Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
673 products
673 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$224.65
Crank up the power output of your Integra LS/RS with the Injen Technology IS1420P Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of the IS1420P intake is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Replacement air filter part number X-1014-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- SuperNano Web Dry Filter X-1014
- Made in Pomona, California USA
- CARB EO #: D-476-3
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1997-2001 | Acura | Integra | GS |
| 1994-2001 | Acura | Integra | LS |
| 1994-1998 | Acura | Integra | RS |
| 1995-1996 | Acura | Integra | Special Edition |
$224.65
Crank up the power output of your Integra LS/RS with the Injen Technology IS1420P Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of the IS1420P intake is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Replacement air filter part number X-1014-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- SuperNano Web Dry Filter X-1014
- Made in Pomona, California USA
- CARB EO #: D-476-3
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1994-2001 | Acura | Integra | LS |
| 1994-1998 | Acura | Integra | RS |
$249.26
Add some easy horsepower to your Acura Integra with this Injen Technology IS Performance short ram air intake! Our engineers spent abundant amounts of time designing, testing, and perfecting the IS400P to produce some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Replacement air filter part number X-1014-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- SuperNano Web Dry Filter X-1014
- Made in Pomona, California USA
- Fits ABS equipped models
- CARB EO #: D-476
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1990-1993 | Acura | Integra | GS |
| 1992-1993 | Acura | Integra | GS-R |
| 1990-1993 | Acura | Integra | LS |
| 1990-1993 | Acura | Integra | RS |
$249.26
Add some easy horsepower to your Acura Integra with this Injen Technology IS Performance short ram air intake! Our engineers spent abundant amounts of time designing, testing, and perfecting the IS400P to produce some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Replacement air filter part number X-1014-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- SuperNano Web Dry Filter X-1014
- Made in Pomona, California USA
- Fits ABS equipped models
- CARB EO #: D-476
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1990-1993 | Acura | Integra | GS |
| 1992-1993 | Acura | Integra | GS-R |
| 1990-1993 | Acura | Integra | LS |
| 1990-1993 | Acura | Integra | RS |
$396.92
The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Additionally, this IS1345 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen IS performance cold air intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this IS1345 short ram cold air intake system includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 19 hp and 19 lb-ft. of torque
- Available with a polished or black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Replacement air filter part number X-1014-BB
- 6061-T6 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made In Pomona California; USA
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019 | Hyundai | Kona | Iron Man Edition |
| 2018-2021 | Hyundai | Kona | Limited |
| 2021 | Hyundai | Kona | Night |
| 2018-2021 | Hyundai | Kona | Ultimate |
$396.92
You already have a sporty Hyundai Veloster, Elantra or Kia Forte GT and now you?re hunting for additional power? If so, Injen has exciting news for you! The IS1342 short ram cold air intake system from Injen Technology will help that L4-1.6L turbo engine found in the Veloster breathe easier and provide the additional performance that you've been craving. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood!, , Additionally, this IS1342 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen IS performance cold air intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this IS1342 short ram cold air intake system includes the unbeatable Injen Technology limited Lifetime Warranty!
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 12 hp and 12 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Replacement air filter part number X-1014-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Hyundai | Veloster | Turbo |
| 2019-2020 | Hyundai | Veloster | Turbo R-Spec |
| 2019-2020 | Hyundai | Veloster | Turbo Ultimate |
$323.09
Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 11 hp and 10 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- CARB EO #: D-476-8 for 2013 model years only
- Replacement air filter part number X-1014-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 9.5 ft./lbs.
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Hyundai | Veloster | Rally Edition |
| 2013-2017 | Hyundai | Veloster | Turbo |
| 2014-2017 | Hyundai | Veloster | Turbo R-Spec |
$323.09
Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 11 hp and 10 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Replacement air filter part number X-1014-BB
- CARB EO #: D-476-8 for 2013 model years only
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
- SuperNano-Web Dry Filter
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Hyundai | Veloster | Rally Edition |
| 2013-2017 | Hyundai | Veloster | Turbo |
| 2014-2017 | Hyundai | Veloster | Turbo R-Spec |
$312.39
Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Available with a polished or Black powder coated finish
- Dyno Proven gains of up to 7 hp and 5 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Increased HP up to 7; Increased Torque up to 5
- Replacement air filter part number X-1010-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- CARB EO is for 2012-2013 model years only.
