Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
673 products
673 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$376.90
SuperNano-Web Dry Air Filter: The Injen SuperNano-Web Dry air filter is included with the EVO2100 cold air intake. This filter is uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter available for this application, which enhances the air volume - resulting in increased power gains while making this installation process quick and easy. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Keep it simple! Every Injen Evolution Cold Air intake that uses our Twist-Lock System has been strategically designed to utilize fewer parts and tools to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven: Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO2100 clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 14 additional horsepower and 13 Ft.-lbs.of torque, Injen is proud to say that the EVO2100 Evolution Cold Air Intake system is the very best intake system for your Toyota Tundra that money can buy.
Installation InstructionsInstallation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
- Durable Roto-Molded Polyethylene housing and intake tube
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1107-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1119BLK
- Made in Pomona California, USA
- Injen Inspection Badge
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2010-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2007-2011,2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
$382.15
Roto-molded Intake Tube: The EVO2001 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO2001 cold air intake system. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO2001 clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 15 additional horsepower and 11 Ft.-lbs. of torque, Injen is proud to say that the EVO2001 Evolution Cold Air Intake system is the very best intake system for your Nissan/Infiniti that money can buy.
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop is designed to capture the largest amount of cool air
- Aggressive underHood appearance while maintaining an OE fit
- Optional Rain Guard sold separately part number EVO2000RG
- Dyno Proven gains of up to 15 hp and 11 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene Construction
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1131-BB
- Designed to work with the stock calibration
- Stainless Steel Hardware/Clamps And Screws
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2016 | Scion | FR-S | Base |
| 2013-2020 | Subaru | BRZ | Limited |
| 2013-2019 | Subaru | BRZ | Premium |
| 2015 | Subaru | BRZ | Series.Blue |
| 2019 | Subaru | BRZ | Series.Gray |
| 2016 | Subaru | BRZ | Series.HyperBlue |
| 2017 | Subaru | BRZ | Series.Yellow |
| 2018,2020 | Subaru | BRZ | TS |
| 2017-2020 | Toyota | 86 | Base |
| 2018-2020 | Toyota | 86 | GT |
| 2020 | Toyota | 86 | Hakone Edition |
| 2017 | Toyota | 86 | Special Edition |
| 2019 | Toyota | 86 | TRD Special Edition |
$43.00
You've decided on the very best intake system on the market for your Subaru BR-Z / Toyota FR-S / Toyota GT-86 platform by purchasing the Injen EVO2001 intake system, but now you have concerns about the ram air scoop during heavy rainfall. Well my friend, fear no more. Injen has developed this rain shield to help prevent rain water from directly entering your intake system under normal driving situations. Please note that this rain guard does not make your vehicle a submarine, so please use caution when driving in rainy situations. This EVO2000RG air intake rain guard is designed specifically for use with the Injen intake system Part No. EVO2001. Our rain guard is designed to deliver trouble free and consistent performance. Made from high-quality materials for ultimate durability. Manufactured in the USA and engineered to meet or exceed strict quality requirements. IMPORTANT NOTICE; The EVO2000RG is an accessory that requires our EVO2001 cold air intake system to function properly. The EVO2001 was designed specifically for the BR-Z / FR-S / GT-86 and is one of the top selling intakes on the market!
Installation InstructionsInstallation Instructions
- The EVO2000RG rain guard is designed to deliver trouble free and consistent performance.
- Manufactured Up To Meet Or Exceed Strict Quality Requirements
- Made from high-quality materials for ultimate durability.
- Must be used with Injen's EVO2001 Cold Air Intake
- Provides extra protection in heavy rainfall
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2016 | Scion | FR-S | Base |
| 2013-2020 | Subaru | BRZ | Limited |
| 2013-2019 | Subaru | BRZ | Premium |
| 2015 | Subaru | BRZ | Series.Blue |
| 2019 | Subaru | BRZ | Series.Gray |
| 2016 | Subaru | BRZ | Series.HyperBlue |
| 2017 | Subaru | BRZ | Series.Yellow |
| 2018,2020 | Subaru | BRZ | TS |
| 2017-2020 | Toyota | 86 | Base |
| 2018-2020 | Toyota | 86 | GT |
| 2020 | Toyota | 86 | Hakone Edition |
| 2017 | Toyota | 86 | Special Edition |
| 2019 | Toyota | 86 | TRD Special Edition |
$347.50
Crank up the performance of your Nissan/Infiniti SUV with Injen's all-new EVO1901 Evolution sealed cold air intake system. The EVO1901 was designed specifically for the 2012-13 Infiniti QX56, the 2014-2023 Infiniti QX80, and the 2017-2023 Nissan Armada all with the powerful 5.6L V8 engine. The EVO1901 cold air intake was designed using advanced engineering tools to offer a top quality kit that has no parallel. The EVO1901 one-piece sealed housing utilizes our patent pending Twist-Lock technology to securely fasten our SuperNano-Web Dry air filter in place. Injen has put it all on the table to give you the greatest intake system possible!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO1901 housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO1901 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 13 hp and 17 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Injen Clear-View badge for simple air filter inspection
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1107-BB
- Designed to work with the stock calibration
- Stainless Steel Hardware/Clamps And Screws
- Injen Technology Limited Lifetime Warranty
- Aggressive intake growl under acceleration
- Optional hydroshield part number 1119BLK
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2013 | INFINITI | QX56 | Base |
| 2014-2018 | INFINITI | QX80 | Base |
| 2016-2017,2019-2020 | INFINITI | QX80 | Limited |
| 2019-2023 | INFINITI | QX80 | Luxe |
| 2021-2023 | INFINITI | QX80 | Premium Select |
| 2021-2023 | INFINITI | QX80 | Sensory |
| 2021-2023 | Nissan | Armada | Midnight Edition |
| 2017-2023 | Nissan | Armada | Platinum |
| 2018-2020 | Nissan | Armada | Platinum Reserve |
| 2021-2023 | Nissan | Armada | S |
| 2017-2023 | Nissan | Armada | SL |
| 2017-2023 | Nissan | Armada | SV |
$376.90
Give your Mitsubishi Lancer Evolution X that added punch you crave with the EVO1801 Evolution Cold Air Intake System by Injen Technology. The EVO1801 is specifically engineered for the 2008-2015 Mitsubishi Lancer Evolution X with the 2.0L turbo engine. Every EVO1801 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box; The EVO1801 intake tube was precisely tested and tuned on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The Mitsubishi Lancer Evolution X ECU is very sensitive to modifications and will not accept most aftermarket intake kits without the use of an additional and costly tuner. This is not the case with the Injen Evolution cold air intake. Our intake tube incorporates our patented our patented MR technology to provide safe and reliable fuel trim levels, all without the use of an aftermarket tuner; The EVO1801 Cold Air Intake system features our 2-piece box design that incorporates our boost plenum, our fully integrated ram air scoop, and a massive 360? SuperNano-Web dry air filter. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house and those results are published for anyone to see. , , Roto-molded Housing and Ram Air Scoop; The EVO1801 system features our 2-piece box design that incorporates our boost plenum. The box is molded into our fully functional ram air scoop to capture the maximum amount of cool air to feed that hungry turbo. , ,
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop is designed to capture the largest amount of cool air
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 35 hp and 30 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional Rain Guard sold separately - P/N: EVO1800RG
- Durable Roto-Molded Polyethylene housing and scoop
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1128-BB
- Designed to work with the stock calibration
- Stainless Steel Hardware/Clamps And Screws
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015 | Mitsubishi | Lancer | Evolution Final Edition |
| 2008,2010-2015 | Mitsubishi | Lancer | Evolution GSR |
| 2008,2010-2015 | Mitsubishi | Lancer | Evolution MR |
| 2010-2011 | Mitsubishi | Lancer | Evolution MR Touring |
| 2010 | Mitsubishi | Lancer | Evolution SE |
| 2009-2015 | Mitsubishi | Lancer | Ralliart |
| 2010-2011 | Mitsubishi | Lancer | Ralliart Sportback |
$551.20
When you're out on the trails, you need your Jeep to be durable and dependable, ensuring that you and your Jeep make it home every time. Keep that in mind while reviewing the competitors snorkels and the materials used to manufacture them. Some of our competitors use an inferior HDPE linear polyethylene or even a weaker LLDPE to mold their snorkels. HDPE is cheap for manufacturing but doesn't come close to the strength and durability of the XLPE polyethylene that Injen uses. XLPE has 20 times the environmental stress crack resistance of HDPE, 10 times the molecular weight of HDPE, and 5 times the impact and tensile strength of HDPE. In other words, Injen's Evolution intake systems are built tough and designed to get you anywhere you want to go. Period!
Installation Instructions- Elevated air inlet location keeps fresh, clean air feeding your engine, even in the dustiest of conditions
- Manufactured from high grade XLPE cross-linked polyethylene for the ultimate in durability
- Must be used with one of the following Injen intake systems (Model & Engine dependent):
- Proper installation helps prevents water incursion during high-water crossings
- Effectively moves the air intake inlet to the roof line of your Jeep
- Two Piece design eases installation and provides a custom look
- Use our EVO5005 (Dry Filter) or EVO5005C (Oiled Cotton Filter)
- Use our EVO5006 (Dry Filter) or EVO5006C (oiled Cotton Filter)
- Does not work with OE or other aftermarket Intake Systems
- No tuning required; simply install and enjoy the trails!
- Easy Installation; Minor hood modification is required
- Aggressive intake growl under spirited acceleration
- Works seamlessly with most light bar systems
- Injen Technology Limited Lifetime Warranty
- 2018-2023 Jeep Wrangler JL V6-3.6L Hybrid
- 2020-2023 Jeep Gladiator JT V6-3.6L
- 2018-2023 Jeep Wrangler JL V6-3.6L
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$434.65
The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO15070 snorkel is specifically engineered for use with our EVO5007 or EVO5008 Jeep Wrangler intake systems. The EVO15070 is a functioning snorkel that bolts directly to our intake box for a tough and rugged look. If you need to move the air inlet up for extremely dusty or high water situations, then this is the perfect addition to our intake system. Fully modular and interchangeable with our EVO15069 Ram Air scoop, the EVO15070 is the only snorkel unit that you can count on for your Jeep! Every EVO15070 Ram Air scoop is made in the USA from cross linked high density polyethylene for extreme durability. The installation process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. The EVO15070 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque (when used with our EVO5007 or EVO5008 intake kits). This fully modular system was carefully designed utilizing the latest in CMM Laser Scanning hardware - SolidWorks 3D CAD Software ? and finally prototype tested after being printed on one of our state of the art 3D printers ? and this is all before ever being released for production! Our engineers were meticulous with every detail and that attention detail provides an unmatched fit and superior power numbers. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house. The Evolution can't be stopped?.. IMPORTANT NOTICE; The EVO15070 Snorkel is an accessory that requires our EVO5007 and EVO5008 modular intake systems to function properly. The EVO5007 and EVO5008 were designed specifically for the 2007-2018 Jeep Wrangler JK's.
Installation InstructionsInstallation Instructions
- Durable Roto-Molded Polyethylene housing with a stylish stainless steel mesh screen
- Must be used with Injen's EVO5007 or EVO5008 modular intake system
- Hood modification is required to complete the installation
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Install w/EVO5003 Intake System
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$193.15
The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO15069 Ram Air scoop is specifically engineered for use with our EVO5007 or EVO5008 Jeep Wrangler intake systems. The EVO15069 is a functioning ram air scoop that bolts directly to our intake box. If you need that extra bit of cool air for all-out performance, then this is the perfect addition to our intake system. Fully modular and interchangeable with our EVO15070 snorkel, the EVO15069 Ram Air scoop is the only ram air unit you can count on for your Jeep! Every EVO15069 Ram Air scoop is made in the USA from cross linked high density polyethylene for extreme durability. The installation process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. The EVO15069 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque (when used with our EVO5007 or EVO5008 intake kits). This fully modular system was carefully designed utilizing the latest in CMM Laser Scanning hardware - SolidWorks 3D CAD Software ? and finally prototype tested after being printed on one of our state of the art 3D printers ? and this is all before ever being released for production! Our engineers were meticulous with every detail and that attention detail provides an unmatched fit and superior power numbers. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house. The Evolution can't be stopped?.. IMPORTANT NOTICE; The EVO15069 Ram Air Scoop is an accessory that requires our EVO5007 and EVO5008 modular intake systems to function properly. The EVO5007 and EVO5008 were designed specifically for the 2007-2018 Jeep Wrangler JK's.
Installation InstructionsInstallation Instructions
- Durable Roto-Molded Polyethylene housing with a stylish stainless steel mesh screen
- Must be used with Injen's EVO5007 or EVO5008 modual intake system
- Hood modifiaction is required to complete the installation
- Installs w/EVO5003 Intake System Sold Separately
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$393.70
Boost up the performance of your 2017-2021 Honda Civic Type R (FK8) with Injen's all-new EVO1502 Evolution sealed cold air intake system. The EVO1502 cold air intake was designed using advanced engineering tools to offer a top quality kit that has no parallel. The EVO1502 one-piece sealed housing utilizes our patent pending Twist-Lock technology to securely fasten our SuperNano-Web Dry air filter in place. The housing also has a molded scoop to retain the factory inlet. This inlet helps direct cool, dense air into the intake system for maximum power! Injen has put it all on the table to give you the greatest intake system possible!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO1502 housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO1502 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,
Installation InstructionsInstallation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Twist-Lock Technology to securely integrate the air filter to the housing
- Aggressive underHood appearance while maintaining an OE fit
- Aggressive Under Hood Appearance While Maintaining OE Fit
- Dyno Proven gains of up to 13 hp and 18 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1115-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | Type R |
$366.40
SuperNano-Web Dry Air Filter: The Injen SuperNano-Web Dry air filter is included with the EVO1501 cold air intake. This filter is uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter available for this application, which enhances the air volume - resulting in increased power gains while making this installation process quick and easy. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Keep it simple! Every Injen Evolution Cold Air intake that uses our Twist-Lock System has been strategically designed to utilize fewer parts and tools to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven: Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO1501 clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 13 additional horsepower and 12 Ft.-lbs.of torque, Injen is proud to say that the EVO1501 Evolution Cold Air Intake system is the very best intake system for your Civic Si that money can buy.
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Twist-Lock Technology to securely integrate the air filter to the housing
- Aggressive underHood appearance while maintaining an OE fit
- Aggressive Under Hood Appearance While Maintaining OE Fit
- Dyno Proven gains of up to 22 hp and 18 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1110-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Honda | Civic | Si |
$347.50
SuperNano-Web Dry Air Filter: The SuperNano-Web Dry air filter that is included in the EVO1500. Has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter feasible for this application, which enhances the available air volume - resulting in added power while retaining an installation process that is quick and uncomplicated. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Keep it simple! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to utilize fewer parts to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Well, Injen has put in the time and perseverance to stand behind our performance data. We put in countless hours of testing to prove that we have developed a top-notch kit. With all those hours of designing and dyno testing, Injen is proud to say that the EVO1500 Evolution Air Intake system puts down numbers of up to 13 additional horsepower and 12 Ft.-lbs. of torque.
Installation Instructions- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Twist-Lock Technology to securely integrate the air filter to the housing
- Aggressive underHood appearance while maintaining an OE fit
- Aggressive Under Hood Appearance While Maintaining OE Fit
- Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1110-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | EX |
| 2016-2021 | Honda | Civic | EX-L |
| 2016-2018 | Honda | Civic | EX-T |
| 2017-2021 | Honda | Civic | LX |
| 2017-2020 | Honda | Civic | Si |
| 2017-2021 | Honda | Civic | Sport |
| 2017-2021 | Honda | Civic | Sport Touring |
| 2016-2021 | Honda | Civic | Touring |
$422.05
SuperNano-Web Dry Air Filter: 'That's massive!' is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1301 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple.
DatasheetInstallation Instructions
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop integration is designed to capture the largest amount of cool air for max performance
- Replacement air filter part number X-1108-BB (Dry) or X-1108-BR (Oiled Cotton)
- Simple drop-in installation can normally be completed within 20 minutes
- Air Filter attaches to the airbox using our patented TwistLok method
- Box seamlessly adapts to the OE inlet scoop without modification
- Fully serviceable 4.00" I.D. Injen SuperNano-Web dry air filter
- Manufactured from high-strength XLPE Roto-Molded Polyethylene
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | Hyundai | Veloster | Turbo |
| 2019-2021 | Hyundai | Veloster | Turbo R-Spec |
| 2019-2021 | Hyundai | Veloster | Turbo Ultimate |
$463.00
Roto-molded Housing and Ram Air Scoop: The EVO1206 system features our 2-piece box design that incorporates our boost plenum. The box attaches to our fully incorporated ram air scoop to capture the maximum amount of cool air to feed that hungry turbo. , , 6061 Aluminum Intake Tube: The EVO1206 Evolution Air Intake System uses a custom designed and dyno-tuned, aluminum intake tube that utilizes our patented air fusion and MR technology to produce huge power gains while retaining an OE quality fit and safe fuel trim levels. SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1206 cold air intake system. This filter has been uniquely designed to work with the downward facing orientation to ensure a leak-proof seal. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. , , Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Subaru. After hours of designing and dyno teWRX STIng, Injen is proud to say that the EVO1206 Evolution Air Intake system puts down numbers of up to 26 additional horsepower and 34 Ft.-lbs. of torque.
Installation InstructionsTechnical Drawing
Installation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop is designed to capture the largest amount of cool air
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 26 hp and 34 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene housing and scoop
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1076BLK
- Increased Torque Up To 34 ft./lbs.
- Replacement air filter # X-1070-BB
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Subaru | WRX STI | Base |
| 2015 | Subaru | WRX STI | Launch Edition |
| 2015-2017 | Subaru | WRX STI | Limited |
| 2016 | Subaru | WRX STI | Series.HyperBlue |
$386.35
Roto-molded Housing: The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO1200 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Front Mounted Ram Air Scoop: SuperNano-Web Dry Air Filter: "OMG that's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included in the EVO1200. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock system has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware: Stainless steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit and easy installation. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today.Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a top-notch kit. After hours of designing and dyno testing, Injen is proud to say that the EVO1200 Evolution Air Intake system puts down numbers of up to 7 additional horsepower and 8 lb-ft. of torque.
DatasheetInstallation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Patented Twist-Lock Air Filter used to securely integrate the air filter to the housing
- Injen Clear-Vue Window allows you to check the condition of your air filter easily
- Ram air scoop is designed to capture the largest amount of cool air
- Aggressive under hood appearance while maintaining an OE fit
- Stainless steel band clamps with inner protective liner
- Dyno Proven gains of up to 7 hp and 8 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene construction
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1112-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2021 | Subaru | WRX | Base |
| 2015-2021 | Subaru | WRX | Limited |
| 2015-2021 | Subaru | WRX | Premium |
$404.20
You finally have your 2020-2025 BMW G20 3-Series equipped with the Turbo B58 and Turbo Hybrid B58 engine and now the next logical step in your search for power gains is with Injen Technology. The EVO1108 is specifically designed for a drop-in fit in your BMW, including the seamless fitment into the factory air scoop. This easy to install performance cold air intake system allows that hungry Turbo engine to breathe deeper and unleash that additional performance that you've been craving. It truly is a win on all levels.
Installation InstructionsDatasheet
- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop integration is designed to capture the largest amount of cool air for max performance
- Simple drop-in installation can normally be completed within 20 minutes
- Air Filter attaches to the airbox using our patented TwistLock method
- Box seamlessly adapts to the OE inlet scoop without modification
- Fully serviceable 5.00" I.D. Injen SuperNano-Web dry air filter
- Manufactured from high-strength XLPE Roto-Molded Polyethylene
- Dynamic under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 13 hp and 11 lb-ft. of torque
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1093-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | BMW | M240i | Base |
| 2022-2025 | BMW | M240i xDrive | Base |
| 2020-2024 | BMW | M340i | Base |
| 2020-2024 | BMW | M340i xDrive | Base |
| 2021-2025 | BMW | M440i | Base |
| 2022-2025 | BMW | M440i Gran Coupe | Base |
| 2021-2025 | BMW | M440i xDrive | Base |
| 2022-2025 | BMW | M440i xDrive Gran Coupe | Base |
$411.55
SuperNano-Web Dry Air Filter: "That's massive!" is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1107 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple.
DatasheetInstallation Instructions
- NOTE: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop integration is designed to capture the largest amount of cool air for max performance
- Replacement air filter part number X-1134-BB (Dry) or X-1134-BR (Oiled Cotton)
- Can be used with our PT0008 Throttle Response controller for improved response
- Simple drop-in installation can normally be completed within 20 minutes
- Air Filter attaches to the airbox using our patented TwistLok method
- Box seamlessly adapts to the OE inlet scoop without modification
- Manufactured from high-strength XLPE Roto-Molded Polyethylene
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 21 hp and 18 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- Aggressive intake growl under acceleration
- Does NOT fit the 2013 M135i E82 chassis.
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2015 | BMW | 335i | Base |
| 2014-2016 | BMW | 335i GT xDrive | Base |
| 2012-2015 | BMW | 335i xDrive | Base |
| 2014-2016 | BMW | 435i | Base |
| 2015-2016 | BMW | 435i Gran Coupe | Base |
| 2014-2016 | BMW | 435i xDrive | Base |
| 2015-2016 | BMW | 435i xDrive Gran Coupe | Base |
| 2016-2018 | BMW | M2 | Base |
| 2014-2016 | BMW | M235i | Base |
| 2015-2016 | BMW | M235i xDrive | Base |
$347.50
Take the ultimate driving experience of your 2001-2006 BMW M3 (E46) with the L6-3.2L engine to the next level of excitement with Injen's EVO1106 Evolution cold air intake system. The Injen EVO1106 has the cleanest installation on the market that seamless adapts to the OE scoop. Add to that the highest dyno-proven gains at a price point that makes sense ? the EVO1106 is a win on all levels. , , The Injen EVO1106 cold air intake system for the E46 M3 is truly on the next level. From the one-piece sealed housing that utilizes our patent pending Twist-Lock technology to securely attach a massive SuperNano-Web Dry air filter in place, to the seamless fitment to the OE inlet scoop, all the way down to premium hardware, Injen has put it all on the board to provide you, the consumer, the best intake possible for your BMW E46 M3!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO1106 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Roto-molded Intake Tube; The EVO1106 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit., ,
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop integration is designed to capture the largest amount of cool air for max performance
- Can be used with our PT0008 Throttle Response controller for improved response
- Simple drop-in installation can normally be completed within 20 minutes
- Box seamlessly adapts to the OE inlet scoop without modification
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 14 hp and 10 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1107-BB
- Designed to work with the stock calibration
- Stainless Steel Hardware/Clamps And Screws
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1119BLK
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2001-2006 | BMW | M3 | Base |
$405.25
SuperNano-Web Dry Air Filter; "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1105 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware; From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation; Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven; Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your BMW. So after hours of designing and dyno testing, Injen is proud to say that the EVO1105 Evolution Air Intake system puts down numbers of up to 13 additional horsepower and 18 lb-Ft. of torque.
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Aggressive under hood appearance while maintaining an OE fit
- Aggressive Under Hood Appearance While Maintaining OE Fit
- Dyno Proven gains of up to 13 hp and 18 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1112-BB
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | BMW | 340i | Base |
| 2017-2019 | BMW | 340i GT xDrive | Base |
| 2016-2018 | BMW | 340i xDrive | Base |
| 2017-2020 | BMW | 440i | Base |
| 2017-2020 | BMW | 440i Gran Coupe | Base |
| 2017-2020 | BMW | 440i xDrive | Base |
| 2017-2020 | BMW | 440i xDrive Gran Coupe | Base |
| 2017-2021 | BMW | M240i | Base |
| 2017-2021 | BMW | M240i xDrive | Base |
$405.25
SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1104 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your BMW. So after hours of designing and dyno testing, Injen is proud to say that the EVO1104 Evolution Air Intake system puts down numbers of up to 7 additional horsepower and 7 Ft.-lbs. of torque.
Installation InstructionsInstallation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Aggressive underHood appearance while maintaining an OE fit
- Aggressive Under Hood Appearance While Maintaining OE Fit
- Stainless steel band clamps with inner protective liner
- Dyno Proven gains of up to 7 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1112-BB
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | BMW | 230i | Base |
| 2017-2021 | BMW | 230i xDrive | Base |
| 2017-2018 | BMW | 330i | Base |
| 2017-2018 | BMW | 330i GT xDrive | Base |
| 2017-2018 | BMW | 330i xDrive | Base |
| 2017-2020 | BMW | 430i | Base |
| 2017-2020 | BMW | 430i Gran Coupe | Base |
| 2017-2020 | BMW | 430i xDrive | Base |
| 2017-2020 | BMW | 430i xDrive Gran Coupe | Base |
$439.90
Injen is proud to introduce the all new Evolution (EVO) sealed cold air intake system for the 2012-2016 BMW 3-Series! The EVO1103 cold air intake has been designed using state of the art engineering tools and techniques to produce the next generation intake system. This intake system is on a whole new level. The large housing not only provides beauty under the hood, but it encloses an impressive Injen SuperNano-Web dry air filter to provide both killer air flow and added performance. Let's all be honest, Injen likes to keep things cool, so the air filter is located in the best possible position of the engine bay helping to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures to some of the coolest ones available. This Injen EVO intake kit includes everything that is required for a direct-fit installation. To top it all off, just like all other Injen air intake systems, this EVO Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty, making sure all your Injen parts are performing perfectly, as long as you own them!, , Roto-molded Housing; The two-piece housing utilizes the Injen inspection badge allowing for easy visual inspection of the air filter, along with adding a hint of style with white on red Injen logo. The entire housing was developed in 3D and ensures a hassle-free installation. Roto-molded Intake Tube; This Evolution Air Intake System uses a custom designed and dyno-tuned intake tube to produce impressive power gains while retaining proper fuel trims eliminating check engine lights., ,
Installation Instructions- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 15 hp and 17 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- Aggressive intake growl under acceleration
- Replacement air filter # X-1105-BB
- Made in Pomona, California USA
- Midnight Edition Injen Badge
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2016 | BMW | 228i | Base |
| 2015-2016 | BMW | 228i xDrive | Base |
| 2013-2018 | BMW | 320i | Base |
| 2013-2018 | BMW | 320i xDrive | Base |
| 2012-2016 | BMW | 328i | Base |
| 2015-2016 | BMW | 328i GT xDrive | Base |
| 2013-2016 | BMW | 328i xDrive | Base |
| 2014-2016 | BMW | 428i | Base |
| 2015-2016 | BMW | 428i Gran Coupe | Base |
| 2014-2016 | BMW | 428i xDrive | Base |
| 2015-2016 | BMW | 428i xDrive Gran Coupe | Base |
$810.55
Injen is proud to be introducing the all new Evolution sealed cold air intake system for the 2015-2020 BMW M3/M4 ans 2019-2021 M2 Compeition! This intake has been designed using the some of the most up-to-date engineering tools and techniques to produce a top notch kit. This intake system is on a whole new level with one-piece sealed housings that utilize the all new Injen Twist-lock System (Patent Pending) to securely attach the Injen SuperNano-Web Dry air filters in place. This cold air intake also has our distinctive sight window that not only allows easy inspection of the air filters, but it really pops under your hood too. This kit ships complete with premium hardware to provide you the absolute best intake kit available for your BMW M3 and M4.
DatasheetInstallation Instructions
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Twist-Lock Technology to securely integrate the air filter to the housing
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 22 hp and 27 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tubes and housings
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Larger Inlet Air Scoop And Induction Tube
- Replacement air filter # X-1097-BB
- Made in Pomona, California USA
- Patent Pending
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | BMW | M2 | Competition |
| 2015-2018 | BMW | M3 | Base |
| 2015-2020 | BMW | M4 | Base |
| 2019-2020 | BMW | M4 | CS |
| 2016 | BMW | M4 | GTS |
$30.56
Injen Technology's Hydroshield are designed to enhance the efficiency of any air filter, including Injen's SuperNano-Web and our 8-Layer oiled cotton gauze air filters. Injen's Hydroshield is constructed from a proprietary base media and then treated with a hydrophobic water-repellent. Our Hydroshield is UV resistant, can stop contaminants down to.005", is puncture resistant, and has elasticity characteristics which helps the Hydroshield to return to the original shape/position after servicing. , Injen's Hydroshields are engineered to divert damaging contaminants, which can clog your air filter and compromise peak air-flow and horsepower output. Injen's Hydroshield also extends the time between servicing intervals, reducing costs and improving the overall user experience.
- Hydrophobic treatment to help repel water (does not make your filter water proof)
- Direct fit for many Injen air filters and/or universal applications
- Shielding the filter from contaminants resulting in more power
- Average Dimension of 7.00"Base x 7.00"Tall x 5.0"Top
- Designed for use on closed top air filters only
- Confirmed fitment on Injen X-1093 air filters
- Extends the service life of your air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
$37.63
Injen Technology's Hydroshield are designed to enhance the efficiency of any air filter, including Injen's SuperNano-Web and our 8-Layer oiled cotton gauze air filters. Injen's Hydroshield is constructed from a proprietary base media and then treated with a hydrophobic water-repellent. Our Hydroshield is UV resistant, can stop contaminants down to.005", is puncture resistant, and has elasticity characteristics which helps the Hydroshield to return to the original shape/position after servicing. , Injen's Hydroshields are engineered to divert damaging contaminants, which can clog your air filter and compromise peak air-flow and horsepower output. Injen's Hydroshield also extends the time between servicing intervals, reducing costs and improving the overall user experience.
- Hydrophobic treatment to help repel water (does not make your filter water proof)
- Direct fit for many Injen air filters and/or universal applications
- Shielding the filter from contaminants resulting in more power
- Average Dimension of 7.00"Base x 7.00"Tall x 5.0"Top
- Designed for use on closed top air filters only
- Confirmed fitment on Injen X-1093 air filters
- Extends the service life of your air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
$36.45
Injen Technology's Hydroshield are designed to enhance the efficiency of any air filter, including Injen's SuperNano-Web and our 8-Layer oiled cotton gauze air filters. Injen's Hydroshield is constructed from a proprietary base media and then treated with a hydrophobic water-repellent. Our Hydroshield is UV resistant, can stop contaminants down to.005", is puncture resistant, and has elasticity characteristics which helps the Hydroshield to return to the original shape/position after servicing. , Injen's Hydroshields are engineered to divert damaging contaminants, which can clog your air filter and compromise peak air-flow and horsepower output. Injen's Hydroshield also extends the time between servicing intervals, reducing costs and improving the overall user experience.
- Hydrophobic treatment to help repel water (does not make your filter water proof)
- Direct fit for many Injen air filters and/or universal applications
- Shielding the filter from contaminants resulting in more power
- Average Dimension of 7.00"Base x 7.00"Tall x 5.0"Top
- Designed for use on closed top air filters only
- Confirmed fitment on Injen X-1093 air filters
- Extends the service life of your air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
$32.92
Injen Technology's Hydroshield are designed to enhance the efficiency of any air filter, including Injen's SuperNano-Web and our 8-Layer oiled cotton gauze air filters. Injen's Hydroshield is constructed from a proprietary base media and then treated with a hydrophobic water-repellent. Our Hydroshield is UV resistant, can stop contaminants down to.005", is puncture resistant, and has elasticity characteristics which helps the Hydroshield to return to the original shape/position after servicing. , Injen's Hydroshields are engineered to divert damaging contaminants, which can clog your air filter and compromise peak air-flow and horsepower output. Injen's Hydroshield also extends the time between servicing intervals, reducing costs and improving the overall user experience.
- Hydrophobic treatment to help repel water (does not make your filter water proof)
- Direct fit for many Injen air filters and/or universal applications
- Shielding the filter from contaminants resulting in more power
- Average Dimension of 6.0in Base x 7.00in Tall x 5.0in Top
- Confirmed fitment on Injen X-1071 air filters
- 6.00 in. Base/5.00 in. Up Top/9.125 in. Tall
- Extends the service life of your air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
- Black in color
$32.92
Injen Technology's Hydroshield are designed to enhance the efficiency of any air filter, including Injen's SuperNano-Web and our 8-Layer oiled cotton gauze air filters. Injen's Hydroshield is constructed from a proprietary base media and then treated with a hydrophobic water-repellent. Our Hydroshield is UV resistant, can stop contaminants down to.005", is puncture resistant, and has elasticity characteristics which helps the Hydroshield to return to the original shape/position after servicing. , Injen's Hydroshields are engineered to divert damaging contaminants, which can clog your air filter and compromise peak air-flow and horsepower output. Injen's Hydroshield also extends the time between servicing intervals, reducing costs and improving the overall user experience.
- Hydrophobic treatment to help repel water (does not make your filter water proof)
- Direct fit for many Injen air filters and/or universal applications
- Shielding the filter from contaminants resulting in more power
- Average Dimension of 6.0in Base x 8.5in Tall x 4.0in Top
- Confirmed fitment on Injen X-1070 air filters
- 6.00 in. Base/4.00 in. Up Top/8.50 in. Tall
- Extends the service life of your air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
- Black in color
$36.45
Injen Technology's Hydroshield are designed to enhance the efficiency of any air filter, including Injen's SuperNano-Web and our 8-Layer oiled cotton gauze air filters. Injen's Hydroshield is constructed from a proprietary base media and then treated with a hydrophobic water-repellent. Our Hydroshield is UV resistant, can stop contaminants down to.005", is puncture resistant, and has elasticity characteristics which helps the Hydroshield to return to the original shape/position after servicing. , Injen's Hydroshields are engineered to divert damaging contaminants, which can clog your air filter and compromise peak air-flow and horsepower output. Injen's Hydroshield also extends the time between servicing intervals, reducing costs and improving the overall user experience.
- Hydrophobic treatment to help repel water (does not make your filter water proof)
- Direct fit for many Injen air filters and/or universal applications
- Shielding the filter from contaminants resulting in more power
- Confirmed fitment on Injen X-1068 and X-1101 air filters
- Average Dimension of 8.50"Base x 8.5"Tall x 7.0"Top
- Extends the service life of your air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
- Fits - X-1068
$32.92
Injen Technology's Hydroshield are designed to enhance the efficiency of any air filter, including Injen's SuperNano-Web and our 8-Layer oiled cotton gauze air filters. Injen's Hydroshield is constructed from a proprietary base media and then treated with a hydrophobic water-repellent. Our Hydroshield is UV resistant, can stop contaminants down to.005", is puncture resistant, and has elasticity characteristics which helps the Hydroshield to return to the original shape/position after servicing. , Injen's Hydroshields are engineered to divert damaging contaminants, which can clog your air filter and compromise peak air-flow and horsepower output. Injen's Hydroshield also extends the time between servicing intervals, reducing costs and improving the overall user experience.
- Hydrophobic treatment to help repel water (does not make your filter water proof)
- Direct fit for many Injen air filters and/or universal applications
- Shielding the filter from contaminants resulting in more power
- Average Dimension of 6.50in Base x 6.0in Tall x 5.250in Top
- Confirmed fitment on Injen X-1051 air filters
- Extends the service life of your air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
- Black in color
- Fits - X-1051
$30.56
Injen Technology's Hydroshield are designed to enhance the efficiency of any air filter, including Injen's SuperNano-Web and our 8-Layer oiled cotton gauze air filters. Injen's Hydroshield is constructed from a proprietary base media and then treated with a hydrophobic water-repellent. Our Hydroshield is UV resistant, can stop contaminants down to.005", is puncture resistant, and has elasticity characteristics which helps the Hydroshield to return to the original shape/position after servicing. , Injen's Hydroshields are engineered to divert damaging contaminants, which can clog your air filter and compromise peak air-flow and horsepower output. Injen's Hydroshield also extends the time between servicing intervals, reducing costs and improving the overall user experience.
- Hydrophobic treatment to help repel water (does not make your filter water proof)
- Direct fit for many Injen air filters and/or universal applications
- Shielding the filter from contaminants resulting in more power
- Average Dimension of 6.50in Base x 6.0in Tall x 5.250in Top
- Confirmed fitment on Injen X-1046 air filters
- Extends the service life of your air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
- Black in color
- Fits - X-1046
$32.92
Injen Technology's Hydroshield are designed to enhance the efficiency of any air filter, including Injen's SuperNano-Web and our 8-Layer oiled cotton gauze air filters. Injen's Hydroshield is constructed from a proprietary base media and then treated with a hydrophobic water-repellent. Our Hydroshield is UV resistant, can stop contaminants down to.005", is puncture resistant, and has elasticity characteristics which helps the Hydroshield to return to the original shape/position after servicing. , Injen's Hydroshields are engineered to divert damaging contaminants, which can clog your air filter and compromise peak air-flow and horsepower output. Injen's Hydroshield also extends the time between servicing intervals, reducing costs and improving the overall user experience.
- Hydrophobic treatment to help repel water (does not make your filter water proof)
- Direct fit for many Injen air filters and/or universal applications
- Shielding the filter from contaminants resulting in more power
- Average Dimension of 6.50in Base x 5.0in Tall x 5.250in Top
- Confirmed fitment on Injen X-1045 air filters
- Extends the service life of your air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
- Black in color
- Fits - X-1045
Showing 660/673
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.