The OMP HC0-0733-B01 Steel Side Mount Seat Brackets provide a rigid, reliable mounting solution for competition seats featuring lateral attachment points. These brackets are engineered for performance and safety, ensuring the seat remains securely fixed to the vehicle floor or seat sliders while allowing for necessary ergonomic adjustments.

• Constructed from high-strength 3mm thick steel for maximum rigidity
• Durable black powder-coated finish for long-lasting corrosion resistance
• Multi-hole lateral attachment design allows for height and tilt angle customization
• Compatible with a wide range of side-mount racing seats
• Manufacturer Part Number: HC0-0733-B01

The OMP Universal Seat Mounting Sliding Rail Kit HC0-0665 provides a heavy-duty solution for adding fore and aft adjustability to performance and racing seats. Designed for universal application, these sliders allow drivers to precisely set their seating position relative to the steering wheel and pedals for improved ergonomics and control.

This kit features a dual-locking mechanism to ensure the seat remains securely locked in place during high-G maneuvers or impact, meeting the safety requirements of performance driving. The low-profile design helps maintain a low center of gravity and preserves headroom in vehicles with tight cabin tolerances or roll cages.

• Manufacturer Part Number: HC0-0665
• Dual-locking mechanism for enhanced safety and seat stability
• Smooth-action ball bearing sliders for easy adjustment
• Universal hole pattern compatible with most aftermarket seat bases
• Sturdy steel construction with a durable finish

Please note: As a universal component, this kit may require vehicle-specific brackets or minor modifications for installation depending on your floor pan or seat subframe configuration.

Enhance driver comfort and maintain optimal posture with the OMP Lumbar Seat Cushion (HB0-0662-071). Specifically engineered for racers and performance enthusiasts, this cushion provides targeted lower-back support to reduce fatigue during long track sessions or extended street driving.

This ergonomic insert is designed for versatile use in most racing bucket seats and high-performance aftermarket seats. Its durable construction helps maintain its shape and supportive properties over time, while the neutral black finish integrates seamlessly with your vehicle's interior.

• Provides essential lumbar support to improve driving ergonomics
• Reduces lower back strain and driver fatigue
• Universal application for various racing and performance seats
• Color: Black
• Manufacturer Part Number: HB0-0662-071

The OMP First Series seat is a dedicated performance component designed for drivers who require reliable lateral support and precise ergonomic positioning. This black competition-style seat (HA0-0790-A01-071) is engineered to provide a stable platform during high-performance driving and track use, helping to keep the driver planted behind the wheel.

• Brand: OMP
• Series: First Series
• Color: Black
• Manufacturer Part Number: HA0-0790-A01-071
• Application: Optimized for performance driving and motorsport environments
• Durable upholstery designed for high-frequency use

The OMP TRS Series Racing Seat is a performance-oriented seating solution designed for drivers seeking a balance of ergonomic support and durability. This Size XL variant is engineered with larger dimensions to accommodate a wider range of driver profiles while maintaining the lateral containment necessary for high-performance driving.

Finished in a resilient black fabric, this seat integrates seamlessly into racing cockpits and track-ready builds. It features dedicated harness slots to accommodate multi-point restraint systems, ensuring the driver remains securely positioned. The TRS Series is a staple for competitive use where reliability and driver stability are paramount.

• Series: TRS Series
• Seat Type: Racing Seat
• Color: Black
• Size: XL
• Manufacturer Part Number: HA0-0781-B01-071

The OMP HTE Series 400 is a professional-grade competition seat engineered for maximum lateral support and driver safety. Featuring a gel-coated fiberglass shell, this seat incorporates an integrated head restraint (halo system) designed to significantly reduce lateral head movement and improve protection during high-impact scenarios.

Upholstered in breathable Airtex material, the HTE Series 400 optimizes airflow to the driver, maintaining comfort during endurance stints. The seat design includes high side bolsters for superior containment and removable back and leg cushions to allow for fine-tuned driver positioning.

• Manufacturer Part Number: HA0-0780-B01-071
• Shell Material: Gel-coated fiberglass construction
• Safety Feature: Integrated head restraint for lateral impact protection
• Fabric: Highly breathable Airtex upholstery
• Mounting Type: Side mount configuration for precise height and rake adjustment
• Removable split-leg cushions for customized ergonomic support

The OMP WRC Series racing seat is a professional-grade competition seat engineered for maximum lateral support and driver ergonomics during high-intensity rally and circuit racing. This XL version is specifically designed to provide a wider fitment without compromising the structural integrity or safety standards required for sanctioned competition.

Constructed from a gel-coated fiberglass shell, the WRC Series features high side bolsters for superior containment and a removable leg cushion to allow for personalized driver positioning. The shell is equipped with five large harness slots to accommodate various belt configurations, including 5-point and 6-point racing harnesses.

• FIA 8855-1999 Homologated
• Rigid fiberglass shell construction with black gel-coat finish
• Size: XL (Extra Large) for increased driver comfort
• Removable back, base, and leg cushions
• High side bolsters for optimum lateral support
• Side-mounted installation (requires compatible seat brackets)
• Manufacturer Part Number: HA0-0778-B01-071

The OMP WRC Series fiberglass seat is a dedicated competition seat engineered for the rigors of professional motorsport. Featuring a rigid fiberglass shell construction, this seat (MPN: HA0-0773-B01-071) provides the structural integrity and lateral support required for high-performance driving environments.

• Brand: OMP
• Series: WRC
• Manufacturer Part Number: HA0-0773-B01-071
• Shell Material: Fiberglass
• Color: Black
• Designed for competition use with large harness slots and high side bolsters

The OMP Champ-R Series Seat is a purpose-built competition seat engineered for maximum lateral support and driver stability. Constructed with a rigid, lightweight fiberglass shell, this seat is designed to provide the structural integrity required for high-performance track environments. The ergonomic shape is complemented by removable leg cushions, allowing drivers to fine-tune their seating position for optimal control and comfort.

• High side bolsters for superior lateral containment during high-G cornering
• Large harness slots to accommodate various multi-point racing restraint systems
• Upholstered in durable black fabric with breathable material in key contact areas
• Rigid fiberglass shell construction for weight reduction and safety
• Designed for side-mount installation to the vehicle chassis or seat brackets
• Manufacturer Part Number: HA0-0766-B01-071

The OMP TRS-E Series seat is a versatile, entry-level competition seat designed for racers who require FIA-certified safety and support. Built around a robust tubular steel frame, this seat provides a stable and secure driving position suitable for a wide range of motorsport applications. The design balances cockpit space-saving with driver ergonomics, making it a reliable choice for track days or competitive racing.

The seat is upholstered in wear-resistant Jacquard fabric to ensure longevity through frequent use. Large shoulder harness slots are integrated to accommodate various driver heights and are compatible with HANS devices and multi-point harness systems. For installation flexibility, the TRS-E features dual mounting options, allowing for both side and bottom mounting to accommodate different seat brackets and vehicle floor pans.

• Manufacturer Part Number: HA0-0741-B01-071
• Homologation: FIA 8855-1999
• Frame Material: Tubular steel
• Mounting Points: Side (Type W) and Bottom (Type Y)
• Upholstery: Durable Jacquard fabric
• Removable leg cushion for improved driver comfort

The OMP First Series safety harness is a competition-ready 4-point restraint system designed for track use and clubman-level racing. Engineered for driver security, this harness utilizes 3-inch wide webbing across both the shoulder and lap straps to optimize pressure distribution and improve occupant retention during high-G maneuvers.

This entry-level professional harness features durable steel adjusters for precise fitment and a reliable quick-release buckle mechanism. It is fully homologated to the FIA 8854/98 standard, ensuring it meets strict safety requirements for sanctioned motorsport events where a 4-point configuration is permitted.

• Harness Type: 4-point restraint system
• Webbing Width: 3-inch shoulder and lap straps
• Certification: FIA 8854/98 homologated
• Hardware: High-strength steel adjusters
• Color: Black
• Manufacturer Part Number: DA0-0801-B01-071

The OMP First series safety harness is an essential component for competitive motorsport, delivering reliable restraint performance and meeting the rigorous FIA 8853-2016 safety standard. This entry-level professional harness features 2-inch webbing throughout, optimized for use with FHR (HANS) devices to ensure driver safety during high-impact scenarios.

Equipped with high-strength steel adjusters, the harness utilizes a pull-up configuration for the lap belts, allowing for quick and precise tensioning while seated in the cockpit. The assembly is designed for durability and ease of use in diverse racing environments.

• Manufacturer Part Number: DA0-0208-A01-071
• Certification: FIA 8853-2016 Approved
• Webbing Width: 2 inches
• Adjustment: Pull-up lap belts with steel adjusters
• Color: Black
• Hardware: High-strength steel construction

The OMP First series safety harness is a professional-grade 6-point restraint system engineered for clubman competition and frequent track use. Constructed with high-strength polyester webbing, this harness features 2-inch straps for both the shoulders and the lap to ensure a secure, comfortable fit that is fully compatible with HANS and other FHR (Frontal Head Restraint) devices.

This specific model utilizes durable steel adjusters for reliable tensioning under load. The pull-up lap strap configuration is ideal for tight cockpits where space is limited, allowing the driver or co-driver to easily tighten the harness by pulling the adjusters toward the buckle. The assembly is anchored by a high-specification aircraft-style quick-release buckle for fast and reliable operation.

• Manufacturer Part Number: DA0-0208-A01-061
• Homologation: FIA 8853-2016 certified
• Configuration: 6-Point harness
• Webbing Width: 2-inch (50mm) shoulder and lap straps
• Adjustment Style: Pull-up lap straps
• Hardware: High-strength steel adjusters
• Mounting: Includes eyebolts for secure installation
• Color: Red

The OMP First 3/2 Racing Harness is a high-performance 6-point safety system designed for track use and competitive racing. The "3/2" designation indicates a specialized shoulder strap design where the 3-inch webbing tapers to 2 inches at the top, providing a more secure and comfortable fit when used with HANS and other Frontal Head Restraint (FHR) devices.

Built for durability and ease of use, this harness features steel adjusters for quick tensioning and a robust central rotary quick-release buckle for rapid exit. The polyester webbing is engineered to provide maximum security under high-G loads, ensuring the driver remains properly positioned in the seat.

• Brand: OMP
• Series: First 3/2
• Part Number: DA0-0204-B02-071
• Color: Black
• Configuration: 6-Point Harness
• Strap Specs: 3" shoulder straps tapering to 2" for HANS compatibility
• Hardware: High-strength steel adjusters and quick-release rotary buckle