Fits select 2010-2014 Toyota Tacoma with 8-inch IFS front differentials.

The Revolution Gear & Axle Master Install Kit is a comprehensive solution for technicians and DIYers performing a ring and pinion gear swap or a complete differential rebuild. This kit eliminates the guesswork by providing the essential components required to set pinion depth and backlash for a quiet, reliable gear mesh.

Each kit is engineered to meet or exceed OE specifications, ensuring proper fitment and long-term durability under the stresses of daily driving and off-road use. By replacing all critical wear components during the gear installation, you reduce the risk of premature failure and ensure your Tacoma's front drivetrain operates at peak efficiency.

• Complete set of carrier and pinion bearings
• Pinion seal and pinion nut
• Crush sleeve (where applicable)
• Comprehensive shim kit for precise adjustments
• Ring gear bolts
• Gear marking compound and applicator brush
• Manufacturer Part Number: 35-2040

Fits 1999-2016 Ford trucks equipped with the Super Dana 60 front axle. This Revolution Gear & Axle Master Install Kit (MPN: 35-2034-S) provides the essential components needed for a professional ring and pinion installation or a complete differential overhaul.

Designed for reliability and precision, this kit features a crush sleeve configuration to match factory specifications. It includes the critical hardware required to properly set pinion depth, preload, and backlash, ensuring long-term gear life and quiet operation under heavy loads. This is the comprehensive solution for technicians and DIY builders performing gear ratio changes or front-end service.

• Fits Axle: Ford Super Dana 60 Front (1999-2016)
• Kit Type: Master Install Kit / Overhaul Kit
• Design: Crush Sleeve Style
• Components Include: Pinion bearings, carrier bearings, pinion seal, shim kit, crush sleeve, ring gear bolts, and marking compound
• Manufacturer Part Number: 35-2034-S

The Revolution Gear & Axle Master Install Kit (MPN: 35-2034) provides the professional-grade components required for a complete ring and pinion setup on Dana 60 front or rear axles. This comprehensive overhaul kit is engineered to help technicians and builders achieve precise pinion depth and carrier backlash settings for optimal gear longevity and quiet operation.

• Fits Dana 60 front and rear axle configurations
• Includes premium pinion and carrier bearings and races for high-load durability
• Comprehensive shim kit for exact tolerances and gear mesh patterns
• New pinion seal and pinion nut included to prevent leaks and ensure proper torque
• Comes with gear marking compound, applicator brush, and thread locker for a complete install
• Manufacturer Part Number: 35-2034

The Revolution Gear & Axle Master Install Kit (MPN 35-2033) is a comprehensive solution for technicians and DIY builders performing a ring and pinion swap or a complete differential overhaul. Specifically engineered for the pre-2003 Dana 44 rear axle, this kit provides the critical hardware needed to ensure proper gear mesh, correct bearing preload, and a leak-free seal.

By replacing worn OE components with high-quality bearings and seals, you restore the structural integrity of the differential housing assembly. This kit is designed to withstand the increased torque loads associated with gear ratio changes and larger tire fitments, making it a vital upgrade for maintaining drivetrain reliability.

• Fits pre-2003 Dana 44 rear axle applications
• Includes premium carrier bearings and races
• Includes pinion bearings and races
• Complete with pinion seal, crush sleeve (where applicable), and pinion nut
• Includes ring gear bolts and a comprehensive shim kit for precise setup
• Includes gear marking compound and brush for pattern verification
• Manufacturer Part Number: 35-2033

Fits 1972-1996 Jeep CJ, YJ, and XJ models equipped with a Dana 30 front axle.

The Revolution Gear & Axle Master Overhaul Kit (35-2032) provides the essential hardware required for a professional ring and pinion installation or a complete front differential rebuild. This kit is designed to ensure proper gear patterning and long-term reliability by replacing high-wear internal components with precision-engineered parts that meet or exceed OE specifications.

• Designed specifically for Dana 30 front axle housings
• Includes high-quality carrier bearings and races
• Includes pinion bearings and races
• Pinion seal, pinion nut, and crush sleeve included
• Complete shim kit for precise backlash and pinion depth adjustment
• Ring gear bolts and gear marking compound with applicator brush included
• Manufacturer Part Number: 35-2032

Fits 1997-2006 Jeep Wrangler TJ models equipped with a Dana 30 front axle.

The Revolution Gear & Axle Master Overhaul Kit (MPN 35-2031) is a comprehensive solution for technicians and DIYers performing a ring and pinion gear swap or a complete differential rebuild. This kit provides the critical hardware and high-quality bearings required to ensure precise gear mesh, proper backlash, and long-term reliability for your Jeep's front drivetrain.

• Premium pinion and carrier bearings and races
• High-quality pinion seal and pinion nut
• Comprehensive shim kit for accurate pinion depth and carrier preload adjustment
• Ring gear bolts
• Gear marking compound with applicator brush
• Thread locker and RTV silicone gasket maker

Fits select 2019-2023 Chrysler vehicles equipped with the 9.25-inch ZF rear differential. This Revolution Gear & Axle Master Install Kit provides the professional-grade components required for a complete ring and pinion gear swap or axle overhaul. Designed to meet or exceed OE specifications, this kit ensures precise setup and long-term durability for your drivetrain.

• Includes high-quality bearings and races for smooth operation
• Complete shim kit for accurate pinion depth and backlash adjustment
• Includes new pinion seal and crush sleeve for a leak-free installation
• Supplied with gear marking compound and brush for tooth-pattern verification
• Includes thread locker and gasket sealant where required
• Manufacturer Part Number: 35-2028-19

Fits select 2003-2010 GM and Dodge trucks equipped with the 11.5-inch rear axle.

The Revolution Gear & Axle Master Install Kit (35-2024) provides the essential hardware required for a professional ring and pinion installation or a complete rear differential overhaul. Engineered specifically for the AAM 11.5-inch rear axle found in heavy-duty applications, this kit ensures you have the necessary components to achieve proper gear mesh and reliable performance under high-torque conditions. Whether you are re-gearing for larger tires or performing a maintenance rebuild, this kit is designed for technicians and DIYers who require precise tolerances.

• Application: 11.5-inch rear axles
• Compatibility: Select 2003-2010 GM and Dodge heavy-duty platforms
• Kit Type: Master Install Kit for ring and pinion setup
• Manufacturer Part Number: 35-2024

Fits select 1998-2004 GM vehicles equipped with the 14-Bolt 10.5-inch rear differential.

The Revolution Gear & Axle Master Install Kit (35-2023B) is a comprehensive solution for technicians and DIYers performing a ring and pinion swap or a complete differential overhaul. This kit simplifies the installation process by providing the necessary components to set proper pinion depth, bearing preload, and gear backlash, ensuring quiet operation and long-term durability for your heavy-duty rear end.

• Designed specifically for GM 14-Bolt 10.5" rear axles
• Includes high-quality carrier and pinion bearings and races
• Features a comprehensive shim suite for precise gear alignment
• Includes pinion seal, crush sleeve, and gear marking compound
• Engineered for 1998-2004 model year applications
• Manufacturer Part Number: 35-2023B

Fits select 1999-2008 GM vehicles equipped with the 8.6-inch 10-bolt rear differential.

Ensure a precise gear setup and long-term reliability with the Revolution Gear & Axle Master Install Kit. This comprehensive kit (MPN 35-2022) provides the essential components required for a professional ring and pinion installation or a complete differential overhaul. By replacing worn bearings and seals during a gear swap, you eliminate the risk of noise and premature failure while ensuring proper component alignment.

Revolution Gear & Axle master kits are engineered for technicians who require exact tolerances. The kit includes high-quality bearings, seals, and a full shim suite to achieve accurate pinion depth and carrier backlash, providing everything needed to complete the job correctly the first time.

• Application: GM 8.6-inch 10-Bolt Rear End
• Year Range: 1999-2008
• Kit Type: Master Install Kit
• Components: Pinion bearings, carrier bearings, pinion seal, ring gear bolts, and shim kit
• Includes gear marking compound and applicator brush
• Manufacturer Part Number: 35-2022