- Made in Pomona California, USA
- CARB EO #: D-476-8
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Hyundai | Accent | GL |
| 2011-2015 | Hyundai | Accent | GLS |
| 2011-2015 | Hyundai | Accent | GS |
| 2011-2014,2016 | Hyundai | Accent | SE |
| 2015-2016 | Hyundai | Accent | Sport |
| 2012-2017 | Hyundai | Veloster | Base |
| 2016 | Hyundai | Veloster | Rally Edition |
| 2014-2015 | Hyundai | Veloster | RE:FLEX |
| 2013-2017 | Hyundai | Veloster | Turbo |
| 2014-2017 | Hyundai | Veloster | Turbo R-Spec |
| 2017 | Hyundai | Veloster | Value Edition |
$312.39
Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Technical DrawingInstallation Instructions
Installation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Available with a polished or Black powder coated finish
- Dyno Proven gains of up to 7 hp and 5 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Replacement air filter part number X-1010-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- CARB EO is for 2012-2013 model years only.
- Made in Pomona California, USA
- SuperNano-Web Dry Filter
- CARB EO #: D-476-8
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Hyundai | Accent | GL |
| 2011-2015 | Hyundai | Accent | GLS |
| 2011-2015 | Hyundai | Accent | GS |
| 2011-2014,2016-2017 | Hyundai | Accent | SE |
| 2015-2017 | Hyundai | Accent | Sport |
| 2017 | Hyundai | Accent | Value Edition |
| 2012-2017 | Hyundai | Veloster | Base |
| 2016 | Hyundai | Veloster | Rally Edition |
| 2014-2015 | Hyundai | Veloster | RE:FLEX |
| 2013-2017 | Hyundai | Veloster | Turbo |
| 2014-2017 | Hyundai | Veloster | Turbo R-Spec |
| 2017 | Hyundai | Veloster | Value Edition |
$312.39
Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty; Note; This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 11 hp and 10 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Replacement air filter part number X-1017-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
- SuperNano-Web Dry Filter
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2013 | Kia | Forte | EX |
| 2010-2013 | Kia | Forte | LX |
$262.10
Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 10 hp and 10 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Replacement air filter part number X-1014-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
- CARB EO #: D-476-5
- Polished
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2005 | Subaru | Impreza | WRX |
| 2004-2007 | Subaru | Impreza | WRX STI |
| 2007 | Subaru | Impreza | WRX STI Limited |
$262.10
Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Installation InstructionsInstallation Instructions
- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 10 hp and 10 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Replacement air filter part number X-1014-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
- CARB EO #: D-476-5
- Black
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2005 | Subaru | Impreza | WRX |
| 2004-2007 | Subaru | Impreza | WRX STI |
$262.10
Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Installation Instructions- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 12 hp and 10 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Replacement air filter part number X-1020-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- CARB EO for 2002-2005 model years only
- Increased Torque up to 9.8 ft./lbs.
- Made in Pomona, California USA
- CARB EO #: D-476-5
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2006 | Mini | Cooper | Base |
| 2002-2006 | Mini | Cooper | S |
$262.10
Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Installation Instructions- Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
- Provides power gains while maintaining A/F ratios with no additional tuning
- Dyno Proven gains of up to 12 hp and 10 lb-ft. of torque
- Available with a polished or Black powder coated finish
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Replacement air filter part number X-1020-BB
- T6-6061 Mandrel-bent aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- CARB EO for 2002-2005 model years only
- Increased Torque up to 9.8 ft./lbs.
- Made in Pomona, California USA
- CARB EO #: D-476-5
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2006 | Mini | Cooper | Base |
| 2002-2006 | Mini | Cooper | S |
$81.27
This universal heat shield from Injen Technology is manufactured from aircraft grade aluminum with a beautiful polished finish for years of impressive looks under your hood. The Injen HS5000P heat shield has adjustable mounts and allows you fit this onto most 2.75in to 3.00in ID air filters. The HS5000P universal air filter heat shield deflects hot air and allows cool air to feed that hungry engine! Installation is simple and easily performed in under 30 minutes.
