Fits select 2010-2024 Toyota 4Runner, 2010-2014 Toyota FJ Cruiser, and 2010-2023 Lexus GX460.

Power Stop Evolution drilled and slotted rotors (JBR1396XPR) provide a direct bolt-on upgrade to improve cooling and braking performance. Precision cross-drilled for maximum heat dissipation, these rear rotors prevent brake fade during extreme conditions. The rounded slots effectively sweep away gasses, dust, and moisture to maintain a clean friction contact patch between the pad and rotor surface.

• Precision cross-drilled holes for maximum cooling and optimum thermal performance
• Rounded slots minimize stress cracking and evacuate debris for consistent pad contact
• Silver zinc dichromate plating protects against rust and corrosion on non-friction surfaces
• Direct OE fitment ensures a straightforward installation with no modifications required
• Manufactured to strict tolerances for Disc Thickness Variation (DTV) and runout for smooth, quiet operation
• 100% dynamic mill balanced to prevent vibration
• Weight and vane count matched to original equipment specifications for reliable performance
• Sold as a pair for the rear axle (MPN: JBR1396XPR)

Fits select 2007-2022 Toyota Tundra, Sequoia, Land Cruiser, and Lexus LX570.

Power Stop Evolution drilled and slotted rotors provide a direct bolt-on performance upgrade for your vehicle's braking system. These rotors are precision-machined to improve cooling and maintain a clean friction contact patch between the pad and rotor surface. The cross-drilled holes allow for maximum heat dissipation during heavy braking, while the rounded slots effectively sweep away gas, dust, and moisture.

Built to strict tolerances for Disc Thickness Variation (DTV) and runout, these rotors ensure smooth, quiet operation. Each rotor is 100% dynamic mill balanced and features a silver zinc dichromate plating to protect against rust and corrosion. These rotors are designed to match original equipment weight and vane counts for reliable fit and thermal performance without the need for modifications.

• Precision cross-drilled for maximum cooling and heat dissipation
• Rounded slots sweep away debris for consistent pad contact
• Silver zinc dichromate plating resists rust and corrosion
• Chamfered drill holes to minimize stress cracking
• 100% dynamic mill balanced for smooth, vibration-free performance
• Direct OE fitment with no modifications required
• Sold as a pair for the front axle
• Manufacturer Part Number: JBR1309XPR

Fits select 2018-2024 Subaru WRX and WRX STI (TR, Base, Limited, S209, and Type RA).

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK8482) is a complete front-end solution for daily drivers seeking a clean, quiet, and corrosion-resistant brake refresh. This kit pairs Z17 Evolution ceramic brake pads with rotors treated with a genuine GEOMET 360 coating to prevent rust and maintain a like-new appearance behind open-spoke wheels. The ceramic pad formula is engineered for low-dust performance, validated through third-party on-vehicle testing to keep wheels cleaner for longer durations than standard OE pads.

Each kit includes premium stainless-steel hardware and multi-layer rubberized shims to insulate noise for virtually silent operation. The rotors are manufactured to original equipment specifications for precise fitment and balance, ensuring a smooth pedal feel without sacrificing stopping power. This comprehensive kit provides everything needed for a successful installation, including high-temperature ceramic brake lubricant.

• Low-Dust Ceramic Formula: Z17 Evolution pads are third-party validated to minimize brake dust.
• GEOMET 360 Coating: Fully coated rotors protect against rust and corrosion without impacting braking performance.
• Noise Reduction: Multi-layer rubberized shims provide a quiet, vibration-free commute.
• Complete Hardware Kit: Includes stainless-steel abutment clips and ceramic lubricant.
• OE Fitment: Rotors manufactured to match factory dimensions and tolerances for 2018-2024 Subaru WRX/STI applications.
• MPN: CRK8482

Fits 2018-2024 Toyota Camry L, LE, SE, and SE Nightshade. This Power Stop Z17 Evolution Geomet Coated Brake Kit provides a complete solution for refreshing rear braking performance on daily-driven vehicles.

This comprehensive kit (MPN CRK7905) is engineered as an affordable, direct-replacement upgrade to original equipment. It features Z17 Evolution ceramic brake pads with a low-dust formula validated through third-party on-vehicle testing in heavy city traffic to keep wheels cleaner for longer. The included rotors are fully treated with a Genuine GEOMET 360 coating, providing a durable barrier against rust and corrosion without impacting braking efficiency. To ensure quiet operation, the pads are equipped with multi-layer rubberized shims that effectively insulate noise and vibration.

• Low-Dust Braking: Z17 Evolution ceramic pads maintain wheel cleanliness and provide consistent stopping power.
• Corrosion Protection: Geomet 360 coating on rotors prevents rust, ideal for vehicles with open-spoke wheels.
• Quiet Performance: Multi-layer rubberized shims ensure virtually silent operation.
• Complete Hardware: Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant.
• OE Specifications: Rotors are manufactured to precise factory dimensions for a bolt-on installation.

Fits select 2018-2024 Toyota Avalon, Camry, C-HR, Corolla Cross, RAV4, Venza, and Lexus ES250, ES300h, ES350, UX200, and UX250h models.

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK7895) is a complete front-end solution designed to restore original braking performance while protecting against corrosion. This kit includes Z17 Evolution low-dust ceramic brake pads, Geomet 360 coated brake rotors, and all necessary stainless steel installation hardware for a clean, professional service.

The included brake rotors are fully treated with a genuine GEOMET 360 coating, which provides a durable barrier against rust and corrosion without impacting braking efficiency. This is particularly beneficial for vehicles with open-spoke wheels where rotor appearance is visible. To ensure quiet operation, the Z17 ceramic pads utilize multi-layer rubberized shims to insulate against noise and vibration.

• Low-dust ceramic formula validated through 3rd-party on-vehicle testing in urban traffic conditions.
• Genuine GEOMET 360 rotor coating prevents rust and maintains a clean appearance.
• Rotors manufactured to OE specifications for precise fit and balance.
• Multi-layer rubberized shims for virtually silent, noise-free braking.
• Includes stainless steel hardware and high-temperature ceramic brake lubricant.
• Manufacturer Part Number: CRK7895

Fits select 2017-2023 Subaru Crosstrek and Impreza models including Base, Premium, Sport, Limited, and Hybrid trims.

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK7892) provides a complete, bolt-on solution for daily-driven vehicles requiring refreshed braking performance and long-term corrosion resistance. This kit is engineered to replace worn OE rotors and pads with upgraded components that maintain a clean look and quiet operation. Each rotor is fully treated with a Genuine GEOMET 360 coating, which protects the internal vanes and external surfaces against rust and oxidation without impacting stopping distance.

• Z17 Low-Dust Ceramic Pads: Formulated to eliminate brake dust and maintain wheel cleanliness, validated through 3rd-party on-vehicle testing.
• GEOMET 360 Coating: Provides a durable barrier against rust and corrosion, ideal for open-spoke wheels.
• Noise Reduction: Multi-layer rubberized shims insulate against vibration for virtually silent braking.
• Complete Installation Kit: Includes premium stainless-steel hardware and high-temperature ceramic brake lubricant.
• Precision Fit: Manufactured to original equipment specifications for a direct, hassle-free installation.

Manufacturer Part Number: CRK7892

Fits 2016-2021 Honda Civic (EX, EX-L, EX-T, LX, LX-P, Sport, Sport Touring, and Touring).

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK7725) provides a complete rear axle solution for daily-driven vehicles, combining low-dust ceramic pads with corrosion-resistant rotors. This kit is designed to restore factory braking performance while upgrading the aesthetic and longevity of your braking system. The rotors feature a genuine GEOMET 360 coating across the entire surface to prevent rust and corrosion, making them an ideal choice for vehicles with open-spoke wheels.

The included Z17 Evolution ceramic brake pads utilize a low-dust formula that has been 3rd-party validated in real-world traffic conditions to keep wheels cleaner for longer. For noise reduction, these pads are equipped with multi-layer rubberized shims that insulate against vibration. Each kit is a direct bolt-on replacement for original equipment components and includes all necessary stainless-steel hardware for a professional installation.

• Z17 Evolution low-dust ceramic brake pads for cleaner, quieter stopping
• Fully GEOMET 360 coated rotors protect against rust and oxidation
• Multi-layer rubberized shims effectively dampen braking noise
• Rotors manufactured to OE specifications for precise fitment and balance
• Includes premium stainless-steel hardware and high-temperature lubricant
• Manufacturer Part Number: CRK7725

Fits select 2016-2024 Mazda CX-5 and CX-9 models including 2.5 Turbo, Grand Touring Reserve, and Signature trims. Designed as a comprehensive solution for daily-driven vehicles, the Power Stop Z17 Evolution Geomet Coated Rotor Brake Kit (CRK7690) provides everything needed for a front-axle brake service, including pads, rotors, and premium hardware.

The Z17 Evolution ceramic brake pads feature a low-dust formula validated through 3rd-party testing in Los Angeles City Traffic to ensure clean wheels and reliable stopping power. Each pad is equipped with multi-layer rubberized shims to dampen vibrations and provide virtually noise-free braking. The included rotors are fully treated with Genuine GEOMET 360 coating, which protects against rust and corrosion on both internal and external surfaces without compromising braking performance. These rotors are manufactured to original equipment specifications for a precise, bolt-on fit.

• Z17 Low-Dust Ceramic Pads: Formulated to reduce brake dust and noise for a cleaner, quieter commute.
• GEOMET 360 Coated Rotors: Thin-film corrosion protection extends rotor life and maintains a clean appearance behind open-spoke wheels.
• Stainless Steel Hardware: Includes all necessary clips and high-temperature ceramic brake lubricant for a complete installation.
• OE Specifications: Precision-machined rotors and shims ensure factory-level fitment and operation.
• MPN: CRK7690

Fits select 2016-2022 Acura ILX and Honda Accord (Sport/Touring) and Civic Si models. The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK7347) is an all-in-one solution for daily drivers looking to restore original braking performance while preventing unsightly corrosion. This front-axle kit replaces your worn OE components with a complete set of low-dust ceramic pads, fully coated rotors, and premium hardware.

• Z17 Evolution Ceramic Pads: Feature a low-dust ceramic formula validated through independent 3rd-party on-vehicle testing to keep wheels cleaner for longer.
• Geomet 360 Coated Rotors: Each rotor is treated with a genuine Geomet 360 coating to protect against rust and corrosion on both internal and external surfaces without compromising stopping power.
• Noise Reduction: Dual-layer rubberized shims insulate the brake pads to provide virtually silent operation and eliminate squealing.
• Complete Installation: Includes stainless steel hardware clips and high-temperature ceramic brake lubricant to ensure a smooth, professional installation.
• Direct OE Replacement: Rotors are manufactured to original equipment specifications for a precise bolt-on fit with no modifications required.

Manufacturer Part Number: CRK7347

Fits select 2014-2020 Cadillac Escalade, Chevrolet Silverado 1500, Tahoe, Suburban, and GMC Sierra 1500, Yukon, Yukon XL.

The Power Stop Z17 Evolution Geomet Coated Rear Brake Kit (CRK6562) provides a complete, bolt-on solution for refreshing the braking system on your daily-driven truck or SUV. This kit is engineered to restore original equipment braking performance while addressing the common issues of excessive brake dust and rotor oxidation. Each component is designed to work as a matched system for consistent stopping power and a quiet ride.

The Z17 Low-Dust ceramic brake pads feature a formula validated through 3rd-party on-vehicle testing to keep your wheels cleaner for longer. To ensure silent operation, the pads utilize multi-layer rubberized shims that effectively dampen noise. The included rotors are fully treated with a Genuine GEOMET 360 coating, which provides a durable barrier against rust and corrosion without impacting braking performance or pad bed-in.

• Z17 Low-Dust ceramic formula keeps wheels free of brake dust
• Genuine GEOMET 360 coating protects the entire rotor surface against corrosion
• Multi-layer rubberized shims provide virtually noise-free braking
• Rotors manufactured to OE specifications for precise fit and balance
• Includes stainless steel installation hardware and high-temperature ceramic lubricant
• Manufacturer Part Number: CRK6562

Fits select 2012-2018 Toyota Camry, Avalon, and Lexus ES300h/ES350 models. This Power Stop Z17 Evolution Geomet Coated Brake Kit is an all-in-one solution for refreshing the braking performance on your daily-driven vehicle. Engineered as a direct bolt-on replacement for original equipment components, this rear kit (MPN CRK6520) includes everything needed for a complete installation.

• Genuine GEOMET 360 Rotors: Each rotor is fully coated with a thin layer of GEOMET 360 to protect against rust and corrosion without impacting braking performance.
• Z17 Low-Dust Ceramic Pads: Validated through independent third-party testing in Los Angeles city traffic, these ceramic pads keep wheels cleaner for longer.
• Noise Reduction: Features multi-layer rubberized shims that effectively insulate noise for virtually silent operation.
• Complete Hardware Kit: Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant.
• Fitment Compliance: Manufactured to original equipment specifications for a precise fit and reliable stopping power.

Fits 2013-2022 Honda Accord EX, EX-L, LX, Sport, Touring, Hybrid, and Plug-In models.

The Power Stop Z17 Evolution Geomet Coated Brake Kit provides a complete front-axle solution for daily drivers looking to restore original braking performance while eliminating excessive dust and noise. This kit is engineered as a direct bolt-on replacement for factory components, ensuring a precise fit and straightforward installation.

The included brake rotors are fully treated with a genuine GEOMET 360 coating. This thin-film zinc flake coating protects the entire rotor surface, including the cooling vanes, against rust and corrosion without impacting braking performance. The Z17 Evolution ceramic brake pads feature a low-dust formula that has been 3rd-party validated in real-world traffic conditions to keep wheels cleaner. To ensure quiet operation, the pads are equipped with multi-layer rubberized shims that effectively insulate noise and vibration.

• Genuine GEOMET 360 coating provides long-lasting protection against corrosion and rust.
• Z17 Low-Dust ceramic formula keeps wheels cleaner for longer periods.
• Multi-layer rubberized shims provide virtually silent braking.
• Rotors manufactured to original equipment specifications for weight, vane count, and cooling.
• Complete kit includes stainless-steel installation hardware and high-temperature ceramic lubricant.
• Manufacturer Part Number: CRK6515

Fits select 2010-2022 Lexus CT200h, Toyota Prius, Prius Plug-In, and Prius Prime.

The Power Stop Z17 Evolution Geomet Coated Rear Brake Kit (CRK5503) is a complete solution designed to restore and upgrade the braking performance of your daily-driven hybrid. This kit replaces worn factory components with low-dust ceramic pads and rust-resistant rotors, solving the common issues of brake squeal, unsightly rotor corrosion, and excessive wheel dust.

The included Z17 ceramic brake pads feature a low-dust formula validated through third-party testing in heavy traffic conditions to ensure cleaner wheels. These pads are equipped with multi-layer rubberized shims that insulate noise for virtually silent operation. The rotors are fully treated with a genuine GEOMET 360 coating, which protects the rotor surface and internal vanes against rust and corrosion without compromising stopping power. Each rotor is manufactured to OE specifications for a precise fit and reliable balance.

• Low-Dust Ceramic Pads: Z17 Evolution pads keep wheels cleaner for longer; formula is third-party validated for performance.
• GEOMET 360 Coating: Entire rotor surface is treated to prevent rust, maintaining a clean look behind open-spoke wheels.
• Silent Braking: Multi-layer rubberized shims provide effective noise damping.
• Hardware Included: Comes with stainless steel installation hardware and high-temperature ceramic lubricant.
• Application Specific: Engineered for a direct bolt-on fitment for 2010-2022 Lexus and Toyota rear brake systems.
• Manufacturer Part Number: CRK5503

Fits select 2003-2011 Acura TL and Honda Element.

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK5399) provides a complete rear braking solution for daily drivers seeking a clean, quiet, and reliable upgrade. This kit is engineered to replace worn OE components with ceramic pads and rotors that are specifically treated to resist rust. The Geomet 360 coating is applied to the entire rotor surface, including the cooling vanes, to prevent corrosion without impacting stopping performance.

The Z17 Evolution ceramic pads utilize a low-dust formula that has been validated through independent third-party testing in heavy city traffic. To ensure silent operation, the pads are equipped with multi-layer rubberized shims that insulate noise and vibration. This comprehensive kit includes all necessary stainless steel hardware and high-temperature lubricant for a professional-grade installation.

• Z17 Evolution low-dust ceramic brake pads for cleaner wheels and quiet operation
• Genuine Geomet 360 coating provides full-surface protection against rust and corrosion
• Rotors manufactured to precise OE specifications for fitment and balance
• Multi-layer rubberized shims for virtually noise-free braking
• Includes stainless steel installation hardware and ceramic brake lubricant
• Manufacturer Part Number: CRK5399

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK5368) provides a comprehensive, bolt-on solution for refreshing the rear braking performance of your daily driver. This kit is engineered for select 2011-2017 Honda Accord and 2011-2014 Acura TSX models, offering an affordable replacement for worn factory components without sacrificing reliability.

The included Z17 Evolution ceramic brake pads feature a low-dust formula validated through 3rd-party on-vehicle testing to keep your wheels cleaner for longer. To ensure a quiet commute, these pads are fitted with multi-layer rubberized shims that effectively insulate noise. The rotors are fully treated with a Genuine GEOMET 360 coating, protecting against rust and corrosion to maintain a clean appearance behind your wheels while meeting original equipment specifications for fit and performance.

• Low-Dust Ceramic Formula: Validated through third-party testing in heavy city traffic to ensure clean, reliable stopping.
• GEOMET 360 Coating: Applied to the entire rotor surface to provide long-lasting protection against oxidation and corrosion.
• Quiet Operation: Multi-layer rubberized shims provide virtually noise-free braking by dampening vibration.
• Direct OE Replacement: Rotors are manufactured to factory specifications for a seamless installation.
• Complete Installation Kit: Includes stainless-steel hardware and high-temperature ceramic brake lubricant.
• Manufacturer Part Number: CRK5368

Fits select 2009-2022 Pontiac Vibe and Toyota Corolla, Matrix, Prius AWD-e, and Prius Prime.

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK4736) is a comprehensive solution designed to refresh the stopping power and appearance of your daily driver. This kit addresses the common issues of brake dust and rotor corrosion by pairing Z17 Low-Dust ceramic brake pads with fully Geomet 360 coated rotors. Each component is engineered to original equipment specifications for a precise fit and predictable performance.

• Z17 Ceramic Pads: Formulated for low-dust performance and validated through 3rd-party on-vehicle testing in heavy city traffic.
• Noise Reduction: Features multi-layer rubberized shims that effectively insulate noise for virtually silent braking.
• Geomet 360 Coating: The rotors are fully treated with a thin, durable layer of Genuine GEOMET 360 to protect against rust and corrosion without impacting braking efficiency.
• Complete Installation Hardware: Includes premium stainless-steel hardware and high-temperature ceramic brake lubricant for a professional-grade service.

Each kit contains (2) Geomet coated rear rotors, (1) set of Z17 ceramic rear pads, all necessary mounting hardware, and lubricant.

Fits 2006-2018 Toyota RAV4 and 2010-2012 Lexus HS250h.

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK4671) is a complete rear braking solution designed for daily-driven vehicles. This kit replaces worn factory components with low-dust ceramic pads and corrosion-resistant rotors to restore stopping power and maintain a clean appearance behind your wheels.

• Z17 Evolution Ceramic Pads: Engineered for low-dust performance to keep wheels cleaner for longer. Multi-layer rubberized shims insulate against vibration for virtually silent braking.
• Geomet 360 Coated Rotors: Each rotor is fully treated with a genuine GEOMET 360 coating to protect against rust and corrosion without impacting braking performance. Rotors are manufactured to original equipment specifications for a precise fit.
• Installation Hardware: Includes a complete set of stainless steel hardware and high-temperature ceramic brake lubricant for a professional-grade installation.
• Validated Performance: The ceramic pad formula is third-party tested on-vehicle to ensure reliable stopping power in real-world traffic conditions.

Kit Includes: (2) Rear Geomet coated brake rotors, (1) Set of Z17 low-dust ceramic brake pads, stainless steel installation hardware, and ceramic lubricant.

Fits select 2006-2019 Toyota RAV4, Matrix, Mirai, and Corolla iM, Pontiac Vibe, and Scion tC and iM. The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK3054) is a comprehensive front-axle upgrade designed for the daily driver. This kit replaces worn factory components with low-dust ceramic pads and rust-resistant rotors, maintaining original equipment specifications for a precise fit and reliable stopping power.

• Z17 Evolution Ceramic Pads: Formulated for low-dust performance, these ceramic pads are 3rd-party validated to keep wheels cleaner and feature multi-layer rubberized shims to eliminate braking noise.
• GEOMET 360 Coated Rotors: Each rotor is treated with a Genuine GEOMET 360 coating to provide superior protection against rust and corrosion, including in the cooling vanes and internal surfaces.
• Direct OE Replacement: Rotors are manufactured to strict tolerances to ensure proper balance and smooth operation without the need for modifications.
• Complete Hardware Kit: Includes stainless steel installation hardware and high-temperature ceramic brake lubricant for a professional-grade installation.
• MPN: CRK3054

Fits select 2006-2018 Lexus HS250h, Scion xB, Toyota Prius V, and RAV4.

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK258) provides a complete front brake solution for daily-driven vehicles. This kit replaces worn factory components with ceramic pads and corrosion-resistant rotors to restore stopping performance while maintaining a clean aesthetic behind the wheels.

The Z17 Evolution ceramic brake pads utilize a low-dust formula, validated through on-vehicle testing to keep wheels cleaner compared to standard semi-metallic pads. To ensure quiet operation, the pads feature multi-layer rubberized shims that insulate against noise and vibration. The included rotors are fully treated with a Genuine GEOMET 360 coating, providing a durable barrier against rust and corrosion without diminishing braking performance.

• Z17 Low-Dust Ceramic Pads: Formulated for reliable stopping power with minimal dust and noise.
• Geomet 360 Coated Rotors: Protective finish prevents rust for an extended lifespan and a clean appearance.
• OE Specifications: Rotors are manufactured to original equipment dimensions for precise fitment and balance.
• Stainless-Steel Hardware: Includes all necessary installation hardware and high-temperature ceramic brake lubricant.
• Manufacturer Part Number: CRK258

Fits select 2007-2020 Cadillac, Chevrolet, and GMC vehicles, including Escalade, Silverado 1500, Tahoe, and Sierra 1500.

The Power Stop Z17 Evolution Geomet Coated Brake Kit is an all-in-one solution for daily drivers looking to refresh their braking performance while eliminating unsightly rust and excessive dust. This front axle kit replaces worn factory components with precision-engineered parts that meet original equipment specifications, ensuring a direct bolt-on installation and factory-level fitment.

• Geomet 360 Coated Rotors: Every rotor is fully treated with a thin layer of Genuine GEOMET 360 coating to protect against corrosion and rust, maintaining a clean look behind open wheels.
• Z17 Low-Dust Ceramic Pads: The ceramic formula is designed to keep wheels clean and has been validated through on-vehicle third-party testing in high-density traffic.
• Noise-Free Braking: Features multi-layer rubberized shims that effectively insulate noise for virtually silent operation during your daily commute.
• Complete Installation Kit: Includes stainless steel hardware and high-temperature ceramic brake lubricant to ensure a professional-grade service.
• MPN: CRK2069

Fits select 2002-2021 Acura and Honda models, including ILX, Accord, Civic, CR-V, CR-Z, and Element.

The Power Stop Z17 Evolution Geomet Coated Brake Kit (CRK1043) provides a complete front-axle solution for daily commuters. This kit replaces worn factory components with low-dust ceramic pads and rotors treated with a genuine GEOMET 360 coating. Designed to maintain a clean appearance behind open-spoke wheels, the coating protects the entire rotor surface against rust and corrosion without impacting braking efficiency.

Each kit includes Z17 Evolution ceramic brake pads, which feature a low-dust formula validated through third-party on-vehicle testing in heavy city traffic. To ensure a quiet ride, these pads are equipped with multi-layer rubberized shims that insulate against noise and vibration. This kit comes with all necessary stainless-steel hardware and high-temperature lubricant for a professional-grade installation.

• Front axle brake kit: Power Stop Z17 Evolution series
• Low-dust ceramic brake pads validated for daily driving
• Genuine GEOMET 360 coated rotors for maximum rust prevention
• Multi-layer rubberized shims for noise-free operation
• Includes stainless-steel hardware and high-temp ceramic lubricant
• Designed to original equipment specifications
• Manufacturer Part Number: CRK1043

Fits 2005-2014 Ford Mustang Base, Bullitt, GT, and Shelby GT models.

The Power Stop Z26 Front Big Brake Conversion Kit (BBK-MUST-001R) is a comprehensive performance upgrade designed for drivers who require increased stopping power and superior thermal management. This direct bolt-on system replaces the factory front brakes with oversized 355mm (14-inch) rotors, providing the mechanical leverage needed to shorten stopping distances during spirited driving.

This kit features 4-piston calipers finished in a high-visibility red powder coating for maximum corrosion resistance. The included Z26 Extreme Street Performance pads use a proprietary carbon fiber ceramic friction compound to deliver high-torque braking without the heavy dust or noise common in race-spec pads. To complete the conversion, Power Stop includes braided stainless steel extended hoses to improve hydraulic pressure efficiency and eliminate the spongy pedal feel of factory rubber lines.

• 355mm (14") Performance Rotors: Drilled and slotted to evacuate gases and dissipate heat; zinc-plated to prevent rust.
• 4-Piston Calipers: Durable red powder-coated finish with Power Stop logo for long-term aesthetic and functional protection.
• Z26 Carbon Fiber Ceramic Pads: High-performance friction material provides aggressive bite with low-dust and noise-free operation.
• Stainless Steel Braided Hoses: Improves pedal response by reducing expansion under high-pressure braking.
• Installation Hardware: Includes all necessary stainless steel hardware and high-temp brake lubricant for a professional install.

Fits 2007-2018 Jeep Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited.

The Power Stop Z36 Big Brake Upgrade Kit is engineered for Jeep Wrangler JK owners who have added the weight of lift kits, oversized tires, or heavy armor. This complete front and rear conversion provides the increased leverage and thermal capacity needed for confident stopping power under load. By increasing the rotor diameter to 13.5 inches in the front and 14.25 inches in the rear, this kit significantly enhances braking torque compared to the factory OE setup.

Each kit includes red powder-coated calipers and heavy-duty brackets designed for a direct bolt-on installation using factory mounting points. The rotors are cross-drilled and slotted to facilitate cooling and gas evacuation, then zinc-plated to resist corrosion in harsh environments. To handle the increased thermal loads, Power Stop includes Z36 Extreme Truck & Tow pads, featuring a carbon-fiber ceramic friction compound that delivers low-dust, noise-free performance even during heavy towing or steep off-road descents.

• Front Rotors: 13.5-inch diameter, drilled, slotted, and zinc-plated
• Rear Rotors: 14.25-inch diameter, drilled, slotted, and zinc-plated
• Calipers: Red powder-coated finish with heavy-duty caliper brackets
• Brake Pads: Z36 Extreme Truck & Tow carbon-fiber ceramic compound
• Hardware: Includes high-temperature brake lubricant
• MPN: BBK-JK-002R

Fits 2007-2018 Jeep Wrangler and Wrangler JK models, including Rubicon, Sahara, Sport, X, and Unlimited trims.

The Power Stop Z36 Big Brake Conversion Kit (BBK-JK-001) is engineered for Jeep JK owners who have added the weight of oversized tires, lift kits, or heavy armor and need significantly improved stopping leverage. This kit increases the effective radius of the braking system by utilizing massive 13.5-inch front and 14.25-inch rear rotors, providing the thermal capacity and torque required for off-road use and towing.

Designed as a direct bolt-on upgrade, this kit includes heavy-duty caliper brackets that allow you to retain your factory calipers. This simplifies installation by eliminating the need to open the hydraulic system or bleed the ABS. The oversized rotors are drilled and slotted for superior heat dissipation and gas venting, then finished with a silver zinc plating to resist corrosion. Paired with Z36 Extreme Truck & Tow carbon-fiber ceramic pads, this system delivers fade-free performance without the heavy dust associated with high-friction metallic pads.

• Front Rotors: 13.5-inch diameter, drilled, slotted, and zinc-plated
• Rear Rotors: 14.25-inch diameter, drilled, slotted, and zinc-plated
• Brake Pads: Z36 Extreme Truck & Tow Carbon-Fiber Ceramic compound
• Brackets: Heavy-duty relocation brackets for OE calipers
• Compatibility: Reuses factory calipers; no hydraulic bleeding required
• Includes: High-temperature brake lubricant and hardware
• Manufacturer Part Number: BBK-JK-001

Fits 1965-1982 Chevrolet Corvette models including Base, Stingray, and special editions.

Power Stop Autospecialty parking brake shoes (B741) are engineered as a reliable replacement for worn OE components. These shoes are manufactured from 100% new steel and feature a black coating to resist rust and corrosion in the harsh wheel-end environment. To ensure a perfect fit and immediate engagement, every shoe is precision cam ground to match the drum diameter exactly.

Designed specifically for parking brake applications, the semi-metallic friction formula is post-cured for increased static holding power. With an AMECA HH rating, these shoes provide the consistent stopping force needed to keep your vehicle secure on an incline without noise or chatter.

• Manufacturer Part Number: B741
• AMECA Rating: HH for superior holding power
• Construction: 100% new steel with rust-resistant black coating
• Friction Material: Semi-metallic formula, 100% asbestos-free and copper-free
• Fitment: Precision cam ground for proper engagement and noise-free operation
• Included: Chamfered edges to prevent chatter

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Charger, and Magnum models.

Power Stop Evolution drilled and slotted rotors provide a high-performance, bolt-on upgrade for your rear braking system. These rotors are precision-machined to address the thermal stresses of spirited driving. Cross-drilled holes allow for maximum heat dissipation to prevent brake fade, while rounded slots effectively sweep away gas, dust, and moisture. This ensures a clean friction contact patch and consistent bite in both wet and dry conditions.

• Precision cross-drilled for maximum cooling and optimum thermal performance
• Rounded slots evacuate debris and gases to maintain a clean rotor surface
• Silver zinc dichromate plating resists rust and corrosion for long-term durability
• Chamfered drill holes help minimize the risk of stress cracking during high-heat cycles
• 100% dynamic mill balanced for smooth, quiet, and vibration-free operation
• Vane count and weight are matched to original equipment designs for reliable fitment
• Direct bolt-on installation requires no special vehicle modifications
• Sold as a pair for the rear axle; Manufacturer Part Number: AR8775XPR

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Charger, and Magnum models. These Power Stop Evolution drilled and slotted rotors provide a high-performance bolt-on upgrade to your vehicle's factory braking system. Designed for enthusiasts seeking better thermal management and more consistent stopping power, these rotors require no modifications for installation.

Precision-machined with cross-drilled holes, these rotors maximize airflow to dissipate heat during aggressive driving or extreme conditions. The rounded slots help sweep away gases, dust, and moisture, maintaining a clean contact patch between the pad and rotor. Every rotor is finished with silver zinc dichromate plating to resist rust and maintain a clean appearance behind your wheels.

• Precision cross-drilled holes for maximum cooling and thermal resistance
• Rounded slots effectively evacuate brake dust, gas, and water
• Chamfered drill holes minimize stress cracking under high heat
• Silver zinc dichromate plating provides superior corrosion protection
• 100% dynamic mill balanced for smooth, vibration-free operation
• Weight and vane count engineered to match original equipment specifications
• Manufactured to strict tolerances for DTV and runout
• Manufacturer Part Number: AR8773XPR

Fits 2003-2008 Dodge Ram 3500.

Replace your worn factory rotor with the Power Stop Evolution Drilled & Slotted Front Right Rotor (AR8771XR). Engineered to handle the heavy-duty demands of the Dodge Ram 3500, this rotor provides enhanced cooling and consistent braking performance during heavy hauling, towing, or daily driving.

• Drilled for Cooling: Precision-drilled holes allow for heat dissipation, helping to maintain lower operating temperatures and reduce the risk of brake fade.
• Slotted for Bite: Rounded slots sweep away gas, dust, and moisture to ensure a clean contact surface between the rotor and brake pad for improved pad bite.
• Silver Zinc Plating: Treated with a silver zinc finish to protect against rust and corrosion, maintaining a clean look behind your wheels.
• Direct OE Fitment: Designed as a bolt-on replacement for the factory front right rotor, ensuring a precise fit without the need for modifications.
• Position: Front Right
• MPN: AR8771XR

Fits 2003-2008 Dodge Ram 1500, 2500, and 3500 models.

Upgrade your truck's braking performance and cooling capacity with Power Stop Drilled and Slotted Front Rotors. These rotors are engineered as a direct bolt-on replacement for factory hardware, specifically designed to handle the thermal demands of heavy-duty hauling and towing. Precision cross-drilled holes maximize airflow to dissipate heat, while rounded slots sweep away brake dust, gases, and moisture to maintain a clean friction contact patch between the pad and rotor.

Each rotor (MPN: AR8771XPR) is finished with silver zinc dichromate plating to provide superior resistance against rust and corrosion. To ensure a smooth, vibration-free ride, every unit is 100% dynamic mill balanced and manufactured to strict tolerances for Disc Thickness Variation (DTV) and runout.

• Precision Drilled: Cross-drilled holes provide maximum cooling during extreme braking conditions.
• Slotted Surface: Rounded slots maintain a clean contact patch and reduce brake fade.
• Corrosion Resistance: Silver zinc dichromate plating protects against rust.
• Reliable Construction: Chamfered drill holes and matched vane counts minimize stress cracking and ensure OE-level airflow.
• Direct Fitment: Designed to bolt onto factory mounting points with no modifications required.
• Dynamic Balance: Mill balanced for quiet, smooth operation and reduced runout.
• Sold as a Pair: Includes two front brake rotors.

Fits 2003-2008 Dodge Ram 3500 models.

Upgrade your heavy-duty truck’s braking performance with the Power Stop Evolution Drilled & Slotted brake rotor (AR8771XL). Designed specifically for the front left position, this rotor is engineered to handle the thermal demands of towing and hauling. The precision-drilled holes significantly reduce rotor temperatures during extreme conditions, while the rounded slots effectively sweep away gas, debris, and moisture to maintain a clean pad-to-rotor contact patch.

This performance rotor features a silver zinc dichromate plating to help protect against rust and corrosion, ensuring longevity and a clean look behind your wheels. It is a direct bolt-on replacement for factory equipment, maintaining OE tolerances for a hassle-free installation.

• Position: Front Left
• Design: Drilled and Slotted for maximum cooling and outgassing
• Finish: Silver Zinc Plated for corrosion resistance
• Manufacturer Part Number: AR8771XL
• Fitment: 2003-2008 Dodge Ram 3500