Fits 1996-2001 Honda Civic (CX, DX, EX, GX, HX, LX, and Value Package).

The Power Stop Autospecialty Drum and Shoe Kit is a comprehensive solution designed to restore original braking performance to your vehicle's rear drum system. This all-in-one package eliminates the guesswork of sourcing individual components by providing a matched set of drums, shoes, and all necessary installation hardware. The included Evolution Premium Coated brake drums are specifically engineered to resist corrosion and rust, maintaining a clean look behind your wheels while ensuring consistent braking surfaces.

This kit is ideal for daily drivers requiring a reliable, bolt-on replacement for worn factory components. Each component is manufactured to strict tolerances for a precise fit and quiet operation. The inclusion of new adjusters and a complete spring/hold-down kit ensures that the entire drum assembly functions like new, preventing common issues like uneven shoe wear or dragging.

• Manufacturer Part Number: KOE15309DK
• Evolution Premium Coated Drums: Features a protective coating to prevent rust and corrosion.
• Complete Brake Shoes: Precision-ground for immediate break-in and reliable friction.
• Full Hardware Set: Includes all necessary springs, hold-downs, and pins for a complete service.
• Adjuster Kits: New star-wheel adjusters included to maintain proper shoe-to-drum clearance.
• Ceramic Lubricant: High-temperature brake grease included for all metal-to-metal contact points.

Fits 2020-2021 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, and WT).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers is engineered for heavy-duty applications where factory braking performance isn't enough. Designed specifically for the 2020-2021 Chevrolet Silverado 3500 HD, this kit provides the extra bite needed for hauling heavy loads, towing trailers, and navigating steep mountain grades. This comprehensive front-axle solution replaces worn OE components with high-performance hardware that manages heat more effectively and reduces brake fade under stress.

The included Z36 Carbon-Fiber Ceramic brake pads offer severe-duty stopping power while maintaining low-dust performance and everyday drivability. These are paired with drilled and slotted rotors that maximize cooling and sweep away gas and debris. The red powder-coated calipers provide a durable barrier against corrosion while adding a custom look to your truck's front end. This kit is a complete, bolt-on performance upgrade that includes all necessary hardware for a straightforward installation.

• Carbon-fiber reinforced ceramic brake pads for increased friction and thermal stability.
• Drilled and slotted rotors to optimize heat dissipation and prevent glazing.
• Silver zinc plating on rotors to protect against rust and oxidation.
• Electrostatic powder-coated calipers for long-lasting durability and corrosion resistance.
• Premium stainless steel installation hardware and high-temperature lubricant included.
• Direct bolt-on fitment using existing factory mounting points.
• Manufacturer Part Number: KC8670A-36

Fits 2017-2025 Honda CR-V models, including Hybrid EX, Hybrid Sport, EX, EX-L, LX, and Touring trims.

The Power Stop K7528 Z23 Evolution Sport Rear Brake Kit is a complete bolt-on upgrade designed to improve stopping power and thermal efficiency for your daily driver. This engineered system replaces factory components with high-performance materials that reduce brake dust and eliminate noise without requiring any vehicle modifications.

• Carbon-Fiber Ceramic Pads: The Z23 compound significantly enhances braking torque and features a low-dust formula validated by third-party testing to produce 30% less dust than original equipment.
• Drilled and Slotted Rotors: Precision-drilled holes allow for maximum cooling during heavy use, while slots sweep away gas and debris to maintain consistent pad contact.
• Corrosion Resistance: Each rotor is silver zinc plated to protect against rust and corrosion, ensuring long-term durability and a clean appearance.
• Quiet Performance: Multi-layer rubberized shims insulate the pads to provide virtually noise-free braking.
• Complete Hardware Kit: Includes premium stainless-steel installation hardware and high-temperature ceramic brake lubricant for a professional-grade installation.

Manufacturer Part Number: K7528

Fits select 2009-2025 Mercedes-Benz (A, C, E, G, GLA, GLC, GLE, S-Class, AMG, and Maybach) and 2017-2019 Infiniti QX30 models.

The Power Stop Euro-Stop SW-1656 Electronic Brake Pad Wear Sensor is a precision-engineered replacement designed to restore the functionality of your vehicle's brake monitoring system. When brake pads wear down to a critical level, these sensors complete a circuit to trigger the dashboard warning light, ensuring you perform maintenance before rotor damage or safety issues occur. Built to meet or exceed original equipment standards, this sensor ensures a seamless fit and reliable electrode conductivity under high-heat braking conditions.

• Manufacturer Part Number: SW-1656
• Thermal Reliability: Tested at 500°F to ensure consistent performance in extreme braking environments.
• OEM Standard Construction: Includes application-specific grommets, mounting clips, and cable protection sleeves.
• Weatherproof Design: Features water-tight connections to prevent corrosion and false signaling.
• Direct Fit: Engineered for easy installation with no modifications required to the factory harness.

Fits select 2008-2021 Lexus NX200t, NX300, NX300h, RX350, RX450h and Toyota Highlander and Sienna models.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (K4713) provides a complete bolt-on solution to enhance the braking performance of your daily driver. This kit replaces worn factory components with a matched set of pads, rotors, and hardware designed to improve stopping power while reducing brake dust and noise. The Z23 carbon-fiber ceramic compound is engineered for a significant performance increase over traditional ceramic pads, validated by 3rd-party testing to produce 30% less dust than original equipment.

The included performance rotors are precision drilled and slotted to facilitate maximum cooling and gas venting, keeping temperatures down during repeated stops. Each rotor is finished with silver zinc plating to protect against rust and corrosion, maintaining both performance and aesthetics behind your wheels. Multi-layer rubberized shims ensure a virtually noise-free braking experience by damping vibrations.

• Carbon-fiber ceramic Z23 compound for superior thermal stability and low-dust performance.
• Drilled and slotted rotors for enhanced cooling and debris removal.
• Zinc-plated rotors for maximum corrosion resistance.
• Multi-layer rubberized shims for quiet, noise-free operation.
• Complete bolt-on installation; no vehicle modifications required.
• Includes stainless-steel hardware and high-temperature ceramic brake lubricant.
• Manufacturer Part Number: K4713

The Power Stop KOE2580 Autospecialty Z17 Stock Replacement Front Brake Kit provides a complete, bolt-on solution to restore the braking performance of your daily driver. This kit is engineered to meet original equipment standards, featuring a matched set of Autospecialty brake rotors and Z17 Evolution Plus ceramic pads for a reliable, noise-free repair. Fits select 1970-1981 Buick, Cadillac, Chevrolet, GMC, Oldsmobile, and Pontiac models.

• Z17 Evolution Plus Ceramic Pads: Low-dust formula validated through 3rd party on-vehicle testing to ensure cleaner wheels and consistent stopping power.
• Autospecialty Brake Rotors: Non-coated OE-style replacement rotors are mill-balanced to ensure smooth rotation and vibration-free operation.
• Noise Reduction: Equipped with multi-layer rubberized shims for virtually silent braking.
• Complete Installation Kit: Includes premium stainless-steel hardware and high-temperature ceramic brake lubricant to ensure a proper, long-lasting installation.
• Direct Fit: Designed as a direct bolt-on replacement for factory components with no modifications required.
• Manufacturer Part Number: KOE2580

Fits 1996-2002 Toyota RAV4 Base.

The Power Stop Autospecialty Stock Replacement Drum and Shoe Kit provides a complete, bolt-on solution for restoring factory-level braking performance to your vehicle's rear axle. This all-in-one kit eliminates the guesswork of sourcing individual components by providing matched drums and shoes designed for a precise fit and reliable service life.

The kit features Evolution Premium Coated brake drums, which are specifically engineered to resist corrosion and maintain a clean appearance behind your wheels. These are paired with high-quality brake shoes and a comprehensive hardware set to ensure a quiet, chatter-free installation. To assist with the service, Power Stop also includes high-temperature ceramic brake lubricant for all critical contact points.

• Evolution Premium Coated Drums: Engineered for durability and maximum rust resistance.
• Complete Hardware: Includes a full set of springs and hold-down components for a professional installation.
• Ceramic Lubricant: High-temperature brake grease included to prevent noise and facilitate smooth shoe movement.
• MPN: KOE15297DK
• Included Components: 2 Coated Brake Drums, Rear Brake Shoe Set, Spring/Hold-down Kit, and Ceramic Lubricant.

Fits select 1961-1996 GM vehicles including Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models.

Power Stop Autospecialty Brake Shoes (MPN B245) are engineered as a precision replacement for factory drum brakes, restoring consistent stopping power to your classic or late-model vehicle. These shoes utilize a semi-metallic friction formula that is post-cured, a process that increases braking performance and shortens the necessary break-in period for new linings.

Every shoe is precision cam ground to ensure an exact fit within the brake drum, maximizing surface contact and preventing uneven wear. The friction material is chamfered to eliminate noise and chatter during engagement. Constructed from 100% new steel, the shoes are finished with a specialized coating to resist rust and maintain structural integrity over time.

• Manufacturer Part Number: B245
• Material: Post-cured semi-metallic formula for enhanced stopping power
• Construction: 100% new steel cores with rust-resistant coating
• Installation: Precision cam ground for proper drum fitment
• Noise Control: Chamfered edges to prevent chatter and squealing
• Compliance: 100% asbestos-free and copper-free formula

Fits select 2007-2020 Cadillac Escalade/XTS, Chevrolet Silverado/Tahoe/Suburban/Express/Avalanche, and GMC Sierra/Yukon/Savana.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers (KC2069-36) is engineered for vehicles that face the added stress of towing, hauling, and steep mountain descents. This front-axle kit replaces worn OE components with a severe-duty system designed to improve thermal stability and stopping power without sacrificing daily drivability. The low-dust Carbon-Fiber Ceramic pads are validated through third-party testing to produce 30% less dust than original equipment, keeping your wheels cleaner for longer.

Every kit includes high-performance drilled and slotted rotors that maximize heat dissipation, which is critical during heavy-duty use. The included calipers are treated with a high-temperature red powder coating to resist corrosion and provide a custom look behind the wheels. This complete bolt-on system requires no modifications and includes all necessary stainless-steel hardware and high-temp ceramic lubricant for a professional installation.

• Proprietary Z36 Pads: Carbon-Fiber Ceramic compound specifically formulated for heavy loads and oversized tires.
• Drilled & Slotted Rotors: Precision-machined for maximum cooling and finished with zinc plating for rust protection.
• Red Powder Coated Calipers: Durable high-temp finish provides long-lasting corrosion resistance.
• Stainless Steel Hardware: Includes premium shims and installation clips to handle increased braking temperatures.
• Manufacturer Part Number: KC2069-36
• Validated Performance: On-vehicle dust testing completed in Los Angeles for real-world reliability.

Fits select 1993-2010 Lexus GS300, GS400, GS430, IS300, SC430, and Toyota Supra (Base). This Power Stop Z23 Evolution Sport brake pad kit is engineered as a performance upgrade for daily drivers looking for increased stopping power without the noise and dust of traditional metallic pads.

These pads feature a carbon-fiber infused ceramic formula that maintains a high friction coefficient for improved bite while preserving everyday drivability. Each pad is manufactured using positive mold technology for uniform friction density and even wear. The thermal scorched surface ensures a faster break-in period, while chamfered and slotted edges minimize vibration. To ensure longevity, the backing plates are powder-coated to resist corrosion in harsh environments.

• Carbon-fiber ceramic formula for superior stopping power and low dust
• Multi-layer rubberized shims provide virtually noise-free braking
• Thermal scorched pad surface for rapid bed-in
• Powder-coated backing plates resist rust and corrosion
• Includes premium stainless steel hardware, pin bushings, and ceramic lubricant
• Manufacturer Part Number: Z23-619

Fits select 2017-2025 Honda CR-V (Gas, Hybrid, and e:FCEV models).

The Power Stop Z16 Evolution ceramic brake pads offer a reliable, low-dust braking solution for daily drivers. Designed as an affordable stock replacement, these pads utilize a ceramic formula that maximizes stopping power while keeping wheels clean and eliminating annoying brake squeal. Each pad is manufactured using OE-style positive mold technology to ensure uniform friction density and consistent wear throughout its service life.

To simplify the installation process, the pad surfaces are thermal scorched for a fast break-in, allowing for immediate performance. The backing plates are finished with a premium powder coating to resist rust and corrosion, while multi-layer rubberized shims provide virtually noise-free operation by isolating vibration.

• Ceramic Friction Formula: Engineered for low-dust performance to keep wheels cleaner for longer.
• Noise-Free Design: Chamfered and slotted pads paired with multi-layer rubberized shims eliminate brake noise.
• Positive Mold Technology: Ensures consistent friction performance and uniform pad wear.
• Thermal Scorched Surface: Facilitates a faster break-in period for immediate stopping power.
• Corrosion Protection: Powder-coated backing plate resists rust and environmental damage.
• MPN: 16-2037

Fits 2000-2009 Honda S2000 Base and CR models.

Power Stop S2730 Rear Powder Coated Brake Calipers are engineered as a direct bolt-on replacement for factory hardware, combining performance reliability with a custom look. Each caliper is treated with a durable, electrostatic high-temperature red powder coat that resists rust and corrosion, significantly extending service life compared to untreated cast components.

Every caliper (MPN: S2730) undergoes 100% pressure testing and inspection to verify piston operation and seal integrity. These units arrive fully assembled with new high-temperature EPDM rubber dust boots, premium lubricants, and all necessary hardware for a complete installation. The package includes mounting brackets and the mechanical parking brake assembly, complete with adjusting hardware, actuating levers, and return springs.

• Electrostatic high-temperature red powder coating for rust and corrosion resistance
• 100% pressure tested to ensure reliable braking performance
• Premium high-temperature EPDM rubber boots for long-term durability
• Includes new brackets, bleeder screws, guide pins, and stainless-steel abutment hardware clips
• Complete mechanical parking brake assembly with all necessary levers and springs
• Direct bolt-on fitment requiring no vehicle modifications
• Manufacturer Part Number: S2730

The Power Stop Z36 Truck & Tow Brake Upgrade Kit (KC1858-36) is engineered for 1995-2002 Ford Explorer, Ranger, and Mercury Mountaineer owners who demand superior stopping power while towing, hauling, or navigating steep terrain. This complete rear brake solution replaces worn factory components with a severe-duty system designed to manage the heat and stress of heavy loads and oversized tires.

• Z36 Carbon-Fiber Ceramic Pads: Reinforced compound provides high-torque stopping power without the high dust levels of traditional semi-metallic pads; validated to produce 30% less dust than OE brakes.
• Drilled & Slotted Rotors: Precision-machined to maximize heat dissipation and prevent brake fade during long mountain descents. Finished in silver zinc plating for maximum corrosion resistance.
• Red Powder Coated Calipers: Remanufactured in Chicago, IL, these calipers feature a high-temperature red powder coating that resists rust and provides a custom look behind the wheels.
• Premium Hardware: Includes stainless-steel pad shims, high-temperature ceramic lubricant, and all necessary installation hardware for a direct bolt-on fitment.

Fits: Select 1995-2002 Ford Explorer, 2001-2002 Ford Explorer Sport, 1998-2002 Ford Ranger, and 1997-2001 Mercury Mountaineer.

Specifications:
- Position: Rear
- Series: Z36 Truck & Tow
- Pad Material: Carbon-Fiber Ceramic
- Rotor Finish: Zinc Plated
- Caliper Color: Red Powder Coat
- MPN: KC1858-36

Fits select 2010-2024 Subaru BRZ, Legacy, and Outback, Toyota 86 and GR86, and Scion FR-S.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (K5883) is a comprehensive rear brake solution engineered for enthusiasts who want more from their daily commute. This bolt-on kit replaces factory components with performance-tuned hardware designed to increase stopping power without sacrificing street manners. The Z23 Carbon-Fiber Ceramic pads provide a higher coefficient of friction than standard ceramic pads while reducing brake dust by approximately 30% compared to original equipment.

Each kit features drilled and slotted rotors that keep temperatures down during repeated braking by allowing gas and heat to escape. The silver zinc plating protects the rotor vanes and hubs against corrosion. To ensure a quiet ride, Power Stop includes multi-layer rubberized shims that insulate against vibration and noise.

• Z23 Carbon-Fiber Ceramic compound significantly enhances braking performance over traditional ceramic
• Drilled and slotted rotors provide maximum cooling and debris evacuation
• Silver zinc plating for maximum protection against rust and corrosion
• Multi-layer rubberized shims provide virtually noise-free braking
• Complete rear set includes stainless steel hardware and high-temperature ceramic lubricant
• Manufacturer Part Number: K5883

Fits 2022-2024 Infiniti QX60 (Autograph, Luxe, Pure, Sensory) and 2022-2024 Nissan Pathfinder (Platinum, Rock Creek, S, SL, SV).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit (K9206-36) is engineered for vehicles that face the added stress of towing, hauling, and navigating steep mountain grades. This front-axle kit provides the severe-duty stopping power required for heavy loads without compromising the smooth operation needed for daily driving. By combining reinforced friction materials with high-efficiency cooling, this bolt-on kit replaces worn OE components with a performance-oriented solution.

This kit features proprietary Carbon-Fiber Ceramic Z36 brake pads, which offer significantly higher thermal stability than standard ceramic pads to handle increased weight. These are paired with precision drilled and slotted rotors that maximize heat dissipation and sweep away gas and debris to prevent brake fade. To ensure long-term reliability in harsh environments, each rotor is finished with silver zinc plating to resist rust and corrosion.

• Carbon-Fiber Ceramic Pads: Severe-duty compound reinforced with carbon fibers for maximum braking torque and low-dust performance.
• Drilled & Slotted Rotors: Performance rotors designed for maximum cooling; silver zinc plated to protect against rust.
• Stainless Steel Hardware: Includes premium shims and installation hardware to resist high temperatures and ensure quiet operation.
• Direct Fit: Engineered as a bolt-on upgrade for factory braking systems with no modifications required.
• Validation: Low-dust braking performance validated through independent 3rd-party on-vehicle testing.

The K9206-36 kit includes a pair of drilled and slotted front rotors, a complete set of Z36 front brake pads, stainless-steel hardware, and high-temperature ceramic brake lubricant.

Fits select 2019-2021 Hyundai Veloster and 2020-2023 Kia Forte GT.

The Power Stop Z23 Evolution Sport Rear Brake Kit (K8331) is engineered to provide a significant performance upgrade for daily drivers. This complete rear axle kit replaces stock rotors and pads with performance-matched components designed to increase stopping power without sacrificing street drivability. The Z23 carbon-fiber ceramic compound provides a firm pedal feel and is validated through 3rd-party testing to produce an average of 30% less dust compared to original equipment.

The included performance rotors feature precision-drilled holes for maximum cooling and slots to clear away debris, ensuring a clean contact patch and consistent braking. To prevent rust and maintain a clean appearance behind your wheels, each rotor is finished with a protective silver zinc plating. The kit includes all necessary stainless steel hardware and premium rubberized shims to ensure noise-free operation.

• Z23 carbon-fiber ceramic brake pads for high-performance stopping with low dust
• Drilled and slotted rotors for superior thermal management and gas dissipation
• Silver zinc plating for maximum corrosion resistance
• Multi-layer rubberized shims for virtually silent braking
• Direct bolt-on fitment with no vehicle modifications required
• Includes premium stainless steel hardware and high-temperature lubricant
• Manufacturer Part Number: K8331

Fits select 1988-1999 Chevrolet K1500, Tahoe, and Blazer models. This Power Stop Autospecialty Stock Replacement Rear Drum and Shoe Kit provides a complete, high-quality solution for restoring factory braking performance and reliability. The kit is designed to replace worn original equipment components with precision-engineered parts that meet or exceed OE standards.

This all-in-one package features Power Stop Evolution Premium Coated brake drums, which are treated to resist rust and corrosion for a longer service life and improved aesthetics. The matched brake shoes are paired with a comprehensive hardware set, ensuring a quiet, consistent pedal feel and dependable stopping power. By including the adjusters and spring kits, this kit eliminates the need to source individual components during a brake overhaul.

• Complete rear brake service kit includes drums, shoes, and installation hardware.
• Power Stop Evolution Premium Coated drums provide superior rust protection.
• High-temperature ceramic brake lubricant included to prevent noise and binding.
• Kit components: (2) Coated Brake Drums, Brake Shoe Set, Spring/Hold-down Hardware Kit, and Adjuster Kits.
• Manufacturer Part Number: KOE15329DK

Fits select 2005-2018 Honda CR-V and Acura RDX. The Power Stop Z17 Evolution Geomet Coated Brake Kit provides a complete, bolt-on solution for refreshing your vehicle's rear braking system with components engineered for daily reliability.

This kit addresses common issues like brake dust buildup and rotor corrosion. The Z17 Evolution ceramic pads utilize a low-dust formula, validated through independent third-party testing to ensure clean wheels and consistent stopping power. To manage noise, the pads are equipped with multi-layer rubberized shims that effectively dampen vibrations. The included rotors are fully treated with Genuine GEOMET 360 coating, providing a durable barrier against rust and corrosion without impacting braking performance.

• Z17 Low-Dust Ceramic Pads: Formulated for quiet, clean operation and validated through real-world traffic testing.
• GEOMET 360 Rotors: Fully coated surfaces protect against rust, maintaining a clean appearance behind open-spoke wheels.
• Quiet Braking: Multi-layer rubberized shims insulate against brake squeal and noise.
• Complete Hardware Kit: Includes stainless steel installation hardware and high-temperature ceramic brake lubricant for a professional service.
• MPN: CRK206

Fits 2001-2006 Jeep Wrangler models with rear drum brakes.

These Power Stop Autospecialty brake shoes (SSH769) are engineered as a high-quality direct OE replacement, featuring a semi-metallic friction formula designed for reliable stopping power and durability. To ensure a smooth installation and quiet operation, these shoes are precision cam ground for exact drum fitment and chamfered to eliminate chatter and brake noise. The backing plates are made from 100% new steel and coated for superior rust resistance, while the post-cured friction material reduces break-in time. This kit includes a premium hardware set, providing the necessary components to refresh your rear braking system.

• Semi-metallic formula is post-cured for shorter break-in and consistent power.
• Precision cam ground for maximum contact and proper fit within the drum.
• Chamfered edges prevent noise, vibration, and harshness (NVH).
• 100% new steel construction with a rust-resistant protective coating.
• Asbestos-free and copper-free composition for environmental compliance.
• Includes premium installation hardware kit.
• Manufacturer Part Number: SSH769

Fits 1958 Chevrolet Yeoman (Rear).

Power Stop Autospecialty Brake Shoes (SSH55) are engineered to meet strict OEM standards, providing a reliable and quiet braking solution for your rear drum system. These shoes feature a semi-metallic friction formula that is post-cured for increased stopping power and a significantly reduced break-in period. Each shoe is manufactured from 100% new, rust-resistant coated steel and precision cam-ground to ensure exact contact with the drum surface.

To ensure a smooth and quiet operation, these shoes are chamfered to eliminate noise and chatter during engagement. This kit includes a premium hardware set, providing the necessary components to complete a professional-grade brake service. Power Stop ensures all friction materials are 100% asbestos-free and copper-free for environmental safety and consistent performance.

• Semi-metallic formula post-cured for improved braking power
• Precision cam-ground for optimal shoe-to-drum contact
• Chamfered edges prevent vibration-induced noise and chatter
• Includes a complete premium hardware kit for simplified installation
• Constructed from 100% new steel with a rust-resistant coating
• 100% asbestos-free and copper-free friction material
• Manufacturer Part Number: SSH55

Fits 2013-2021 Nissan Sentra models equipped with rear drum brakes.

Power Stop Autospecialty brake shoes are engineered to meet strict OEM standards for reliable daily braking performance. These shoes feature a semi-metallic friction formula that is post-cured to provide increased stopping power and a significantly reduced break-in period. Each shoe is precision cam-ground to ensure an exact fit within the drum, while chamfered edges help prevent noise and chatter during engagement.

Constructed from 100% new steel, these brake shoes are treated with a specialized coating to resist rust and corrosion. This kit (SSH1046L) includes a premium hardware set, providing the necessary components for a complete and efficient installation. All materials are 100% asbestos-free and copper-free for environmentally conscious performance.

• Semi-metallic formula post-cured for shorter break-in time
• Precision cam-ground for exact drum fitment
• Chamfered design prevents brake noise and chatter
• 100% new steel construction with rust-resistant coating
• Asbestos-free and copper-free friction material
• Includes premium hardware installation kit
• Manufacturer Part Number: SSH1046L

Fits 2015-2022 Ford Mustang models (Front Left).

The Power Stop Evolution Drilled and Slotted rotor (AR85159XL) is an essential upgrade for drivers looking to improve braking performance and thermal management. This rotor is engineered as a direct bolt-on replacement for the factory unit, featuring precision-drilled holes that significantly reduce operating temperatures during spirited driving. The rounded slots serve to sweep away gas, moisture, and brake dust, ensuring a clean contact patch between the pad and rotor surface to minimize brake fade.

• Direct fit replacement for original equipment front left rotors
• Precision-drilled holes for maximum cooling and heat dissipation
• Rounded slots maintain a clean pad surface and improve wet-weather performance
• Silver zinc dichromate plating helps prevent rust and corrosion
• Part Number: AR85159XL

Fits select 2005-2020 Cadillac Escalade/XTS, Chevrolet Silverado/Tahoe/Suburban/Express/Avalanche, and GMC Sierra/Yukon/Savana.

Power Stop S4918A Performance Brake Calipers are engineered for enthusiasts looking for a bolt-on upgrade that balances aesthetics with reliable stopping power. These front calipers are treated with a high-temperature electrostatic red powder coating that provides superior resistance to rust and corrosion while maintaining a sharp appearance behind your wheels. Every unit is 100% pressure tested to verify proper piston operation and ensure leak-free performance.

This pair comes fully assembled with mounting brackets and all necessary hardware, allowing for a direct replacement of your factory calipers without modifications. Built with premium EPDM rubber seals and high-quality lubricants, these calipers are designed to withstand harsh temperatures and road conditions for long-term service life.

• Manufacturer Part Number: S4918A
• Finish: Electrostatic high-temperature red powder coating
• Hardware Included: Mounting brackets, stainless steel pad attachment clips, and bleeder screws
• Seals: New high-temp EPDM rubber dust boots and seals
• Build: 100% pressure tested and inspected for hydraulic integrity
• Lubrication: Premium silicone lubricant used for smooth caliper slide operation

Fits 2021-2024 Nissan Rogue (S, SV, SL, Platinum, and Midnight Edition).

Power Stop Z17 Evolution Plus ceramic brake pads are engineered as a direct stock replacement for drivers seeking a clean, quiet, and reliable braking experience. These pads utilize a low-dust ceramic formula that maximizes stopping power while keeping wheels free of unsightly brake debris. Each pad is manufactured using OE positive mold technology to ensure uniform friction density and consistent performance throughout the service life of the part.

The pads feature multi-layer rubberized shims and a chamfered and slotted design to effectively dampen vibration and eliminate noise. To streamline installation, the Z17 series includes a thermal scorched surface for a faster break-in period and a powder-coated backing plate to resist rust and corrosion in harsh environments.

• Low-dust ceramic formula designed to keep wheels clean
• Thermal scorched pad surface for rapid break-in
• OE positive mold technology for consistent wear and friction density
• Powder-coated backing plate provides superior corrosion resistance
• Multi-layer rubberized shims for virtually noise-free operation
• Chamfered and slotted to ensure quiet braking
• Includes premium stainless steel hardware for a complete installation
• Manufacturer Part Number: 17-2375

Fits select 2020-2024 Hyundai Venue and Kia Soul models. This Power Stop KOE8686 Autospecialty Z17 Stock Replacement Brake Kit provides a comprehensive, bolt-on solution for daily drivers requiring original equipment standards. The kit includes matched front and rear components to refresh your vehicle's entire braking system with a focus on low-dust and noise-free operation.

• Z17 Evolution Plus ceramic brake pads feature a low-dust formula validated through third-party on-vehicle testing.
• Autospecialty OE-style non-coated replacement rotors are precision mill-balanced to prevent vibration and ensure a smooth ride.
• Multi-layer rubberized shims facilitate virtually noise-free braking by dampening harmonic vibrations.
• Complete installation package includes stainless steel hardware and high-temperature ceramic brake lubricant.
• Designed as a direct stock replacement for factory-installed brake systems.

Fits select 1987-1996 Ford Bronco and 1987-1989 Ford F-150. This Power Stop Autospecialty Stock Replacement Drum and Shoe Kit (KOE15453DK) provides a complete, bolt-on solution for restoring rear braking performance and reliability. Engineered as a direct replacement for worn OE components, this kit eliminates the hassle of sourcing individual parts by bundling everything required for a professional drum brake overhaul.

• Evolution Premium Coated Drums: Features a protective coating to resist rust and corrosion, maintaining a clean look behind your wheels.
• Complete Brake Shoes: Precision-ground shoes designed for consistent friction contact and reliable stopping power.
• Installation Hardware: Includes a full spring/hold-down kit and adjuster kits to replace fatigued or seized factory components.
• Ceramic Lubricant: High-temperature brake lubricant included to ensure smooth operation and prevent noise.
• Fitment-Specific: Designed for rear axle applications on 1987-1996 Ford full-size trucks and SUVs.

Fits 2011 Chevrolet Silverado 2500 HD/3500 HD and 2011 GMC Sierra 2500 HD/3500 HD (All Trims).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit (KC5559-36) is a complete front-end solution engineered specifically for high-demand applications. Whether you are towing heavy trailers, hauling materials to a jobsite, or navigating steep mountain grades, this kit provides the thermal management and clamping force required for heavy-duty trucks. This bolt-on upgrade replaces factory components with performance-matched hardware designed to handle the added stress of lifted trucks and oversized tires.

• Z36 Carbon-Fiber Ceramic Pads: Proprietary compound offers severe-duty stopping power while maintaining low-dust performance, validated in 3rd party tests to produce 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-drilled holes and rounded slots maximize heat dissipation and clear gas and debris for consistent pad contact during high-temperature braking.
• Powder Coated Calipers: Includes brand new calipers finished in a high-temperature red powder coating to resist corrosion and provide a custom look behind the wheels.
• Zinc Plating: Rotors are finished in silver zinc plating to protect against rust and oxidation in harsh environments.
• Complete Installation Hardware: Comes with stainless-steel hardware, high-temp shims, and ceramic brake lubricant for a noise-free, reliable install.

Manufacturer Part Number: KC5559-36

Fits select 2003-2009 Infiniti G35 and Nissan 350Z, Murano, and Quest.

Power Stop S2792 red powder-coated brake calipers provide a complete, bolt-on solution for replacing worn or corroded factory units. These rear calipers are engineered to maintain original equipment fit and function while offering enhanced durability and a performance-oriented aesthetic. Each unit undergoes a 100% pressure test to verify piston seal integrity and ensure reliable hydraulic performance under load.