Installation InstructionsInstallation Instructions
- Includes all necessary hardware for a hassle-free installation
- Solid aluminum construction w/beautiful polished finish
- Shielding the filter from heat results in more power
- Backed By Injens Limited Lifetime Warranty
- Injen Technology Limited Lifetime Warranty
- For MOST 2.75in. to 3.00in. Air Filters
- Made in Pomona, California USA
$81.27
This universal heat shield from Injen Technology is manufactured from aircraft grade aluminum with a black coating for years of impressive looks under your hood. The Injen HS5000BLK heat shield has adjustable mounts and allows you fit this onto most 2.75in to 3.00in ID air filters. The HS5000BLK universal air filter heat shield deflects hot air and allows cool air to feed that hungry engine! Installation is simple and easily performed in under 30 minutes.
Installation InstructionsInstallation Instructions
- Includes all necessary hardware for a hassle-free installation
- Solid aluminum construction w/black protective finish
- Shielding the filter from heat results in more power
- Backed By Injens Limited Lifetime Warranty
- Injen Technology Limited Lifetime Warranty
- For MOST 2.75in. to 3.00in. Air Filters
- Made in Pomona, California USA
$81.27
This universal heat shield from Injen Technology is manufactured from aircraft grade aluminum with a beautiful polished finish for years of impressive looks under your hood. The Injen HS3500P heat shield has adjustable mounts and allows you fit this onto most 3in to 3.50in ID air filters. The HS3500P universal air filter heat shield deflects hot air and allows cool air to feed that hungry engine! Installation is simple and easily performed in under 30 minutes.
Installation Instructions- Backed By Injens Limited Lifetime Warranty
- Injen Technology Limited Lifetime Warranty
$81.27
This universal heat shield from Injen Technology is manufactured from aircraft grade aluminum with a black coating for years of impressive looks under your hood. The Injen HS3500BLK heat shield has adjustable mounts and allows you fit this onto most 3in to 3.50in ID air filters. The HS3500BLK universal air filter heat shield deflects hot air and allows cool air to feed that hungry engine! Installation is simple and easily performed in under 30 minutes.
Installation Instructions- Backed By Injens Limited Lifetime Warranty
- Injen Technology Limited Lifetime Warranty
$643.02
The 2015-2023 Mustang 2.3L Ecoboost is a great platform for soaking up highway miles during the weekday and tearing it up at the track on the weekend. With some minor modifications, the 2.3L Turbo engine is capable of producing some killer power. Added power will push the limits of the stock charge air system, necessitating an upgrade for the stock tube-and-fin intercooler, which is prone to heat soak. Injen has developed a highly efficient bar-and-plate intercooler engineered specifically to fit the 2015-2023 Ford Mustang 2.3L Ecoboost.
Technical DrawingInstallation Instructions
Installation Instructions
- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Includes all necessary hardware for a hassle-free installation
- Outlet temperature up to 50? lower than stock intercooler
- Dyno Proven gains of up to 17 hp and 17 lb-ft. of torque
- Increases throttle response and decreases turbo lag
- Stock Pressure Drop Retained within 0.5 psi
- Designed to work with stock calibration
- Uses all factory mounting locations
- 21.06 in. x 5.750 in. x 5.28 in.
- TIG-welded Aluminum Bar-Plate
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | Mustang | EcoBoost |
| 2015-2023 | Ford | Mustang | EcoBoost Premium |
$818.50
The all-new Ford F-150 EcoBoost and F-150 Raptor Ecoboost are both great platforms for soaking up highway miles during the weekday and tearing it up in the desert on the weekend! With some minor modifications, the Twin Turbo engine is capable of producing some gnarly power. That added power after some tuning and bolt-ons will push the limits of the stock charged air system necessitating an upgrade over the inefficient stock tube-and-fin intercooler. Thankfully Injen has developed a highly efficient bar-and-plate intercooler engineered specifically to fit the Ford F-150. The FM9102i intercooler is a direct-fit unit and features a 25% increase in core volume while requiring no modification to your truck. This intercooler is constructed with cast end tanks and precision CNC-machined aluminum fittings for use with the factory intercooler piping. The Injen Ford F-150 EcoBoost intercooler reduces intake temperatures by 30?F and provides an increase of up to 29 HP and 33 Ft. Lbs. of torque while retaining factory boost pressure across the core. This F-150 EcoBoost twin turbo intercooler has been meticulously TIG-welded by hand and has a sick finish that is reminiscent of brushed aluminum. With about a one-hour installation, great power, temperature benefits, and a Lifetime Warranty, the Injen FM9102i intercooler is a must-do upgrade for any stock or modified Ford F-150 EcoBoost.
