Fits 2011-2021 Jeep Grand Cherokee (V8-5.7L).

Optimize your Hemi's performance with the K&N NextGen Aluminum cold air intake system. This kit replaces the restrictive factory air path with a rigid 6063 aluminum intake tube, increasing airflow volume by up to 33%. Engineered to deliver power you can feel, this system provides gains of up to 18.5 horsepower and 31.8 lb-ft of torque without the need for an ECU tune.

To combat performance-robbing heat, the system includes a custom-designed NextGen air box that shields the intake from high engine bay temperatures. At the heart of the system is K&N’s legendary washable, reusable High-Flow air filter, featuring oiled cotton media and an oversized conical design that can go up to 100,000 miles between services under normal highway conditions.

• Direct-fit for 2011-2021 Jeep Grand Cherokee 5.7L V8
• Up to 18.5 HP and 31.8 lb-ft torque increase
• Rigid 6063 aluminum intake tube for maximum airflow volume
• Washable, reusable oiled cotton lifetime air filter
• Custom NextGen air box for heat protection
• Bolt-on installation typically completed in under 60 minutes
• Manufacturer Part Number: 70-1563
• Backed by a Lifetime Limited Warranty

Fits select 2009-2013 Chevrolet Silverado 1500 models (V8-4.8L / 5.3L / 6.2L).

The K&N NextGen Aluminum cold air intake system is engineered to replace the restrictive factory air path with a high-flow 6063 aluminum intake tube. This rigid tube increases airflow volume by up to 23%, delivering dyno-tested gains of up to 15.3 horsepower and 13.3 lb-ft of torque without requiring an ECU tune. The system features a custom-designed NextGen air box that isolates the filter from engine bay heat, ensuring a cooler, denser air charge reaching the throttle body.

Included is a K&N High-Flow LIFETIME Air Filter, constructed with oiled cotton media in an oversized conical design. This washable and reusable filter can go up to 100,000 miles between cleanings under highway driving conditions. Installation is straightforward, typically completed in under 60 minutes using basic hand tools.

• Increases airflow by up to 23% over stock equipment
• Estimated gains of 15.3 HP and 13.3 lb-ft of torque
• Rigid 6063 aluminum intake tube for durability and resonance
• Custom NextGen air box protects against high engine temperatures
• Washable, reusable oiled cotton air filter (LIFETIME series)
• Direct bolt-on installation with no tuning required
• Manufacturer Part Number: 70-3070
• Backed by a K&N Lifetime Limited Warranty

Fits 2016-2023 Toyota Tacoma (V6-3.5L).

The K&N NextGen 70-9039 cold air intake system is engineered to maximize engine performance by significantly reducing airflow restriction. This system replaces the factory air path with a mandrel-bent 6063 aluminum rigid tube, increasing airflow volume to the engine by up to 40%. The result is a dyno-tested increase of up to 17.4 horsepower and 17.8 lb-ft of torque with no ECU tuning required.

Protection is handled by a custom-designed NextGen air box, which isolates the intake air from high engine bay temperatures. At the heart of the system is K&N's washable, reusable High-Flow air filter. Featuring oiled cotton media, this oversized conical filter is designed to go up to 100,000 miles between cleanings under normal highway driving conditions. The entire kit is designed for a straightforward installation that can typically be completed in under 60 minutes.

• 6063 aluminum intake tube for increased airflow and durability
• Provides up to 40% more airflow than factory intake systems
• Dyno-proven gains of up to 17.4 HP and 17.8 lb-ft torque
• Oiled cotton filter media is washable and reusable for the life of the vehicle
• Custom NextGen air box shields intake from engine heat
• Bolt-on installation requires no permanent modifications or tuning
• Manufacturer Part Number: 70-9039
• Backed by K&N Lifetime Limited Warranty

Fits select 2018-2026 Jeep Wrangler and 2020-2026 Jeep Gladiator (V6-3.6L).

Upgrade your Jeep's performance with the K&N NextGen Aluminum cold air intake system. This kit replaces the restrictive factory air path with a rigid, American-made 6063 aluminum intake tube designed to increase airflow volume by up to 47%. The result is a dyno-tested increase of up to 12.5 horsepower and 13.3 lb-ft of torque without requiring an aftermarket ECU tune.

The system features a custom-engineered NextGen air box that isolates the intake from high engine bay temperatures, ensuring a cooler, denser air charge. It is paired with a washable, reusable High-Flow LIFETIME Air Filter utilizing oiled cotton media. This oversized conical filter is built for longevity, capable of going up to 100,000 miles between services under standard highway driving conditions.

• 6063 aluminum intake tube for maximum durability and flow
• Up to 47% increase in airflow compared to factory systems
• Estimated gains of 12.5 HP and 13.3 lb-ft of torque
• Washable and reusable oiled cotton High-Flow Air Filter
• Custom air box helps maintain lower intake air temperatures
• Bolt-on installation typically completed in under 60 minutes
• Backed by a Lifetime Limited Warranty
• Manufacturer Part Number: 70-1576

Fits 2007-2008 Infiniti G35 Base, Journey, Sport, and X models.

The K&N 69-7082TS Typhoon dual air intake system replaces the restrictive factory air filters and intake housings in your Infiniti. Engineered for performance and durability, this short ram system utilizes dual mandrel-bent aluminum intake tubes finished in a silver powder coat to provide a smooth, low-restriction path for airflow. This system is paired with K&N High-Flow Air Filters featuring oiled cotton media, designed to improve filtration while increasing airflow to the engine.

• Oversized conical High-Flow Air Filters with washable, reusable oiled cotton media
• Mandrel-bent aluminum intake tubes for improved volumetric efficiency
• Custom heat shields help isolate intake air from high engine bay temperatures
• Simple bolt-on installation typically completed in 90 minutes or less
• Filter service intervals up to 100,000 miles under normal highway driving conditions
• K&N Million Mile Limited Warranty
• Manufacturer Part Number: 69-7082TS

Fits 1986-1989 Porsche 944 Base, S, Turbo, and Turbo S models (L4-2.5L).

The K&N 33-2081 High-Flow Replacement Air Filter is engineered to improve engine performance by increasing airflow up to 50%. Unlike disposable paper filters that must be frequently replaced, this filter features state-of-the-art layered, oiled cotton media designed to capture contaminants while maintaining high flow rates for the life of your vehicle. As a direct drop-in replacement for the factory air box, installation is as simple as removing the stock filter and sliding in the K&N.

• Designed to increase horsepower and acceleration
• Washable and reusable oiled cotton gauze media
• Precise fitment in factory air box prevents unfiltered air bypass
• Environmentally friendly alternative to disposable filters
• Backed by K&N’s 10-Year/Million Mile Limited Warranty
• Manufacturer Part Number: 33-2081

Fits select 2016-2019 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD.

The K&N 77-3090KTK Performance Intake Kit is designed to deliver a guaranteed increase in horsepower and torque by streamlining the engine's intake path. This system replaces the restrictive factory air filter and intake housing with a mandrel-bent aluminum intake tube and an oversized, conical High-Flow Air Filter. The oiled cotton filter media provides exceptional filtration while allowing for service intervals up to 100,000 miles under normal highway driving conditions.

Built for durability and performance, this kit includes a custom heat shield to help isolate the intake air from high engine bay temperatures. The entire system is engineered to bolt directly to factory mounting points, typically requiring less than 90 minutes for a complete installation.

• Mandrel-bent aluminum intake tube optimizes airflow velocity
• Washable, reusable oiled cotton High-Flow Air Filter media
• Custom heat shield protects intake air from engine heat
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 77-3090KTK
• K&N Million Mile Limited Warranty

Fits select 2018-2026 Jeep Wrangler, Gladiator, and Grand Cherokee (V6-3.6L).

The K&N Blackhawk Performance Air Intake System (71-1576) is designed to improve engine response and provide a more aggressive engine sound for V6-powered Jeep models. This system replaces the restrictive factory air filter and intake housing with a high-flow, black powder-coated aluminum tube and an oil-free DRYFLOW synthetic air filter. By smoothing and straightening the airflow, this intake allows your engine to breathe more efficiently than the stock assembly.

The included steel heat shield helps isolate the air filter from high engine bay temperatures, ensuring a cooler, denser air charge reaches the engine. The non-oiled synthetic filter media simplifies maintenance by providing exceptional protection without the need for oiling kits. Installation is a straightforward bolt-on process that can typically be completed in under 90 minutes using basic hand tools.

• Black powder-coated aluminum intake tube for durability and sleek aesthetics
• Oil-free DRYFLOW synthetic air filter provides high airflow and engine protection
• Steel heat shield helps protect intake air from engine heat
• Direct bolt-on installation replaces factory intake system
• K&N Million Mile Limited Warranty
• Manufacturer Part Number: 71-1576

Fits 1987-1988 Porsche 944 S.

The K&N 33-2640 High-Flow Air Filter is a performance-driven replacement for your restrictive factory paper filter. Engineered with K&N's signature layered, oiled cotton media, this drop-in filter is designed to improve airflow and capture contaminants more effectively than traditional disposables. It installs easily into your original equipment (OE) air box, providing a simple bolt-on upgrade that supports better engine breathing.

Built for the long haul, this filter is fully washable and reusable, eliminating the need for frequent replacements and reducing landfill waste. It is precision-engineered to maintain tight tolerances within the factory housing, ensuring a secure seal and reliable filtration throughout the lifespan of your vehicle.

• Increased Airflow: Engineered to provide an increase in horsepower and acceleration by reducing intake restriction.
• Washable & Reusable: Designed to last for the life of your vehicle with proper maintenance.
• Premium Filtration: Features multiple layers of oiled cotton gauze for high-capacity contaminant capture.
• Direct Fit: Replaces the factory air filter in the stock air box without modifications.
• Reliability: Backed by K&N's 10-Year/Million Mile Limited Warranty.
• Manufacturer Part Number: 33-2640

Fits select 2001-2008 Acura MDX and Honda Pilot models.

The K&N 33-2200 High-Flow Air Filter is a performance-driven drop-in replacement designed to increase airflow and capture contaminants more effectively than traditional paper filters. Constructed with multiple layers of oiled cotton media, this washable and reusable filter is engineered to last for the entire lifespan of your vehicle, offering a sustainable alternative to disposable filters.

This filter installs directly into the factory air box with no modifications required, providing a precise fit and reliable seal. Every K&N air filter is backed by a 10-Year/Million Mile Limited Warranty, ensuring long-term reliability and engine protection through years of use.

• Engineered to improve airflow and engine performance
• Layered, oiled cotton media captures dust and debris
• Washable and reusable design for the life of your vehicle
• Drops directly into the OEM air box for easy installation
• Manufacturer Part Number: 33-2200
• Backed by K&N 10-Year/Million Mile Limited Warranty

Upgrade your home heating and cooling system with the K&N Washable and Reusable HVAC Air Filter (MPN: HVC-12424). Engineered to replace standard disposable filters, this premium MERV 11 rated unit features pleated synthetic media designed to strike the ideal balance between high airflow and superior filtration. It provides a high dust-holding capacity to ensure clean air throughout your home while maintaining HVAC system efficiency.

• High-Efficiency Filtration: MERV 11 rating for capturing dust, pollen, and other airborne contaminants.
• Washable & Reusable: Designed to be cleaned and reinstalled, eliminating the need for frequent disposable filter purchases.
• Durable Construction: Built with high-quality synthetic media and a sturdy frame for long-lasting performance.
• Dimensions: 24 in. x 24 in. x 1 in.
• Sustainability: Reduces landfill waste and long-term maintenance costs.
• Warranty: Backed by a K&N lifetime limited warranty for the life of your HVAC unit.

Maintenance is straightforward: when the filter becomes dirty, simply wash, rinse, and reinstall. This sustainable solution ensures your system receives consistent airflow without the recurring expense of replacement filters.

Fits 2003-2007 Hummer H2 Base models. The K&N RP-5103 is a high-performance, clamp-on universal air filter engineered for both durability and airflow efficiency. Featuring a genuine carbon fiber top and base, this filter offers a high-strength, lightweight design with a smooth, glass-like finish that stands up to engine bay heat and vibration.

• Media Type: Washable, oiled cotton media for superior filtration and airflow.
• Construction: Pliable flanges help absorb vibration and can be stretched up to 1/16-inch to accommodate in-between sizes.
• Flange Specs: 3-7/8 inch (98mm) inside diameter and 15/16 inch (24mm) flange length.
• Filter Dimensions: 12-inch x 6-inch base with a 7-inch overall height.
• MPN: RP-5103
• Warranty: Includes a one-year limited warranty.

This universal filter is designed to clamp directly to your intake piping, providing a secure fit and a significant aesthetic upgrade to your vehicle's engine compartment.

Fits select 1976-2008 Honda, Yamaha, Bombardier, and Can-Am models.

The K&N PreCharger RU-0510PK is a specialized filter wrap designed to extend the service intervals of your K&N air filter when operating in extremely dusty or off-road conditions. Made from a durable, uniform-weave polyester material, the PreCharger captures small dirt particles and debris before they reach the primary filter pleats, significantly reducing the maintenance frequency without compromising airflow.

• Manufacturer Part Number: RU-0510PK
• Dimensions: 3.5 in. Internal Diameter x 5 in. Height
• Construction: Durable treated polyester weave
• Maintenance: Fully cleanable and reusable with K&N Filter Cleaner
• Color: Blue

Vehicle Fitment

Fits 1995-1998 Toyota T100 models equipped with the V6-3.4L engine.

The K&N 57 Series FIPK (Fuel Injection Performance Kit) is engineered to replace the restrictive factory air filter and intake housing in your Toyota T100. By utilizing a rotationally-molded high-density polyethylene (HDPE) intake tube, this system increases the volume of airflow to your engine for a guaranteed boost in horsepower and torque. A custom-fit heat shield is included to help isolate the intake air from high engine bay temperatures, ensuring a cooler, denser air charge.

This performance intake is paired with an oversized, conical High-Flow Air Filter featuring K&N's signature oiled cotton filter media. Designed for longevity and performance, this filter is washable and reusable, capable of going up to 100,000 miles between services under normal highway driving conditions. The entire system is designed to bolt on using factory mounting points and can typically be installed in less than 90 minutes.

• MPN: 57-9024
• Tube Material: High-Density Polyethylene (HDPE)
• Filter Type: Washable, reusable oiled cotton media
• Service Interval: Up to 100,000 miles between cleanings
• Hardware: Includes custom heat shield and necessary mounting hardware
• Installation: Bolt-on; estimated 90-minute install time

Fits 1967-1973 Lotus Elan (2, Base, S4, and Sprint models).

The K&N 56-9105 Custom Air Filter assembly is engineered to increase airflow and engine performance for single or two-barrel carburetors. Designed for classic and performance applications, this oval assembly features high-quality chrome top and base plates that provide a durable, mirror-like finish while providing a rigid seal for the filtration element. At its core is the signature K&N High-Flow Washable Air Filter, which utilizes oiled cotton gauze media to provide low restriction and excellent filtration efficiency.

• Direct Fit: Features a 51mm (approx. 2-inch) neck flange for precise mounting to compatible carburetor inlets.
• Premium Materials: Mirror-finish chrome top and base plates for enhanced engine bay aesthetics and corrosion resistance.
• High-Flow Media: Red oiled cotton gauze filter is washable and reusable, providing a long service life and reduced waste.
• Application Specific: Designed to fit within the constraints of the 1967-1973 Lotus Elan engine compartment.
• Part Number: 56-9105

Fits select 2007-2022 Dodge, Freightliner, Jeep, Mercedes-Benz, and Ram vehicles (3.0L).

The K&N HP-7028 Performance Cartridge Oil Filter is engineered for high-flow performance and exceptional filtration. Designed to meet the demands of high-performance engines and racers, this cartridge filter utilizes a premium media that traps harmful contaminants while maintaining high oil flow rates. It is fully compatible with advanced synthetic motor oils and is manufactured to rigorous engineering standards for reliable protection over extended service intervals.

• High-flow design helps improve engine performance by reducing oil filter restriction
• Premium filtration media traps 99% of harmful contaminants
• Compatible with synthetic, conventional, and blended motor oils
• Manufactured to meet or exceed OE engineering specifications
• Specific cartridge design for easy replacement in factory filter housings

Specifications:

• Part Number: HP-7028
• Outer Diameter: 2.75 in (70 mm)
• Height: 3.625 in (92 mm)
• Filter Type: Cartridge

Fits 2024-2026 Toyota Tacoma and 2025-2026 Toyota 4Runner (L4-2.4L Turbo).

The K&N 63-8003 Snorkel System is engineered to provide your engine with a consistent supply of cleaner, cooler air during extreme off-road conditions. By relocating the air inlet to the vehicle's highest point, this kit protects your engine from dust, sand, and heavy debris, while also reducing the risk of water ingestion during stream crossings (note: not rated for complete water submersion).

Built from durable, one-piece roto-molded polyethylene, this system offers an integrated appearance that complements the aggressive styling of the newest Toyota trucks. It is specifically designed to fit with K&N cold air intake systems, helping to preserve airflow and enhance induction tone without compromising filtration efficiency. Proudly designed and manufactured in the USA, this elevated intake is a vital upgrade for overlanding and technical trail use.

• Relocates air intake to roof level for cleaner air induction
• Durable one-piece roto-molded construction
• Reduces filter clogging in dusty or sandy environments
• Specifically designed for compatibility with K&N intake systems
• Integrated, factory-style appearance
• Manufacturer Part Number: 63-8003

Fits 2004-2005 Chevrolet Kodiak and GMC Topkick models equipped with the 6.6L V8 diesel engine.

The K&N 77 Series Performance Intake Kit (77-3063KTK) is engineered to reduce intake restriction and smooth out airflow to your engine. By replacing the factory air box and restrictive intake path with a mandrel-bent aluminum intake tube and an oversized High-Flow Air Filter, this system allows your engine to breathe more efficiently, resulting in a documented increase in horsepower and torque. The silver powder-coated aluminum tube provides a durable, professional look under the hood while maintaining consistent internal diameters for optimized velocity.

This system includes a custom heat shield designed to protect the air filter from high engine bay temperatures, ensuring a cooler, denser air charge. The included washable, reusable oiled cotton filter media is designed for long-term durability and can go up to 100,000 miles between cleaning services under normal highway driving conditions.

• Mandrel-bent aluminum intake tube for improved airflow and durability
• Oversized conical High-Flow Air Filter with oiled cotton media
• Custom heat shield included to isolate the filter from engine heat
• Direct bolt-on installation typically completed in 90 minutes or less
• Manufacturer Part Number: 77-3063KTK
• Back by the K&N Million Mile Limited Warranty

Fits 2023-2025 Honda Civic Type R and 2024-2025 Acura Integra Type S.

The K&N 69-1511TWR Performance Air Intake System is engineered to reduce intake restriction and smooth out airflow to your engine. By replacing the restrictive factory air box and intake tract with a custom mandrel-bent aluminum tube, this system allows your turbocharger to breathe more efficiently. The kit includes K&N's signature High-Flow Air Filter, featuring washable, oiled cotton media designed for long-term use and excellent filtration.

• Mandrel-bent aluminum intake tube for streamlined airflow
• Washable, reusable High-Flow Air Filter with oiled cotton media
• Direct bolt-on design for straightforward installation
• Designed to maintain factory engine management and warranty compliance
• Manufacturer Part Number: 69-1511TWR

Fits 2005-2007 Chevrolet Corvette (Base).

The K&N RP-5135 Universal Air Filter is engineered for enthusiasts seeking a high-performance, lightweight filtration solution. This clamp-on filter features a premium oiled cotton filter media, reinforced by a genuine carbon fiber top and base. The carbon fiber construction not only provides exceptional strength and a high-gloss, glass-like finish but also contributes to a lightweight design suitable for demanding engine bays.

Designed for secure installation, the RP-5135 includes a pliable flange that absorbs vibration and can stretch up to 1/16-inch to accommodate varied intake sizes. The filter top is equipped with a 6mm threaded hole to simplify mounting with a standard bolt, ensuring the assembly remains stable under load.

• Manufacturer Part Number: RP-5135
• Filter Material: Oiled Cotton Media
• Top/Base Material: Carbon Fiber with embossed K&N logo
• Flange Inside Diameter: 3-5/16 in (84 mm)
• Flange Length: 2 in (51 mm)
• Filter Height: 4-13/16 in (122 mm)
• Base Dimensions: 18-3/4 in x 5 in (476 mm x 127 mm)
• Mounting: Threaded hole for 6mm bolt
• Warranty: One Year Limited Warranty

The K&N Drycharger (RC-4780DK) is a specialized, silicone-treated polyester wrap engineered to protect your high-flow air filter or personal watercraft flame arrestor from moisture and debris. This round tapered wrap features uniform micron-sized openings that allow for consistent airflow while providing a water-repellent barrier that prevents filter saturation in damp conditions.

• Model: K&N Drycharger
• MPN: RC-4780DK
• Dimensions: 6.625in (168mm) Base ID, 5.25in (133mm) Top ID, 9.5in (241mm) Height
• Material: Silicone-treated polyester
• Shape: Round Tapered
• Color: Black
• Performance: Water-repellent treatment typically lasts 1 to 2 years under normal use
• Function: Limits water intake without significantly restricting high-volume airflow

Fits 2008-2010 Chevrolet Cobalt SS (L4-2.0L Turbo).

The K&N 69-4518TTK 69 Series Typhoon Short Ram Intake system is a performance-oriented induction kit designed to replace the restrictive factory air filter and intake housing on your Cobalt SS. By utilizing a mandrel-bent aluminum intake tube, this system reduces airflow restriction and ensures a smooth, consistent path for air to reach the turbocharger, resulting in measurable gains in horsepower and torque.

Each system is equipped with a washable, reusable High-Flow Air Filter featuring K&N signature oiled cotton filter media. This oversized conical filter is designed for high airflow and can go up to 100,000 miles between services under normal highway driving conditions. A custom-fit heat shield is included to isolate the air filter from high engine bay temperatures, ensuring a cooler, denser intake charge.

• Guaranteed increase in horsepower and torque
• Mandrel-bent aluminum intake tube for improved airflow
• Includes washable, reusable oiled cotton High-Flow Air Filter
• Custom heat shield helps protect intake air from engine heat
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 69-4518TTK
• K&N Million Mile Limited Warranty

Fits 2000-2008 Honda S2000 Base and CR models (2.0L / 2.2L).

The K&N 57-3514 Performance Air Intake System is engineered to replace the restrictive factory air filter and intake housing to provide a guaranteed increase in horsepower and torque. It features a rotationally-molded high-density polyethylene (HDPE) intake tube designed to streamline and increase the volume of airflow to your engine. The system includes a custom heat shield to help isolate the intake air from high engine bay temperatures, ensuring a cooler, denser oxygen charge for better combustion.

This kit is paired with a washable, reusable High-Flow Air Filter featuring K&N's signature oiled cotton filter media. The oversized conical design allows for up to 100,000 miles between filter services under normal highway driving conditions. The entire system is designed for a straightforward installation that can typically be completed in less than 90 minutes with basic hand tools.

• Manufacturer Part Number: 57-3514
• Tube Material: Rotationally-molded High-Density Polyethylene (HDPE)
• Filter Media: Oiled cotton gauze, washable and reusable
• Filter Style: Conical, oversized
• Installation Time: Approximately 90 minutes
• Warranty: K&N Million Mile Limited Warranty

Fits 2001-2004 Chevrolet Corvette models including Base, 50th Anniversary Edition, and Pace Car (V8-5.7L).

The K&N 57-3035 Performance Intake Kit is engineered to reduce intake restriction by replacing the restrictive factory air filter and intake housing. This system features a rotationally-molded high-density polyethylene (HDPE) intake tube designed to increase the volume of airflow to your engine. By streamlining the air path, this kit provides a tangible increase in horsepower and torque for the C5 Corvette.

This intake system includes a washable, reusable K&N High-Flow Air Filter made with oiled cotton media. Its oversized, conical design allows for extended service intervals, typically up to 100,000 miles under normal highway driving conditions. To ensure the engine breathes the coolest air possible, a custom-engineered heat shield isolates the filter from the high temperatures of the engine bay.

• Manufacturer Part Number: 57-3035
• Intake Tube Material: High-Density Polyethylene (HDPE)
• Filter Media: Oiled Cotton
• Service Interval: Up to 100,000 miles before cleaning is required
• Installation Time: Typically 90 minutes or less using factory mounting points
• Components Included: HDPE intake tube, oversized conical air filter, heat shield, and all necessary hardware

The K&N RU-1048XD Universal Clamp-On Air Filter is engineered for versatility across high-performance applications, including racing vehicles, custom air intakes, and industrial equipment. This round tapered filter features K&N’s signature washable and reusable media, designed to provide high airflow while maintaining critical filtration standards.

Constructed with an ultra-strong, molded pliable rubber flange, this filter is built to absorb engine vibrations for a secure, long-lasting attachment. The flange material is flexible enough to be stretched up to 1/16 of an inch (1.5mm), allowing it to fit between standard sizes for a precise seal on your intake or velocity stack.

• Manufacturer Part Number: RU-1048XD
• Flange Inside Diameter: 6 in (152 mm)
• Base Outside Diameter: 7.5 in (191 mm)
• Top Outside Diameter: 4.5 in (114 mm)
• Filter Height: 6 in (152 mm)
• Material: Washable cotton gauze with pliable rubber flange
• Features: Vibration-absorbing, clamp-on design, reusable
• Warranty: 1-Year Limited Warranty

Fits 2008-2013 Chevrolet Corvette Base and Grand Sport models.

The K&N RP-5161 Universal Air Filter is a high-performance clamp-on filter engineered for strength, durability, and weight reduction. It features a genuine carbon fiber top and base, providing a lightweight structural design with a smooth, glass-like aesthetic. The filtration is handled by K&N’s signature oiled cotton media, designed to increase airflow while maintaining high filtration efficiency. To ensure a secure, vibration-resistant seal, the pliable rubber flanges can be stretched up to 1/16-inch to accommodate intermediate intake tube sizes.

• Manufacturer Part Number: RP-5161
• Filter Material: Oiled Cotton Gauze
• Top/Base Material: Carbon Fiber
• Shape: Oval
• Flange Inside Diameter: 3.25 in (83 mm)
• Flange Length: 2 in (51 mm)
• Filter Height: 4.625 in (117 mm)
• Base Dimensions: 8.75 in x 5 in
• Included Hardware: Stainless Steel Hose Clamp
• Warranty: One-Year Limited Warranty

This K&N Universal Chrome Air Filter (RC-1200) is engineered for versatile performance across a wide range of applications, including racing vehicles, power equipment, snowmobiles, and custom engine builds. Designed to provide high-flow filtration, it features a chrome-plated top for a finished look and a durable, pliable rubber flange that absorbs engine vibration for a secure, leak-free connection.

The molded rubber flange can be stretched up to 1/16-inch (1.5mm) to fit intermediate intake sizes, ensuring a tight seal on the mounting point. As a washable and reusable filter, the RC-1200 provides a sustainable alternative to disposable paper elements while maintaining the superior airflow characteristics K&N is known for.

• Flange Inside Diameter: 2.063 in (52 mm)
• Base Outside Diameter: 3.5 in (89 mm)
• Top Outside Diameter: 2 in (51 mm)
• Filter Height: 4 in (102 mm)
• Material: Chrome top with molded rubber flange
• Maintenance: Washable and reusable
• Manufacturer Part Number: RC-1200
• Warranty: 1-Year Limited Warranty

Fits 2017-2026 Ford F-250 and F-350 Super Duty models (6.7L Diesel).

Protect your high-pressure fuel system and maintain engine performance with the K&N Performance Cartridge Fuel Filter. Engineered to deliver high flow rates while maintaining exceptional filtration capacity, this filter serves as a direct replacement for the original equipment cartridge. The specialized cellulose glass media is specifically designed to trap and hold harmful contaminants, including rust, dirt, scale, and other foreign materials that can compromise fuel injectors and sensitive components.

• Advanced cellulose glass media for superior contaminant removal
• High-flow design maintains consistent fuel delivery
• Traps rust, scale, and particulate matter
• Designed for diesel truck applications
• Manufacturer Part Number: PF-4900

Fits select 2015-2024 Harley-Davidson and Indian motorcycles, including Street 500/750, Challenger, Chief, Chieftain, Roadmaster, and Springfield models.

The K&N Powersports Spin-On Oil Filter KN-175 is engineered to provide exceptional filtration and high oil flow rates for high-performance motorcycles. Featuring a specialized synthetic-blend filtration media, this filter is designed to remove harmful engine contaminants while remaining compatible with synthetic, petroleum, and blended oils—including high-concentration synthetic racing oils. This ensures your engine receives clean oil even under demanding operating conditions.

Maintenance is simplified thanks to the heavy-duty canister construction and a 17mm welded hex nut, which allows for quick and easy removal using standard tools. Every K&N powersports filter is built to withstand the service intervals recommended by vehicle manufacturers and is backed by a 1-year limited warranty.

• MPN: KN-175
• High Flow Rates: Designed to provide consistent oil delivery to critical engine components.
• Advanced Filtration: Synthetic-blend media protects against abrasive contaminants.
• 17mm Hex Nut: Welded nut for fast, easy filter removal during oil changes.
• Heavy-Duty Build: Durable canister designed for the high-vibration environment of powersports vehicles.
• Oil Compatibility: Compatible with all synthetic and conventional motor oils.
• Warranty: K&N 1-Year Limited Warranty.

Fits select 2008-2018 Audi and Volkswagen models, including Audi A3, A4, A5, A6, Q3, Q5, TT, and VW CC, GTI, Jetta, Passat, and Tiguan.

The K&N HP-3004 Performance Silver Oil Filter is engineered for professional installers and DIY enthusiasts who demand high flow rates and exceptional filtration. Designed to operate with all synthetic, conventional, and blended motor oils, this filter utilizes a pleated synthetic-blend media to capture harmful contaminants while ensuring a consistent supply of oil to your engine's critical components. The heavy-duty canister is built for durability, and the signature 1-inch welded hex nut allows for quick and easy removal with a standard wrench.

• High-Flow Filtration: Engineered to provide outstanding flow rates and consistent oil pressure.
• Synthetic-Blend Media: Advanced pleated media helps protect the engine from contaminants and debris.
• Wrench-Off Removal: Features a welded 1-inch hex nut for fast, tool-assisted filter removal.
• Heavy-Duty Construction: Durable canister designed to withstand service intervals recommended by vehicle manufacturers.
• Compatibility: Safe for use with synthetic, conventional, and blended oils.
• MPN: HP-3004
• Warranty: K&N 1-Year Limited Warranty.