This Method Race Wheels Beadlock Spacer Kit is designed to provide the necessary clearance for tires with thicker-than-standard beads. By installing these spacers between the wheel and the beadlock ring, you ensure proper clamping force and prevent the ring from "coning" or bottoming out against the wheel surface during installation.

Each spacer is precision-machined from high-grade 6061 aluminum for exceptional durability and corrosion resistance in off-road environments. This kit is a direct fit for 15-inch Method beadlock wheels and provides 3/16-inch of additional spacing to maintain optimal tire retention and seal integrity.

• Material: Machined 6061 Aluminum
• Thickness: 3/16 inch (4.76mm)
• Compatibility: Designed for 15-inch beadlock wheels
• Quantity: 4-piece kit (Set of 4 spacers)
• Manufacturer Part Number: SK-SPC15316

Fits select Mercedes-Benz Sprinter and Ford Transit dually vans.

The Method MR901 Dually Rear Wheel is engineered specifically for heavy-duty applications on high-roof and extended-wheelbase vans. Built from solid A356 aluminum with a T6 heat treatment, this wheel utilizes Method's iconic 12-window design to provide superior structural integrity for demanding work or overland use. With a maximum payload rating of up to 3,300 lbs, the MR901 delivers the strength needed for fully-loaded builds without sacrificing the classic Method Race Wheels aesthetic.

• Iconic 12-window design with debossed Method logos
• Solid A356 aluminum construction with T6 heat treatment
• Screw-on center cap with embossed Method logo
• Matte Black finish for maximum durability and corrosion resistance
• Payload rating: 3,000-3,300 lbs
• Center Bore: 161.04mm
• Offset: -138mm
• Manufacturer Part Number: MR901655925138N
• Industry-best lifetime manufacturer structural warranty

Note: An aftermarket lug nut kit is required for installation on Mercedes Sprinter vans.

Fits select 6-lug Mercedes-Benz Sprinter and Ford Transit dually models.

The Method Race Wheels MR901 Dually Front wheel is engineered specifically for the high-demand requirements of heavy-duty Mercedes Sprinter and Ford Transit van applications. Whether utilized for hauling equipment or overland excursions, this wheel provides the structural integrity needed for high-payload vehicles. Constructed from solid A356 aluminum with a T6 heat treatment, the MR901 features Method's iconic 12-window design with debossed logos and a durable matte black finish.

• Construction: Solid A356 aluminum with T6 heat treatment
• Design: Iconic 12-window pattern with debossed Method logos
• Payload Rating: High-strength 3,000–3,300 lbs capacity
• Center Cap: Screw-on cap with embossed Method logo
• Application: Front-specific dually fitment
• Installation: Aftermarket lug nut kit required for Mercedes Sprinter models
• Warranty: Manufacturer's lifetime structural warranty
• Manufacturer Part Number: MR901655925117

The Method MR707 Bead Grip wheel brings rally-inspired engineering to heavy-duty trucks and SUVs. This multi-spoke wheel (MPN: MR70789087518) features patented Bead Grip technology, which utilizes integrated grooves to engage the tire bead for increased security during low-pressure operation. Constructed from solid A356 aluminum with T6 heat treatment, it provides exceptional load ratings and durability for off-road use.

The design incorporates an aggressive safety hump on the bead seats to further prevent debeading and a reinforced inner lip adapted from Method’s race wheel series. This 18x9 wheel is finished in matte black and includes a specialized push-through center cap designed for 8-lug applications.

• Patented Bead Grip technology for superior tire security at low pressures
• Solid A356 aluminum construction with T6 heat treatment
• Rally-inspired multi-spoke design with debossed Method logo
• Aggressive safety hump and reinforced inner lip for maximum structural integrity
• Size: 18x9 | Bolt Pattern: 8x170 | Offset: +18mm
• Backspacing: 5.7in | Center Bore: 130.81mm
• Includes push-through center cap for 8-lug fitment
• Manufacturer Part Number: MR70789087518

The Method MR707 Bead Grip wheel brings rally-proven engineering to trucks and SUVs. Built from solid A356 aluminum with T6 heat treatment, the MR707 is designed for extreme durability and high load ratings. This wheel features Method's patented Bead Grip® technology, which utilizes an aggressive safety hump on the bead seats to secure the tire bead more effectively than a standard wheel, allowing for increased stability and security when running lower tire pressures off-road.

• Patented Bead Grip® technology for unrivaled tire security at low PSI
• Solid A356 aluminum construction with T6 heat treatment
• Iconic rally-inspired multi-spoke design with debossed Method logo
• Aggressive safety hump on bead seats to prevent debeading
• Reinforced inner lip derived from MRW race wheels for maximum strength
• Snap-in center cap with embossed Method logo
• Lifetime manufacturer's structural warranty

Specifications:
Manufacturer Part Number: MR70789060500
Size: 18x9
Offset: +0mm
Bolt Pattern: 6x5.5
Center Bore: 106.25mm
Backspacing: 5in
Finish: Matte Black

The Method MR707 Bead Grip wheel adapts rally-proven design for modern trucks, SUVs, and CUVs. Engineered with Method Race Wheels' patented Bead Grip technology, this wheel features integrated grooves in the bead seat to engage the tire bead for increased security at lower air pressures—bridging the gap between a standard street wheel and a heavy beadlock. This 18x8.5 wheel is built for durability, featuring a reinforced inner lip derived from off-road racing applications to increase strength and impact resistance.

Constructed from high-grade A356 aluminum with T6 heat treatment, the MR707 boasts a high load rating and structural integrity. An aggressive safety hump on the bead seats further stabilizes the tire bead to prevent debeading during technical off-road maneuvers.

• Series: MR707 Bead Grip
• Size: 18x8.5
• Bolt Pattern: 5x4.5 (5x114.3)
• Offset: +38mm
• Backspacing: 6.2in
• Center Bore: 73mm
• Finish: Matte Black with debossed Method logo
• Material: A356-T6 Heat-Treated Aluminum
• Hardware: Includes snap-in center cap with embossed logo
• MPN: MR70788512538

The Method Race Wheels MR707 brings a rally-inspired multi-spoke design to trucks and SUVs, utilizing exclusive Bead Grip® technology for maximum tire security at low pressures. Built from high-strength A356 aluminum with a T6 heat treatment, the MR707 features a reinforced inner lip derived from Method's race series to withstand heavy off-road impacts. The aggressive safety hump profile on the bead seats further stabilizes the tire, making this an ideal choice for technical terrain and aired-down adventures.

• Series: MR707 (Bahia Blue Finish)
• Wheel Size: 17x8.5
• Bolt Pattern: 6x5.5
• Offset: 0mm
• Backspacing: 4.72in
• Hub Bore: 106.25mm
• Construction: Solid A356 aluminum with T6 heat treatment
• Technology: Patented Bead Grip® technology to prevent debeading
• Features: Reinforced inner lip, debossed Method logo, snap-in center cap
• Part Number: MR70778560600

Each wheel includes a snap-in center cap with an embossed Method logo. For 8-lug applications, this wheel utilizes a push-through center cap design for a secure fit and clean aesthetic.

The Method MR707 Bead Grip wheel brings rally-inspired engineering to trucks and SUVs. Utilizing patented Bead Grip® technology, this wheel provides increased tire security at low air pressures by engaging the tire bead with an aggressive safety hump. Constructed from solid A356 aluminum with T6 heat treatment, the MR707 features a reinforced inner lip derived from Method’s off-road race wheels for superior structural integrity.

• Patented Bead Grip® technology for tire security at reduced PSI
• Solid A356 aluminum construction with T6 heat treatment
• Aggressive safety hump on bead seats helps prevent debeading
• Reinforced inner lip increases strength for off-road use
• Classic multi-spoke rally design with debossed Method logo
• Snap-in center cap with embossed logo included
• Load Rating: Ultra-strong ratings for truck and SUV applications
• Manufacturer Part Number: MR70778560525

The Method Race Wheels MR707 Bead Grip series brings rally-inspired performance to trucks, SUVs, and CUVs. Utilizing exclusive Bead Grip® technology, this wheel provides superior tire security by engaging the tire bead even when running lower air pressures on technical terrain. Constructed from solid A356 aluminum with T6 heat treatment, the MR707 is engineered for high load ratings and long-term durability in off-road environments.

• Iconic multi-spoke rally design with debossed Method logo
• Patented Bead Grip® technology increases tire security at low PSI
• Aggressive safety hump on bead seats further stabilizes the tire seat
• Reinforced inner lip derived from Method race wheels for increased strength
• High-strength solid A356 aluminum construction with T6 heat treatment
• Matte black finish for superior corrosion resistance and style
• Snap-in center cap with embossed Method logo
• Lifetime manufacturer's structural warranty
• Part Number: MR70778560500

Specifications: 17x8.5 wheel size, 0mm offset, 6x5.5 (6x139.7) bolt pattern, 106.25mm center bore, and 4.72-inch backspacing.

The Method Race Wheels MR707 brings rally-inspired performance to trucks and SUVs, drawing from the design of the MR407 UTV wheel. Featuring patented Bead Grip® technology, this wheel is engineered to secure the tire bead even at significantly reduced air pressures. This increases the tire's contact patch for superior off-road traction while maintaining security against debeading via an aggressive safety hump profile.

Constructed from solid A356 aluminum with T6 heat treatment, the MR707 is built for high load ratings and heavy-duty use. It incorporates a reinforced inner lip derived from Method's race wheels to increase structural strength against impacts. The iconic multi-spoke design is finished in a durable matte black with a debossed Method logo.

• Model: MR707 Bead Grip
• Part Number: MR70778516500
• Size: 17x8.5
• Bolt Pattern: 6x135
• Offset: 0mm
• Backspacing: 4.72in
• Center Bore: 87mm
• Material: A356-T6 Aluminum
• Finish: Matte Black
• Included: Snap-in center cap with embossed Method logo

The Method MR707 Bead Grip wheel brings competition-proven rally design to trucks and SUVs. Utilizing exclusive Bead Grip technology, this wheel features an aggressive safety hump on the bead seats to stabilize the tire and prevent debeading, allowing for significantly lower tire pressures during off-road use. The MR707 is engineered from solid A356 aluminum with T6 heat treatment and features a reinforced inner lip derived from Method Race Wheels' off-road race wheels for maximum structural integrity.

• Part Number: MR70777563550
• Size: 17x7.5
• Bolt Pattern: 6x130
• Offset: 50mm
• Backspacing: 6.2in
• Center Bore: 84.1mm
• Finish: Matte Black
• Construction: A356 aluminum with T6 heat treatment
• Bead Grip technology for increased tire security at low PSI
• Iconic multi-spoke rally design with debossed Method logo
• Reinforced inner lip for high load ratings and durability
• Includes snap-in center cap with embossed logo
• Industry-leading lifetime manufacturer structural warranty

The Method MR705 Bead Grip wheel is engineered for demanding off-road environments, featuring a bold split 5-spoke, 10-window design that balances aesthetic appeal with structural integrity. Utilizing patented Bead Grip technology, this wheel allows for aggressive tire deflation down to pressures that traditionally required mechanical beadlocks, ensuring the tire remains seated during low-PSI trail runs and overland expeditions.

Constructed from solid A356 aluminum with a T6 heat treatment, the MR705 includes a reinforced inner lip derived from Method’s race-series wheels to resist deformation in high-impact scenarios. An aggressive safety hump on the bead seats provides additional security against de-beading while navigating rough terrain. This wheel is finished in a durable matte black and includes a snap-in center cap with the embossed Method logo.

• Size: 18x9
• Offset: +18mm
• Bolt Pattern: 6x5.5 (6x139.7)
• Center Bore: 106.25mm
• Material: T6 heat-treated A356 aluminum
• Technology: Patented Bead Grip for low-pressure tire security
• Finish: Matte Black
• Manufacturer Part Number: MR70589060518
• Warranty: Lifetime manufacturer's structural warranty

The Method Race Wheels MR705 Bead Grip wheel is engineered for technical trail performance and overlanding. Featuring a bold split 5-spoke, 10-window design, this wheel utilizes patented Bead Grip technology to engage the tire bead, allowing for lower tire pressures during off-road use without the complexity or weight of a traditional beadlock system. Constructed from solid A356 aluminum with a T6 heat treatment, the MR705 is built to withstand the rigors of desert racing and rugged exploration.

• Solid A356 aluminum construction with T6 heat treatment
• Patented Bead Grip technology for secure tire seating at low pressures
• Aggressive safety hump on bead seats to prevent debeading
• Reinforced inner lip derived from MRW race wheels for increased strength
• Durable Matte Black finish with a debossed Method logo on the wheel face
• Snap-in center cap with embossed Method logo
• Manufacturer Part Number: MR70589060500

• Diameter: 18in
• Width: 9in
• Bolt Pattern: 6x5.5 (6x139.7mm)
• Offset: 0mm
• Center Bore: 106.25mm

The Method Race Wheels MR705 Titanium wheel is engineered for technical trails and overland exploration. Featuring a bold split 5-spoke, 10-window design, this wheel integrates Method’s patented Bead Grip® technology. This innovative bead seat design increases grip between the wheel and tire bead, allowing for lower tire pressures during off-road use without the maintenance or weight of a traditional beadlock system.

Built for durability in harsh environments, the MR705 is constructed from solid A356 aluminum with a T6 heat treatment. The inner lip is reinforced with a profile derived from Method’s race-proven wheel lines to increase structural strength against impacts. This model features a clean titanium finish and a debossed Method logo on the wheel face.

• Manufacturer Part Number: MR70578560800
• Diameter: 17in
• Width: 8.5in
• Bolt Pattern: 6x5.5 (6x139.7mm)
• Offset: 0mm
• Center Bore: 106.25mm
• Material: A356 aluminum with T6 heat treatment
• Patented Bead Grip® technology for low-pressure security
• Reinforced inner lip derived from MRW race wheels
• Includes snap-in center cap with embossed Method logo

The Method Race Wheels MR705 features patented Bead Grip® technology, engineered to bridge the gap between a conventional street wheel and a mechanical beadlock. This 17x8.5 wheel is designed for overland exploration and desert trails, allowing for secure tire seating even at low pressures that would typically require a beadlock system.

• Solid A356 aluminum construction with T6 heat treatment for maximum durability
• Patented Bead Grip® technology engages the tire bead for increased grip at low air pressures
• Aggressive safety hump on bead seats helps prevent debeading during off-road maneuvers
• Reinforced inner lip derived from Method's race wheels for superior structural strength
• Split 5-spoke, 10-window design with a debossed Method logo on the wheel face
• Snap-in center cap with embossed Method logo included
• Industry-leading lifetime manufacturer structural warranty
• Specifications: 17x8.5 size, 6x5.5 bolt pattern, +35mm offset, 106.25mm center bore
• Manufacturer Part Number: MR70578560535

The Method Race Wheels MR705 series is engineered for the rigors of overlanding and desert racing, featuring a robust split 5-spoke, 10-window design with a debossed Method logo. Built from solid A356 aluminum with a T6 heat treatment, this wheel incorporates patented Bead Grip® technology. This innovation utilizes integrated grooves in the bead seat and an aggressive safety hump to engage the tire bead, allowing for significantly lower tire pressures during off-road use without the weight or maintenance of a traditional beadlock system.

• Patented Bead Grip® technology for increased tire security at low PSI
• Solid A356 aluminum construction with T6 heat treatment
• Reinforced inner lip derived from MRW race wheel designs for maximum strength
• Aggressive safety hump on bead seats helps prevent debeading
• Snap-in center cap with embossed Method logo
• Size: 17x8.5 | Bolt Pattern: 6x5.5 | Offset: 0mm | Hub Bore: 106.25mm
• Manufacturer Part Number: MR70578560500
• Lifetime manufacturer structural warranty

The Method Race Wheels MR705 Bead Grip series is engineered for the rigors of overlanding and technical off-road trails. Featuring a bold split 5-spoke, 10-window design, this wheel incorporates patented Bead Grip® technology. This innovation allows for significant tire deflation to pressures that typically require mechanical beadlock wheels, ensuring the tire remains seated on the rim during low-pressure operation.

Constructed from solid A356 aluminum with a T6 heat treatment, the MR705 is built for maximum durability. It features a reinforced inner lip derived from Method’s race wheels to increase structural integrity in harsh environments. The titanium finish provides a rugged, premium look with a debossed Method logo on the wheel face.

• Model: MR705 Bead Grip
• Size: 17x8.5
• Offset: +35mm
• Bolt Pattern: 5x150
• Center Bore: 110.5mm
• Finish: Titanium
• Material: A356-T6 aluminum
• Features: Patented Bead Grip® technology, aggressive safety humps, and reinforced inner lip
• Includes: Snap-in center cap with embossed Method logo
• Part Number: MR70578558835

The Method Race Wheels MR705 Bead Grip series is engineered for the rigors of overlanding and technical off-roading, featuring a bold split 5-spoke, 10-window design. Built for those who demand performance in desert and trail environments, this wheel utilizes patented Bead Grip technology. This system uses aggressive safety humps on the bead seats and integrated grooves to secure the tire bead, allowing for significantly lower tire pressures during air-down situations that would otherwise require heavy mechanical beadlocks.

Construction consists of high-strength A356 aluminum subjected to T6 heat treatment for maximum durability. The reinforced inner lip is a design carry-over from Method's race-proven wheel lines, specifically intended to increase structural integrity against heavy impacts. This MR705 features a clean Titanium finish and includes a snap-in center cap with the embossed Method logo.

• Part Number: MR70578550800
• Series: MR705 Bead Grip
• Size: 17x8.5
• Bolt Pattern: 5x5
• Offset: 0mm
• Center Bore: 71.5mm
• Material: T6 Heat-Treated A356 Aluminum
• Finish: Titanium
• Design: Split 5-Spoke with 10-Window Profile
• Hardware: Snap-in center cap included
• Warranty: Lifetime manufacturer structural warranty

The Method Race Wheels MR705 Bead Grip® wheel is engineered for demanding off-road environments, from technical trails to high-speed desert runs. Featuring a split 5-spoke, 10-window design with a debossed Method logo, this wheel utilizes patented Bead Grip® technology to engage the tire bead at lower pressures, providing increased traction without the weight or maintenance of a traditional beadlock.

Constructed from solid A356 aluminum with T6 heat treatment, the MR705 is built for maximum durability. It incorporates a reinforced inner lip derived from Method’s race wheels to increase structural rigidity, while an aggressive safety hump on the bead seats further protects against debeading during low-psi maneuvers.

• Series: MR705 Bead Grip®
• Part Number: MR70578550500
• Size: 17x8.5
• Bolt Pattern: 5x5
• Offset: 0mm
• Center Bore: 71.5mm
• Material: A356 aluminum with T6 heat treatment
• Finish: Matte Black
• Included: Snap-in center cap with embossed Method logo
• Warranty: Lifetime manufacturer's structural warranty

The Method Race Wheels MR704 HD Bead Grip® wheel combines a timeless 12-spoke aesthetic with heavy-duty engineering designed for off-roaders and overland rigs carrying significant payloads. This HD series wheel features a 4,500 lbs load rating, constructed from solid A356 aluminum with T6 heat treatment for maximum structural integrity. The integrated Bead Grip® technology utilizes patented grooves to engage the tire bead, allowing for secure low-pressure operation that traditionally required heavy, high-maintenance beadlock wheels.

• Bead Grip® Technology: Patented grooves engage the tire bead for increased grip at low air pressures and includes an aggressive safety hump to prevent de-beading.
• Heavy Duty (HD) Build: Engineered for high-payload vehicles with a reinforced inner lip derived from MRW race wheels to increase impact resistance.
• Durable Construction: Solid A356 aluminum with T6 heat treatment for a 4,500 lbs load capacity.
• Premium Finish: Matte black coating with a debossed Method logo and a push-through center cap featuring an embossed logo.
• Specifications: 17x9 size, 8x180 bolt pattern, +18mm offset, and 130.81mm center bore.
• Warranty: Manufacturer's lifetime structural warranty.

Manufacturer Part Number: MR70479088518H

The Method MR704 HD (Heavy Duty) series combines a classic 12-spoke aesthetic with the structural integrity required for high-payload applications. Engineered for off-roaders who haul heavy gear or tow, this wheel (MPN: MR70479087518H) features a massive 4,500-pound load rating and utilizes Method’s patented Bead Grip® technology. This design allows for significantly lower tire pressures during trail use, providing traction levels previously reserved for beadlock wheels while remaining street-legal.

Constructed from solid A356 aluminum with T6 heat treatment, the MR704 HD incorporates a reinforced inner lip derived from Method's race-proven designs. An aggressive safety hump on the bead seats further secures the tire to prevent debeading under heavy lateral loads or low-PSI operation. The wheel is finished in a durable matte black and includes a push-through center cap with the embossed Method logo.

• Patented Bead Grip® technology engages tire bead for increased grip at low pressures
• Heavy Duty (HD) 4,500 lbs. load rating for maximum payload and towing capacity
• Solid A356 aluminum construction with T6 heat treatment for superior strength
• Reinforced inner lip design inspired by MRW desert race wheels
• Timeless 12-spoke design with debossed Method logo
• Specs: 17x9, 8x170 bolt pattern, +18mm offset, 130.81mm center bore
• Includes push-through center cap with embossed logo

The Method MR704 HD combines a timeless 12-spoke aesthetic with heavy-duty engineering for off-road and overland applications. Constructed from solid A356 aluminum with T6 heat treatment, this wheel utilizes a reinforced inner lip profile derived from Method Race Wheels' competition series to withstand the rigors of desert racing and technical trails.

Equipped with patented Bead Grip® technology, the MR704 HD features integrated grooves on the bead seat that engage the tire bead for increased security during low-pressure operation. This design, paired with an aggressive safety hump, allows for significantly lower tire deflation without the weight or maintenance of a traditional beadlock. Part number MR70479080518H includes either a push-through or snap-in center cap depending on the specific 8-lug application.

• Solid A356 aluminum construction with high-strength T6 heat treatment
• Patented Bead Grip® technology for tire security at low pressures
• Reinforced inner lip designed for increased structural integrity
• Classic 12-spoke design with debossed Method logo
• Size: 17x9 | Bolt Pattern: 8x6.5 | Offset: 18mm | Bore: 130.81mm
• Finish: Matte Black
• Manufacturer Part Number: MR70479080518H
• Lifetime manufacturer structural warranty

The Method Race Wheels MR704 704 Bead Grip wheel combines a timeless 12-spoke design with patented tire-retention technology engineered for off-road performance. Developed for overland adventures and desert racing, the Bead Grip technology allows for tire deflation to pressures that typically require mechanical beadlocks, ensuring the tire remains seated during high-load cornering and technical crawling.

• Patented Bead Grip technology engages tire bead for increased grip at low pressures
• Solid A356 aluminum construction with T6 heat treatment for maximum durability
• Reinforced inner lip design derived from Method Race Wheels (MRW) race wheels
• Aggressive safety humps on bead seats further prevent debeading
• Classic 12-spoke design with a debossed Method logo
• Push-through center cap included for 8-lug applications
• Load Rating: Optimized for heavy-duty 8-lug trucks
• Manufacturer Part Number: MR70478587500

The Method Race Wheels MR704 Bead Grip® wheel combines a timeless 12-spoke aesthetic with functional off-road engineering. Engineered for overland and desert applications, this wheel features patented Bead Grip® technology, which utilizes integrated grooves to engage the tire bead for increased traction at low pressures. This design allows for deflation levels previously reserved for traditional beadlock wheels without the maintenance or weight penalties.

• Solid A356 aluminum construction with T6 heat treatment for maximum durability.
• Patented Bead Grip® technology engages tire bead for secure seating at low air pressure.
• Aggressive safety humps on bead seats further prevent de-beading during high-load cornering.
• Reinforced inner lip architecture derived from Method’s MRW race wheels increases structural rigidity.
• Classic 12-spoke design with a debossed Method logo and a premium Matte Titanium finish.
• Includes a snap-in center cap with an embossed Method logo.
• Manufacturer Part Number: MR70478560800

Specifications:

• Diameter: 17in
• Width: 8.5in
• Bolt Pattern: 6x5.5 (6x139.7mm)
• Offset: 0mm
• Hub Bore: 106.25mm
• Backspacing: 4.75in

The Method MR704 Bead Grip® wheel combines a timeless 12-spoke aesthetic with advanced off-road engineering. Designed for overland enthusiasts and desert racers, this wheel features patented Bead Grip® technology. This system utilizes integrated grooves in the bead seat to engage the tire bead, allowing for lower tire pressures during off-road use that would typically require a mechanical beadlock.

Constructed from solid A356 aluminum with T6 heat treatment, the MR704 is built for durability on the toughest trails. It features a reinforced inner lip—a design element taken directly from Method Race Wheels' competition lineup—to increase structural strength. An aggressive safety hump on the bead seats provides additional security against debeading when aired down.

• Part Number: MR70478560500
• Size: 17x8.5
• Bolt Pattern: 6x5.5 (6x139.7)
• Offset: 0mm
• Hub Bore: 106.25mm
• Load Rating: 2650 lbs
• Solid A356 aluminum construction with T6 heat treatment
• Patented Bead Grip® technology for low-pressure tire security
• Reinforced inner lip for increased structural rigidity
• Snap-in center cap with embossed Method logo
• Manufacturer lifetime structural warranty

The Method Race Wheels MR704 Bead Grip® wheel combines a timeless 12-spoke aesthetic with advanced off-road performance technology. Engineered for desert racing, overland expeditions, and technical trails, the MR704 features patented Bead Grip® technology. This design utilizes integrated grooves on the bead seat to engage the tire bead, allowing for significantly lower tire pressures during off-road use without the weight or maintenance of a traditional beadlock wheel.

• Patented Bead Grip® technology engages tire bead for increased grip at low air pressures
• Aggressive safety hump on bead seats helps prevent tire debeading during lateral loads
• Reinforced inner lip derived from Method’s race wheels for increased structural strength
• Solid A356 aluminum construction with T6 heat treatment for maximum durability
• Timeless 12-spoke design with a debossed Method logo and matte black finish
• Snap-in center cap with embossed Method logo included
• Lifetime manufacturer's structural warranty
• Manufacturer Part Number: MR70478550500

Specifications: 17x8.5 wheel size, 5x5 (5x127mm) bolt pattern, 0mm offset, and 71.5mm center bore.

The Method Race Wheels MR703 Bead Grip series is engineered specifically for off-road enthusiasts and overlanders who demand performance on technical trails. Featuring an iconic 12-window design with dual debossed logos, this wheel utilizes patented Bead Grip technology to secure the tire bead at significantly lower pressures—bridging the gap between a standard wheel and a full beadlock. This system uses integrated grooves on the bead seat and an aggressive safety hump to prevent de-beading during aired-down maneuvers.

Constructed from high-strength solid A356 aluminum with a T6 heat treatment, the MR703 is built for durability. It features a reinforced inner lip derived from Method's race wheels to increase structural rigidity against impacts. This model includes a snap-in center cap with the embossed Method logo, suitable for 6-lug applications.

• Part Number: MR70379060912N
• Wheel Size: 17x9
• Bolt Pattern: 6x5.5
• Offset: -12mm
• Backspacing: 4.8in
• Hub Bore: 106.25mm
• Material: Solid A356 aluminum with T6 heat treatment
• Patented Bead Grip technology for low-pressure performance
• Reinforced inner lip for increased strength
• Manufacturer's lifetime structural warranty

The Method Race Wheels MR703 series is engineered for off-road enthusiasts and overland travelers who require peak performance on technical terrain. Featuring a classic 12-window design finished in Gloss Titanium, this 17x9 wheel combines iconic styling with the structural integrity needed for aggressive trail use.

Equipped with patented Bead Grip technology, the MR703 allows you to deflate your tires to pressures that would typically require mechanical beadlocks. The specialized bead seat and aggressive safety humps engage the tire bead more securely, preventing de-beading during low-PSI maneuvers. For added durability, the inner lip is reinforced with geometry derived from Method's desert race wheels to resist impacts and deformation.

• Solid A356 aluminum construction with T6 heat treatment
• Patented Bead Grip technology for superior tire security at low pressures
• Reinforced inner lip increases overall wheel strength
• Aggressive safety humps on bead seats to prevent de-beading
• Snap-in center cap with embossed Method logo
• Size: 17x9 | Offset: -12mm | Bore: 106.25mm | Bolt Pattern: 6x5.5 | Backspacing: 4.8in
• Manufacturer Part Number: MR70379060812N
• Industry-leading lifetime manufacturer structural warranty

The Method Race Wheels MR703 Bead Grip® is engineered for off-road enthusiasts who demand high-performance security on technical trails and overland expeditions. This wheel features patented Bead Grip® technology, which utilizes integrated grooves in the bead seat to engage the tire bead more effectively. This allows for safe tire deflation to pressures that typically require a beadlock wheel, without the maintenance or weight of a traditional beadlock system.

Constructed from solid A356 aluminum with a T6 heat treatment, the MR703 is built for durability. The reinforced inner lip is derived from Method’s desert racing wheels to increase structural integrity, while an aggressive safety hump on the bead seats provides additional protection against debeading. The iconic 12-window design is finished in a durable matte black and includes a snap-in center cap with the embossed Method logo.

• Patented Bead Grip® technology allows for lower tire pressures
• Solid A356 aluminum with T6 heat treatment construction
• Reinforced inner lip increases strength for rugged terrain
• Aggressive safety hump on bead seats prevents debeading
• Iconic 12-window design with dual debossed Method logos
• Snap-in center cap with embossed Method logo
• Size: 17x9 | Offset: -12mm | Bore: 106.25mm | Bolt Pattern: 6x5.5
• Manufacturer Part Number: MR70379060512N

Engineered for technical off-road performance, the Method MR703 Bead Grip wheel combines iconic styling with patented technology designed for the toughest trails. This 17x9 wheel features a classic 12-window design and is constructed to withstand the rigors of overland adventure.

The patented Bead Grip technology utilizes integrated grooves to secure the tire bead, allowing for significantly lower tire pressures than traditional wheels without the risk of debeading. This provides the traction benefits of a beadlock in a street-legal, solid A356 aluminum package with T6 heat treatment for maximum strength.

• Size: 17x9
• Bolt Pattern: 5x5.5 (5x139.7)
• Offset: -12mm
• Backspacing: 4.8in
• Hub Bore: 108mm
• Material: Solid A356 aluminum with T6 heat treatment
• Patented Bead Grip technology engages tire bead for low-pressure security
• Reinforced inner lip design derived from MRW race wheels for increased durability
• Aggressive safety hump on bead seats further prevents tire debeading
• Snap-in center cap with embossed Method logo
• Manufacturer Part Number: MR70379055512N
• Industry-best lifetime manufacturer's structural warranty