Injen's all new Evolution series sealed cold air intake system for the 2014-2019 GM Trucks and the 2015-2020 GM SUV is unmatched in the aftermarket. The EVO7103 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View air filter inspection badge for easy filter inspection. This badge has an eye catching red stripe with a white Injen logo that really pops when you open your hood. The EVO7103 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. The EVO7103 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box. Roto-molded Housing; The two-piece housing utilizes the Injen inspection badge allowing for easy visual inspection of the air filter, along with adding a hint of style with white on red Injen logo. The entire housing was developed in 3D and ensures a hassle-free installation. Roto-molded Intake Tube; The EVO7103 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights, ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 16 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1101-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1074BLK
• Increased Torque Up To 16 ft./lbs.
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2009-2013 GM Trucks (GMT900) and 2009-2014 GM SUV (GMT900) is unmatched in the aftermarket. The EVO7102 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View air filter inspection badge for easy filter inspection. This badge has an eye catching red stripe with a white Injen logo that really pops when you open your hood. The EVO7102 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. The EVO7102 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box. Roto-molded Housing; The two-piece housing utilizes the Injen inspection badge allowing for easy visual inspection of the air filter, along with adding a hint of style with white on red Injen logo. The entire housing was developed in 3D and ensures a hassle-free installation. Roto-molded Intake Tube; The EVO7102 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights, ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1101-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1074BLK
• Increased Torque Up To 13 ft./lbs.
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 1999-2007 GM Trucks (GMT800) is unmatched in the aftermarket. The EVO7100 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View air filter inspection badge for easy filter inspection. This badge has an eye catching red stripe with a white Injen logo that really pops when you open your hood. The EVO7100 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. The EVO7100 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box. Roto-molded Housing; The two-piece housing utilizes the Injen inspection badge allowing for easy visual inspection of the air filter, along with adding a hint of style with white on red Injen logo. The entire housing was developed in 3D and ensures a hassle-free installation. Roto-molded Intake Tube; The EVO7100 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• 2007 Silverado/Sierra Hybrid SULEV Engine test group number - 7GMXT05.33386
• Aggressive under hood appearance while maintaining an OE fit
• Durable Roto-Molded Polyethylene housing and intake tube
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Dyno Proven gains of up to 8 hp and 8 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1101-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1074BLK
• The following are not CARB exempt:
• Increased Torque Up To 8 ft./lbs.
• Made in Pomona California, USA
• CARB EO# D-476-12

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO7014 is specifically engineered for the 2015-2016 GM Diesel trucks with the 6.6L LML Duramax engine. Every EVO7014 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO7014 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO7014 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO7014 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO7014 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Roto-molded Intake Tube; The EVO7014 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 30 hp and 80 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1101-BB
• Designed for vehicles with dual MAF sensors
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Optional hydroshield part number 1074BLK
• Made in Pomona, California USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO7008 is specifically engineered for the 2001-2004 GM Diesel trucks with the 6.6L LB7 Duramax engine. Every EVO7008 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO7008 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO7008 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO7008 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO7008 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Roto-molded Intake Tube; The EVO7008 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 21 hp and 43 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1101-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Optional hydroshield part number 1074BLK
• Made in Pomona, California USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO7007C is specifically engineered for the 2017-2019 GM Diesel trucks with the 6.6L L5P Duramax engine. Every EVO7007C cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO7007C was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO7007C system features our one-piece sealed housing that utilizes the all-new and patented Injen Twist-Lock System to securely attach the huge 8-layer oiled cotton gauze in place. The Twist Lock system eliminates the use of unnecessary parts and provides one of the simplest installations on the market. The EVO7007C housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the huge 8-layer oiled cotton gauze air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO7007C housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Roto-molded Intake Tube; The EVO7007C Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights, ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 34 hp and 76 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1113-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO7007 is specifically engineered for the 2017-2019 GM Diesel trucks with the 6.6L L5P Duramax engine. Every EVO7007 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO7007 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO7007 system features our one-piece sealed housing that utilizes the all-new and patented Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist Lock system eliminates the use of unnecessary parts and provides one of the simplest installations on the market. The EVO7007 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO7007 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Roto-molded Intake Tube; The EVO7007 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights, ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 34 hp and 76 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1113-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel. The cold air intake system is next level. From the one-piece sealed housing - that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place - all the way down to premium hardware, Injen has put it all on the table to give you, the customer, the best intake available! The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive underhood appearance. The Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. "OMG that's massive!" is all you will hear about this SuperNano-Web Dry air filter that is included. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock system has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power while keeping the installation process quick and simple. From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a top-notch kit.

• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 21 hp and 21 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Inspection Badge To Check Condition Of Filter
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona California, USA
• CARB EO# D-476-11

This Part Fits:

SuperNano-Web Dry Air Filter: "OMG that's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included in the EVO5101. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock system has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a top-notch kit. So after hours of designing and dyno testing, Injen is proud to say that the EVO5101 Evolution Air Intake system puts down numbers of up to 13 additional horsepower and 13 Ft.-lbs. of torque.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 13 hp and 13 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona, California USA

This Part Fits:

In 1988, a young entrepreneur named Ron Delgado was working late into the evening – trying to find a better way to polish products for his family "job shop" business. At the time, most machines only polished along flat surfaces. But when Ron had the idea for a multi-axis machine – which could polish better and faster than anything he had used before - he was determined to make it a reality. What began as a mission to perfect the art of polishing soon grew into a full-fledged quest to develop industry-changing design and manufacturing solutions. And, in 1991 – as the demand for high quality aftermarket air induction products began to reach scale – Ron knew he had found an opportunity to make his mark on an industry he loved. Launching Injen – with a pioneering patent that allowed enthusiasts to achieve better performance from their vehicles without annoying "Check Engine Lights" (CEL's) – Ron and his team have never waivered from their commitment to innovate and deliver products that solve for the increasingly complex nature of vehicles brought to market. Nearly three decades later – with several more patents developed and applied to several thousand new products - the Injen brand has become a household name among enthusiasts who demand high quality, dyno-proven solutions for their vehicles. As we continue to grow – expanding into new market segments and to further regions of the world – the Injen team holds steadfast to the vision of our founder with innovation that transforms the look and performance of your vehicle.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive underHood appearance while maintaining an OE fit
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 19 hp and 21 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BR
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona, California USA
• Made In Pomona California USA

This Part Fits:

SuperNano-Web Dry Air Filter: "OMG that's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included in the EVO5100. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock system has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a top-notch kit. So after hours of designing and dyno testing, Injen is proud to say that the EVO5100 Evolution Air Intake system puts down numbers of up to 19 additional horsepower and 21 Ft.-lbs. of torque.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 19 hp and 21 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona, California USA

This Part Fits:

The EVO5009 is the starting point of our industry-first, fully modular intake system for the Jeep Wrangler. Utilizing the EVO15069 Ram Air Scoop or the EVO15070 Snorkel (both sold separately), you can quickly switch from a normal intake kit to cold air kit with ram air, or switch to a cold air kit that features a fully functional snorkel. This is a one-of-a-kind kit and absolutely the best choice on the market. Every EVO5009 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. The installation process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• One of a kind modular system that adapts our snorkel or ram air scoop (sold separately)
• Aggressive under hood appearance while maintaining an OE fit
• Durable Roto-Molded Polyethylene housing and intake tube
• Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1108-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA
• Ram Air Scoop P/N is EVO15069
• Snorkel P/N is EVO15070

This Part Fits:

The Evolution of cold air intakes is here for your 2012-2017 Jeep Wrangler with the 3.6L V6. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO5008 is the starting point of the first, fully modular intake system for the Jeep Wrangler. Utilizing the EVO15069 Ram Air Scoop or the EVO15070 Snorkel (both sold separately), you can quickly switch from a normal intake kit to cold air kit with ram air, or switch to a cold air kit that features a fully functional snorkel. This is a one-of-a-kind kit and absolutely the best choice on the market. Every EVO5008 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. The installation process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO5008 system features our 2-piece box design that incorporates our boost plenum and modular air box. The system also uses our massive 360? SuperNano-Web dry air filter, and our CAD designed smooth Rotomolded induction tube for reduced restriction levels. The EVO5008 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. , , Roto-molded Housing w/ integrated Ram Air Scoop; The EVO5008 system features our 2-piece box design that incorporates our boost plenum. The box is fully modular and adapts to our Ram Air Scoop (EVO15069) or our Snorkel (EVO15070) ? both of which are sold separately. This allows you to switch from a normal intake kit to a snorkel system to a ram air kit ? all utilizing the Injen EVO5008 as a starting point. , , Roto-molded Intake Tube; The EVO5008 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• One of a kind modular system that adapts our snorkel or ram air scoop (sold separately)
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1127-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1077BLK
• Made in Pomona, California USA

