Genesis | G70 | Prestige |
| 2019,2021 | Genesis | G70 | Sport |
| 2022-2023 | Genesis | G70 | Sport Advanced |
| 2022-2023 | Genesis | G70 | Sport Prestige |
$758.58
Add some easy horsepower to your 18 Kia Stinger with this Injen SP Performance Air Intake! Here at Injen we understand that the Stinger is already a great car but let's all be honest, who doesn't want more power! So, the Injen engineers have designed this CAI to put out 20 HP & 17 Ft. Lbs. of Torque. That's a killer bolt-on power increase with a simple install. In addition to the impressive power increase, our engineering team ensured that safe Air/Fuel ratios are maintained throughout the entire power band. The SP1350 uses silicone couplers and aluminum intake tubes that provide a smooth path for airflow. The SP1350 kit includes two reusable Injen SuperNano-Web Dry Air Filters, allowing for greater airflow and superior filtration. This Injen Stinger Cold Air Intake was designed to fit properly with zero hassle during installation. This intake provides power you can hear! It is a tremendous upgrade for intake sound, it provides a nice throaty tone, especially at full throttle. In addition, for a personalized touch, we offer this kit with the signature Injen Wrinkle Red (SP1350WR) or Wrinkle Black (SP1350WB) air induction tubes. To top it all off, this intake kit includes the Injen Limited Lifetime Warranty.
Installation InstructionsInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in three amazing finishes: SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish)
- Stepped from 3.00in to 2.50in to 2.25in 6061-T6 aluminum intake tubing
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 21 hp and 18 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Features Injen's patented MegaRam (MR) Technology
- Replacement air filter part number X-1078-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1120BLK
- Dual 6061-T6 aluminum intake tubing
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
- 1078-BB Replacement Filter
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2021 | Kia | Stinger | GT |
| 2018-2022 | Kia | Stinger | GT1 |
| 2018-2023 | Kia | Stinger | GT2 |
| 2019 | Kia | Stinger | GTS |
| 2023 | Kia | Stinger | Tribute Edition |
$445.07
You already have the sporty 2019-2020 Hyundai Veloster N and now you're hunting for additional power? If so, Injen has exciting news for you! The SP1343 short ram cold air intake system from Injen Technology will help that L4-2.0L turbo engine found in the Veloster N breathe easier and provide the additional performance that you've been craving. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Additionally, this SP1343 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance cold air intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes – SP1343P for a high luster polished finish or our SP1343BLK for our laser black coated finish. To top it all off, this SP1343 short ram cold air intake system includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 11 hp and 13 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Replacement air filter part number X-1021-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made In Pomona California; USA
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Hyundai | Veloster N | Base |
$445.07
You already have the sporty 2019-2020 Hyundai Veloster N and now you're hunting for additional power? If so, Injen has exciting news for you! The SP1343 short ram cold air intake system from Injen Technology will help that L4-2.0L turbo engine found in the Veloster N breathe easier and provide the additional performance that you've been craving. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Additionally, this SP1343 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance cold air intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes – SP1343P for a high luster polished finish or our SP1343BLK for our laser black coated finish. To top it all off, this SP1343 short ram cold air intake system includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 11 hp and 13 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Replacement air filter part number X-1021-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made In Pomona California; USA
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Hyundai | Veloster N | Base |
$457.91
You already have a sporty Hyundai Veloster, Elantra or Kia Forte GT and now you?re hunting for additional power? If so, Injen has exciting news for you! The SP1342 performance cold air intake from Injen Technology will allow that L4-1.6L turbo engine found in your Veloster to breathe deeper and provide the added performance that you've been craving. , , The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 17 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- 2-piece design easily converts to short ram system
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1014-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 8ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Hyundai | Elantra GT | N Line |
| 2019-2020 | Hyundai | Veloster | Turbo |
| 2019-2020 | Hyundai | Veloster | Turbo R-Spec |
| 2019-2020 | Hyundai | Veloster | Turbo Ultimate |
$457.91
You already have a sporty Hyundai Veloster, Elantra or Kia Forte GT and now you?re hunting for additional power? If so, Injen has exciting news for you! The SP1342 performance cold air intake from Injen Technology will allow that L4-1.6L turbo engine found in your Veloster to breathe deeper and provide the added performance that you've been craving. , , The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 17 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- 2-piece design easily converts to short ram system
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1014-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 8ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Hyundai | Elantra GT | N Line |
| 2019-2020 | Hyundai | Veloster | Turbo |
| 2019-2020 | Hyundai | Veloster | Turbo R-Spec |
| 2019-2020 | Hyundai | Veloster | Turbo Ultimate |
$393.71
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- 2-piece design easily converts to short ram system
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1014-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 12 ft./lbs.
- CARB EO for 2013 model years only
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
- CARB EO #: D-476-8
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2017 | Hyundai | Veloster | Base |
| 2016 | Hyundai | Veloster | Rally Edition |
| 2013-2017 | Hyundai | Veloster | Turbo |
| 2014-2017 | Hyundai | Veloster | Turbo R-Spec |
| 2017 | Hyundai | Veloster | Value Edition |
$349.84
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 8 hp and 6 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- 2-piece design easily converts to short ram system
- Provides power gains while maintaining A/F ratios
- CARB EO applies to 2012-2013 model years only
- Replacement air filter part number X-1010-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 6 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
- CARB EO #: D-476-8
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Hyundai | Accent | GL |
| 2011-2015 | Hyundai | Accent | GLS |
| 2011-2015 | Hyundai | Accent | GS |
| 2011-2014,2016-2017 | Hyundai | Accent | SE |
| 2015-2017 | Hyundai | Accent | Sport |
| 2017 | Hyundai | Accent | Value Edition |
| 2012-2017 | Hyundai | Veloster | Base |
| 2016 | Hyundai | Veloster | Rally Edition |
| 2014-2015 | Hyundai | Veloster | RE:FLEX |
| 2013-2017 | Hyundai | Veloster | Turbo |
| 2014-2017 | Hyundai | Veloster | Turbo R-Spec |
| 2017 | Hyundai | Veloster | Value Edition |
$410.83
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 14 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1034BLK or 1034RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1015-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Increased Torque Up To 16.11 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2019 | Hyundai | Sonata | Limited 2.0T |
| 2015-2018 | Hyundai | Sonata | Sport 2.0T |
| 2016-2020 | Kia | Optima | SX |
| 2016-2017 | Kia | Optima | SX Limited |
$410.83
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 14 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1034BLK or 1034RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1015-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Increased Torque Up To 16.11 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2019 | Hyundai | Sonata | Limited 2.0T |
| 2015-2018 | Hyundai | Sonata | Sport 2.0T |
| 2016-2020 | Kia | Optima | SX |
| 2016-2017 | Kia | Optima | SX Limited |
$339.14
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 14 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2018 | Hyundai | Sonata | Eco |
| 2019-2020 | Kia | Optima | EX |
| 2020 | Kia | Optima | EX Premium |
| 2016-2018 | Kia | Optima | LX 1.6T |
$399.06
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 16 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1021-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 15 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Hyundai | Sonata | Limited |
| 2011-2014 | Hyundai | Sonata | SE |
| 2011-2013 | Kia | Optima | EX |
| 2014-2015 | Kia | Optima | Limited |
| 2011-2013 | Kia | Optima | SX |
| 2014-2015 | Kia | Optima | SX Turbo |
| 2013 | Kia | Optima | SXL |
| 2014-2015 | Kia | Optima | SXL Turbo |
$323.09
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsDatasheet
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 8 hp and 6 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- 2-piece design easily converts to short ram system
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1017-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 6 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2017 | Kia | Forte | EX |
| 2014-2017 | Kia | Forte | LX |
| 2017 | Kia | Forte | S |
$445.07
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 11 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1014-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
- Increased HP up to 11
- CARB EO #: D-476-5
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2000-2005 | Honda | S2000 | Base |
$426.88
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Technical DrawingInstallation Instructions
Installation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 13 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1014-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 13 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2017 | Subaru | Outback | 2.5i |
| 2010-2017 | Subaru | Outback | 2.5i Limited |
| 2010-2017 | Subaru | Outback | 2.5i Premium |
| 2017 | Subaru | Outback | 2.5i Touring |
$460.05
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 12 hp and 9 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- CARB EO # applies to 2013-2014 model years only
- Replacement air filter part number X-1021-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Stainless Steel Band Clamps
- Short Ram Air Intake Design
- CARB EO #: D-476-8
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2016 | Scion | FR-S | Base |
| 2013-2020 | Subaru | BRZ | Limited |
| 2013-2019 | Subaru | BRZ | Premium |
| 2015 | Subaru | BRZ | Series.Blue |
| 2019 | Subaru | BRZ | Series.Gray |
| 2016 | Subaru | BRZ | Series.HyperBlue |
| 2017 | Subaru | BRZ | Series.Yellow |
| 2018,2020 | Subaru | BRZ | TS |
| 2017-2020 | Toyota | 86 | Base |
| 2018-2020 | Toyota | 86 | GT |
| 2020 | Toyota | 86 | Hakone Edition |
| 2017 | Toyota | 86 | Special Edition |
| 2019 | Toyota | 86 | TRD Special Edition |
$460.05
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 12 hp and 9 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Provides power gains while maintaining A/F ratios
- Features Injen's patented MegaRam (MR) Technology
- CARB EO # applies to 2013-2014 model years only
- Features Injen's patented Air Fusion Technology
- Replacement air filter part number X-1021-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Stainless Steel Band Clamps
- Short Ram Air Intake Design
- CARB EO #: D-476-8
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2016 | Scion | FR-S | Base |
| 2013-2020 | Subaru | BRZ | Limited |
| 2013-2019 | Subaru | BRZ | Premium |
| 2015 | Subaru | BRZ | Series.Blue |
| 2019 | Subaru | BRZ | Series.Gray |
| 2016 | Subaru | BRZ | Series.HyperBlue |
| 2017 | Subaru | BRZ | Series.Yellow |
| 2018,2020 | Subaru | BRZ | TS |
| 2017-2020 | Toyota | 86 | Base |
| 2018-2020 | Toyota | 86 | GT |
| 2020 | Toyota | 86 | Hakone Edition |
| 2017 | Toyota | 86 | Special Edition |
| 2019 | Toyota | 86 | TRD Special Edition |
$426.88
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 7 hp and 6 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1013-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 13 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2016 | Subaru | Impreza | Base |
| 2012-2016 | Subaru | Impreza | Limited |
| 2012-2016 | Subaru | Impreza | Premium |
| 2012-2016 | Subaru | Impreza | Sport Limited |
| 2012-2016 | Subaru | Impreza | Sport Premium |
$405.48
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsDatasheet
Installation Instructions
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1017-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Increased Torque Up To 13 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
- CARB EO #: D-476-5
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2007 | Subaru | Impreza | 2.5i |
| 2005-2007 | Subaru | Impreza | Outback Sport |
| 2005 | Subaru | Impreza | RS |
| 2006-2007 | Subaru | Impreza | WRX |
| 2006-2007 | Subaru | Impreza | WRX Limited |
| 2005-2007 | Subaru | Impreza | WRX STI |
| 2007 | Subaru | Impreza | WRX STI Limited |
| 2006-2007 | Subaru | Impreza | WRX TR |
$405.48
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsDatasheet
Installation Instructions
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1017-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Increased Torque Up To 13 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
- CARB EO #: D-476-5
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2007 | Subaru | Impreza | 2.5i |
| 2005-2007 | Subaru | Impreza | Outback Sport |
| 2005 | Subaru | Impreza | RS |
| 2006-2007 | Subaru | Impreza | WRX |
| 2006-2007 | Subaru | Impreza | WRX Limited |
| 2005-2007 | Subaru | Impreza | WRX STI |
| 2007 | Subaru | Impreza | WRX STI Limited |
| 2006-2007 | Subaru | Impreza | WRX TR |
$502.85
The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance Cold Air Intake system to develop some serious bolt-on power. The soul of this Cold Air Intake system is with our smooth, mandrel-bent, over-sized 3.00" O.D. T6-6061 aluminum tube that provides a smooth, uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! This intake system also features our patented MR (Mega Ram) Technology at the MAF for precise control over the fuel trims with no fear of check engine lights or additional electronic tuning.
DatasheetInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Impressive under hood appearance while maintaining an OE fit
- Fully Incorporated Application-Specific Heatshield included
- Optional X-Pedal Throttle Response Controller: P/N PT0002B
- Dyno Proven gains of up to 24 hp and 20 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Innovative Design allows for maximum airflow and power
- Fully serviceable Injen SuperNano-Web dry air filter
- 3.00in Mandrel-bent 6061-T6 aluminum intake tubing
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1078-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Optional Hydroshield part number 1120BLK
- Made in Pomona, California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2021 | Subaru | WRX | Base |
| 2015-2021 | Subaru | WRX | Limited |
| 2015-2021 | Subaru | WRX | Premium |
$369.10
Injen Technology has done it once again with this new short ram air intake for the 2018-2021 Subaru WRX STI Equipped with the H4-2.5L Turbo Engine. The Injen Technology SP1208 performance air intake system is the result of countless hours invested in research and development to provide a proven intake system designed to add power and performance to your STI. The Injen Technology SP1208 intake system is a direct replacement for that restrictive factory airbox and provides a engineered solution that allows that turbo to breathe deeply and produce it's full power potential with a simple drop-in install. To top it all off, no tune is required to get the power numbers noted!
Installation Instructions- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Injen's MR Technology provides massive power gains while maintaining A/F ratios
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 26 hp and 24 lb-ft. of torque
- No additional tuning required and no check engine lights
- Huge 3.250in mandrel-bent 6061-T6 aluminum intake tubing
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen's patented MegaRam (MR) Technology
- Replacement air filter part number X-1059-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional Hydroshield part number 1040BLK
- Available in multiple finishes
- Made in Pomona California, USA
- Short Ram Air Intake Design
- SP1208WB (Wrinkle Black)
- SP1208WR (Wrinkle Red)
- SP1208P (Polished)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2021 | Subaru | WRX STI | Base |
| 2018-2021 | Subaru | WRX STI | Limited |
| 2019 | Subaru | WRX STI | S209 |
| 2018 | Subaru | WRX STI | Type RA |
$405.48
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsTechnical Drawing
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 24 hp and 24 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Features Injen's patented Air Fusion Technology
- Replacement air filter part number X-1059-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 24 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Subaru | WRX STI | Base |
| 2015 | Subaru | WRX STI | Launch Edition |
| 2015-2017 | Subaru | WRX STI | Limited |
| 2016 | Subaru | WRX STI | Series.HyperBlue |
Showing 330/673
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.