Technical DrawingInstallation Instructions
- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Includes all necessary hardware for a hassle-free installation
- Outlet temperature up to 30? lower than stock intercooler
- Dyno Proven gains of up to 29 hp and 33 lb-ft. of torque
- Increases throttle response and decreases turbo lag
- Stock Pressure Drop Retained within 0.5 psi
- Injen Technology Limited Lifetime Warranty
- Designed to work with stock calibration
- Uses all factory mounting locations
- All Factory Mounting Locations
- Made in Pomona, California USA
- TIG-welded Aluminum Bar-Plate
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | F-150 | King Ranch |
| 2015-2023 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2023 | Ford | F-150 | Platinum |
| 2018-2023 | Ford | F-150 | Police Responder |
| 2017-2023 | Ford | F-150 | Raptor |
| 2016-2023 | Ford | F-150 | SSV |
| 2021-2023 | Ford | F-150 | Tremor |
| 2015-2023 | Ford | F-150 | XL |
| 2015-2023 | Ford | F-150 | XLT |
$666.56
The all new Type-R Civic (FK8) is a great platform for soaking up highway miles during the weekday and tearing it up at the track on the weekend! With some minor modifications, the 2.0L Turbo engine is capable of producing some gnarly power. But, the added power of some tuning and bolt-ons will push the limits of the stock charge air system, necessitating an upgrade for the stock tube-and-fin intercooler, which is prone to heat soak. Thankfully Injen has developed a highly efficient bar-and-plate intercooler engineered specifically to fit the Type-R Civic. The FM1582i intercooler is a direct-fit unit and features a 25% increase in core volume while requiring no modification to your civic. This cooler is constructed with cast end tanks and precision CNC-machined aluminum flanges for use with the factory intercooler piping. The Injen Honda Civic Type-R intercooler reduces intake temperatures by 30?F and provides an increase of up to 27 HP and 23 Ft. Lbs. of torque while retaining factory boost pressure across the core. This Civic Type-R 2.0L turbo intercooler also features precision TIG-welding and has a unique silver finish that is reminiscent of brushed aluminum. With a one-hour installation, great power, temperature benefits, and a Lifetime Warranty, the Injen FM1582i intercooler is a must-do upgrade for any stock or modified Civic type-R.
Technical DrawingInstallation Instructions
Installation Instructions
- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Optional intercooler piping kit available. Part # SES1582ICP
- Optional intercooler piping kit available. P/N# SES1582ICP
- Dyno Proven gains of up to 27 hp and 23 lb-ft. of torque
- Intercooler core dimensions 21.06 x 5.750 x 5.28
- CAD designed end tanks for optimal air flow.
- 100% Direct bolt-on front mount intercooler
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- All Factory Mounting Locations
- Made in Pomona, California USA
- No piping included.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | Type R |
$643.02
The 10th GEN Civic is a great platform for soaking up highway miles during the weekday and tearing it up at the track on the weekend. With some minor modifications, the 1.5L Turbo engine is capable of producing some killer power. Added power will push the limits of the stock charge air system, necessitating an upgrade for the stock tube-and-fin intercooler, which is prone to heat soak. Injen has developed a highly efficient bar-and-plate intercooler engineered specifically to fit the 2016-2021 Honda Civic I4-1.5L(t) and the 2017-2020 Honda Civic Si I4-1.5L(t), , The FM1573i intercooler is a direct-fit unit and features a 25% increase in core volume while requiring no modification to your civic. This cooler is constructed with cast end tanks and precision CNC-machined aluminum flanges for use with the factory intercooler piping. The Injen Honda Civic intercooler reduces intake temperatures by 24?F and provides an increase of up to 16 HP and 19 Lbs. of torque while retaining factory boost pressure across the core. , , This Civic 1.5L turbo intercooler also features precision TIG-welding and has a unique silver finish that is reminiscent of brushed aluminum. With an installation time of one-hour, great power and temperature benefits, and a Lifetime Warranty, the Injen FM1573i intercooler is a must-do upgrade for any stock or modified 10th Gen turbo Civic.
Technical DrawingInstallation Instructions
- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Optional intercooler piping kit available. Part # SES1573ICP
- Optional intercooler piping kit available. P/N# SES1573ICP
- Dyno Proven gains of up to 16 hp and 19 lb-ft. of torque
- 100% Bolt-On Installation - No Custom Tuning Required
- Intercooler core dimensions 21.06 x 5.750 x 5.28
- CAD designed end tanks for optimal air flow.
- 100% Direct bolt-on front mount intercooler
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
- No piping included.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | EX |
| 2016-2021 | Honda | Civic | EX-L |
| 2016-2018 | Honda | Civic | EX-T |
| 2017-2021 | Honda | Civic | LX |
| 2017-2020 | Honda | Civic | Si |
| 2017-2021 | Honda | Civic | Sport |
| 2017-2021 | Honda | Civic | Sport Touring |
| 2016-2021 | Honda | Civic | Touring |
$524.95
Injen Technology's new EVO9302 Cold Air Intake for the 2021-2026 Ford Bronco's equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9302 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!
DatasheetInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
- Unlike the competition, the Injen intake tube goes all the way to the turbo
- Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9302C
- No Tune Required - Designed to work seamless with the stock calibration
- Custom tapered dual intake tube for increased airflow to both turbos
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1116-BB
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2024-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$472.45
Injen Technology's new EVO9301C Cold Air Intake for the 2021-2022 Ford Bronco's equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9301C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!
DatasheetInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
- Unlike the competition, the Injen intake tubes goes all the way to the turbos
- Also available with a SuperNano-Web dry air Filter: Intake system P/N EVO9301
- No Tune Required - Designed to work seamless with the stock calibration
- Custom tapered dual intake tube for increased airflow to both turbos
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Optional Air Filter Cleaning Kit also Available - X-1030
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1116-BR
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2022 | Ford | Bronco | Badlands |
| 2021-2022 | Ford | Bronco | Base |
| 2021-2022 | Ford | Bronco | Big Bend |
| 2021-2022 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2021-2022 | Ford | Bronco | Outer Banks |
| 2021-2022 | Ford | Bronco | Wildtrak |
$472.45
Injen Technology's new EVO9301 Cold Air Intake for the 2021-2022 Ford Bronco's equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9301 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!
DatasheetInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
- Unlike the competition, the Injen intake tubes goes all the way to the turbos
- Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9301C
- No Tune Required - Designed to work seamless with the stock calibration
- Custom tapered dual intake tube for increased airflow to both turbos
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1116-BB
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2022 | Ford | Bronco | Badlands |
| 2021-2022 | Ford | Bronco | Base |
| 2021-2022 | Ford | Bronco | Big Bend |
| 2021-2022 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2021-2022 | Ford | Bronco | Outer Banks |
| 2021-2022 | Ford | Bronco | Wildtrak |
$419.95
Injen Technology's new EVO9300C Cold Air Intake for the 2021-2024 Ford Bronco's equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9300C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!
DatasheetInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
- Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
- Unlike the competition, the Injen intake tube goes all the way to the turbo
- No Tune Required - Designed to work seamless with the stock calibration
- Also available with a Dry Air Filter: Intake system P/N EVO9300
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze air filter
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Optional Injen air filter cleaning kit part number X-1030
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1116-BR
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
$419.95
Injen Technology's new EVO9300 Cold Air Intake for the 2021-2024 Ford Bronco's equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9300 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!
DatasheetInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
- Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
- Unlike the competition, the Injen intake tube goes all the way to the turbo
- Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9300C
- No Tune Required - Designed to work seamless with the stock calibration
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1116-BB
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
$415.75
The all-new EVO9205 Evolution cold air intake system by Injen Technology is the next generation of performance intake systems for the 2015-2023 Ford Mustang with the 2.3L EcoBoost engine. Every EVO9205 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS.
DatasheetInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
- Large forward-facing inlet to maximize incoming cool air from behind the grille
- No Tune Required - Designed to work seamless with the stock calibration
- Intake tube features Injen's patented internal MegaRam (MR) Technology
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 23 hp and 21 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1107-BB
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | Mustang | EcoBoost |
| 2015-2023 | Ford | Mustang | EcoBoost Premium |
$393.70
The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9204 is specifically engineered for the 2015-2017 Ford Mustang GT with the 5.0L engine. Every EVO9204 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9204 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9204 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth rotational molded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9204 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9204 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation ? this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry engine, ,
Datasheet- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 23 hp and 33 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1130-BB
- Designed to work with the stock calibration
- Stainless Steel Hardware/Clamps And Screws
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
- forward facing ram air scoop
- Fully functioning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Ford | Mustang | GT |
Showing 570/673
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.