This Part Fits:

The Evolution of cold air intakes is here for your 2007-2011 Jeep Wrangler with the 3.8L V6. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO5007 is the starting point of the first, fully modular intake system for the Jeep Wrangler. Utilizing the EVO15069 Ram Air Scoop or the EVO15070 Snorkel (both sold separately), you can quickly switch from a normal intake kit to cold air kit with ram air, or switch to a cold air kit that features a fully functional snorkel. This is a one-of-a-kind kit and absolutely the best choice on the market. Every EVO5007 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. The installation process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO5007 system features our 2-piece box design that incorporates our boost plenum and modular air box. The system also uses our massive 360? SuperNano-Web dry air filter, and our CAD designed smooth Rotomolded induction tube for reduced restriction levels. The EVO5007 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. , , Roto-molded Housing and boost plenum; The EVO5007 system features our 2-piece box design that incorporates our boost plenum. The box is fully modular and adapts to our Ram Air Scoop (EVO15069) or our Snorkel (EVO15070) ? both of which are sold separately. This allows you to switch from a normal intake kit to a snorkel system to a ram air kit ? all utilizing the Injen EVO5007 as a starting point. , , Roto-molded Intake Tube; The EVO5007 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• One of a kind modular system that adapts our snorkel or ram air scoop (sold separately)
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Stainless steel band clamps with inner protective liner
• Dyno Proven gains of up to 7 hp and 6 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1127-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1077BLK
• Made in Pomona, California USA

This Part Fits:

The Evolution of cold air intakes is here for your 2018-2023 Jeep Wrangler JL with the 2.0L Turbo engine. The Evolution cold air intake system by Injen Technology is the next generation performance intake system for your Jeep Wrangler JL. The EVO5006C continues our effort to have a fully modular intake system for the Jeep Wrangler. Keeping this modular concept from our popular JK series, you can easily adapt our intake to with our fully-functional snorkel system ? part number EVO15168 (sold separately). This is a one-of-a-kind kit that is absolutely the best choice on the market for your Jeep Wrangler. Every EVO5006C cold air intake is made in the USA from cross linked high density polyethylene for extreme durability and long-lasting looks. This kit include stainless steel hardware and automotive grade urethane couplers for a quick and robust installation. Speaking of the installation, the process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the 8-Layer oiled cotton gauze air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO5006C housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO5006C Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• One of a kind modular system that adapts our snorkel (sold separately - EVO15168)
• Optional Injen air filter cleaning kit also Available, Part Number X-1030
• Also available with a Dry Air Filter ? Intake system P/N EVO5006
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Durable Roto-Molded Polyethylene housing and intake tube
• Dyno Proven gains of up to 9 hp and 12 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1108-BR
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here for your 2018-2023 Jeep Wrangler JL with the 2.0L Turbo engine. The Evolution cold air intake system by Injen Technology is the next generation performance intake system for your Jeep Wrangler JL. The EVO5006 continues our effort to have a fully modular intake system for the Jeep Wrangler. Keeping this modular concept from our popular JK series, you can easily adapt our intake to with our fully-functional snorkel system ? part number EVO15168 (sold separately). This is a one-of-a-kind kit that is absolutely the best choice on the market for your Jeep Wrangler. Every EVO5006 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability and long-lasting looks. This kit include stainless steel hardware and automotive grade urethane couplers for a quick and robust installation. Speaking of the installation, the process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO5006 housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO5006 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• One of a kind modular system that adapts our snorkel (sold separately - EVO15168)
• Also available with an oiled Air Filter ? Intake system P/N EVO5006C
• Aggressive under hood appearance while maintaining an OE fit
• Durable Roto-Molded Polyethylene housing and intake tube
• Dyno Proven gains of up to 9 hp and 12 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1108-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here for your 2018-2025 Jeep Wrangler JL and the 2020-2025 Jeep Gladiator JT - both with the 3.6L V6 engine. The Evolution cold air intake system by Injen Technology is the next generation performance intake system for your Jeep Wrangler JL. The EVO5005C continues our effort to have a fully modular intake system for the Jeep Wrangler. Keeping this modular concept from our popular JK series, you can easily adapt our intake to with our fully-functional snorkel system ? part number EVO15168 (sold separately). This is a one-of-a-kind kit that is absolutely the best choice on the market for your Jeep Wrangler. Every EVO5005C cold air intake is made in the USA from cross linked high density polyethylene for extreme durability and long-lasting looks. This kit include stainless steel hardware and automotive grade urethane couplers for a quick and robust installation. Speaking of the installation, the process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the 8-Layer oiled cotton gauze air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO5005C housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO5005C Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,

• One of a kind modular system that adapts our snorkel (sold separately - EVO15168)
• CARB EO# D-476-10 Does not apply to 2020 model years or the Gladiator
• CARB EO# D-476-10 only applies to 2018-2019 model year Wranglers
• Aggressive under hood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 11 hp and 11 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Optional Air Filter Cleaning Kit also Available - X-1030
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1108-BR
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA
• CARB EO# D-476-10

This Part Fits:

The Evolution of cold air intakes is here for your 2018-2025 Jeep Wrangler JL and the 2020-2025 Jeep Gladiator JT - both with the 3.6L V6 engine. The Evolution cold air intake system by Injen Technology is the next generation performance intake system for your Jeep Wrangler JL. The EVO5005 continues our effort to have a fully modular intake system for the Jeep Wrangler. Keeping this modular concept from our popular JK series, you can easily adapt our intake to with our fully-functional snorkel system ? part number EVO15168 (sold separately). This is a one-of-a-kind kit that is absolutely the best choice on the market for your Jeep Wrangler. Every EVO5005 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability and long-lasting looks. This kit include stainless steel hardware and automotive grade urethane couplers for a quick and robust installation. Speaking of the installation, the process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO5005 housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO5005 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,

• One of a kind modular system that adapts our snorkel (sold separately - EVO15168)
• CARB EO# D-476-10 Does not apply to 2020 model years or the Gladiator
• CARB EO# D-476-10 only applies to 2018-2019 model year Wranglers
• Aggressive under hood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Durable Roto-Molded Polyethylene housing and intake tube
• Dyno Proven gains of up to 11 hp and 11 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1108-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA
• CARB EO# D-476-10

This Part Fits:

Give your Audi S3, Audi TTS Quattro or Volkswagen Golf-R that added punch you crave with the EVO3005 Evolution Cold Air Intake System by Injen Technology. The EVO3005 is specifically engineered for the 2015-2020 Audi S3, 2016-2023 Audi TTS Quattro and the 2015-2021 Volkswagen Golf-R with the 2.0L Turbo engine and features a fully integrated and functional front ram air system with dual inlets. Unlike the factory scoop that some "performance" companies retain, the Injen EVO3005 has a redesigned ram air section that utilizes booth inlets for maximum airflow. Every EVO3005 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 16 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1128-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Spool up the power of your Volkswagen Golf MK7 TDi 2.0L with the EVO3004 Evolution Cold Air Intake System by Injen Technology. The EVO3004 is specifically engineered for the Volkswagen Golf MK7 2.0L Turbo Diesel and features a fully integrated and functional front ram air system with dual inlets. Unlike the factory scoop that some "performance"companies retain, the Injen EVO3004 has a redesigned ram air section that utilizes booth inlets for maximum airflow. Every EVO3004 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box; The EVO3004 Cold Air Intake system features our 2-piece box design that incorporates our boost plenum, our fully integrated ram air scoop with functioning dual inlets, and a massive 360? SuperNano-Web dry air filter. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house and those results are published for anyone to see. , , Roto-molded Housing w/ integrated Ram Air Scoop; The EVO3004 system features our 2-piece box design that incorporates our boost plenum. The box is molded into our fully functional ram air scoop with dual front inlets to capture the maximum amount of cool air to feed that hungry turbo. , , Roto-molded Intake Tube; The EVO3004 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 24 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1128-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Made in Pomona, California USA

This Part Fits:

Give your MK7 Audi/Volkswagen that added punch you crave with the EVO3003 Evolution Cold Air Intake System by Injen Technology. The EVO3003 is specifically engineered for the Audi/Volkswagen MK7 with the 1.8L/2.0L engine and features a fully integrated and functional front ram air system with dual inlets. Unlike the factory scoop that some "performance" companies retain, the Injen EVO3003 has a redesigned ram air section that utilizes booth inlets for maximum airflow. Every EVO3003 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 24 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1128-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

XLPE Roto-molded Intake Tube: The EVO2300 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The specially tapered tube starts out at a huge 5 inches and slowly tapers down to 3.5 inches to ensure massive airflow at the turbo inlet. We have also incorporated our internal MegaRam (MR) technology for safe and effective power gains. Our intake tube also incorporates a custom CNC-Machined mounting flange that imitates the stock attachment method. This positive attachment method ensures that your intake remains securely attached to the turbo without fear of it slipping off like our competitor's rubber couplers.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Custom CNC machined adapter imitates how the stock tube attaches to turbo, thus preventing rubber couplers from popping off like our competition
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Specially designed intake tube that transitions from 5in OD to 3.5in to increase airflow velocity at the turbo inlet
• Custom Heatshield in front of the turbo protects the intake from excessive heat soak
• Aggressive under hood appearance while maintaining an OE fit
• Features Injen?s patented internal MegaRam (MR) Technology
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 18 hp and 26 lb.-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1118BLK
• Replacement air filter # X-1093-BB
• Made in Pomona California, USA

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO2202C for the Toyota 4Runner and FJ Cruiser V6 4.0L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System to securely attach a massive 8-layer Oiled Cotton Gauze air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the 8-Layer Oiled Cotton Gauze air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2202C housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Integrated Ram Air Scoop; The EVO2202C comes complete with our integrated fully functional ram air scoop. The included Urethane Plug can be installed when you're taking on the toughest terrain to ensure your engine doesn't come into contact with harmful debris or water. This scoop feeds that hungry V6 with cool, fresh air for maximum performance!, , Roto-molded Intake Tube; The EVO2202C Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen Clear-Vue Window allows you to check the condition of your air filter without the need to remove it.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Included Urethane Plug to seal ram air scoop in off-road wet conditions
• Ram air scoop is designed to capture the largest amount of cool air
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Fits in factory mounting locations for simple installation
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 13 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO2202 for the Toyota 4Runner and FJ Cruiser V6 4.0L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box; Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2202 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Integrated Ram Air Scoop; The EVO2202 comes complete with our integrated fully functional ram air scoop. The included Urethane Plug can be installed when you're taking on the toughest terrain to ensure your engine doesn't come into contact with harmful debris or water. This scoop feeds that hungry V6 with cool, fresh air for maximum performance when you need it most!, , Roto-molded Intake Tube; The EVO2202 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen Clear-Vue Window allows you to check the condition of your air filter without the need to remove it.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Included Urethane Plug to seal ram air scoop in off-road wet conditions
• Ram air scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Fits in factory mounting locations for simple installation
• Dyno Proven gains of up to 13 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Designed and Built in Pomona California, USA
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK

This Part Fits:

Step into the world of performance with Injen Technology?s brand-new Evolution Elite air intake system, designed just for the 2024-2026 Toyota Tacoma L4 2.4L Turbo. Our R&D team poured everything into the EVO2201, using advanced CAD and CFD tech to create something that stands out for style, fit, and pure performance. The kit comes with a tough, in-house roto-molded XLPE air box and intake tube, packed with patented features that push the boundaries of what an intake system can do. At the heart of it, our famous SuperNano-Web dry air filter catches even the tiniest contaminants. Everything fits together with premium, automotive-grade hardware, so you get a rock-solid install every time. Honestly, once you try this intake, you?ll never look back. This is the Evolution Elite.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented removable magnetic lid can transform intake into an open element system
• Provides power gains while maintaining A/F ratios with no additional tuning
• Integrated air scoop is designed to capture the largest amount of cool air
• High strength, Cross-Link Polyethylene (XLPE) roto-molded construction
• Patented built-in velocity stack for a smoother, accelerated air flow
• Patented magnetic see-through window that eases in filter monitoring
• Meticulously engineered using advanced CAD and CFD technology
• Dyno Proven gains of up to 15 whp and 19 lb-ft of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1046-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1053BLK
• Does NOT fit i-Force Max hybrid models
• Available in multiple finish options
• Made in Pomona California, USA

This Part Fits:

Step into the world of performance with Injen Technology?s brand-new Evolution Elite air intake system, designed just for the 2024-2026 Toyota Tacoma L4 2.4L Turbo. Our R&D team poured everything into the EVO2201, using advanced CAD and CFD tech to create something that stands out for style, fit, and pure performance. The kit comes with a tough, in-house roto-molded XLPE air box and intake tube, packed with patented features that push the boundaries of what an intake system can do. At the heart of it, our famous SuperNano-Web dry air filter catches even the tiniest contaminants. Everything fits together with premium, automotive-grade hardware, so you get a rock-solid install every time. Honestly, once you try this intake, you?ll never look back. This is the Evolution Elite.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented removable magnetic lid can transform intake into an open element system
• Provides power gains while maintaining A/F ratios with no additional tuning
• Integrated air scoop is designed to capture the largest amount of cool air
• High strength, Cross-Link Polyethylene (XLPE) roto-molded construction
• Patented built-in velocity stack for a smoother, accelerated air flow
• Patented magnetic see-through window that eases in filter monitoring
• Meticulously engineered using advanced CAD and CFD technology
• Dyno Proven gains of up to 15 whp and 19 lb-ft of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1046-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1053BLK
• Does NOT fit i-Force Max hybrid models
• Available in multiple finish options
• Made in Pomona California, USA

This Part Fits:

Step into the world of performance with Injen Technology?s brand-new Evolution Elite air intake system, designed just for the 2024-2026 Toyota Tacoma L4 2.4L Turbo. Our R&D team poured everything into the EVO2201, using advanced CAD and CFD tech to create something that stands out for style, fit, and pure performance. The kit comes with a tough, in-house roto-molded XLPE air box and intake tube, packed with patented features that push the boundaries of what an intake system can do. At the heart of it, our famous SuperNano-Web dry air filter catches even the tiniest contaminants. Everything fits together with premium, automotive-grade hardware, so you get a rock-solid install every time. Honestly, once you try this intake, you?ll never look back. This is the Evolution Elite.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented removable magnetic lid can transform intake into an open element system
• Provides power gains while maintaining A/F ratios with no additional tuning
• Integrated air scoop is designed to capture the largest amount of cool air
• High strength, Cross-Link Polyethylene (XLPE) roto-molded construction
• Patented built-in velocity stack for a smoother, accelerated air flow
• Patented magnetic see-through window that eases in filter monitoring
• Meticulously engineered using advanced CAD and CFD technology
• Dyno Proven gains of up to 15 whp and 19 lb-ft of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1046-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1053BLK
• Does NOT fit i-Force Max hybrid models
• Available in multiple finish options
• Made in Pomona California, USA

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO2200C for the Toyota Tacoma V6 3.5L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive 8-layer cotton gauze air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the 8-layer cotton gauze air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2200C housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Front Mounted Ram Air Scoop; The EVO2200C comes complete with our fully functional ram air scoop. This scoop feeds that hungry V6 with cool, fresh air for maximum performance!, , Roto-molded Intake Tube; The EVO2200C Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen inspection badge allows you to check the condition of your air filter
• Twist-Lock Technology to securely integrate the air filter to the housing
• Ram air scoop is designed to capture the largest amount of cool air
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 17 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BR
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Patent Pending

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO2200 for the Toyota Tacoma V6 3.5L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2200 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Front Mounted Ram Air Scoop; The EVO2200 comes complete with our fully functional ram air scoop. This scoop feeds that hungry V6 with cool, fresh air for maximum performance!, , Roto-molded Intake Tube; The EVO2200 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen inspection badge allows you to check the condition of your air filter
• Twist-Lock Technology to securely integrate the air filter to the housing
• Ram air scoop is designed to capture the largest amount of cool air
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 17 hp and 15 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Durable Roto-Molded Polyethylene construction
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona, California USA
• Patent Pending

This Part Fits:

8-Layer Oiled Cotton Gauze Air Filter: The Injen 8-Layer oil cotton gauze air filter is included with the EVO2100C cold air intake. This filter is uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter available for this application, which enhances the air volume - resulting in increased power gains while making this installation process quick and easy. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Keep it simple! Every Injen Evolution Cold Air intake that uses our Twist-Lock System has been strategically designed to utilize fewer parts and tools to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven: Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO2100C clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 14 additional horsepower and 13 Ft.-lbs. of torque, Injen is proud to say that the EVO2100C Evolution Cold Air Intake system is the very best intake system for your Toyota Tundra that money can buy.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BR
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona California, USA
• Injen Inspection Badge

This Part Fits: