Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1552 products
1552 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$449.99
This K&N NextGen cold air intake system is engineered for Ford Ranger L4 2.3L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 35.87% to your engine and provides an increase of 15.7 horsepower and 21.47 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024 | Ford | Ranger | Lariat |
| 2024 | Ford | Ranger | XL |
| 2024 | Ford | Ranger | XLT |
$449.99
This K&N NextGen cold air intake system is engineered for Ford Ranger Raptor V6 3.0L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 42.6% CFM GAIN (driver side) & 55.9% CFM GAIN (passenger side) to your engine and provides an increase of 27.38 horsepower and 27.57 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Ranger | Raptor |
$425.99
This K&N NextGen cold air intake system is engineered for Ford F150/Raptor V6 2.7L/3.5L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 26.1% CFM GAIN (driver side) & 25.2% CFM GAIN (passenger side) to your engine and provides an increase of 16.2 horsepower and 16.5 torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
User 1
- Proven Legacy: Backed by over 50 years of trusted filtration performance, K&N NextGen intakes deliver superior protection and extended service intervals. Proudly engineered in the USA, each system is supported by a Limited Lifetime Warranty all while pres
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2023,2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
$425.99
This K&N NextGen cold air intake system is engineered for your FORD F150/RAPTOR V6-2.7/3.5L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 24.6% (driver side) & 33.25% (passenger side) to your engine and provides an increase of 27.20 horsepower and 40.29 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
$449.99
K&N NextGen Diesel Dryflow cold air intake systems feature a high-density polyethylene (HDPE) rotationally molded tube designed to help increase the volume of airflow to your engine and provide an increase in horsepower and torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect air intake from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- Engineered for Convenience: NextGen Dryflow® synthetic media delivers up to 99% filtration efficiency and features an easy, two-step cleaning process that requires no oil, making maintenance more convenient.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2026 | Ford | F-250 Super Duty | King Ranch |
| 2020-2026 | Ford | F-250 Super Duty | Lariat |
| 2020-2024 | Ford | F-250 Super Duty | Limited |
| 2020-2026 | Ford | F-250 Super Duty | Platinum |
| 2020-2026 | Ford | F-250 Super Duty | XL |
| 2020-2026 | Ford | F-250 Super Duty | XLT |
| 2020-2026 | Ford | F-350 Super Duty | King Ranch |
| 2020-2026 | Ford | F-350 Super Duty | Lariat |
| 2020-2024 | Ford | F-350 Super Duty | Limited |
| 2020-2026 | Ford | F-350 Super Duty | Platinum |
| 2020-2026 | Ford | F-350 Super Duty | XL |
| 2020-2026 | Ford | F-350 Super Duty | XLT |
$449.99
This K&N NextGen cold air intake system is engineered for Ford F150/F150 Raptor V6 3.5L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 59.01% CFM GAIN (driver side) & 38.3% CFM GAIN (passenger side) to your engine and provides an increase of 32.38 horsepower and 35.52 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | King Ranch |
| 2017-2020 | Ford | F-150 | Lariat |
| 2017-2020 | Ford | F-150 | Limited |
| 2017-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2017-2020 | Ford | F-150 | SSV |
| 2017-2020 | Ford | F-150 | XL |
| 2017-2020 | Ford | F-150 | XLT |
$449.99
