The MagnaFlow SPEQ Series Performance Exhaust System #19696 is engineered for enthusiasts who demand more from sound, style, and performance. Designed specifically for the 2024–2026 DE5 Acura Integra Type S with the K20C8 2.0L, this cat-back system delivers dyno-proven power gains, a bold performance tone, cutting-edge modularity, and an upgraded driving experience. At its core is a high-flow 3” mandrel-bent stainless steel architecture that channels exhaust gases through three straight-through mufflers, converging in a triple center exit with 4.5” black chrome tips etched with the MagnaFlow logo. The result is a deep, aggressive tone that commands attention without the drone. But this system isn’t just about sound. It’s about control. Thanks to MagnaFlow’s modular design, you can fine-tune your exhaust note by swapping between muffler and straight-pipe modules using quick release racing bred V-band clamps. Whether you're carving canyon roads or hitting the track, you choose how your Integra speaks. Installation is seamless, thanks to precision 3D scanning and a direct-fit layout that replaces all OEM components from the catalytic converter back while retaining full valve functionality thanks to MagnaFlow’s cast stainless active performance valve. Built from corrosion-resistant stainless steel and manufactured with CNC robotic precision, #19696 is backed by MagnaFlow’s limited lifetime construction warranty.

• No-Drone-Technology allows for a quiet cabin
• Increased Horsepower and Torque
• 100% Stainless Steel

This Part Fits:

The Black DPF series is our premier MagnaFlow Performance DPF Series featuring stainless construction with the added style of a Black Coating applied from tailpipe to tip. MagnaFlow Performance Exhaust System Kit 19693 is made of durable stainless steel and built using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime construction warranty and 1 year finish warranty.

• 409 Stainless Steel Construction With High Temp Satin Black Coating
• 300 Series Stainless Steel Black Coated Intercooled Tip[s]
• 300 Series Stainless Steel Black Coated Intercooled Tip
• Mandrel Bent Tubing

This Part Fits:

The MagnaFlow 2025-2026 Ram 1500 D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19686 offers enthusiasts an easy way to upgrade their 2025-2026 Ram 1500 I6-3.0L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your RAM truck and replaces the restrictive factory muffler with a MagnaFlow 11” NDT (No Drone Technology) resonator while retaining the OEM piping and tailpipe. 19686 is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3” main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.

• Maintains The OEM Piping And Tailpipe
• Mandrel Bent Stainless Steel Tubing
• 409 Stainless Steel Construction

This Part Fits:

The MagnaFlow 2025-2026 Ram 1500 I6-3.0L SPEQ Series Cat-Back Performance Exhaust System 19685 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19685 2.5” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance round muffler before exiting in a dual split rear exit with 5” black coated tips. This full-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19685 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19685 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow 2024-2026 Toyota Tacoma SPEQ Series Cat-Back Performance Exhaust System 19681 brings out the personality of your truck with our signature resonant, powerful engine tone and dyno-proven performance. MagnaFlow #19681 3” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance oval muffler before exiting in a dual same side behind driver rear tire exit with 3.50” black coated welded-on double wall angle cut folded edge tips. This MagnaFlow truck exhaust kit is the perfect equalizer between sound and performance. Elevate your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this exhaust system your truck will be producing moderate exterior and mild interior sound levels for a smooth and comfortable driving experience. Exhaust kit 19681 features a cat-back layout that replaces your truck’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit exhaust design that you can easily install yourself. 19681 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow 2024-2026 Toyota Tacoma SPEQ Series Cat-Back Performance Exhaust System 19680 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19680 3” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance oval muffler before exiting in a single driver side rear exit with a 4” black chrome welded-on double wall angle cut rolled edge tip. This mid-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19680 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19680 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow® Toyota Land Cruiser Overland Series™ Cat-Back Performance Exhaust System #19679 is engineered for off-road function and built to explore further. This Toyota Land Cruiser exhaust system is designed for the 2024-2026 Toyota Land Cruiser equipped with the L4 2.4L engine. The high clearance exhaust design of this kit is intended to keep your truck clear of any challenging terrain or obstacles you may come across. #19679 3” diameter mandrel bent main piping passes through an all-new specifically tuned performance oval and round mufflers with No Drone Technology (NDT) before exiting in a high-clearance single driver side rear exit style. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19679 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Toyota Land Cruiser cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow® Toyota Tacoma Overland Series™ Cat-Back Performance Exhaust System #19678 is engineered for off-road function and built to explore further. This Toyota Tacoma exhaust system is designed for the 2024-2026 Toyota Tacoma equipped with the L4 2.4L engine option. The high clearance exhaust design of this kit is designed to keep your truck clear of any challenging terrain or obstacles you may come across. #19678 3” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance oval muffler before exiting in a high-clearance single driver side rear exit style. Also included is a clamp-on tailpipe sub-assembly with a single driver side rear exit and black chrome 4” tip giving you a finished look when cruising around town. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19678 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Toyota Tacoma cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow® Lexus GX550 Overland Series™ Cat-Back Performance Exhaust System #19677 is engineered for off-road function and built to explore further. This Lexus GX550 exhaust system is designed for the 2024-2026 Lexus GX550 equipped with the V6 3.4L engine. The high clearance exhaust design of this kit is intended to keep your SUV clear of any challenging terrain or obstacles you may come across. #19677 3” diameter mandrel bent main piping passes through an all-new specifically tuned performance oval and round mufflers with No Drone Technology (NDT) before exiting in a high-clearance single driver side rear exit style. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19677 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Lexus GX550 cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow® Toyota 4Runner Overland Series™ Cat-Back Performance Exhaust System #19657 is engineered for off-road function and built to explore further. This Toyota 4Runner exhaust system is designed for the 2025-2026 Toyota 4Runner equipped with the L4 2.4L GAS engine. The high clearance exhaust design of this kit is intended to keep your truck clear of any challenging terrain or obstacles you may come across. #19657 3” diameter mandrel bent main piping passes through an all-new specifically tuned performance oval and round mufflers with No Drone Technology (NDT) before exiting in a high-clearance single driver side rear exit style. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19657 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Toyota 4Runner cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow 2023-2026 Chevrolet Colorado / GMC Canyon NEO Series Cat-Back Performance Exhaust System 19649 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 straight-through muffler ending in a Single Passenger Side Rear exit with 4in. polished welded-on double wall angle cut rolled edge tips, this mid-size truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your truck to the next level with an exhaust that has the pipes to put other truck's to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19649 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19649 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow 2024-2026 Ford Ranger Raptor Competition Series Cat-Back Performance Exhaust System 19637 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This cat-back exhaust kit is designed to enhance your 3.0L V6 2024-2026 Ford Ranger Raptor with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. diameter piping that passes a straight-through muffler ending in a dual rear exit with 4in. welded-on double wall angle cut folded edge tips featuring a sporty black chrome finish. Exhaust system 19637’s cat-back layout replaces your truck's exhaust system from the catalytic converter on back with a weight-optimized, corrosion resistant, and durable stainless-steel design. Our Tech Center team has worked diligently to ensure that the fully functional Magnaflow valves included in this kit seamlessly integrate with the factory drive mode selections in your Ranger Raptor. This race-ready exhaust system is engineered to make your Ford Ranger Raptor's V6 engine produce moderate interior and aggressive exterior sound levels. Extensive 3D scanning was used during the development of this Ford Ranger Raptor exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. Exhaust system 19637 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.

• Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
• Increased Horsepower And Torque
• Aggressive exterior sound

This Part Fits:

The MagnaFlow Honda Ridgeline NEO Series Cat-Back Performance Exhaust System #19633 adds a healthy serving of dyno-proven performance and a modern, aggressive exhaust note to your 2021-2026 Honda Ridgeline equipped with the 3.5L engine option. This exhaust kit is designed to replace all OEM exhaust components from near the catalytic converter on back. Bystanders will know something is up when your truck pulls away from the rest of the vehicles at each stoplight with a quick launch and a triumphant roar, leaving everyone else in its wake. This increase in performance is made possible by the redesigned exhaust, which features 2.5” mandrel bent main piping that passes through an 18” oval straight through muffler before smoothly transitioning via a Y-pipe to a single-to-dual split rear exit with 4” double wall, angle-cut and logo etched tips finished in black chrome. #19633 is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques for an OEM-like, easy to install direct-fit design. MagnaFlow stands by this Honda Ridgeline performance exhaust with our limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow Toyota GR Corolla NEO Series Cat-Back Performance Exhaust System #19631 turns your ultimate sporty compact into a JDM-like beast that stays at the head of the pack thanks to its modern take on MagnaFlow’s signature sound and renowned dyno-proven power gains. This 2023-2026 GR Corolla exhaust kit represents an all-around performance improvement for your GR’s 1.6L without compromises, even going so far as to retain your OEM vehicle’s factory controllable exhaust valve option using MagnaFlow’s own cast 304 stainless steel valves. Additionally, #19631 seamlessly integrates MagnaFlow’s No Drone Technology (NDT) to ensure optimal driver enjoyment, free of any unwanted droning noises that can otherwise occur at cruising speeds. Exhaust kit #19631 features 3” mandrel bent main piping that passes through an 11” NDT tuned chamber, smooth Y-pipe transition and two 11” straight-through performance mufflers before terminating in a quad center split rear exit with 4.5” outer and 3.375” inner tips featuring a double wall, angle-cut logo etched design with a black chrome finish. This performance exhaust features an easy-to-install, direct-fit design that is engineered to replace all OEM exhaust components from near the catalytic converter on back. #19631 is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow Jeep Wrangler Overland Series Axle-Back Performance Exhaust System #19620 brings additional off-roading prowess, dyno-proven performance and a tunable exhaust sound to your 2018-2023 Jeep Wrangler JL equipped with the 2.0L or 3.6L engine option. The high clearance design of this exhaust system is designed to keep clear of any challenging terrain you may come across. #19620's 2.5" diameter mandrel bent main piping passes through an 18" straight-through oval muffler and NDT (No Drone Technology) tuned chamber before terminating in a high-clearance tucked tailpipe to the rear of the passenger side. No Drone Technology utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. The entire kit can be tailored to your preferred exhaust tone by changing out which module is attached to the integrated muffler's accessory port. The included pipe cap, J-pipe and NDT modules can be combined in various ways to mitigate a wide range of droning frequencies, so which sound profile you choose to go with is up to you. Because the integrated overland muffler incorporates NDT technology to begin with, all configurations offer various forms of NDT benefits. Looking to minimize overall drone? Simply connect the NDT module. Prefer a more traditional rendition of that famous MagnaFlow exhaust tone? All you need to do is cover the accessory port with the included pipe cap. Exhaust kit #19620 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from near the rear axle on back. This Jeep Wrangler performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow's limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow Honda Civic Sport NEO Series Cat-Back Performance Exhaust System #19610 is engineered to unlock the sound and dyno-proven potential of your 2022-2026 Civic sedan equipped with the 2.0L engine option. This performance exhaust kit features 2.25” diameter mandrel bent main piping that passes through 14” round and 11” oval straight-through performance mufflers before terminating in a single straight passenger-side rear exit with a 4” double wall angle-cut dry carbon fiber tip. It is designed to replace all the OEM exhaust components from near the catalytic converter on back. #19610 utilizes flanged connections with all-new gaskets and hardware, as well as a midbody resonator tuned specifically for your sedan’s 2.0L engine. Each of these Honda Civic Sport sedan exhaust systems is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow Subaru WRX Competition Series Performance Exhaust System #19609 brings the spirit of your sporty sedan’s rally car ancestors to your 2022-2026 Subaru WRX with dyno-tested performance gains and a race-ready rendition of the signature exhaust sound that MagnaFlow is famous for. Exhaust kit #19609 features 2.25” diameter mandrel bent main piping with a muffler delete, straight pipe design that’s ready to unleash the full fury of your car’s boxer engine. #19609 terminates in a quad split rear exit with 4” black chrome finished tips. This Subaru WRX exhaust system’s direct-fit design is engineered to fit perfectly, enabling an easy, do-it-yourself installation process. The durable, corrosion resistant stainless-steel construction of #19609 is made possible thanks to advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime construction warranty and 1-year finish warranty.

• Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
• Increased Horsepower And Torque
• Aggressive exterior sound

This Part Fits:

The MagnaFlow Subaru WRX Competition Series Performance Exhaust System #19608 is engineered to bring the sound and performance of your souped-up Subie a step closer to its rally-bred roots. Extensive dyno-testing and careful tuning has resulted in an exhaust kit that will set your 2022-2026 Subaru WRX apart from the rest, with an exhaust note that shows off what a beast your vehicle’s boxer engine truly is. #19608 features a cat-back configuration with 3” diameter mandrel bent main piping and a fast-flowing, straight through muffler that ends in a quad split rear exit with 4” black chrome finished tips. This Subaru WRX exhaust system’s direct-fit, easy-to-install design is made of durable, corrosion resistant stainless steel and constructed using advanced CNC precision robotic manufacturing techniques. MagnaFlow stands by exhaust kit #19608 with our limited lifetime construction warranty and 1-year finish warranty.

• Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
• Increased Horsepower And Torque
• Aggressive exterior sound

This Part Fits:

The MagnaFlow Toyota Tundra Street Series 19603 brings out the personality of your 3.4L 2022-2026 Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and a straight-through muffler ending in a dual same side behind driver rear tire exit with 3.5in. black coated, welded-on, double wall, angle cut, folded edge tips, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundras to shame. With this system your vehicle will be producing aggressive exterior and moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19603 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19603 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow NEO Series Cat-back Acura Integra/Honda Civic Si Performance Exhaust System #19600 is engineered to enhance the sound and performance of your sporty compact’s 1.5L I4 engine with improved airflow and a fresh take on MagnaFlow’s signature exhaust sound. Passersby and passengers in your 2023-2026 Acura Integra or 2022-2026 Honda Civic Si will know that more than just the VTEC kicked in when your right foot sends your car’s four-banger barreling towards its redline with a ferocity that the stock Civic Si and Integra simply can’t match. Improved exhaust flow is made possible thanks to the system’s 2.5” mandrel bent main tubing with dual 4”x 4” x 11” NDT (No Drone Technology) resonators, terminating in a dual split rear exit with 4.5” carbon fiber tips. Exhaust kit #19600’s integration of MagnaFlow’s No Drone Technology ensures that unwanted droning noises are kept in check at cruising speeds while allowing you to enjoy all the other epic engine sounds your NEO Series system makes possible. #19600’s easy-to-install, direct-fit bolt-on design replaces all major exhaust components from near the catalytic converter on back and is made entirely of durable, corrosion resistant stainless steel (except the carbon fiber tips), all covered by MagnaFlow’s limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow 2022-2024 Ford Maverick Street Series Cat-Back Performance Exhaust System 19597 brings out the personality of your 2.0L 2022-2024 Ford Maverick with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Driver Rear Tire exit with 3.5in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Ford Maverick exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Maverick's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19597 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19597 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow® JL Jeep Wrangler Overland Series™ Cat-Back Performance Exhaust System #19592 will inject your Jeep Wrangler JL Unlimited V6 (2018-2026) with MagnaFlow®’s deep signature sound and dyno-proven performance. MagnaFlow® exhaust kit #19592 is weight optimized for improved utility and features a single straight-through muffler with 2.5” mandrel bent main piping that fits closer to the undercarriage of the vehicle compared to the stock configuration. This combined with a no-tip, high clearance driver side rear exit greatly enhances your JL Jeep Wrangler’s ground clearance and departure angles. The exhaust system was designed to be compatible with the most popular bolt-on aftermarket modifications. Each system incorporates MagnaFlow®’s No Drone Technology, which mitigates interior noise by cancelling out the natural droning frequencies produced by your JL Jeep Wrangler at cruising speeds while retaining the character of your engine’s exhaust note. CNC precision robotic manufacturing techniques enable perfect fitment and allow for hassle-free bolt-on installation. MagnaFlow® #19592 is made entirely of durable stainless steel and backed by MagnaFlow®’s limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow® 2nd Gen Toyota Tacoma Overland Series™ Cat-Back Performance Exhaust System #19585 brings MagnaFlow®’s signature deep rumble and dyno-proven performance to your overland 2nd generation 2005-2015 Toyota Tacoma. Each exhaust kit’s weight is optimized to improve utility, while the mandrel bent 2.5” piping and single straight-through muffler are tucked up closer to the body of the vehicle. Together with a no-tip, high-clearance, passenger-side rear exit, these upgrades improve the ground clearance and utility of your Toyota Tacoma. MagnaFlow® exhaust kit #19585 features a built-in No Drone Technology (NDT) resonator, which eliminates unwanted interior noise by cancelling out the natural droning frequencies that your Tacoma produces at highway speeds. MagnaFlow®’s NDT resonator does all this while retaining the characterful exhaust tone of your truck’s motor. Each #19585 exhaust system was engineered with the most popular bolt-on modifications in mind, making compatibility and seamless integration into your existing rig a breeze. CNC precision robotic manufacturing allows for perfect fitment and hassle-free, bolt-on installation. Each exhaust kit features durable 100% stainless steel construction backed by MagnaFlow®’s limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow® 3rd Gen Toyota Tacoma Overland Series™ Cat-Back Performance Exhaust System #19583 brings MagnaFlow®’s signature deep rumble and dyno-proven performance to your overland 3rd generation 2016-2023 Toyota Tacoma. Each exhaust kit’s weight is optimized to improve utility, while the mandrel bent 3” piping and single straight-through muffler are tucked up closer to the body of the vehicle. Together with a no-tip, high-clearance, passenger-side rear exit, these upgrades improve the ground clearance and utility of your Toyota Tacoma. MagnaFlow® exhaust kit #19583 features a built-in No Drone Technology (NDT) resonator, which eliminates unwanted interior noise by cancelling out the natural droning frequencies that your Tacoma produces at highway speeds. MagnaFlow®’s NDT resonator does all this while retaining the characterful exhaust tone of your truck’s motor. Each #19583 exhaust system was engineered with the most popular bolt-on modifications in mind, making compatibility and seamless integration into your existing rig a breeze. CNC precision robotic manufacturing allows for perfect fitment and hassle-free, bolt-on installation. Each exhaust kit features durable 100% stainless steel construction backed by MagnaFlow®’s limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow Chevrolet Tahoe/GMC Yukon Street Series Cat-Back Performance Exhaust System #19580 drastically improves your 2021-2026 Chevrolet Tahoe High Country or GMC Yukon Denali by enabling MagnaFlow’s deep signature sound and dyno proven performance to work their magic in improving your driving experience while keeping interior noise in check. Noise control is possible thanks to MagnaFlow’s No Drone Technology (NDT), which uses quarter-wave passive noise cancellation tuned to the specific droning frequency of your Chevrolet Tahoe High Country or GMC Yukon Denali in order to eliminate exhaust drone. NDT was designed to take the most popular bolt-on modifications into consideration. This cat-back exhaust kit features 3” diameter piping, straight-through muffler, quarter-wave resonators, quad split rear exit and black chrome-finished 4” tips for an extra sporty appearance. The exhaust system is made entirely of stainless steel and was designed from the beginning with weight and ground clearance in mind to improve durability and maintain your 2021-2025 Chevrolet Tahoe/GMC Yukon’s utility. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. MagnaFlow stands by the reliability of their products with a limited lifetime warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Ford F-150 D-Fit Muffler Replacement Kit Performance Exhaust System with Muffler #19572 is compatible with all 2015-2024 Ford F-150s, offering enthusiasts an easy way to upgrade their trucks with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install bolt-on solution is designed to clamp on to the stock break points and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. MagnaFlow #19572 is engineered to produce a moderate level of exterior sound, allowing you to enjoy the deep rumble of your truck’s engine while maintaining mild noise levels in the vehicle’s interior. The exhaust kit utilizes mandrel bent 3” tubing and is produced using CNC precision robotic manufacturing techniques. Each exhaust system features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.

• Maintains The OEM Piping And Tailpipe
• Mandrel Bent Stainless Steel Tubing
• 409 Stainless Steel Construction

This Part Fits:

The MagnaFlow Street Series Cat-Back Performance Exhaust System #19563 works seamlessly with all 2015-2023 and 2021+ engine variants of the Ford F-150. Enjoy the newly aggressive sound of your truck's motor with MagnaFlow's deep signature exhaust note and dyno proven performance improvements that can be heard and felt from the exterior of your truck to its interior. MagnaFlow #19563 features durable 100% stainless steel construction, a single straight-through muffler, 3" mandrel bent tubing and dual passenger-side exit before the rear tire with 3.5" polished tips. The latest CNC precision robotic manufacturing techniques are used to ensure that the exhaust kit's direct-fit design bolts on easily to enable hassle-free installation.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Street Series Cat-Back Performance Exhaust System #19562 is compatible with all 2021-2026 engine variants of the Ford F-150. Enjoy the newly aggressive sound of your truck’s motor, enhanced with MagnaFlow’s deep signature exhaust tone and dyno proven performance improvements, all while maintaining only moderate levels of interior noise. MagnaFlow #19562 features durable 100% stainless steel construction, a single straight-through muffler, 3” mandrel bent tubing and dual-split rear exit 4” tips with black powder-coated finish. Cutting-edge CNC precision robotic manufacturing is used to ensure that the exhaust kit’s direct-fit layout bolts on as intended for easy installation.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Street Series Cat-Back Performance Exhaust System #19561 is compatible with all 2015-2023 and 2021+ engine variants of the Ford F-150. Enhance the sound of your truck's engine with MagnaFlow's deep signature exhaust note and dyno proven performance enhancements while maintaining only mild levels of interior noise. MagnaFlow #19561 features durable 100% stainless steel construction, a single straight-through muffler, 3" mandrel bent tubing, a single polished 4" tip and passenger-side exit. Cutting-edge CNC precision robotic manufacturing is used to ensure that the exhaust kit's direct-fit design bolts on easily for hassle-free installation.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Ford Bronco Street Series Axle-Back Performance Exhaust System #19558 is engineered to make your 2021-2026 Ford Bronco sound as awesome as it looks. Conquer highways and trails alike with ease in your modern body-on-frame SUV thanks to the dyno-tested performance of exhaust kit #19558. Mandrel bent 2.5” main piping channels exhaust gases into a large straight-through muffler before exiting through dual 4” black powder coated tips. The result is a Ford Bronco exhaust system that maintains mild levels of interior sound while allowing for moderate levels of exterior sound, all improved with MagnaFlow’s deep, signature performance exhaust tone. This combination of sound levels brings out the character of your Bronco’s engine both on and off-road without sacrificing interior comfort. CNC precision manufacturing and state-of-the-art 3D scanning techniques guarantee that #19558 has a direct-fit design that will install easily and fit any 2021-2025 Ford Bronco equipped with the 2.7L twin-turbo V6. Exhaust system #19558 features durable stainless-steel construction backed by MagnaFlow’s limited lifetime warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits: