The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9203 is specifically engineered for the 2015-2019 Ford Mustang with the 2.3L EcoBoost engine. Every EVO9203 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9203 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9203 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth rotational molded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9203 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9203 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation ? this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 16 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1130-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• forward facing ram air scoop
• Fully functioning

This Part Fits:

The EVO9202 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9202 system features our patent-pending twist-lock system that eases the installation process and securely mounts a massive SuperNano-Web dry air filter. Injen has a smooth rotational molded induction tube for reduced restriction levels and premium hardware for easy installation. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! The EVO9202 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?..

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Aggressive under hood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 26 hp and 23 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Fully functioning, forward facing ram air scoop
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9108 is specifically engineered for the 2011-2014 Ford F-150 with the 5.0L engine. Every EVO9108 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9108 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9108 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth 6061 aluminum induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9108 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9108 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation ? this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Attaches directly to the factory airbox for a drop-in installation
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 17 hp and 16 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1129-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

Give your 2015-2020 F-150/F-150 Raptor, Expedition, or Lincoln Navigator that added punch you crave with the EVO9107C Evolution Cold Air Intake System by Injen Technology. The EVO9107 is specifically engineered for the 2.7L and 3.5L EcoBoost engine. Every EVO9107 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 14 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene housing and scoop
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1125-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1073BLK
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9105 is specifically engineered for the 2011-2014 Ford F-150 with the 3.5L EcoBoost engine. Every EVO9105 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9105 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9105 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9105 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9105 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Attaches directly to the factory airbox for a drop-in installation
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 18 hp and 21 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1129-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

Give your 2015-2020 F-150/F-150 Raptor, Expedition, or Lincoln Navigator that added punch you crave with the EVO9104 Evolution Cold Air Intake System by Injen Technology. The EVO9104 is specifically engineered for the 2.7L and 3.5L EcoBoost engine. Every EVO9104 cold air intake is made in the USA from cross-linked high-density XLPE polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Unique and Patented Twist Lock Filter-to-Housing attachment for Easy Installation
• Clear-Vue Window Provides Easy Inspection of Filter Without Disassembly
• Durable XLPE Crosslinked Roto-Molded Polyethylene housing and scoop
• Intake scoop is designed to capture the largest amount of cool air
• Also available with a Dry Air Filter: Intake system P/N EVO9104
• Aggressive under hood appearance while maintaining an OE fit
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 19 hp and 21 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Replacement air filter part number X-1116-BR
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA
• Does NOT fit hybrid models

This Part Fits:

Give your 2015-2020 F-150/F-150 Raptor, Expedition, or Lincoln Navigator that added punch you crave with the EVO9104 Evolution Cold Air Intake System by Injen Technology. The EVO9104 is specifically engineered for the 2.7L and 3.5L EcoBoost engine. Every EVO9104 cold air intake is made in the USA from cross-linked high-density XLPE polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Unique and Patented Twist Lock Filter-to-Housing attachment for Easy Installation
• Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9104C
• Clear-Vue Window Provides Easy Inspection of Filter Without Disassembly
• Durable XLPE Crosslinked Roto-Molded Polyethylene housing and scoop
• Intake scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 21 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Replacement air filter part number X-1116-BB
• Designed to work with the stock calibration
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Stainless Steel Hardware/Clamps And Screws
• Made in Pomona California, USA
• Does NOT fit hybrid models

This Part Fits:

Your search for the best performing cold air intake that also protects your valuable 2020-2024 Ford F-Series Super Duty is over. You just found the Injen EVO9007C that is specifically engineered for the 2020-2024 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. We've taken every ounce of our 20+ years of experience to create the most versatile kit on the market today, without complicating the installation process. With an incredible 63 additional lb-ft. of torque at the pedal, you can be sure that your truck is more than equipped to tackle towing just about any load, all while retaining factory fuel trims and A/F ratios to prevent damage to your expensive motor.

• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• Works seamlessly with our hot and cold side charge pipe system P/N SES9004ICP or SES9004ICPWB
• Includes removable Urethane Plugs for heavily tuned trucks that require additional airflow
• Also available as a kit with our Dry Air Filter: Intake system P/N EVO9007
• This intake is CARB approved under EO# D-476-13 for model years 2020-2022.
• No Tune Required - Designed to work seamless with the stock calibration
• Intake tube features Injen's patented internal MegaRam (MR) Technology
• Durable XLPE Roto-Molded Polyethylene tube and filter housing
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 28 hp and 63 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Stainless steel band clamps with inner protective liner
• 2023-2024 models have not yet received CARB approval
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BR
• Made in Pomona California, USA

This Part Fits:

Your search for the best performing cold air intake that also protects your valuable 2020-2024 Ford F-Series Super Duty is over. You just found the Injen EVO9007 that is specifically engineered for the 2020-2024 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. We've taken every ounce of our 20+ years of experience to create the most versatile kit on the market today, without complicating the installation process. With an incredible 63 additional lb-ft. of torque at the pedal, you can be sure that your truck is more than equipped to tackle towing just about any load, all while retaining factory fuel trims and A/F ratios to prevent damage to your expensive motor.

• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• Works seamlessly with our hot and cold side charge pipe system P/N SES9004ICP or SES9004ICPWB
• Includes removable Urethane Plugs for heavily tuned trucks that require additional airflow
• Also available as a kit with our 8-Layer Oiled Air Filter: Intake system P/N EVO9007C
• This intake is CARB approved under EO# D-476-13 for model years 2020-2022.
• No Tune Required - Designed to work seamless with the stock calibration
• Intake tube features Injen's patented internal MegaRam (MR) Technology
• Durable XLPE Roto-Molded Polyethylene tube and filter housing
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 28 hp and 63 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• 2023-2024 models have not yet received CARB approval
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9006 is specifically engineered for the 2011-2016 Ford Diesel Trucks with the 6.7L Powerstroke engine. Every EVO9006 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9006 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9006 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9006 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9006 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Engineered to work seamlessly with the factory ram air system. Roto-molded Intake Tube; The EVO9006 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 52 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1124-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Optional hydroshield part number 1072BLK
• Made in Pomona, California USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9005 is specifically engineered for the 2008-2010 Ford Diesel Trucks with the 6.4L Powerstroke engine. Every EVO9005 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9005 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9005 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9005 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9005 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Engineered to work seamlessly with the factory ram air system. Roto-molded Intake Tube; The EVO9005 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 23 hp and 53 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1126-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1075BLK
• Made in Pomona, California USA

This Part Fits:

Your search for the best performing cold air intake that also protects your valuable 2017-2019 Ford F-Series Super Duty is over. You just found the Injen EVO9004C that is specifically engineered for the 2017-2019 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. The engineers at Injen designed a custom battery relocation box that allows the airbox to be moved safely to the front of the engine bay. This swap provides two benefits. The first benefit is moving the airbox closer and in direct alignment with the factory air inlet to feed cool, fresh air to that hungry turbo diesel. The second benefit from moving the airbox forward is the path for the intake tract is now smoothed out and requires far less bends. This results in a further reduction in restriction and increased power output.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Battery relocation tray allows the airbox to be moved for a cooler air charge and reduced restriction
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• No Tune Required - Designed to work seamless with the stock calibration
• Intake tube features Injen's patented internal MegaRam (MR) Technology
• Durable XLPE Roto-Molded Polyethylene tube, Battery Tray, and housing
• Also available with a dry air filter ? Intake system P/N EVO9004
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 20 hp and 41 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Stainless steel band clamps with inner protective liner
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1113-BR
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2019-2024 RAM 1500 (DT) trucks equipped with the V8-5.7L is unmatched in the aftermarket. The EVO8101C is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8101C housing encloses an Injen 8-Layer oiled cotton gauze air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO8101C comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
• Also available with our SuperNano-Web Dry Air Filter: Intake system P/N EVO8101
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Does not fit the classic body style (DS) RAM trucks
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BR
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2019-2024 RAM 1500 (DT) trucks equipped with the V8-5.7L is unmatched in the aftermarket. The EVO8101 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8101 housing encloses an Injen SuperNano-Web Dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO8101 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
• Also available with an 8-Layer oiled Air FIlter: Intake system P/N EVO8101C
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Fully serviceable Injen SuperNano-Web dry air filter
• Does not fit the classic body (DS) style RAM trucks
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2009-2018 Dodge RAM 1500 and the 2019-2023 RAM 1500 (Classic) is unmatched in the aftermarket. The EVO8100C is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8100C housing encloses an Injen 8-Layer oiled cotton gauze air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO8100C comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Also available with our dry Air FIlter ? Intake system P/N EVO8100
• Smooth intake piping eliminates restrictions and improves airflow
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 12 hp and 13 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BR
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2009-2018 Dodge RAM 1500 and the 2019-2023 RAM 1500 (Classic) is unmatched in the aftermarket. The EVO8100 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8100 housing encloses an Injen SuperNano-Web dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO8100 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Also available with a 8-Layer oiled Air FIlter ? Intake system P/N EVO8100C
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 12 hp and 13 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems and the EVO8008C is no exception. The Injen EVO8008C is specifically engineered for the 2019-2022 RAM trucks with the 6.7L Cummins Diesel engine. This amazing intake system was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque across the entire powerband. The EVO8008C is a beautiful system that features our patented twist-lock filter mounting system, our patented MR technology for precise fueling without check engine lights, a massive 360 degree 8-Layer Oiled Cotton Gauze air filter, a smooth Rotomolded induction tube for reduced restriction levels, and an integrated scoop that seamlessly connects to your factory inlet to deliver that cool, crisp air that your turbo diesel demands.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
• Also available with our SuperNano-Web Dry Air Filter: Intake system P/N EVO8008
• Also available is our X-Pedal Throttle Response Controller: Part Number PT0013B
• Fully functional scoop works seamlessly with the factory ram air scoop
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 15 hp and 33 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• NOTE: Does not fit the classic body style RAM trucks
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1113-BR
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems and the EVO8008 is no exception. The Injen EVO8008 is specifically engineered for the 2019-2022 RAM trucks with the 6.7L Cummins Diesel engine. This amazing intake system was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque across the entire powerband. The EVO8008 is a beautiful system that features our patented twist-lock filter mounting system, our patented MR technology for precise fueling without check engine lights, a massive 360 degree SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and an integrated scoop that seamlessly connects to your factory inlet to deliver that cool, crisp air that your turbo diesel demands.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
• Also available is our X-Pedal Throttle Response Controller: Part Number PT0013B
• Also available with an 8-Layer oiled Air Filter: Intake system P/N EVO8008C
• Fully functional scoop works seamlessly with the factory ram air scoop
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 15 hp and 33 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• NOTE: Does not fit the classic body style RAM trucks
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1113-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The EVO8007C was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO8007C system features our 2-piece box design that incorporates our boost plenum, a massive 360-degree 8-layer oiled cotton gauze air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO8007C cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?..

• Also available with our SuperNano-Web Dry Air Filter: Intake system P/N EVO8007
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 23 hp and 65 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1125-BR
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA
• CARB EO# D-476-9

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO8007 is specifically engineered for the 2013-2018 Dodge/RAM trucks with the 6.7L Cummins engine. Every EVO8007 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO8007 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO8007 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO8007 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO8007 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Engineered to work seamlessly with the factory ram air system. Roto-molded Intake Tube; The EVO8007 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 23 hp and 65 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Designed to work with the factory ram air door
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1125-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• CARB E.O.# D-476-9

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO8006 is specifically engineered for the 2010-2012 Dodge/RAM trucks with the 6.7L Cummins engine. Every EVO8006 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO8006 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO8006 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO8006 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO8006 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Roto-molded Intake Tube; The EVO8006 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 22 hp and 65 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1125-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• CARB E.O.# D-476-9

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO8005 is specifically engineered for the 2007-2009 Dodge/RAM trucks with the 6.7L Cummins engine. Every EVO8005 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO8005 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO8005 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO8005 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO8005 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Roto-molded Intake Tube; The EVO8005 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 20 hp and 53 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1125-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• CARB E.O.# D-476-9

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO8004 is specifically engineered for the 2003-2007 Dodge Diesel trucks with the 5.9L Cummins engine. Every EVO8004 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO8004 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO8004 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO8004 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO8004 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Roto-molded Intake Tube; The EVO8004 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 25 hp and 62 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1125-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• CARB E.O.# D-476-9

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO7302 for the 2013-2019 Cadillac ATS I4-2.0L Turbo! This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel. The EVO7302 cold air intake system is on a whole new level. From the one-piece sealed housing - that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place - all the way down to premium hardware, Injen has put it all on the table to give you, the customer, the best intake available!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO7302 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Roto-molded Intake Tube; The EVO7302 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 29 hp and 30 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1104-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Larger Inlet Air Scoop And Induction Tube
• Made in Pomona, California USA

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO7301 for the 2016-2020 Chevrolet Camaro SS! This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel. The EVO7301 cold air intake system is on a whole new level. From the one-piece sealed housing - that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place - all the way down to premium hardware, Injen has put it all on the table to give you, the customer, the best intake available

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 13 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Dyno-Proven Max Gains Up To 15 Hp; 13 ft./lbs Torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1093-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

"Introducing the all-new Evolution sealed air intake system Part Number EVO7300 for the 2016-2020 Chevrolet Camaro 2.0L Turbo! This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel. The EVO7300 cold air intake system is on a whole new level. From the one-piece sealed housing - that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place - all the way down to premium hardware, Injen has put it all on the table to give you, the customer, the best intake available!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 34 hp and 42 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1093-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1118BLK
• Increased Torque Up To 42 ft./lbs.
• Made in Pomona, California USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2015-2019 Chevrolet Corvette Z06 is unmatched in the aftermarket. The EVO7203 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. The EVO7203 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. The EVO7203 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box. Roto-molded Housing; The EVO7203 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. Roto-molded Intake Tube; The EVO7203 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights, ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 32 hp and 30 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1129-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2014-2019 Chevrolet Corvette V8-6.2L is unmatched in the aftermarket. The EVO7202 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. The EVO7202 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. The EVO7202 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box. Roto-molded Housing; The EVO7202 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. Roto-molded Intake Tube; The EVO7202 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights, ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1129-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2019-2025 GM Trucks and SUVs is quite literally unmatched in the aftermarket. The EVO7104C is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO7104C housing encloses an Injen 8-Layer oiled cotton gauze air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO7104C comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Also available with our dry Air FIlter: Intake system P/N EVO7104
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Features Injen's patented internal MegaRam (MR) Technology
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BR
• Designed to work with the stock calibration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2019-2025 GM Trucks and SUVs is quite literally unmatched in the aftermarket. The EVO7104 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO7104 housing encloses an Injen SuperNano-Web dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO7104 comes with all the necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Also available with a 8-Layer Oiled Air FIlter: Intake system P/N EVO7104C
• Aggressive under hood appearance while maintaining an OE fit
• Features Injen's patented internal MegaRam (MR) Technology
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona California, USA

This Part Fits: