Fits select 1979-1986 Nissan 200SX, 510, and 720 models. This NGK ignition wire set is engineered to meet or exceed original equipment specifications for fitment, durability, and electrical performance.

These variable pitch magnetic core cables produce the necessary impedance to suppress interference across the entire frequency spectrum, ensuring exceptional EMI/RFI noise suppression. The dual-layer construction features an EPDM/silicone outer jacket and inner insulation to contain high-voltage currents and provide superior dielectric strength. For maximum reliability, the spark plug boots are bonded to the cable with a silicone sealer for a watertight seal, while the locking C-shaped spring clips ensure a positive terminal connection.

• Variable pitch resistor core for uniform resistance and maximum conductivity
• Stainless steel terminals with up to three serrated crimps for high retention strength
• Corrosion-resistant plating on terminal clips for long-lasting service life
• Heat-resistant silicone/EPDM jacket for durability in harsh engine environments
• Manufacturer Part Number: 8115

Fits select 2010-2018 Ford F-150, F-250 Super Duty, F-350 Super Duty, and E-350 Super Duty.

The NGK 48762 Ignition Coil is engineered to meet or exceed OE specifications, providing reliable spark for Ford Coil-on-Plug (COP) waste spark ignition systems. These coils are developed and rigorously tested in an ISO 17025 accredited laboratory to ensure peak performance under extreme thermal and electrical conditions. Replacing a failing or weak ignition coil helps restore engine efficiency, prevent misfires, and maintain consistent idle quality.

• Direct Replacement: Designed for an exact fit to the factory harness and mounting points for a hassle-free installation.
• Reliability: Subjected to extensive manufacturing tests to ensure long-term durability in high-heat engine bays.
• Design: Advanced COP (Coil-on-Plug) waste spark architecture for efficient voltage delivery.
• Quality Assurance: Manufactured and tested to withstand environments far beyond standard vehicle operation.
• MPN: 48762

Fits select 2012-2019 Ford, Lincoln, and Jaguar models, including Ford Focus, Fusion, Mustang, Explorer, Lincoln MKZ, and Jaguar XE.

The NGK 48770 Coil-on-Plug (COP) ignition coil is engineered to meet or exceed OE standards, providing reliable voltage output and consistent ignition performance. This high-durability coil is an ideal replacement for units suffering from thermal degradation or internal winding failure, which can cause misfires and poor fuel economy.

NGK leverages over 80 years of automotive experience to ensure every coil design performs reliably in extreme environments. Each unit is developed and rigorously tested in an ISO 17025 accredited laboratory to ensure it maintains electrical integrity far beyond standard operational conditions.

• Manufacturer Part Number: 48770
• Component Type: Coil-on-Plug (COP)
• Testing Standards: ISO 17025 accredited lab tested
• Performance: Designed to meet or exceed original equipment durability
• Construction: High-quality materials for superior thermal and electrical resistance

Fits select 2010-2018 Ford E-350, F-150, F-250 Super Duty, and F-350 Super Duty models (including SVT Raptor, King Ranch, and Lariat trims).

Restore reliable ignition and engine efficiency with the NGK COP (Waste Spark) Ignition Coil. These units are engineered to meet or exceed original equipment standards, providing a direct-fit solution that eliminates misfires and restores lost power. Each coil is rigorously tested in an ISO 17025 accredited laboratory to ensure it maintains consistent spark delivery even under extreme thermal and electrical stress.

• Precision Engineering: Manufactured to OE tolerances for high durability and operational performance.
• Extreme Testing: Validated under environmental conditions far exceeding standard vehicle operation.
• Direct Fit: Designed to install into the factory mounting position and connector without modification.
• Versatile Application: Supports both Coil-on-Plug and Waste Spark system configurations.
• Manufacturer Part Number: 48761

Fits select 2002-2018 Audi A8 Quattro, Bentley Bentayga, Continental, and Flying Spur, and Volkswagen Passat and Phaeton.

The NGK 48689 COP (Coil-on-Plug) Pencil Type Ignition Coil is engineered to meet or exceed original equipment standards, providing the precise voltage required for stable combustion and efficient engine performance. These coils are developed and rigorously tested in an ISO 17025 accredited laboratory to ensure durability under thermal and electrical conditions far exceeding standard vehicle operation.

Designed as a direct replacement for worn factory coils, the pencil-style configuration mounts directly over the spark plug to eliminate high-voltage ignition wires and minimize misfires. Every coil is manufactured with high-quality materials to resist the heat and vibration of high-performance engine bays.

• Direct OE Replacement: Precision-engineered for a perfect fit and reliable electrical connection.
• Extreme Testing: Validated in ISO 17025 labs to ensure performance under extreme temperatures.
• Pencil Type Design: Compact COP configuration for efficient energy transfer.
• Manufacturer Part Number: 48689

Fits 1997-1999 Acura NSX models, including Base, T, and Alex Zanardi Edition.

As the world's largest supplier of OEM oxygen sensors, NTK (a division of NGK Spark Plugs) manufactures the 24586 sensor to exacting standards. This direct-fit oxygen sensor is a critical component of your NSX's on-board diagnostic system, providing constant closed-loop feedback to the ECU to maintain the precise air-fuel ratio required for optimal engine performance and fuel efficiency.

Built with an advanced ceramic sensor element, this unit features a 3-stage contaminant-resistant plasma jet and a specialized deposit trap overcoat. These layers protect the sensor element from poisoning and buildup, ensuring a long service life and reliable communication with your OBDII system regarding catalytic converter efficiency and fuel delivery.

• Manufacturer Part Number: 24586
• Element Type: Advanced Ceramic with 3-stage plasma jet coating
• Protection: Integrated deposit trap overcoat to prevent element poisoning
• Function: Direct replacement for OE sensor to restore closed-loop ECU feedback
• Compatibility: Engineered for precise fitment on 1997-1999 Acura NSX applications

Fits 1985-1987 Toyota Corolla Sport GTS.

The NGK 9338 Spark Plug Wire Set is engineered to provide outstanding electrical conductivity and EMI/RFI noise suppression for peak ignition performance. Utilizing a variable pitch magnetic core, these cables produce the precise impedance required to suppress interference across the entire frequency spectrum. The construction features a high-quality EPDM/silicone outer jacket and inner insulation to contain high-voltage currents, ensuring excellent dielectric strength even in high-temperature engine bays.

• Watertight Seal: Spark plug boots are bonded to the NGK cable using a specialized silicone sealer to prevent moisture intrusion and electrical arcing.
• High Retention Terminals: Stainless steel terminals with up to three serrated crimps provide maximum grip on the cable jacket and insulation.
• Secure Fit: Features a locking C-shaped spring clip with corrosion-resistant plating for a positive, vibration-resistant connection to the spark plug.
• OE-Spec Design: Distributor and spark plug boots are manufactured to original equipment specifications for a precise fit and long-term durability.
• Limited Lifetime Warranty: Backed by NGK’s commitment to quality.

Fits 1989-1990 Nissan Pulsar NX and Sentra models. This NGK spark plug wire set (MPN 9181) is engineered to restore factory ignition performance while providing superior resistance to heat and electrical interference.

Built with variable pitch magnetic core technology, these cables create the necessary impedance to suppress EMI/RFI noise across the entire frequency spectrum without sacrificing spark energy. The outer jacket is constructed from a high-grade EPDM and silicone blend, providing excellent dielectric strength and durability against engine bay heat and chemicals. Each boot is bonded to the cable using a specialized silicone sealer to ensure a completely watertight seal, preventing moisture-related misfires.

• Variable pitch resistor cables for uniform resistance and conductivity
• High-temp EPDM/silicone outer jacket for superior insulation
• Corrosion-resistant stainless steel terminals with 3-serrated crimps for maximum retention
• Locking C-shaped spring clip ensures a secure, positive connection at the spark plug
• OE-specified boots for precise fitment and durability
• Manufacturer Part Number: 9181

Fits select 2008-2024 Audi, Ford, Lincoln, Mercury, and Porsche vehicles including R8, F-150, Mustang, and Cayenne.

As a leading supplier of OEM oxygen sensors, NTK (the sensor division of NGK) designs wideband Air-Fuel Ratio (A/F) sensors to provide the precise, linear output signal modern ECUs require. Unlike conventional switching sensors that only indicate rich or lean conditions, this 5-wire wideband sensor allows the vehicle's computer to determine the exact air-fuel ratio. This level of precision enables continuous adjustments to stay as close to stoichiometry as possible, maximizing fuel efficiency and engine performance while minimizing emissions.

• Advanced Ceramic Element: Features a 3-stage contaminant-resistant plasma jet and deposit trap overcoat to protect against element poisoning and extend service life.
• Precision Control: Manufactured from raw materials to finished product by NTK to ensure high-tolerance ceramic construction.
• Direct Fit: Includes the factory-style connector and wiring harness for a simple, plug-and-play installation into the OEM housing.
• Manufacturer Part Number: 24334
• Sensor Type: 5-Wire Wideband Air-Fuel Ratio

Fits select 1995-1999 Acura NSX, Honda Odyssey, and Isuzu Oasis models.

The NTK 24061 Direct Fit Oxygen Sensor is a critical component for maintaining your vehicle's on-board diagnostic system, ensuring optimal engine performance and maximizing fuel efficiency. As a leading manufacturer of OEM sensors, NTK utilizes an advanced ceramic sensor element to provide constant closed-loop feedback to the ECU. This allows for precise control of the air-fuel ratio while monitoring the efficiency of the catalytic converter and fuel delivery system.

Built to withstand harsh exhaust environments, this sensor features a 3-stage contaminant-resistant plasma jet and a deposit trap overcoat. This specialized construction protects the ceramic element from poisoning and premature failure, ensuring long-term reliability and accurate signal transmission.

• Precision Engineering: Advanced ceramic element controlled from raw material to finished product for superior performance.
• Contaminant Protection: Plasma jet and deposit trap overcoat prevent element poisoning and fouling.
• Direct Fit: Designed to replace factory sensors with OE application technology for a seamless installation.
• Emissions Control: Helps reduce harmful emissions by maintaining a precise air-fuel ratio.
• Manufacturer Part Number: 24061

Fits select 1991-1999 Dodge Stealth, Mitsubishi 3000GT, and Mitsubishi Diamante. This NGK Spark Plug Wire Set is engineered to provide reliable electrical conductivity and superior EMI/RFI noise suppression for high-performance V6 applications.

Constructed with a variable pitch magnetic core, these cables produce the impedance required to suppress interference across the entire frequency spectrum. The dual-layer insulation system utilizes an EPDM/silicone outer jacket to withstand extreme engine bay heat while maintaining excellent dielectric strength to contain high voltage currents. To ensure a weatherproof connection, the boots are glued to the cables with a silicone sealer for a watertight seal.

• Precision Fit: OE-specified boots ensure proper fitment on spark plugs and distributor terminals.
• Terminal Strength: Stainless steel terminals feature up to 3 serrated crimps for high retention strength.
• Secure Locking: Corrosion-resistant C-shaped spring clips provide a positive, vibration-resistant connection.
• EMI Suppression: Variable pitch resistor design protects sensitive vehicle electronics from electrical noise.
• Manufacturer Part Number: 8101

Fits 2001-2005 Mazda Miata models including Base, LS, Mazdaspeed, SE, and Shinsen.

Restore reliable ignition and engine performance with this NGK COP (Coil-on-Plug) waste spark ignition coil. Designed to meet or exceed original equipment standards, this coil addresses common misfire and hesitation issues on the NB2 Miata platform. Each unit is engineered with an integrated ignition module featuring precision wire bonding and mechanically soldered circuitry to ensure long-term durability against engine vibration and thermal cycling.

NGK validates these designs in ISO 17025 accredited test labs under conditions that far exceed standard operational environments. This direct-replacement part bolts to factory mounting points, ensuring a secure fit and a high-energy spark for optimal combustion.

• Manufacturer Part Number: 48915
• Coil Type: COP (Waste Spark) with integrated module
• Circuitry: Wire-bonded and mechanically soldered for vibration resistance
• Testing: Validated in ISO 17025 accredited labs
• Warranty: 3-year / 36,000-mile limited warranty

Fits select 1995-2004 Toyota 4Runner, Tacoma, Tundra, and T100 models.

The NGK 4412 Spark Plug Wire Set is engineered to meet or exceed OE specifications, providing superior electrical conductivity and durability for your Toyota ignition system. These cables feature a variable pitch magnetic core that creates the precise impedance necessary to suppress interference across the entire frequency spectrum, ensuring exceptional EMI/RFI noise suppression. Built for long-term reliability, the EPDM and silicone outer jackets provide excellent dielectric strength to contain high-voltage currents in extreme engine bay temperatures.

• Manufacturer Part Number: 4412
• High-Heat Construction: Outer EPDM/silicone jacket and inner insulation resist heat and oil while maintaining flexibility.
• Watertight Seal: Spark plug boots are chemically bonded to the cable with a silicone sealer to prevent moisture intrusion.
• Terminal Strength: Stainless steel terminals with up to three serrated crimps provide high retention strength to resist vibration.
• Positive Fitment: Corrosion-resistant, C-shaped spring clips ensure a secure, positive connection to the spark plug.
• Warranty: Manufacturer Limited Lifetime Warranty.

Fits 1988-1991 Honda Civic and CRX models (Base, DX, EX, LX, RT 4WD, Si, Wagovan, HF). This NGK ignition wire set is engineered to replace worn OE cables, restoring consistent spark delivery and engine performance.

Constructed with a variable pitch magnetic core, these cables produce the precise impedance required to suppress EMI/RFI noise across the entire frequency spectrum, protecting sensitive onboard electronics. The wires feature a dual-layer design with an inner insulation layer and an outer EPDM/silicone jacket, providing superior dielectric strength to contain high-voltage currents and resist engine bay heat.

• Manufacturer Part Number: 9988
• Cable Type: Variable pitch resistor magnetic core for noise suppression.
• Insulation: High-temp EPDM/silicone jacket resists moisture and heat breakdown.
• Terminal Design: Stainless steel terminals with up to three serrated crimps for maximum retention.
• Secure Connection: Locking C-shaped spring clips with corrosion-resistant plating ensure positive contact.
• Watertight Seal: Spark plug boots are bonded to the cable with a specialized silicone sealer.

Fits select 1989-1998 Dodge, Eagle, Hyundai, Mitsubishi, and Plymouth models.

The NGK 9634 Spark Plug Wire Set is engineered to provide outstanding electrical conductivity and EMI/RFI noise suppression for late-model import engines. Featuring a variable pitch magnetic core, these cables produce the specific impedance required to suppress interference across the entire frequency spectrum. The construction utilizes a dual-layer outer EPDM/silicone jacket and inner insulation to maintain high dielectric strength and contain high-voltage currents effectively.

• Variable pitch magnetic core for superior EMI/RFI noise suppression
• Durable EPDM/silicone jacket resists heat, oil, and chemical degradation
• Stainless steel terminals with up to 3 serrated crimps for maximum retention strength
• Locking C-shaped spring clips with corrosion-resistant plating for a secure terminal connection
• Silicone-sealed spark plug boots provide a watertight barrier for improved durability
• Manufacturer Part Number: 9634

Fits select 1992-1997 Honda Accord and 1992-1996 Honda Prelude S models. This NGK ignition wire set is engineered to meet or exceed original equipment standards for fit, performance, and durability.

The NGK 9578 set utilizes variable pitch magnetic core cables to produce the precise impedance required to suppress EMI/RFI noise throughout the frequency spectrum. Each cable features an outer EPDM and silicone jacket combined with inner insulation to provide maximum dielectric strength and contain high-voltage currents safely. For long-term reliability, the spark plug boots are bonded with a silicone sealer to ensure a watertight seal against moisture and contaminants.

• Precision Fit: OE-specified spark plug and distributor boots for a secure, factory-style installation.
• High-Strength Terminals: Stainless steel terminals featuring up to three serrated crimps for maximum cable retention.
• Secure Connection: Corrosion-resistant locking C-shaped spring clips ensure a positive terminal connection.
• Noise Suppression: Magnetic core technology eliminates interference with on-board electronics.
• Manufacturer Part Number: 9578

Fits select 1990-1993 Acura Integra (GS, LS, RS) and 1999-2001 Honda CR-V (EX, LX, SE).

The NGK 9259 Spark Plug Wire Set is engineered to meet or exceed original equipment standards, providing superior electrical conductivity and maximum EMI/RFI noise suppression. These cables utilize a variable pitch magnetic core to eliminate interference across the entire frequency spectrum, ensuring consistent ignition performance and protecting sensitive vehicle electronics.

Constructed for longevity in harsh engine environments, each cable features an outer EPDM/silicone jacket and high-strength inner insulation to maintain dielectric strength. The spark plug boots are bonded to the cable with a silicone sealer for a watertight seal, while stainless steel terminals utilize up to three serrated crimps to ensure the highest possible retention strength.

• Variable Pitch Magnetic Core: Provides high impedance for exceptional noise suppression.
• Durable Jacketing: EPDM/silicone construction resists high voltage leakage and heat degradation.
• Secure Fit: Locking C-shaped spring clips with corrosion-resistant plating provide a positive terminal connection.
• Watertight Seals: Silicone-glued boots prevent moisture intrusion at the plug and distributor.
• Specifications: Manufacturer Part Number 9259; Includes high-quality spark plug and distributor boots.
• Warranty: Limited Lifetime Warranty (see package for details).

Fits 1990-2000 Mazda Miata models including 10th Anniversary, Base, LE, LS, M Edition, SE, and STO.

This NGK 9160 spark plug wire set is engineered to provide superior electrical conductivity and durability for your Mazda Miata's ignition system. These cables utilize a variable pitch magnetic core to produce the precise impedance required to suppress EMI/RFI noise across the entire frequency spectrum, ensuring clean signals for your vehicle's electronics without sacrificing spark energy.

Built for the harsh environment of an engine bay, the wires feature an outer EPDM/silicone jacket and high-grade inner insulation for maximum dielectric strength and heat resistance. The spark plug boots are bonded to the cable using a silicone sealer to create a permanent, watertight barrier against moisture. Corrosion-resistant stainless steel terminals feature up to three serrated crimps for high retention strength, while the locking C-shaped spring clips ensure a secure, vibration-resistant connection at the spark plug terminal.

• Manufacturer Part Number: 9160
• Material: High-temp EPDM and silicone jacket for superior dielectric strength
• Core Technology: Variable pitch magnetic core for interference suppression
• Terminals: Stainless steel with serrated crimps and locking C-shaped spring clips
• Sealing: Silicone-glued boots for a durable, watertight connection
• Warranty: Limited Lifetime Warranty included

Fits 1991-1994 Nissan 240SX (Base, LE, and SE).

Restore ignition performance and ensure consistent electrical conductivity with this NGK spark plug wire set. These variable pitch resistor cables are engineered to meet or exceed OE specifications, featuring a magnetic core that produces the precise impedance required to suppress EMI/RFI interference across the entire frequency spectrum. The outer EPDM/silicone jacket combined with inner insulation provides superior dielectric strength to contain high-voltage currents and resist engine bay heat.

Construction details include stainless steel terminals with up to three serrated crimps to ensure maximum terminal retention. The spark plug boots are bonded to the cable using a silicone sealer for a completely watertight seal, while a locking C-shaped spring clip with corrosion-resistant plating provides a secure, positive connection to the spark plug.

• Manufacturer Part Number: 9136
• Stock Number: NX96
• Variable pitch magnetic core for interference suppression
• High-temp EPDM/silicone outer jacket
• Watertight silicone-sealed boots
• Stainless steel terminals with serrated crimps for high retention strength
• Limited Lifetime Warranty

Fits 1989-1990 Nissan 240SX SE and XE models.

NGK variable pitch resistor cables are engineered to provide uniform resistance and outstanding electrical conductivity for consistent ignition performance. These cables feature a magnetic core that produces the specific impedance required to suppress EMI/RFI noise across the entire frequency spectrum, protecting sensitive onboard electronics. Each wire is built with a dual-layer insulation system, utilizing an EPDM/silicone outer jacket and inner insulation for superior dielectric strength and heat resistance.

• Precision Terminals: Stainless steel terminals utilize up to three serrated crimps to bite into the cable jacket for maximum retention strength.
• Positive Connection: Features a locking C-shaped spring clip with corrosion-resistant plating to ensure a secure and vibration-resistant spark plug terminal connection.
• Watertight Seal: Spark plug boots are bonded to the NGK cable using a high-grade silicone sealer to provide a watertight seal and prevent flashover.
• Direct Replacement: Designed to meet or exceed OE specifications for fitment, durability, and electrical performance.

Technical Specifications:

• Manufacturer Part Number: 9125
• Jacket Material: EPDM/Silicone
• Core Type: Variable Pitch Magnetic
• Terminal Material: Stainless Steel
• Compatibility: 1989-1990 Nissan 240SX

Fits 1993-1995 Mazda RX-7 (Base, R1, R2, and Touring). This NGK Spark Plug Wire Set is engineered to provide superior electrical conductivity and durability for the FD-generation RX-7 rotary engine.

Built with variable pitch magnetic core cables, this set provides the necessary impedance to suppress EMI/RFI interference across the entire frequency spectrum. The construction features an outer EPDM/silicone jacket and robust inner insulation to contain high-voltage currents, providing excellent dielectric strength even in high-heat engine environments.

• Precision Boots: OE-quality spark plug and distributor boots ensure a watertight seal, utilizing a silicone sealer for maximum moisture protection.
• Secure Terminals: Stainless steel terminals feature up to three serrated crimps for high retention strength, preventing vibration-related loosening.
• Positive Connection: Locking C-shaped spring clips with corrosion-resistant plating ensure a secure, snap-fit connection to the spark plug.
• Magnetic Core Technology: Delivers uniform resistance and outstanding conductivity to optimize ignition performance.
• Manufacturer Part Number: 8159
• Warranty: Limited Lifetime Warranty (see manufacturer packaging for details).

Fits select 1994-1999 Eagle Talon and Mitsubishi Eclipse/Galant models.

NGK variable pitch magnetic core spark plug wire sets (8100) are engineered to deliver maximum electrical conductivity while providing superior EMI/RFI noise suppression. These cables utilize a specialized variable pitch winding to create the impedance necessary to suppress interference across the entire frequency spectrum, protecting sensitive vehicle electronics without sacrificing ignition performance.

• Superior Insulation: Dual-layer construction featuring a high-dielectric inner insulation and a rugged EPDM/silicone outer jacket to withstand extreme engine bay heat and prevent voltage arcing.
• Watertight Seal: Spark plug boots are bonded to the wire with a high-grade silicone sealer, ensuring a moisture-proof seal and preventing terminal corrosion.
• High-Retention Terminals: Corrosion-resistant stainless steel terminals utilize up to three serrated crimps to bite into the cable jacket for maximum retention strength.
• Positive Connection: Locking C-shaped spring clips provide a secure and positive terminal connection to the spark plug and distributor.
• Manufacturer Part Number: 8100

Fits select 1994-2001 Acura Integra (GS, LS, RS, Special Edition) and 1997-1998 Honda CR-V (EX, LX).

This NGK Spark Plug Wire Set (MPN: 8041) is engineered to deliver precise electrical conductivity and superior EMI/RFI noise suppression for your ignition system. Built with a variable pitch magnetic core, these cables produce the specific impedance required to suppress interference across the entire frequency spectrum, ensuring reliable performance in demanding conditions.

• Variable pitch resistor design provides uniform resistance and outstanding electrical conductivity.
• Outer EPDM/silicone jacket and inner insulation provide high dielectric strength and extreme temperature resistance.
• Spark plug boots are sealed with silicone for a completely watertight connection.
• Stainless steel terminals utilize up to three serrated crimps to ensure maximum terminal retention.
• Corrosion-resistant C-shaped spring clips provide a secure, positive connection at the spark plug terminal.
• Designed to meet or exceed OE specifications for fit, performance, and durability.

Fits 1992-2000 Honda Civic and 1993-1995 Honda Civic del Sol (CX, DX, EX, GX, LX, Si, VX, and Value Package).

This NGK Spark Plug Wire Set is engineered to provide superior electrical conductivity and exceptional noise suppression for Honda B-Series and D-Series engines. Featuring a variable pitch magnetic core, these cables produce the specific impedance required to suppress EMI/RFI interference across the entire frequency spectrum, ensuring clean signal delivery for modern engine electronics.

Constructed for longevity in high-heat engine bays, each cable features an outer EPDM and silicone jacket combined with inner insulation for high dielectric strength. The spark plug boots are bonded to the cables with a specialized silicone sealer to create a watertight, moisture-resistant seal. Stainless steel terminals utilize up to three serrated crimps to bite into the cable jacket, ensuring maximum terminal retention and a secure connection to the distributor and spark plugs.

• Manufacturer Part Number: 8034
• Core Type: Variable pitch magnetic core for EMI/RFI suppression
• Insulation: High-temp EPDM/Silicone outer jacket
• Terminals: Corrosion-resistant stainless steel with C-shaped locking spring clips
• Fitment: OE-specified boots for a precise, factory-style fit
• Durability: Watertight silicone-sealed boots

Fits 1993-2001 Honda Prelude Base, Type SH, and VTEC models.

The NGK 8019 Spark Plug Wire Set is engineered to provide superior electrical conductivity and exceptional EMI/RFI noise suppression. Utilizing a variable pitch magnetic core, these cables produce the necessary impedance to eliminate interference across the entire frequency spectrum. The construction features an EPDM/silicone outer jacket and high-quality inner insulation to contain high-voltage currents and provide excellent dielectric strength against under-hood heat and chemicals.

• Precision Fit: OE-specified spark plug and distributor boots ensure a secure, durable fit for the H22-series engines.
• Watertight Seal: Spark plug boots are bonded to the cable with a silicone sealer to prevent moisture intrusion.
• High Retention Terminals: Corrosion-resistant, C-shaped spring clips and stainless steel terminals with up to three serrated crimps provide maximum terminal retention.
• Optimized Resistance: Variable pitch resistor cables ensure uniform resistance for consistent ignition performance.
• Construction: High-durability EPDM and silicone materials for long-term reliability.

Manufacturer Part Number: 8019. Limited lifetime warranty included (see package for details).

Fits select 1992-2001 Acura Integra (GS-R, Type R), Honda Civic (Si), and Honda Civic del Sol (VTEC).

The NGK 8018 Spark Plug Wire Set is engineered to meet or exceed original equipment specifications, providing a reliable path for high-voltage current while minimizing electromagnetic interference. These wires utilize a variable pitch magnetic core to suppress EMI/RFI noise across the entire frequency spectrum, ensuring clean signal delivery without compromising ignition performance. Built for the demands of high-revving VTEC engines, this set provides a precision fit and superior dielectric strength.

• Advanced Construction: Dual-layer insulation with an outer EPDM/silicone jacket protects against heat, oil, and chemical degradation.
• Watertight Seal: Spark plug boots are permanently bonded to the cable with a silicone sealer to prevent moisture intrusion and voltage leaks.
• High-Strength Terminals: Corrosion-resistant stainless steel terminals use up to three serrated crimps for maximum retention and electrical contact.
• Secure Fitment: Locking C-shaped spring clips ensure a positive, vibration-resistant connection to the spark plug.
• MPN: 8018

Fits select 1998-2005 Lexus GS300, IS300, SC300, and Toyota Supra models. NGK variable pitch resistor cables are engineered to provide uniform resistance and superior electrical conductivity, ensuring consistent ignition performance.

These cables feature a high-quality EPDM and silicone outer jacket combined with inner insulation for maximum dielectric strength. The variable pitch magnetic core is specifically designed to produce the necessary impedance to suppress EMI/RFI noise across the entire frequency spectrum. To ensure a durable, watertight seal, the spark plug boots are glued to the cable using a specialized silicone sealer.

• Manufacturer Part Number: 6404
• Stainless steel terminals with up to 3 serrated crimps for high retention strength
• Locking C-shaped spring clip with corrosion-resistant plating for secure connections
• Magnetic core technology for exceptional noise suppression
• OE-specified boot designs for precise fitment and heat resistance
• Limited Lifetime Warranty

Fits 1990-1994 Lexus LS400 and 1992-1994 Lexus SC400 Base models.

This premium NGK spark plug wire set (MPN 6403) is engineered to restore ignition efficiency and suppress electrical interference in your Lexus V8 engine. Utilizing a variable pitch magnetic core, these cables produce the precise impedance required to eliminate EMI/RFI noise across the entire frequency spectrum, protecting sensitive onboard electronics. The outer EPDM and silicone jackets provide superior dielectric strength and thermal resistance to withstand the high-voltage demands and harsh temperatures of the engine bay.

• Durable Construction: High-quality insulation ensures excellent voltage containment and long-term reliability.
• Watertight Seals: Spark plug boots are glued to the cable with a specialized silicone sealer to prevent moisture intrusion.
• Secure Connections: Stainless steel terminals feature up to three serrated crimps for maximum retention, while C-shaped spring clips with corrosion-resistant plating ensure a positive connection to the plug.
• Specifications: Variable pitch resistor technology; Limited Lifetime Warranty (see package for details).

Part Number: 6403

Fits select 2001-2018 Infiniti, Nissan, and Suzuki vehicles (including Altima, Frontier, Maxima, Titan, Pathfinder, and QX56).

NGK 58913 Coil-on-Plug (COP) boots serve as the critical insulated link between the ignition coil and the spark plug. Over time, extreme engine heat and electrical stress degrade factory rubber boots, leading to "flashover"—a condition where spark energy arcs to the engine block instead of the spark plug, causing misfires and poor fuel economy. These premium replacement boots are built to stringent tolerances to ensure a moisture-tight seal and reliable voltage delivery.

• Manufactured using premium silicone for superior heat resistance and long-term durability.
• Includes all required internal springs and ferrite resistors to ensure maximum RFI noise suppression.
• Direct fitment provides original equipment (OE) design and outstanding sealing properties.
• Replacing boots during spark plug service helps prevent ignition tracking and performance loss.
• Manufacturer Part Number: 58913
• Limited Lifetime Warranty.

Fits select 2001-2005 Mazda Miata, Protege, and Protege5.

NGK 5659 spark plug wire sets are engineered to provide maximum conductivity and interference suppression for reliable ignition performance. These cables feature a variable pitch magnetic core that produces the necessary impedance to eliminate EMI/RFI noise throughout the entire frequency spectrum. The outer EPDM/silicone jacket and inner insulation provide superior dielectric strength, containing high-voltage currents while resisting heat and chemical degradation under the hood.

Built for durability, the spark plug boots are glued to the cable with a silicone sealer to ensure a watertight seal. The stainless steel terminals utilize up to three serrated crimps to bite into the insulation for maximum retention strength, while corrosion-resistant C-shaped spring clips provide a secure, positive connection to the spark plug.

• Variable pitch magnetic core for exceptional EMI/RFI noise suppression
• EPDM and silicone outer jacket for heat and dielectric resistance
• Watertight silicone-sealed boots for moisture protection
• Stainless steel terminals with serrated crimps for high retention
• Locking C-shaped spring clip ensures a vibration-proof connection
• Manufacturer Part Number: 5659