K&N NextGen Diesel Dryflow cold air intake systems feature a high-density polyethylene (HDPE) rotationally molded tube designed to help increase the volume of airflow to your engine and provide an increase in horsepower and torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect air intake from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- Engineered for Convenience: NextGen Dryflow® synthetic media delivers up to 99% filtration efficiency and features an easy, two-step cleaning process that requires no oil, making maintenance more convenient.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Ford | F-250 Super Duty | King Ranch |
| 2017-2019 | Ford | F-250 Super Duty | Lariat |
| 2018-2019 | Ford | F-250 Super Duty | Limited |
| 2017-2019 | Ford | F-250 Super Duty | Platinum |
| 2017-2019 | Ford | F-250 Super Duty | XL |
| 2017-2019 | Ford | F-250 Super Duty | XLT |
| 2017-2019 | Ford | F-350 Super Duty | King Ranch |
| 2017-2019 | Ford | F-350 Super Duty | Lariat |
| 2018-2019 | Ford | F-350 Super Duty | Limited |
| 2017-2019 | Ford | F-350 Super Duty | Platinum |
| 2017-2019 | Ford | F-350 Super Duty | XL |
| 2017-2019 | Ford | F-350 Super Duty | XLT |
$425.99
This K&N NextGen cold air intake system is engineered for Ford F150 V8 5.0L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 46.24% to your engine and provides an increase of 15.22 horsepower and 20.37 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2015-2023 | Ford | F-150 | Platinum |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2023-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
$469.99
This K&N NextGen cold air intake system is engineered for your Dodge Challenger/Charger V8 6.4L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow up to 17.3% to your engine and provides an increase up to 23.8 horsepower and 23 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2014 | Chrysler | 300 | SRT8 |
| 2013 | Chrysler | 300 | SRT8 Core |
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2019 | Dodge | Challenger | R/T 392 |
| 2016-2023 | Dodge | Challenger | R/T Scat Pack |
| 2021 | Dodge | Challenger | R/T Scat Pack Shaker Widebody |
| 2019-2023 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2015 | Dodge | Challenger | Scat Pack |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2011-2014 | Dodge | Challenger | SRT8 |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2021 | Dodge | Challenger | T/A 392 Widebody |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2017-2018 | Dodge | Charger | R/T 392 |
| 2015-2018 | Dodge | Charger | R/T Scat Pack |
| 2019-2023 | Dodge | Charger | Scat Pack |
| 2020 | Dodge | Charger | Scat Pack 392 Widebody |
| 2022-2023 | Dodge | Charger | Scat Pack Widebody |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2012-2014 | Dodge | Charger | SRT8 |
$449.99
This K&N NextGen cold air intake system is engineered for Dodge Charger V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 42.7% to your engine and provides an increase of 14.94 horsepower and 8.22 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Chrysler | 300 | Base |
| 2013-2017 | Chrysler | 300 | C |
| 2013-2014 | Chrysler | 300 | C Luxury |
| 2015-2017 | Chrysler | 300 | C Platinum |
| 2011-2012,2015-2020 | Chrysler | 300 | Limited |
| 2012-2023 | Chrysler | 300 | S |
| 2018-2023 | Chrysler | 300 | Touring |
| 2018-2023 | Chrysler | 300 | Touring L |
| 2017-2023 | Dodge | Challenger | GT |
| 2014 | Dodge | Challenger | Rallye Redline |
| 2011 | Dodge | Challenger | SE |
| 2012-2023 | Dodge | Challenger | SXT |
| 2012,2015-2018 | Dodge | Challenger | SXT Plus |
| 2018-2023 | Dodge | Charger | GT |
| 2018 | Dodge | Charger | GT Plus |
| 2011-2023 | Dodge | Charger | Pursuit |
| 2011-2017 | Dodge | Charger | SE |
| 2012-2023 | Dodge | Charger | SXT |
| 2012,2018 | Dodge | Charger | SXT Plus |
| 2018 | Dodge | Charger | SXT Plus Leather |
$425.99
This K&N NextGen cold air intake system is engineered for your RAM 1500 L6-3.0L TT. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 32.5% to your engine and provides an increase of 41.13 horsepower and 67.85 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
User 1Installation Instructions
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ram | 1500 | Big Horn |
| 2026 | Ram | 1500 | Express |
| 2025-2026 | Ram | 1500 | Laramie |
| 2025-2026 | Ram | 1500 | Limited |
| 2025-2026 | Ram | 1500 | Limited Longhorn |
| 2025-2026 | Ram | 1500 | Lone Star |
| 2025-2026 | Ram | 1500 | Rebel |
| 2025 | Ram | 1500 | Special Service |
| 2025-2026 | Ram | 1500 | Tradesman |
| 2025 | Ram | 1500 | Tradesman HFE |
| 2025-2026 | Ram | 1500 | Tungsten |
| 2025-2026 | Ram | 1500 | Warlock |
$449.99
K&N NextGen Diesel Dryflow cold air intake systems feature a high-density polyethylene (HDPE) rotationally molded tube designed to help increase the volume of airflow to your engine and provide an increase in horsepower and torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect air intake from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- Engineered for Convenience: NextGen Dryflow® synthetic media delivers up to 99% filtration efficiency and features an easy, two-step cleaning process that requires no oil, making maintenance more convenient.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2018 | Ram | 2500 | Big Horn |
| 2013-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2013-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2013-2016 | Ram | 2500 | Outdoorsman |
| 2013-2018 | Ram | 2500 | SLT |
| 2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2013-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2013-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2013-2018 | Ram | 3500 | SLT |
| 2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$449.99
K&N NextGen Diesel Dryflow cold air intake systems feature a high-density polyethylene (HDPE) rotationally molded tube designed to help increase the volume of airflow to your engine and provide an increase in horsepower and torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect air intake from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- Engineered for Convenience: NextGen Dryflow® synthetic media delivers up to 99% filtration efficiency and features an easy, two-step cleaning process that requires no oil, making maintenance more convenient.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 2500 | Big Horn |
| 2019-2024 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2024 | Ram | 2500 | Limited |
| 2021-2024 | Ram | 2500 | Limited Longhorn |
| 2019-2024 | Ram | 2500 | Lone Star |
| 2023-2024 | Ram | 2500 | Rebel |
| 2024 | Ram | 2500 | Special Service |
| 2019-2024 | Ram | 2500 | Tradesman |
| 2019-2024 | Ram | 3500 | Big Horn |
| 2019-2024 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2024 | Ram | 3500 | Limited |
| 2021-2024 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2019-2024 | Ram | 3500 | SLT |
| 2024 | Ram | 3500 | Special Service |
| 2019-2024 | Ram | 3500 | Tradesman |
$425.99
This K&N NextGen cold air intake system is engineered for RAM 1500 V8 5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 36.45% CFM GAIN to your engine and provides an increase of 14.3 horsepower and 15.1 torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- Proven Legacy: Backed by over 50 years of trusted filtration performance, K&N NextGen intakes deliver superior protection and extended service intervals. Proudly engineered in the USA, each system is supported by a Limited Lifetime Warranty all while pres
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2020-2021 | Ram | 1500 | Special Service |
| 2019-2024 | Ram | 1500 | Tradesman |
$425.99
This K&N NextGen cold air intake system is engineered for your RAM 1500 V8-5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 36.51% to your engine and provides an increase of 19.94 horsepower and 19.93 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2020-2021 | Ram | 1500 | Special Service |
| 2019-2024 | Ram | 1500 | Tradesman |
$425.99
This K&N NextGen cold air intake system is engineered for your Jeep Wrangler/Gladiator V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow up to 65.4% to your engine and provides an increase up to 14.0 horsepower and 16.11 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$449.99
This K&N NextGen cold air intake system is engineered for Jeep Grand Cherokee L V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 48.5% to your engine and provides an increase of 12.44 horsepower and 9.43 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2024 | Dodge | Durango | Citadel |
| 2017-2026 | Dodge | Durango | GT |
| 2020-2026 | Dodge | Durango | GT Plus |
| 2023-2024 | Dodge | Durango | GT Premium |
| 2016 | Dodge | Durango | Limited |
| 2019-2026 | Dodge | Durango | Pursuit |
| 2016-2020 | Dodge | Durango | Special Service |
| 2016-2024 | Dodge | Durango | SXT |
| 2018-2021,2023-2024 | Dodge | Durango | SXT Plus |
| 2016 | Jeep | Grand Cherokee | 75th Anniversary |
| 2021 | Jeep | Grand Cherokee | 80th Anniversary |
| 2018-2020 | Jeep | Grand Cherokee | Altitude |
| 2018-2021 | Jeep | Grand Cherokee | High Altitude |
| 2016-2020 | Jeep | Grand Cherokee | Laredo |
| 2021 | Jeep | Grand Cherokee | Laredo E |
| 2021 | Jeep | Grand Cherokee | Laredo X |
| 2016-2021 | Jeep | Grand Cherokee | Limited |
| 2019-2021 | Jeep | Grand Cherokee | Limited X |
| 2016-2021 | Jeep | Grand Cherokee | Overland |
| 2016-2021 | Jeep | Grand Cherokee | Summit |
| 2017-2021 | Jeep | Grand Cherokee | Trailhawk |
| 2019-2020 | Jeep | Grand Cherokee | Upland |
| 2022 | Jeep | Grand Cherokee WK | Laredo E |
| 2022 | Jeep | Grand Cherokee WK | Laredo X |
| 2022 | Jeep | Grand Cherokee WK | Limited |
$449.99
This K&N NextGen cold air intake system is engineered for Jeep Wrangler V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 46.7% to your engine and provides an increase of 21.34 horsepower and 25.2 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2012-2017 | Jeep | Wrangler | Rubicon |
| 2012-2017 | Jeep | Wrangler | Sahara |
| 2012-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2012-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2012-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2012-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$469.99
This K&N NextGen cold air intake system is engineered for your Ram 1500 RHO; L6 3.0L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow up to 25.1% to your engine and provides an increase up to 33.4 horsepower and 32.1 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ram | 1500 | RHO |
$425.99
This K&N NextGen cold air intake system is engineered for your RAM 1500 V6-3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 61.8% to your engine and provides an increase of 14.66 horsepower and 25.70 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2018 | Ram | 1500 | Big Horn |
| 2014-2018 | Ram | 1500 | Express |
| 2013-2016 | Ram | 1500 | HFE |
| 2014-2018 | Ram | 1500 | Laramie |
| 2014-2018 | Ram | 1500 | Lone Star |
| 2013-2016 | Ram | 1500 | Outdoorsman |
| 2015-2018 | Ram | 1500 | Rebel |
| 2013-2018 | Ram | 1500 | SLT |
| 2017-2018 | Ram | 1500 | Sport |
| 2013-2018 | Ram | 1500 | Tradesman |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2019-2024 | Ram | 1500 Classic | Warlock |
$425.99
This K&N NextGen cold air intake system is engineered for Jeep Grand Cherokee V8 5.7L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 45.3% to your engine and provides an increase of 34.03 horsepower and 23.83 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2024 | Dodge | Durango | Citadel |
| 2011-2013 | Dodge | Durango | Crew |
| 2018 | Dodge | Durango | GT |
| 2014-2015 | Dodge | Durango | Limited |
| 2018-2026 | Dodge | Durango | Pursuit |
| 2011-2026 | Dodge | Durango | R/T |
| 2022-2023 | Dodge | Durango | R/T Hemi Orange |
| 2022-2026 | Dodge | Durango | R/T Plus |
| 2023-2026 | Dodge | Durango | R/T Premium |
| 2012-2026 | Dodge | Durango | Special Service |
| 2018 | Dodge | Durango | SXT |
| 2018-2020 | Jeep | Grand Cherokee | High Altitude |
| 2011-2013 | Jeep | Grand Cherokee | Laredo |
| 2011-2021 | Jeep | Grand Cherokee | Limited |
| 2019-2021 | Jeep | Grand Cherokee | Limited X |
| 2011-2021 | Jeep | Grand Cherokee | Overland |
| 2012 | Jeep | Grand Cherokee | Overland Summit |
| 2014-2021 | Jeep | Grand Cherokee | Summit |
| 2017-2021 | Jeep | Grand Cherokee | Trailhawk |
$425.99
This K&N NextGen cold air intake system is engineered for Dodge RAM 1500 V8 5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 35.7% CFM GAIN to your engine and provides an increase of 14.0 horsepower and 15.1 torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
User 1Installation Instructions
- Proven Legacy: Backed by over 50 years of trusted filtration performance, K&N NextGen intakes deliver superior protection and extended service intervals. Proudly engineered in the USA, each system is supported by a Limited Lifetime Warranty all while pres
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2011-2018 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2014 | Ram | 1500 | HFE |
| 2011-2018 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2018 | Ram | 1500 | Laramie Longhorn |
| 2015-2018 | Ram | 1500 | Limited |
| 2014-2018 | Ram | 1500 | Lone Star |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2018 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2018 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2023 | Ram | 1500 Classic | Special Service |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2019-2024 | Ram | 1500 Classic | Warlock |
| 2013-2018 | Ram | 2500 | Big Horn |
| 2013-2017 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2013-2017 | Ram | 2500 | Laramie Longhorn |
| 2016-2017 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2013-2016 | Ram | 2500 | Outdoorsman |
| 2013 | Ram | 2500 | Power Wagon |
| 2013-2018 | Ram | 2500 | SLT |
| 2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2013-2017 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2013-2017 | Ram | 3500 | Laramie Longhorn |
| 2016-2017 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2013-2018 | Ram | 3500 | SLT |
| 2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$425.99
This K&N NextGen cold air intake system is engineered for your DODGE/RAM 1500 V8-5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 43.2% to your engine and provides an increase of 17.62 horsepower and 28.50 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2011-2018 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2014 | Ram | 1500 | HFE |
| 2011-2018 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2018 | Ram | 1500 | Laramie Longhorn |
| 2015-2018 | Ram | 1500 | Limited |
| 2014-2018 | Ram | 1500 | Lone Star |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2018 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2018 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2023 | Ram | 1500 Classic | Special Service |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2019-2024 | Ram | 1500 Classic | Warlock |
| 2013-2018 | Ram | 2500 | Big Horn |
| 2013-2017 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2013-2017 | Ram | 2500 | Laramie Longhorn |
| 2016-2017 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2013-2016 | Ram | 2500 | Outdoorsman |
| 2013 | Ram | 2500 | Power Wagon |
| 2013-2018 | Ram | 2500 | SLT |
| 2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2013-2017 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2013-2017 | Ram | 3500 | Laramie Longhorn |
| 2016-2017 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2013-2018 | Ram | 3500 | SLT |
| 2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$449.99
This K&N NextGen cold air intake system is engineered for Dodge Charger V8 5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 16.7% to your engine and provides an increase of 23.5 horsepower and 18.39 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Installation InstructionsUser 1
- No-Hassle Warranty: NextGen intakes are backed by a Lifetime Limited Warranty and will preserve your factory warranty. Proudly engineered in the USA with dedicated customer support.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2020 | Chrysler | 300 | C |
| 2012-2014 | Chrysler | 300 | C Luxury |
| 2015-2017 | Chrysler | 300 | C Platinum |
| 2015,2017-2023 | Chrysler | 300 | S |
| 2011-2023 | Dodge | Challenger | R/T |
| 2012 | Dodge | Challenger | R/T Classic |
| 2015-2016 | Dodge | Challenger | R/T Plus |
| 2016 | Dodge | Challenger | R/T Plus Shaker |
| 2016 | Dodge | Challenger | R/T Shaker |
| 2017-2018 | Dodge | Challenger | T/A |
| 2017-2018 | Dodge | Charger | Daytona |
| 2011-2023 | Dodge | Charger | Pursuit |
| 2011-2023 | Dodge | Charger | R/T |
| 2015-2016 | Dodge | Charger | R/T Road & Track |
| 2011-2013 | Dodge | Charger | SE |
$73.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ford | Bronco Sport | Badlands |
| 2023-2026 | Ford | Escape | Platinum |
| 2023-2026 | Ford | Escape | ST-Line Elite |
| 2023-2026 | Ford | Escape | ST-Line Select |
| 2025-2026 | Ford | Maverick | Lariat |
| 2025-2026 | Ford | Maverick | Lobo |
| 2025-2026 | Ford | Maverick | Tremor |
| 2025-2026 | Ford | Maverick | XL |
| 2025-2026 | Ford | Maverick | XLT |
| 2023-2024 | Lincoln | Corsair | Base |
| 2025 | Lincoln | Corsair | Premiere |
| 2023-2025 | Lincoln | Corsair | Reserve |
| 2024-2026 | Lincoln | Nautilus | Black Label |
| 2024-2026 | Lincoln | Nautilus | Black Label Hybrid |
| 2024-2026 | Lincoln | Nautilus | Premiere |
| 2024-2026 | Lincoln | Nautilus | Premiere Hybrid |
| 2024-2026 | Lincoln | Nautilus | Reserve |
| 2024-2026 | Lincoln | Nautilus | Reserve Hybrid |
$59.19
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
This Part Fits:
Year Make Model Submodel 2026 Hyundai Palisade SE 2026 Hyundai Palisade SEL Convenience 2026 Hyundai Palisade SEL Premium 2026 Hyundai Palisade XRT Pro 2023-2024 Kia Sportage EX 2023-2024 Kia Sportage LX 2023-2024 Kia Sportage SX 2023-2024 Kia Sportage SX Prestige 2023-2024 Kia Sportage X-Line 2023-2024 Kia Sportage X-Pro 2023-2024 Kia Sportage X-Pro Prestige
$55.19
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
This Part Fits:
Year Make Model Submodel 2025-2026 Ford Bronco Sport Big Bend 2025-2026 Ford Bronco Sport Free Wheeling 2025-2026 Ford Bronco Sport Heritage Edition 2025-2026 Ford Bronco Sport Outer Banks 2023-2026 Ford Escape Active 2023 Ford Escape Base 2023-2026 Ford Escape ST-Line
$55.19
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
This Part Fits:
Year Make Model Submodel 2025-2026 Ford Explorer Active 2025-2026 Ford Explorer Platinum 2025-2026 Ford Explorer ST-Line 2024-2026 Ford Mustang EcoBoost 2024-2026 Ford Mustang EcoBoost Premium
$63.19
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
This Part Fits:
Year Make Model Submodel 2023-2025 Honda Accord Hybrid EX-L 2023-2025 Honda Accord Hybrid Sport 2023-2025 Honda Accord Hybrid Sport-L 2023-2025 Honda Accord Hybrid Touring 2025-2026 Honda Civic Hybrid Sport 2025-2026 Honda Civic Hybrid Sport Touring 2023-2026 Honda CR-V Hybrid Sport 2023-2026 Honda CR-V Hybrid Sport Touring 2024-2026 Honda CR-V Hybrid Sport-L 2026 Honda CR-V Hybrid TrailSport
$117.59
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
This Part Fits:
Year Make Model Submodel 2020-2023 BMW X5 M 2020,2024-2026 BMW X5 M Competition 2020-2021 BMW X5 M50i 2024-2026 BMW X5 M60i 2020 BMW X5 xDrive50i 2020-2023 BMW X6 M 2020-2021,2024-2026 BMW X6 M Competition 2020-2023 BMW X6 M50i 2024-2026 BMW X6 M60i 2021-2022 BMW X7 M50i 2023-2026 BMW X7 M60i 2023-2025 BMW XM Base 2024-2025 BMW XM Label
Showing 1140/1552
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.