Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
522 products
522 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The MagnaFlow Ford Bronco Street Series Axle-Back Performance Exhaust System #19555 is engineered to make your 2021-2026 Ford Bronco sound as awesome as it looks. Conquer highways and trails alike with ease in your modern body-on-frame SUV thanks to the dyno-tested performance of exhaust kit #19555. Mandrel bent 2.5” main piping channels exhaust gases into a large straight-through muffler before exiting through dual 4” black powder coated tips. The result is an exhaust kit that maintains mild levels of interior sound while allowing for moderate levels of exterior sound, all improved with MagnaFlow’s deep, signature performance exhaust tone. This combination of sound levels brings out the character of your Bronco’s engine both on and off-road without sacrificing interior comfort. CNC precision manufacturing and state-of-the-art 3D scanning techniques guarantee that #19555 has a direct-fit design that will install easily and fit any 2021-2026 Ford Bronco equipped with the 2.3L turbo I-4. Exhaust system #19555 features durable stainless-steel construction backed by MagnaFlow’s limited lifetime warranty.
Installation Instructions- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
The MagnaFlow® Toyota 4Runner Overland Series™ Cat-Back Performance Exhaust System #19546 will enhance your 4.0L V6 Toyota 4Runner (2003-2024) with MagnaFlow®’s renowned deep rumble and dyno-proven performance. MagnaFlow® #19546 is weight optimized for additional utility and designed such that its mandrel bent 2.5” diameter main piping is situated more closely to the body than the stock configuration. This combined with a single high-clearance no-tip, passenger-side rear exhaust exit allows for significantly improved ground clearance and departure angles. MagnaFlow® exhaust system #19546 is compatible with the most popular bolt-on aftermarket modifications and features our No Drone Technology, which cancels out the natural droning frequencies of the V6 Toyota 4Runner at cruising speeds. This allows for a quiet ride on the highway while retaining the character of your rig’s exhaust note. CNC precision robotic manufacturing enables perfect fitment and hassle-free bolt-on installation. The 100% stainless steel construction of exhaust kit #19546 is covered by MagnaFlow®’s limited lifetime construction warranty.
- No-Drone-Technology Allows For A Quiet Cabin
- Dyno Proven Performance
- High clearance exit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2003-2024 | Toyota | 4Runner | Limited |
| 2020-2021 | Toyota | 4Runner | Nightshade |
| 2003-2009 | Toyota | 4Runner | Sport |
| 2003-2024 | Toyota | 4Runner | SR5 |
| 2018-2024 | Toyota | 4Runner | SR5 Premium |
| 2010-2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2024 | Toyota | 4Runner | TRD Off-Road |
| 2018-2024 | Toyota | 4Runner | TRD Off-Road Premium |
| 2015-2024 | Toyota | 4Runner | TRD Pro |
| 2022-2024 | Toyota | 4Runner | TRD Sport |
| 2020-2021 | Toyota | 4Runner | Venture |
The MagnaFlow® Overland Series™ Cat-Back Performance Exhaust System #19544 for the Lexus GX470 (2003-2009), GX460 (2010-2023) and Toyota 4Runner (2003-2009) adds MagnaFlow®’s signature deep tone and dyno-proven performance to your overlanding rig. The weight optimized exhaust system’s mandrel bent 2.5” tubing and single, straight-through muffler are designed to fit higher up in the undercarriage than the stock exhaust configuration. Combined with a single, high-clearance, no-tip, passenger-side exit, these features ensure improved ground clearance and utility. This MagnaFlow® exhaust system was developed with versatility in mind in order to be seamlessly compatible with the most popular bolt-on aftermarket applications. Thanks to MagnaFlow®’s No Drone Technology, exhaust kit #19544 is specifically engineered to bring out the natural character of your rig’s motor while minimizing the natural droning frequencies created at cruising speeds. As a result, this exhaust system is as well-mannered on long drives to overlanding locales as it is excellent at improving off-roading capability with improved ground clearance and departure angles. The durable 100% stainless steel construction and CNC precision robotic manufacturing used by MagnaFlow® #19544 ensures easy bolt-on installation and seamless compatibility, all covered by MagnaFlow®’s limited lifetime construction warranty.
- No-Drone-Technology Allows For A Quiet Cabin
- Dyno Proven Performance
- High clearance exit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2023 | Lexus | GX460 | Base |
| 2023 | Lexus | GX460 | Black Line Edition |
| 2014-2023 | Lexus | GX460 | Luxury |
| 2010-2023 | Lexus | GX460 | Premium |
| 2003-2009 | Lexus | GX470 | Base |
| 2003-2009 | Toyota | 4Runner | Limited |
| 2003-2009 | Toyota | 4Runner | Sport |
| 2003-2009 | Toyota | 4Runner | SR5 |
The MagnaFlow® JK Jeep Wrangler Overland Series™ Cat-Back Performance Exhaust System #19539 will inject your Jeep Wrangler JK Unlimited (2012-2018) with MagnaFlow®’s deep signature sound and dyno-proven performance. MagnaFlow® exhaust kit #19539 is weight optimized for improved utility and features a single straight-through muffler with 2.5” mandrel bent main piping that fits closer to the undercarriage of the vehicle compared to the stock configuration. This combined with a no-tip, high clearance driver side rear exit greatly enhances your JK Jeep Wrangler’s ground clearance and departure angles. The exhaust system was designed to be compatible with the most popular bolt-on aftermarket modifications. Each system incorporates MagnaFlow®’s No Drone Technology, which mitigates interior noise by cancelling out the natural droning frequencies produced by your JK Jeep Wrangler at cruising speeds while retaining the character of your engine’s exhaust note. CNC precision robotic manufacturing techniques enable perfect fitment and allow for hassle-free bolt-on installation. MagnaFlow® #19539 is made entirely of durable stainless steel and backed by MagnaFlow®’s limited lifetime construction warranty.
- No-Drone-Technology Allows For A Quiet Cabin
- Dyno Proven Performance
- High clearance exit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2012-2017 | Jeep | Wrangler | Rubicon |
| 2012-2017 | Jeep | Wrangler | Sahara |
| 2012-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2018 | Jeep | Wrangler | Unlimited Moab |
| 2012-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2012-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2012-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
The MagnaFlow Street Series Cat-Back Performance Exhaust System 19530 brings out the personality of your 7.3L 2020-2023 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19530 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19530 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2026 | Ford | F-250 Super Duty | King Ranch |
| 2020-2026 | Ford | F-250 Super Duty | Lariat |
| 2020-2026 | Ford | F-250 Super Duty | Platinum |
| 2020-2026 | Ford | F-250 Super Duty | XL |
| 2020-2026 | Ford | F-250 Super Duty | XLT |
| 2020-2026 | Ford | F-350 Super Duty | King Ranch |
| 2020-2026 | Ford | F-350 Super Duty | Lariat |
| 2020-2026 | Ford | F-350 Super Duty | Platinum |
| 2020-2026 | Ford | F-350 Super Duty | XL |
| 2020-2026 | Ford | F-350 Super Duty | XLT |
The MagnaFlow 2015-2020 Ford F-150 Street Series Cat-Back Performance Exhaust System 19497 brings out the personality of your 2.7L, 3.5L, 5.0L 2015-2020 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Black Coated Clamp-On Double Wall Angle Cut Cut Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150's to shame. With this system your vehicle will be producing VeryAggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19497 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19497 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
The MagnaFlow 2018-2024 Toyota Camry Street Series Cat-Back Performance Exhaust System 19494 brings out the personality of your 2.5L 2018-2023 Toyota Camry with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Toyota Camry exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Camry's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19494 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19494 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2024 | Toyota | Camry | XSE |
The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19493 offers enthusiasts an easy way to upgrade their 2014-2023 Ram 6.4L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your 6.4L truck and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. 19493?is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3.5in. main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.
Installation Instructions- Maintains The OEM Piping And Tailpipe
- Mandrel Bent Stainless Steel Tubing
- 409 Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2025 | Ram | 2500 | Big Horn |
| 2014-2025 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2014-2021 | Ram | 2500 | Laramie Longhorn |
| 2016-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2014-2015,2019-2025 | Ram | 2500 | Lone Star |
| 2014-2016 | Ram | 2500 | Outdoorsman |
| 2014-2025 | Ram | 2500 | Power Wagon |
| 2023-2025 | Ram | 2500 | Rebel |
| 2014-2018 | Ram | 2500 | SLT |
| 2024-2025 | Ram | 2500 | Special Service |
| 2014-2025 | Ram | 2500 | Tradesman |
| 2014-2025 | Ram | 3500 | Big Horn |
| 2014-2025 | Ram | 3500 | Laramie |
| 2014-2020 | Ram | 3500 | Laramie Longhorn |
| 2016-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2014-2015,2017,2019-2022 | Ram | 3500 | Lone Star |
| 2014-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2014-2025 | Ram | 3500 | Tradesman |
The MagnaFlow 2020-2023 Jeep Gladiator Street Series Cat-Back Performance Exhaust System 19487 brings out the personality of your 3.6L 2020-2023 Jeep Gladiator with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Rolled Edge tips, this Jeep Gladiator exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Gladiator's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19487 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19487 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025 | Chevrolet | Silverado 1500 | High Country |
| 2025 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2025 | Chevrolet | Silverado 1500 | LTZ |
| 2025 | Chevrolet | Silverado 1500 | RST |
| 2025 | GMC | Sierra 1500 | AT4 |
| 2025 | GMC | Sierra 1500 | Denali |
| 2025 | GMC | Sierra 1500 | Denali Ultimate |
| 2025 | GMC | Sierra 1500 | SLT |
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
The MagnaFlow 2020-2023 Jeep Gladiator Rock Crawler Series Cat-Back Performance Exhaust System 19486 brings superior boulder-climbing capabilities to your 3.6L 2020-2023 Jeep Gladiator with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 19486 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep Gladiator exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 19486's emissions-legal cat-back design replaces all your rig's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 19486 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.
- Extensive Off-Road Testing To Meet Your Sound And Performance Needs
- Aggressive Exterior Sound Tuning
- High clearance design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler 19440 19440 replaces the restrictive factory muffler of your Truck with fast-flowing mandrel bent 3in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19440 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system's durable, corrosion resistant stainless steel construction is backed by MagnaFlow's limited lifetime warranty.
Installation InstructionsInstallation Instructions
- Maintains The OEM Piping And Tailpipe
- Mandrel Bent Stainless Steel Tubing
- 409 Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2011-2018 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2014 | Ram | 1500 | HFE |
| 2011-2018 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2018 | Ram | 1500 | Laramie Longhorn |
| 2015-2018 | Ram | 1500 | Limited |
| 2014-2018 | Ram | 1500 | Lone Star |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2018 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2018 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2023 | Ram | 1500 Classic | Special Service |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2019-2024 | Ram | 1500 Classic | Warlock |
The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler 19439 replaces the restrictive factory muffler of your Truck with fast-flowing mandrel bent 3in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19439 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system's durable, corrosion resistant stainless steel construction is backed by MagnaFlow's limited lifetime warranty.
Installation Instructions- Maintains The OEM Piping And Tailpipe
- Mandrel Bent Stainless Steel Tubing
- 409 Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2011-2018 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2014 | Ram | 1500 | HFE |
| 2011-2018 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2018 | Ram | 1500 | Laramie Longhorn |
| 2015-2018 | Ram | 1500 | Limited |
| 2014-2018 | Ram | 1500 | Lone Star |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2018 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2018 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2023 | Ram | 1500 Classic | Special Service |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2019-2024 | Ram | 1500 Classic | Warlock |
The MagnaFlow 2019-2023 Ram 1500 D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19433 offers enthusiasts an easy way to upgrade their 2019-2023 Ram 1500 5.7L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your 5.7L truck and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. 19433?is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3in. main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.
Installation Instructions- Maintains The OEM Piping And Tailpipe
- Mandrel Bent Stainless Steel Tubing
- 409 Stainless Steel Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2020 | Ram | 1500 | Tradesman |
The MagnaFlow 2019-2024 Ram 1500 Street Series Cat-Back Performance Exhaust System 19430 brings out the personality of your 5.7L 2019-2023 Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 5in. Black Coated Welded-On Double Wall Angle Cut Rolled Edge tips, this Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ram 1500's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19430 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19430 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2019-2020,2024 | Ram | 1500 | Tradesman |
The MagnaFlow 2019-2024 Ram 1500 Street Series Cat-Back Performance Exhaust System 19429 brings out the personality of your 5.7L 2019-2023 Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ram 1500's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19429 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19429 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2019-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2024 | Ram | 1500 | Rebel |
| 2019-2020,2024 | Ram | 1500 | Tradesman |
The MagnaFlow Ford Expedition Street Series 19424 brings out the personality of your 3.5L 2018-2024 Ford Expedition with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and a straight-through muffler ending in a single passenger side rear exit with a 4in. polished welded-double wall-angle cut-rolled edge tip, this Ford Expedition exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Expedition’s to shame. With this system your vehicle will be producing moderate exterior and mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19424 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19424 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2024 | Ford | Expedition | King Ranch |
| 2018-2024 | Ford | Expedition | Limited |
| 2020-2024 | Ford | Expedition | Max King Ranch |
| 2018-2024 | Ford | Expedition | Max Limited |
| 2018-2024 | Ford | Expedition | Max Platinum |
| 2018-2024 | Ford | Expedition | Max SSV |
| 2018-2019,2022 | Ford | Expedition | Max XL |
| 2018-2024 | Ford | Expedition | Max XLT |
| 2018-2024 | Ford | Expedition | Platinum |
| 2018-2024 | Ford | Expedition | SSV |
| 2022-2024 | Ford | Expedition | Timberline |
| 2018-2019,2022 | Ford | Expedition | XL |
| 2023-2024 | Ford | Expedition | XL STX |
| 2018-2024 | Ford | Expedition | XLT |
The MagnaFlow 2007-2024 Nissan TITAN Street Series Cat-Back Performance Exhaust System 19421 brings out the personality of your 5.6L 2007-2023 Nissan TITAN with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Nissan TITAN exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Nissan TITAN's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19421 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19421 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2010 | Nissan | TITAN | LE |
| 2017-2024 | Nissan | TITAN | Platinum Reserve |
| 2008-2015,2017-2024 | Nissan | TITAN | PRO-4X |
| 2011-2015,2017-2023 | Nissan | TITAN | S |
| 2007-2010 | Nissan | TITAN | SE |
| 2011-2015,2017-2021 | Nissan | TITAN | SL |
| 2011-2015,2017-2024 | Nissan | TITAN | SV |
| 2007-2010 | Nissan | TITAN | XE |
| 2022 | Nissan | TITAN XD | Platinum Reserve |
| 2022 | Nissan | TITAN XD | PRO-4X |
| 2022 | Nissan | TITAN XD | S |
| 2022 | Nissan | TITAN XD | SV |
The MagnaFlow 2018-2024 Toyota Camry Street Series Cat-Back Performance Exhaust System 19411 brings out the personality of your 3.5L 2018-2023 Toyota Camry with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Toyota Camry exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Camry's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19411 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19411 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2019 | Toyota | Camry | XLE |
| 2018-2024 | Toyota | Camry | XSE |
The MagnaFlow 2018-2024 Toyota Camry Street Series Cat-Back Performance Exhaust System 19410 brings out the personality of your 2.5L 2018-2023 Toyota Camry with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Toyota Camry exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Camry's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19410 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19410 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2019 | Toyota | Camry | Hybrid LE |
| 2018-2019 | Toyota | Camry | Hybrid SE |
| 2018-2019 | Toyota | Camry | Hybrid XLE |
| 2018-2019 | Toyota | Camry | L |
| 2018-2019 | Toyota | Camry | LE |
| 2018-2024 | Toyota | Camry | SE |
| 2020-2024 | Toyota | Camry | SE Nightshade |
| 2018-2019 | Toyota | Camry | XLE |
| 2018-2019 | Toyota | Camry | XSE |
The MagnaFlow 2018-2021 Kia Stinger Competition Series Cat-Back Performance Exhaust System 19405 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 2.0L 2018-2021 Kia Stinger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 4 Straight-Through;Tuned Chamber mufflers ending in a Quad Split Rear exit featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 19405 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19405's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive exterior sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2019 | Kia | Stinger | Base |
| 2020-2021 | Kia | Stinger | GT-Line |
| 2018-2019 | Kia | Stinger | Premium |
The MagnaFlow 2018-2019 Audi A5 Sportback Sport Series Cat-Back Performance Exhaust System 19390 enhances your 2.0L 2018-2019 Audi A5 Sportback with an aggressive character that is sure to help you stand out from the other Audi A5 Sportback you encounter on the street. With its 3in. diameter fast-flowing mandrel bent main piping that passes through 2 Straight-Through mufflers before ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this dyno-proven Audi A5 Sportback exhaust system refuses to be ignored. As such, 19390 is tuned to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels, so please check to ensure compliance with local noise regulations. The system's cat-back design replaces all your import's stock exhaust components from the catalytic converter on back. Extensive 3D scanning and CNC precision robotic manufacturing techniques are used to ensure that your exhaust system fits perfectly with just a simple do-it-yourself installation process. The durable, corrosion resistant stainless steel construction of 19390 is backed by MagnaFlow's limited lifetime warranty.
- High-Performance Lightweight Design
- Dyno Proven Performance
- Dyno-proven performance
- Racing inspired sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2019 | Audi | A5 Quattro | Premium |
| 2018-2019 | Audi | A5 Quattro | Premium Plus |
| 2018-2019 | Audi | A5 Quattro | Prestige |
| 2018-2019 | Audi | A5 Sportback | Premium |
| 2018-2019 | Audi | A5 Sportback | Premium Plus |
| 2018-2019 | Audi | A5 Sportback | Prestige |
MagnaFlow combines aggressive sound, free-flowing power and additional ground clearance for the best Jeep performance on and offroad. Features Black coated tips. MagnaFlow Performance Exhaust System Kit 19388 is made of durable stainless steel and built using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime construction warranty and 1 year finish warranty.
Installation Instructions- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
The MagnaFlow 2018-2024 Jeep Wrangler Street Series Axle-Back Performance Exhaust System 19385 brings enhanced engine sound and dyno-proven performance to your 2.0L, 3.6L 2018-2024 Jeep Wrangler with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep Wrangler exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep Wrangler's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19385 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Installation Instructions- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
The MagnaFlow 2017-2021 Honda Civic Street Series Cat-Back Performance Exhaust System 19373 brings out the personality of your 1.5L 2017-2021 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Dual Center Rear exit with 4.5in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19373 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19373 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017 | Honda | Civic | EX |
| 2017 | Honda | Civic | EX-L |
| 2017 | Honda | Civic | EX-T |
| 2017 | Honda | Civic | LX |
| 2017 | Honda | Civic | Si |
| 2017-2021 | Honda | Civic | Sport |
| 2017 | Honda | Civic | Touring |
The MagnaFlow 2015-2023 Dodge Charger Competition Series Cat-Back Performance Exhaust System 19371 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 5.7L, 6.2L, 6.4L 2015-2023 Dodge Charger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 19371 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19371's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive exterior sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2022 | Dodge | Challenger | R/T |
| 2017-2018 | Dodge | Challenger | R/T 392 |
| 2016,2022 | Dodge | Challenger | R/T Scat Pack |
| 2022 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2015 | Dodge | Challenger | Scat Pack |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2018 | Dodge | Challenger | SRT Demon |
| 2015-2018,2022 | Dodge | Challenger | SRT Hellcat |
| 2022 | Dodge | Challenger | SRT Hellcat Redeye |
| 2022 | Dodge | Challenger | SRT Hellcat Redeye Widebody |
| 2022 | Dodge | Challenger | SRT Hellcat Widebody |
| 2022 | Dodge | Challenger | SRT Super Stock |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2017-2018 | Dodge | Charger | Daytona |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2017-2023 | Dodge | Charger | Pursuit |
| 2017-2023 | Dodge | Charger | R/T |
| 2017-2018 | Dodge | Charger | R/T 392 |
| 2015-2018 | Dodge | Charger | R/T Scat Pack |
| 2019-2023 | Dodge | Charger | Scat Pack |
| 2020 | Dodge | Charger | Scat Pack 392 Widebody |
| 2022-2023 | Dodge | Charger | Scat Pack Widebody |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2015-2020 | Dodge | Charger | SRT Hellcat |
| 2021-2023 | Dodge | Charger | SRT Hellcat Redeye Widebody |
| 2023 | Dodge | Charger | SRT Hellcat Redeye Widebody Jailbreak |
| 2020-2023 | Dodge | Charger | SRT Hellcat Widebody |
| 2023 | Dodge | Charger | SRT Hellcat Widebody Jailbreak |
| 2022 | Dodge | Charger | SRT Jailbreak |
The MagnaFlow 2015-2023 Dodge Challenger Competition Series Cat-Back Performance Exhaust System 19367 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 5.7L, 6.2L, 6.4L 2015-2023 Dodge Challenger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 19367 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19367's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive exterior sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2023 | Dodge | Challenger | R/T |
| 2017-2019 | Dodge | Challenger | R/T 392 |
| 2016-2023 | Dodge | Challenger | R/T Scat Pack |
| 2021 | Dodge | Challenger | R/T Scat Pack Shaker Widebody |
| 2019-2023 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2015 | Dodge | Challenger | Scat Pack |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2018 | Dodge | Challenger | SRT Demon |
| 2023 | Dodge | Challenger | SRT Demon 170 |
| 2015-2022 | Dodge | Challenger | SRT Hellcat |
| 2023 | Dodge | Challenger | SRT Hellcat Jailbreak |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Redeye |
| 2023 | Dodge | Challenger | SRT Hellcat Redeye Jailbreak |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Redeye Widebody |
| 2023 | Dodge | Challenger | SRT Hellcat Redeye Widebody Jailbreak |
| 2018-2022 | Dodge | Challenger | SRT Hellcat Widebody |
| 2023 | Dodge | Challenger | SRT Hellcat Widebody Jailbreak |
| 2022 | Dodge | Challenger | SRT Jailbreak |
| 2020-2023 | Dodge | Challenger | SRT Super Stock |
| 2017-2018 | Dodge | Challenger | T/A |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2021 | Dodge | Challenger | T/A 392 Widebody |
The MagnaFlow 2016-2020 Honda Civic Street Series Cat-Back Performance Exhaust System 19365 brings out the personality of your 1.5L 2016-2020 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19365 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19365 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2020 | Honda | Civic | EX-L |
| 2016-2018 | Honda | Civic | EX-T |
| 2017-2020 | Honda | Civic | LX |
| 2016-2020 | Honda | Civic | Touring |
The MagnaFlow Street Series Cat-Back Performance Exhaust System 19351 brings out the personality of your 6.2L 2017-2022 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19351 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19351 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
The MagnaFlow Street Series Cat-Back Performance Exhaust System 19327 brings out the personality of your 3.6L 2012-2018 Jeep with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19327 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19327 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2012-2017 | Jeep | Wrangler | Rubicon |
| 2012-2017 | Jeep | Wrangler | Sahara |
| 2012-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2012-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2012-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2012-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
The MagnaFlow 2016-2020 Honda Civic Street Series Cat-Back Performance Exhaust System 19313 brings out the personality of your 2.0L 2016-2020 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19313 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19313 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Honda | Civic | EX |
| 2016-2020 | Honda | Civic | LX |
| 2016-2018 | Honda | Civic | LX-P |
| 2019-2020 | Honda | Civic | Sport |
| 2017-2018,2020 | Honda | Civic | Type R |
Showing 270/522
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.