Give the 3.0T TFSI powering your 2018+ Audi S4 or S5 the extra layer of defense that it needs with the Mishimoto Direct Fit Baffled Oil Catch Can. Volkswagen and Audi were on the front lines of the direct injection revolution, which means they were also one of the first to implement a means to protect against blow-by gasses. While the factory AOS system does filter out some oil and fuel vapors, the harmful contaminants still make their way to the intake valves. The Mishimoto Direct-Fit Baffled Oil Catch Can Kit for your 2018+ Audi S4/S5 installs in line with the PCV system right after the factory separator for immediate protection of the intake components. Our catch can features a patent pending 2-port Compact Baffled Oil Catch Can with a 50-micron bronze filter and an internal baffle to better separate oil from the crankcase vapors. Our kit also includes a set of direct fit hoses for a simple installation, including two Mishimoto One-Way Performance Check Valves to prevent your catch can from becoming pressurized. In order to simplify servicing, our kit includes a petcock drain kit, so draining captured blow-by is a cinch. The Mishimoto 2018+ Audi B9 S4/S5 Direct Fit Catch Can Kit also includes the Mishimoto Lifetime Warranty for a worry-free installation. Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter
• Patent pending billet 6061 aluminum can sealed with Viton(TM) O-rings
• Installs in under 30 minutes

This Part Fits:

The Mishimoto Focus RS Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield very little accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Ford Focus RSs on the road. The Mishimoto Focus RS catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit hoses that connect the catch can with the crankcase and intake manifold. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location, right next to the engine's oil drain plug! Two CNC-machined aluminum, 3/8in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single can mounting inline with the PCV system separates oil particles using 50 micron bronze filter
• Black hoses come pre-molded for reliable install
• Application specific bracket mounts

This Part Fits:

Infiniti is no stranger to the luxury sedan segment, taking on the likes of BMW, Mercedes, and Audi. The introduction of their VR30DDTT made the 2016-2024 Q50 and Q60 into a rocket ship and blasted the manufacturer into the stratosphere alongside the typical posh sedans. Luxury is all about the ability to perform, which is where even the most advanced internal combustion engines still suffer. Luckily, we're here to keep the blow-by off those intake valves with the 2016-2024 Infiniti Q50/Q60 3.0T Direct-Fit Catch Can Kit. The powerhouse 3.0T equipped in these Infinitis is the prime breeding ground for blow-by and carbon buildup. With the already high compression ratio, combined with a turbo for each bank and a direct injection fueling system, oil and fuel particles have free range to gum up the intake manifold and valves, ultimately diminishing the performance and luxury of your Q50 or Q60. Nestled in the tight engine bay, our 2-port compact catch can design is installed in line with the VR30DDTT's PCV system to intercept and trap oil and fuel particles from the crankcase before they have a chance to take up residence on the top end components. Our robust mounting bracket places the catch can in an easily accessible location and includes a slotted mounting screw design to take the hassle out of servicing the can. To back up Mishimoto's superior craftsmanship, each 2016-2024 Q50/Q60 catch can kit comes with the renowned Mishimoto Lifetime Warranty!

• Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter
• Patented (US D884,760 S) billet 6061 aluminum can sealed with Viton O-rings
• Helps reduce carbon buildup on intake valves

This Part Fits:

Keep your crankcase free of harmful oil, fuel, and water vapors with the Mishimoto Universal High-Flow Baffled Catch Can Kit. Compatible with a wide range of makes and models, this kit includes a powder coated universal bracket that lets you mount it in the most convenient and secure location. The fully-serviceable design features a detachable bottom for quick and easy maintenance, while the removable 50-micron bronze filter improves oil separation to keep your engine breathing right. The inlet and outlet ports accept multiple fitting sizes to accommodate a variety of hose sizing, and the all-aluminum billet barbed fittings ensure easy, secure hose installation. M20 ORB threading provides a tight, pressure-resistant seal to prevent leakage—even in demanding conditions. ---- Backed by the Mishimoto Lifetime Warranty, this catch can kit offers long-lasting protection and reliability to keep your engine running better and longer.

• Universal design works with various makes and models
• 50-micron bronze filter for improved oil separation
• Fully serviceable can with detachable bottom

The Mishimoto BMW N55 Baffled Oil Catch Can is designed and engineered to reduce carbon build-up, a common issue with the direct fuel injection N55 engines. The Mishimoto BMW N55 catch can kit uses proven engineering from the Mishimoto 2-Port Compact Baffled Oil Catch Can, with its bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports in order to match the inner dimension of the CCV hose. This baffled oil catch can will defend your intercooler, intake system, and VANOS system from oil blow-by and help maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit mounting bracket that not only is extremely easy to install, but also mounts the can in a serviceable location! Two CNC-machined aluminum, 3/4in barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single 2-Port Compact Baffled Oil Catch Can separates oil particles using 50-micron bronze filter
• Direct-fit hoses allow for installation with no modification to engine cover
• Application-specific bracket mounts the can in a serviceable location

This Part Fits:

The Mishimoto BMW N54 Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with the direct fuel injection N54 engines. The Mishimoto BMW N54 catch can kit uses the proven engineering from the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid which features large inlet/outlets in order to match the inner dimension of the CCV hose. This baffled oil catch can will defend your intercooler, intake system, and VANOS system from oil-blowby and help maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two CNC-machined aluminum, in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single 2-Port Compact Baffled Oil Catch Can with application-specific lid mounts in line with the CCV system to separate oil particles using 50 micron bronze filter
• Direct fit hoses allow for installation with no modification to engine cover
• Application-specific bracket mounts the can in a serviceable location

This Part Fits:

The Mishimoto BMW N20/N26 Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with the direct fuel injection N20 and N26 engines. The Mishimoto BMW N20/N26 catch can kit uses the proven engineering from the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid which features large inlet/outlets in order to match the inner dimension of the CCV hose. This baffled oil catch can will defend your intercooler, intake system, and VANOS system from oil-blowby and help maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two CNC-machined aluminum, 3/4in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single 2-Port Compact Baffled Oil Catch Can with application-specific lid mounts in line with the CCV system to separate oil particles using 50 micron bronze filter
• Application-specific bracket mounts the can in a serviceable location
• Direct fit hoses allow for installation with no modification

This Part Fits:

As powerful as the Ford Coyote engine is, It'still needs some protection, and the Mishimoto engineers created a baffled catch can kit to do just that. Engine blow-by can cause an oily mess inside intake manifolds and decrease octane levels, potentially increasing chances of detonation. Mishimoto's 2015 Mustang catch can kit features Mishimoto's 2-port Compact Baffled Oil Catch Can with a bronze filter and internal baffle to better separate the oil from the crankcase vapors. Two direct-fit hoses and an application-specific bracket make for a quick and simple installation. Reducing blow-by becomes even more important with the addition of forced induction, so this 2015 Mustang catch can kit mounts away from most intake and supercharger kits to make room for some more horses. When you?re winding out that 5.0L Coyote, you'll have the peace of mind knowing that blow-by isn't stripping any of your treasured HP away. This Mishimoto 2015 Mustang catch can kit increases the aesthetics of your engine bay with direct-fit hoses available in black, blue, or red. To back up Mishimoto's superior craftsmanship each 2015 Mustang catch can kit comes with the renowned Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Robust, application-specific bracket mounts the can in a serviceable location away from most intake and supercharger kits
• Single can mounts in line with the PCV system to separate oil from air using a 50 micron bronze filter
• Installs in under 30 minutes

This Part Fits:

This Mishimoto baffled oil catch can kit is engineered to reduce carbon buildup in your 2015-2023 Ford Mustang EcoBoost, a common issue with direct-injected engines. Our direct-fit catch can kit taps into the PCV system of the vehicle to capture maximum blow-by during normal and aggressive driving. It utilizes our patented 2-Port compact baffled oil catch can, complete with a bronze filter and internal baffles to better separate the oil, fuel, and water from the crankcase gasses, ensuring only clean air returns to your intake system. Our catch can is fully serviceable, meaning you don't have to worry about replacing filter media, ever. Just disassemble the catch can, clean it with soapy water, and reassemble.----The kit comes with two direct-fit hoses and preassembled quick-disconnect fittings for easy installation. It also includes a direct-fit mounting bracket that not only is extremely easy to install, but also mounts the can in a serviceable location in your EcoBoost Mustang's engine bay for easy draining. Two CNC-machined aluminum fittings connect the hoses to the can for reliable, leak-free performance. Like all Mishimoto EcoBoost Mustang parts, this 2015-2023 Ford Mustang EcoBoost baffled oil catch can kit is backed by our Mishimoto Lifetime Warranty.---- Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all the blow-by condenses in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what we've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single 2-Port Compact Baffled Oil Catch Can mounts in line with the PCV system to separate oil particles using 50 micron bronze filter
• Silicone hoses include preattached stock-style connections for plug-and-play install
• Application-specific bracket mounts the can in a serviceable location

This Part Fits:

Add a layer of protection to your 2007-2013 Mazdaspeed 3 with the Mishimoto Baffled Oil Catch Can Kit. While the MS3 might have been one of the pioneers in the North American hot-hatch renaissance in the mid-2000s, but like the rest of the direct injected turbo charged engines of that era, It'suffered from copious carbon build up due to engine blow-by. The 2.3L MZR turbo also has a unique issue with blow-by as It's equipped with a top-mounted intercooler which is prone to heat soak effectively baking in all of the oil and fuel droplets into the heat exchanger. With the Mishimoto Baffled Oil Catch Can Kit, those crank-case gases are intercepted before even reaching the intercooler in the 6061-billet aluminum can. We also included our taller 7.5 oz. catch can to compensate for the increased levels of blow-by that the Mazdaspeed 3 experiences in colder weather. Also included in the kit are pre-formed hoses along with all of the necessary mounting hardware to ensure a simple, and direct fit to your MS3. As with all of our products, the Mazdaspeed 3 Baffled Oil Catch Can Kit is covered under the Mishimoto Lifetime Warranty, keeping your 2.3L MZR Turbo blow-by free over the lifetime of the car.

• Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter
• Robust, application-specific bracket mounts the can in a serviceable location
• Installs in under 30 minutes

This Part Fits:

With the release of the new 2016 Mazda Miata, the Mishimoto engineers are hard at work looking for ways to improve engine efficiency. They created this new direct-fit Miata oil catch can system to help protect the heart of your Miata from harmful blow-by. Direct injection engines, like the one in the 2016 Miata, suffer from accelerated carbon build up due to the lack of port injection, which washes the valves with fuel during engine operation. The engineers saw a significant coating of oil build up while examining the intake manifold. The oil was coming from the PCV system, which contributed to carbon accumulation and a decrease in octane levels. Mishimoto's new Miata catch can system helps to prevent this blow-by from reaching the intake, resulting in a cleaner running engine. Mishimoto's Mazda Miata oil catch can kit features Mishimoto's 2-port Compact Baffled Oil Catch Can with a bronze filter and internal baffle to better separate the oil from the crankcase vapors. Two direct-fit hoses and an application-specific bracket make for a quick and simple installation. Like all Mishimoto ND Miata parts, this catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single can mounts in-line with the PCV system to separate oil particles using 50 micron bronze filter
• Application-specific bracket mounts the can in a serviceable location inside the engine bay
• Features integrated drain valve and hose for easy service

This Part Fits:

The third-generation Chevrolet Silverado was offered with both 5.3L and 6.2L LS engines. These engines feature direct injection, which is great for creating an efficient burn and saving fuel but allows for carbon buildup on the intake valves. As blow-by flows over the intake valves, oil and carbon deposits can build up, impeding airflow and eventually preventing the valves from closing. The best way to treat carbon buildup is to prevent it, and that's where this Mishimoto Chevrolet/GMC 1500 direct-fit catch can kit comes in. This Mishimoto catch can kit diverts blow-by away from the intake and traps it in our catch can. Inside the can, a set of air turbulators and baffles separate fuel, oil, and water vapors from the crankcase gasses and collects them to be drained next time you change your oil. By not returning the blow-by to your oil pan, our kit prevents fouling of the oil that could reduce its effectiveness, leading to accelerated engine wear. Finally, a sintered bronze filter removes any remaining carbon from the crankcase gases so that only clean air returns to your intake. The Mishimoto Chevrolet/GMC 1500 catch can kit is a complete bolt-on blow-by solution and includes all necessary components for a hassle-free installation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.

• Catch can captures blow-by, preventing it from fouling the engine oil
• Protects intake valves from power-robbing carbon buildup
• Installs in under an hour

This Part Fits:

The direct-injected and turbocharged 2.0L Hurricane engine found in the 2018-2023 Jeep Wrangler JL is the most advanced engine ever fitted to a Wrangler. But, despite all the high-tech features that make the Hurricane great, It's still vulnerable to a very low-tech problem: blow-by. The fuel efficiency and increased power of direct injection comes with the threat of carbon buildup. As fuel and air get squeezed in the cylinder, some of the mixture leaks past the piston rings and carries oil from the cylinder walls with it. This mixture is known as blow-by. To prevent crankcase pressure from building up, the blow-by is then vented into the intake to be reburned. Blow-by becomes an issue with direct-injected engines when it passes the intake valves. Without fuel spraying over the valve, There's nothing to wash off the blow-by and heat from combustion eventually causes it to build up as carbon on the back of the intake valves. That carbon buildup prevents valves from closing fully and disrupts airflow. The result is poor running, misfires and, if left long enough, engine damage. The best solution to the problem of blow-by buildup is prevention. Instead of letting blow-by enter the intake, the Mishimoto 2018-2023 Jeep Wrangler JL 2.0L direct-fit baffled oil catch can kit diverts it away from the intake valves and into a 7.5 oz catch can. You can then recycle the contents of the catch can with your next oil change. The internal air diverters and baffle of our catch can thoroughly condense oil, fuel, and water vapor so that the only air flowing through your intake is fresh air. In addition, our direct-fit lines and high-flow filter ensure CEL-free running. Like all Mishimoto products, this 2018-2023 Jeep Wrangler JL 2.0L catch can kit is protected by our Mishimoto Lifetime Warranty, so your JL can also be protected from blow-by for a lifetime.

• Durable 3mm thick steel bracket mounts the catch can securely while maintaining short hose runs
• Accommodates factory pressure sensor for CEL-free running
• Installs in under 1 hour

This Part Fits:

High-output engines require high-flow crankcase ventilation. More air and fuel going into the cylinder means more blow-by working its way past the piston rings and traveling around your intake system. All that volume needs room to flow, and if you're using a catch can, it better flow well too. Luckily, Mishimoto has created a catch can that meets those needs. Our high-flow catch can utilizes a high-capacity bottom with a 5.3 fl. oz. capacity. The CNC-machined lid includes large, M27 x 2.0 inlets and outlets to let your crankcase breathe. Inside the can is a newly engineered, CNC-machined baffle with integrated filter that lets crankcase gases flow through while filtering out potentially harmful fuel, oil, and water vapors. Like our compact baffled oil catch can, our high-flow catch can and filter are fully serviceable for easy draining and cleaning. The included 3/8ft NPT plug in the bottom of the can allows you to drain the can without removing the bottom or attach our available drain kit for even easier servicing. Also included with this kit is a universal bracket and mounting hardware to locate the catch can in the most convenient and secure location. Of course, all our catch can kits come with Mishimoto's Lifetime Warranty with Accident Protection, and this kit is no exception.

• High-flow catch can allows your crankcase to breathe while filtering out harmful oil, fuel, and water vapors
• Universal bracket lets you mount the catch can in the most convenient and secure location
• Universal fit to suit any high-output engine

Give your VQ37 powered Infiniti the protection it deserves with the Mishimoto 2007-2013 Infiniti G37 Baffled Oil Catch Can kit. Our complete, dual-can setup combats the one issue that effects every modern day engine ? blow-by. As a side effect of how your engine operates, and to keep the environmentalists satisfied, engine oil droplets make their way back through the intake tract and can build carbon on the valves ultimately robbing your high-output V6 of its performance. With our G37 Baffled oil Catch Can Kit installed, you will have an unbeatable setup that will effectively intercept the contaminated crankcase gasses and prevent them from entering the intake.Our complete kit utilizes a pair of our tried and true 6061 aluminum compact catch cans that mount in line with the VQ37VHR?s dual PCV system using an application specific mounting bracket. It's more of what?s on the inside that counts for these catch cans, however. Our compact oil catch cans come equipped with a highly engineered baffle designed to condense oil droplets and fuel vapors to be collected in the bottom of the can. We've also incorporated internal air diverters to ensure a smooth, and consistent flow of your PCV pressure. As an added line of defense, each one of our catch cans has a 50-micron bronze filter installed to trap any potential rogue oil droplets from escaping into the return line. Finally, every kit comes with a full set of pre-molded flat-black hoses that look right at home under the hood of your G37 and also ships with the Mishimoto Lifetime Warranty.Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you?ve seen what We've

• Application specific bracket mounts the cans in an easily maintained location inside the engine bay
• Mounts in line with the PCV system to separate oil from air using a 50 micron bronze filter
• Installs in under 1 hour

This Part Fits:

Carbon buildup is an enemy of any motor, and the Mishimoto Direct-Fit Oil Catch Can system for your 2011+ Ford F-150 is the defense. Modern vehicles use a PCV, or Positive Crankcase Ventilation", system to capture the vapors that escape past the piston rings into the crankcase of your engine and recirculate them back into the intake system to be burned again. While this is much better for the environment, it's not as great for your engine. In doing so, these vapors carry remnants of oil and unburned fuel, which make their way into your intake system, causing multiple problems. The first and largest problem is that the oil particles being carried in these vapors coat your intake system, including the intake manifold and intake valves. Over time, this will gum up and turn into carbon buildup. Direct-injection engines, like the EcoBoost, are especially prone to severe carbon buildup on the intake valves. The second issue is that those oily vapors being introduced back into the cylinder during combustion can reduce the overall octane rating of the fresh fuel being provided, causing pre-detonation and knocking. This is where the Mishimoto Direct-Fit Oil Catch Can system comes into play. By installing our catch can in line with your PCV system, the 50-micron bronze filter captures those oily particles and allows them to condense until they become heavy enough to drip into the canister to be collected instead of flowing back into your engine. This leaves the air flowing back into your intake system clean and ready to be burned again. The catch can mounts with a sturdy 3-mm thick steel bracket in a convenient and serviceable location, allowing you to easily empty the waste oil. The pre-molded hoses with factory style quick-disconnects make installation a breeze, and even fit with the factory engine cover. As with all our products, this catch can is backed by our signature Mishimoto Lifetime Warranty.

• Robust 3mm-thick steel bracket ensures a sturdy mounting point in a serviceable location
• Helps reduce carbon buildup on intake valves
• Anodized billet 6061 aluminum construction

This Part Fits:

The Mishimoto Focus ST Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield very little accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Ford Focus STs on the road. The Mishimoto Focus ST catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit hoses that connect the catch can with the crankcase and intake manifold. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location, right next to the engine's oil drain plug! Two CNC-machined aluminum, 3/8in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining

• Single can mounting inline with the PCV system separates oil particles using 50 micron bronze filter
• Black hoses come pre-molded for reliable install
• Application specific bracket mounts

This Part Fits:

The Mishimoto Ford Fiesta ST Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Thousands of test miles were logged on our Fiesta ST to determine what can setup would work the best. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield nearly no accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Fiesta ST's on the road. The Mishimoto Ford Fiesta ST catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit hoses with pre-assembled quick-disconnect fittings for a simple installation. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two CNC-machined aluminum, in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single can mounts in-line with the PCV system to separate oil particles using 50 micron bronze filter
• Silicone hoses include pre-attached stock-style quick-disconnect fittings for plug and play install
• Offered with black, blue, or red silicone hoses that come pre-molded for a reliable install

This Part Fits:

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M's saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what we've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single 2-Port Compact Baffled Oil Catch Can separates oil particles using 50-micron bronze filter
• Direct-fit hoses allow for installation with no modification to engine cover
• Application-specific bracket mounts the can in a serviceable location

This Part Fits:

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M's saw turbos from the factory, but these engines brought along another long-standing tradition-blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Available with a color-matched bracket. Choose from 12 BMW specific color-matched options or classic black. Two aluminum, 3/4" barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what we've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single 2-Port Compact Baffled Oil Catch Can separates oil particles using 50-micron bronze filter
• Direct-fit hoses allow for installation with no modification to engine cover
• Application-specific bracket mounts the can in a serviceable location

This Part Fits:

Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Direct Fit Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first that the compact M's saw turbos from the factory, but these engines brought along another long-standing tradition - Blow-by.The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports in order to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation.The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Two aluminum, 3/4in barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty!Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

• Single 2-Port Compact Baffled Oil Catch Can separates oil particles using 50-micron bronze filter
• Direct-fit hoses allow for installation with no modification to engine cover
• Application-specific bracket mounts the can in a serviceable location

This Part Fits:

Turbocharging and direct-injection are quickly becoming the go-to method for building powerful and efficient trucks. However, if not carefully maintained, they can become a problem for your 2021.5+ Ford F-150 3.5L EcoBoost.----Direct injection makes the 3.5L EcoBoost one of the most efficient engines ever fitted to the F-150 but, without the benefit of fuel washing over the back of the intake valves, blow-by is free to accumulate in the form of carbon deposits. Eventually, those carbon deposits can choke your engine and reduce its performance. Thankfully, Mishimoto has a solution.----Mishimoto's 2021.5+ Ford F-150 3.5L EcoBoost Catch Can Kit protects your intake tract and valves from the harmful effects of blow-by and carbon accumulation. The dual-can setup ensures that blow-by is routed away from your intake and valves in all driving conditions. Our road-proven 12 fl. oz. baffled catch can holds more blow-by for extended service intervals. Whether you're hard on the throttle or cruising around town, these cans have your engine's back.----The powder coated, 3mm-thick steel bracket is strong enough to handle any terrain a work truck, off-roader, or daily driver will see, and the pre-installed quick-disconnect fittings make installation a breeze. Of course, this catch can kit is backed by our Mishimoto Lifetime Warranty so you can rest easy knowing your 2021.5+ F-150 3.5L EcoBoost is protected from blow-by for as long as you own it.

• Dual-can setup captures blow-by from both the PCV and CCV systems
• Patent #US D884,760 S
• N/A

This Part Fits:

Turbocharging and direct-injection are quickly becoming the go-to method for building powerful and efficient trucks. However, if not carefully maintained, they can also mean the end for your 2017-2020 Ford F-150 3.5L EcoBoost. Direct injection makes the 3.5L EcoBoost one of the most efficient engines ever fitted to the F-150. But, without the benefit of fuel washing over the back of the intake valves, blow-by is free to accumulate in the form of carbon deposits. Eventually, those carbon deposits can choke your engine and reduce its performance. Thankfully, Mishimoto has a solution. Mishimoto's 2017-2020 Ford F-150 3.5L EcoBoost Catch Can Kit protects your intake tract and valves from the harmful effects of blow-by and carbon accumulation. The dual-can setup ensures that blow-by is routed away from your intake and valves in all driving conditions. Our road-proven 12 fl. oz. baffled catch can holds more blow-by for extended service intervals. Whether you're hard on the throttle or cruising around town, these cans have your engine's back. The powder coated, 3mm-thick steel bracket is strong enough to handle any terrain a work truck or daily driver will see, and the pre-installed quick-disconnect fittings make installation a breeze. Of course, this catch can kit is backed by our Mishimoto Lifetime Warranty so you can rest easy knowing your 2017-2020 F-150 3.5L EcoBoost is protected from blow-by for as long as you own it.

• Dual-can setup captures blow-by from both the PCV and CCV systems
• CCV side accommodates stock pressure sensor for CEL-free running
• Includes oversized 12 fl. oz. can for longer service intervals

This Part Fits:

Turbocharging and direct-injection are quickly becoming the go-to method for building powerful and efficient trucks. However, if not carefully maintained, they can also mean the end for your 2011?2014 Ford F-150 3.5L EcoBoost. Direct injection makes the 3.5L EcoBoost one of the most efficient engines ever fitted to the F-150. But, without the benefit of fuel washing over the back of the intake valves, blow-by is free to accumulate in the form of carbon deposits. Eventually, those carbon deposits can choke your engine and reduce its performance. Thankfully, Mishimoto has a solution. Mishimoto's 2011?2014 Ford F-150 3.5L EcoBoost Catch Can Kit protects your intake tract and valves from the harmful effects of blow-by and carbon accumulation. The dual-can setup ensures that blow-by is routed away from your intake and valves in all driving conditions. Our road-proven 7.5 fl. oz. and 12 fl. oz. baffled catch cans hold more blow-by for extended service intervals. An in-line check valve ensures boost stays where it belongs, not in your catch can. Whether you're hard on the throttle or cruising around town, these cans have your engine's back. The powder coated steel bracket is strong enough to handle any terrain a work truck or daily driver will see, and the included quick-disconnect fittings make installation a breeze. Of course, this catch can kit is backed by our Mishimoto Lifetime Warranty so you can rest easy knowing your 2011?2014 F-150 3.5L EcoBoost is protected from blow-by for as long as you own it.

• Dual-can setup captures blow-by from both the PCV and CCV systems
• Large 7.5 oz and 12 oz cans for longer service intervals
• Application-specific lines fit with stock engine cover

This Part Fits:

High-output engines require high-flow crankcase ventilation. Our high-flow catch can utilizes a high-capacity bottom with a 5.3 fl. oz. capacity. The CNC-machined lid includes large, M27 x 2.0 inlets and outlets to let your crankcase breathe. Inside the can is a CNC-machined baffle with integrated filter that lets crankcase gases flow through while filtering out potentially harmful fuel, oil, and water vapors. Like our compact baffled oil catch can, our high-flow catch can and filter are fully serviceable for easy draining and cleaning. To make this kit a direct fit for your 2017-2022 Ford 6.7L Powerstroke, Mishimoto includes a custom-engineered, 3mm-thick steel bracket. This bracket mounts the can in an easy to access location for quick servicing. To withstand the rigors of life under the hood of your 6.7L, our bracket is gusseted and powder-coated black for the highest strength and resistance to the elements. Also included with this kit is a set of direct-fit hoses and adapters that allow the catch can to tap into the stock CCV breather box and carry blow-by away from your engine. For even more protection, this 2017-2022 Ford 6.7L Powerstroke Baffled Oil Catch Can is backed by our Mishimoto Lifetime Warranty.

• High-flow catch can allows your crankcase to breathe while filtering out harmful oil, fuel, and water vapors
• Sturdy, 3mm thick steel bracket mounts the catch can in an easily accessible location for easy servicing
• Direct-fit for 2017-2022 Ford 6.7L Powerstroke

This Part Fits:

High-output engines require high-flow crankcase ventilation. Our high-flow catch can utilizes a high-capacity bottom with a 5.3 fl. oz. capacity. The CNC-machined lid includes large, M27 x 2.0 inlets and outlets to let your crankcase breathe. Inside the can is a CNC-machined baffle with integrated filter that lets crankcase gases flow through while filtering out potentially harmful fuel, oil, and water vapors. Like our compact baffled oil catch can, our high-flow catch can and filter are fully serviceable for easy draining and cleaning. To make this kit a direct fit for your 2011-2016 Ford 6.7L Powerstroke, Mishimoto includes a custom-engineered, 3mm-thick steel bracket. This bracket mounts the can in an easy to access location for quick servicing. To wIt'stand the rigors of life under the hood of your 6.7L, our bracket is gusseted and powder-coated black for the highest strength and resistance to the elements. Also included with this kit is a set of direct-fit hoses and adapters that allow the catch can to tap into the stock CCV breather box and carry blow-by away from your engine. For even more protection, this 2011-2016 Ford 6.7L Powerstroke Baffled Oil Catch Can is backed by our Mishimoto Lifetime Warranty.

• Sturdy, 3mm thick steel bracket with quick-release design allows for easy servicing of catch can and other under-hood components
• High-flow catch can allows your crankcase to breathe while filtering out harmful oil, fuel, and water vapors
• Direct-fit for 2011-2016 Ford 6.7L Powerstroke

This Part Fits:

High-output engines require high-flow crankcase ventilation. Our high-flow catch can utilizes a high-capacity bottom with a 5.3 fl. oz. capacity. The CNC-machined lid includes large, M27 x 2.0 inlets and outlets to let your crankcase breathe. Inside the can is a CNC-machined baffle with integrated filter that lets crankcase gases flow through while filtering out potentially harmful fuel, oil, and water vapors. Like our compact baffled oil catch can, our high-flow catch can and filter are fully serviceable for easy draining and cleaning.To make this kit a direct fit for your 2008-2010 Ford 6.4L Powerstroke, Mishimoto includes a custom-engineered, 3mm-thick steel bracket. This bracket mounts the can in an easy-to-access location under the truck using existing mounting holes. This mounting location allows for quick and easy servicing, without even opening the hood. The catch can bracket is powder-coated black to protect it from the elements and includes stainless steel hardware to withstand the test of time.Our kit also includes a CNC-machined, black anodized, aluminum oil fill neck and machined aluminum cap. This fill neck doesn't just improve your truck's under-hood aesthetics, it also eliminates the stock air-oil-separator that drains blow-by vapors back into the engine, keeping your engine running cleaner. The durable Mishimoto aluminum oil cap replaces the failure-prone ratcheting cap so you never have to worry about a stuck cap preventing you from adding oil.Also included with this kit is a set of direct-fit hoses to carry blow-by away from your engine and into the Mishimoto catch can. For even more protection, this 2008-2010 Ford 6.4L Powerstroke Baffled Oil Catch Can is backed by our Mishimoto Lifetime Warranty.

• High-flow catch can allows your crankcase to breathe while filtering out harmful oil, fuel, and water vapors
• Durable 3mm-thick steel bracket mounts catch can under truck for easy servicing in minutes
• Direct-fit for the 2008-2010 Ford 6.4L Powerstroke

This Part Fits:

High-output engines require high-flow crankcase ventilation. More air and fuel going into the cylinder means more blow-by working its way past the piston rings and traveling around your intake system. All that volume needs room to flow, and if you?re using a catch can, it better flow well too. Luckily, Mishimoto has created a catch can that meets those needs. Our high-flow catch can utilizes a high-capacity bottom with a 5.3 fl. oz. capacity. The CNC-machined lid includes large, M27 x 2.0 inlets and outlets to let your crankcase breathe. Inside the can is a newly engineered, CNC-machined baffle with integrated filter that lets crankcase gases flow through while filtering out potentially harmful fuel, oil, and water vapors. Like our compact baffled oil catch can, our high-flow catch can and filter are fully serviceable for easy draining and cleaning. The included 3/8? NPT plug in the bottom of the can allows you to drain the can without removing the bottom or attach our available drain kit for even easier servicing. To make this kit direct-fit for your 2003-2007 Ford 6.0L Powerstroke, Mishimoto includes a custom-engineered bracket that bolts to the driver?s side frame rail, just behind the wheel well. This mounts the can in an easy to access location that?s out of the way of engine components. The 3mm thick steel bracket is gusseted and powder-coated black for the highest strength and resistance to the elements. Also included with this kit is a set of direct-fit nitrile hoses to carry blow-by away from your engine and into the catch can. Of course, all our catch can kits come with Mishimoto's Lifetime Warranty with Accident Protection, and this kit is no exception.

• High-flow catch can allows your crankcase to breathe while filtering out harmful oil, fuel, and water vapors
• Sturdy, 3mm thick steel bracket mounts the catch can in an easily accessible location for easy servicing
• Direct-fit for 2003-2007 Ford 6.0L Powerstroke

This Part Fits:

Turbocharging and direct-injection are quickly becoming the go-to method for building powerful and efficient trucks. However, if not carefully maintained, they can also mean the end for your 2015-2017 Ford F-150 2.7L EcoBoost. Direct injection makes the 2.7L EcoBoost one of the most efficient engines ever fitted to the F-150. But, without the benefit of fuel washing over the back of the intake valves, blow-by is free to accumulate in the form of carbon deposits. Eventually, those carbon deposits can choke your engine and reduce its performance. Thankfully, Mishimoto has a solution. Mishimoto's 2015-2017 Ford F-150 2.7L EcoBoost Catch Can Kit protects your intake tract and valves from the harmful effects of blow-by and carbon accumulation. The dual-can setup ensures that blow-by is routed away from your intake and valves and is captured in our road-proven, baffled catch cans. Whether you're hard on the throttle or cruising around town, these cans have your engine's back. The 3mm thick steel bracket is strong enough to handle any terrain a work truck or daily driver will see and the included quick-disconnect fittings make installation a breeze. Of course, this catch can kit is backed by our Mishimoto Lifetime Warranty so you can rest easy knowing your 2015-2017 F-150 2.7L EcoBoost is protected from blow-by for as long as you own it.

• In-line check valve prevents can from being pressurized under boost.
• Dual-can setup captures blow-by from both the PCV and CCV systems
• CCV side accommodates stock pressure sensor for CEL-free running

This Part Fits:

The performance-oriented SUV has been an exciting segment of automotive history. From the turbocharged Typhoon of the 90s, and the LS2-powered Trailblazer SS, to the modern Jeep SRT-8 and Trackhawk with supercar-like acceleration. Ford has stayed out of this market until now, with their new Explorer ST. Utilizing the venerable 3.0L EcoBoost, this highly tunable rig puts out substantial power. Using our extensive experience with the EcoBoost lineup of engines, we knew a catch can would be the first project to tackle. The 3.0L EcoBoost's direct injection improves the combustion process and provides fantastic fuel mileage and power benefits. Unfortunately, this feature also means the intake valves are vulnerable to carbon. As blow-by flows over the intake valves, oil and carbon deposits can build up, impeding airflow and eventually preventing the valves from closing. The best way to treat carbon buildup is to prevent it, and that's where this Mishimoto Ford Explorer ST catch can kit comes in. This Mishimoto catch can kit diverts blow-by away from the intake and traps it in our catch can. Inside the can, a set of air turbulators and baffles separate fuel, oil, and water vapors from the crankcase gasses and collects them to be drained next time you change your oil. By not returning the blow-by to your oil pan, our kit prevents fouling of the oil that could reduce its effectiveness, leading to accelerated engine wear. Finally, a sintered bronze filter removes any remaining carbon from the crankcase gases so that only clean air returns to your intake. The Mishimoto Explorer ST catch can kit is a complete bolt-on blow-by solution including direct-fit hoses with quick-disconnect fittings and all mounting hardware necessary for a hassle-free installation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.

• Catch can captures blow-by, preventing it from fouling the engine oil
• Patented billet 6061 aluminum can sealed with Viton O-rings
• Protects intake valves from power-robbing carbon buildup

This Part Fits: